igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	13.14 seconds
Igt-Version	IGT-Version: 2.4-ge68d82b44 (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18484-g21b42374be17+ x86_64)
Out	Using IGT_SRANDOM=1778685309 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811a5417b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x3a/0x70 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1747/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881da0f57b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1b0 [snd_hda_core] azx_probe_continue+0x25e/0xb20 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x239/0x740 worker_thread+0x200/0x3f0 kthread+0x10d/0x150 ret_from_fork+0x3bd/0x470 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff8881da0f57b8 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x9a0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] drm_dp_read_dpcd_caps+0x35/0x210 [drm_display_helper] intel_dp_init_connector+0x9fc/0x1530 [i915] intel_ddi_init+0xd17/0x1250 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x210/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810ea417b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x3a/0x70 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1747/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (13.142s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (13.142s)
Dmesg	<6> [281.126470] Console: switching to colour dummy device 80x25 <6> [281.128025] [IGT] i915_pm_rpm: executing <7> [281.131415] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.132271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [281.132284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [281.133331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.133631] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.134176] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.134606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.134619] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [281.134628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [281.134674] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [281.135792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.136199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.138400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [281.138414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.138426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.138564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [281.138575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [281.143329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [281.143457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [281.143468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [281.144502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.145474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.146129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.146626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.146637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.147038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.150334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.150346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.150824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [281.150952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [281.150977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [281.155526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [281.155651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [281.155662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [281.156381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.156796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.157365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.157765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.157775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.158167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.161436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.161446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.161911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [281.171607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [281.171622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [281.176333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [281.177338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [281.177350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [281.178070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.178410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.179027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.179466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.179476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.179882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.183139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.183149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.183588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [281.184576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [281.184589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [281.189137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [281.190076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [281.190088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [281.190795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.191178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.191733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.192162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.192172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.192575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.195853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.195863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.196310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [281.196960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [281.196972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [281.197440] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [281.197854] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [281.198243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [281.198683] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.198695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [281.198704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [281.198745] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [281.199146] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [281.199551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [281.200558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [281.200570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.200581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.200625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [281.200636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [281.205118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [281.205155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [281.205164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [281.205698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.205987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [281.206486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [281.206795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.206805] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.207100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [281.210197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [281.210205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [281.210486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [281.210518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [281.210525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [281.214887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [281.214917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [281.214924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [281.215437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.215669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [281.216127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [281.216438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.216445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [281.216676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [281.219701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [281.219709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [281.220019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [281.220741] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145] <7> [281.355452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.264181] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [282.264483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [282.264826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [282.265154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [282.265435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [282.265708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [282.266006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [282.266324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [282.266598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.266901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [282.267231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.267506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.267801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.268125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.268399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.268672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.268991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.269302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.269579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [282.269873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.270185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.270462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [282.270737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.271030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.271343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.271619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.271915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.272257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.272535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.272835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.273245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [282.273606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.273917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [282.274255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [282.274606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [282.274916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [282.275247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [282.275529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [282.275840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [282.276176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [282.276455] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [282.276731] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [282.277085] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [282.277414] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [282.277681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [282.277977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [282.278335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.278604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.278909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.279194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.279494] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [282.279825] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [282.280143] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [282.280418] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [282.280690] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [282.281128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [282.281548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [282.281976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [282.282393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [282.283059] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [282.285064] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [282.490190] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [282.493545] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [282.511223] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [282.511774] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [282.513074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [282.513163] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [282.514148] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [282.565946] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [282.565906] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [282.567046] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [282.567594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.568057] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [282.571319] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [282.571712] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [282.572867] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [282.573773] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [282.575366] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [282.578273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [282.579441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [282.580577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [282.581841] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [282.582902] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [282.583951] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [282.584970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [282.585991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [282.586994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [282.588063] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [282.589954] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [282.592970] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [282.594119] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [282.698542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [282.700474] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.701666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.703603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.706155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [282.727573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [282.808646] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [282.810006] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [282.811564] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [282.812839] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [282.814241] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [282.815225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [282.816390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [282.817385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [282.818682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [282.820471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [282.821610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [282.823112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [282.824633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [282.826325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [282.827844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [282.829065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [282.830360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [282.831899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [282.833435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [282.834906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [282.836451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [282.837725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [282.838758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [282.840234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [282.841746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [282.843247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [282.844752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [282.846194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [282.847605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [282.849078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [282.850594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [282.852087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [282.853565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [282.854907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [282.855930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [282.857410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [282.858910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [282.860410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [282.861928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [282.863135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [282.864245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [282.865768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [282.867276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [282.868822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [282.870318] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [282.872037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [282.873192] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [282.874225] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [282.875422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [282.876381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [282.877506] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [282.878520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [282.879691] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.880978] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [282.882305] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [282.883343] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [282.884395] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [282.885391] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [282.886428] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [282.887420] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [282.888524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [282.889600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [282.891107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [282.892617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [282.894118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [282.895623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [282.897130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [282.898698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [282.900231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [282.901779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [282.903300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [282.904320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [282.905331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [282.906340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [282.907352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [282.908352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [282.909363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [282.910366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [282.911356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [282.912355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [282.913109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [282.913866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [282.914596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [282.915354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [282.916096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [282.916862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [282.917583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [282.918350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [282.919099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [282.919868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [282.920609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [282.921358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [282.921957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [282.922543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [282.923148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [282.923733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [282.924337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [282.924940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [282.925526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [282.926131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [282.926713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [282.927316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [282.927923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [282.928495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [282.929097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [282.929680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [282.930302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [282.930807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [282.931298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [282.931806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [282.943860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [282.952827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [282.953426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.955091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [282.955780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.956632] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [282.957566] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [282.957947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [282.958247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [282.958488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [282.958725] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [282.959032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [282.959389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [282.959743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [282.960119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [282.960707] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [282.961432] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [282.962004] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [282.962510] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (105 ms remaining) <7> [283.074233] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [283.164112] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.165265] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [283.166384] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [283.215200] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [283.216302] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [283.217309] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [283.218423] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [283.376731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.378734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [283.392280] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.398681] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [283.400040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [283.409074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [283.410613] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [283.415416] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [283.417267] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [283.418982] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [283.423295] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [283.424774] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [283.426257] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [283.430692] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [283.432216] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [283.433748] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [283.438097] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [283.439532] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [283.441047] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [283.447075] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [283.448594] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [283.451250] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [283.454539] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [283.455978] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [283.459243] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [283.487115] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [283.494657] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [283.496193] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [283.500203] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [283.500208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <6> [283.506232] [IGT] i915_pm_rpm: starting subtest module-reload <7> [283.506089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [283.508222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.509609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [283.511449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [283.513263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.513302] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.515019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [283.521397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [283.521440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [283.523650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [283.530172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [283.532142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.533564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [283.535152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [283.536652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.536689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [283.538119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [283.543774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [283.543896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [283.650265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.651157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.663980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.690430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.690883] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.703970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.781509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.785216] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [283.792752] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.793238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.793638] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [283.794099] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.794709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.795318] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [283.795937] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.796524] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.797147] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [283.799780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.884296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.885398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [283.886705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [283.887516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [283.890547] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [283.890745] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [283.891860] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [283.892592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [283.893619] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [283.897114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [283.898954] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [283.906005] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [283.920683] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [283.922569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [283.923757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [283.924510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [283.925190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [283.925883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [283.926575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [283.927325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [283.928067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [283.928771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [283.929488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [283.930227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [283.930972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [283.931483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [283.932211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [283.932957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [283.933679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [283.934434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [283.935166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [283.935855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [283.936457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [283.937027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [283.937528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [283.938099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [283.938593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [283.939089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [283.939581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [283.940095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [283.940589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [283.941111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [283.941604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [283.942095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [283.942611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [283.943121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [283.943618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [283.944124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [283.944615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [283.945114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [283.945609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [283.946121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [283.946620] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [283.947123] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [283.947761] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [283.948344] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [283.948929] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [283.949647] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [283.950374] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [283.951124] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [283.951862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [283.952432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [283.952946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [283.953477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [283.954713] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [284.162198] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [284.165523] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [284.174220] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [284.174760] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [284.175762] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [284.176266] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [284.177385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [284.228468] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.228583] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [284.229839] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [284.231676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [284.232261] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [284.232777] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [284.237393] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [284.238142] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [284.240043] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.245270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [284.246582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [284.247784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [284.249009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [284.250239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [284.251605] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [284.252970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [284.254402] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [284.256078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [284.257672] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [284.260499] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [284.338784] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [284.392225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [284.421251] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [284.429633] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [284.443209] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [284.450500] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [284.474165] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (256 ms remaining) <7> [284.738412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [284.769005] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [285.412713] [IGT] Reloading i915 w/o display <5> [286.472318] Setting dangerous option force_probe - tainting kernel <6> [286.486980] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [286.489293] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [286.489750] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [286.490067] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [286.490480] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [286.491001] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [286.491641] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [286.492042] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [286.493316] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [286.493599] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [286.493872] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [286.494174] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [286.494185] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [286.494997] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [286.495042] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [286.495360] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [286.495642] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a <7> [286.495935] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [286.496609] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [286.497005] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [286.497297] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [286.497662] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [286.497982] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [286.505909] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [286.506244] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [286.506530] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [286.506815] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [286.507152] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.507611] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.508081] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [286.508544] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.509010] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.509464] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [286.509929] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [286.510387] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [286.510841] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [286.511303] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [286.511754] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [286.512217] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [286.513918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [286.514412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [286.514900] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [286.515401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [286.515910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [286.516412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [286.516892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [286.517357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [286.517821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [286.518310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [286.518773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [286.519251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [286.519704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [286.520176] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [286.520624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [286.521098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.521559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.522040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [286.522489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.522946] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [286.523402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.523861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [286.524319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.524771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [286.525241] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [286.525723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.526305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.526812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [286.527293] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.527751] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [286.528214] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [286.528668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.529262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.529722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.530195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.530675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.531250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.531716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.532199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.532666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.534684] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [286.537078] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [286.537585] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [286.538086] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [286.539166] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [286.540094] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [286.540677] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [286.541808] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [286.542759] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [286.542879] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [286.543354] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [286.543824] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [286.544252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [286.544706] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [286.545188] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [286.545648] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [286.546135] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [286.546598] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [286.547077] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [286.547543] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [286.548012] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [286.548470] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [286.548934] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [286.549392] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [286.549846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [286.556318] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [286.560472] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.561003] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [286.561482] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [286.572906] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [286.573256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [286.573562] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [286.573914] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [286.574383] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [286.574833] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [286.575301] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [286.575739] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [286.576201] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [286.576664] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [286.577279] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [286.577782] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.578234] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.578677] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.579142] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.579567] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.580052] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.580785] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [286.581270] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.581762] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [286.592488] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.593240] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [286.593590] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.802998] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.804113] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.806043] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.810679] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.832703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.832754] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [286.832788] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [286.836117] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.837618] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.839173] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [286.842774] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [286.844585] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.847049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.848692] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.850162] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.851825] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.853272] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.856668] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.859609] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.861280] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [286.868034] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.869981] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [286.871487] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.874785] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.876457] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [286.880178] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.882241] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [286.883695] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.887429] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [286.888968] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [286.890049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [286.892435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [286.895201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [286.897135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [286.899022] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [286.900785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [286.902540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [286.904224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [286.905682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [286.906688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [286.907760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [286.908991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [286.910149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.911155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.912070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [286.913026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [286.913951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [286.914751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.915444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [286.916219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [286.916836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [286.917698] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.918743] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.919778] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.920808] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.921769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [286.922785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [286.923789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [286.924650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [286.925419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [286.925987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [286.926480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [286.927006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [286.927515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [286.928059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [286.928555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [286.929076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [286.929577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [286.930107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [286.930754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [286.931325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [286.931831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [286.932370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.932767] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.933181] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.933840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [286.934279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [286.934880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [286.935481] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.936204] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.936737] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.937309] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.937928] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.943143] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.943704] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.944239] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.973723] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.974043] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.974309] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.974565] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.974825] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [286.975146] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [286.975591] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [286.976055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [286.976511] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [286.976987] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [286.977447] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [286.977913] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [286.978365] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [286.978817] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [286.979297] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [286.979748] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [286.980216] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [286.980672] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [286.981283] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [286.982122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [286.982603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [286.983101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [286.984585] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [286.985460] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [286.986195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [286.986956] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.993809] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [286.995933] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [286.996319] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [286.997256] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [287.000749] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [287.000952] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [287.002601] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [287.008900] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [287.009072] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [287.010575] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [287.010728] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [287.013036] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [287.015951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [287.016117] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [287.017962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [287.018115] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [287.024666] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [287.062044] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [287.073024] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35 <7> [287.077465] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [287.083886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [287.084393] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.085603] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [287.086106] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [287.086543] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [287.087665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [287.088140] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.088600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [287.089060] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.089504] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [287.089972] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [287.090721] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.091776] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.092748] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [287.093266] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.097667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [287.097686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [287.098212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected <7> [287.098234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [287.098244] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2 <7> [287.098275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [287.098286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [287.098718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [287.098731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [287.098742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [287.099229] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [287.099445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [287.099460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [287.099471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [287.099953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [287.099966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [287.099977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [287.100409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [287.100422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.100431] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [287.100440] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [287.100447] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [287.100455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [287.100463] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [287.100523] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.100540] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.100634] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.100645] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.104663] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [287.105243] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [287.105709] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [287.106184] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [287.107620] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [287.108155] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.108121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [287.108947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [287.108973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [287.109564] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [287.110075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [287.110102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [287.110114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [287.110226] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [287.110596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [287.110608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [287.110618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [287.110732] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [287.111454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [287.111467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [287.111331] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [287.111478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [287.111818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [287.112349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [287.112364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [287.112375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [287.112798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [287.112810] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.112829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [287.112838] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [287.112846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [287.112854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [287.112896] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [287.113149] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.113188] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.113315] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.113344] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.113428] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.114497] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.114637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [287.114652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [287.115155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected <7> [287.115171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [287.115183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [287.115352] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [287.115658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [287.115670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [287.115680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [287.115886] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [287.116188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [287.116199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [287.116209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [287.116395] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [287.117894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [287.117909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [287.117922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [287.118373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [287.118385] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [287.118395] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no <7> [287.118404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [287.118413] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [287.118422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [287.118430] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [287.118491] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.118512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [287.118982] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [287.119008] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [287.119134] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.119016] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [287.119522] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [287.120041] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [287.120515] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [287.121117] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [287.121592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [287.123898] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [287.124365] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [287.125959] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [287.126560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [287.127744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [287.128842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [287.129352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [287.129825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.130795] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [287.131251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [287.131632] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [287.132025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [287.132404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [287.132775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [287.136968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [287.137391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [287.137782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [287.138855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [287.139402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [287.139785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [287.140185] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [287.140573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [287.143091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [287.143501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [287.143910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [287.144297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [287.144677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [287.145131] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [287.145914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [287.146313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [287.146706] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [287.147236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [287.147622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [287.148038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [287.148426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [287.148815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [287.149216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [287.149597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [287.150045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [287.150435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [287.150805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [287.151187] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [287.151553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [287.151925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [287.152293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [287.152663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [287.153056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [287.153428] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [287.153796] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [287.154183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [287.154561] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [287.154947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [287.155298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [287.155543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [287.155786] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [287.156135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [287.156508] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [287.156895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [287.157253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [287.157619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [287.158012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [287.158388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [287.158761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [287.159160] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [287.159533] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [287.159918] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [287.160290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [287.160664] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [287.161053] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [287.161430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [287.161806] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [287.161811] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [287.161815] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [287.180898] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [287.182503] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [287.183330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.185320] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.188005] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.222823] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.223151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.223829] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.227219] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.227650] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.228070] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.228473] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.228880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.229527] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [287.263937] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [287.276432] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [287.282819] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [288.331300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.389276] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off <7> [289.391814] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.392139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.392618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.393311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.394054] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.394186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.394497] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [289.394788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.394804] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.396323] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [289.401949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.518330] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.543167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.551861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.553495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.554300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [289.554690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [289.554805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.555123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [289.555672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.556330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.556474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [289.556948] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.570068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.570453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.570755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.571075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.571802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.684707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.685048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.685668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.687073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.687753] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.694663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.695143] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.695414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.695667] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.696938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.697374] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.697663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.698027] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.698407] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.700234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.701462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.701769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.702133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.702979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.778941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.779330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.780657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.781509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.782280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.782832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.783394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.783944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.784520] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [289.816357] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [289.837760] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [289.850702] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [289.857804] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [289.873948] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [289.879775] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [289.918376] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.918706] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.929084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [290.430740] [IGT] Reloading i915 as normal <5> [291.374619] Setting dangerous option force_probe - tainting kernel <6> [291.389451] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [291.391535] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [291.392074] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [291.392522] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [291.392980] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [291.393487] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [291.394150] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [291.394455] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [291.395695] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [291.396012] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [291.396297] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [291.396562] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [291.396573] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [291.397359] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [291.397404] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [291.397738] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [291.398065] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a <7> [291.398345] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [291.399287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [291.399679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [291.400079] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [291.400406] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [291.400716] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [291.410096] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [291.410413] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [291.410700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [291.411015] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [291.411475] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.411958] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.412414] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [291.412869] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [291.413331] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [291.413785] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [291.414264] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [291.414713] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [291.415186] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [291.415639] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [291.416122] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [291.416575] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [291.417740] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [291.418099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [291.418409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [291.418716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [291.419041] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [291.419415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [291.419749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [291.420189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [291.420646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [291.421113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [291.421561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [291.422012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [291.422383] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [291.422680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [291.423021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [291.423472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.423927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [291.424373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [291.424803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.425144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [291.425490] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.425948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [291.426382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [291.426814] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [291.427277] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [291.427659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.428085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [291.428526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [291.428987] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.429413] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [291.429835] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [291.430200] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [291.430597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [291.431637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [291.432087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [291.432519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [291.432953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [291.433298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [291.433606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [291.434049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [291.435315] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [291.437557] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [291.438024] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [291.438503] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [291.438479] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [291.438967] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [291.439174] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [291.439548] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [291.439836] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [291.439843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [291.440203] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [291.440520] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [291.440826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [291.441138] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [291.441444] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [291.441732] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [291.442049] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [291.442352] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [291.442638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [291.442989] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [291.443323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [291.443631] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [291.443941] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [291.444251] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [291.444540] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [291.450207] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [291.454359] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [291.454874] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT) <7> [291.455578] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A] <7> [291.462943] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [291.463352] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [291.463650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [291.464104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [291.464565] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [291.465021] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [291.465456] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [291.465883] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [291.466322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [291.466671] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [291.467140] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0 <7> [291.467613] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.468748] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.469198] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.469495] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.469893] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.470377] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.471092] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [291.471538] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [291.472004] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [291.481981] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [291.482369] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [291.482672] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [291.691129] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [291.692086] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [291.695662] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [291.704205] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [291.720255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [291.720300] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [291.720328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [291.720673] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [291.722037] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [291.723560] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static <7> [291.725321] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control <7> [291.726753] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [291.728814] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [291.730220] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [291.731723] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [291.733165] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [291.734401] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [291.735864] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [291.738472] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT) <7> [291.739886] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B] <7> [291.745211] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.747277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B] <7> [291.749124] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [291.754900] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT) <7> [291.757047] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C] <7> [291.761646] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [291.763688] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C] <7> [291.765499] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [291.769882] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [291.771815] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [291.773058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled <7> [291.775829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled <7> [291.778689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled <7> [291.780794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [291.782967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [291.785160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A <7> [291.787295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B <7> [291.789428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B <7> [291.791547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B <7> [291.793661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C <7> [291.795766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C <7> [291.797864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C <7> [291.799393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A <7> [291.800748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A <7> [291.801993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A <7> [291.803228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B <7> [291.804348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C <7> [291.805705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A <7> [291.806996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A <7> [291.807965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B <7> [291.808839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C <7> [291.809844] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [291.810835] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [291.812050] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [291.813038] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [291.814325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled <7> [291.815071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled <7> [291.815750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled <7> [291.817011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled <7> [291.817554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled <7> [291.818036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [291.818588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [291.819097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz <7> [291.819632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz <7> [291.820129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz <7> [291.820652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz <7> [291.821178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz <7> [291.821687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz <7> [291.822175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz <7> [291.822827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz <7> [291.823413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz <7> [291.824088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz <7> [291.824761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.825445] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.825995] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [291.826840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state] <7> [291.827256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state] <7> [291.827698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state] <7> [291.828097] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [291.828579] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [291.828909] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [291.829347] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [291.829911] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [291.833676] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [291.834111] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [291.834472] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [291.868688] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [291.869037] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [291.869296] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [291.869554] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [291.869816] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8 <7> [291.870407] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108 <7> [291.870868] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208 <7> [291.871483] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308 <7> [291.872051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8 <7> [291.873031] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8 <7> [291.873489] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108 <7> [291.875302] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208 <7> [291.875786] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308 <7> [291.877146] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8 <7> [291.877550] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8 <7> [291.877854] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108 <7> [291.878408] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208 <7> [291.878883] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308 <7> [291.879384] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8 <7> [291.880412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset] <7> [291.880895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset] <7> [291.881548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset] <7> [291.882534] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [291.883660] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B] <7> [291.884527] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C] <7> [291.885915] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [291.895449] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs <7> [291.897188] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered <7> [291.897734] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [291.903469] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [291.909831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event <7> [291.911300] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs <7> [291.912974] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [291.920717] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event <7> [291.920901] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs <7> [291.924020] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event <7> [291.924177] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs <7> [291.933476] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [291.940723] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event <7> [291.940885] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs <7> [291.945140] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event <6> [291.945283] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [291.954122] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [291.989051] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [292.000438] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39 <7> [292.003843] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [292.009307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.010722] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping <7> [292.011215] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping <7> [292.011653] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping <7> [292.012099] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [292.013774] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [292.014389] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [292.014862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.017864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.019271] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [292.019470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.020428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.021144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.021157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.021582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.025860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.025875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.026621] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [292.027638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.032208] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [292.032712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.033568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.034080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.034701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.035265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.035278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.035710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.039266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.039280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.039758] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [292.042111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [292.042131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [292.042873] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.043353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.043777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.045141] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [292.047950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.047966] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [292.047977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [292.048026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [292.048549] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.050266] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.051959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected <7> [292.052200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [292.052212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.052224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.052237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.052248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.052920] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [292.056847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.056868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.056881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.058057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.058517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.059666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.060198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.060211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.060637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.064097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.064113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.064611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.064627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.064639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.069227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.069248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.069260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.070032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.070482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.071132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.072311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.072325] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.072757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.077039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.077053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.078529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.078545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [292.078555] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [292.078564] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [292.078572] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [292.078580] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [292.078643] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [292.078679] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [292.078688] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [292.078721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [292.078857] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [292.078908] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [292.086968] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb <6> [292.088449] fbcon: i915drmfb (fb0) is primary device <6> [292.090442] Console: switching to colour frame buffer device 200x56 <6> [292.090461] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [292.090476] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [292.091001] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [292.091441] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [292.091888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [292.092359] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [292.094305] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [292.094324] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [292.095327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [292.095352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [292.097726] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [292.098249] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [292.098694] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [292.099196] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [292.100733] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.101218] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.101651] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.103078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.103095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [292.103114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [292.103188] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [292.103507] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [292.103968] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.104042] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [292.104398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.104514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [292.105087] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [292.105954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [292.105978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.105991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.106005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.106017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.107698] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [292.108251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [292.108727] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [292.109221] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [292.109694] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [292.110653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.110674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.110687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.110720] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [292.111421] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [292.111811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.112084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [292.112276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.112564] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [292.115058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.115612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.115625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.116072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.116518] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [292.117035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [292.119048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [292.119576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [292.120094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [292.120576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [292.121694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [292.122427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [292.122849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [292.123295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [292.123725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [292.124972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [292.125346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [292.125682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [292.126057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [292.126518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.126394] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [292.126531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.126793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [292.127271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.127287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.127299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.127578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [292.127982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [292.128361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [292.128735] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [292.129270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [292.129757] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [292.130377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [292.130754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [292.131262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [292.131625] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [292.131881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.131899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.131911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.132193] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [292.132598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [292.132710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.133206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.133248] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [292.133680] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [292.133891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.134477] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [292.134856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [292.136036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.136047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.136345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [292.136476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.137069] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [292.137391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [292.137790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [292.138399] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [292.138819] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [292.139331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [292.139764] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [292.140197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [292.140601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [292.141071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [292.142152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.142167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.142634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.142648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [292.142659] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [292.142667] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [292.142675] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [292.142683] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [292.143915] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [292.143982] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [292.143994] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [292.144082] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [292.143923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [292.144391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [292.144808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [292.145253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [292.145600] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [292.145656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [292.147052] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [292.147497] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [292.148069] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [292.148257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [292.148663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [292.149215] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [292.149642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [292.150133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [292.150565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [292.150637] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [292.151155] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [292.151614] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [292.152058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [292.152514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [292.152984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [292.153144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [292.153443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [292.153550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [292.153904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [292.153970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [292.154369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [292.154774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [292.155082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [292.155205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [292.155548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [292.156032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.156411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [292.156477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [292.156812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [292.157014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.157463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.157596] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [292.157949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.158058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [292.158399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.158453] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [292.158848] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [292.158851] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [292.158854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [292.158870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.159482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.162329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.162775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.163185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [292.163582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.163996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.164409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [292.164818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.165250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.165649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.166092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.166495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.166913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.167348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.167751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.168225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [292.168624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.169182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [292.169593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [292.172308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [292.172759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [292.173181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state <7> [292.173577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [292.173988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [292.174394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [292.174797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [292.175232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [292.175620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [292.176039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [292.176440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [292.176850] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [292.177358] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [292.177771] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [292.178173] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [292.178560] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [292.178967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [292.179352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [292.179752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [292.180178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [292.180638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [292.181118] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [292.181519] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [292.181915] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [292.182341] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [292.182742] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [292.183180] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [292.183592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [292.184682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [292.185108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [292.185507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [292.185903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [292.186334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [292.186734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [292.187341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [292.187747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [292.188164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [292.188563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [292.188977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [292.189387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [292.189788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [292.192405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [292.192810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [292.193257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [292.193652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [292.194090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [292.194500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [292.194894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [292.195328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [292.195721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [292.196133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [292.196535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [292.196913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.197371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <6> [292.197962] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [292.197774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.198694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.199133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.199531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [292.199957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [292.200354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [292.200749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [292.201175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [292.201584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [292.202022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [292.202421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [292.202824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [292.203264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [292.203661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [292.204115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.204517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.204921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.205352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [292.205754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [292.206182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [292.206578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [292.207019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [292.207425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [292.208601] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [292.210084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [292.210504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [292.210897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [292.211328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [292.211723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [292.212154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [292.212554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [292.213732] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [292.214154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [292.215689] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [292.216175] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [292.216958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [292.217477] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [292.217906] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [292.229971] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.230419] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [292.230851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [292.439165] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.440445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.442510] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.449456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [292.450694] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [292.453308] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [292.454456] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.455583] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [292.460298] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [292.461870] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [292.463330] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [292.469170] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.470289] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.471262] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.475416] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [292.476882] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [292.480608] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [292.483828] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [292.485262] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [292.488438] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [292.501519] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 288 us, max time under evasion is 250 us <7> [292.516683] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [292.525271] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [292.526590] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [292.529594] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [292.540024] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [292.539776] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [292.540174] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [292.540195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [292.540483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [292.540522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [292.541701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.549197] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [292.564823] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.566364] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.567850] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.574792] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.576614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.576664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [292.576702] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [292.576875] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [292.578191] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.579697] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.590769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [292.590819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.590863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.590912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.591052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.596076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.596108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.596139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.597866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.602446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.603834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.604449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.604465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.604912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.608787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.608803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.609484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.609500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.609512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.614022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.614042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.614053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.614725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.615155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.615899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.616525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.616540] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.617088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.620889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.620903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.621352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.621370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes <7> [292.621379] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no <7> [292.621386] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no <7> [292.621393] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no <7> [292.621399] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no <7> [292.621448] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [292.621474] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800 <7> [292.621481] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [292.621860] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0) <7> [292.621868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [292.621882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [292.622160] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [292.622498] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.622811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.623165] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.623553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.623567] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [292.623579] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [292.623630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [292.624139] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.624623] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.626478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [292.626493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.626506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.626680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.626693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.631573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.631705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.631716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.632787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.633245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.636117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.636613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.636624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.638054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.641906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.641920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.642446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.642724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.642746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.647343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.647438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.647451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.648023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.648407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.649159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.649593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.649604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.650105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.653498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.653415] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.653512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.654015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.653886] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.655277] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [292.655743] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.656253] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.656682] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [292.657172] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.657595] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.658205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [292.660964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.660982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.665499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.668793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.668810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.669499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.669896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.671242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.671582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.671592] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.671859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.675123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.675137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.675587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.676410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.676423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.681027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.682029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.682045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.682774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.683195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.683783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.684231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.684241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.684635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.688036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.688049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.688488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.689027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] <7> [292.689040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1] <7> [292.689501] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [292.689900] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [292.690369] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [292.690829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [292.690842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor <7> [292.690852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0 <7> [292.690899] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no <7> [292.691328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [292.691730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [292.692925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes: <7> [292.692969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.692980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.693029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] <7> [292.693039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [292.698036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected <7> [292.698096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] <7> [292.698108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [292.698844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <6> [292.699262] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [292.699572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.700203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.701426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.701438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.701832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.705929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.706044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.706491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected <7> [292.706542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] <7> [292.706553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [292.711010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected <7> [292.711065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] <7> [292.711077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [292.711782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.713990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.714529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.715892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.715902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.716212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [292.718971] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [292.721694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.721707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.722352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected <7> [292.723100] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <6> [292.738587] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [293.774915] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A] <7> [293.775316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.775649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.775940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.776245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.776587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.776878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.777195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.777526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.777812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.778140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.778497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.778775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.779067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.779372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.779647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.779921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.780238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.780550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.780825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.781121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.781434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.781707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.781997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.782292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.782567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.782842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.783173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.783593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.784048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.784503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.784929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.785381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.785819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.786280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.786730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.787183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.787620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.788067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.788503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.788941] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [293.789386] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [293.789877] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.790359] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.790781] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.791217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.791662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.792099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.792528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.792975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.793445] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.793937] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [293.794446] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.794894] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.795354] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.795791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [293.796260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [293.796694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [293.797151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [293.797843] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.800188] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.926549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [294.002359] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [294.005616] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [294.020281] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [294.021255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [294.022228] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [294.027150] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [294.029867] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [294.080231] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [294.081336] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [294.081910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.082345] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [294.086545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [294.091444] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [294.091604] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [294.093207] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [294.093590] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [294.095194] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [294.100850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [294.102137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [294.103154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [294.104589] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [294.106053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [294.107486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [294.109001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [294.110355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [294.111351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [294.112760] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [294.115487] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [294.118784] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B] <7> [294.119814] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C] <7> [294.218416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [294.220352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [294.221870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [294.223830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [294.226580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [294.246563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [294.343260] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [294.344594] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [294.346253] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [294.348125] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [294.349685] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A] <7> [294.351318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [294.353080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [294.354944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [294.356512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [294.358163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [294.359814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [294.361461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [294.363118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.364669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [294.366207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.367775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.369510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.371038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.372569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.373792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.374996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.376326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.377489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [294.378822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.379874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [294.381269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [294.382273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [294.383481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [294.384553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [294.386155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [294.387628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [294.389065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [294.390250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [294.391488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [294.392487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [294.393704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [294.394755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [294.396210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [294.397380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [294.398552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [294.399584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [294.400778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [294.401777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [294.403001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [294.404154] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [294.405919] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [294.407453] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [294.409012] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [294.410524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [294.412044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [294.413512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [294.415009] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [294.416510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [294.418198] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [294.419891] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [294.421416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [294.422911] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [294.424416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [294.426044] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0 <7> [294.427566] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0 <7> [294.429085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset] <7> [294.430604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [294.432121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [294.433645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [294.435170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [294.436673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [294.438169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [294.439684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [294.441179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [294.442705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [294.444215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [294.445719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [294.447253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0 <7> [294.448772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [294.449986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [294.450999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [294.452019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [294.453039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [294.454060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [294.455053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [294.455990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [294.456995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [294.458011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [294.458807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [294.459568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [294.460322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.461094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [294.461830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.462587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [294.463355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [294.464123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0 <7> [294.464844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [294.465602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [294.466346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0 <7> [294.467105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [294.467731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [294.468333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [294.468914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [294.469517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [294.470113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [294.470688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [294.471297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.471882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.472490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [294.473093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [294.473673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [294.474286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [294.474868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [294.475476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [294.476078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [294.488060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [294.496932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [294.497568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [294.498701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [294.499686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [294.500397] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [294.501268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [294.501540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [294.501888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [294.502273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [294.502626] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [294.503002] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [294.503341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [294.503580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [294.503818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [294.504334] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A] <7> [294.504722] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [294.505766] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on <7> [294.508149] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (77 ms remaining) <7> [294.594218] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [294.625581] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.626725] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on <7> [294.627797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [294.677220] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [294.678450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [294.679464] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [294.680575] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [294.829874] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [294.831305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [294.832889] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.836309] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on <7> [294.838224] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [294.846591] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [294.847804] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [294.851511] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [294.853353] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [294.854826] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [294.858815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK <7> [294.860463] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [294.862087] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [294.869250] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [294.870551] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [294.871583] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [294.876162] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [294.877778] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [294.879295] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [294.883196] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [294.884777] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [294.887424] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [294.890326] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [294.892044] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [294.895448] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37 <7> [294.907278] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 331 us, max time under evasion is 250 us <7> [294.922836] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [294.930196] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [294.931713] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [294.936028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1] <7> [294.938323] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [294.944089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1] <7> [294.945437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.946815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [294.948490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [294.951431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.951472] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.952927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [294.959076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [294.959118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [294.960867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2] <7> [294.961687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [294.967250] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [294.971135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2] <7> [294.973087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.974520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [294.976138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [294.977702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.977740] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [294.979179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [294.984912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [294.984949] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [294.984886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [295.135285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [295.136799] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [295.144664] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.145021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.145287] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [295.145531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.145774] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.146614] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [295.146902] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.147342] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.147655] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [295.148476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [295.224839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [295.225582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [295.225893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [295.226225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [295.229293] Console: switching to colour dummy device 80x25 <7> [295.230311] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed <7> [295.230453] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [295.230937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [295.232053] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [295.232561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [295.233087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [295.233569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [295.236532] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [295.256323] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [295.256822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [295.258286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [295.258839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [295.259392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [295.259747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [295.260111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [295.260454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [295.260870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [295.261246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [295.261658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [295.262205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [295.262707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [295.263266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [295.263786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [295.264319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [295.264840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [295.265296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [295.265702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [295.266167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [295.266690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [295.267227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [295.267748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [295.268284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [295.268743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [295.269200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [295.269543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [295.270010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [295.270533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [295.271070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [295.271593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [295.272147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [295.272564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [295.272942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [295.273486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [295.274038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [295.274613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [295.275168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [295.275687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [295.276120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [295.276531] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset <7> [295.276920] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0 <7> [295.277373] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [295.277814] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [295.278254] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [295.278650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [295.279007] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [295.279405] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [295.279755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset] <7> [295.280205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [295.280595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [295.280935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no <7> [295.281863] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [295.490432] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0 <7> [295.494033] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [295.508433] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off <7> [295.508932] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [295.509748] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time <7> [295.510489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short <7> [295.511487] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [295.562245] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [295.563488] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long <7> [295.564639] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [295.565890] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [295.570271] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [295.570804] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A] <7> [295.572012] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A] <7> [295.574605] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [295.576447] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [295.581501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A] <7> [295.582805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B] <7> [295.584448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A] <7> [295.586151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B] <7> [295.587794] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C] <7> [295.589404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C] <7> [295.590733] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A] <7> [295.592113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B] <7> [295.593300] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C] <7> [295.594724] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1] <7> [295.597301] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A] <7> [295.671118] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [295.722937] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs <7> [295.761699] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs <7> [295.778562] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs <7> [295.793892] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs <7> [295.805289] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs <7> [295.832138] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (236 ms remaining) <7> [296.074139] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [296.134910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [296.649887] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [296.651144] [IGT] i915_pm_rpm: exiting, ret=0

<6> [281.126470] Console: switching to colour dummy device 80x25

<7> [281.131415] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.132271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [281.132284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [281.133331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.133631] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.134176] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.134606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.134619] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [281.134628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [281.134674] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [281.135792] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.136199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.138400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [281.138414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.138426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.138564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [281.138575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [281.143329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [281.143457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [281.143468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [281.144502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.145474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.146129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.146626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.146637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.147038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.150334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.150346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.150824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [281.150952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [281.150977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [281.155526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [281.155651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [281.155662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [281.156381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.156796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.157365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.157765] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.157775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.158167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.161436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.161446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.161911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [281.171607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [281.171622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [281.176333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [281.177338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [281.177350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [281.178070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.178410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.179027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.179466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.179476] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.179882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.183139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.183149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.183588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [281.184576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [281.184589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [281.189137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [281.190076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [281.190088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [281.190795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.191178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.191733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.192162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.192172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.192575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.195853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.195863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.196310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [281.196960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [281.196972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [281.197440] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [281.197854] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [281.198243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [281.198683] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.198695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [281.198704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [281.198745] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [281.199146] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [281.199551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [281.200558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [281.200570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.200581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.200625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [281.200636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [281.205118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [281.205155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [281.205164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [281.205698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.205987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [281.206486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [281.206795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.206805] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.207100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [281.210197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [281.210205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [281.210486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [281.210518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [281.210525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [281.214887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [281.214917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [281.214924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [281.215437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.215669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [281.216127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [281.216438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.216445] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [281.216676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [281.219701] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [281.219709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [281.220019] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [281.220741] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:145]

<7> [281.355452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.264181] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [282.264483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [282.264826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [282.265154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [282.265435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [282.265708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [282.266006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [282.266324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [282.266598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.266901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [282.267231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.267506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.267801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.268125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.268399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.268672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.268991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.269302] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.269579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.269873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.270185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.270462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [282.270737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.271030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.271343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.271619] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.271915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.272257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.272535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.272835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.273245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.273606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.273917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [282.274255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [282.274606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [282.274916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [282.275247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [282.275529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [282.275840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [282.276176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [282.276455] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [282.276731] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [282.277085] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [282.277414] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [282.277681] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [282.277977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [282.278335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.278604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.278909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.279194] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.279494] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [282.279825] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [282.280143] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [282.280418] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [282.280690] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [282.281128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [282.281548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [282.281976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [282.282393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [282.283059] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [282.285064] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [282.490190] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [282.493545] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [282.511223] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [282.511774] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [282.513074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [282.513163] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [282.514148] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [282.565946] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [282.565906] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [282.567046] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [282.567594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.568057] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [282.571319] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [282.571712] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [282.572867] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [282.573773] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [282.575366] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [282.578273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [282.579441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [282.580577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [282.581841] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [282.582902] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [282.583951] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [282.584970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [282.585991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [282.586994] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [282.588063] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [282.589954] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [282.592970] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [282.594119] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [282.698542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [282.700474] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.701666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.703603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.706155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [282.727573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [282.808646] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [282.810006] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [282.811564] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [282.812839] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [282.814241] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [282.815225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [282.816390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [282.817385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [282.818682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [282.820471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [282.821610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [282.823112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [282.824633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [282.826325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [282.827844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [282.829065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [282.830360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [282.831899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [282.833435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [282.834906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [282.836451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [282.837725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [282.838758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [282.840234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [282.841746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [282.843247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [282.844752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [282.846194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [282.847605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [282.849078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [282.850594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [282.852087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [282.853565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [282.854907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [282.855930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [282.857410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [282.858910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [282.860410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [282.861928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [282.863135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [282.864245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [282.865768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [282.867276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [282.868822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [282.870318] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [282.872037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [282.873192] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [282.874225] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [282.875422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [282.876381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [282.877506] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [282.878520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [282.879691] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.880978] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [282.882305] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [282.883343] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [282.884395] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [282.885391] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [282.886428] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [282.887420] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [282.888524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [282.889600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [282.891107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [282.892617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [282.894118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [282.895623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [282.897130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [282.898698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [282.900231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [282.901779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [282.903300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [282.904320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [282.905331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [282.906340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [282.907352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [282.908352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [282.909363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [282.910366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [282.911356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [282.912355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [282.913109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [282.913866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [282.914596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [282.915354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [282.916096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [282.916862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [282.917583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [282.918350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [282.919099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [282.919868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [282.920609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [282.921358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [282.921957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [282.922543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [282.923148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [282.923733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [282.924337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [282.924940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [282.925526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [282.926131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [282.926713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [282.927316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [282.927923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [282.928495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [282.929097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [282.929680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [282.930302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [282.930807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [282.931298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [282.931806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [282.943860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [282.952827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [282.953426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.955091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [282.955780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.956632] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [282.957566] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [282.957947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [282.958247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [282.958488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [282.958725] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [282.959032] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [282.959389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [282.959743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [282.960119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [282.960707] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [282.961432] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [282.962004] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [282.962510] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (105 ms remaining)

<7> [283.074233] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [283.164112] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.165265] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [283.166384] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [283.215200] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [283.216302] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [283.217309] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [283.218423] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [283.376731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.378734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [283.392280] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.398681] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [283.400040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [283.409074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [283.410613] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [283.415416] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [283.417267] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [283.418982] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [283.423295] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [283.424774] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [283.426257] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [283.430692] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [283.432216] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [283.433748] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [283.438097] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [283.439532] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [283.441047] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [283.447075] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [283.448594] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [283.451250] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [283.454539] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [283.455978] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [283.459243] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [283.487115] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [283.494657] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [283.496193] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [283.500203] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [283.500208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<6> [283.506232] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [283.506089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [283.508222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.509609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [283.511449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [283.513263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.513302] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.515019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [283.521397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [283.521440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [283.523650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [283.530172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [283.532142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.533564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [283.535152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [283.536652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.536689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [283.538119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [283.543774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [283.543896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [283.650265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.651157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.663980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.690430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.690883] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.703970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.781509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.785216] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [283.792752] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.793238] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.793638] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [283.794099] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.794709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.795318] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [283.795937] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.796524] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.797147] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [283.799780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.884296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.885398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [283.886705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [283.887516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [283.890547] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [283.890745] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [283.891860] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [283.892592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [283.893619] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [283.897114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [283.898954] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [283.906005] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [283.920683] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [283.922569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [283.923757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [283.924510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [283.925190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [283.925883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [283.926575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [283.927325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [283.928067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [283.928771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [283.929488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [283.930227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [283.930972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [283.931483] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [283.932211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [283.932957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [283.933679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [283.934434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [283.935166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [283.935855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [283.936457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [283.937027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [283.937528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [283.938099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [283.938593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [283.939089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [283.939581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [283.940095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [283.940589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [283.941111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [283.941604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [283.942095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [283.942611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [283.943121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [283.943618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [283.944124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [283.944615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [283.945114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [283.945609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [283.946121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [283.946620] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [283.947123] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [283.947761] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [283.948344] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [283.948929] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [283.949647] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [283.950374] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [283.951124] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [283.951862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [283.952432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [283.952946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [283.953477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [283.954713] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [284.162198] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [284.165523] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [284.174220] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [284.174760] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [284.175762] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [284.176266] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [284.177385] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [284.228468] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.228583] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [284.229839] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [284.231676] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [284.232261] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [284.232777] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [284.237393] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [284.238142] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [284.240043] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.245270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [284.246582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [284.247784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [284.249009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [284.250239] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [284.251605] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [284.252970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [284.254402] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [284.256078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [284.257672] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [284.260499] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [284.338784] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [284.392225] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [284.421251] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [284.429633] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [284.443209] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [284.450500] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [284.474165] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (256 ms remaining)

<7> [284.738412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [284.769005] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [286.472318] Setting dangerous option force_probe - tainting kernel

<6> [286.486980] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [286.489293] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [286.489750] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [286.490067] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [286.490480] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [286.491001] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [286.491641] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [286.492042] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [286.493316] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [286.493599] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [286.493872] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [286.494174] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [286.494185] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [286.494997] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [286.495042] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [286.495360] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [286.495642] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a

<7> [286.495935] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [286.496609] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [286.497005] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [286.497297] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [286.497662] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [286.497982] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [286.505909] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [286.506244] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [286.506530] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [286.506815] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [286.507152] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.507611] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.508081] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [286.508544] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.509010] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.509464] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [286.509929] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [286.510387] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [286.510841] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [286.511303] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [286.511754] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [286.512217] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [286.513918] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [286.514412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [286.514900] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [286.515401] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [286.515910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [286.516412] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [286.516892] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [286.517357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [286.517821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [286.518310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [286.518773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [286.519251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [286.519704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [286.520176] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [286.520624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [286.521098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.521559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.522040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [286.522489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.522946] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [286.523402] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.523861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [286.524319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.524771] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [286.525241] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [286.525723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.526305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.526812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [286.527293] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.527751] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [286.528214] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [286.528668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.529262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.529722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.530195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.530675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.531250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.531716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.532199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.532666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.534684] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [286.537078] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [286.537585] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [286.538086] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [286.539166] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [286.540094] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [286.540677] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [286.541808] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [286.542759] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [286.542879] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [286.543354] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [286.543824] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [286.544252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [286.544706] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [286.545188] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [286.545648] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [286.546135] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [286.546598] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [286.547077] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [286.547543] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [286.548012] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [286.548470] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [286.548934] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [286.549392] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [286.549846] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [286.556318] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [286.560472] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.561003] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [286.561482] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [286.572906] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [286.573256] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [286.573562] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [286.573914] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [286.574383] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [286.574833] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [286.575301] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [286.575739] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [286.576201] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [286.576664] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [286.577279] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [286.577782] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.578234] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.578677] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.579142] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.579567] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.580052] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.580785] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.581270] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.581762] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [286.592488] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.593240] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [286.593590] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.802998] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.804113] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.806043] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.810679] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.832703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.832754] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [286.832788] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [286.836117] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.837618] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.839173] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [286.842774] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [286.844585] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.847049] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.848692] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.850162] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.851825] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.853272] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.856668] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.859609] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.861280] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [286.868034] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.869981] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [286.871487] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.874785] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.876457] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [286.880178] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.882241] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [286.883695] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.887429] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [286.888968] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [286.890049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [286.892435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [286.895201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [286.897135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [286.899022] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [286.900785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [286.902540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [286.904224] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [286.905682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [286.906688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [286.907760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [286.908991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [286.910149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.911155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.912070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [286.913026] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [286.913951] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [286.914751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.915444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [286.916219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [286.916836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [286.917698] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.918743] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.919778] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.920808] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.921769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [286.922785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [286.923789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [286.924650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [286.925419] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [286.925987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [286.926480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [286.927006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [286.927515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [286.928059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [286.928555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [286.929076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [286.929577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [286.930107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [286.930754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [286.931325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [286.931831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [286.932370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.932767] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.933181] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.933840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [286.934279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [286.934880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [286.935481] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.936204] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.936737] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.937309] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.937928] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.943143] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.943704] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.944239] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.973723] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.974043] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.974309] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.974565] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.974825] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [286.975146] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [286.975591] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [286.976055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [286.976511] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [286.976987] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [286.977447] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [286.977913] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [286.978365] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [286.978817] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [286.979297] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [286.979748] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [286.980216] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [286.980672] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [286.981283] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [286.982122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [286.982603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [286.983101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [286.984585] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [286.985460] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [286.986195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [286.986956] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.993809] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [286.995933] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [286.996319] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [286.997256] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [287.000749] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [287.000952] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [287.002601] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [287.008900] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [287.009072] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [287.010575] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [287.010728] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [287.013036] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [287.015951] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [287.016117] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [287.017962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [287.018115] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [287.024666] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [287.062044] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [287.073024] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input35

<7> [287.077465] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [287.083886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [287.084393] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.085603] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [287.086106] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [287.086543] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [287.087665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [287.088140] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.088600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [287.089060] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.089504] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [287.089972] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [287.090721] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.091776] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.092748] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [287.093266] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.097667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [287.097686] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [287.098212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to disconnected

<7> [287.098234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [287.098244] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:111:eDP-1] EDID changed, epoch counter 2

<7> [287.098275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [287.098286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [287.098718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [287.098731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [287.098742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [287.099229] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [287.099445] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [287.099460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [287.099471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [287.099953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [287.099966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [287.099977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [287.100409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [287.100422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.100431] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [287.100440] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [287.100447] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [287.100455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [287.100463] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [287.100523] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.100540] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.100634] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.100645] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.104663] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [287.105243] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [287.105709] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [287.106184] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [287.107620] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [287.108155] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.108121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [287.108947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [287.108973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [287.109564] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [287.110075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [287.110102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [287.110114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [287.110226] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [287.110596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [287.110608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [287.110618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [287.110732] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [287.111454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [287.111467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [287.111331] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [287.111478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [287.111818] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [287.112349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [287.112364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [287.112375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [287.112798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [287.112810] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.112829] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [287.112838] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [287.112846] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [287.112854] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [287.112896] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [287.113149] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.113188] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.113315] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.113344] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.113428] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.114497] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.114637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [287.114652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [287.115155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] disconnected

<7> [287.115171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [287.115183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [287.115352] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [287.115658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [287.115670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [287.115680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [287.115886] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [287.116188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [287.116199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [287.116209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [287.116395] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [287.117894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [287.117909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [287.117922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [287.118373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [287.118385] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [287.118395] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? no

<7> [287.118404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [287.118413] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [287.118422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [287.118430] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [287.118491] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.118512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [287.118982] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [287.119008] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [287.119134] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.119016] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [287.119522] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [287.120041] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [287.120515] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [287.121117] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [287.121592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [287.123898] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [287.124365] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [287.125959] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [287.126560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [287.127744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [287.128842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [287.129352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [287.129825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.130795] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [287.131251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [287.131632] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [287.132025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [287.132404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [287.132775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [287.136968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [287.137391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [287.137782] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [287.138855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [287.139402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [287.139785] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [287.140185] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [287.140573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [287.143091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [287.143501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [287.143910] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [287.144297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [287.144677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [287.145131] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [287.145914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [287.146313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [287.146706] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [287.147236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [287.147622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [287.148038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [287.148426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [287.148815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [287.149216] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [287.149597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [287.150045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [287.150435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [287.150805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [287.151187] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [287.151553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [287.151925] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [287.152293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [287.152663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [287.153056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [287.153428] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [287.153796] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [287.154183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [287.154561] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [287.154947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [287.155298] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [287.155543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [287.155786] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [287.156135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [287.156508] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [287.156895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [287.157253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [287.157619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [287.158012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [287.158388] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [287.158761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [287.159160] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [287.159533] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [287.159918] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [287.160290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [287.160664] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [287.161053] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [287.161430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [287.161806] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [287.161811] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [287.161815] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [287.180898] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [287.182503] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [287.183330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.185320] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.188005] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.222823] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.223151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.223829] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.227219] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.227650] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.228070] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.228473] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.228880] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.229527] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [287.263937] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [287.276432] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [287.282819] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [288.331300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.389276] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD off

<7> [289.391814] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.392139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.392618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.393311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.394054] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.394186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.394497] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [289.394788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.394804] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.396323] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [289.401949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.518330] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.543167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.551861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.553495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.554300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [289.554690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [289.554805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.555123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [289.555672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.556330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.556474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [289.556948] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.570068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.570453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.570755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.571075] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.571802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.684707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.685048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.685668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.687073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.687753] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.694663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.695143] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.695414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.695667] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.696938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.697374] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.697663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.698027] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.698407] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.700234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.701462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.701769] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.702133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.702979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.778941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.779330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.780657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.781509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.782280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.782832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.783394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.783944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.784520] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [289.816357] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [289.837760] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [289.850702] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [289.857804] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [289.873948] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [289.879775] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [289.918376] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.918706] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.929084] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [291.374619] Setting dangerous option force_probe - tainting kernel

<6> [291.389451] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [291.391535] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [291.392074] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [291.392522] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [291.392980] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [291.393487] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [291.394150] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [291.394455] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [291.395695] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [291.396012] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [291.396297] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [291.396562] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [291.396573] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [291.397359] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [291.397404] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [291.397738] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [291.398065] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7713 MiB [mem 0x00000000-0x1e2176fff], io: n/a

<7> [291.398345] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [291.399287] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [291.399679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [291.400079] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [291.400406] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [291.400716] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [291.410096] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [291.410413] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [291.410700] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [291.411015] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [291.411475] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.411958] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.412414] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [291.412869] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [291.413331] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [291.413785] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [291.414264] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [291.414713] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [291.415186] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [291.415639] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [291.416122] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [291.416575] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [291.417740] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [291.418099] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [291.418409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [291.418716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [291.419041] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [291.419415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [291.419749] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [291.420189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [291.420646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [291.421113] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [291.421561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [291.422012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [291.422383] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [291.422680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [291.423021] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [291.423472] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.423927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [291.424373] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [291.424803] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.425144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [291.425490] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.425948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [291.426382] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [291.426814] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [291.427277] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [291.427659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.428085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [291.428526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [291.428987] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.429413] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [291.429835] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [291.430200] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [291.430597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [291.431637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [291.432087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [291.432519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [291.432953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [291.433298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [291.433606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [291.434049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [291.435315] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [291.437557] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [291.438024] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [291.438503] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [291.438479] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [291.438967] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [291.439174] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [291.439548] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [291.439836] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [291.439843] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [291.440203] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [291.440520] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [291.440826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [291.441138] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [291.441444] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [291.441732] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [291.442049] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [291.442352] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [291.442638] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [291.442989] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [291.443323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [291.443631] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [291.443941] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [291.444251] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [291.444540] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [291.450207] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [291.454359] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [291.454874] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:110:DDI A/PHY A] Using AUX CH A (VBT)

<7> [291.455578] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:110:DDI A/PHY A]

<7> [291.462943] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [291.463352] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [291.463650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [291.464104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [291.464565] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [291.465021] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [291.465456] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [291.465883] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [291.466322] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [291.466671] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [291.467140] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:110:DDI A/PHY A] initial power sequencer: PPS 0

<7> [291.467613] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.468748] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.469198] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.469495] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.469893] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.470377] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.471092] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [291.471538] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [291.472004] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [291.481981] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [291.482369] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [291.482672] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [291.691129] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [291.692086] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [291.695662] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [291.704205] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [291.720255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [291.720300] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [291.720328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [291.720673] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [291.722037] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:111:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [291.723560] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:111:eDP-1] DRRS type: static

<7> [291.725321] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:111:eDP-1] Using native PCH PWM for backlight control

<7> [291.726753] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:111:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [291.728814] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [291.730220] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [291.731723] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [291.733165] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [291.734401] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [291.735864] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [291.738472] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI B/PHY B] Using AUX CH B (VBT)

<7> [291.739886] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI B/PHY B]

<7> [291.745211] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.747277] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:118:DDI B/PHY B]

<7> [291.749124] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:118:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [291.754900] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI C/PHY C] Using AUX CH C (VBT)

<7> [291.757047] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI C/PHY C]

<7> [291.761646] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [291.763688] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI C/PHY C]

<7> [291.765499] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [291.769882] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [291.771815] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [291.773058] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] hw state readout: disabled

<7> [291.775829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] hw state readout: disabled

<7> [291.778689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] hw state readout: disabled

<7> [291.780794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [291.782967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [291.785160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] hw state readout: disabled, pipe A

<7> [291.787295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] hw state readout: disabled, pipe B

<7> [291.789428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] hw state readout: disabled, pipe B

<7> [291.791547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] hw state readout: disabled, pipe B

<7> [291.793661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] hw state readout: disabled, pipe C

<7> [291.795766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] hw state readout: disabled, pipe C

<7> [291.797864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] hw state readout: disabled, pipe C

<7> [291.799393] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [291.800748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [291.801993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST A] hw state readout: disabled, pipe A

<7> [291.803228] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST B] hw state readout: disabled, pipe B

<7> [291.804348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:122:DP-MST C] hw state readout: disabled, pipe C

<7> [291.805705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [291.806996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A

<7> [291.807965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B

<7> [291.808839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:137:DP-MST C] hw state readout: disabled, pipe C

<7> [291.809844] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [291.810835] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [291.812050] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [291.813038] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [291.814325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:111:eDP-1] hw state readout: disabled

<7> [291.815071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-1] hw state readout: disabled

<7> [291.815750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:128:HDMI-A-1] hw state readout: disabled

<7> [291.817011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-2] hw state readout: disabled

<7> [291.817554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:140:HDMI-A-2] hw state readout: disabled

<7> [291.818036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [291.818588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [291.819097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:cursor A] min_cdclk 0 kHz

<7> [291.819632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:59:pipe A] min_cdclk 0 kHz

<7> [291.820129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 1B] min_cdclk 0 kHz

<7> [291.820652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:69:plane 2B] min_cdclk 0 kHz

<7> [291.821178] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:78:cursor B] min_cdclk 0 kHz

<7> [291.821687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:84:pipe B] min_cdclk 0 kHz

<7> [291.822175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:85:plane 1C] min_cdclk 0 kHz

<7> [291.822827] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 2C] min_cdclk 0 kHz

<7> [291.823413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:103:cursor C] min_cdclk 0 kHz

<7> [291.824088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:109:pipe C] min_cdclk 0 kHz

<7> [291.824761] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:59:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.825445] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:84:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.825995] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:109:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [291.826840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [setup_hw_state]

<7> [291.827256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [setup_hw_state]

<7> [291.827698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [setup_hw_state]

<7> [291.828097] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [291.828579] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [291.828909] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [291.829347] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [291.829911] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [291.833676] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [291.834111] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [291.834472] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [291.868688] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [291.869037] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [291.869296] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [291.869554] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [291.869816] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 0: start 0x8

<7> [291.870407] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 1: start 0x108

<7> [291.870868] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 2: start 0x208

<7> [291.871483] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 3: start 0x308

<7> [291.872051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:59:pipe A] FQ 4: start 0x3c8

<7> [291.873031] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 0: start 0x8

<7> [291.873489] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 1: start 0x108

<7> [291.875302] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 2: start 0x208

<7> [291.875786] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 3: start 0x308

<7> [291.877146] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:84:pipe B] FQ 4: start 0x3c8

<7> [291.877550] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 0: start 0x8

<7> [291.877854] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 1: start 0x108

<7> [291.878408] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 2: start 0x208

<7> [291.878883] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 3: start 0x308

<7> [291.879384] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:109:pipe C] FQ 4: start 0x3c8

<7> [291.880412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [fastset]

<7> [291.880895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:84:pipe B] enable: no [fastset]

<7> [291.881548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe C] enable: no [fastset]

<7> [291.882534] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [291.883660] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:84:pipe B]

<7> [291.884527] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe C]

<7> [291.885915] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [291.895449] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:111:eDP-1] adding connector to sysfs

<7> [291.897188] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:111:eDP-1] backlight device intel_backlight registered

<7> [291.897734] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:111:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [291.903469] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [291.909831] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:111:eDP-1] generating connector hotplug event

<7> [291.911300] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:119:DP-1] adding connector to sysfs

<7> [291.912974] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [291.920717] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-1] generating connector hotplug event

<7> [291.920901] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:128:HDMI-A-1] adding connector to sysfs

<7> [291.924020] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:128:HDMI-A-1] generating connector hotplug event

<7> [291.924177] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:134:DP-2] adding connector to sysfs

<7> [291.933476] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [291.940723] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-2] generating connector hotplug event

<7> [291.940885] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:140:HDMI-A-2] adding connector to sysfs

<7> [291.945140] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:140:HDMI-A-2] generating connector hotplug event

<6> [291.945283] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [291.954122] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [291.989051] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [292.000438] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input39

<7> [292.003843] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [292.009307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.010722] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:59:pipe A] not active, skipping

<7> [292.011215] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:84:pipe B] not active, skipping

<7> [292.011653] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:109:pipe C] not active, skipping

<7> [292.012099] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [292.013774] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [292.014389] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:119:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [292.014862] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.017864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.019271] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [292.019470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.020428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.021144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.021157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.021582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.025860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.025875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.026621] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:128:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [292.027638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.032208] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:134:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [292.032712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.033568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.034080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.034701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.035265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.035278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.035710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.039266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.039280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.039758] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:140:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [292.042111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [292.042131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [292.042873] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.043353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.043777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.045141] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [292.047950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.047966] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [292.047977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [292.048026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [292.048549] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.050266] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.051959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] status updated from unknown to connected

<7> [292.052200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [292.052212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.052224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.052237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.052248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.052920] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [292.056847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.056868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.056881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.058057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.058517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.059666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.060198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.060211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.060637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.064097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.064113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.064611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.064627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.064639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.069227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.069248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.069260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.070032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.070482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.071132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.072311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.072325] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.072757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.077039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.077053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.078529] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.078545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [292.078555] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [292.078564] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [292.078572] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [292.078580] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [292.078643] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [292.078679] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [292.078688] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [292.078721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [292.078857] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [292.078908] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [292.086968] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb

<6> [292.088449] fbcon: i915drmfb (fb0) is primary device

<6> [292.090442] Console: switching to colour frame buffer device 200x56

<6> [292.090461] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [292.090476] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [292.091001] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [292.091441] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [292.091888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [292.092359] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [292.094305] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [292.094324] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [292.095327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [292.095352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [292.097726] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [292.098249] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [292.098694] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [292.099196] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [292.100733] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.101218] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.101651] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.103078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.103095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [292.103114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [292.103188] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [292.103507] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [292.103968] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.104042] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [292.104398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.104514] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [292.105087] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [292.105954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [292.105978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.105991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.106005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.106017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.107698] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [292.108251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [292.108727] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [292.109221] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [292.109694] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [292.110653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.110674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.110687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.110720] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [292.111421] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [292.111811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.112084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [292.112276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.112564] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [292.115058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.115612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.115625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.116072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.116518] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [292.117035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [292.119048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [292.119576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [292.120094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [292.120576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [292.121694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [292.122427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [292.122849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [292.123295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [292.123725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [292.124972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [292.125346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [292.125682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [292.126057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [292.126518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.126394] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [292.126531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.126793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [292.127271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.127287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.127299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.127578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [292.127982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [292.128361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [292.128735] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [292.129270] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [292.129757] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [292.130377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [292.130754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [292.131262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [292.131625] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [292.131881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.131899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.131911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.132193] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [292.132598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [292.132710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.133206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.133248] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [292.133680] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [292.133891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.134477] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [292.134856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [292.136036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.136047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.136345] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [292.136476] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.137069] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [292.137391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [292.137790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [292.138399] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [292.138819] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [292.139331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [292.139764] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [292.140197] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [292.140601] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [292.141071] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [292.142152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.142167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.142634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.142648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [292.142659] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [292.142667] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [292.142675] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [292.142683] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [292.143915] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [292.143982] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [292.143994] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [292.144082] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [292.143923] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [292.144391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [292.144808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [292.145253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [292.145600] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [292.145656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [292.147052] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [292.147497] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [292.148069] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [292.148257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [292.148663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [292.149215] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [292.149642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [292.150133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [292.150565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [292.150637] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [292.151155] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [292.151614] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [292.152058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [292.152514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [292.152984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [292.153144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [292.153443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [292.153550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [292.153904] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [292.153970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [292.154369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [292.154774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [292.155082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [292.155205] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [292.155548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [292.156032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.156411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [292.156477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [292.156812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [292.157014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.157463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.157596] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [292.157949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.158058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [292.158399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.158453] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [292.158848] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [292.158851] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [292.158854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [292.158870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.159482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.162329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.162775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.163185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.163582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.163996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.164409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [292.164818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.165250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.165649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.166092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.166495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.166913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.167348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.167751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.168225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.168624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.169182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [292.169593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [292.172308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [292.172759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [292.173181] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dpll_hw_state

<7> [292.173577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [292.173988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [292.174394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [292.174797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [292.175232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [292.175620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [292.176039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [292.176440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [292.176850] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [292.177358] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [292.177771] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [292.178173] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [292.178560] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [292.178967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [292.179352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [292.179752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [292.180178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [292.180638] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [292.181118] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [292.181519] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [292.181915] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [292.182341] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [292.182742] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [292.183180] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [292.183592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [292.184682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [292.185108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [292.185507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [292.185903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [292.186334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [292.186734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [292.187341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [292.187747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [292.188164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [292.188563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [292.188977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [292.189387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [292.189788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [292.192405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [292.192810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [292.193257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [292.193652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [292.194090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [292.194500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [292.194894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [292.195328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [292.195721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [292.196133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [292.196535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [292.196913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.197371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<6> [292.197962] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [292.197774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.198694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.199133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.199531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [292.199957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [292.200354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [292.200749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [292.201175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [292.201584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [292.202022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [292.202421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [292.202824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [292.203264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [292.203661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [292.204115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.204517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.204921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.205352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [292.205754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [292.206182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [292.206578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [292.207019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [292.207425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [292.208601] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [292.210084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [292.210504] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [292.210897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [292.211328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [292.211723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [292.212154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [292.212554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [292.213732] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [292.214154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [292.215689] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [292.216175] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [292.216958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [292.217477] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [292.217906] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [292.229971] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.230419] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [292.230851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [292.439165] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.440445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.442510] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.449456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [292.450694] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [292.453308] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [292.454456] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.455583] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [292.460298] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [292.461870] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [292.463330] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [292.469170] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.470289] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.471262] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.475416] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [292.476882] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [292.480608] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [292.483828] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [292.485262] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [292.488438] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [292.501519] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 288 us, max time under evasion is 250 us

<7> [292.516683] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [292.525271] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [292.526590] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [292.529594] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [292.540024] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [292.539776] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [292.540174] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [292.540195] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [292.540483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [292.540522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [292.541701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.549197] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [292.564823] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.566364] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.567850] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.574792] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.576614] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.576664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [292.576702] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [292.576875] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [292.578191] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.579697] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.590769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [292.590819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.590863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.590912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.591052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.596076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.596108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.596139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.597866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.602446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.603834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.604449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.604465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.604912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.608787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.608803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.609484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.609500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.609512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.614022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.614042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.614053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.614725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.615155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.615899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.616525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.616540] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.617088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.620889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.620903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.621352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.621370] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] enabled? yes

<7> [292.621379] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:DP-1] enabled? no

<7> [292.621386] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-1] enabled? no

<7> [292.621393] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:134:DP-2] enabled? no

<7> [292.621399] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:140:HDMI-A-2] enabled? no

<7> [292.621448] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [292.621474] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:111:eDP-1] found preferred mode: 3200x1800

<7> [292.621481] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [292.621860] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:59:pipe A] desired mode 3200x1800 set (0,0)

<7> [292.621868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [292.621882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [292.622160] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [292.622498] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.622811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.623165] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.623553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.623567] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [292.623579] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [292.623630] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [292.624139] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.624623] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.626478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [292.626493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.626506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.626680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.626693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.631573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.631705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.631716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.632787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.633245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.636117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.636613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.636624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.638054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.641906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.641920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.642446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.642724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.642746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.647343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.647438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.647451] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.648023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.648407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.649159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.649593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.649604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.650105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.653498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.653415] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.653512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.654015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.653886] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.655277] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [292.655743] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.656253] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.656682] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [292.657172] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.657595] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.658205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [292.660964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.660982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.665499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.668793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.668810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.669499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.669896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.671242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.671582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.671592] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.671859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.675123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.675137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.675587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.676410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.676423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.681027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.682029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.682045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.682774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.683195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.683783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.684231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.684241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.684635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.688036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.688049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.688488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.689027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1]

<7> [292.689040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:111:eDP-1]

<7> [292.689501] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [292.689900] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [292.690369] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [292.690829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [292.690842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD monitor

<7> [292.690852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:111:eDP-1] ELD size 20, SAD count 0

<7> [292.690899] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] VRR capable: no

<7> [292.691328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [292.691730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:111:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [292.692925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:111:eDP-1] probed modes:

<7> [292.692969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.692980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.693029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1]

<7> [292.693039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [292.698036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:DP-1] disconnected

<7> [292.698096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1]

<7> [292.698108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [292.698844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<6> [292.699262] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [292.699572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.700203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.701426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.701438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.701832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.705929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.706044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.706491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-1] disconnected

<7> [292.706542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2]

<7> [292.706553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [292.711010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:134:DP-2] disconnected

<7> [292.711065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2]

<7> [292.711077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [292.711782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.713990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.714529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.715892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.715902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.716212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [292.718971] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [292.721694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.721707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.722352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:140:HDMI-A-2] disconnected

<7> [292.723100] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<6> [292.738587] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [293.774915] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:59:pipe A]

<7> [293.775316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.775649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.775940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.776245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.776587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.776878] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.777195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.777526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.777812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.778140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.778497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.778775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.779067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.779372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.779647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.779921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.780238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.780550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.780825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.781121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.781434] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.781707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.781997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.782292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.782567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.782842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.783173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.783593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.784048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.784503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.784929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.785381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.785819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.786280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.786730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.787183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.787620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.788067] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.788503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.788941] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [293.789386] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [293.789877] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.790359] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.790781] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.791217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.791662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.792099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.792528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.792975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.793445] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.793937] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [293.794446] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.794894] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.795354] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.795791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [293.796260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [293.796694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [293.797151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [293.797843] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.800188] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.926549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [294.002359] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [294.005616] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [294.020281] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [294.021255] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [294.022228] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [294.027150] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [294.029867] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [294.080231] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [294.081336] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [294.081910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.082345] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [294.086545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [294.091444] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [294.091604] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [294.093207] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [294.093590] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [294.095194] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [294.100850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [294.102137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [294.103154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [294.104589] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [294.106053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [294.107486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [294.109001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [294.110355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [294.111351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [294.112760] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [294.115487] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [294.118784] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:84:pipe B]

<7> [294.119814] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe C]

<7> [294.218416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [294.220352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [294.221870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [294.223830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [294.226580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [294.246563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [294.343260] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:111:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [294.344594] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:110:DDI A/PHY A][CRTC:59:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [294.346253] i915 0000:00:02.0: [drm:intel_dp_compute_output_format [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [294.348125] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [294.349685] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:110:DDI A/PHY A] [CRTC:59:pipe A]

<7> [294.351318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [294.353080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [294.354944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [294.356512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [294.358163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [294.359814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [294.361461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [294.363118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.364669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [294.366207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.367775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.369510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.371038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.372569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.373792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.374996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.376326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.377489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.378822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.379874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [294.381269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [294.382273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [294.383481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [294.384553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [294.386155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [294.387628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [294.389065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [294.390250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [294.391488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [294.392487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [294.393704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [294.394755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [294.396210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [294.397380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [294.398552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [294.399584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [294.400778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [294.401777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [294.403001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [294.404154] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [294.405919] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [294.407453] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [294.409012] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [294.410524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [294.412044] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [294.413512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [294.415009] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [294.416510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [294.418198] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [294.419891] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [294.421416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [294.422911] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [294.424416] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [294.426044] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:59:pipe A] allocated DPLL 0

<7> [294.427566] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:59:pipe A] reserving DPLL 0

<7> [294.429085] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: yes [modeset]

<7> [294.430604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [294.432121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [294.433645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [294.435170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [294.436673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [294.438169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [294.439684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [294.441179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [294.442705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [294.444215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [294.445719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [294.447253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0

<7> [294.448772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [294.449986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [294.450999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [294.452019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [294.453039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [294.454060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [294.455053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [294.455990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [294.456995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [294.458011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [294.458807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [294.459568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [294.460322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.461094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [294.461830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.462587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [294.463355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [294.464123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 373250, min cdclk 373250, min voltage level 0

<7> [294.464844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [294.465602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [294.466346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 3200x1800+0+0

<7> [294.467105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [294.467731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [294.468333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [294.468914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [294.469517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [294.470113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [294.470688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [294.471297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.471882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.472490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [294.473093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [294.473673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:112] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [294.474286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [294.474868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [294.475476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [294.476078] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [294.488060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [294.496932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [294.497568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [294.498701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [294.499686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [294.500397] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [294.501268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [294.501540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [294.501888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [294.502273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [294.502626] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [294.503002] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [294.503341] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [294.503580] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [294.503818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [294.504334] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:59:pipe A]

<7> [294.504722] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [294.505766] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power on

<7> [294.508149] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (77 ms remaining)

<7> [294.594218] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [294.625581] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.626725] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power on

<7> [294.627797] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [294.677220] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [294.678450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [294.679464] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [294.680575] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [294.829874] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [294.831305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [294.832889] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.836309] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turning VDD on

<7> [294.838224] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [294.846591] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [294.847804] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [294.851511] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [294.853353] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [294.854826] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [294.858815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Clock recovery OK

<7> [294.860463] i915 0000:00:02.0: [drm:intel_dp_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [294.862087] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [294.869250] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [294.870551] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [294.871583] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [294.876162] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [294.877778] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [294.879295] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [294.883196] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [294.884777] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:111:eDP-1][ENCODER:110:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [294.887424] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [294.890326] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [294.892044] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [294.895448] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 37

<7> [294.907278] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 331 us, max time under evasion is 250 us

<7> [294.922836] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [294.930196] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [294.931713] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [294.936028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-1]

<7> [294.938323] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [294.944089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-1]

<7> [294.945437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.946815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [294.948490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [294.951431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.951472] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.952927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [294.959076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [294.959118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [294.960867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-2]

<7> [294.961687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [294.967250] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [294.971135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:140:HDMI-A-2]

<7> [294.973087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.974520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [294.976138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [294.977702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.977740] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [294.979179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [294.984912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [294.984949] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [294.984886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [295.135285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [295.136799] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [295.144664] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.145021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.145287] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [295.145531] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.145774] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.146614] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [295.146902] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.147342] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.147655] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [295.148476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [295.224839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [295.225582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [295.225893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [295.226225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [295.229293] Console: switching to colour dummy device 80x25

<7> [295.230311] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:112] is removed

<7> [295.230453] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [295.230937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [295.232053] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [295.232561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [295.233087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [295.233569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb_uv 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [295.236532] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [295.256323] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [295.256822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [295.258286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [295.258839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [295.259392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [295.259747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [295.260111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [295.260454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [295.260870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [295.261246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [295.261658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [295.262205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [295.262707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [295.263266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [295.263786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [295.264319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [295.264840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [295.265296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [295.265702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [295.266167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [295.266690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [295.267227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [295.267748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [295.268284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [295.268743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [295.269200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [295.269543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [295.270010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [295.270533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [295.271070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [295.271593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [295.272147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [295.272564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [295.272942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [295.273486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [295.274038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [295.274613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [295.275168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [295.275687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [295.276120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:59:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [295.276531] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:59:pipe A] fastset requirement not met, forcing full modeset

<7> [295.276920] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:59:pipe A] releasing DPLL 0

<7> [295.277373] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:59:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [295.277814] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:53:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [295.278254] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:59:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [295.278650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [295.279007] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [295.279405] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [295.279755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:59:pipe A] enable: no [modeset]

<7> [295.280205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [295.280595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [295.280935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:cursor A] fb: [NOFB], visible: no

<7> [295.281863] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [295.490432] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:111:eDP-1] set backlight PWM = 0

<7> [295.494033] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [295.508433] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 turn panel power off

<7> [295.508932] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [295.509748] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [295.510489] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - short

<7> [295.511487] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [295.562245] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [295.563488] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:110:DDI A/PHY A] - long

<7> [295.564639] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [295.565890] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [295.570271] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [295.570804] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:59:pipe A]

<7> [295.572012] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:110:DDI A/PHY A]

<7> [295.574605] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [295.576447] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [295.581501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DDI A/PHY A]

<7> [295.582805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI B/PHY B]

<7> [295.584448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST A]

<7> [295.586151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST B]

<7> [295.587794] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:122:DP-MST C]

<7> [295.589404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DDI C/PHY C]

<7> [295.590733] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST A]

<7> [295.592113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST B]

<7> [295.593300] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:137:DP-MST C]

<7> [295.594724] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:111:eDP-1]

<7> [295.597301] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:59:pipe A]

<7> [295.671118] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [295.722937] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:111:eDP-1] removing connector from sysfs

<7> [295.761699] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:119:DP-1] removing connector from sysfs

<7> [295.778562] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:128:HDMI-A-1] removing connector from sysfs

<7> [295.793892] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:134:DP-2] removing connector from sysfs

<7> [295.805289] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:140:HDMI-A-2] removing connector from sysfs

<7> [295.832138] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 wait for panel power cycle (236 ms remaining)

<7> [296.074139] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:110:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [296.134910] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [296.649887] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [296.651144] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload