Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.4-g6b305d78c (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18479-g8fbb3d48e61c+ x86_64)
Out 
Using IGT_SRANDOM=1778626026 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Dmesg
<6> [264.656020] Console: switching to colour dummy device 80x25
<6> [264.657316] [IGT] kms_force_connector_basic: executing
<7> [264.846820] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [264.847663] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [264.848319] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [264.849246] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [264.849258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.849268] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.849557] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.849857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.850323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.850754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.851350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.851656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.851664] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.852028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.853325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.853333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.853598] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.853962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.854048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.854057] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.854329] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.854589] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.855064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.855325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.855747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.856037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.856044] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.856304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.857534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.857541] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.857883] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.858149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.858250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.858257] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.858524] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.858809] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.859265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.859521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.859962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.860221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.860228] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.860488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.861775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.861783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.862047] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.862308] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [264.863291] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [264.863904] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 2 or reprobing
<7> [264.863917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.863925] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from disconnected to connected
<7> [264.864095] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [264.864228] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [264.864133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.864463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.864928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.865244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.865261] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.865524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.866897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.866913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.867262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [264.867270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [264.867277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [264.867283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [264.867289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [264.867294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [264.867372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.867549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.867918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.868406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.868667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.868684] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.868986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.870336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.870353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.870739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [264.870750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [264.870761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [264.870771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [264.870781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [264.870790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [264.871201] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [264.871239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.871295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [264.871302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [264.871489] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [264.871504] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [264.871515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [264.871520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [264.871526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [264.871532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [264.871537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [264.871543] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [264.871548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [264.871786] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [264.871854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.871931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [264.871942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [264.871952] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 58
<7> [264.872185] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [264.872198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [264.872203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [264.872209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [264.872215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [264.872220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [264.872226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [264.872396] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [264.872437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.872617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.872979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.873456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.873743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.873765] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.874086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.875350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.875368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.875779] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [264.875803] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [264.875823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [264.875832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [264.875843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [264.875853] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [264.875863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [264.875874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [264.876286] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 2 to 0 or reprobing
<7> [264.876296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.876303] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.876593] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.876905] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.877388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.877647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.878113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.878378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.878385] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.878643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.880124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.880132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.880400] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.880832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from connected to disconnected
<7> [264.880850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.880861] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 60
<7> [264.880965] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [264.881092] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [264.881184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.881197] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.881625] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.882057] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.882626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.883073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.883642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.884079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.884091] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.884499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.886191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.886204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.886625] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.887061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [264.888572] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [264.890497] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [264.891667] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:73:LVDS-1] force updated from 0 to 0 or reprobing
<7> [264.891683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [264.891705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [264.891739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [264.891881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [264.891891] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [264.891962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [264.891976] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [264.891986] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [264.892107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [264.892116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [264.892414] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:73:LVDS-1] EDID override reset
<7> [264.892466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [264.892479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [264.892489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [264.892605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [264.892614] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [264.893108] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [264.893122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.893133] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.893584] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.894015] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.894629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.895223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.895803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.896215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.896226] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.896605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.898400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.898412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.898851] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.899283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.899390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.899402] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.899928] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.900321] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.900944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.901221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.901637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.901962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.901972] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.902257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.903483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.903490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.903794] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.904116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.904369] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [264.904406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [264.904413] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [264.904684] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [264.904977] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [264.905422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.905679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [264.906139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [264.906400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.906406] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.906666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [264.907940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [264.907947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [264.908203] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [264.908464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [264.908885] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:80:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [264.908895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [264.908903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [264.960762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [264.976763] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [264.976779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [264.977085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [264.992752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [264.992762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [264.993023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [264.993104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [264.993112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [265.044806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [265.060753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.060763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.061014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [265.076782] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.076793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [265.077059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [265.077319] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:80:HDMI-A-1] EDID override reset
<7> [265.077358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [265.077366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [265.129363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [265.145756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.145766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.146023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [265.161760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.161775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [265.162068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [265.162315] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:DP-1] EDID override reset
<7> [265.162351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [265.162358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [265.166640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [265.167211] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:93:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [265.167227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [265.167240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [265.167885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.168303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [265.168868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.169275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.169286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.169680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [265.171452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.171463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [265.171909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [265.172012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [265.172024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [265.172648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.172984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [265.173405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.173664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.173670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.173953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [265.175233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.175241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [265.175509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [265.175750] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:93:HDMI-A-2] EDID override reset
<7> [265.175805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [265.175818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [265.176274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.176530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [265.177008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.177269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.177275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.177528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [265.178794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.178802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [265.179065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [265.179368] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:97:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [265.179376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [265.179383] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [265.179834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.180098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [265.180514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.180843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.180854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.181133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [265.182400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.182408] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [265.182670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [265.182789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [265.182804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [265.183236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.183492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [265.183940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.184200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.184206] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.184458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [265.185741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.185749] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [265.186013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [265.186216] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:97:HDMI-A-3] EDID override reset
<7> [265.186249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [265.186256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [265.186690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.186999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [265.187449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.187706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.187741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.188016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [265.189253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.189260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [265.189521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [265.189755] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:101:DP-2] EDID override reset
<7> [265.189808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [265.189820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [265.194145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [265.194508] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:105:DP-3] EDID override reset
<7> [265.194563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [265.194575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [265.199121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<6> [265.201207] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [265.202068] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [265.210379] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [265.210405] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [265.210609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [265.210638] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [265.210655] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [265.210949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [265.210960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [265.210974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.210985] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.211679] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.212551] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.213328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.213588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.214037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.214298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.214305] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.214565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.215911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.215920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.216184] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.216447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.216459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [265.216466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [265.268316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [265.284752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.284764] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.285020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [265.300771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.300780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [265.301039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [265.301050] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [265.301058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [265.305343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [265.305363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [265.305374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [265.305974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.306364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [265.306969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [265.307248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.307256] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.307512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [265.308861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [265.308869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [265.309135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [265.309145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [265.309152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [265.309579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.309895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [265.310343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [265.310775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.310787] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.311219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [265.313027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [265.313043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [265.313468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [265.313484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [265.313495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [265.318017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [265.318035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [265.318046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [265.322515] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<7> [265.322533] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] enabled? yes
<7> [265.322544] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:77:VGA-1] enabled? no
<7> [265.322552] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:80:HDMI-A-1] enabled? no
<7> [265.322560] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:88:DP-1] enabled? no
<7> [265.322567] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:93:HDMI-A-2] enabled? no
<7> [265.322575] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:97:HDMI-A-3] enabled? no
<7> [265.322582] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:101:DP-2] enabled? no
<7> [265.322589] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:105:DP-3] enabled? no
<7> [265.322637] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [265.322671] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] found preferred mode: 1366x768
<7> [265.322680] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [265.322761] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:53:pipe A] desired mode 1366x768 set (0,0)
<7> [265.326792] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [265.344262] Console: switching to colour frame buffer device 170x48
Created at 2026-05-13 21:54:14