Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.4-gb04ca530e (x86_64) (Linux: 7.1.0-rc3-CI_DRM_18476-g9cb559e83f7f+ x86_64)
Out 
Using IGT_SRANDOM=1778607950 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Dmesg
<6> [265.551681] Console: switching to colour dummy device 80x25
<6> [265.552685] [IGT] kms_force_connector_basic: executing
<7> [265.757874] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [265.759852] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [265.760656] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [265.762606] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [265.762623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.762637] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.763132] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.763585] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.764204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.764605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.765202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.765602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.765613] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.766082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.767949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.767961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.768385] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.768795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.768899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.768918] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.769393] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.769820] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.770423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.770818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.771425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.771839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.771849] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.772294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.773961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.773973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.774371] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.774770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.775001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.775013] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.775449] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.775852] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.776458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.776887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.777497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.777906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.777916] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.778358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.780025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.780037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.780424] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.780817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [265.782271] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [265.783073] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 2 or reprobing
<7> [265.783091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.783111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from disconnected to connected
<7> [265.783313] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [265.783453] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [265.783369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.783783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.784428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.784860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.784884] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.785353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.787141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.787166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.787716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [265.787729] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [265.787741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [265.787752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [265.787763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [265.787774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [265.787875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.788107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.788528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.789136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.789550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.789573] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.790037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.791704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.791729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.792320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [265.792333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [265.792345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [265.792355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [265.792366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [265.792377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [265.792837] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [265.792892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.793010] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [265.793021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [265.793320] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [265.793342] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [265.793360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [265.793369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [265.793379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [265.793389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [265.793398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [265.793408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [265.793418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [265.793737] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:77:VGA-1] EDID override set
<7> [265.793799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.793851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD monitor IGT
<7> [265.793857] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:77:VGA-1] ELD size 24, SAD count 0
<7> [265.793863] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 56
<7> [265.794118] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [265.794142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [265.794150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [265.794161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [265.794171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [265.794180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [265.794190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [265.794367] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [265.794406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.794588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.794920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.795501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.795802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.795819] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.796127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.797537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.797552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.797911] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [265.797959] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [265.797980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] probed modes:
<7> [265.797990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [265.797998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [265.798004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [265.798013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [265.798022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [265.798381] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 2 to 0 or reprobing
<7> [265.798390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.798398] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.798703] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.799157] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.799634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.799957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.800454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.800723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.800730] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.801051] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.802412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.802420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.802698] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.803033] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] status updated from connected to disconnected
<7> [265.803048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.803056] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:77:VGA-1] EDID changed, epoch counter 58
<7> [265.803144] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [265.803282] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [265.803312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.803324] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.803635] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.803981] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.804581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.805034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.805626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.806075] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.806087] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.806510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.808201] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.808215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.808638] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.809083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<6> [265.810524] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [265.811481] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [265.812617] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:73:LVDS-1] force updated from 0 to 0 or reprobing
<7> [265.812634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [265.812654] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [265.812666] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [265.812806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [265.812817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [265.812882] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [265.812896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [265.812905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [265.813063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [265.813073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [265.813331] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:73:LVDS-1] EDID override reset
<7> [265.814062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [265.814079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [265.814085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [265.814172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [265.814178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [265.814460] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:77:VGA-1] force updated from 0 to 0 or reprobing
<7> [265.814468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.814475] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.814810] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.815166] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.815689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.816000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.816470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.816768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.816775] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.817287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.818617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.818625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.818961] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.819387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.819481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.819492] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.819995] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.820380] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.820824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.821125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.821616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.821914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.821921] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.822232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.823544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.823552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.823824] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.824171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.824446] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:77:VGA-1] EDID override reset
<7> [265.824483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [265.824490] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [265.824790] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [265.825129] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [265.825636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.825955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [265.826423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [265.826715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.826721] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.827049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [265.828347] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [265.828355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [265.828656] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [265.828984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [265.829336] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:80:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [265.829346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [265.829354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [265.881052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [265.897984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.897996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.898285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [265.913977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.913988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [265.914264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [265.914345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [265.914353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [265.966054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [265.981990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.982000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [265.982276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [265.997975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [265.997994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [265.998296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [265.998522] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:80:HDMI-A-1] EDID override reset
<7> [265.998556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [265.998563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [266.050478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [266.067014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.067034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.067501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [266.083982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.084003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [266.084362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [266.084667] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:DP-1] EDID override reset
<7> [266.084714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [266.084723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [266.089121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [266.089603] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:93:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [266.089618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [266.089631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [266.090284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.090636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [266.091237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.091657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.091669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.092136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [266.093897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.093912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [266.094407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [266.094525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [266.094538] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [266.095072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.095423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [266.096026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.096527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.096539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.097029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [266.098662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.098679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [266.099226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [266.099557] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:93:HDMI-A-2] EDID override reset
<7> [266.099614] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [266.099626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [266.100261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.100674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [266.101274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.101708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.101720] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.102179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [266.103818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.103832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [266.104266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [266.104749] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:97:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [266.104763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [266.104773] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [266.105443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.105764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [266.106287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.106599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.106607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.106900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [266.108550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.108561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [266.108887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [266.109005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [266.109020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [266.109510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.109859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [266.110514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.110837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.110845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.111271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [266.112746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.112759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [266.113221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [266.113515] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:97:HDMI-A-3] EDID override reset
<7> [266.113555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [266.113563] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [266.114062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.114438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [266.114959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.115364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.115374] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.115671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [266.117202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.117218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [266.117594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [266.117900] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:101:DP-2] EDID override reset
<7> [266.118011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [266.118025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [266.122510] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [266.122762] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:105:DP-3] EDID override reset
<7> [266.122798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [266.122809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [266.127353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<6> [266.129066] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [266.129753] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [266.141237] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [266.141267] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [266.141512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1]
<7> [266.141546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD monitor
<7> [266.141566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:73:LVDS-1] ELD size 20, SAD count 0
<7> [266.141799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:73:LVDS-1] probed modes:
<7> [266.141816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [266.141837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1]
<7> [266.141854] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:77:VGA-1] force=1
<7> [266.142719] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [266.143073] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [266.143759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [266.144116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [266.144545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [266.144815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [266.144823] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.145195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [266.146538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [266.146546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [266.146845] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [266.147154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:77:VGA-1] disconnected
<7> [266.147172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1]
<7> [266.147184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:80:HDMI-A-1]
<7> [266.198990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [266.214985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.215000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.215340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [266.230971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [266.230982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [266.231288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:80:HDMI-A-1] disconnected
<7> [266.231300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1]
<7> [266.231308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:88:DP-1]
<7> [266.235650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:88:DP-1] disconnected
<7> [266.235671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2]
<7> [266.235684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:93:HDMI-A-2]
<7> [266.236417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.236794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [266.237447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [266.237784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.237791] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.238170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [266.239534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [266.239543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [266.239818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:93:HDMI-A-2] disconnected
<7> [266.239827] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3]
<7> [266.239834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:97:HDMI-A-3]
<7> [266.240307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.240587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [266.241018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [266.241321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.241328] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [266.241601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [266.242953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [266.242962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [266.243258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:97:HDMI-A-3] disconnected
<7> [266.243267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2]
<7> [266.243274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:101:DP-2]
<7> [266.247613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:101:DP-2] disconnected
<7> [266.247633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3]
<7> [266.247645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:105:DP-3]
<7> [266.252224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:DP-3] disconnected
<7> [266.252241] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] enabled? yes
<7> [266.252252] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:77:VGA-1] enabled? no
<7> [266.252261] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:80:HDMI-A-1] enabled? no
<7> [266.252268] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:88:DP-1] enabled? no
<7> [266.252276] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:93:HDMI-A-2] enabled? no
<7> [266.252283] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:97:HDMI-A-3] enabled? no
<7> [266.252291] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:101:DP-2] enabled? no
<7> [266.252298] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:105:DP-3] enabled? no
<7> [266.252334] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [266.252368] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:73:LVDS-1] found preferred mode: 1366x768
<7> [266.252377] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [266.252415] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:53:pipe A] desired mode 1366x768 set (0,0)
<7> [266.257658] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [266.275285] Console: switching to colour frame buffer device 170x48
Created at 2026-05-13 12:49:22