igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	55.02 seconds
Hostname	shard-rkl-8
Igt-Version	IGT-Version: 2.4-g4568b2c14 (x86_64) (Linux: 7.1.0-rc1-CI_DRM_18374-g58d98cc42c58+ x86_64)
Out	Using IGT_SRANDOM=1777393854 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811c4997b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.571s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.443s) Subtest gem-execbuf-stress: SUCCESS (55.017s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.571s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.443s) Subtest gem-execbuf-stress: SUCCESS (55.017s)
Dmesg	<6> [142.865759] Console: switching to colour dummy device 80x25 <6> [142.865815] [IGT] i915_pm_rpm: executing <7> [142.868542] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [142.869075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [142.869087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [142.898753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.898762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.898765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [142.898768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [142.901114] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [142.903581] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [142.907423] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [142.907558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [142.908058] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [142.908065] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [142.908069] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [142.908075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [142.908080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [142.908083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [142.908087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [142.908090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [142.908093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [142.908096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [142.908099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [142.908103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [142.908106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [142.908109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [142.908112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [142.908116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [142.908119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [142.908122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [142.908125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [142.908129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.908132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.908135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.908138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [142.908141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [142.908145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [142.908148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [142.908151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [142.908154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [142.908157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [142.908160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [142.908163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [142.908167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.908170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.908173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.908176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [142.908232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [142.908236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [142.912436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [142.912476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [142.912480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [142.916673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [142.916706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [142.916709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [142.920923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [142.924682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [142.924688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [142.928885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [142.929140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [142.929144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [142.933350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [142.933591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [142.933595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [142.937811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [142.938276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [142.938282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [142.967885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.967893] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.967896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [142.967899] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [142.970248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [142.972714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [142.976557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [142.976685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [142.977157] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [142.977163] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [142.977168] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [142.977173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [142.977177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [142.977180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [142.977183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [142.977187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [142.977190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [142.977193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [142.977196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [142.977199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [142.977203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [142.977206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [142.977209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [142.977212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [142.977215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [142.977218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [142.977222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [142.977225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.977228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.977231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [142.977234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [142.977237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [142.977240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [142.977243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [142.977247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [142.977250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [142.977253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [142.977256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [142.977259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [142.977262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.977265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.977268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [142.977272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [142.977294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [142.977297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [142.981494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [142.981506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [142.981510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [142.985705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [142.985717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [142.985720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [142.989914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [142.990141] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:418] <7> [144.028031] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [144.028320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [144.028939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [144.029585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [144.030169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [144.030304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [144.030438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [144.030571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [144.030705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [144.030838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [144.031013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [144.031178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [144.031311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [144.031443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [144.031575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [144.031708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [144.031842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [144.031983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [144.032117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [144.032254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [144.032389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [144.032524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [144.032658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [144.032792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [144.032925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [144.033071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [144.033206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [144.033339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [144.033472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [144.033604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [144.033737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [144.033870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [144.034011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [144.034143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [144.034277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [144.034409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [144.034542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [144.034673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [144.034806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [144.034939] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [144.035108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [144.035240] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [144.035392] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [144.035523] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [144.035653] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [144.035782] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [144.035911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [144.036054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [144.036204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [144.036343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [144.036477] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [144.036624] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [144.036774] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [144.036909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [144.037057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [144.037191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [144.037324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [144.037458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [144.037591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [144.037723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [144.037901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.038062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.041489] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [144.062093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [144.062575] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output <7> [144.067844] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [144.068436] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [144.069836] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [144.070346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [144.070842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [144.071345] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [144.071692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [144.072055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [144.072407] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [144.072749] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [144.073269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.073725] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [144.074588] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [144.074815] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [144.177234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.177930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.178606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.180359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.181626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.189129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.190567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.191964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.192752] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.193328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.195321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [144.278112] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [144.278856] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [144.279410] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [144.294265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.295219] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.295833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.296519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.297910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.298648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.299410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.300089] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.300750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.302632] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.303255] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.304497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.306546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.307072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.317520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.317861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.319104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [144.362346] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.362379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.362385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [144.362390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [144.362873] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [144.365310] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [144.371749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [144.379482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [144.379614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [144.379794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [144.384421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [144.389270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [144.394255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [144.395308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.396699] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [144.396790] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [144.449271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [144.449513] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.449716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.451079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.451331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.455997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.457380] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.457827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.458127] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.458264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.458444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.510182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.510567] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.511238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.511867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.512594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.513300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.513976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.514633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.515295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.516966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.517535] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.518808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.521022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.521592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.533333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.533862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.534914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [144.536212] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [144.580353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.580364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.580368] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [144.580370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [144.584390] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [144.589645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [144.596117] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [144.596244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [144.596377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [144.601007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [144.605858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [144.649168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.649417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.657524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.659196] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.659972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.660751] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.661415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.662475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.760594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.761041] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.761649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.762318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.763010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.763689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.764443] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.765153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.765781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.766547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.766682] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.767040] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.767743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.767887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.774031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.774129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.774399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [144.775395] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [144.806860] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.806877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.806880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [144.806883] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [144.809275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [144.811677] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [144.815485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [144.815614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [144.815748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [144.822220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [144.827162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [144.897202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.897983] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.903856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.905364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.906101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.906888] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.907458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.908112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.002051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.002428] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.003087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.003720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.004435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.005207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.005909] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.006581] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.007303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.007890] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.008041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.008329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.009012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.009149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.016551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.016742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.017285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.017989] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.051577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.051587] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.051590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.051593] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.053889] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.056291] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.060107] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.060236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.060369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.066145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.071100] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.121123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.121826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.127783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.129194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.129433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.129717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.129865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.130038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.231679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.232158] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.232769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.233481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.234195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.234889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.235601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.236350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.236994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.237666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.238278] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.238982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.240060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.240195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.247573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.247711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.248101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.249040] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.282535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.282545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.282548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.282551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.284865] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.287375] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.291682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.291809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.292200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.297099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.301980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.361218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.361964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.367859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.369305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.370059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.370863] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.371434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.372096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.405005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.405381] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.406040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.406664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.407406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.408146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.408868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.409521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.410184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.410900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.411229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.411508] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.412195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.412330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.418471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.418571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.418838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.419013] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.453487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.453498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.453501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.453504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.455809] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.458245] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.462056] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.462186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.462322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.466845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.471723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.545223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.545971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.551897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.553523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.554315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.555261] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.555919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.556568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.650553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.651012] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.651623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.652299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.652994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.653671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.654450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.655160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.655804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.656492] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.657099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.657843] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.658599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.658735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.666143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.666284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.666655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.667507] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.712138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.712149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.712152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.712155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.716177] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.721440] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.727914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.728042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.728177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.732777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.737667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.785133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.785572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.792590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.793967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.794230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.794522] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.794669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.794891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.892967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.893344] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.894002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.894626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.895363] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.896132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.896836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.897488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.898149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.898810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.898945] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.899229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.899930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.900078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.906223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.906324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.906593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.907694] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.941295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.941306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.941309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.941312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.943673] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.946137] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.951042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.951170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.951305] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.955887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.960754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.057112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.057504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.064472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.066146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.066996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.067859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.068470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.069263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.167686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.168170] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.168808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.169434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.170132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.170893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.171584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.172276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.172923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.173607] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.173748] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.174007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.174684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.174829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.180968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.181067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.181361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [146.181945] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [146.211546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.211558] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.211561] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.211564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.213908] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.216345] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.220129] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.220282] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.220418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.225262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.230146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.289207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.289958] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.295882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.297499] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.298364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.299280] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.299931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.300688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.395748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.396149] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.396793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.397504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.398267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.399115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.399821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.400580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.401336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.402225] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.402678] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.402979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.403662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.403811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.412441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.412598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.413001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [146.413829] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [146.446388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.446398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.446401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.446403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.448711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.452166] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.457116] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.457242] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.457374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.461918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.466780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.520983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.521683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.527675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.529107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.529365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.529649] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.529800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.529974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.627382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.627835] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.628442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.629113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.629817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.630498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.631190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.631863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.632496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.633208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.633813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.634544] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.636765] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.637331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.646456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.646761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.647415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [146.648241] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [146.681859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.681870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.681873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.681876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.684168] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.686579] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.690376] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.690505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.690640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.695557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.700452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.753025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.753668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.759639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.761146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.761886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.762642] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.763257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.763847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [146.850115] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [146.851031] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [146.851440] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [146.865834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.866156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.866773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.867430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.868164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.868805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.869288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.869791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.870293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.870828] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.871246] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.871997] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.873233] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.873519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.882329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.882606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.883163] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [146.886320] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [146.915070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.915080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.915083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.915086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.917379] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.919783] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.923592] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.923743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.923883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.928861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.933675] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.938670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.939718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.941169] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [146.941372] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [147.000950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [147.001188] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.001415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.003224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.004082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.008827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.010163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.010427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.010734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.010883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.011085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.054850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.055229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.055895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.056816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.057790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.058846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.059804] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.060777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.061706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.062706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [147.063512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.064592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.067203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.068020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.078543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.078860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.079671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [147.080501] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [147.113819] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [147.113830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [147.113833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [147.113849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [147.116163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [147.118561] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [147.122365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [147.122494] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [147.122629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [147.127724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [147.132597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [147.193205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.193962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.199823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.201261] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.202017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.202821] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.203392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.204051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [152.326855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [152.327298] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [152.327906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [152.328577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.329273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.329966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.330709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.331444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.332128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.332533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [152.332666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.332923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.333612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.333751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.341130] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [152.341259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.341525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [152.342477] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [152.374577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [152.374587] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [152.374590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [152.374593] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [152.376907] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [152.379335] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [152.383139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [152.383273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [152.383405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [152.387906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [152.392791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [152.448636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [152.449377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [152.455272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [152.456718] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [152.457473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [152.458267] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [152.458836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [152.459499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [154.561784] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [154.578316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.579051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.579895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.581010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.582027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.583115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.584149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.585233] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.586202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.588308] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [154.589170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.590788] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.592833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.593311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.605751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.605890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.640039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.640546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.640550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.640554] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.644329] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.646781] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.650618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.650766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.650907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [154.655319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [154.661337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [154.666722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [154.702639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.702647] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.702650] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [154.702653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [154.704972] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [154.707419] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [154.711241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [154.711367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [154.711500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [154.715716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [154.720569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [154.725458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.725751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.729101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.730418] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.730654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.730939] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.731092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.731265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.555811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.556191] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [157.556830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [157.557456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.558160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.558849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.559507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.560189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.560837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [157.561526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [157.561660] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [157.562048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [157.562724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.562873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.570272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.570467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.570977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [157.571911] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [157.604218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [157.604228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [157.604231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [157.604234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [157.606534] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [157.608938] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [157.612739] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [157.612866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [157.613001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [157.617831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [157.622704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [157.679985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.680686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.686642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.688145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [157.688880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [157.689633] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [157.690258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [157.690898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [162.785360] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [162.785857] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [162.786502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [162.787137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [162.787883] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [162.788579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [162.789239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [162.789945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [162.790597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [162.790960] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [162.791095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [162.791342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [162.792047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [162.792184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [162.798363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [162.798507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [162.798772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [162.799678] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [162.831757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [162.831768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [162.831771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [162.831774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [162.834082] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [162.836501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [162.840298] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [162.840441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [162.840577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [162.845132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [162.850004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [162.903495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [162.904185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [162.910162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [162.911519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [162.911771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [162.912091] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [162.912239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [162.912429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [164.799506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [164.811363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [164.811750] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [164.812387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [164.813017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [164.813739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.814494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.815209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.815919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.816620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [164.817533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [164.817669] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [164.818014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [164.818723] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [164.818868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [164.825018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [164.825108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [164.861104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [164.861114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [164.861117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [164.861120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [164.863418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [164.865827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [164.869630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [164.869757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [164.869891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [164.874874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [164.879736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [164.884631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [164.921918] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [164.921925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [164.921928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [164.921931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [164.924749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [164.927197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [164.931041] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [164.931163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [164.931302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [164.936505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [164.941401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [164.946268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [164.946452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [164.949919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [164.951265] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [164.951548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [164.951830] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [164.951985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [164.952159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [168.013108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [168.013486] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [168.014121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [168.014750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.015455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.016156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.016817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.017505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.018156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [168.018812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [168.018947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [168.019262] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [168.019946] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.020091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.027492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [168.027657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.028097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [168.028874] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [168.061233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [168.061243] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [168.061246] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [168.061249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [168.063554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [168.065949] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [168.069794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [168.069923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [168.070099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [168.074934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [168.079798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [168.135334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.136090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [168.143353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.144800] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [168.145138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [168.145463] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [168.145602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [168.145777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [173.242534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [173.242991] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [173.243596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [173.244272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [173.244955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.245630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.246337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.247016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.247646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [173.248222] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [173.248358] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [173.248607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [173.249292] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.249427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.255613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [173.255710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.256035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [173.257199] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [173.288149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [173.288160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [173.288163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [173.288165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [173.290464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [173.292873] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [173.296674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [173.296810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [173.296944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [173.301179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [173.306056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [173.391067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.391836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [173.397973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.399308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [173.399582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [173.399890] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [173.400092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [173.400331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [175.038904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [175.051746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [175.052128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [175.052762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [175.053388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [175.054105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.054863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.055565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.056284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.057006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [175.057570] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [175.057715] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [175.057970] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [175.058664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.058800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.063816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [175.063904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.096879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [175.096889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [175.096892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [175.096895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [175.099607] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [175.102020] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [175.105822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [175.105954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [175.106089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [175.110978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [175.115844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [175.120735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [175.155311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [175.155318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [175.155321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [175.155324] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [175.157665] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [175.160113] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [175.163919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [175.164043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [175.164174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [175.169226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [175.174088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [175.178965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.179139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [175.182618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [175.183959] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [175.184245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [175.184537] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [175.184702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [175.184885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [178.510665] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [178.511042] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [178.511706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [178.512334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [178.513077] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.513781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.514433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.515131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.515783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [178.516345] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [178.516483] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [178.516745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [178.517415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [178.517592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [178.523763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [178.523868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [178.524142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [178.525203] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [178.559596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [178.559606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [178.559610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [178.559613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [178.561924] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [178.564328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [178.568131] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [178.568263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [178.568397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [178.573120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [178.577995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [178.630783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [178.631524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [178.638591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [178.639955] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [178.640210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [178.640517] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [178.640666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [178.640867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.738422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.738811] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [183.739463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [183.740092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [183.740807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [183.741505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [183.742161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [183.742884] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [183.743543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [183.744232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [183.744388] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [183.744638] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [183.745340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.745474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.752871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.752969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.753257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [183.754375] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [183.786214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [183.786229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [183.786233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [183.786235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [183.789693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [183.792141] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [183.795977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [183.796105] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [183.796257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [183.800842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [183.805713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [183.862577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.862773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.868420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.869872] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [183.870622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [183.871402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [183.871965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [183.872634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.278438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [185.290363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.290774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [185.291444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [185.292077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [185.292834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.293612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.294336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.295046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.295776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [185.296032] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [185.296176] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [185.296443] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [185.297135] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.297289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.303423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.303516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.339349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.339380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.339383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [185.339386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [185.341672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [185.344123] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [185.347926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [185.348052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [185.348203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [185.352851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [185.357735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [185.362632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [185.397410] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.397417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.397420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [185.397423] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [185.399933] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [185.402944] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [185.406746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [185.406872] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [185.407004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [185.412140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [185.416999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [185.421869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.422034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.425534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.426869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [185.427112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [185.427470] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [185.427618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [185.427802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.910110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.910490] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [188.911147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [188.911770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [188.912482] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.913172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.913832] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.914518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [188.915161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [188.915817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [188.915952] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [188.916249] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [188.916930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.917077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.923235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.923352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.923622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [188.924818] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [188.956772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [188.956783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [188.956786] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [188.956789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [188.959097] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [188.961524] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [188.965320] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [188.965448] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [188.965583] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [188.970095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [188.974949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [189.030327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.030549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.036242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.037580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [189.037817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [189.038109] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [189.038248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [189.038422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [194.078996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [194.079379] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [194.080032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [194.080676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [194.081424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [194.082128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [194.082486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [194.082680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [194.082876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [194.083129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [194.083264] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [194.083515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [194.084207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [194.084343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [194.091737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [194.091866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [194.092153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [194.093115] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [194.125127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [194.125138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [194.125141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [194.125144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [194.127454] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [194.129906] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [194.133757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [194.133900] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [194.134039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [194.138490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [194.143361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [194.198215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [194.198766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [194.204773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [194.206259] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [194.206991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [194.207741] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [194.208387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [194.209036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [195.517914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [195.529878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [195.530292] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [195.530955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [195.531890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [195.532925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [195.534013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [195.535002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [195.535724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [195.536017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [195.536304] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [195.536499] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [195.536852] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [195.537631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [195.537817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [195.545235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [195.545325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [195.580318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [195.580328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [195.580331] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [195.580334] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [195.582638] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [195.585078] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [195.588896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [195.589023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [195.589158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [195.593377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [195.598243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [195.603126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [195.638992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [195.638999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [195.639002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [195.639005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [195.641394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [195.643857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [195.647689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [195.647872] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [195.648004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [195.652371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [195.657237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [195.662094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [195.662263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [195.665738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [195.667101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [195.667364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [195.667659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [195.667822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [195.668022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [199.294587] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [199.295498] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [199.299679] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [199.299870] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [199.300012] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [199.300170] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A] <7> [199.300313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [199.300467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [199.300614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [199.300751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [199.300885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [199.301019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [199.301153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [199.301286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [199.301419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [199.301552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [199.301708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [199.301857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [199.301989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [199.302121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [199.302253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [199.302385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [199.302517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [199.302662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [199.302793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [199.302925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [199.303056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [199.303188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [199.303321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [199.303453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [199.303585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [199.303729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [199.303861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [199.303992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [199.304125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [199.304257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [199.304390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [199.304523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [199.304702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [199.304836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [199.304969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [199.305102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [199.305235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [199.305368] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [199.305526] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [199.305668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [199.305802] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [199.305933] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [199.306063] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [199.306193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [199.306323] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [199.306457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [199.306611] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [199.306749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [199.306885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [199.307032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [199.307181] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [199.307317] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [199.307455] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [199.307595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [199.307744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [199.307879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [199.308013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [199.308148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [199.308282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [199.308416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [199.308549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [199.308796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [199.308931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [199.309064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [199.309198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [199.309332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [199.309464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [199.309597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [199.309745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [199.309882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [199.310019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [199.310154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [199.310289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [199.310423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [199.310557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [199.310697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [199.310830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [199.310962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [199.311094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [199.311228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [199.311359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [199.311490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [199.311627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.311758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.311889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.312020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [199.312151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [199.312282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.312414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.312545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [199.312685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [199.312816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [199.312948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [199.313079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [199.313211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [199.313341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [199.313472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [199.313609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [199.313742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [199.325884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [199.325972] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [199.326119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [199.326295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [199.326524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [199.326746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [199.326948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [199.327145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [199.327326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [199.327635] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [199.327771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [199.328134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [199.328834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [199.328971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [199.336335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [199.336667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [199.336902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [199.337640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [199.339033] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [199.339172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [199.339308] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [199.339446] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [199.339801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [199.339937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [199.340113] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [199.340339] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [199.340478] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [199.340743] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output <7> [199.345564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [199.345751] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [199.346544] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [199.346700] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [199.366076] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [199.366489] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [199.368336] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [199.368694] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [199.369172] [IGT] i915_pm_rpm: exiting, ret=0 <7> [199.385683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [199.386070] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [199.386223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [199.398372] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [199.398385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [199.398387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [199.398391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [199.400691] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [199.403100] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [199.406886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [199.407011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [199.407147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [199.411651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [199.411852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [199.422773] Console: switching to colour frame buffer device 240x67 <7> [199.422727] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [199.426913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [142.869075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [142.869087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [142.898753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.898762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.898765] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [142.898768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [142.901114] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [142.903581] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [142.907423] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [142.907558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [142.908058] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [142.908065] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [142.908069] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [142.908075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [142.908080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [142.908083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [142.908087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [142.908090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [142.908093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [142.908096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [142.908099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [142.908103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [142.908106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [142.908109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [142.908112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [142.908116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [142.908119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [142.908122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [142.908125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [142.908129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.908132] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.908135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.908138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [142.908141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [142.908145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [142.908148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [142.908151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [142.908154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [142.908157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [142.908160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [142.908163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [142.908167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.908170] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.908173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.908176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [142.908232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [142.908236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [142.912436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [142.912476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [142.912480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [142.916673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [142.916706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [142.916709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [142.920923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [142.924682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [142.924688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [142.928885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [142.929140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [142.929144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [142.933350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [142.933591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [142.933595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [142.937811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [142.938276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [142.938282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [142.967885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.967893] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.967896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [142.967899] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [142.970248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [142.972714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [142.976557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [142.976685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [142.977157] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [142.977163] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [142.977168] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [142.977173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [142.977177] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [142.977180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [142.977183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [142.977187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [142.977190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [142.977193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [142.977196] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [142.977199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [142.977203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [142.977206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [142.977209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [142.977212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [142.977215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [142.977218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [142.977222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [142.977225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.977228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.977231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [142.977234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [142.977237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [142.977240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [142.977243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [142.977247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [142.977250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [142.977253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [142.977256] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [142.977259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [142.977262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.977265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.977268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [142.977272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [142.977294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [142.977297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [142.981494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [142.981506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [142.981510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [142.985705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [142.985717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [142.985720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [142.989914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [144.028031] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [144.028320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [144.028939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [144.029585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [144.030169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [144.030304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [144.030438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [144.030571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [144.030705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [144.030838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [144.031013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [144.031178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [144.031311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [144.031443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [144.031575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [144.031708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [144.031842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [144.031983] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [144.032117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [144.032254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [144.032389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [144.032524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [144.032658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [144.032792] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [144.032925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [144.033071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [144.033206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [144.033339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [144.033472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [144.033604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [144.033737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [144.033870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [144.034011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [144.034143] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [144.034277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [144.034409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [144.034542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [144.034673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [144.034806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [144.034939] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [144.035108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [144.035240] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [144.035392] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [144.035523] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [144.035653] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [144.035782] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [144.035911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [144.036054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [144.036204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [144.036343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [144.036477] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [144.036624] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [144.036774] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [144.036909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [144.037057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [144.037191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [144.037324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [144.037458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [144.037591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [144.037723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [144.037901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.038062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.041489] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [144.062093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [144.062575] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output

<7> [144.067844] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [144.068436] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [144.069836] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [144.070346] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [144.070842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [144.071345] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [144.071692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [144.072055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [144.072407] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [144.072749] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [144.073269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.073725] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [144.074588] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [144.074815] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [144.177234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.177930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.178606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.180359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.181626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.189129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.190567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.191964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.192752] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.193328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.195321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [144.278112] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [144.294265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.295219] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.295833] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.296519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.297910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.298648] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.299410] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.300089] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.300750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.302632] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.303255] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.304497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.306546] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.307072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.317520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.317861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.319104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [144.362346] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.362379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.362385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [144.362390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [144.362873] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [144.365310] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [144.371749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [144.379482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [144.379614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [144.379794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [144.384421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [144.389270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [144.394255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [144.395308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.396699] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [144.396790] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [144.449271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [144.449513] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.449716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.451079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.451331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.455997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.457380] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.457827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.458127] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.458264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.458444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.510182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.510567] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.511238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.511867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.512594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.513300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.513976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.514633] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.515295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.516966] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.517535] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.518808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.521022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.521592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.533333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.533862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.534914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [144.536212] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [144.580353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.580364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.580368] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [144.580370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [144.584390] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [144.589645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [144.596117] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [144.596244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [144.596377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [144.601007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [144.605858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [144.649168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.649417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.657524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.659196] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.659972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.660751] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.661415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.662475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.760594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.761041] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.761649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.762318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.763010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.763689] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.764443] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.765153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.765781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.766547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.766682] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.767040] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.767743] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.767887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.774031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.774129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.774399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [144.775395] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [144.806860] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.806877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.806880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [144.806883] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [144.809275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [144.811677] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [144.815485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [144.815614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [144.815748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [144.822220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [144.827162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [144.897202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.897983] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.903856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.905364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.906101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.906888] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.907458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.908112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.002051] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.002428] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.003087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.003720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.004435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.005207] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.005909] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.006581] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.007303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.007890] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.008041] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.008329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.009012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.009149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.016551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.016742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.017285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.017989] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.051577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.051587] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.051590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.051593] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.053889] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.056291] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.060107] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.060236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.060369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.066145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.071100] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.121123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.121826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.127783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.129194] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.129433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.129717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.129865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.130038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.231679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.232158] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.232769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.233481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.234195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.234889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.235601] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.236350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.236994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.237666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.238278] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.238982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.240060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.240195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.247573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.247711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.248101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.249040] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.282535] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.282545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.282548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.282551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.284865] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.287375] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.291682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.291809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.292200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.297099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.301980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.361218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.361964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.367859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.369305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.370059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.370863] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.371434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.372096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.405005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.405381] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.406040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.406664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.407406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.408146] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.408868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.409521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.410184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.410900] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.411229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.411508] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.412195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.412330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.418471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.418571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.418838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.419013] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.453487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.453498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.453501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.453504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.455809] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.458245] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.462056] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.462186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.462322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.466845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.471723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.545223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.545971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.551897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.553523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.554315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.555261] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.555919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.556568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.650553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.651012] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.651623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.652299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.652994] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.653671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.654450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.655160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.655804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.656492] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.657099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.657843] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.658599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.658735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.666143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.666284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.666655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.667507] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.712138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.712149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.712152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.712155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.716177] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.721440] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.727914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.728042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.728177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.732777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.737667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.785133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.785572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.792590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.793967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.794230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.794522] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.794669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.794891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.892967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.893344] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.894002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.894626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.895363] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.896132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.896836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.897488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.898149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.898810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.898945] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.899229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.899930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.900078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.906223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.906324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.906593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.907694] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.941295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.941306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.941309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.941312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.943673] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.946137] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.951042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.951170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.951305] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.955887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.960754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.057112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.057504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.064472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.066146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.066996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.067859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.068470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.069263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.167686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.168170] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.168808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.169434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.170132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.170893] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.171584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.172276] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.172923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.173607] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.173748] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.174007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.174684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.174829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.180968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.181067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.181361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [146.181945] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [146.211546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.211558] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.211561] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.211564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.213908] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.216345] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.220129] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.220282] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.220418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.225262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.230146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.289207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.289958] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.295882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.297499] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.298364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.299280] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.299931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.300688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.395748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.396149] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.396793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.397504] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.398267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.399115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.399821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.400580] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.401336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.402225] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.402678] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.402979] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.403662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.403811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.412441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.412598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.413001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [146.413829] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [146.446388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.446398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.446401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.446403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.448711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.452166] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.457116] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.457242] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.457374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.461918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.466780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.520983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.521683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.527675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.529107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.529365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.529649] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.529800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.529974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.627382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.627835] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.628442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.629113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.629817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.630498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.631190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.631863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.632496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.633208] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.633813] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.634544] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.636765] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.637331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.646456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.646761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.647415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [146.648241] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [146.681859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.681870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.681873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.681876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.684168] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.686579] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.690376] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.690505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.690640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.695557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.700452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.753025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.753668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.759639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.761146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.761886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.762642] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.763257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.763847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [146.851031] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [146.865834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.866156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.866773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.867430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.868164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.868805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.869288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.869791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.870293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.870828] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.871246] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.871997] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.873233] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.873519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.882329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.882606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.883163] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [146.886320] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [146.915070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.915080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.915083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.915086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.917379] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.919783] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.923592] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.923743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.923883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.928861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.933675] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.938670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.939718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.941169] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [146.941372] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [147.000950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [147.001188] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.001415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.003224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.004082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.008827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.010163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.010427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.010734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.010883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.011085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.054850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.055229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.055895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.056816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.057790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.058846] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.059804] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.060777] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.061706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.062706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [147.063512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.064592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.067203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.068020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.078543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.078860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.079671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [147.080501] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [147.113819] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [147.113830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [147.113833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [147.113849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [147.116163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [147.118561] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [147.122365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [147.122494] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [147.122629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [147.127724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [147.132597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [147.193205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.193962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.199823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.201261] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.202017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.202821] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.203392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.204051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [152.326855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [152.327298] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [152.327906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [152.328577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.329273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.329966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.330709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.331444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.332128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.332533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [152.332666] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.332923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.333612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.333751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.341130] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [152.341259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.341525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [152.342477] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [152.374577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [152.374587] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [152.374590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [152.374593] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [152.376907] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [152.379335] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [152.383139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [152.383273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [152.383405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [152.387906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [152.392791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [152.448636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [152.449377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [152.455272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [152.456718] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [152.457473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [152.458267] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [152.458836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [152.459499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [154.561784] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [154.578316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.579051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.579895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.581010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.582027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.583115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.584149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.585233] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.586202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.588308] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [154.589170] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.590788] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.592833] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.593311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.605751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.605890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.640039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.640546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.640550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.640554] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.644329] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.646781] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.650618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.650766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.650907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [154.655319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [154.661337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [154.666722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [154.702639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.702647] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.702650] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [154.702653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [154.704972] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [154.707419] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [154.711241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [154.711367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [154.711500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [154.715716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [154.720569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [154.725458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.725751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.729101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.730418] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.730654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.730939] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.731092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.731265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.555811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.556191] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [157.556830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [157.557456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.558160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.558849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.559507] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.560189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.560837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [157.561526] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [157.561660] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [157.562048] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [157.562724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.562873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.570272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.570467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.570977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [157.571911] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [157.604218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [157.604228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [157.604231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [157.604234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [157.606534] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [157.608938] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [157.612739] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [157.612866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [157.613001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [157.617831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [157.622704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [157.679985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.680686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.686642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.688145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [157.688880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [157.689633] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [157.690258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [157.690898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [162.785360] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [162.785857] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [162.786502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [162.787137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [162.787883] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [162.788579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [162.789239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [162.789945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [162.790597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [162.790960] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [162.791095] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [162.791342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [162.792047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [162.792184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [162.798363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [162.798507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [162.798772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [162.799678] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [162.831757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [162.831768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [162.831771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [162.831774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [162.834082] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [162.836501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [162.840298] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [162.840441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [162.840577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [162.845132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [162.850004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [162.903495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [162.904185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [162.910162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [162.911519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [162.911771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [162.912091] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [162.912239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [162.912429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [164.799506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [164.811363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [164.811750] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [164.812387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [164.813017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [164.813739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.814494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.815209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.815919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.816620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [164.817533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [164.817669] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [164.818014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [164.818723] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [164.818868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [164.825018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [164.825108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [164.861104] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [164.861114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [164.861117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [164.861120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [164.863418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [164.865827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [164.869630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [164.869757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [164.869891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [164.874874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [164.879736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [164.884631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [164.921918] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [164.921925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [164.921928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [164.921931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [164.924749] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [164.927197] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [164.931041] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [164.931163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [164.931302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [164.936505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [164.941401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [164.946268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [164.946452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [164.949919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [164.951265] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [164.951548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [164.951830] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [164.951985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [164.952159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [168.013108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [168.013486] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [168.014121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [168.014750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.015455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.016156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.016817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.017505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.018156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [168.018812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [168.018947] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [168.019262] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [168.019946] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.020091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.027492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [168.027657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.028097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [168.028874] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [168.061233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [168.061243] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [168.061246] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [168.061249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [168.063554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [168.065949] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [168.069794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [168.069923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [168.070099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [168.074934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [168.079798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [168.135334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.136090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [168.143353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.144800] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [168.145138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [168.145463] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [168.145602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [168.145777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [173.242534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [173.242991] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [173.243596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [173.244272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [173.244955] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.245630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.246337] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.247016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.247646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [173.248222] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [173.248358] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [173.248607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [173.249292] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.249427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.255613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [173.255710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.256035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [173.257199] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [173.288149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [173.288160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [173.288163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [173.288165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [173.290464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [173.292873] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [173.296674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [173.296810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [173.296944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [173.301179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [173.306056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [173.391067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.391836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [173.397973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.399308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [173.399582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [173.399890] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [173.400092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [173.400331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [175.038904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [175.051746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [175.052128] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [175.052762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [175.053388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [175.054105] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.054863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.055565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.056284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.057006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [175.057570] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [175.057715] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [175.057970] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [175.058664] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.058800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.063816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [175.063904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.096879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [175.096889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [175.096892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [175.096895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [175.099607] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [175.102020] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [175.105822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [175.105954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [175.106089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [175.110978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [175.115844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [175.120735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [175.155311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [175.155318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [175.155321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [175.155324] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [175.157665] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [175.160113] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [175.163919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [175.164043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [175.164174] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [175.169226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [175.174088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [175.178965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.179139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [175.182618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [175.183959] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [175.184245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [175.184537] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [175.184702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [175.184885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [178.510665] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [178.511042] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [178.511706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [178.512334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [178.513077] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.513781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.514433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.515131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.515783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [178.516345] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [178.516483] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [178.516745] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [178.517415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [178.517592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [178.523763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [178.523868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [178.524142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [178.525203] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [178.559596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [178.559606] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [178.559610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [178.559613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [178.561924] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [178.564328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [178.568131] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [178.568263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [178.568397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [178.573120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [178.577995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [178.630783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [178.631524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [178.638591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [178.639955] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [178.640210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [178.640517] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [178.640666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [178.640867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [183.738422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [183.738811] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [183.739463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [183.740092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [183.740807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [183.741505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [183.742161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [183.742884] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [183.743543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [183.744232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [183.744388] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [183.744638] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [183.745340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [183.745474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [183.752871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [183.752969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [183.753257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [183.754375] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [183.786214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [183.786229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [183.786233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [183.786235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [183.789693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [183.792141] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [183.795977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [183.796105] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [183.796257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [183.800842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [183.805713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [183.862577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [183.862773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [183.868420] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [183.869872] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [183.870622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [183.871402] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [183.871965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [183.872634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [185.278438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [185.290363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [185.290774] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [185.291444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [185.292077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [185.292834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.293612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.294336] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.295046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.295776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [185.296032] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [185.296176] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [185.296443] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [185.297135] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.297289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.303423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [185.303516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.339349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.339380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.339383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [185.339386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [185.341672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [185.344123] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [185.347926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [185.348052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [185.348203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [185.352851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [185.357735] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [185.362632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [185.397410] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.397417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.397420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [185.397423] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [185.399933] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [185.402944] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [185.406746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [185.406872] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [185.407004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [185.412140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [185.416999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [185.421869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.422034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [185.425534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.426869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [185.427112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [185.427470] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [185.427618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [185.427802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [188.910110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [188.910490] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [188.911147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [188.911770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [188.912482] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.913172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.913832] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.914518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [188.915161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [188.915817] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [188.915952] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [188.916249] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [188.916930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.917077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.923235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [188.923352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [188.923622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [188.924818] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [188.956772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [188.956783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [188.956786] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [188.956789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [188.959097] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [188.961524] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [188.965320] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [188.965448] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [188.965583] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [188.970095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [188.974949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [189.030327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [189.030549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [189.036242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.037580] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [189.037817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [189.038109] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [189.038248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [189.038422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [194.078996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [194.079379] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [194.080032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [194.080676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [194.081424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [194.082128] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [194.082486] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [194.082680] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [194.082876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [194.083129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [194.083264] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [194.083515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [194.084207] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [194.084343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [194.091737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [194.091866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [194.092153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [194.093115] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [194.125127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [194.125138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [194.125141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [194.125144] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [194.127454] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [194.129906] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [194.133757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [194.133900] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [194.134039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [194.138490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [194.143361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [194.198215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [194.198766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [194.204773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [194.206259] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [194.206991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [194.207741] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [194.208387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [194.209036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [195.517914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [195.529878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [195.530292] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [195.530955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [195.531890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [195.532925] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [195.534013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [195.535002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [195.535724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [195.536017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [195.536304] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [195.536499] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [195.536852] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [195.537631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [195.537817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [195.545235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [195.545325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [195.580318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [195.580328] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [195.580331] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [195.580334] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [195.582638] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [195.585078] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [195.588896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [195.589023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [195.589158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [195.593377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [195.598243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [195.603126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [195.638992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [195.638999] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [195.639002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [195.639005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [195.641394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [195.643857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [195.647689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [195.647872] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [195.648004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [195.652371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [195.657237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [195.662094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [195.662263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [195.665738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [195.667101] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [195.667364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [195.667659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [195.667822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [195.668022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [199.294587] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [199.295498] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [199.299679] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [199.299870] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [199.300012] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [199.300170] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A]

<7> [199.300313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [199.300467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [199.300614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [199.300751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [199.300885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [199.301019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [199.301153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [199.301286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [199.301419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [199.301552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [199.301708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [199.301857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [199.301989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [199.302121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [199.302253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [199.302385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [199.302517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [199.302662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [199.302793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [199.302925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [199.303056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [199.303188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [199.303321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [199.303453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [199.303585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [199.303729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [199.303861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [199.303992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [199.304125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [199.304257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [199.304390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [199.304523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [199.304702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [199.304836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [199.304969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [199.305102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [199.305235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [199.305368] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [199.305526] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [199.305668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [199.305802] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [199.305933] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [199.306063] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [199.306193] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [199.306323] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [199.306457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [199.306611] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [199.306749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [199.306885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [199.307032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [199.307181] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [199.307317] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [199.307455] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [199.307595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [199.307744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [199.307879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [199.308013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [199.308148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [199.308282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [199.308416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [199.308549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [199.308796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [199.308931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [199.309064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [199.309198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [199.309332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [199.309464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [199.309597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [199.309745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [199.309882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [199.310019] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [199.310154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [199.310289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [199.310423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [199.310557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [199.310697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [199.310830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [199.310962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [199.311094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [199.311228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [199.311359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [199.311490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [199.311627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.311758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.311889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.312020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [199.312151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [199.312282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.312414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.312545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [199.312685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [199.312816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [199.312948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [199.313079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [199.313211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [199.313341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [199.313472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [199.313609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [199.313742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [199.325884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [199.325972] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [199.326119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [199.326295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [199.326524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [199.326746] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [199.326948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [199.327145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [199.327326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [199.327635] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [199.327771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [199.328134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [199.328834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [199.328971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [199.336335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [199.336667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [199.336902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [199.337640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [199.339033] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [199.339172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [199.339308] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [199.339446] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [199.339801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [199.339937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [199.340113] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [199.340339] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [199.340478] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [199.340743] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output

<7> [199.345564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [199.345751] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [199.346544] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [199.346700] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [199.366076] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [199.366489] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [199.368336] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [199.368694] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [199.385683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [199.386070] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [199.386223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [199.398372] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [199.398385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [199.398387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [199.398391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [199.400691] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [199.403100] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [199.406886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [199.407011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [199.407147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [199.411651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [199.411852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [199.422773] Console: switching to colour frame buffer device 240x67

<7> [199.422727] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [199.426913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress