igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	54.86 seconds
Hostname	shard-rkl-5
Igt-Version	IGT-Version: 2.4-g4568b2c14 (x86_64) (Linux: 7.1.0-rc1-CI_DRM_18370-gc93b360cbbcb+ x86_64)
Out	Using IGT_SRANDOM=1777329357 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888119ad17b8 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.473s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.386s) Subtest gem-execbuf-stress: SUCCESS (54.862s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.473s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.386s) Subtest gem-execbuf-stress: SUCCESS (54.862s)
Dmesg	<6> [99.369022] Console: switching to colour dummy device 80x25 <6> [99.369077] [IGT] i915_pm_rpm: executing <7> [99.371642] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [99.372358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [99.372372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [99.402016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [99.402026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [99.402028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [99.402031] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [99.404328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [99.406752] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [99.410551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [99.410677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [99.411138] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [99.411144] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [99.411149] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [99.411154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [99.411158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [99.411162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [99.411165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [99.411168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [99.411171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [99.411175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [99.411313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [99.411317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [99.411320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [99.411323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [99.411326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [99.411330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [99.411333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [99.411336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [99.411339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [99.411342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.411346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.411349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.411352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [99.411355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [99.411358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [99.411361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [99.411365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [99.411368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [99.411371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [99.411374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [99.411377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [99.411381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.411384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.411387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.411390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [99.411443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [99.411446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [99.415631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [99.415667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [99.415671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [99.419870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [99.419900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [99.419904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [99.424093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [99.427831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [99.427837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [99.432040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [99.432309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [99.432313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [99.436513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [99.436751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [99.436755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [99.440942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [99.441251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [99.441255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [99.470790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [99.470798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [99.470801] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [99.470803] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [99.473091] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [99.475520] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [99.479307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [99.479433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [99.479888] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [99.479894] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [99.479899] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [99.479904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [99.479907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [99.479911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [99.479914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [99.479917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [99.479921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [99.479924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [99.479927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [99.479930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [99.479933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [99.479936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [99.479940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [99.479943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [99.479946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [99.479949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [99.479952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [99.479956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.479959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.479962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [99.479965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [99.479968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [99.479971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [99.479975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [99.479978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [99.479981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [99.479984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [99.479987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [99.479990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [99.479994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.479997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.480000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [99.480003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [99.480025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [99.480029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [99.484228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [99.484241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [99.484244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [99.488423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [99.488434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [99.488438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [99.492620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [99.492820] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:418] <7> [100.530850] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [100.531153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [100.531892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [100.532562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [100.533194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [100.533868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [100.534345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [100.534509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [100.534639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [100.534770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [100.534900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [100.535030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [100.535160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [100.535316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [100.535448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [100.535582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [100.535714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [100.535847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [100.535979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [100.536112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [100.536250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [100.536382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [100.536516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [100.536649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [100.536781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [100.536913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [100.537045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [100.537177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [100.537317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [100.537450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [100.537582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [100.537715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [100.537846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [100.537980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [100.538113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [100.538254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [100.538387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [100.538519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [100.538651] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [100.538784] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [100.538941] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [100.539074] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [100.539227] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [100.539378] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [100.539512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [100.539641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [100.539771] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [100.539900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [100.540047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [100.540183] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [100.540326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [100.540473] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [100.540624] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [100.540759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [100.540893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [100.541027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [100.541158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [100.541298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [100.541430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [100.541562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [100.541735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.541874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.546742] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [100.567400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [100.567909] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output <7> [100.573136] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [100.573730] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [100.574232] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [100.574778] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [100.575316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [100.575802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [100.576183] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [100.576606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [100.576991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [100.577410] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [100.577975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [100.578486] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [100.579283] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [100.579542] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [100.681733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.682459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.683046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.684833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.686126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.691107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.692536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [100.692894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [100.693184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [100.693342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [100.693921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [100.782953] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [100.783787] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [100.784321] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [100.799577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.800321] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [100.800935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [100.801596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [100.802289] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.802964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.804309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.804970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.805682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [100.807426] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [100.807986] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [100.809205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [100.811306] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.811756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.823072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.823595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.823775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [100.832386] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [100.855507] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [100.855517] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [100.855520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [100.855523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [100.857822] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [100.860275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [100.864076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [100.864208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [100.864370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [100.869309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [100.874113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [100.879085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.880125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.881645] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [100.881740] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [100.937715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.938388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.938930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.940693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.941577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.948676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.950242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [100.951770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [100.953013] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [100.953644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [100.954165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.994541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.994913] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [100.995566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [100.996190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [100.996907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.997608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.998265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.998961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [100.999614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [101.000245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [101.000415] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [101.000791] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [101.001512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.001648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.009006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.009317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.009483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [101.012059] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [101.043845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [101.043856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [101.043859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [101.043862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [101.046167] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [101.048601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [101.052412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [101.052544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [101.052679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [101.057541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [101.062415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [101.129509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.129708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.135281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.136677] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [101.136989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [101.137305] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [101.137464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [101.137686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.250497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.250864] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [101.251507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [101.252147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [101.252911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.253682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.254429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.255081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.255743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [101.257007] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [101.257608] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [101.258663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [101.260708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.261281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.270403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.270603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.271236] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [101.271500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [101.305097] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [101.305107] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [101.305110] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [101.305113] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [101.307955] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [101.310374] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [101.314177] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [101.314310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [101.314443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [101.319651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [101.324529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [101.385407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.385657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.392543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.393906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [101.394200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [101.394496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [101.394635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [101.394815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.497509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.497882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [101.498532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [101.499435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [101.500468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.501472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.502407] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.503223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.503489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [101.503769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [101.503963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [101.504283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [101.505075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.505256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.511420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.511528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.511804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [101.512009] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [101.547488] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [101.547498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [101.547501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [101.547504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [101.549831] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [101.553382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [101.557189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [101.557325] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [101.557459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [101.562418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [101.567290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [101.617599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.618234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.625430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.627042] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [101.627827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [101.628711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [101.629561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [101.630208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.726009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.726438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [101.727038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [101.727702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [101.728392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.729086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.729837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.730555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.731181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [101.731613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [101.731746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [101.732006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [101.732693] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.732829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.738975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.739073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.739329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [101.739941] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [101.774675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [101.774685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [101.774688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [101.774691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [101.776988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [101.779448] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [101.783244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [101.783382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [101.783515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [101.788395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [101.793261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [101.881560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.882250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.888252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.889624] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [101.889883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [101.890190] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [101.890345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [101.890527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.992494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.992865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [101.993519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [101.994141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [101.994840] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.995624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.996341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.997011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [101.997734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [101.998464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [101.999028] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [101.999395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [102.000081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [102.000216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [102.010075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [102.010280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [102.011595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [102.012491] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [102.044987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [102.044997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [102.045000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [102.045003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [102.047342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [102.049755] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [102.053550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [102.053677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [102.053810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [102.058004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [102.062872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [102.121544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [102.121770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [102.127455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [102.128842] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [102.129531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [102.130245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [102.130872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [102.132149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [102.166536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [102.166907] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [102.167553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [102.168171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [102.168880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.169651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.170383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.171034] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.171755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [102.172498] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [102.173086] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [102.173873] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [102.176020] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [102.176611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [102.186875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [102.187084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [102.187664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [102.188308] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [102.222009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [102.222020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [102.222023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [102.222026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [102.224351] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [102.226771] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [102.230556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [102.230686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [102.230819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [102.235685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [102.240540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [102.297610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [102.298242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [102.304178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [102.305697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [102.306412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [102.307160] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [102.307767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [102.308419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [102.403500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [102.403870] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [102.404513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [102.405136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [102.405842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.406536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.407194] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.407882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.408524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [102.409201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [102.409846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [102.410549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [102.412614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [102.413176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [102.422310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [102.422609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [102.423230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [102.424495] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [102.457746] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [102.457757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [102.457760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [102.457763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [102.460103] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [102.462520] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [102.466330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [102.466479] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [102.466612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [102.471641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [102.476522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [102.529748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [102.530444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [102.536308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [102.537761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [102.538431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [102.539128] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [102.539682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [102.540256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [102.570451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [102.570830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [102.571461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [102.572085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [102.572823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.573514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.574173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.574860] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.575498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [102.576181] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [102.576315] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [102.576623] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [102.577313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [102.577467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [102.583613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [102.583714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [102.583980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [102.585005] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [102.617072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [102.617082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [102.617085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [102.617088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [102.620022] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [102.622437] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [102.626237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [102.626371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [102.626506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [102.631716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [102.636606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [102.689640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [102.690307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [102.698702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [102.700145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [102.700842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [102.701653] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [102.702218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [102.702841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [102.798352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [102.798831] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [102.799461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [102.800084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [102.800819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.801571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.802249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.802985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [102.803710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [102.804422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [102.804968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [102.805217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [102.805907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [102.806042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [102.815891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [102.816083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [102.816734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [102.817763] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [102.851155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [102.851165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [102.851168] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [102.851171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [102.853507] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [102.855976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [102.859782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [102.859907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [102.860041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [102.864952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [102.869821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [102.921567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [102.922254] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [102.928218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [102.929613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [102.929863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [102.930147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [102.930286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [102.930469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [103.031411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [103.031801] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [103.032430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [103.033057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [103.033804] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.034497] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.035155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.035853] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.036496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [103.037166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [103.037799] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [103.038549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [103.040632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [103.041201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [103.051582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [103.051942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [103.052659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [103.053562] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [103.099856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [103.099867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [103.099869] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [103.099872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [103.103982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [103.111614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [103.118132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [103.118259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [103.118399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [103.123040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [103.127902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [103.161683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [103.161897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [103.167540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [103.168972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [103.169650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [103.170431] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [103.170994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [103.171643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [103.257231] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [103.258054] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [103.258520] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [103.273559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [103.273799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [103.274213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [103.274693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [103.275200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.275739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.276285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.276851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.277359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [103.277933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [103.278381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [103.279351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [103.280981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [103.281414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [103.290334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [103.290551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [103.290903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [103.294062] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [103.323091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [103.323100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [103.323103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [103.323106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [103.325441] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [103.328819] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [103.332716] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [103.332845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [103.332981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [103.337365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [103.342219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [103.347207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [103.348235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [103.349662] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [103.349808] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [103.401833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [103.402565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [103.403162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [103.404948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [103.405916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [103.413349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [103.415145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [103.416142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [103.417268] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [103.417966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [103.418680] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [103.462608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [103.462981] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [103.463643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [103.464515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [103.465256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.466343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.467192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.468108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [103.468896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [103.469777] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [103.470497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [103.471337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [103.473616] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [103.474200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [103.484593] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [103.484743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [103.485434] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [103.486755] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [103.518268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [103.518278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [103.518282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [103.518285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [103.520625] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [103.523038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [103.526841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [103.526970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [103.527103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [103.532443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [103.537266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [103.593639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [103.593844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [103.600690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [103.602382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [103.603441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [103.604454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [103.605284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [103.606173] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [103.717959] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [103.717978] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [103.717985] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [103.717992] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [108.715867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [108.716283] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [108.717000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [108.717794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [108.718532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [108.719370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [108.720073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [108.720509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [108.720715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [108.720968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [108.721104] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [108.721355] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [108.722059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [108.722191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [108.729582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [108.729712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [108.729990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [108.730925] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [108.763325] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [108.763335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [108.763338] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [108.763341] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [108.765632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [108.768053] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [108.771858] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [108.771987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [108.772121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [108.776486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [108.781358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [108.833878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [108.834563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [108.840513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [108.841925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [108.842174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [108.842496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [108.842649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [108.842826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [110.859590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [110.873020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [110.873704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [110.874441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [110.875201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [110.875959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [110.876696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [110.877472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [110.878225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [110.878584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [110.878957] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [110.879092] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [110.879435] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [110.880137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [110.880273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [110.886488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [110.886620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [110.921022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [110.921033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [110.921036] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [110.921040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [110.923395] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [110.925814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [110.929616] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [110.929749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [110.929888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [110.934371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [110.939247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [110.944498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [110.980001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [110.980009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [110.980012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [110.980015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [110.982358] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [110.984756] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [110.988605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [110.988735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [110.988867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [110.993443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [110.998316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [111.003210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [111.003488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [111.006856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [111.008202] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [111.008438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [111.008733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [111.008881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [111.009056] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [113.944762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [113.945276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [113.945966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [113.946651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [113.947454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [113.948225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [113.948954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [113.949664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [113.950394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [113.950646] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [113.950780] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [113.951083] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [113.951766] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [113.951923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [113.958103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [113.958200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [113.958469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [113.959392] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [113.990462] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [113.990472] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [113.990475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [113.990478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [113.992775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [113.995205] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [113.999019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [113.999148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [113.999284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [114.003694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [114.008581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [114.066202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [114.066789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [114.072766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [114.074154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [114.074434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [114.074717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [114.074866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [114.075038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [119.173204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [119.173611] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [119.174347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [119.175128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [119.175873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [119.176693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [119.177450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [119.178206] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [119.178864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [119.179135] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [119.179280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [119.179529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [119.180246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [119.180380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [119.187791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [119.187887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [119.188171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [119.189096] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [119.219149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [119.219159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [119.219163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [119.219165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [119.221463] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [119.223871] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [119.227673] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [119.227800] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [119.227935] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [119.232138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [119.237012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [119.290279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [119.291110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [119.296866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [119.298243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [119.298482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [119.298765] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [119.298903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [119.299088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [121.098339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [121.111236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [121.111643] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [121.112390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [121.113085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [121.113792] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [121.114576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [121.115334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [121.116025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [121.116765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [121.117303] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [121.117442] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [121.117787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [121.118512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [121.118649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [121.124785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [121.124878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [121.159412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [121.159422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [121.159425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [121.159428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [121.161730] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [121.164159] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [121.168017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [121.168153] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [121.168289] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [121.172742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [121.177626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [121.182515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [121.218284] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [121.218290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [121.218293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [121.218296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [121.220632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [121.223037] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [121.226969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [121.227102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [121.227231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [121.232062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [121.236932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [121.241826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [121.242011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [121.245475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [121.246817] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [121.247056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [121.247354] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [121.247493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [121.247664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.403277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.403692] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.404426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.405350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.406075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [124.406880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [124.407631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [124.408362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [124.408998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.409260] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [124.409393] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.409650] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.410340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.410476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.417871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.417970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.418251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [124.419210] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [124.452377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [124.452388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [124.452391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [124.452394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [124.454704] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [124.457117] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [124.460923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [124.461054] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [124.461210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [124.466145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [124.471023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [124.522478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.523113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.529057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.530501] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.531193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.531957] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.532545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.533117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [129.633121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [129.633622] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [129.634322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [129.635273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [129.637552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [129.638622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [129.639111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [129.639388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [129.639633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [129.639916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [129.640100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [129.640447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [129.641213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [129.641428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [129.647699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [129.647824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.648092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [129.648989] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [129.681106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [129.681117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [129.681120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [129.681122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [129.683443] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [129.685896] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [129.689711] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [129.689840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [129.689976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [129.694887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [129.699733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [129.754593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.755232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [129.761173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [129.762548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [129.762796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [129.763079] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [129.763219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [129.763402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [131.338503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [131.350482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [131.350856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [131.351494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [131.352120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [131.352828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [131.353515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [131.354172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [131.354884] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [131.355532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [131.356494] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [131.356629] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [131.356920] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [131.357628] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [131.357769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [131.363910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [131.364001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [131.398303] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.398313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.398316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [131.398327] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [131.400622] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [131.403072] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [131.406857] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [131.406983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [131.407118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [131.412431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [131.417290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [131.422182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [131.455967] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [131.455974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [131.455977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [131.455979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [131.458276] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [131.460684] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [131.464487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [131.464607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [131.464736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [131.468952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [131.473822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [131.478701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [131.478883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [131.482334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [131.483704] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [131.483958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [131.484242] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [131.484389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [131.484560] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.862621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.863034] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [134.863750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [134.864463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [134.865191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.865560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.865761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.865958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.866138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [134.866392] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [134.866552] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [134.866827] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [134.867518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.867655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.875025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.875246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.875827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.877013] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [134.911385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [134.911396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [134.911399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [134.911669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [134.913993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [134.916442] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [134.920253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [134.920382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [134.920531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.924804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.929669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.986579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.986969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.992703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.994074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [134.994310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [134.994604] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [134.994742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [134.994916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.034287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.034779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [140.035436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [140.036183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [140.036976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [140.037724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [140.038431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [140.039190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [140.039906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [140.040180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [140.040312] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [140.040585] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [140.041277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.041410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.050050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.050149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.050416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [140.052930] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [140.084671] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [140.084681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [140.084684] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [140.084687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [140.086994] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [140.089384] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [140.093217] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [140.093345] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [140.093479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [140.098407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [140.103282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [140.162682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.163316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.169188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.170628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [140.171309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [140.172116] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [140.172697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [140.173273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.578826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [141.591724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.592126] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [141.592818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [141.593479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [141.594268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.595040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.595783] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.596515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.597207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [141.597931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [141.598138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [141.598395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [141.599095] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.599232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.604246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.604338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.637556] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [141.637565] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [141.637568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [141.637571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [141.641098] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [141.643500] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [141.647283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [141.647614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [141.647750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [141.652650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [141.657509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [141.662402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [141.696435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [141.696443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [141.696446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [141.696449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [141.698743] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [141.701147] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [141.704943] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [141.705064] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [141.705194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [141.709429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [141.714307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [141.719180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.719365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.723989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.725402] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [141.725703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [141.725988] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [141.726129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [141.726303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.199834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.200244] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.200964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.201667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.202394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.203167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.203651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.203848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.204028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.204281] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.204416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.204678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.205367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.205500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.211669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.211780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.212045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.212795] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [145.245235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.245245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.245248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.245251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.247547] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.249953] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.253731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.253858] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.253992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.258576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.263442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.314896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.315531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.321523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.323014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.323729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.324434] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.325004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.325647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [145.439295] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [145.439314] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [145.439321] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [145.439328] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [150.426651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [150.427168] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [150.427864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [150.428856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [150.429895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [150.430969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [150.432018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [150.432286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [150.432531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [150.432835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [150.433032] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [150.433350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [150.434121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [150.434318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [150.441723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [150.441834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [150.442165] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [150.442271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [150.475420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [150.475430] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [150.475433] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [150.475436] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [150.478976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [150.481515] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [150.485356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [150.485544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [150.485754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [150.491194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [150.496047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [150.547029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [150.547859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [150.553746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [150.555200] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [150.555947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [150.556700] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [150.557337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [150.557987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [151.819011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [151.830900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [151.831306] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [151.832042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [151.832849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [151.833643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.834490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.835304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.836036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [151.836603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [151.836831] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [151.836968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [151.837220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [151.837928] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [151.838065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [151.844204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [151.844296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [151.879000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [151.879009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [151.879012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [151.879015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [151.881336] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [151.883767] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [151.887607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [151.887746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [151.887882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [151.892301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [151.897178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [151.902068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [151.936595] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [151.936602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [151.936605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [151.936608] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [151.938887] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [151.941297] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [151.945104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [151.945230] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [151.945364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [151.949996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [151.954888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [151.959775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [151.959927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [151.963389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [151.964747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [151.965012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [151.965305] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [151.965452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [151.965654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [155.644649] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [155.645618] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [155.649765] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [155.650103] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [155.650236] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [155.650378] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A] <7> [155.650512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [155.650654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [155.650805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [155.650951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [155.651088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [155.651222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [155.651355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [155.651488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [155.651621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [155.651753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [155.651895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [155.652028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [155.652160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [155.652294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [155.652426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [155.652558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [155.652691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [155.652833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [155.652965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [155.653096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [155.653228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [155.653360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [155.653492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [155.653624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [155.653755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [155.653928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [155.654061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [155.654192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [155.654323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [155.654455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [155.654588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [155.654720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [155.654863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [155.654996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [155.655129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [155.655262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [155.655393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [155.655526] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [155.655687] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [155.655832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [155.655967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [155.656098] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [155.656228] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [155.656358] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [155.656492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [155.656624] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [155.656772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [155.656926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [155.657062] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [155.657211] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [155.657363] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [155.657499] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [155.657637] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [155.657777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [155.658027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [155.658166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [155.658303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [155.658437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [155.658572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [155.658704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [155.658864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [155.658998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [155.659129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [155.659262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [155.659394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [155.659526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [155.659660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [155.659835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [155.659968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [155.660101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [155.660234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [155.660366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [155.660498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [155.660631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [155.660763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [155.660910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [155.661042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [155.661174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [155.661307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [155.661439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [155.661571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [155.661702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [155.661847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.661980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.662111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.662243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [155.662374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [155.662506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.662642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.662774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [155.662919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [155.663051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [155.663185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [155.663317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [155.663451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [155.663582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [155.663713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [155.663855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [155.663993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [155.676100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.676225] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.676394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.676583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.676851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.677090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.677295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.677494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.677675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.677931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.678067] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.678571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.679286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.679425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.689250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.689650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.689792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [155.690572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.692172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [155.692311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [155.692447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [155.692582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [155.692716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [155.692882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [155.693061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [155.693291] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [155.693429] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [155.693681] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output <7> [155.698486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [155.698664] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [155.699464] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [155.699618] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [155.718930] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [155.719206] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [155.720273] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [155.720309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [155.721131] [IGT] i915_pm_rpm: exiting, ret=0 <7> [155.737874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [155.738116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.738264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.749965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.749980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.749983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.749987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.752293] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.754703] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.758506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.758628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.758764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [155.763229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [155.763483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [155.775698] Console: switching to colour frame buffer device 240x67 <7> [155.775663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [155.779912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [99.372358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [99.372372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [99.402016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [99.402026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [99.402028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [99.402031] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [99.404328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [99.406752] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [99.410551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [99.410677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [99.411138] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [99.411144] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [99.411149] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [99.411154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [99.411158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [99.411162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [99.411165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [99.411168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [99.411171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [99.411175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [99.411313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [99.411317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [99.411320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [99.411323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [99.411326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [99.411330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [99.411333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [99.411336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [99.411339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [99.411342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.411346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.411349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.411352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [99.411355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [99.411358] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [99.411361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [99.411365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [99.411368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [99.411371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [99.411374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [99.411377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [99.411381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.411384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.411387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.411390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [99.411443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [99.411446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [99.415631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [99.415667] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [99.415671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [99.419870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [99.419900] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [99.419904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [99.424093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [99.427831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [99.427837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [99.432040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [99.432309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [99.432313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [99.436513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [99.436751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [99.436755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [99.440942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [99.441251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [99.441255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [99.470790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [99.470798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [99.470801] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [99.470803] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [99.473091] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [99.475520] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [99.479307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [99.479433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [99.479888] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [99.479894] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [99.479899] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [99.479904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [99.479907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [99.479911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [99.479914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [99.479917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [99.479921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [99.479924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [99.479927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [99.479930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [99.479933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [99.479936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [99.479940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [99.479943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [99.479946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [99.479949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [99.479952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [99.479956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.479959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.479962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [99.479965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [99.479968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [99.479971] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [99.479975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [99.479978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [99.479981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [99.479984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [99.479987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [99.479990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [99.479994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.479997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.480000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [99.480003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [99.480025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [99.480029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [99.484228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [99.484241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [99.484244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [99.488423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [99.488434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [99.488438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [99.492620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [100.530850] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [100.531153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [100.531892] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [100.532562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [100.533194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [100.533868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [100.534345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [100.534509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [100.534639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [100.534770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [100.534900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [100.535030] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [100.535160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [100.535316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [100.535448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [100.535582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [100.535714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [100.535847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [100.535979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [100.536112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [100.536250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [100.536382] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [100.536516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [100.536649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [100.536781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [100.536913] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [100.537045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [100.537177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [100.537317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [100.537450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [100.537582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [100.537715] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [100.537846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [100.537980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [100.538113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [100.538254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [100.538387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [100.538519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [100.538651] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [100.538784] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [100.538941] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [100.539074] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [100.539227] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [100.539378] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [100.539512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [100.539641] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [100.539771] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [100.539900] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [100.540047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [100.540183] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [100.540326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [100.540473] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [100.540624] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [100.540759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [100.540893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [100.541027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [100.541158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [100.541298] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [100.541430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [100.541562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [100.541735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [100.541874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [100.546742] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [100.567400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [100.567909] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output

<7> [100.573136] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [100.573730] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [100.574232] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [100.574778] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [100.575316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [100.575802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [100.576183] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [100.576606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [100.576991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [100.577410] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [100.577975] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [100.578486] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [100.579283] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [100.579542] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [100.681733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [100.682459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [100.683046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [100.684833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [100.686126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [100.691107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [100.692536] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [100.692894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [100.693184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [100.693342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [100.693921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [100.782953] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [100.799577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [100.800321] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [100.800935] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [100.801596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [100.802289] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.802964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.804309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.804970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.805682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [100.807426] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [100.807986] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [100.809205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [100.811306] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [100.811756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [100.823072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [100.823595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [100.823775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [100.832386] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [100.855507] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [100.855517] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [100.855520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [100.855523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [100.857822] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [100.860275] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [100.864076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [100.864208] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [100.864370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [100.869309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [100.874113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [100.879085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [100.880125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [100.881645] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [100.881740] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [100.937715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [100.938388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [100.938930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [100.940693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [100.941577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [100.948676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [100.950242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [100.951770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [100.953013] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [100.953644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [100.954165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [100.994541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [100.994913] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [100.995566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [100.996190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [100.996907] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.997608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.998265] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.998961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [100.999614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [101.000245] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [101.000415] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [101.000791] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [101.001512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [101.001648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [101.009006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [101.009317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [101.009483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [101.012059] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [101.043845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [101.043856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [101.043859] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [101.043862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [101.046167] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [101.048601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [101.052412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [101.052544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [101.052679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [101.057541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [101.062415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [101.129509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [101.129708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [101.135281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [101.136677] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [101.136989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [101.137305] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [101.137464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [101.137686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [101.250497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [101.250864] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [101.251507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [101.252147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [101.252911] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.253682] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.254429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.255081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.255743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [101.257007] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [101.257608] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [101.258663] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [101.260708] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [101.261281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [101.270403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [101.270603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [101.271236] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [101.271500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [101.305097] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [101.305107] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [101.305110] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [101.305113] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [101.307955] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [101.310374] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [101.314177] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [101.314310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [101.314443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [101.319651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [101.324529] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [101.385407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [101.385657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [101.392543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [101.393906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [101.394200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [101.394496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [101.394635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [101.394815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [101.497509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [101.497882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [101.498532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [101.499435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [101.500468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.501472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.502407] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.503223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.503489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [101.503769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [101.503963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [101.504283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [101.505075] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [101.505256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [101.511420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [101.511528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [101.511804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [101.512009] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [101.547488] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [101.547498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [101.547501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [101.547504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [101.549831] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [101.553382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [101.557189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [101.557325] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [101.557459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [101.562418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [101.567290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [101.617599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [101.618234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [101.625430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [101.627042] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [101.627827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [101.628711] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [101.629561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [101.630208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [101.726009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [101.726438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [101.727038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [101.727702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [101.728392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.729086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.729837] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.730555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.731181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [101.731613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [101.731746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [101.732006] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [101.732693] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [101.732829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [101.738975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [101.739073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [101.739329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [101.739941] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [101.774675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [101.774685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [101.774688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [101.774691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [101.776988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [101.779448] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [101.783244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [101.783382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [101.783515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [101.788395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [101.793261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [101.881560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [101.882250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [101.888252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [101.889624] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [101.889883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [101.890190] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [101.890345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [101.890527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [101.992494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [101.992865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [101.993519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [101.994141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [101.994840] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.995624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.996341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.997011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [101.997734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [101.998464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [101.999028] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [101.999395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [102.000081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [102.000216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [102.010075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [102.010280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [102.011595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [102.012491] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [102.044987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [102.044997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [102.045000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [102.045003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [102.047342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [102.049755] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [102.053550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [102.053677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [102.053810] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [102.058004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [102.062872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [102.121544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [102.121770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [102.127455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [102.128842] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [102.129531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [102.130245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [102.130872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [102.132149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [102.166536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [102.166907] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [102.167553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [102.168171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [102.168880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.169651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.170383] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.171034] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.171755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [102.172498] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [102.173086] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [102.173873] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [102.176020] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [102.176611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [102.186875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [102.187084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [102.187664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [102.188308] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [102.222009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [102.222020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [102.222023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [102.222026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [102.224351] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [102.226771] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [102.230556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [102.230686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [102.230819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [102.235685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [102.240540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [102.297610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [102.298242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [102.304178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [102.305697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [102.306412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [102.307160] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [102.307767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [102.308419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [102.403500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [102.403870] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [102.404513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [102.405136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [102.405842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.406536] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.407194] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.407882] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.408524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [102.409201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [102.409846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [102.410549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [102.412614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [102.413176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [102.422310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [102.422609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [102.423230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [102.424495] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [102.457746] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [102.457757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [102.457760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [102.457763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [102.460103] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [102.462520] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [102.466330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [102.466479] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [102.466612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [102.471641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [102.476522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [102.529748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [102.530444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [102.536308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [102.537761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [102.538431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [102.539128] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [102.539682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [102.540256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [102.570451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [102.570830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [102.571461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [102.572085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [102.572823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.573514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.574173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.574860] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.575498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [102.576181] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [102.576315] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [102.576623] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [102.577313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [102.577467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [102.583613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [102.583714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [102.583980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [102.585005] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [102.617072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [102.617082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [102.617085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [102.617088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [102.620022] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [102.622437] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [102.626237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [102.626371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [102.626506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [102.631716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [102.636606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [102.689640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [102.690307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [102.698702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [102.700145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [102.700842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [102.701653] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [102.702218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [102.702841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [102.798352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [102.798831] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [102.799461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [102.800084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [102.800819] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.801571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.802249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.802985] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [102.803710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [102.804422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [102.804968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [102.805217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [102.805907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [102.806042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [102.815891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [102.816083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [102.816734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [102.817763] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [102.851155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [102.851165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [102.851168] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [102.851171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [102.853507] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [102.855976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [102.859782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [102.859907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [102.860041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [102.864952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [102.869821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [102.921567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [102.922254] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [102.928218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [102.929613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [102.929863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [102.930147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [102.930286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [102.930469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [103.031411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [103.031801] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [103.032430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [103.033057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [103.033804] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.034497] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.035155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.035853] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.036496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [103.037166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [103.037799] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [103.038549] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [103.040632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [103.041201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [103.051582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [103.051942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [103.052659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [103.053562] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [103.099856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [103.099867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [103.099869] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [103.099872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [103.103982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [103.111614] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [103.118132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [103.118259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [103.118399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [103.123040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [103.127902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [103.161683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [103.161897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [103.167540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [103.168972] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [103.169650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [103.170431] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [103.170994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [103.171643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [103.258054] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [103.273559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [103.273799] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [103.274213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [103.274693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [103.275200] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.275739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.276285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.276851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.277359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [103.277933] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [103.278381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [103.279351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [103.280981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [103.281414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [103.290334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [103.290551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [103.290903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [103.294062] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [103.323091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [103.323100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [103.323103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [103.323106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [103.325441] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [103.328819] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [103.332716] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [103.332845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [103.332981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [103.337365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [103.342219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [103.347207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [103.348235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [103.349662] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [103.349808] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [103.401833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [103.402565] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [103.403162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [103.404948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [103.405916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [103.413349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [103.415145] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [103.416142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [103.417268] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [103.417966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [103.418680] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [103.462608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [103.462981] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [103.463643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [103.464515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [103.465256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.466343] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.467192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.468108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [103.468896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [103.469777] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [103.470497] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [103.471337] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [103.473616] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [103.474200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [103.484593] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [103.484743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [103.485434] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [103.486755] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [103.518268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [103.518278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [103.518282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [103.518285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [103.520625] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [103.523038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [103.526841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [103.526970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [103.527103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [103.532443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [103.537266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [103.593639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [103.593844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [103.600690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [103.602382] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [103.603441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [103.604454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [103.605284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [103.606173] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [103.717959] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [103.717978] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [103.717985] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [108.715867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [108.716283] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [108.717000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [108.717794] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [108.718532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [108.719370] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [108.720073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [108.720509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [108.720715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [108.720968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [108.721104] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [108.721355] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [108.722059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [108.722191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [108.729582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [108.729712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [108.729990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [108.730925] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [108.763325] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [108.763335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [108.763338] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [108.763341] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [108.765632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [108.768053] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [108.771858] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [108.771987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [108.772121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [108.776486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [108.781358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [108.833878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [108.834563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [108.840513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [108.841925] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [108.842174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [108.842496] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [108.842649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [108.842826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [110.859590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [110.873020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [110.873704] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [110.874441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [110.875201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [110.875959] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [110.876696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [110.877472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [110.878225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [110.878584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [110.878957] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [110.879092] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [110.879435] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [110.880137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [110.880273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [110.886488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [110.886620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [110.921022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [110.921033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [110.921036] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [110.921040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [110.923395] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [110.925814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [110.929616] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [110.929749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [110.929888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [110.934371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [110.939247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [110.944498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [110.980001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [110.980009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [110.980012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [110.980015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [110.982358] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [110.984756] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [110.988605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [110.988735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [110.988867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [110.993443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [110.998316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [111.003210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [111.003488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [111.006856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [111.008202] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [111.008438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [111.008733] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [111.008881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [111.009056] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [113.944762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [113.945276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [113.945966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [113.946651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [113.947454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [113.948225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [113.948954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [113.949664] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [113.950394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [113.950646] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [113.950780] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [113.951083] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [113.951766] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [113.951923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [113.958103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [113.958200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [113.958469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [113.959392] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [113.990462] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [113.990472] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [113.990475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [113.990478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [113.992775] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [113.995205] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [113.999019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [113.999148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [113.999284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [114.003694] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [114.008581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [114.066202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [114.066789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [114.072766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [114.074154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [114.074434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [114.074717] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [114.074866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [114.075038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [119.173204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [119.173611] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [119.174347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [119.175128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [119.175873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [119.176693] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [119.177450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [119.178206] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [119.178864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [119.179135] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [119.179280] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [119.179529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [119.180246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [119.180380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [119.187791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [119.187887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [119.188171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [119.189096] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [119.219149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [119.219159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [119.219163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [119.219165] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [119.221463] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [119.223871] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [119.227673] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [119.227800] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [119.227935] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [119.232138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [119.237012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [119.290279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [119.291110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [119.296866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [119.298243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [119.298482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [119.298765] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [119.298903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [119.299088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [121.098339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [121.111236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [121.111643] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [121.112390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [121.113085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [121.113792] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [121.114576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [121.115334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [121.116025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [121.116765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [121.117303] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [121.117442] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [121.117787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [121.118512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [121.118649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [121.124785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [121.124878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [121.159412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [121.159422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [121.159425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [121.159428] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [121.161730] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [121.164159] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [121.168017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [121.168153] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [121.168289] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [121.172742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [121.177626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [121.182515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [121.218284] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [121.218290] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [121.218293] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [121.218296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [121.220632] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [121.223037] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [121.226969] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [121.227102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [121.227231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [121.232062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [121.236932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [121.241826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [121.242011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [121.245475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [121.246817] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [121.247056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [121.247354] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [121.247493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [121.247664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.403277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.403692] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.404426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.405350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.406075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [124.406880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [124.407631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [124.408362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [124.408998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.409260] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [124.409393] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.409650] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.410340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.410476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.417871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.417970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.418251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [124.419210] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [124.452377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [124.452388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [124.452391] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [124.452394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [124.454704] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [124.457117] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [124.460923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [124.461054] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [124.461210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [124.466145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [124.471023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [124.522478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.523113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.529057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.530501] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.531193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.531957] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.532545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.533117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [129.633121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [129.633622] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [129.634322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [129.635273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [129.637552] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [129.638622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [129.639111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [129.639388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [129.639633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [129.639916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [129.640100] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [129.640447] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [129.641213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [129.641428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [129.647699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [129.647824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.648092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [129.648989] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [129.681106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [129.681117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [129.681120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [129.681122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [129.683443] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [129.685896] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [129.689711] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [129.689840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [129.689976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [129.694887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [129.699733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [129.754593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.755232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [129.761173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [129.762548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [129.762796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [129.763079] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [129.763219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [129.763402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [131.338503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [131.350482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [131.350856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [131.351494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [131.352120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [131.352828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [131.353515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [131.354172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [131.354884] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [131.355532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [131.356494] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [131.356629] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [131.356920] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [131.357628] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [131.357769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [131.363910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [131.364001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [131.398303] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.398313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.398316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [131.398327] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [131.400622] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [131.403072] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [131.406857] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [131.406983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [131.407118] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [131.412431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [131.417290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [131.422182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [131.455967] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [131.455974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [131.455977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [131.455979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [131.458276] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [131.460684] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [131.464487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [131.464607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [131.464736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [131.468952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [131.473822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [131.478701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [131.478883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [131.482334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [131.483704] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [131.483958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [131.484242] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [131.484389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [131.484560] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.862621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.863034] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [134.863750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [134.864463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [134.865191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.865560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.865761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.865958] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.866138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [134.866392] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [134.866552] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [134.866827] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [134.867518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.867655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.875025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.875246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.875827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.877013] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [134.911385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [134.911396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [134.911399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [134.911669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [134.913993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [134.916442] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [134.920253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [134.920382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [134.920531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.924804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.929669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.986579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.986969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.992703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.994074] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [134.994310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [134.994604] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [134.994742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [134.994916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.034287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.034779] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [140.035436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [140.036183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [140.036976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [140.037724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [140.038431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [140.039190] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [140.039906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [140.040180] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [140.040312] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [140.040585] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [140.041277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.041410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.050050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.050149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.050416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [140.052930] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [140.084671] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [140.084681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [140.084684] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [140.084687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [140.086994] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [140.089384] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [140.093217] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [140.093345] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [140.093479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [140.098407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [140.103282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [140.162682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.163316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.169188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.170628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [140.171309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [140.172116] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [140.172697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [140.173273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.578826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [141.591724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.592126] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [141.592818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [141.593479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [141.594268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.595040] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.595783] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.596515] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.597207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [141.597931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [141.598138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [141.598395] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [141.599095] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.599232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.604246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.604338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.637556] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [141.637565] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [141.637568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [141.637571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [141.641098] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [141.643500] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [141.647283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [141.647614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [141.647750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [141.652650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [141.657509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [141.662402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [141.696435] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [141.696443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [141.696446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [141.696449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [141.698743] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [141.701147] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [141.704943] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [141.705064] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [141.705194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [141.709429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [141.714307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [141.719180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.719365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.723989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.725402] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [141.725703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [141.725988] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [141.726129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [141.726303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.199834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.200244] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.200964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.201667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.202394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.203167] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.203651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.203848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.204028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.204281] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.204416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.204678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.205367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.205500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.211669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.211780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.212045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.212795] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [145.245235] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.245245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.245248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.245251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.247547] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.249953] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.253731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.253858] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.253992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.258576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.263442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.314896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.315531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.321523] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.323014] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.323729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.324434] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.325004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.325647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [145.439295] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [145.439314] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [145.439321] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [150.426651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [150.427168] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [150.427864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [150.428856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [150.429895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [150.430969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [150.432018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [150.432286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [150.432531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [150.432835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [150.433032] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [150.433350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [150.434121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [150.434318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [150.441723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [150.441834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [150.442165] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [150.442271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [150.475420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [150.475430] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [150.475433] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [150.475436] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [150.478976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [150.481515] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [150.485356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [150.485544] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [150.485754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [150.491194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [150.496047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [150.547029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [150.547859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [150.553746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [150.555200] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [150.555947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [150.556700] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [150.557337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [150.557987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [151.819011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [151.830900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [151.831306] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [151.832042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [151.832849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [151.833643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.834490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.835304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.836036] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [151.836603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [151.836831] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [151.836968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [151.837220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [151.837928] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [151.838065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [151.844204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [151.844296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [151.879000] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [151.879009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [151.879012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [151.879015] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [151.881336] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [151.883767] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [151.887607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [151.887746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [151.887882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [151.892301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [151.897178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [151.902068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [151.936595] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [151.936602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [151.936605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [151.936608] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [151.938887] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [151.941297] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [151.945104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [151.945230] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [151.945364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [151.949996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [151.954888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [151.959775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [151.959927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [151.963389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [151.964747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [151.965012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [151.965305] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [151.965452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [151.965654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [155.644649] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [155.645618] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [155.649765] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [155.650103] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [155.650236] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [155.650378] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A]

<7> [155.650512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [155.650654] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [155.650805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [155.650951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [155.651088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [155.651222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [155.651355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [155.651488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [155.651621] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [155.651753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [155.651895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [155.652028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [155.652160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [155.652294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [155.652426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [155.652558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [155.652691] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [155.652833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [155.652965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [155.653096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [155.653228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [155.653360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [155.653492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [155.653624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [155.653755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [155.653928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [155.654061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [155.654192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [155.654323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [155.654455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [155.654588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [155.654720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [155.654863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [155.654996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [155.655129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [155.655262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [155.655393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [155.655526] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [155.655687] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [155.655832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [155.655967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [155.656098] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [155.656228] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [155.656358] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [155.656492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [155.656624] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [155.656772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [155.656926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [155.657062] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [155.657211] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [155.657363] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [155.657499] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [155.657637] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [155.657777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [155.658027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [155.658166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [155.658303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [155.658437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [155.658572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [155.658704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [155.658864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [155.658998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [155.659129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [155.659262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [155.659394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [155.659526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [155.659660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [155.659835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [155.659968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [155.660101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [155.660234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [155.660366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [155.660498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [155.660631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [155.660763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [155.660910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [155.661042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [155.661174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [155.661307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [155.661439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [155.661571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [155.661702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [155.661847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.661980] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.662111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.662243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [155.662374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [155.662506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.662642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.662774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [155.662919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [155.663051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [155.663185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [155.663317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [155.663451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [155.663582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [155.663713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [155.663855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [155.663993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [155.676100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.676225] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.676394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.676583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.676851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.677090] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.677295] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.677494] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.677675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.677931] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.678067] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.678571] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.679286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.679425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.689250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.689650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.689792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [155.690572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.692172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [155.692311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [155.692447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [155.692582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [155.692716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [155.692882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [155.693061] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [155.693291] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [155.693429] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [155.693681] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output

<7> [155.698486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [155.698664] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [155.699464] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [155.699618] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [155.718930] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [155.719206] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [155.720273] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [155.720309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [155.737874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [155.738116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.738264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.749965] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.749980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.749983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.749987] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.752293] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.754703] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.758506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.758628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.758764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [155.763229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [155.763483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [155.775698] Console: switching to colour frame buffer device 240x67

<7> [155.775663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [155.779912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress