igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	54.59 seconds
Hostname	shard-rkl-8
Igt-Version	IGT-Version: 2.4-ga5c5d6558 (x86_64) (Linux: 7.0.0-CI_DRM_18364-g6784fa94a98a+ x86_64)
Out	Using IGT_SRANDOM=1777067897 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881172a5828 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.406s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.180s) Subtest gem-execbuf-stress: SUCCESS (54.591s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.406s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.180s) Subtest gem-execbuf-stress: SUCCESS (54.591s)
Dmesg	<6> [134.284404] Console: switching to colour dummy device 80x25 <6> [134.284584] [IGT] i915_pm_rpm: executing <7> [134.286607] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [134.287056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [134.287067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.287061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.287224] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.287371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.316925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [134.316934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [134.316943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [134.316946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [134.319248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [134.321662] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [134.325449] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [134.325577] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [134.326064] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [134.326071] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [134.326076] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [134.326082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [134.326086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [134.326089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [134.326092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [134.326095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [134.326098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [134.326101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [134.326104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [134.326107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [134.326110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [134.326112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [134.326115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [134.326118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [134.326121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [134.326124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [134.326127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [134.326130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.326133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.326135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.326138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [134.326141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [134.326144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [134.326147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [134.326149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [134.326152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [134.326155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [134.326158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [134.326161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [134.326164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.326166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.326169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.326172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [134.326222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [134.326226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.330406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [134.330440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [134.330443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.334645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [134.334678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [134.334681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.338886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [134.342710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [134.342716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.346942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [134.347192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [134.347196] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.351407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [134.351649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [134.351652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.355826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [134.356123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [134.356127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.385601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [134.385609] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [134.385613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [134.385616] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [134.387926] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [134.390347] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [134.394160] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [134.394286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [134.394743] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [134.394749] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [134.394754] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [134.394760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [134.394763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [134.394766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [134.394769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [134.394772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [134.394775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [134.394778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [134.394781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [134.394784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [134.394786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [134.394789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [134.394792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [134.394795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [134.394798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [134.394800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [134.394803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [134.394806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.394809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.394812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [134.394814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [134.394817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [134.394820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [134.394823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [134.394825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [134.394828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [134.394831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [134.394834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [134.394837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [134.394839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.394842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.394845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [134.394848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [134.394870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [134.394873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.399084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [134.399097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [134.399100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.403269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [134.403281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [134.403284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.407481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [134.407686] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:415] <7> [135.424056] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [135.424315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [135.424719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [135.424866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [135.425024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [135.425167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [135.425311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [135.425464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [135.425597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [135.425728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [135.425860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [135.426000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [135.426132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [135.426264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [135.426395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [135.426526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [135.426657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [135.426789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [135.426920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [135.427066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [135.427197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [135.427327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [135.427457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [135.427588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [135.427719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [135.427854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [135.427996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [135.428127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [135.428258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [135.428388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [135.428518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [135.428647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [135.428777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [135.428906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [135.429050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [135.429179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [135.429309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [135.429437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [135.429566] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [135.429696] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [135.429848] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [135.429992] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [135.430141] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [135.430270] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [135.430398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [135.430527] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [135.430655] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [135.430781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [135.430926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [135.431073] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [135.431206] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [135.431352] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [135.431498] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [135.431633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [135.431767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [135.431899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [135.432041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [135.432171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [135.432300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [135.432429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [135.432599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.432736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.433644] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [135.454124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [135.454519] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output <7> [135.459536] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [135.459973] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [135.460432] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [135.460878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [135.461363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [135.461773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [135.462131] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [135.462437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [135.462739] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [135.463063] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.463503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.463900] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [135.464738] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [135.465010] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [135.567420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.568125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.568712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.570486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.572359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.577306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.578696] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.579068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.579369] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.579507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.579943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [135.668627] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [135.669866] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [135.670434] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [135.685270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.686014] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.686638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.687309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.687992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.688663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.689359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.690047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.690704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.692194] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.692772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.694338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.696519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.697123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.709759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.710097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.710252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.722400] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [135.744369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.744383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.744389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.744394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.746714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.749282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.753103] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.753253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.753408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.758267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.763140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [135.768101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.769132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.770573] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [135.770688] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [135.823523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.824265] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.824882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.826667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.827426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.834501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.835987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.837309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.838147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.838677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.839239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.884113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.884497] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.885134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.885757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.886476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.887162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.887863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.888599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.889263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.890838] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.891459] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.892578] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.894726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.895344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.908020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.908448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.908959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.911720] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [135.941867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.941878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.941881] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.941885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.944185] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.946589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.950389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.950522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.950659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.955568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.960416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.023371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.024105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.029981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.031363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.031617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.031899] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.032049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.032220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.057133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.057513] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.058168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.058787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.059500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.060195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.060844] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.061542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.062185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.063524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.064107] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.065278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.067431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.068021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.077074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.077288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.077827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.079314] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.112233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.112244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.112247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.112251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.114554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.116989] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.120779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.120910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.121058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.126004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.130875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.191346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.191571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.198462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.200323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.201109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.202058] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.202873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.203629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.327670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.328132] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.328738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.329407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.330096] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.330762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.331448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.332113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.332737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.333444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.333733] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.334003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.334684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.334818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.342223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.342325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.342661] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.342775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.378125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.378135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.378139] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.378142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.381607] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.384035] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.387877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.388016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.388150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.393147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.398039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.455300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.455520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.462422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.464258] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.465075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.466016] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.466824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.467595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.592428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.592809] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.593484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.594134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.594806] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.595393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.595591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.595786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.595968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.596218] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.596351] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.596605] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.597288] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.597422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.603647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.603746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.604196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.606633] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.637563] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.637574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.637578] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.637581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.639878] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.642294] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.646086] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.646216] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.646351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.650639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.655515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.727413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.728155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.734028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.735389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.735643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.735926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.736094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.736335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.834152] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.834530] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.835183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.835803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.836518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.837211] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.837899] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.838634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.839277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.840036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.840653] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.840906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.841592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.841725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.849107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.849250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.849707] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.849866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.885582] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.885592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.885596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.885599] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.887904] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.890326] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.894134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.894267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.894403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.899003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.903875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.967144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.967836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.975034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.976757] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.977532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.978627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.979478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.980255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.078893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.079387] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.080025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.080650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.081386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.082083] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.082821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.083562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.084224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.084598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.084730] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.084964] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.085645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.085778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.091947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.092115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.092554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.093704] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.125835] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.125845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.125849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.125852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.128155] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.130744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.134538] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.134669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.134804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.139550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.144442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.231289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.232090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.238271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.239641] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.239959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.240243] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.240381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.240552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.341867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.342348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.342976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.343602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.344304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.344998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.345697] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.346412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.347044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.347718] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.347850] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.348225] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.348901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.349047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.356445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.356645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.357164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.360364] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.390431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.390441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.390445] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.390448] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.392762] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.395166] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.399002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.399131] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.399265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.403764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.408636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.471360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.471716] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.478644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.480173] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.480893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.481706] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.482302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.482920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.512868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.513353] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.513982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.514610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.515316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.516012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.516727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.517466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.518096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.518758] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.519363] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.520083] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.522264] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.522875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.533238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.533467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.534068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.538170] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.581133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.581143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.581147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.581150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.586447] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.591687] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.598194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.598322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.598456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.603089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.607953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.639246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.639452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.645082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.646469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.646707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.647000] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.647138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.647310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.752136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.752521] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.753196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.754096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.755061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.755726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.756422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.757085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.757645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.757885] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.758036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.758281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.758969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.759102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.765260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.765417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.765816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.766661] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.801294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.801306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.801309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.801313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.803613] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.806030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.809825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.809960] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.810095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.814677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.819570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.879358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.880123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.887261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.889105] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.889904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.890825] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.891742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.892577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.923784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.924249] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.924852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.925531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.926232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.926902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.927602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.928316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.929014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.929385] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.929518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.929808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.930493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.930626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.936759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.936856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.937669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.938864] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.970670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.970681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.970684] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.970688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.973012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.975432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.979228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.979355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.979490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.985525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.990468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [138.047207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.047900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.053922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.055278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [138.055539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [138.055833] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [138.055988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [138.056167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [138.076770] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [138.078083] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [138.078540] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [138.093078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.093374] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [138.093861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [138.094349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [138.094816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.095316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.095766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.096239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.096671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [138.097294] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [138.097539] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [138.098098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [138.099193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.099447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.108202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.108367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.108955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [138.117016] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [138.141749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [138.141760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [138.141763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [138.141767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [138.144061] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [138.146455] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [138.150250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [138.150379] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [138.150518] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [138.155557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [138.160428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [138.165379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.166435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.167863] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [138.167985] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [138.223261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.223646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.224155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.225967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.226745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.233973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.235470] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [138.236189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [138.237134] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [138.237720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [138.238389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.281129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.281514] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [138.282169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [138.282790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [138.283502] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.284213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.284916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.285618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [138.286308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [138.287060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [138.287616] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [138.288409] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [138.290633] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.291221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.301483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.301659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.301959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [138.306693] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [138.336251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [138.336261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [138.336265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [138.336268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [138.338564] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [138.340982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [138.344780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [138.344910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [138.345059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [138.349974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [138.354851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [138.423395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.424140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.431213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.432784] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [138.433553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [138.434502] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [138.435144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [138.435757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.552102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.552484] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.553151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.553792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.554540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.555240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.555894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.556586] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.557233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.557873] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [143.558038] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.558296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.558984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.559117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.565290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.565386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.565656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [143.566782] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [143.597846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [143.597857] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [143.597861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [143.597864] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [143.600162] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [143.602570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [143.606367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [143.606497] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [143.606632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [143.610854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [143.615727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [143.671437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.672188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.679232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.680662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.680909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.681220] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.681359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.681537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.984877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.997258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.997927] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.998600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.999263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.999941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.000673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.001372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.002044] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.002690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.003174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.003309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.003713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.004428] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.004566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.014382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.014518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.061891] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.061902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.061906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.061911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.067210] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.072501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.079044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.079186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.079322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.083932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.088814] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.093933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [146.138376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.138385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.138389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [146.138392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [146.143653] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [146.148925] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [146.155425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [146.155545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [146.155672] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [146.160315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [146.165187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [146.170064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.170368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.173684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.175037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.175274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.175559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.175697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.175868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [148.721735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [148.722179] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [148.722777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [148.723443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [148.724131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [148.724796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [148.725261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [148.725456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [148.725633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [148.725883] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [148.726022] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [148.726270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [148.726949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [148.727092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [148.733240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [148.733339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [148.733611] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [148.735474] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [148.767991] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [148.768002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [148.768005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [148.768009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [148.770317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [148.772768] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [148.776563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [148.776694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [148.776829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [148.781420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [148.786279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [148.847370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [148.847563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [148.854382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [148.855780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [148.856207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [148.856541] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [148.856679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [148.856851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [153.887066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [153.887550] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [153.888184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [153.888805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [153.889511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.890197] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.890845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.891525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [153.892165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [153.892839] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [153.892971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [153.893313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [153.893988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [153.894129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [153.900312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [153.900411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [153.900677] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [153.901971] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [153.934921] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [153.934932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [153.934936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [153.934939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [153.937232] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [153.939644] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [153.943438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [153.943567] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [153.943705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [153.948372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [153.953261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [154.015570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [154.016211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [154.022199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.023554] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [154.024011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [154.024358] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [154.024495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [154.024674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [156.224910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [156.237364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.237752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.238412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.239121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.239888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.240676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.241364] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.242113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.242383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.242623] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [156.242755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.243185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.243915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.244057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.252672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.252766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.298536] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.298547] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.298550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.298554] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.302574] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.307817] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.314290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.314414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.314546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [156.319161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [156.324030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [156.328949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [156.374719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.374727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.374731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [156.374734] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [156.378744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [156.384022] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [156.390480] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [156.390598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [156.390724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [156.395357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [156.400233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [156.405133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [156.405297] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [156.408766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.410104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [156.410383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [156.410696] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [156.410840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [156.411011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [159.056402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.056780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [159.057445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [159.058077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.058823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.059547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.060119] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.060339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.060517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [159.061017] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [159.061156] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [159.061463] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [159.062153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.062305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.068507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.068605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.068879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [159.070402] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [159.101866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [159.101877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [159.101880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [159.101884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [159.104237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [159.106637] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [159.110438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [159.110568] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [159.110702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [159.115661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [159.120533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [159.175608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.175938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.181599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.183007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [159.183315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [159.183623] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [159.183764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [159.183937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [164.217378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [164.217764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [164.218404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [164.219079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [164.219861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.220653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.221361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.222021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [164.222706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [164.223191] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [164.223338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [164.223599] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [164.224283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [164.224426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [164.234266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [164.234496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [164.234928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [164.236610] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [164.270689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [164.270700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [164.270703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [164.270707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [164.273002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [164.275456] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [164.279260] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [164.279398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [164.279535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [164.284438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [164.289320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [164.343761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [164.344506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [164.350358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [164.351735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [164.351975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [164.352257] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [164.352408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [164.352578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [166.463571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [166.475520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [166.475939] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [166.476599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [166.477230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [166.477966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [166.478761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [166.479505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [166.480161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [166.480836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [166.481465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [166.481599] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [166.481889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [166.482604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [166.482747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [166.488889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [166.488978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [166.534750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [166.534760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [166.534764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [166.534767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [166.538772] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [166.544012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [166.550485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [166.550613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [166.550747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [166.556533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [166.561455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [166.566351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [166.612051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [166.612059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [166.612062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [166.612066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [166.616083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [166.621301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [166.627759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [166.627876] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [166.628003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [166.632656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [166.637524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [166.642406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [166.642555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [166.646032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [166.647381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [166.647633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [166.647922] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [166.648061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [166.648241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [169.386216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [169.386727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [169.387329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [169.388009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [169.388707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [169.389445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [169.390133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [169.390816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [169.391451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [169.392099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [169.392232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [169.392545] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [169.393220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [169.393360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [169.399523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [169.399618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.399889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [169.404628] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [169.433380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [169.433390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [169.433394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [169.433397] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [169.435692] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [169.438082] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [169.441867] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [169.441994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [169.442129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [169.446456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [169.451321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [169.511739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.512482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [169.518336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [169.519754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [169.519991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [169.520275] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [169.520426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [169.520616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [174.618231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [174.618690] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [174.619292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [174.619978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [174.620673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [174.621338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [174.622099] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [174.622834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [174.623526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [174.624184] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [174.624316] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [174.624713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [174.626019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [174.626153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [174.633543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [174.633754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [174.634335] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [174.634539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [174.665898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [174.665908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [174.665912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [174.665916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [174.668205] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [174.670643] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [174.674457] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [174.674587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [174.674722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [174.679769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [174.684653] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [174.751706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [174.752465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [174.758399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [174.759755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [174.759998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [174.760291] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [174.760440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [174.760620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [176.703687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [176.715630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [176.716051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [176.716759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [176.717387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [176.718109] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [176.718873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [176.719594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [176.720242] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [176.720973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [176.721706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [176.721838] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [176.722088] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [176.722780] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [176.722913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [176.729046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [176.729135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [176.762708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [176.762718] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [176.762721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [176.762725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [176.765012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [176.767400] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [176.771180] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [176.771303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [176.771442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [176.776437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [176.781305] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [176.786191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [176.821102] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [176.821110] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [176.821114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [176.821117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [176.823398] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [176.825799] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [176.829609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [176.829733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [176.829866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [176.834141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [176.839032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [176.843911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [176.844077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [176.847521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [176.848896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [176.849191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [176.849491] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [176.849636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [176.849809] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [179.861406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [179.861882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [179.862508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [179.863128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [179.863860] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [179.864611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [179.865257] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [179.865938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [179.866152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [179.866402] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [179.866547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [179.866793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [179.867475] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [179.867607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [179.874978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [179.875074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [179.875339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [179.879043] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [179.907195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [179.907206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [179.907210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [179.907213] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [179.909508] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [179.911895] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [179.915680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [179.915813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [179.915947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [179.920620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [179.925493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [179.991741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.992257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.999304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [180.000714] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [180.000949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [180.001232] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [180.001405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [180.001695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.028607] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.028994] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [185.029639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [185.030344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [185.031076] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.031848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.032578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.033328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.033995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [185.034373] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [185.034519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [185.034789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [185.035464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.035626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.043055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.043152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.043531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [185.045592] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [185.076497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.076516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.076520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [185.076523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [185.079834] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [185.082237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [185.086031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [185.086159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [185.086296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [185.091106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [185.095959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [185.159945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.160697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.167817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.169666] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [185.170678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [185.171752] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [185.172578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [185.173465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.943803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [186.956651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.957030] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [186.957672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [186.958377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [186.959132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [186.960027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [186.960776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [186.961565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [186.962257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [186.962837] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [186.962970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [186.963223] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [186.963914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.964047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.970180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.970271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.004695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [187.004705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [187.004709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [187.004713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [187.008156] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [187.010570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [187.014365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [187.014493] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [187.014639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [187.019756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [187.024632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [187.029768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [187.063142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [187.063151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [187.063154] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [187.063157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [187.065440] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [187.067846] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [187.071645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [187.071770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [187.071901] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [187.076566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [187.081432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [187.086314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.086499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.089947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.091293] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [187.091653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [187.091976] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [187.092114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [187.092287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [190.259199] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [190.260476] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [190.264233] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [190.264411] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [190.264559] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [190.264729] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A] <7> [190.264860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [190.264996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [190.265130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [190.265263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [190.265398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [190.265534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [190.265681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [190.265814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [190.265946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [190.266076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [190.266206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [190.266336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [190.266466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [190.266604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [190.266734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [190.266862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [190.266991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [190.267121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [190.267250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [190.267379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [190.267508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [190.267662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [190.267791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [190.267919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [190.268047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [190.268176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [190.268304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [190.268432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [190.268567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [190.268696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [190.268825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [190.268953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [190.269081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [190.269210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [190.269339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [190.269467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [190.269608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [190.269737] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [190.269892] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [190.270024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [190.270157] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [190.270287] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [190.270416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [190.270551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [190.270681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [190.270812] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [190.270959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [190.271095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [190.271227] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [190.271374] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [190.271521] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [190.271668] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [190.271804] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [190.271942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [190.272075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [190.272208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [190.272340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [190.272471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [190.272611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [190.272742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [190.272873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [190.273004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [190.273135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [190.273265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [190.273395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [190.273526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [190.273783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [190.273914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [190.274046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [190.274176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [190.274306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [190.274437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [190.274598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [190.274728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [190.274856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [190.274985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [190.275114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [190.275243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [190.275372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [190.275502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [190.275641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [190.275769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [190.275898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [190.276412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [190.276546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [190.276932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [190.277060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [190.277191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [190.277319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [190.277447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [190.277588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [190.277717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [190.277844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [190.277973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [190.289792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.289882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [190.290028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [190.290208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [190.290435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.290652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.290852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.291049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [190.291228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [190.291672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [190.291806] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [190.292137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [190.292836] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.292974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.300337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.300705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.300936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.301665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.303069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [190.303208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [190.303344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [190.303479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [190.303624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [190.303758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [190.303934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [190.304156] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [190.304294] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [190.304476] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output <7> [190.309290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [190.309469] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [190.310277] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [190.310416] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [190.329748] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [190.330147] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [190.331938] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [190.332114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [190.332813] [IGT] i915_pm_rpm: exiting, ret=0 <7> [190.349627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.349976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.350145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.362006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [190.362019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [190.362022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [190.362026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [190.364355] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [190.366770] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [190.370576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [190.370711] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [190.370848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [190.375319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.375528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [190.386481] Console: switching to colour frame buffer device 240x67 <7> [190.386418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [190.390700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.287056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [134.287067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.287061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.287224] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.287371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.316925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [134.316934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [134.316943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [134.316946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [134.319248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [134.321662] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [134.325449] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [134.325577] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [134.326064] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [134.326071] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [134.326076] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [134.326082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [134.326086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [134.326089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [134.326092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [134.326095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [134.326098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [134.326101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [134.326104] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [134.326107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [134.326110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [134.326112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [134.326115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [134.326118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [134.326121] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [134.326124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [134.326127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [134.326130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.326133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.326135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.326138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [134.326141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [134.326144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [134.326147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [134.326149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [134.326152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [134.326155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [134.326158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [134.326161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [134.326164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.326166] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.326169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.326172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [134.326222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [134.326226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.330406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [134.330440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [134.330443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.334645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [134.334678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [134.334681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.338886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [134.342710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [134.342716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.346942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [134.347192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [134.347196] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.351407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [134.351649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [134.351652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.355826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [134.356123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [134.356127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.385601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [134.385609] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [134.385613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [134.385616] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [134.387926] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [134.390347] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [134.394160] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [134.394286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [134.394743] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [134.394749] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [134.394754] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [134.394760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [134.394763] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [134.394766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [134.394769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [134.394772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [134.394775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [134.394778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [134.394781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [134.394784] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [134.394786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [134.394789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [134.394792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [134.394795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [134.394798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [134.394800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [134.394803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [134.394806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.394809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.394812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [134.394814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [134.394817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [134.394820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [134.394823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [134.394825] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [134.394828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [134.394831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [134.394834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [134.394837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [134.394839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.394842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.394845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [134.394848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [134.394870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [134.394873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.399084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [134.399097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [134.399100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.403269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [134.403281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [134.403284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.407481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [135.424056] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [135.424315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [135.424719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [135.424866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [135.425024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [135.425167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [135.425311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [135.425464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [135.425597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [135.425728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [135.425860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [135.426000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [135.426132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [135.426264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [135.426395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [135.426526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [135.426657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [135.426789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [135.426920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [135.427066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [135.427197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [135.427327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [135.427457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [135.427588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [135.427719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [135.427854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [135.427996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [135.428127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [135.428258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [135.428388] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [135.428518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [135.428647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [135.428777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [135.428906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [135.429050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [135.429179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [135.429309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [135.429437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [135.429566] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [135.429696] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [135.429848] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [135.429992] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [135.430141] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [135.430270] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [135.430398] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [135.430527] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [135.430655] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [135.430781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [135.430926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [135.431073] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [135.431206] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [135.431352] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [135.431498] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [135.431633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [135.431767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [135.431899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [135.432041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [135.432171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [135.432300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [135.432429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [135.432599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.432736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.433644] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [135.454124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [135.454519] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output

<7> [135.459536] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [135.459973] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [135.460432] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [135.460878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [135.461363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [135.461773] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [135.462131] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [135.462437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [135.462739] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [135.463063] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.463503] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.463900] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [135.464738] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [135.465010] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [135.567420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.568125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.568712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.570486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.572359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.577306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.578696] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.579068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.579369] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.579507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.579943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [135.668627] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [135.685270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.686014] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.686638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.687309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.687992] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.688663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.689359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.690047] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.690704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.692194] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.692772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.694338] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.696519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.697123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.709759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.710097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.710252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.722400] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [135.744369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.744383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.744389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.744394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.746714] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.749282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.753103] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.753253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.753408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.758267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.763140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [135.768101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.769132] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.770573] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [135.770688] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [135.823523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.824265] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.824882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.826667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.827426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.834501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.835987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.837309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.838147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.838677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.839239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.884113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.884497] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.885134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.885757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.886476] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.887162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.887863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.888599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.889263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.890838] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.891459] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.892578] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.894726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.895344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.908020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.908448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.908959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.911720] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [135.941867] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.941878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.941881] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.941885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.944185] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.946589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.950389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.950522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.950659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.955568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.960416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.023371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.024105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.029981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.031363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.031617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.031899] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.032049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.032220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.057133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.057513] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.058168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.058787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.059500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.060195] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.060844] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.061542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.062185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.063524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.064107] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.065278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.067431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.068021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.077074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.077288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.077827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.079314] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.112233] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.112244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.112247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.112251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.114554] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.116989] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.120779] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.120910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.121058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.126004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.130875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.191346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.191571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.198462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.200323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.201109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.202058] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.202873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.203629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.327670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.328132] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.328738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.329407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.330096] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.330762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.331448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.332113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.332737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.333444] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.333733] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.334003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.334684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.334818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.342223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.342325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.342661] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.342775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.378125] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.378135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.378139] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.378142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.381607] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.384035] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.387877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.388016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.388150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.393147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.398039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.455300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.455520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.462422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.464258] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.465075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.466016] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.466824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.467595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.592428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.592809] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.593484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.594134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.594806] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.595393] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.595591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.595786] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.595968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.596218] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.596351] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.596605] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.597288] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.597422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.603647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.603746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.604196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.606633] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.637563] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.637574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.637578] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.637581] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.639878] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.642294] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.646086] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.646216] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.646351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.650639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.655515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.727413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.728155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.734028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.735389] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.735643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.735926] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.736094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.736335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.834152] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.834530] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.835183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.835803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.836518] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.837211] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.837899] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.838634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.839277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.840036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.840653] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.840906] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.841592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.841725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.849107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.849250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.849707] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.849866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.885582] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.885592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.885596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.885599] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.887904] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.890326] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.894134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.894267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.894403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.899003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.903875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.967144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.967836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.975034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.976757] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.977532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.978627] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.979478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.980255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.078893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.079387] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.080025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.080650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.081386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.082083] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.082821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.083562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.084224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.084598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.084730] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.084964] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.085645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.085778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.091947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.092115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.092554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.093704] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.125835] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.125845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.125849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.125852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.128155] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.130744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.134538] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.134669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.134804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.139550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.144442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.231289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.232090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.238271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.239641] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.239959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.240243] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.240381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.240552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.341867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.342348] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.342976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.343602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.344304] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.344998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.345697] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.346412] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.347044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.347718] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.347850] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.348225] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.348901] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.349047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.356445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.356645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.357164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.360364] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.390431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.390441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.390445] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.390448] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.392762] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.395166] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.399002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.399131] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.399265] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.403764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.408636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.471360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.471716] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.478644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.480173] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.480893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.481706] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.482302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.482920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.512868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.513353] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.513982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.514610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.515316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.516012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.516727] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.517466] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.518096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.518758] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.519363] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.520083] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.522264] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.522875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.533238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.533467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.534068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.538170] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.581133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.581143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.581147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.581150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.586447] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.591687] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.598194] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.598322] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.598456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.603089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.607953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.639246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.639452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.645082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.646469] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.646707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.647000] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.647138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.647310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.752136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.752521] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.753196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.754096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.755061] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.755726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.756422] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.757085] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.757645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.757885] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.758036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.758281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.758969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.759102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.765260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.765417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.765816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.766661] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.801294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.801306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.801309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.801313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.803613] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.806030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.809825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.809960] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.810095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.814677] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.819570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.879358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.880123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.887261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.889105] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.889904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.890825] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.891742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.892577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.923784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.924249] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.924852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.925531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.926232] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.926902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.927602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.928316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.929014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.929385] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.929518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.929808] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.930493] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.930626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.936759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.936856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.937669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.938864] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.970670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.970681] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.970684] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.970688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.973012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.975432] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.979228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.979355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.979490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.985525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.990468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [138.047207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.047900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.053922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.055278] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [138.055539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [138.055833] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [138.055988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [138.056167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [138.078083] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [138.093078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.093374] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [138.093861] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [138.094349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [138.094816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.095316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.095766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.096239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.096671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [138.097294] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [138.097539] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [138.098098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [138.099193] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.099447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.108202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.108367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.108955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [138.117016] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [138.141749] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [138.141760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [138.141763] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [138.141767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [138.144061] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [138.146455] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [138.150250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [138.150379] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [138.150518] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [138.155557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [138.160428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [138.165379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.166435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.167863] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [138.167985] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [138.223261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.223646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.224155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.225967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.226745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.233973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.235470] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [138.236189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [138.237134] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [138.237720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [138.238389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.281129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.281514] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [138.282169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [138.282790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [138.283502] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.284213] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.284916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.285618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [138.286308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [138.287060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [138.287616] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [138.288409] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [138.290633] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.291221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.301483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.301659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.301959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [138.306693] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [138.336251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [138.336261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [138.336265] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [138.336268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [138.338564] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [138.340982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [138.344780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [138.344910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [138.345059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [138.349974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [138.354851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [138.423395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.424140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.431213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.432784] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [138.433553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [138.434502] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [138.435144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [138.435757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.552102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.552484] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.553151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.553792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.554540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.555240] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.555894] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.556586] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.557233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.557873] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [143.558038] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.558296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.558984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.559117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.565290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.565386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.565656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [143.566782] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [143.597846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [143.597857] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [143.597861] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [143.597864] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [143.600162] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [143.602570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [143.606367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [143.606497] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [143.606632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [143.610854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [143.615727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [143.671437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.672188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.679232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.680662] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.680909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.681220] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.681359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.681537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.984877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.997258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.997927] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.998600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.999263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.999941] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.000673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.001372] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.002044] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.002690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.003174] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.003309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.003713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.004428] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.004566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.014382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.014518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.061891] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.061902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.061906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.061911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.067210] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.072501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.079044] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.079186] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.079322] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.083932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.088814] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.093933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [146.138376] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.138385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.138389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [146.138392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [146.143653] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [146.148925] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [146.155425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [146.155545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [146.155672] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [146.160315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [146.165187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [146.170064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.170368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.173684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.175037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.175274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.175559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.175697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.175868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [148.721735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [148.722179] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [148.722777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [148.723443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [148.724131] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [148.724796] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [148.725261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [148.725456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [148.725633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [148.725883] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [148.726022] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [148.726270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [148.726949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [148.727092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [148.733240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [148.733339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [148.733611] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [148.735474] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [148.767991] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [148.768002] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [148.768005] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [148.768009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [148.770317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [148.772768] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [148.776563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [148.776694] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [148.776829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [148.781420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [148.786279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [148.847370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [148.847563] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [148.854382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [148.855780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [148.856207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [148.856541] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [148.856679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [148.856851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [153.887066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [153.887550] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [153.888184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [153.888805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [153.889511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.890197] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.890845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.891525] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [153.892165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [153.892839] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [153.892971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [153.893313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [153.893988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [153.894129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [153.900312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [153.900411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [153.900677] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [153.901971] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [153.934921] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [153.934932] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [153.934936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [153.934939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [153.937232] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [153.939644] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [153.943438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [153.943567] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [153.943705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [153.948372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [153.953261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [154.015570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [154.016211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [154.022199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.023554] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [154.024011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [154.024358] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [154.024495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [154.024674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [156.224910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [156.237364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.237752] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.238412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.239121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.239888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.240676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.241364] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.242113] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.242383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.242623] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [156.242755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.243185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.243915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.244057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.252672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.252766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.298536] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.298547] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.298550] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.298554] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.302574] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.307817] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.314290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.314414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.314546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [156.319161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [156.324030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [156.328949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [156.374719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.374727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.374731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [156.374734] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [156.378744] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [156.384022] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [156.390480] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [156.390598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [156.390724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [156.395357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [156.400233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [156.405133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [156.405297] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [156.408766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.410104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [156.410383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [156.410696] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [156.410840] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [156.411011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [159.056402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.056780] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [159.057445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [159.058077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.058823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.059547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.060119] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.060339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.060517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [159.061017] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [159.061156] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [159.061463] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [159.062153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.062305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.068507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.068605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.068879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [159.070402] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [159.101866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [159.101877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [159.101880] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [159.101884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [159.104237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [159.106637] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [159.110438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [159.110568] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [159.110702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [159.115661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [159.120533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [159.175608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.175938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.181599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.183007] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [159.183315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [159.183623] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [159.183764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [159.183937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [164.217378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [164.217764] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [164.218404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [164.219079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [164.219861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.220653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.221361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.222021] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [164.222706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [164.223191] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [164.223338] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [164.223599] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [164.224283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [164.224426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [164.234266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [164.234496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [164.234928] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [164.236610] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [164.270689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [164.270700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [164.270703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [164.270707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [164.273002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [164.275456] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [164.279260] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [164.279398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [164.279535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [164.284438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [164.289320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [164.343761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [164.344506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [164.350358] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [164.351735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [164.351975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [164.352257] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [164.352408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [164.352578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [166.463571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [166.475520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [166.475939] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [166.476599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [166.477230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [166.477966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [166.478761] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [166.479505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [166.480161] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [166.480836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [166.481465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [166.481599] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [166.481889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [166.482604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [166.482747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [166.488889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [166.488978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [166.534750] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [166.534760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [166.534764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [166.534767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [166.538772] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [166.544012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [166.550485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [166.550613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [166.550747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [166.556533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [166.561455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [166.566351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [166.612051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [166.612059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [166.612062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [166.612066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [166.616083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [166.621301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [166.627759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [166.627876] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [166.628003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [166.632656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [166.637524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [166.642406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [166.642555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [166.646032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [166.647381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [166.647633] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [166.647922] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [166.648061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [166.648241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [169.386216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [169.386727] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [169.387329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [169.388009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [169.388707] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [169.389445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [169.390133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [169.390816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [169.391451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [169.392099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [169.392232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [169.392545] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [169.393220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [169.393360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [169.399523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [169.399618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [169.399889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [169.404628] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [169.433380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [169.433390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [169.433394] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [169.433397] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [169.435692] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [169.438082] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [169.441867] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [169.441994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [169.442129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [169.446456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [169.451321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [169.511739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [169.512482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [169.518336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [169.519754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [169.519991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [169.520275] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [169.520426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [169.520616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [174.618231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [174.618690] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [174.619292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [174.619978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [174.620673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [174.621338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [174.622099] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [174.622834] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [174.623526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [174.624184] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [174.624316] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [174.624713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [174.626019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [174.626153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [174.633543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [174.633754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [174.634335] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [174.634539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [174.665898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [174.665908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [174.665912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [174.665916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [174.668205] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [174.670643] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [174.674457] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [174.674587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [174.674722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [174.679769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [174.684653] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [174.751706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [174.752465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [174.758399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [174.759755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [174.759998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [174.760291] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [174.760440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [174.760620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [176.703687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [176.715630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [176.716051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [176.716759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [176.717387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [176.718109] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [176.718873] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [176.719594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [176.720242] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [176.720973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [176.721706] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [176.721838] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [176.722088] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [176.722780] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [176.722913] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [176.729046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [176.729135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [176.762708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [176.762718] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [176.762721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [176.762725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [176.765012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [176.767400] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [176.771180] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [176.771303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [176.771442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [176.776437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [176.781305] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [176.786191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [176.821102] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [176.821110] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [176.821114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [176.821117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [176.823398] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [176.825799] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [176.829609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [176.829733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [176.829866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [176.834141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [176.839032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [176.843911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [176.844077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [176.847521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [176.848896] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [176.849191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [176.849491] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [176.849636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [176.849809] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [179.861406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [179.861882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [179.862508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [179.863128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [179.863860] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [179.864611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [179.865257] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [179.865938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [179.866152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [179.866402] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [179.866547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [179.866793] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [179.867475] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [179.867607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [179.874978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [179.875074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [179.875339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [179.879043] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [179.907195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [179.907206] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [179.907210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [179.907213] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [179.909508] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [179.911895] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [179.915680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [179.915813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [179.915947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [179.920620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [179.925493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [179.991741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [179.992257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [179.999304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [180.000714] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [180.000949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [180.001232] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [180.001405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [180.001695] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [185.028607] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [185.028994] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [185.029639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [185.030344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [185.031076] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.031848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.032578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.033328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.033995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [185.034373] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [185.034519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [185.034789] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [185.035464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.035626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.043055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [185.043152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.043531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [185.045592] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [185.076497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.076516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.076520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [185.076523] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [185.079834] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [185.082237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [185.086031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [185.086159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [185.086296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [185.091106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [185.095959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [185.159945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [185.160697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [185.167817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [185.169666] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [185.170678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [185.171752] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [185.172578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [185.173465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [186.943803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [186.956651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [186.957030] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [186.957672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [186.958377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [186.959132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [186.960027] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [186.960776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [186.961565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [186.962257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [186.962837] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [186.962970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [186.963223] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [186.963914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [186.964047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [186.970180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [186.970271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.004695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [187.004705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [187.004709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [187.004713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [187.008156] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [187.010570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [187.014365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [187.014493] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [187.014639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [187.019756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [187.024632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.029768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [187.063142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [187.063151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [187.063154] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [187.063157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [187.065440] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [187.067846] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [187.071645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [187.071770] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [187.071901] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [187.076566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [187.081432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [187.086314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [187.086499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [187.089947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [187.091293] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [187.091653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [187.091976] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [187.092114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [187.092287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [190.259199] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [190.260476] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [190.264233] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [190.264411] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [190.264559] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [190.264729] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A]

<7> [190.264860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [190.264996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [190.265130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [190.265263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [190.265398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [190.265534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [190.265681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [190.265814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [190.265946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [190.266076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [190.266206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [190.266336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [190.266466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [190.266604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [190.266734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [190.266862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [190.266991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [190.267121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [190.267250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [190.267379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [190.267508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [190.267662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [190.267791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [190.267919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [190.268047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [190.268176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [190.268304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [190.268432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [190.268567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [190.268696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [190.268825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [190.268953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [190.269081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [190.269210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [190.269339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [190.269467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [190.269608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [190.269737] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [190.269892] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [190.270024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [190.270157] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [190.270287] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [190.270416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [190.270551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [190.270681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [190.270812] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [190.270959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [190.271095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [190.271227] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [190.271374] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [190.271521] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [190.271668] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [190.271804] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [190.271942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [190.272075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [190.272208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [190.272340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [190.272471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [190.272611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [190.272742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [190.272873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [190.273004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [190.273135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [190.273265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [190.273395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [190.273526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [190.273783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [190.273914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [190.274046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [190.274176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [190.274306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [190.274437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [190.274598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [190.274728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [190.274856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [190.274985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [190.275114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [190.275243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [190.275372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [190.275502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [190.275641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [190.275769] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [190.275898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [190.276412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [190.276546] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [190.276932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [190.277060] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [190.277191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [190.277319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [190.277447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [190.277588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [190.277717] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [190.277844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [190.277973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [190.289792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [190.289882] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [190.290028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [190.290208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [190.290435] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.290652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.290852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.291049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [190.291228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [190.291672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [190.291806] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [190.292137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [190.292836] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.292974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.300337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [190.300705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.300936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [190.301665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.303069] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [190.303208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [190.303344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [190.303479] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [190.303624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [190.303758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [190.303934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [190.304156] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [190.304294] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [190.304476] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output

<7> [190.309290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [190.309469] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [190.310277] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [190.310416] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [190.329748] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.330147] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [190.331938] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [190.332114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [190.349627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [190.349976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.350145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.362006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [190.362019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [190.362022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [190.362026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [190.364355] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [190.366770] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [190.370576] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [190.370711] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [190.370848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [190.375319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [190.375528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [190.386481] Console: switching to colour frame buffer device 240x67

<7> [190.386418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [190.390700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress