Results for igt@perf_pmu@busy-accuracy-98

Result: Pass

integration-manifest git-log-oneline i915_display_info15 igt_runner15 runtimes15 results15.json results15-i915-load.json guc_logs15.tar i915_display_info_post_exec15 boot15 dmesg15

DetailValue
Duration 18.28 seconds
Hostname 
shard-mtlp-5
Igt-Version 
IGT-Version: 2.4-ga5c5d6558 (x86_64) (Linux: 7.0.0-CI_DRM_18364-g6784fa94a98a+ x86_64)
Out 
Using IGT_SRANDOM=1777069581 for randomisation
Opened device: /dev/dri/card0
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 984335us, idle 23385us -> 97.68% (target: 98%; average=97.73±0.043%)
1: 10 cycles, busy 1967556us, idle 48075us -> 97.61% (target: 98%; average=97.68±0.020%)
error=0.04% (97.65% vs 97.61%)
Dynamic subtest rcs0: SUCCESS (3.042s)
Starting dynamic subtest: bcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 983706us, idle 25928us -> 97.43% (target: 98%; average=97.48±0.062%)
1: 10 cycles, busy 1965641us, idle 51771us -> 97.43% (target: 98%; average=97.43±0.008%)
error=0.01% (97.44% vs 97.43%)
Dynamic subtest bcs0: SUCCESS (3.052s)
Starting dynamic subtest: vcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 982919us, idle 22902us -> 97.72% (target: 98%; average=97.78±0.068%)
1: 10 cycles, busy 1965357us, idle 46432us -> 97.69% (target: 98%; average=97.72±0.014%)
error=-0.02% (97.67% vs 97.69%)
Dynamic subtest vcs0: SUCCESS (3.039s)
Starting dynamic subtest: vcs1
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 982665us, idle 23224us -> 97.69% (target: 98%; average=97.77±0.079%)
1: 10 cycles, busy 1966141us, idle 46546us -> 97.69% (target: 98%; average=97.68±0.010%)
error=-0.03% (97.66% vs 97.69%)
Dynamic subtest vcs1: SUCCESS (3.044s)
Starting dynamic subtest: vecs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 982129us, idle 22880us -> 97.72% (target: 98%; average=97.81±0.072%)
1: 10 cycles, busy 1965232us, idle 46415us -> 97.69% (target: 98%; average=97.71±0.008%)
error=-0.02% (97.67% vs 97.69%)
Dynamic subtest vecs0: SUCCESS (3.041s)
Starting dynamic subtest: ccs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 982726us, idle 26318us -> 97.39% (target: 98%; average=97.41±0.033%)
1: 10 cycles, busy 1964782us, idle 52991us -> 97.37% (target: 98%; average=97.38±0.009%)
error=-0.04% (97.34% vs 97.37%)
Dynamic subtest ccs0: SUCCESS (3.053s)
Subtest busy-accuracy-98: SUCCESS (18.284s)
Opened device: /dev/dri/renderD128
Err 
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
Dynamic subtest rcs0: SUCCESS (3.042s)
Starting dynamic subtest: bcs0
Dynamic subtest bcs0: SUCCESS (3.052s)
Starting dynamic subtest: vcs0
Dynamic subtest vcs0: SUCCESS (3.039s)
Starting dynamic subtest: vcs1
Dynamic subtest vcs1: SUCCESS (3.044s)
Starting dynamic subtest: vecs0
Dynamic subtest vecs0: SUCCESS (3.041s)
Starting dynamic subtest: ccs0
Dynamic subtest ccs0: SUCCESS (3.053s)
Subtest busy-accuracy-98: SUCCESS (18.284s)
Dmesg
<6> [664.641463] Console: switching to colour dummy device 80x25
<6> [664.641814] [IGT] perf_pmu: executing
<7> [664.648495] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [664.649873] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<6> [664.654119] [IGT] perf_pmu: starting subtest busy-accuracy-98
<6> [664.654509] [IGT] perf_pmu: starting dynamic subtest rcs0
<7> [664.658301] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [667.090152] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD off
<7> [667.090842] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [667.091452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [667.092077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [667.092633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [667.697938] [IGT] perf_pmu: finished subtest rcs0, SUCCESS
<6> [667.698676] [IGT] perf_pmu: starting dynamic subtest bcs0
<7> [667.702623] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [670.752054] [IGT] perf_pmu: finished subtest bcs0, SUCCESS
<6> [670.753601] [IGT] perf_pmu: starting dynamic subtest vcs0
<7> [670.759124] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [673.793679] [IGT] perf_pmu: finished subtest vcs0, SUCCESS
<6> [673.794623] [IGT] perf_pmu: starting dynamic subtest vcs1
<7> [673.798938] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [676.839604] [IGT] perf_pmu: finished subtest vcs1, SUCCESS
<6> [676.840332] [IGT] perf_pmu: starting dynamic subtest vecs0
<7> [676.844363] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [679.882118] [IGT] perf_pmu: finished subtest vecs0, SUCCESS
<6> [679.883744] [IGT] perf_pmu: starting dynamic subtest ccs0
<7> [679.889508] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [682.937726] [IGT] perf_pmu: finished subtest ccs0, SUCCESS
<6> [682.939239] [IGT] perf_pmu: finished subtest busy-accuracy-98, SUCCESS
<7> [682.939760] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [682.940950] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [682.943309] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [683.000278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [683.001236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [683.013279] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [683.013733] [IGT] perf_pmu: exiting, ret=0
<6> [683.024367] Console: switching to colour frame buffer device 180x56
Created at 2026-04-24 23:27:38