igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	54.75 seconds
Hostname	shard-rkl-8
Igt-Version	IGT-Version: 2.4-ga5c5d6558 (x86_64) (Linux: 7.0.0-CI_DRM_18362-g3573339bb775+ x86_64)
Out	Using IGT_SRANDOM=1777049680 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888138051828 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x1744/0x20c0 [i915] intel_atomic_commit+0x2ff/0x350 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.530s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.215s) Subtest gem-execbuf-stress: SUCCESS (54.749s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.530s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.215s) Subtest gem-execbuf-stress: SUCCESS (54.749s)
Dmesg	<7> [133.200908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.201093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.201232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [133.213819] Console: switching to colour dummy device 80x25 <6> [133.214011] [IGT] i915_pm_rpm: executing <7> [133.216013] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [133.216465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [133.216475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [133.246020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.246030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.246033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [133.246036] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [133.248337] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [133.250739] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [133.254548] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [133.254674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [133.255152] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [133.255160] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [133.255165] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [133.255171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [133.255175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [133.255178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [133.255181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [133.255184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [133.255186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [133.255189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [133.255192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [133.255195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [133.255198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [133.255200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [133.255203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [133.255206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [133.255209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [133.255212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [133.255215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [133.255218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.255220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.255223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.255226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [133.255229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [133.255231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [133.255234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [133.255237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [133.255240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [133.255243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [133.255245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [133.255248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [133.255251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.255254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.255257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.255259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [133.255310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [133.255313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [133.259500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [133.259535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [133.259539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [133.263709] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [133.263742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [133.263745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [133.267964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [133.271787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [133.271793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [133.276026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [133.276276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [133.276280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [133.280476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [133.280723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [133.280726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [133.284939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [133.285236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [133.285240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [133.314688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [133.314696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [133.314700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [133.314703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [133.316998] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [133.319391] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [133.323172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [133.323294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [133.323750] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [133.323757] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [133.323762] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [133.323775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes: <7> [133.323778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [133.323782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [133.323785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [133.323788] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [133.323790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [133.323793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [133.323796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [133.323801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [133.323804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [133.323806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [133.323809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [133.323812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [133.323815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [133.323818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [133.323821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [133.323823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.323826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.323829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [133.323832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [133.323835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [133.323837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [133.323840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [133.323843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [133.323846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [133.323849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [133.323852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [133.323855] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [133.323858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.323861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.323864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [133.323866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [133.323888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [133.323891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [133.328069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected <7> [133.328081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [133.328084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [133.332288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [133.332300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [133.332303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [133.336505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [133.336710] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:415] <7> [134.353397] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [134.353669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [134.354353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [134.354544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [134.354686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [134.354847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [134.354989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [134.355127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [134.355276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [134.355408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [134.355540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [134.355672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [134.355812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [134.355944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [134.356076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [134.356207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [134.356341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [134.356476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [134.356611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [134.356743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [134.356887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [134.357019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [134.357149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [134.357279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [134.357410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [134.357539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [134.357668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [134.357804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [134.357933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [134.358064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [134.358192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [134.358321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [134.358450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [134.358578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [134.358708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [134.358854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [134.358984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [134.359113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [134.359243] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [134.359373] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [134.359527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [134.359658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [134.359814] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [134.359943] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [134.360072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [134.360200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [134.360328] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [134.360455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [134.360600] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [134.360736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [134.360881] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [134.361027] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [134.361174] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [134.361309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [134.361444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [134.361575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [134.361707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [134.361846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [134.361976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [134.362107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [134.362280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.362416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.380942] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [134.399960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [134.400660] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output <7> [134.406109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [134.406761] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [134.407418] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [134.408044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [134.408668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [134.409295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [134.409882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [134.410354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [134.410838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [134.411303] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.412001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [134.412612] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [134.413687] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [134.414048] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [134.521134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.521854] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.522448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.524196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.525426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.530251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.531633] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [134.531989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [134.532292] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [134.532433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [134.532863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [134.618570] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [134.619845] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [134.620365] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [134.636010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.636697] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [134.637393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [134.638053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [134.638728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.639457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.640145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.640836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.641492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [134.643019] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [134.643583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [134.644803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [134.647026] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.647593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.658949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.659146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.659356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.675200] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [134.693782] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [134.694847] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [134.694852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [134.694881] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [134.697448] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [134.700030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [134.704703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [134.704907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [134.705062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.709663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.714536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.719503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.720548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.722012] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [134.722131] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [134.777177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.777632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.778061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.779608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.780278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.787327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.788766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [134.790138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [134.790921] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [134.791478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [134.792132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.835052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.835443] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [134.836100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [134.836728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [134.837449] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.838173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.838897] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.839557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [134.840213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [134.841754] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [134.842386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [134.843143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [134.845337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.845933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.857392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.857918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.858113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [134.862136] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [134.892536] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [134.892547] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [134.892551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [134.892555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [134.896048] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [134.898502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [134.902303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [134.902433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [134.902569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [134.907015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [134.911889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [134.977194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.977866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.983717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.985241] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [134.985977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [134.986725] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [134.987354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [134.988005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.018011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.018404] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.019060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.019680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.020398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.021101] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.021757] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.022456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.023109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.024484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.025070] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.026269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.028478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.029087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.038169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.038376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.038948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.041130] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [135.073501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.073512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.073516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.073519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.075814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.078238] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.082023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.082151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.082288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.086862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.091733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [135.153208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.153954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.159806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.161175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.161622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.161911] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.162048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.162227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.195617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.196097] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.196704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.197386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.198094] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.198763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.199461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.200136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.200755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.201489] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.202109] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.203417] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.204137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.204278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.212920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.213099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.213654] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [135.213877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.247172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.247182] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.247186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.247190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.249480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.251876] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.255657] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.255789] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.255922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.260911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.265792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [135.337115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.337631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.344650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.346203] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.346933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.347686] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.348317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.348970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.461975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.462359] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.463018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.463639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.464352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.465042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.465688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.466376] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.466572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.466822] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.466955] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.467206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.467904] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.468033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.475426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.475524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.475800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.475978] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [135.510514] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.510525] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.510529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.510532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.513711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.516193] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.520526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.520647] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.520788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.527109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.532028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [135.585113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.585905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.591813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.593294] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.594048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.594846] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.595412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.596087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.690604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.691072] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.691677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.692353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.693053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.693725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.694426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.695104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.695731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.696329] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.696463] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.696729] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.697431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.697565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.703698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.703812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.704079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.705106] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [135.735930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.735940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.735944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [135.735947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [135.738232] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [135.740641] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [135.744467] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [135.744597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [135.744733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [135.749651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [135.754515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [135.817075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.817276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.824073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.825490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [135.825751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [135.826047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [135.826185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [135.826356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.950990] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.951369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.952022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.952644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.953359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.954057] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.954706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.955403] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.956047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.956713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.957326] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.958055] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.960220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.960791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.969872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.970078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.970612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [135.972189] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.016398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.016409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.016413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.016416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.020428] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.025658] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.032122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.032252] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.032387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.038163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.043126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.089003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.090328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.096495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.097864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.098102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.098457] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.098593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.098761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.195975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.196361] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.197017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.197642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.198356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.199053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.199713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.200471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.201120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.201808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.202364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.203085] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.205270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.205875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.216147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.216368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.217218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.221339] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.264378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.264389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.264392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.264395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.269645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.274869] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.282584] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.282707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.282881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.287516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.292400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.329174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.329436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.333855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.335261] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.335650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.336105] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.336377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.336686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.446319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.446702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.447396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.448335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.449303] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.450112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.450854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.451527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.452187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.452846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.453301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.453555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.454238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.454372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.461788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.462101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.462831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.464958] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.497048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.497059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.497062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.497066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.499364] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.501760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.505557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.505686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.505833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.510760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.515632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.577097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.577505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.584404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.585913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.586634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.587446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.588041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.588653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.712411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.712839] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.713439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.714121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.715079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.716084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.717054] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.717995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.718920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.719924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.720742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.721835] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.724373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.725265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.735873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.736150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.736767] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.738449] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.771006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.771017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.771021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.771024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.773342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.775803] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.779611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.779737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.779894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.784823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.789676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [136.848967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.849663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.854436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.855797] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [136.856057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [136.856339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [136.856476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [136.856647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.892560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.893017] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [136.893616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [136.894288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [136.894983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.895650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.896341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.897004] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [136.897626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [136.898343] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [136.898926] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [136.899626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [136.901932] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.902488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.912794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.912944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.913423] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [136.913593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [136.946819] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.946830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.946833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [136.946837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [136.950208] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [136.952601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [136.956381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [136.956508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [136.956644] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [136.961421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [136.966309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.033153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.033906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.039760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.041258] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.041987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.042734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.043349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.043978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [137.150743] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [137.151989] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [137.152413] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [137.166955] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.167230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.167710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.168268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.168967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.169528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.170129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.170684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.171258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.172295] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.172805] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.174139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.176010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.176497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.186714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.186888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.187166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.198164] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [137.221396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.221407] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.221411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.221414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.223717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.226127] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.229897] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.230026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.230167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.235073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.239940] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.244912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [137.245939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.247351] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [137.247444] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [137.305281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [137.306012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.306598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.308350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.308987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.314808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.316273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.316993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.317734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.318346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.318981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.360884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.361262] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [137.361894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [137.362510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [137.363209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.363896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.364544] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.365241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [137.365882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [137.366543] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [137.367145] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [137.367866] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [137.370015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.370570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.380890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.381106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.381816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [137.383590] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [137.416533] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [137.416544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [137.416548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [137.416551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [137.418864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [137.421317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [137.425120] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [137.425247] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [137.425381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [137.430734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [137.435631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [137.497251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.497987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.503849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.505227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [137.505482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [137.505764] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [137.505916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [137.506087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.541007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.541385] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.542037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.542663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.543382] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.544080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.544730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.545320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.545498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.545749] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [142.545895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.546143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.546828] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.546961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.553135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.553231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.553493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [142.554901] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [142.586644] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.586655] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.586658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [142.586662] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [142.588967] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [142.591373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [142.595172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [142.595299] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [142.595433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [142.600381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [142.605260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [142.665189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.665373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.670987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.672344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.672589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.672879] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.673016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.673188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.962647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [144.975086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.975771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.976455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.977166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.977871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.978551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.978957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.979153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.979338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.979742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.979905] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.980331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.981033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.981171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.990988] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.991124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.027111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.027122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.027126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.027131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.030589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.032981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.036795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.036925] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.037064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.041977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.048042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.054359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [145.088760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.088769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.088772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [145.088776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [145.091190] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [145.093601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [145.097405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [145.097530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [145.097662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [145.102191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [145.107086] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [145.113134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.113460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.116822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.118175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.118458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.118742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.118895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.119136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [147.702302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [147.702683] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [147.703340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [147.704012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [147.704763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.705480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.706168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.706839] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [147.707082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [147.707340] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [147.707473] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [147.707726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [147.708427] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [147.708558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [147.715950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [147.716046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [147.716364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [147.717425] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [147.749349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [147.749360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [147.749363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [147.749367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [147.751671] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [147.754083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [147.757878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [147.758005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [147.758148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [147.762725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [147.767593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [147.825546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [147.826293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [147.833375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [147.834775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [147.835085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [147.835495] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [147.835667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [147.835839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [152.866508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [152.866968] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [152.867569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [152.868262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [152.869045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.869750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.870419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.871133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [152.871783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [152.872470] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [152.872604] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [152.872944] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [152.873759] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [152.874342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [152.884686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [152.884933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [152.885475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [152.887001] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [152.920101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [152.920111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [152.920115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [152.920119] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [152.922408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [152.924817] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [152.928601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [152.928739] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [152.928875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [152.933820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [152.938695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [153.026150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [153.026905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [153.032792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [153.034157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [153.034466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [153.034834] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [153.035016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [153.035187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.202158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [155.214055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [155.214497] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [155.215159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [155.215789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [155.216768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.217807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.218548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.219573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [155.220047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [155.220284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [155.220421] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [155.220955] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [155.221682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [155.221883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.229312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [155.229405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [155.265407] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.265418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.265422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.265425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.267717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.270111] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.273891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.274031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.274167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [155.278783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [155.283683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [155.288565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [155.323296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [155.323305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [155.323309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [155.323312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [155.325733] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [155.328298] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [155.332552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [155.332682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [155.332816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [155.337990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [155.342876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [155.347717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.347898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.351367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.352697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.352987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.353348] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.353517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.353689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.136405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.136781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [158.137425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [158.138050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [158.138763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.139458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.140145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.140906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.141147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [158.141437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [158.141570] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [158.141825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [158.142506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.142640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.151261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.151438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.151889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [158.153656] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [158.185117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [158.185128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [158.185132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [158.185135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [158.187451] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [158.189866] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [158.193666] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [158.193792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [158.193926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [158.198453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [158.203300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [158.258680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.259435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.266508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.267907] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [158.268223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [158.268581] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [158.268756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [158.268927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [163.308261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [163.308686] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [163.309305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [163.309972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [163.310668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.311365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.312070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.312737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.313363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [163.313917] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [163.314050] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [163.314301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [163.314993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [163.315128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [163.322526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [163.322625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [163.322938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [163.323811] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [163.355971] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [163.355981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [163.355985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [163.355988] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [163.358267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [163.360735] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [163.364525] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [163.364658] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [163.364796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [163.369305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [163.374186] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [163.426867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [163.427559] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [163.433584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [163.435029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [163.435906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [163.436989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [163.437737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [163.438351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [165.442947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [165.455011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [165.455412] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [165.456074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [165.456710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [165.457724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [165.458738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [165.459503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [165.460453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [165.460711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [165.461192] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [165.461330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [165.461596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [165.462361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [165.462500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [165.469872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [165.469968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [165.503443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [165.503453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [165.503457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [165.503460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [165.505757] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [165.508160] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [165.511936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [165.512066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [165.512202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [165.517202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [165.523225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [165.528189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [165.562781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [165.562790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [165.562793] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [165.562797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [165.565104] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [165.567502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [165.571278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [165.571406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [165.571541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [165.576550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [165.581427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [165.586311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [165.586515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [165.589922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [165.591255] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [165.591548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [165.591842] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [165.592043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [165.592281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [165.696306] pcieport 0000:00:1b.0: AER: Correctable error message received from 0000:01:00.0 <4> [165.696337] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [165.696344] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [165.696351] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [168.537858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [168.538320] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [168.538916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [168.539593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [168.540284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.540952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.541654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.542323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [168.542946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [168.543520] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [168.543652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [168.543908] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [168.544590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [168.544723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [168.554568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [168.554744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [168.555382] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [168.558265] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [168.589051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [168.589622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [168.589626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [168.589629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [168.591921] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [168.594338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [168.598143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [168.598271] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [168.598443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [168.603159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [168.608039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [168.699156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [168.699454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [168.705136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [168.706579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [168.707311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [168.708102] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [168.708662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [168.709304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [173.812106] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [173.812539] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [173.813136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [173.813799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [173.814480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.815150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.815838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.816505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [173.817123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [173.817565] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [173.817697] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [173.817953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [173.818636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [173.818769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [173.824929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [173.825028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [173.825304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [173.826524] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [173.860063] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [173.860074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [173.860078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [173.860082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [173.862377] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [173.864827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [173.868613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [173.868736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [173.868869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [173.873049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [173.877923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [173.939895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [173.940639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [173.946527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [173.947893] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [173.948129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [173.948425] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [173.948562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [173.948734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [175.683730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [175.695681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [175.696148] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [175.696845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [175.697758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [175.698715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.699409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.700551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.701461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [175.701891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [175.702138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [175.702332] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [175.702678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [175.703381] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.703579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.711020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [175.711138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.743370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [175.743380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [175.743383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [175.743387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [175.746828] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [175.749225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [175.753013] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [175.753142] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [175.753278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [175.757904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [175.762762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [175.768826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [175.803752] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [175.803761] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [175.803764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [175.803768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [175.806051] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [175.808438] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [175.812214] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [175.812340] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [175.812472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [175.817103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [175.823136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [175.828096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.828342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [175.832858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [175.834291] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [175.834576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [175.834883] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [175.835022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [175.835199] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [178.981800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [178.981975] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [178.982121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [178.982294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [178.982521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.982735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.982933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.983129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [178.983307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [178.983558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [178.983702] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [178.983953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [178.984637] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [178.984786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [178.990923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [178.991026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [178.991295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [178.994875] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [179.039552] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [179.039564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [179.039568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [179.039571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [179.044864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [179.050131] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [179.057848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [179.057992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [179.058129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [179.062751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [179.067626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [179.100072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [179.100466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [179.106157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [179.107661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [179.108430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [179.109233] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [179.109820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [179.110431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.209833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.210309] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [184.210911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [184.211592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [184.212306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [184.212998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [184.213650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [184.214332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [184.214973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [184.215422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [184.215555] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [184.215807] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [184.216494] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.216628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.224056] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.224167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.224494] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [184.224620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [184.256915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [184.256926] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [184.256930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [184.256940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [184.259240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [184.261648] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [184.265452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [184.265580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [184.265715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [184.271050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [184.275923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [184.340357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.341119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.348184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.349644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [184.350394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [184.351212] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [184.351781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [184.352450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.924278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [185.936136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.936551] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [185.937219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [185.937850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [185.938562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.939331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.940062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.940722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [185.941449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [185.942166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [185.942298] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [185.942581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [185.943275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.943412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.949548] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.949640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.984278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [185.984288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [185.984291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [185.984295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [185.986838] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [185.989252] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [185.993052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [185.993179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [185.993313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [185.998261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [186.003139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [186.008026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [186.041390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [186.041399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [186.041402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [186.041406] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [186.043692] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [186.046100] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [186.049879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [186.049997] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [186.050139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [186.054909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [186.059782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [186.064661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.064845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.069477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.070881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [186.071183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [186.071468] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [186.071607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [186.071777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [189.367842] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [189.369081] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [189.372719] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [189.372896] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [189.373034] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [189.373192] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A] <7> [189.373341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [189.373478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [189.373613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [189.373748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [189.373885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [189.374019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [189.374154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [189.374309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [189.374441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [189.374571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [189.374702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [189.374832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [189.374963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [189.375092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [189.375232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [189.375362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [189.375493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [189.375622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [189.375750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [189.375879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [189.376008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [189.376137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [189.376279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [189.376408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [189.376537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [189.376665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [189.376793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [189.376921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [189.377050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [189.377185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [189.377313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [189.377441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [189.377569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [189.377698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [189.377826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [189.377954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [189.378083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [189.378220] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [189.378377] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [189.378510] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [189.378643] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [189.378773] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [189.378902] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [189.379030] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [189.379159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [189.379353] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [189.379501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [189.379638] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [189.379770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [189.379913] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [189.380059] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [189.380291] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [189.380428] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [189.380566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [189.380700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [189.380832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [189.380965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [189.381096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [189.381236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [189.381367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [189.381497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [189.381626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [189.381756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [189.381885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [189.382015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [189.382145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [189.382287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [189.382417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [189.382547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.382678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [189.382807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [189.382937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [189.383065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [189.383201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0 <7> [189.383331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [189.383459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [189.383587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [189.383716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [189.383844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [189.383973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [189.384102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [189.384243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.384371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.384499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.384627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.384756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.384883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [189.385012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.385139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.385281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [189.385408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [189.385537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [189.385665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [189.385793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [189.385922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [189.386050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [189.386182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [189.386311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [189.386439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [189.398386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.398474] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [189.398621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [189.398797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.399025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.399241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.399442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.399638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [189.399816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.400261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [189.400395] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.400733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.401440] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.401581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.408949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.409288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.409472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.410223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.411634] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [189.411784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [189.411931] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [189.412079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [189.412251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [189.412395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [189.412596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [189.412840] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [189.412991] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [189.413186] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output <7> [189.417988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [189.418165] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [189.418975] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [189.419116] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [189.438550] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <7> [189.438945] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [189.440207] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [189.440195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [189.440970] [IGT] i915_pm_rpm: exiting, ret=0 <7> [189.457275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.457603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.457766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.470151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [189.470166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [189.470176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k <7> [189.470181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0 <7> [189.472480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0) <7> [189.474913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0) <7> [189.478700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz) <7> [189.478826] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port <7> [189.478964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [189.483444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.483711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.495107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <6> [189.495329] Console: switching to colour frame buffer device 240x67 <7> [189.499379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [133.200908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.201093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.201232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.216465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [133.216475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [133.246020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.246030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.246033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [133.246036] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [133.248337] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [133.250739] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [133.254548] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [133.254674] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [133.255152] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [133.255160] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [133.255165] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [133.255171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [133.255175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [133.255178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [133.255181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [133.255184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [133.255186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [133.255189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [133.255192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [133.255195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [133.255198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [133.255200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [133.255203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [133.255206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [133.255209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [133.255212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [133.255215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [133.255218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.255220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.255223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.255226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [133.255229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [133.255231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [133.255234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [133.255237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [133.255240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [133.255243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [133.255245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [133.255248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [133.255251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.255254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.255257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.255259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [133.255310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [133.255313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [133.259500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [133.259535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [133.259539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [133.263709] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [133.263742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [133.263745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [133.267964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [133.271787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [133.271793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [133.276026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [133.276276] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [133.276280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [133.280476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [133.280723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [133.280726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [133.284939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [133.285236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [133.285240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [133.314688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [133.314696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [133.314700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [133.314703] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [133.316998] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [133.319391] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [133.323172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [133.323294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [133.323750] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [133.323757] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [133.323762] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [133.323775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] probed modes:

<7> [133.323778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [133.323782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [133.323785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [133.323788] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [133.323790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [133.323793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [133.323796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [133.323801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [133.323804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [133.323806] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [133.323809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [133.323812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [133.323815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [133.323818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [133.323821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [133.323823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.323826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.323829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [133.323832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [133.323835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [133.323837] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [133.323840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [133.323843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [133.323846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [133.323849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [133.323852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [133.323855] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [133.323858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.323861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.323864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [133.323866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [133.323888] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [133.323891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [133.328069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] disconnected

<7> [133.328081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [133.328084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [133.332288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [133.332300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [133.332303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [133.336505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [134.353397] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [134.353669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [134.354353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [134.354544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [134.354686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [134.354847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [134.354989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [134.355127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [134.355276] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [134.355408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [134.355540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [134.355672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [134.355812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [134.355944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [134.356076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [134.356207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [134.356341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [134.356476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [134.356611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [134.356743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [134.356887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [134.357019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [134.357149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [134.357279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [134.357410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [134.357539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [134.357668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [134.357804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [134.357933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [134.358064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [134.358192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [134.358321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [134.358450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [134.358578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [134.358708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [134.358854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [134.358984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [134.359113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [134.359243] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [134.359373] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [134.359527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [134.359658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [134.359814] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [134.359943] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [134.360072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [134.360200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [134.360328] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [134.360455] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [134.360600] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [134.360736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [134.360881] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [134.361027] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [134.361174] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [134.361309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [134.361444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [134.361575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [134.361707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [134.361846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [134.361976] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [134.362107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [134.362280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.362416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.380942] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [134.399960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [134.400660] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Disabling DP dual mode adaptor TMDS output

<7> [134.406109] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [134.406761] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [134.407418] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [134.408044] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [134.408668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [134.409295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [134.409882] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [134.410354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [134.410838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [134.411303] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.412001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [134.412612] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [134.413687] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [134.414048] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [134.521134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.521854] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.522448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.524196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.525426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.530251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.531633] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [134.531989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [134.532292] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [134.532433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [134.532863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [134.618570] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [134.636010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.636697] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [134.637393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [134.638053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [134.638728] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.639457] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.640145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.640836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.641492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [134.643019] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [134.643583] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [134.644803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [134.647026] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.647593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.658949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.659146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.659356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.675200] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [134.693782] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [134.694847] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [134.694852] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [134.694881] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [134.697448] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [134.700030] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [134.704703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [134.704907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [134.705062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.709663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.714536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.719503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.720548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.722012] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [134.722131] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [134.777177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.777632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.778061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.779608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.780278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.787327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.788766] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [134.790138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [134.790921] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [134.791478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [134.792132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.835052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.835443] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [134.836100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [134.836728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [134.837449] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.838173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.838897] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.839557] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [134.840213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [134.841754] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [134.842386] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [134.843143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [134.845337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.845933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.857392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.857918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.858113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [134.862136] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [134.892536] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [134.892547] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [134.892551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [134.892555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [134.896048] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [134.898502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [134.902303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [134.902433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [134.902569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [134.907015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [134.911889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [134.977194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.977866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.983717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.985241] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [134.985977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [134.986725] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [134.987354] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [134.988005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.018011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.018404] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.019060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.019680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.020398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.021101] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.021757] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.022456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.023109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.024484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.025070] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.026269] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.028478] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.029087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.038169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.038376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.038948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.041130] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [135.073501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.073512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.073516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.073519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.075814] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.078238] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.082023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.082151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.082288] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.086862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.091733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [135.153208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.153954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.159806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.161175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.161622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.161911] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.162048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.162227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.195617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.196097] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.196704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.197386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.198094] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.198763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.199461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.200136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.200755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.201489] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.202109] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.203417] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.204137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.204278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.212920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.213099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.213654] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [135.213877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.247172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.247182] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.247186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.247190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.249480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.251876] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.255657] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.255789] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.255922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.260911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.265792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [135.337115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.337631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.344650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.346203] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.346933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.347686] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.348317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.348970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.461975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.462359] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.463018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.463639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.464352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.465042] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.465688] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.466376] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.466572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.466822] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.466955] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.467206] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.467904] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.468033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.475426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.475524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.475800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.475978] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [135.510514] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.510525] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.510529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.510532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.513711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.516193] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.520526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.520647] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.520788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.527109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.532028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [135.585113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.585905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.591813] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.593294] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.594048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.594846] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.595412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.596087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.690604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.691072] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.691677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.692353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.693053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.693725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.694426] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.695104] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.695731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.696329] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.696463] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.696729] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.697431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.697565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.703698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.703812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.704079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.705106] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [135.735930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.735940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.735944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [135.735947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [135.738232] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [135.740641] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [135.744467] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [135.744597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [135.744733] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [135.749651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [135.754515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [135.817075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.817276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.824073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.825490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [135.825751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [135.826047] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [135.826185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [135.826356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.950990] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.951369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.952022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.952644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.953359] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.954057] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.954706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.955403] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.956047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.956713] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.957326] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.958055] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.960220] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.960791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.969872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.970078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.970612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [135.972189] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.016398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.016409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.016413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.016416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.020428] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.025658] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.032122] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.032252] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.032387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.038163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.043126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.089003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.090328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.096495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.097864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.098102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.098457] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.098593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.098761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.195975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.196361] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.197017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.197642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.198356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.199053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.199713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.200471] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.201120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.201808] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.202364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.203085] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.205270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.205875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.216147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.216368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.217218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.221339] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.264378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.264389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.264392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.264395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.269645] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.274869] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.282584] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.282707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.282881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.287516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.292400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.329174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.329436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.333855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.335261] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.335650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.336105] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.336377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.336686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.446319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.446702] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.447396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.448335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.449303] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.450112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.450854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.451527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.452187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.452846] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.453301] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.453555] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.454238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.454372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.461788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.462101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.462831] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.464958] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.497048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.497059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.497062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.497066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.499364] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.501760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.505557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.505686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.505833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.510760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.515632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.577097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.577505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.584404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.585913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.586634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.587446] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.588041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.588653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.712411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.712839] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.713439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.714121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.715079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.716084] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.717054] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.717995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.718920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.719924] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.720742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.721835] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.724373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.725265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.735873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.736150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.736767] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.738449] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.771006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.771017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.771021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.771024] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.773342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.775803] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.779611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.779737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.779894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.784823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.789676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [136.848967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.849663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.854436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.855797] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [136.856057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [136.856339] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [136.856476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [136.856647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.892560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.893017] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [136.893616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [136.894288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [136.894983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.895650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.896341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.897004] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [136.897626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [136.898343] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [136.898926] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [136.899626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [136.901932] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.902488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.912794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.912944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.913423] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [136.913593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [136.946819] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.946830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.946833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [136.946837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [136.950208] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [136.952601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [136.956381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [136.956508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [136.956644] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [136.961421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [136.966309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.033153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.033906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.039760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.041258] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.041987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.042734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.043349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.043978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [137.151989] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [137.166955] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.167230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.167710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.168268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.168967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.169528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.170129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.170684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.171258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.172295] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.172805] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.174139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.176010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.176497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.186714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.186888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.187166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.198164] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [137.221396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.221407] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.221411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.221414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.223717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.226127] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.229897] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.230026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.230167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.235073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.239940] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.244912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [137.245939] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.247351] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [137.247444] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [137.305281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [137.306012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.306598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.308350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.308987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.314808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.316273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.316993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.317734] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.318346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.318981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.360884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.361262] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [137.361894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [137.362510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [137.363209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.363896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.364544] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.365241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [137.365882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [137.366543] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [137.367145] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [137.367866] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [137.370015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.370570] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.380890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.381106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.381816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [137.383590] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [137.416533] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [137.416544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [137.416548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [137.416551] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [137.418864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [137.421317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [137.425120] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [137.425247] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [137.425381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [137.430734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [137.435631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [137.497251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.497987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.503849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.505227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [137.505482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [137.505764] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [137.505916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [137.506087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.541007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.541385] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.542037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.542663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.543382] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.544080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.544730] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.545320] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.545498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.545749] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [142.545895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.546143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.546828] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.546961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.553135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.553231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.553493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [142.554901] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [142.586644] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.586655] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.586658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [142.586662] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [142.588967] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [142.591373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [142.595172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [142.595299] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [142.595433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [142.600381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [142.605260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [142.665189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.665373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.670987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.672344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.672589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.672879] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.673016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.673188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.962647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [144.975086] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.975771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.976455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.977166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.977871] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.978551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.978957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.979153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.979338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.979742] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.979905] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.980331] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.981033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.981171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.990988] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.991124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.027111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.027122] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.027126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.027131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.030589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.032981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.036795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.036925] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.037064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.041977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.048042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.054359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [145.088760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.088769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.088772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [145.088776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [145.091190] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [145.093601] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [145.097405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [145.097530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [145.097662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [145.102191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [145.107086] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [145.113134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.113460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.116822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.118175] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.118458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.118742] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.118895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.119136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [147.702302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [147.702683] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [147.703340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [147.704012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [147.704763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.705480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.706168] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.706839] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [147.707082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [147.707340] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [147.707473] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [147.707726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [147.708427] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [147.708558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [147.715950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [147.716046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [147.716364] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [147.717425] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [147.749349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [147.749360] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [147.749363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [147.749367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [147.751671] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [147.754083] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [147.757878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [147.758005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [147.758148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [147.762725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [147.767593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [147.825546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [147.826293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [147.833375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [147.834775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [147.835085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [147.835495] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [147.835667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [147.835839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [152.866508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [152.866968] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [152.867569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [152.868262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [152.869045] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.869750] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.870419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.871133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [152.871783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [152.872470] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [152.872604] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [152.872944] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [152.873759] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [152.874342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [152.884686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [152.884933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [152.885475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [152.887001] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [152.920101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [152.920111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [152.920115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [152.920119] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [152.922408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [152.924817] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [152.928601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [152.928739] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [152.928875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [152.933820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [152.938695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [153.026150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [153.026905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [153.032792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [153.034157] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [153.034466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [153.034834] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [153.035016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [153.035187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.202158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [155.214055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [155.214497] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [155.215159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [155.215789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [155.216768] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.217807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.218548] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.219573] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [155.220047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [155.220284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [155.220421] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [155.220955] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [155.221682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [155.221883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.229312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [155.229405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [155.265407] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.265418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.265422] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.265425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.267717] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.270111] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.273891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.274031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.274167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [155.278783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [155.283683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [155.288565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [155.323296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [155.323305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [155.323309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [155.323312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [155.325733] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [155.328298] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [155.332552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [155.332682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [155.332816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [155.337990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [155.342876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [155.347717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.347898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.351367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.352697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.352987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.353348] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.353517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.353689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.136405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.136781] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [158.137425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [158.138050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [158.138763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.139458] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.140145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.140906] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.141147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [158.141437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [158.141570] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [158.141825] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [158.142506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.142640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.151261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.151438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.151889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [158.153656] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [158.185117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [158.185128] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [158.185132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [158.185135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [158.187451] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [158.189866] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [158.193666] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [158.193792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [158.193926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [158.198453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [158.203300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [158.258680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.259435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.266508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.267907] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [158.268223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [158.268581] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [158.268756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [158.268927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [163.308261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [163.308686] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [163.309305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [163.309972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [163.310668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.311365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.312070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.312737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.313363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [163.313917] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [163.314050] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [163.314301] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [163.314993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [163.315128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [163.322526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [163.322625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [163.322938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [163.323811] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [163.355971] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [163.355981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [163.355985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [163.355988] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [163.358267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [163.360735] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [163.364525] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [163.364658] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [163.364796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [163.369305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [163.374186] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [163.426867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [163.427559] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [163.433584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [163.435029] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [163.435906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [163.436989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [163.437737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [163.438351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [165.442947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [165.455011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [165.455412] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [165.456074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [165.456710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [165.457724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [165.458738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [165.459503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [165.460453] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [165.460711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [165.461192] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [165.461330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [165.461596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [165.462361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [165.462500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [165.469872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [165.469968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [165.503443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [165.503453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [165.503457] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [165.503460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [165.505757] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [165.508160] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [165.511936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [165.512066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [165.512202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [165.517202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [165.523225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [165.528189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [165.562781] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [165.562790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [165.562793] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [165.562797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [165.565104] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [165.567502] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [165.571278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [165.571406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [165.571541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [165.576550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [165.581427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [165.586311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [165.586515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [165.589922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [165.591255] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [165.591548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [165.591842] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [165.592043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [165.592281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [165.696306] pcieport 0000:00:1b.0: AER: Correctable error message received from 0000:01:00.0

<4> [165.696337] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [165.696344] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [168.537858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [168.538320] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [168.538916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [168.539593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [168.540284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.540952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.541654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.542323] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [168.542946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [168.543520] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [168.543652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [168.543908] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [168.544590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [168.544723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [168.554568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [168.554744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [168.555382] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [168.558265] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [168.589051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [168.589622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [168.589626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [168.589629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [168.591921] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [168.594338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [168.598143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [168.598271] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [168.598443] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [168.603159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [168.608039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [168.699156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [168.699454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [168.705136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [168.706579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [168.707311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [168.708102] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [168.708662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [168.709304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [173.812106] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [173.812539] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [173.813136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [173.813799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [173.814480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.815150] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.815838] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.816505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [173.817123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [173.817565] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [173.817697] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [173.817953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [173.818636] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [173.818769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [173.824929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [173.825028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [173.825304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [173.826524] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [173.860063] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [173.860074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [173.860078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [173.860082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [173.862377] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [173.864827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [173.868613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [173.868736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [173.868869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [173.873049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [173.877923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [173.939895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [173.940639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [173.946527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [173.947893] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [173.948129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [173.948425] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [173.948562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [173.948734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [175.683730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [175.695681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [175.696148] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [175.696845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [175.697758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [175.698715] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.699409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.700551] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.701461] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [175.701891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [175.702138] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [175.702332] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [175.702678] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [175.703381] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.703579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.711020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [175.711138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.743370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [175.743380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [175.743383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [175.743387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [175.746828] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [175.749225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [175.753013] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [175.753142] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [175.753278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [175.757904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [175.762762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [175.768826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [175.803752] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [175.803761] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [175.803764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [175.803768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [175.806051] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [175.808438] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [175.812214] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [175.812340] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [175.812472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [175.817103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [175.823136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [175.828096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.828342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [175.832858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [175.834291] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [175.834576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [175.834883] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [175.835022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [175.835199] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [178.981800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [178.981975] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [178.982121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [178.982294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [178.982521] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.982735] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.982933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.983129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [178.983307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [178.983558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [178.983702] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [178.983953] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [178.984637] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [178.984786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [178.990923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [178.991026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [178.991295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [178.994875] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [179.039552] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [179.039564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [179.039568] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [179.039571] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [179.044864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [179.050131] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [179.057848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [179.057992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [179.058129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [179.062751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [179.067626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [179.100072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [179.100466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [179.106157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [179.107661] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [179.108430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [179.109233] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [179.109820] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [179.110431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [184.209833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [184.210309] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [184.210911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [184.211592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [184.212306] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [184.212998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [184.213650] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [184.214332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [184.214973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [184.215422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [184.215555] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [184.215807] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [184.216494] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [184.216628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [184.224056] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [184.224167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [184.224494] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [184.224620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [184.256915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [184.256926] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [184.256930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [184.256940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [184.259240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [184.261648] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [184.265452] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [184.265580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [184.265715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [184.271050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [184.275923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [184.340357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [184.341119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [184.348184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [184.349644] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [184.350394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [184.351212] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [184.351781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [184.352450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [185.924278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [185.936136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [185.936551] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [185.937219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [185.937850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [185.938562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.939331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.940062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.940722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [185.941449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [185.942166] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [185.942298] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [185.942581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [185.943275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [185.943412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [185.949548] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [185.949640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [185.984278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [185.984288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [185.984291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [185.984295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [185.986838] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [185.989252] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [185.993052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [185.993179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [185.993313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [185.998261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [186.003139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [186.008026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [186.041390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [186.041399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [186.041402] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [186.041406] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [186.043692] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [186.046100] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [186.049879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [186.049997] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [186.050139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [186.054909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [186.059782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [186.064661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.064845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [186.069477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.070881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [186.071183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [186.071468] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [186.071607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [186.071777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [189.367842] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [189.369081] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [189.372719] i915 0000:00:02.0: [drm:compute_baseline_pipe_bpp [i915]] [CONNECTOR:390:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [189.372896] i915 0000:00:02.0: [drm:intel_hdmi_compute_output_format [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [189.373034] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [189.373192] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:389:DDI B/PHY B] [CRTC:151:pipe A]

<7> [189.373341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [189.373478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [189.373613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [189.373748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [189.373885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [189.374019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [189.374154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [189.374309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [189.374441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [189.374571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [189.374702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [189.374832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [189.374963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [189.375092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [189.375232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [189.375362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [189.375493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [189.375622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [189.375750] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [189.375879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [189.376008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [189.376137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [189.376279] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [189.376408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [189.376537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [189.376665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [189.376793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [189.376921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [189.377050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [189.377185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [189.377313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [189.377441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [189.377569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [189.377698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [189.377826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [189.377954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [189.378083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [189.378220] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [189.378377] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [189.378510] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [189.378643] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [189.378773] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [189.378902] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [189.379030] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [189.379159] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [189.379353] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [189.379501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [189.379638] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [189.379770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [189.379913] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [189.380059] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [189.380291] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [189.380428] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [189.380566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [189.380700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [189.380832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [189.380965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [189.381096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [189.381236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [189.381367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [189.381497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [189.381626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [189.381756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [189.381885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [189.382015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [189.382145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [189.382287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [189.382417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [189.382547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.382678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [189.382807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [189.382937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [189.383065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [189.383201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0

<7> [189.383331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [189.383459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [189.383587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [189.383716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [189.383844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [189.383973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [189.384102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [189.384243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.384371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.384499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.384627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.384756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.384883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [189.385012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.385139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.385281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [189.385408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [189.385537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [189.385665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [189.385793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [189.385922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [189.386050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [189.386182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [189.386311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [189.386439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [189.398386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [189.398474] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [189.398621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [189.398797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.399025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.399241] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.399442] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.399638] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [189.399816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.400261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [189.400395] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.400733] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.401440] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.401581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.408949] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [189.409288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.409472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [189.410223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.411634] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [189.411784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [189.411931] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [189.412079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [189.412251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [189.412395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [189.412596] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [189.412840] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [189.412991] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [189.413186] i915 0000:00:02.0: [drm:intel_dp_dual_mode_set_tmds_output [i915]] Enabling DP dual mode adaptor TMDS output

<7> [189.417988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [189.418165] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [189.418975] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [189.419116] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [189.438550] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.438945] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [189.440207] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [189.440195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [189.457275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [189.457603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [189.457766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [189.470151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [189.470166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [189.470176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD monitor fitHeadless4k

<7> [189.470181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:HDMI-A-1] ELD size 36, SAD count 0

<7> [189.472480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)

<7> [189.474913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)

<7> [189.478700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)

<7> [189.478826] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port

<7> [189.478964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [189.483444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [189.483711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [189.495107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<6> [189.495329] Console: switching to colour frame buffer device 240x67

<7> [189.499379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress