Results for igt@kms_plane_scaling@plane-scaler-unity-scaling-with-modifiers

Result: Pass

integration-manifest git-log-oneline i915_display_info2 igt_runner2 runtimes2 results2.json results2-i915-load.json guc_logs2.tar i915_display_info_post_exec2 boot2 dmesg2

DetailValue
Duration 4.62 seconds
Hostname
shard-mtlp-5
Igt-Version
IGT-Version: 2.4-g7f3362137 (x86_64) (Linux: 7.0.0-rc6-CI_DRM_18281-gd873f0156bd0+ x86_64)
Out
Using IGT_SRANDOM=1775405120 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-scaler-unity-scaling-with-modifiers
Starting dynamic subtest: pipe-A
Trying on eDP-1
Dynamic subtest pipe-A: SUCCESS (0.362s)
Starting dynamic subtest: pipe-B
Trying on eDP-1
Dynamic subtest pipe-B: SUCCESS (1.440s)
Starting dynamic subtest: pipe-C
Trying on eDP-1
Dynamic subtest pipe-C: SUCCESS (1.372s)
Starting dynamic subtest: pipe-D
Trying on eDP-1
Dynamic subtest pipe-D: SUCCESS (1.437s)
Subtest plane-scaler-unity-scaling-with-modifiers: SUCCESS (4.618s)
Err
Starting subtest: plane-scaler-unity-scaling-with-modifiers
Starting dynamic subtest: pipe-A
Dynamic subtest pipe-A: SUCCESS (0.362s)
Starting dynamic subtest: pipe-B
Dynamic subtest pipe-B: SUCCESS (1.440s)
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (1.372s)
Starting dynamic subtest: pipe-D
Dynamic subtest pipe-D: SUCCESS (1.437s)
Subtest plane-scaler-unity-scaling-with-modifiers: SUCCESS (4.618s)
Dmesg
<6> [273.947238] Console: switching to colour dummy device 80x25
<6> [273.947604] [IGT] kms_plane_scaling: executing
<7> [273.952124] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [273.953237] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [273.971850] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [273.977241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [273.977249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [273.981448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [273.981697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [273.981701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [273.985894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [273.986127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [273.986130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [273.986360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [273.986588] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [273.986591] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [273.990947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [273.991184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [273.991186] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [273.991407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [273.991639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [273.991644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [273.991889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<7> [273.992189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [273.992192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [273.992742] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [273.993133] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [273.993255] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [273.993374] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [273.993509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [273.993514] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [273.993516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [273.993531] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [273.993648] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [273.993782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [273.994219] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [273.994222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [273.994233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [273.994235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [273.998428] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [273.998438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1]
<7> [273.998441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [274.002632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:529:HDMI-A-1] disconnected
<7> [274.002640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [274.002643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:535:DP-2]
<7> [274.002872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [274.002880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2]
<7> [274.002882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [274.007143] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:HDMI-A-2] disconnected
<7> [274.007153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3]
<7> [274.007156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-3]
<7> [274.007372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-3] disconnected
<7> [274.007380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4]
<7> [274.007382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-4]
<7> [274.007603] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-4] disconnected
<6> [274.008032] [IGT] kms_plane_scaling: starting subtest plane-scaler-unity-scaling-with-modifiers
<6> [274.008513] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [274.009699] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.026537] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [274.026758] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.026790] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [274.026820] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.026957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.027086] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.027213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.027336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.027472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.027609] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.027774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.027909] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.028041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.028171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.028343] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.037530] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.037698] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.037814] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.038006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.038209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.038348] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.038484] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.038625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.038800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.038963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.039101] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.039235] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.039367] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.048433] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.049855] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.049886] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [274.049916] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.050067] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.050211] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.050340] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.050464] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.050597] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.050770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.050907] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.051043] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.051184] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.051506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.051858] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.059803] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.060023] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.060124] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.060330] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.060511] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.060693] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.060858] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.061033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.061210] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.061385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.061557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.061750] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.061922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.070652] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.072471] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.072501] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [274.072529] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.072682] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.072816] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.072944] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.073070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.073204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.073342] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.073476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.073611] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.073754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.073889] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.074052] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.081968] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.082050] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.082187] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.082318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.082448] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.082575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.082727] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.082867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.083006] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.083141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.083275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.083408] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.092988] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.094370] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.094399] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [274.094426] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.094573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.094757] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.094891] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.095017] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.095152] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.095288] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.095425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.095562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.095705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.095841] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.096005] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.104149] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.104303] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.104387] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.104523] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.104652] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.104801] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.104983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.105179] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.105374] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.105522] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.105655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.105804] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.105935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.115096] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.116465] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.116496] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [274.116527] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.116699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.116838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.116963] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.117085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.117216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.117354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.117490] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.117624] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.117767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.117897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.118146] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.126469] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.126725] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.126847] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.127084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.127310] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.127542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.127795] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.128039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.128244] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.128369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.128491] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.128611] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.128740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.128865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.129000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.129131] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.129263] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.129390] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.129516] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.137319] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.138614] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.138642] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [274.138677] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.138825] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.138970] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.139094] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.139213] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.139339] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.139474] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.139606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.139747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.139878] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.140007] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.140165] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.148614] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.148725] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.148923] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.149106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.149257] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.149387] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.149521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.149710] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.149835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.149957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.150076] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.150195] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.150318] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.150484] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.150610] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.150781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.150904] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.151027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.151205] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.151393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.151580] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.151769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.151902] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.152033] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.159546] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.161775] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.161863] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [274.161942] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.162407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.162921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.163288] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.163545] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.163841] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.164134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.164422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.164717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.164924] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.165066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.165242] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.170873] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.171026] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.171101] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.171234] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.171363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.171489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.171612] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.171762] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.171902] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.172038] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.172173] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.172308] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.172441] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.181745] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.183046] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.183073] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [274.183099] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.183233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.183366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.183503] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.183648] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.183798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.183936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.184073] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.184211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.184347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.184483] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.184641] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.193152] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.193536] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.193753] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.194095] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.194444] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.194813] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.195151] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.195377] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.195564] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.195790] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.196057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.196277] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.196476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.203960] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.205386] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.205414] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [274.205441] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.205600] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.205783] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.205922] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.206054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.206193] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.206336] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.206478] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.206618] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.206767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.206907] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.207077] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.215311] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.215418] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.215600] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.215804] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.215984] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.216164] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.216355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.216546] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.216710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.216862] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.217015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.217171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.226210] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.227607] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.227633] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [274.227671] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.227819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.227981] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.228121] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.228243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.228372] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.228509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.228645] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.228793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.228929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.229063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.229226] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.237532] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.237713] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.237799] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.237942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.238080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.238214] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.238345] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.238485] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.238633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.238798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.238943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.239087] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.239230] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.248435] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.250504] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.250602] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [274.250721] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.251227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.251584] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.251942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.252279] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.252641] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.252943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.253148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.253354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.253552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.253755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.254002] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.260353] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.260846] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.260919] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.261055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.261185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.261313] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.261438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.261570] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.261726] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.261865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.262003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.262137] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.262271] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.270652] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.272065] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.272096] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [274.272125] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.272282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.272415] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.272541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.272676] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.272805] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.272950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.273098] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.273239] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.273373] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.273505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.273672] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.282045] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.282149] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.282305] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.282449] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.282581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.282735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.282942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.283147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.283333] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.283478] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.283623] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.283786] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.292930] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.295060] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.295220] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [274.295358] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.296085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.296512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.296862] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.297163] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.297446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.297763] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.298046] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.298321] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.298595] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.298876] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.299240] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.304836] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.305421] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.305773] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.306114] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.306387] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.306648] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.306925] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.307216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.307614] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.307913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.308173] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.308424] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.308692] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.309015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.309343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.309619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.309898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.310175] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.310530] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.326279] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.329081] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.329179] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [274.329267] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.329798] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.330106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.330416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.330745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.331059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.331331] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.331520] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.331719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.331916] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.332095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.332329] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [274.337879] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [274.338438] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.338720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.339251] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.339771] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.340255] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.340528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.340817] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.341158] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.341417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.341696] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.341943] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.342081] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.342225] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.342411] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.342552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.342700] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [274.342841] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [274.342981] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [274.343124] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [274.343259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.343395] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.343526] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.343662] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.343796] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.359553] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [274.360949] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [274.360977] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [274.361004] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [274.361146] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [274.361276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.361402] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.361524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [274.361662] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [274.361798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [274.361932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.362064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.362194] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [274.362323] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [274.362478] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [274.371786] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [274.372971] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [274.374863] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [274.375528] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [274.375736] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:269:pipe B] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [274.375879] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [274.376023] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [274.376177] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:269:pipe B]
<7> [274.376312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [274.376462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [274.376607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [274.376762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [274.376906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [274.377052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [274.377195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [274.377336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [274.377476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [274.377615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [274.377769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [274.377909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [274.378049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [274.378186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [274.378325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [274.378462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [274.378601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [274.378748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [274.378886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [274.379025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [274.379163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [274.379299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [274.379436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [274.379574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [274.379721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [274.379858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [274.379996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [274.380134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [274.380272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [274.380409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [274.380548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [274.380713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [274.380851] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [274.380988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [274.381126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [274.381265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [274.381408] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [274.381547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [274.381710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [274.381857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [274.381996] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [274.382136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [274.382308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [274.382490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [274.382659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [274.382823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [274.382974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [274.383137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [274.383355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [274.383542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [274.383728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [274.383911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [274.384058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [274.384200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [274.384355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [274.384530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [274.384712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [274.384861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [274.385003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [274.385138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [274.385271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [274.385405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [274.385537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [274.385680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [274.385840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [274.385977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [274.386144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [274.386309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [274.386455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [274.386588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [274.386734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [274.386870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [274.387004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [274.387139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [274.387272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [274.387405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [274.387539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [274.387678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [274.387811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [274.387944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [274.388077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [274.388208] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset
<7> [274.388356] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [274.388589] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [274.388771] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2
<7> [274.388906] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [274.389037] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [274.389167] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [274.389297] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [274.389426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [274.389556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [274.389714] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [274.389860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [274.390003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [274.390144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.390284] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.390424] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [274.390561] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [274.390723] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 256910 kHz -> 0 kHz
<7> [274.390883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:269:pipe B] min cdclk: 0 kHz -> 256910 kHz
<7> [274.391062] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:269:pipe B] allocated DPLL 0
<7> [274.391207] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:269:pipe B] reserving DPLL 0
<7> [274.391358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]
<7> [274.391504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [274.391643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [274.391796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [274.391934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [274.392070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [274.392205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [274.392340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: yes [modeset]
<7> [274.392477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [274.392613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [274.392762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [274.392917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [274.393059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [274.393196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [274.393331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [274.393467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [274.393604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [274.393751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [274.393894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [274.394028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [274.394161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [274.394294] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [274.394428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [274.394563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [274.394710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [274.394851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [274.394984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [274.395117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [274.395249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [274.395382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [274.395516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [274.395654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [274.395802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [274.395958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [274.396097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [274.396232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [274.396366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [274.396500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [274.396631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [274.396780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [274.396927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [274.397064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [274.397198] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [274.397332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [274.397465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [274.397599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [274.397747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [274.397886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [274.398021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [274.398155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [274.398296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [274.398443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [274.398579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [274.398734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [274.398874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [274.399007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [274.399137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [274.399268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [274.399399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.399534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.399677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.399946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [274.400519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [274.401061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.401568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.402076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [274.402572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [274.403020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [FB:568] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [274.403374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [274.403726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [274.404071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no
<7> [274.404409] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no
<7> [274.404614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no
<7> [274.404817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no
<7> [274.405041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no
<7> [274.411449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [274.411639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7> [274.411856] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [274.412156] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [274.615126] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [274.616098] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [274.626918] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [274.627302] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [274.627448] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [274.627865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [274.627959] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [274.679910] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [274.680460] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [274.680961] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [274.682777] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [274.683284] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [274.683432] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [274.683966] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [274.685147] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [274.685755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [274.686314] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [274.686592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [274.686819] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [274.687027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [274.687478] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [274.687788] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [274.688084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [274.688343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [274.688570] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [274.688699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [274.688821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [274.688940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [274.689060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [274.689178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [274.689295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [274.689412] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [274.689533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [274.689658] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [274.689779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [274.689897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [274.690016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [274.690135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [274.690254] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [274.690397] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [274.690537] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:535:DP-2]
<7> [274.690683] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [274.690825] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-3]
<7> [274.690964] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-4]
<7> [274.691160] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [274.691368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [274.692721] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:269:pipe B]
<7> [274.692916] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [274.695096] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [274.695246] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [275.038951] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [275.039095] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [275.040013] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [275.040045] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4
<7> [275.191177] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [275.222077] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [275.222688] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [275.223208] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [275.254546] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [275.255103] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [275.255606] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [275.256197] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [275.423114] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [275.424034] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [275.424746] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [275.427919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [275.429321] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [275.430030] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [275.431115] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [275.432105] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [275.433069] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [275.433184] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [275.434484] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [275.434622] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [275.435184] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B
<7> [275.435440] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [275.435557] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe B
<7> [275.435752] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [275.446682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [275.446827] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)
<7> [275.447023] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [275.447171] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.448635] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [275.448826] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B]
<7> [275.451805] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B
<7> [275.451969] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [275.451998] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:568] is removed
<7> [275.452035] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.452165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.452290] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.452414] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.452537] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.452690] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.452826] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.452959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.453090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.453228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.453358] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.453543] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.457859] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.458006] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.458082] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.458208] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.458332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.458456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.458577] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.458741] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.458880] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.459019] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.459154] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.459287] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.459418] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.468816] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.470132] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.470159] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:569] is removed
<7> [275.470188] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.470330] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.470483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.470663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.470804] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.470950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.471094] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.471227] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.471360] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.471494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.471642] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.471804] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.480247] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.480396] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.480469] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.480635] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.480788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.480932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.481065] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.481198] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.481333] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.481467] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.481612] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.481748] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.481882] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.491041] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.492339] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.492366] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:569] is removed
<7> [275.492392] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.492524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.492668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.492795] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.492919] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.493052] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.493191] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.493325] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.493458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.493596] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.493735] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.493896] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.502457] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.502542] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.502704] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.502833] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.502957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.503078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.503208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.503344] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.503477] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.503618] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.503749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.503878] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.513291] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.514647] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.514676] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [275.514703] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.514839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.514971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.515095] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.515217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.515347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.515483] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.515644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.515779] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.515911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.516044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.516206] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.524555] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.524742] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.524822] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.524953] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.525079] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.525203] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.525325] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.525458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.525610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.525752] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.525886] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.526018] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.526154] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.535506] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.536840] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.536873] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [275.536906] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.537075] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.537230] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.537363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.537486] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.537661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.537800] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.537937] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.538071] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.538206] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.538338] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.538501] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.546935] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.547088] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.547158] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.547291] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.547416] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.547540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.547685] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.547824] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.547960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.548092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.548224] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.548357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.548490] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.557703] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.559216] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.559244] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [275.559271] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.559407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.559563] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.559724] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.559907] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.560097] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.560255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.560402] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.560545] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.560715] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.560844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.561010] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.569028] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.569107] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.569242] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.569368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.569491] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.569645] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.569807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.569950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.570098] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.570237] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.570370] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.570505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.579929] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.581252] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.581286] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [275.581316] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.581475] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.581615] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.581744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.581868] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.582000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.582139] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.582275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.582410] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.582546] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.582736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.582908] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.591285] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.591431] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.591508] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.591689] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.591855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.592028] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.592164] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.592297] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.592467] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.592608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.592733] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.592856] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.592977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.593101] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.593236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.593372] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.593507] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.593655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.593788] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.602168] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.603485] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.603511] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [275.603539] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.603699] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.603835] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.603965] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.604090] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.604224] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.604365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.604502] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.604650] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.604786] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.604920] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.605082] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.613571] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.613772] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.613848] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.613980] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.614107] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.614232] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.614356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.614487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.614683] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.614822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.614946] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.615069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.615190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.615315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.615480] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.615621] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.615745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.615867] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.615987] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.616110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.616244] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.616377] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.616509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.616654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.616788] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.624396] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.626028] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.626075] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [275.626121] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.626338] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.626535] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.626745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.626932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.627133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.627344] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.627547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.627756] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.627956] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.628152] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.628396] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.635792] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.636093] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.636672] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.637034] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.637495] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.638750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.638898] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.639079] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.639206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.639329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.639453] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.639621] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.639813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.640078] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.640277] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.640463] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.640669] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.640852] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.641071] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.641343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.641552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.641774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.641967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.642156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.657702] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.659012] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.659038] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [275.659064] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.659199] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.659329] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.659456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.659595] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.659790] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.659985] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.660181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.660374] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.660564] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.660833] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.661067] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.669031] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.669321] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.669458] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.669772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.670250] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.670996] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.671632] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.672275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.672811] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.673194] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.673485] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.673773] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.674046] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.691160] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.693252] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.693332] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [275.693409] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.693812] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.694121] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.694406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.694698] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.695014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.695337] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.695646] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.695936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.696216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.696496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.696880] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.702715] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.703151] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.703403] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.703794] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.704090] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.704355] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.704620] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.704922] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.705223] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.705504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.705790] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.706068] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.706337] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.724414] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.726556] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.726661] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [275.726738] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.727086] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.727360] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.727656] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.727926] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.728211] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.728506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.728817] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.729103] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.729375] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.729652] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.730032] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.735976] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.736279] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.736817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.737283] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.737764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.738200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.738557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.738878] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.739171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.739454] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.739696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.739855] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.746628] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.748083] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.748117] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [275.748153] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.748299] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.748446] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.748588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.748721] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.748864] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.749011] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.749157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.749299] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.749438] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.749582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.749756] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.757841] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.757989] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.758062] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.758197] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.758326] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.758451] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.758589] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.758736] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.758877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.759014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.759150] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.759284] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.759419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.768836] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.770192] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.770225] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [275.770259] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.770420] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.770586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.770736] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.770864] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.771001] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.771146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.771290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.771429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.771569] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.771724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.771893] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [275.780147] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [275.780304] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.780385] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [275.780526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.780694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [275.780896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [275.781118] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [275.781352] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [275.781559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.781838] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.782062] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.782306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.782667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.802171] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [275.803747] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [275.803789] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [275.803828] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [275.804033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [275.804228] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.804422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.804690] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [275.804895] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [275.805115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [275.805278] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.805420] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.805563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [275.805737] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [275.805914] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [275.814147] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [275.815163] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [275.816826] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [275.817630] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [275.817788] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:387:pipe C] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [275.817923] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [275.818048] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder C
<7> [275.818184] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [275.818324] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:387:pipe C]
<7> [275.818449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [275.818599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [275.818735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [275.818871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [275.819006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [275.819140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [275.819272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [275.819404] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [275.819536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [275.819680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [275.819811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [275.819941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [275.820072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [275.820203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [275.820333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [275.820462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [275.820596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [275.820727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [275.820856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [275.820985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [275.821114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [275.821242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [275.821371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [275.821501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [275.821642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [275.821772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [275.821902] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [275.822034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [275.822164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [275.822293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [275.822420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [275.822548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [275.822693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [275.822825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [275.822953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [275.823083] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [275.823215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [275.823341] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [275.823469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [275.823599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [275.823727] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset
<7> [275.823853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [275.823982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [275.824109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [275.824237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [275.824366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [275.824498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [275.824640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [275.824773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [275.824905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [275.825036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [275.825172] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [275.825310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [275.825443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [275.825582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [275.825719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [275.825855] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [275.825985] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [275.826117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [275.826252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [275.826381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [275.826506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [275.826640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [275.826767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [275.826901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [275.827034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [275.827165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [275.827289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [275.827414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [275.827539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [275.827679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [275.827806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [275.827934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [275.828062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [275.828189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [275.828315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [275.828441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [275.828566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [275.828740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [275.828869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [275.828996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [275.829123] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [275.829254] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:269:pipe B] releasing DPLL 0
<7> [275.829411] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [275.829537] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [275.829674] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:387:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [275.829797] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:cursor B] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [275.829919] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [275.830044] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:381:cursor C] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [275.830163] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [275.830281] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [275.830400] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [275.830519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [275.830659] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [275.830792] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [275.830933] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.831067] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.831217] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [275.831347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [275.831478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:269:pipe B] min cdclk: 256910 kHz -> 0 kHz
<7> [275.831617] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:387:pipe C] min cdclk: 0 kHz -> 256910 kHz
<7> [275.831771] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:387:pipe C] allocated DPLL 0
<7> [275.831902] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:387:pipe C] reserving DPLL 0
<7> [275.832033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [modeset]
<7> [275.832167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [NOFB], visible: no
<7> [275.832299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no
<7> [275.832429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no
<7> [275.832557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no
<7> [275.832704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no
<7> [275.832832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no
<7> [275.832961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: yes [modeset]
<7> [275.833089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [275.833217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [275.833348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [275.833480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [275.833640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [275.833775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [275.833903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [275.834029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [275.834156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [275.834284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [275.834412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [275.834541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [275.834682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [275.834809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [275.834937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [275.835064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [275.835190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [275.835316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [275.835441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [275.835570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [275.835697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [275.835822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [275.835948] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [275.836074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [275.836201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [275.836355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [275.836534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [275.836678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [275.836805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [275.836931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [275.837057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [275.837182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [275.837308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [275.837433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [275.837559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [275.837700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [275.837828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [275.837956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [275.838082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [275.838208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [275.838333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [275.838458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [275.838586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [275.838712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [275.838838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [275.838963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [275.839089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [275.839216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [275.839342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [275.839468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [275.839598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.839723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.839848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.839973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [275.840098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [275.840225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.840352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.840478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [275.840631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [275.840757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [FB:569] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [275.840884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [275.841010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [275.841135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [275.841260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [275.841385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [275.841510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [275.841646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [275.847349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7> [275.847715] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [275.848284] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [276.054836] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [276.055606] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B
<7> [276.059292] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [276.059622] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [276.059904] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [276.060185] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [276.060483] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [276.110836] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [276.111335] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:269:pipe B]
<7> [276.111489] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [276.112391] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [276.112943] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [276.113450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [276.113397] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [276.114037] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [276.114113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [276.114603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [276.114873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [276.115163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [276.115434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [276.115734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [276.115996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [276.116234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [276.116449] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [276.116726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [276.117006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [276.117244] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [276.117464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [276.117660] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [276.117912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [276.118101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [276.118243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [276.118373] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [276.118501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [276.118651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [276.118783] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [276.118923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [276.119052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [276.119180] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [276.119336] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [276.119502] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:535:DP-2]
<7> [276.119675] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [276.119827] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-3]
<7> [276.119980] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-4]
<7> [276.120199] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [276.120360] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [276.120572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [276.121589] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:387:pipe C]
<7> [276.121813] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [276.123956] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [276.124113] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [276.615041] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [276.639759] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [276.640354] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [276.641001] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [276.672265] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [276.672821] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [276.673327] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [276.673911] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [276.841328] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [276.842309] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [276.842977] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [276.846106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [276.847605] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [276.848264] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [276.849498] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [276.850474] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [276.851424] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [276.851554] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [276.852876] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [276.852996] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [276.853624] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe C
<7> [276.853867] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [276.853984] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe C
<7> [276.854156] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [276.865023] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xd
<7> [276.865314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7> [276.865458] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [276.865679] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B]
<7> [276.865837] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.867106] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [276.867324] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C]
<7> [276.870684] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C
<7> [276.870859] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [276.870898] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:569] is removed
<7> [276.870953] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.871078] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.871199] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.871318] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.871439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.871600] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.871734] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.871867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.872003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.872138] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.872276] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.872458] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.876380] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [276.876566] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.876664] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.876846] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.877007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.877145] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.877284] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.877429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.877639] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.877774] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.877907] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.878039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.878171] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.878306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.878466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.878637] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.878782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.878929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.879129] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.887251] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.888393] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.888424] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:570] is removed
<7> [276.888454] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.888622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.888764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.888904] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.889039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.889181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.889326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.889469] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.889626] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.889774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.889915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.890085] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.898702] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [276.898850] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.898926] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.899058] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.899188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [276.899314] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [276.899439] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [276.899599] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.899850] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.900103] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.900352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [276.900573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [276.900754] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [276.900938] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.901175] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.901357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.901550] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [276.901729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [276.901908] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [276.902092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.902288] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.902479] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.902649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.902782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.902912] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.909475] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.910854] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.910880] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:570] is removed
<7> [276.910904] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.911041] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.911174] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.911301] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.911426] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.911571] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.911708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.911843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.911977] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.912109] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.912241] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.912401] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.920893] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.920981] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.921133] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.921278] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.921420] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.921581] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.921730] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.921921] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.922056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.922188] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.922343] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.922492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.922644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.922830] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.922962] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.923090] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.923220] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.923350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.923485] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.923648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.923793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.923943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.924086] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.924228] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.931672] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.932888] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.932914] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [276.932941] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.933079] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.933240] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.933374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.933586] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.933737] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.933884] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.934028] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.934170] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.934311] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.934450] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.934644] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.942957] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [276.943102] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.943173] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.943307] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.943435] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.943597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.943781] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.943988] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.944190] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.944391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.944607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.944801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.944992] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.953915] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.954977] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.955003] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [276.955028] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.955169] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.955324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.955454] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.955604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.955801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.955995] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.956186] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.956378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.956591] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.956781] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.957010] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.965252] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [276.965446] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.965562] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.965738] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.965909] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [276.966079] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [276.966278] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [276.966464] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.966677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.966856] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.967039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.967218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.967367] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.976138] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.977191] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.977218] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [276.977250] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.977414] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.977567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.977706] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.977838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [276.977977] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [276.978126] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [276.978269] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.978411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.978563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [276.978701] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [276.978876] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [276.987449] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [276.987568] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [276.987720] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [276.987850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [276.987977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [276.988103] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [276.988238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [276.988374] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [276.988529] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.988767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.988956] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [276.989147] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [276.998362] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [276.999418] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [276.999445] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [276.999471] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [276.999666] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [276.999854] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.000069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.000254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.000446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.000663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.000855] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.001047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.001238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.001427] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.001671] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.009687] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.009927] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.010049] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.010267] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.010473] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.010707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.010905] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.011059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.011207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.011354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.011532] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.011692] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.011836] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.020588] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.021652] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.021680] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [277.021706] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.021847] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.021985] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.022122] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.022285] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.022429] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.022654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.022798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.022941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.023085] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.023227] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.023399] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.031926] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.032072] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.032146] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.032280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.032408] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [277.032569] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [277.032750] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [277.032946] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.033144] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.033338] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.033536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.033724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.033911] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.042786] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.043915] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.043944] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [277.043970] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.044110] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.044243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.044367] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.044489] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.044648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.044845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.045038] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.045226] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.045417] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.045636] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.045865] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.054066] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.054196] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.054413] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.054654] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.054865] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.055069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.055305] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.055641] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.055850] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.056020] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.056149] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.056276] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.056408] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.056572] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.056716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.056864] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.057003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.057141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.065035] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.066136] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.066163] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [277.066190] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.066361] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.066506] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.066643] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.066775] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.066917] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.067061] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.067202] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.067343] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.067485] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.067648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.067822] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.076321] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.076472] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.076589] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.076784] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.076915] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.077045] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.077170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.077303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.077476] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.077622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.077802] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.077985] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.078168] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.078355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.078610] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.078790] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.078967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.079148] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.079333] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.079525] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.079720] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.079913] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.080105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.080296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.080483] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.087249] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.088317] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.088349] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [277.088379] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.088583] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.088740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.088864] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.088986] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.089115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.089249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.089383] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.089522] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.089652] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.089780] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.089935] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.098643] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.098883] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.098995] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.099221] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.099438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [277.099696] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [277.099914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [277.100080] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.100242] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.100428] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.100600] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.100754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.100907] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.109472] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.110598] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.110627] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [277.110656] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.110806] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.110942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.111074] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.111205] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.111345] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.111588] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.111744] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.111891] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.112032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.112172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.112340] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.120721] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.120817] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.120991] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.121165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.121338] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.121535] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.121717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.121910] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.122123] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.122315] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.122447] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.122594] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.131681] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.132766] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.132796] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [277.132826] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.132960] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.133087] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.133212] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.133335] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.133466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.133641] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.133852] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.134047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.134363] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.134646] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.134879] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.142976] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.143209] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.143319] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.143578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.143791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.144040] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.144269] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.144434] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.144632] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.144778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.144920] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.145059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.145197] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.153913] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.155019] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.155047] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [277.155077] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.155229] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.155379] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.155534] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.155667] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.155807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.155954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.156102] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.156244] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.156388] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.156543] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.156720] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [277.165381] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [277.165561] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.165634] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.165768] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.165898] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [277.166025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [277.166150] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [277.166283] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [277.166422] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.166591] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.166780] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.167060] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.167382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.176118] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [277.177186] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [277.177218] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [277.177247] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [277.177381] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [277.177518] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.177703] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.177886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [277.178081] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [277.178277] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [277.178471] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.178702] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.178894] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [277.179084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [277.179319] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [277.187793] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [277.188436] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [277.189855] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [277.190609] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [277.190780] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:505:pipe D] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [277.190921] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [277.191058] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder D
<7> [277.191206] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [277.191357] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:505:pipe D]
<7> [277.191507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [277.191656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [277.191803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [277.191946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [277.192086] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [277.192228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [277.192368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [277.192523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [277.192668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [277.192810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [277.192951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [277.193092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [277.193231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [277.193371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [277.193516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [277.193656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [277.193794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [277.193933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [277.194070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [277.194208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [277.194347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [277.194484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [277.194645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [277.194783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [277.194921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [277.195059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [277.195198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [277.195332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [277.195467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [277.195627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [277.195763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [277.195898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [277.196032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [277.196190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [277.196330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [277.196466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [277.196642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [277.196778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [277.196915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [277.197056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [277.197196] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [277.197337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [277.197474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [277.197638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [277.197773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [277.197908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [277.198044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [277.198186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [277.198346] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [277.198486] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [277.198646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [277.198783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [277.198916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [277.199048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [277.199180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [277.199313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [277.199447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [277.199614] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [277.199760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [277.199919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [277.200068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [277.200201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [277.200339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [277.200479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [277.200649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [277.200785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [277.200921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [277.201053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [277.201221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [277.201359] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [277.201547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [277.201687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [277.201822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [277.201958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [277.202096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [277.202232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [277.202370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [277.202515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [277.202652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [277.202797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [277.202937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [277.203075] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] fastset requirement not met, forcing full modeset
<7> [277.203223] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:387:pipe C] releasing DPLL 0
<7> [277.203448] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xd -> 0x3 (total dbuf slices 0xf), mbus joined? no->no
<7> [277.203620] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:387:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [277.203753] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:505:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [277.203906] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:381:cursor C] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [277.204053] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [277.204183] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:499:cursor D] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [277.204311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [277.204438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [277.204579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [277.204707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [277.204848] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [277.204994] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [277.205137] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.205279] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.205418] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [277.205574] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [277.205726] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:387:pipe C] min cdclk: 256910 kHz -> 0 kHz
<7> [277.205865] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:505:pipe D] min cdclk: 0 kHz -> 256910 kHz
<7> [277.206044] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:505:pipe D] allocated DPLL 0
<7> [277.206195] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:505:pipe D] reserving DPLL 0
<7> [277.206341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [modeset]
<7> [277.206485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [NOFB], visible: no
<7> [277.206665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [277.206818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [277.206958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [277.207095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [277.207230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [277.207368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:505:pipe D] enable: yes [modeset]
<7> [277.207511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [277.207649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 30, dithering: 0
<7> [277.207784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [277.207921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [277.208057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [277.208192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [277.208338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [277.208478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [277.208631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [277.208775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [277.208911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [277.209047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [277.209182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [277.209336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [277.209486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [277.209638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [277.209772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [277.209906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [277.210037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [277.210172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [277.210309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [277.210447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [277.210594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [277.210730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [277.210867] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [277.211009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [277.211143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [277.211277] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [277.211417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [277.211608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [277.211749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [277.211886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [277.212051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [277.212183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [277.212315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [277.212446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [277.212591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [277.212728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [277.212861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [277.212995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [277.213133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [277.213269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [277.213404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [277.213556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [277.213694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [277.213832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [277.213967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [277.214111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [277.214252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [277.214387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [277.214531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.214695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.214832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.214962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [277.215097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [277.215231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.215364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.215508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [277.215643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [277.215776] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:389:plane 1D] fb: [FB:570] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [277.215911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [277.216046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [277.216185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:419:plane 2D] fb: [NOFB], visible: no
<7> [277.216319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 3D] fb: [NOFB], visible: no
<7> [277.216452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 4D] fb: [NOFB], visible: no
<7> [277.216602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:489:plane 5D] fb: [NOFB], visible: no
<7> [277.216743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:499:cursor D] fb: [NOFB], visible: no
<7> [277.222691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7> [277.222906] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [277.223216] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [277.431042] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [277.431908] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe C
<7> [277.444120] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [277.444582] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [277.444523] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [277.445053] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [277.445083] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [277.497289] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [277.497871] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [277.498376] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [277.499758] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [277.500289] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:387:pipe C]
<7> [277.500450] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [277.501114] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [277.502086] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [277.502827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [277.503285] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [277.503533] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [277.503758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [277.503975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [277.504186] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [277.504391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [277.504592] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [277.504758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [277.504968] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [277.505141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [277.505276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [277.505403] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [277.505560] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [277.505726] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [277.505852] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [277.505975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [277.506109] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [277.506266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [277.506427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [277.506579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [277.506721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [277.506850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [277.506970] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [277.507117] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:529:HDMI-A-1]
<7> [277.507253] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:535:DP-2]
<7> [277.507391] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:544:HDMI-A-2]
<7> [277.507540] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-3]
<7> [277.507676] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-4]
<7> [277.507861] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [277.508085] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [277.508290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [277.509531] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:505:pipe D]
<7> [277.509682] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [277.511626] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [277.511774] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [278.006861] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [278.076164] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [278.076846] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [278.077427] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [278.108903] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [278.109488] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [278.109993] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [278.110629] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [278.280176] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [278.281089] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [278.281813] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [278.285015] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [278.286373] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [278.286961] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [278.287960] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [278.288962] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [278.289863] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [278.289980] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [278.291274] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [278.291389] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [278.292005] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe D
<7> [278.292244] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [278.292365] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe D
<7> [278.292557] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [278.303419] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3
<7> [278.303722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7> [278.303868] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [278.304073] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C]
<7> [278.304223] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.305474] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [278.305672] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:505:pipe D]
<7> [278.308630] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000061 0x13421c72)
<7> [278.309221] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D
<7> [278.309394] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [278.309443] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:570] is removed
<7> [278.309501] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.309629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.309753] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.309876] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.309998] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.310138] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.310314] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.310529] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.310731] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.310893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.311032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.311216] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.314729] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.314877] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.314955] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.315083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.315209] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.315334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.315505] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.315639] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.315775] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.315913] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.316048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.316181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.316332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.325637] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.326696] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.326725] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:571] is removed
<7> [278.326750] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.326882] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.327006] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.327129] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.327252] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.327382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.327550] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.327687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.327821] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.327954] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.328098] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.328263] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.337040] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.337190] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.337278] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.337408] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.337585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.337727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.337851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.337983] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.338120] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.338254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.338386] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.338533] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.338665] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.347905] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.348972] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.349004] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:571] is removed
<7> [278.349033] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.349184] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.349312] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.349450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.349574] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.349705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.349842] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.349978] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.350114] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.350248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.350381] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.350600] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.359251] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.359341] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.359493] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.359618] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.359744] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.359866] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.359996] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.360170] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.360292] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.360412] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.360548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.360670] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.360794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.360929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.361063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.361196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.361326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.361472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.370092] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.371135] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.371163] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [278.371188] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.371324] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.371469] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.371604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.371727] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.371857] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.371992] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.372126] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.372257] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.372388] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.372557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.372720] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.381366] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.381525] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.381598] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.381741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.381870] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.381997] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.382121] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.382254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.382434] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.382561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.382682] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.382802] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.382923] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.383047] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.383212] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.383334] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.383478] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.383603] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.383725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.383848] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.383984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.384119] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.384254] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.384384] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.384526] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.392308] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.393390] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.393416] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [278.393450] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.393592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.393738] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.393876] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.394003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.394137] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.394272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.394406] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.394554] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.394692] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.394832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.394995] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.403605] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.403751] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.403819] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.403951] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.404079] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.404206] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.404332] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.404482] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.404620] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.404759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.404896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.405029] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.405160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.414511] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.415547] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.415574] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [278.415599] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.415731] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.415863] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.415990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.416117] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.416249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.416385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.416534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.416667] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.416799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.416930] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.417091] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.425820] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.425898] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.426032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.426158] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.426283] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.426407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.426566] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.426751] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.426904] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.427039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.427172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.427306] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.436739] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.437781] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.437807] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [278.437833] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.437970] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.438101] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.438227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.438350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.438538] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.438676] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.438810] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.438941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.439072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.439204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.439365] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.448035] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.448181] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.448252] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.448385] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.448551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.448678] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.448800] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.448931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.449068] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.449201] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.449332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.449473] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.449602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.458974] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.460040] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.460066] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [278.460090] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.460221] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.460356] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.460514] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.460643] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.460777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.460927] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.461074] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.461214] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.461354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.461506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.461695] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.470410] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.470607] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.470686] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.470819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.470946] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.471071] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.471196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.471329] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.471506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.471650] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.471784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.471918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.472050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.481198] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.482491] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.482517] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [278.482542] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.482675] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.482800] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.482924] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.483048] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.483177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.483312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.483465] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.483631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.483767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.483900] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.484088] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.492634] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.492720] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.492848] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.492973] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.493097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.493218] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.493346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.493518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.493712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.493931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.494122] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.494309] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.503695] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.504843] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.504880] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [278.504912] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.505079] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.505227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.505360] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.505503] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.505700] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.505897] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.506092] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.506283] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.506510] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.506649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.506810] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.514650] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.514800] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.514881] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.515010] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.515132] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.515254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.515375] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.515524] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.515661] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.515794] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.515924] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.516053] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.516182] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.525643] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.526704] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.526730] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [278.526755] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.526893] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.527037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.527177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.527306] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.527460] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.527599] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.527751] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.527893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.528025] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.528156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.528316] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.537018] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.537165] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.537255] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.537390] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.537568] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.537694] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.537819] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.537953] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.538123] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.538245] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.538364] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.538496] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.538617] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.538740] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.538872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.539004] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.539133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.539263] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.539392] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.547864] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.549346] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.549373] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [278.549399] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.549567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.549724] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.549854] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.549978] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.550110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.550247] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.550383] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.550531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.550665] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.550798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.550957] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.559250] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.559327] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.559494] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.559617] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.559739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.559860] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.559989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.560165] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.560287] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.560407] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.560546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.560668] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.560792] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.560963] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.561085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.561205] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.561325] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.561457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.561580] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.561715] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.561849] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.561982] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.562112] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.562241] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.570095] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.571373] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.571398] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [278.571431] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.571560] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.571687] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.571810] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.571931] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.572059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.572193] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.572326] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.572508] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.572644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.572774] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.572932] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.581378] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.581548] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.581617] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.581749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.581878] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.582005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.582127] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.582257] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.582393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.582577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.582710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.582839] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.582967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.592309] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.593356] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.593382] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [278.593407] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.593567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.593691] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.593817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.593940] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.594070] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.594207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.594344] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.594486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.594621] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.594756] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.594918] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [278.603737] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [278.603882] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [278.603950] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [278.604084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.604212] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [278.604337] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [278.604482] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [278.604616] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [278.604752] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.604885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.605015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.605145] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.605274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.614671] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [278.615740] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [278.615773] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [278.615805] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [278.615975] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [278.616109] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.616235] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.616361] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [278.616538] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [278.616675] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [278.616808] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.616941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.617072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [278.617203] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [278.617364] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [278.626003] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [278.626537] [IGT] kms_plane_scaling: finished subtest plane-scaler-unity-scaling-with-modifiers, SUCCESS
<7> [278.627137] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<6> [278.627632] [IGT] kms_plane_scaling: exiting, ret=0
<7> [278.628174] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [278.657044] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [278.657330] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [278.657572] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [278.657809] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [278.658082] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [278.658323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [278.658485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [278.658630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [278.658772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [278.658910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [278.659048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [278.659187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [278.659359] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [278.659546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [278.659693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [278.659830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [278.659972] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [278.660106] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [278.660239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [278.660370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [278.660515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [278.660646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [278.660777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [278.660907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [278.661036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [278.661165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [278.661294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [278.661430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [278.661571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [278.661701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [278.661840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [278.661970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [278.662101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [278.662236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [278.662374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [278.662542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [278.662729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [278.662895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [278.663047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [278.663186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [278.663316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [278.663457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [278.663599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [278.663731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [278.663862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [278.663993] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [278.664123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [278.664258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [278.664393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [278.664534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [278.664663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [278.664795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [278.664925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [278.665056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [278.665187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [278.665316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [278.665468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [278.665602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [278.665731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [278.665861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [278.665991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [278.666122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [278.666253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [278.666385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [278.666532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [278.666663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [278.666794] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [278.666927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [278.667063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [278.667194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [278.667324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [278.667463] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [278.667591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [278.667718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [278.667845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [278.667974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [278.668104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [278.668232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [278.668361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [278.668500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [278.668632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [278.668759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [278.668886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [278.669013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [278.669140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [278.669267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [278.669393] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] fastset requirement not met, forcing full modeset
<7> [278.669541] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:505:pipe D] releasing DPLL 0
<7> [278.669715] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [278.669843] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x8 -> 0x1
<7> [278.669967] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:505:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1
<7> [278.670091] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [278.670213] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [278.670336] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [278.670474] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [278.670600] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [278.670723] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [278.670848] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:499:cursor D] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [278.670988] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [278.671127] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [278.671265] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.671403] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.671559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [278.671696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [278.671829] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 256910 kHz
<7> [278.671960] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:505:pipe D] min cdclk: 256910 kHz -> 0 kHz
<7> [278.672126] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [278.672259] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [278.672395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [278.672554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [278.672695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [278.672826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [278.672966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [278.673098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [278.673227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [278.673382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [278.673564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [278.673709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [278.673836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [278.673963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [278.674090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [278.674216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [278.674347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [278.674575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [278.674746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [278.674892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [278.675041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [278.675202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [278.675368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [278.675554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [278.675703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [278.675840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [278.675971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [278.676100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [278.676229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [278.676359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [278.676507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [278.676651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [278.676785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [278.676917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [278.677044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [278.677185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [278.677352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [278.677562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [278.677740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [278.677946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [278.678182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [278.678435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [278.678705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [278.678897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [278.679044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [278.679175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [278.679305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [278.679450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [278.679580] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [278.679711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [278.679843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [278.679973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [278.680106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [278.680237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.680366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.680513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.680640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [278.680772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [278.680903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.681033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.681161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [278.681289] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [278.681430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:509] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [278.681559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [278.681686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [278.681813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [278.681940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [278.682066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [278.682193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [278.682318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [278.682460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:505:pipe D] enable: no [modeset]
<7> [278.682587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:389:plane 1D] fb: [NOFB], visible: no
<7> [278.682714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:419:plane 2D] fb: [NOFB], visible: no
<7> [278.682841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 3D] fb: [NOFB], visible: no
<7> [278.682967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 4D] fb: [NOFB], visible: no
<7> [278.683093] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:489:plane 5D] fb: [NOFB], visible: no
<7> [278.683219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:499:cursor D] fb: [NOFB], visible: no
<7> [278.683443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [278.683629] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000)
<7> [278.683944] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [278.886848] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [278.887813] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe D
<7> [278.894151] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [278.894441] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [278.894758] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [278.895010] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [278.895277] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [278.947493] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [278.948074] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [278.948578] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [278.949677] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [278.950231] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:505:pipe D]
<7> [278.950309] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [278.951067] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [278.952224] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [278.952853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [278.953243] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7> [278.953786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [278.954079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [278.954287] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [278.954471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [278.954675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [278.954835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [278.954993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DDI TC1/PHY TC1]
<7> [278.955148] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST A]
<7> [278.955294] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST B]
<7> [278.955463] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST C]
<7> [278.955608] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:539:DP-MST D]
<7> [278.955867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DDI TC2/PHY TC2]
<7> [278.956075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [278.956340] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [278.956518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [278.956707] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [278.956860] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [278.956985] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [278.957114] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [278.957240] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [278.957364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [278.957536] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [278.957735] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [278.957963] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [278.958094] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [278.958288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [278.959448] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [278.959604] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [278.961626] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [278.961784] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining)
<7> [279.454751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [279.499511] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [279.500090] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [279.500676] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [279.532030] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [279.532590] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [279.533098] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [279.533644] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [279.708184] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [279.709248] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [279.710056] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [279.713533] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [279.715177] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [279.715905] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [279.717020] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [279.718068] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [279.719000] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [279.719123] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [279.720401] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [279.720522] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [279.721108] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [279.721378] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [279.721510] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [279.721701] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 13892
<7> [279.732522] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [279.733960] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [279.734189] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [279.736971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7> [279.737121] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [279.737307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [279.737507] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:505:pipe D]
<7> [279.737885] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [279.743717] Console: switching to colour frame buffer device 180x56
Created at 2026-04-05 17:24:45