igt@i915_pm_rpm@system-suspend-execbuf on shard-rkl@CI_DRM

Detail	Value
Duration	7.25 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.4-g7f3362137 (x86_64) (Linux: 7.0.0-rc6-CI_DRM_18279-gf0ef889ccb91+ x86_64)
Out	Using IGT_SRANDOM=1775286293 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888124f39828 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x730 [i915] intel_atomic_commit_tail+0x12e2/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: system-suspend-execbuf [cmd] rtcwake: assuming RTC uses UTC ... [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Sat Apr 4 07:05:11 2026 Subtest system-suspend-execbuf: SUCCESS (7.252s)
Err	Starting subtest: system-suspend-execbuf Subtest system-suspend-execbuf: SUCCESS (7.252s)
Dmesg	<6> [250.268702] Console: switching to colour dummy device 80x25 <6> [250.268815] [IGT] i915_pm_rpm: executing <7> [250.271861] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [250.272347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [250.272355] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [250.276580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [250.276630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [250.276635] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [250.302369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [250.302379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [250.302382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [250.302385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [250.302591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [250.302711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [250.303019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [250.303141] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [250.303560] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [250.303568] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [250.303573] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [250.303579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [250.303583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [250.303586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [250.303589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [250.303591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [250.303594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [250.303597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [250.303600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [250.303602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [250.303605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [250.303608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [250.303611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [250.303613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [250.303616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [250.303619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [250.303621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [250.303624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.303627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.303630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.303632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [250.303635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [250.303638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [250.303640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [250.303643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [250.303646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [250.303648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [250.303651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [250.303654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [250.303656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.303659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.303662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.303665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [250.303710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [250.303713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [250.307902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [250.307935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [250.307938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [250.312141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [250.315847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [250.315852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [250.320068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [250.320478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [250.320483] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [250.324656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [250.324901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [250.324904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [250.329098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [250.329429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] <7> [250.329433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [250.333631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected <7> [250.333643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] <7> [250.333646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [250.359352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [250.359361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [250.359364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [250.359367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [250.359575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [250.359694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [250.360001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [250.360122] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [250.360524] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [250.360531] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [250.360536] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [250.360542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes: <7> [250.360545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [250.360548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [250.360551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [250.360554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [250.360556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [250.360559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [250.360562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [250.360564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [250.360567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [250.360570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [250.360572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [250.360575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [250.360578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [250.360581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [250.360583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [250.360586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.360589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.360591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [250.360594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [250.360597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [250.360599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [250.360602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [250.360604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [250.360607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [250.360610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [250.360613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [250.360615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [250.360618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.360621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.360623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [250.360626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [250.360647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] <7> [250.360650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [250.364850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected <7> [250.364863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] <7> [250.364866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [250.369040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected <7> [250.369349] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:417] <7> [251.383642] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [251.383905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [251.384577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [251.385239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [251.385898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [251.386541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [251.387094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [251.387685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [251.387894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [251.388025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [251.388155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [251.388292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [251.388430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [251.388558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [251.388688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [251.388816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [251.388944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [251.389073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [251.389201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [251.389351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [251.389504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [251.389631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [251.389759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [251.389886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [251.390013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [251.390140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [251.390277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [251.390428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [251.390556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [251.390684] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [251.390812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [251.390940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [251.391068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [251.391195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [251.391335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [251.391493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [251.391624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [251.391754] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [251.391883] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [251.392013] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0 <7> [251.392168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [251.392309] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [251.392478] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [251.392605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [251.392732] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [251.392857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [251.392982] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [251.393108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [251.393252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0 <7> [251.393402] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [251.393575] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [251.393720] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [251.393852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [251.393985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [251.394116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [251.394245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [251.394396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [251.394551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [251.394680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [251.408003] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [251.427452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [251.428144] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A] <7> [251.428914] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [251.429653] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A] <7> [251.430307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [251.430935] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [251.431594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [251.432229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [251.432838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [251.433494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [251.434033] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [251.434987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [251.435593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [251.436141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [251.437512] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [251.437923] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [251.539690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [251.540403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [251.540995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [251.542773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [251.543738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [251.548616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [251.550002] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [251.550245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [251.550573] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [251.550760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [251.550980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [251.641696] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf <7> [251.642941] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A] <7> [251.654408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [251.654772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [251.655415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [251.656125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [251.656944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.657705] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.658405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.659049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.659724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [251.661131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [251.661743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [251.662519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [251.664603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [251.665182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [251.675545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [251.675717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [251.675938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [251.676748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [251.678417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [251.678603] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B] <7> [251.682757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [251.696349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [251.696645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [251.696792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [251.708518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [251.708529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [251.708534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [251.708538] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [251.708754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [251.708903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [251.709232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [251.709416] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [251.709451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [251.714097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [251.718974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [251.719174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [251.719335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [251.720096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [251.721548] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C] <7> [251.739602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [251.739814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [251.739987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [251.741321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [251.742108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [251.747734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [251.749180] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [251.749783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [251.750245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [251.750670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [251.751092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [251.905807] PM: suspend entry (s2idle) <6> [251.906626] Filesystems sync: 0.000 seconds <6> [251.910235] Freezing user space processes <6> [251.912415] Freezing user space processes completed (elapsed 0.002 seconds) <6> [251.912429] OOM killer disabled. <6> [251.912434] Freezing remaining freezable tasks <6> [251.914089] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) <7> [251.943815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [251.944207] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [251.944881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [251.945535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [251.946203] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.946920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.947600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.948254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [251.948946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [251.950467] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [251.951040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [251.952234] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [251.954195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [251.954679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [251.964798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [251.966086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [251.966230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [251.970957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [251.972531] GFP mask restricted <6> [251.982236] e1000e: EEE TX LPI TIMER: 00000000 <6> [251.982344] e1000e: EEE TX LPI TIMER: 00000011 <7> [251.997610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [251.997620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [251.997624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [251.997627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [251.997842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [251.998070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [251.998371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [251.998496] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [251.998519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [251.998881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [252.000293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [252.001847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [252.002161] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [252.002707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [252.007861] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [252.007877] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [252.015365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [252.015619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [252.015779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [252.015943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [252.017221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [252.018455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [252.018601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [252.019328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [252.020807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [252.020954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [252.021117] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0 <7> [252.021995] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <3> [252.054450] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [252.417036] PM: suspend of devices complete after 444.485 msecs <7> [252.417041] PM: start suspend of devices complete after 502.916 msecs <7> [252.429580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [252.429758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [252.429906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [252.430052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [252.430189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [252.431481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [252.432708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [252.434117] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [252.434422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [252.434750] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [252.434932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [252.435340] PM: late suspend of devices complete after 18.294 msecs <6> [252.444428] ACPI: EC: interrupt blocked <7> [252.630780] PM: noirq suspend of devices complete after 194.794 msecs <6> [252.633947] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off <7> [252.694460] PM: Triggering wakeup from IRQ 9 <6> [252.775713] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry <7> [252.775720] PM: suspend-to-idle <7> [252.775864] ACPI: EC: ACPI EC GPE status set <7> [252.775893] ACPI: PM: Rearming ACPI SCI for wakeup <7> [267.735553] Timekeeping suspended for 14.650 seconds <7> [267.735576] PM: Triggering wakeup from IRQ 9 <7> [267.735763] ACPI: PM: ACPI fixed event wakeup <7> [267.735765] PM: resume from suspend-to-idle <6> [267.967089] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit <6> [267.970543] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on <6> [267.971824] ACPI: EC: interrupt unblocked <7> [268.339438] PM: noirq resume of devices complete after 368.883 msecs <7> [268.342344] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08 <7> [268.343075] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [268.343659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [268.344369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [268.345059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.345741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.346387] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.347058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [268.347735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [268.348416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [268.349001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [268.349673] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [268.351795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [268.352354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [268.352937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [268.353683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [268.354289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [268.354987] PM: early resume of devices complete after 13.831 msecs <7> [268.361053] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [268.361509] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [268.362149] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [268.362478] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [268.363093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:151:pipe A] hw state readout: disabled <7> [268.363789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:269:pipe B] hw state readout: disabled <7> [268.364494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:387:pipe C] hw state readout: disabled <7> [268.364957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A <7> [268.365360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A <7> [268.365705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A <7> [268.366067] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A <7> [268.366346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A <7> [268.366626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:cursor A] hw state readout: disabled, pipe A <7> [268.366952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7> [268.367232] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7> [268.367511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7> [268.367798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7> [268.368076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7> [268.368352] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7> [268.368589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [268.368846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [268.369054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [268.369222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [268.369391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [268.369559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [268.369748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:389:DDI B/PHY B] hw state readout: disabled, pipe A <7> [268.369917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:399:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [268.370085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [268.370237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST A] hw state readout: disabled, pipe A <7> [268.370386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:406:DP-MST B] hw state readout: disabled, pipe B <7> [268.370536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:407:DP-MST C] hw state readout: disabled, pipe C <7> [268.370701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [268.370888] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [268.371060] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [268.371245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:390:HDMI-A-1] hw state readout: disabled <7> [268.371427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:400:HDMI-A-2] hw state readout: disabled <7> [268.371637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:404:DP-1] hw state readout: disabled <7> [268.371804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:412:HDMI-A-3] hw state readout: disabled <7> [268.371946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz <7> [268.372073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:65:plane 2A] min_cdclk 0 kHz <7> [268.372200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:95:plane 3A] min_cdclk 0 kHz <7> [268.372325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:125:plane 4A] min_cdclk 0 kHz <7> [268.372452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:135:plane 5A] min_cdclk 0 kHz <7> [268.372586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:cursor A] min_cdclk 0 kHz <7> [268.372721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:151:pipe A] min_cdclk 0 kHz <7> [268.372847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7> [268.372972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7> [268.373099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7> [268.373225] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7> [268.373351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7> [268.373478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:263:cursor B] min_cdclk 0 kHz <7> [268.373603] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:269:pipe B] min_cdclk 0 kHz <7> [268.373731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [268.373860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [268.373985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [268.374110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [268.374235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [268.374360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [268.374486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [268.374611] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [268.374745] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [268.374873] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [268.374999] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [268.375134] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [268.375265] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [268.375426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [setup_hw_state] <7> [268.375752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7> [268.375964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [268.376261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state <7> [268.376477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [268.376696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.376918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [268.377132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.377345] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [268.377561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dpll_hw_state <7> [268.377819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [268.378025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.378239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [268.378446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.378651] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [268.378881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dpll_hw_state <7> [268.379024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [268.379164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.379309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [268.379447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [268.379587] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset <6> [268.379802] nvme nvme0: 12/0/0 default/read/poll queues <7> [268.379771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [268.379953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset] <7> [268.380169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no <7> [268.380364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [268.380560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [268.380751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [268.380943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [268.381073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [268.381202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [modeset] <7> [268.381330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [NOFB], visible: no <7> [268.381487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [268.381699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [268.381927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [268.382117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [268.382332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [268.382479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [modeset] <7> [268.382609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [NOFB], visible: no <7> [268.382789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no <7> [268.382918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no <7> [268.383046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no <7> [268.383176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no <7> [268.383372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no <7> [268.383671] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [268.383873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [268.384066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [268.384260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [268.384458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [268.384654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [268.384860] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1] <6> [268.385027] serial 00:00: activated <7> [268.385099] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [268.385319] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:404:DP-1] <7> [268.385546] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:412:HDMI-A-3] <7> [268.385861] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [268.386269] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B] <7> [268.386510] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C] <7> [268.386992] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <7> [268.387843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [268.391662] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0 <7> [268.391729] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [268.392064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [268.396302] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [268.396320] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <3> [268.404564] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [268.417799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [268.417809] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [268.417813] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [268.417816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [268.418021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [268.418149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [268.418451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [268.418575] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [268.418597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [268.422775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [268.466911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [268.467087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [268.467236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [268.467392] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [268.467527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [268.468821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <6> [268.667221] ata3: SATA link down (SStatus 4 SControl 300) <6> [268.667279] ata2: SATA link down (SStatus 4 SControl 300) <6> [268.673362] ata4: SATA link down (SStatus 4 SControl 300) <3> [268.810950] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <7> [269.036284] PM: resume of devices complete after 681.284 msecs <7> [269.037158] GFP mask restored <7> [269.037383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [269.041868] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <7> [269.042009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [269.042230] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <6> [269.042473] OOM killer enabled. <6> [269.042485] Restarting tasks: Starting <6> [269.043268] Restarting tasks: Done <6> [269.043296] efivarfs: resyncing variable state <7> [269.043377] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [269.043907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [269.044362] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [269.044657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [269.045031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [269.046137] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) <6> [269.046892] efivarfs: finished resyncing variable state <5> [269.046913] random: crng reseeded on system resumption <6> [269.046933] PM: suspend exit <7> [269.161061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [269.161455] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [269.162115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [269.162796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [269.163470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.164222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.164890] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.165531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.166178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [269.167741] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [269.168330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [269.169519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [269.171590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [269.172204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [269.182432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [269.183022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [269.183264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [269.188998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <3> [269.194751] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <7> [269.218626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [269.218637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [269.218640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [269.218644] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [269.218846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.218972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [269.219274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.219400] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.219422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [269.224680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [269.323046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [269.323818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [269.331036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [269.332572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [269.334064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [269.334932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [269.335520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [269.336186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [269.398913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [269.399285] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [269.399944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [269.400577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [269.401283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.401974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.402617] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.403300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.403934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [269.405252] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [269.405820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [269.406941] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [269.408993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [269.409557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [269.418641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [269.418915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [269.419519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [269.424237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [269.456178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [269.456188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [269.456192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [269.456195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [269.456406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.456529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [269.457459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.457583] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.457606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [269.462347] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [269.531190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [269.531941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [269.537790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [269.539160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [269.539398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [269.539682] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [269.539837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [269.540027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [269.634805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [269.635175] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [269.635835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [269.636473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [269.637183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.637872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.638527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.639202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.639837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [269.640499] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [269.641122] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [269.641814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [269.643841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [269.644399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [269.654731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [269.654973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [269.655578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [269.660233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [269.691403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [269.691413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [269.691417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [269.691420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [269.691623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.692106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [269.692423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.692549] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.692571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [269.697036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [269.762964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [269.763668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [269.769695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [269.771249] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [269.772016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [269.772808] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [269.773438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [269.774121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [269.869445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [269.869879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [269.870487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [269.871151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [269.871836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.872505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.873199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.873863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [269.874476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [269.875185] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [269.875766] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [269.876451] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [269.878529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [269.879135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [269.889428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [269.889655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [269.890290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [269.894985] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [269.927029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [269.927039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [269.927043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [269.927046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [269.927259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.927385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [269.927689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [269.928222] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [269.928244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [269.933073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [270.002887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.003585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.009498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.010942] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.011186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.011469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.011607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.011800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [270.104359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [270.104771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [270.105380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [270.106044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.106736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.107429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.108112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.108770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.109387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.110094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [270.110645] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [270.111404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.113464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [270.114052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [270.124346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [270.124588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.125201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [270.129826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [270.162342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [270.162352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.162356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [270.162359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [270.162568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.162697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [270.163326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.163453] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [270.163476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [270.168002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [270.235004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.235656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.242824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.244319] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.245086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.245892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.246505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.247202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [270.340273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [270.340645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [270.341334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [270.342005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.342673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.343392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.344067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.344731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.345358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.346108] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [270.346665] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [270.347403] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.349461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [270.350071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [270.360358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [270.360594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.361181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [270.365786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [270.397925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [270.397935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.397938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [270.397942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [270.398157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.398279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [270.398581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.398988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [270.399011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [270.403941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [270.466908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.467615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.474795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.476306] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.477077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.477904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.478491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.479163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [270.574870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [270.575241] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [270.575909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [270.576596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.577353] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.578075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.578751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.579416] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.580095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.580814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [270.581369] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [270.582158] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.584219] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [270.584808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [270.595106] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [270.595289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.595839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [270.600476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [270.630449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [270.630460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.630463] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [270.630467] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [270.630685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.630822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [270.631140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.631267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [270.631291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [270.636198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [270.706858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.707127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.713951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.715361] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.715624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.715956] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.716094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.716267] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [270.809832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [270.810201] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [270.810871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [270.811550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [270.812309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.813028] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.813699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.814375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [270.815053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [270.815784] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [270.816343] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [270.817134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [270.819195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [270.819795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [270.830089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [270.830276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [270.830793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [270.835423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [270.866051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [270.866061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [270.866065] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [270.866068] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [270.866271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.866398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [270.866732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [270.866869] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [270.866891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [270.872190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <6> [270.908069] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <7> [270.938854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [270.939521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [270.946622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [270.948018] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [270.948277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [270.948559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [270.948707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [270.948877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [271.044695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [271.045067] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [271.045708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [271.046397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.047144] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.047842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.048485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.049184] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.049827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.050491] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [271.051130] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [271.051858] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.053925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [271.054485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [271.064804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [271.065010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [271.065632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [271.070362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [271.101499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [271.101509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.101513] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [271.101516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [271.101736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.101865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [271.102174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.102301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [271.102324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [271.107210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [271.170878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [271.171575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [271.177582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [271.179103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [271.179834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [271.180583] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [271.181192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [271.181811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [271.277842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [271.278209] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [271.278884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [271.279554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.280308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.281026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.281700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.282365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.283044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.283770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [271.284321] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [271.285079] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.287139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [271.287728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [271.299231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [271.299419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [271.299938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [271.304564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [271.335445] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [271.335455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.335458] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [271.335461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [271.336622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.336767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [271.337077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.337203] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [271.337226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [271.341534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [271.410920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [271.411663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [271.417540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [271.418916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [271.419163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [271.419445] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [271.419582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [271.419766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [271.514177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [271.514549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [271.515238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [271.515980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.516701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.517388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.518103] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.518760] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.519369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.520120] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [271.520699] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [271.521369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.523469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [271.524090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [271.534434] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [271.534672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [271.535200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [271.539859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [271.571855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [271.571865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.571869] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [271.571872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [271.572079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.572206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [271.572515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.572654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [271.572692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [271.579057] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [271.642814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [271.643087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [271.648908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [271.650351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [271.651101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [271.651892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [271.652458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [271.653107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [271.749261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [271.749669] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [271.750278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [271.750955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.751704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.752400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.753115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.753791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.754411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.755142] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [271.755748] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [271.756468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.758580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [271.759193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [271.769563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [271.769865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [271.770387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [271.775045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [271.806902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [271.806912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [271.806915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [271.806919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [271.807130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.807250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [271.807553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [271.808045] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [271.808070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [271.812958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [271.882859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [271.883583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [271.888360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [271.889687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [271.889919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [271.890201] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [271.890338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [271.890508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [271.984266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [271.984685] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [271.985294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [271.985963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [271.986662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.987324] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.988011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.988666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [271.989281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [271.990649] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [271.991202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [271.991913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [271.993954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [271.994508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.003638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.003874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.004615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [272.009231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [272.040270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.040279] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.040283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.040286] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.040493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.040966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.041272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.041396] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.041417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [272.045895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [272.114784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [272.115479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [272.121423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [272.122914] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [272.123666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [272.124413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [272.125010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [272.125657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [272.217431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [272.217894] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [272.218507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [272.219181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [272.219880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.220542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.221231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.221898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.222510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [272.223232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [272.223842] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [272.224520] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [272.226605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [272.227167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.237453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.237727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.238284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [272.242893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [272.272326] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.272336] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.272340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.272343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.272552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.273552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.273883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.274008] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.274029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [272.278432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [272.346791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [272.347484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [272.353428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [272.354924] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [272.355652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [272.356395] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [272.356993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [272.357638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [272.453478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [272.453947] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [272.454576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [272.455263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [272.456008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.456709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.457356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.458055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.458696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [272.459364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [272.459993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [272.460728] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [272.462790] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [272.463356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.474866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.475063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.475593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [272.480248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [272.510487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.510497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.510501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.510504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.510904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.511035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.511343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.511470] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.511492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [272.517021] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [272.586753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [272.587452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [272.593432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [272.594833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [272.595078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [272.595361] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [272.595499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [272.595681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [272.689744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [272.690114] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [272.690780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [272.691462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [272.692219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.692937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.693618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.694281] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.694959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [272.695652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [272.696203] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [272.696967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [272.699022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [272.699601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.709886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.710113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.710678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [272.715269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [272.745078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.745088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.745091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.745095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.745309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.745431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.745977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.746104] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.746127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [272.750764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [272.819669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [272.820367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [272.826299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [272.827771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [272.828483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [272.829374] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [272.829981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [272.830629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [272.924553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [272.924925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [272.925567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [272.926249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [272.926995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.927690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.928341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.929049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.929693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [272.930354] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [272.930968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [272.931707] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [272.933767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [272.934322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.944680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.944913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.945578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [272.950181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [272.982205] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.982215] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.982219] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.982222] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.982422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.983328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.983645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.983773] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.983798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [272.988269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [273.050732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [273.051437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [273.057423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [273.058813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [273.059091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [273.059374] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [273.059519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [273.059690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [273.160474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [273.160952] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [273.161588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [273.162271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [273.163026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.163723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.164368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.165086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.165740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [273.166405] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [273.167049] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [273.167803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [273.169864] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [273.170427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [273.180817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [273.181014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [273.181545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [273.186220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [273.217214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [273.217224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [273.217228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [273.217231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [273.217450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.218087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [273.218420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.219301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [273.219329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [273.224214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [273.290685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [273.291389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [273.297351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [273.298849] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [273.299584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [273.300332] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [273.300943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [273.301576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [273.395590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [273.395960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [273.396630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [273.397308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [273.398057] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.398778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.399418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.400134] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.400794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [273.401504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [273.402091] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [273.402838] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [273.404912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [273.405503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [273.415809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [273.416064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [273.416651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [273.421260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [273.452239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [273.452250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [273.452254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [273.452257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [273.452473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.452609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [273.452923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.453048] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [273.453070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [273.458007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [273.522671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [273.523374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [273.529334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [273.530731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [273.530976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [273.531258] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [273.531394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [273.531575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [273.630585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [273.630956] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [273.631617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [273.632299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [273.633050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.633770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.634424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.635138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.635798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [273.636517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [273.637096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [273.637883] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [273.639937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [273.640532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [273.650823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [273.651049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [273.651671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <7> [273.656363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [273.686145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [273.686155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [273.686159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [273.686162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [273.686375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.686942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [273.687273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.687399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [273.687422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [273.691890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3] <7> [273.762600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [273.762979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [273.769879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [273.771325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [273.772104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [273.772833] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [273.773406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [273.774082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [273.854035] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS <7> [273.858161] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [273.858865] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [273.859403] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [273.860059] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A] <7> [273.860738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [273.861334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [273.861979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [273.862625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [273.863186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [273.863798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [273.864387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [273.865005] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [273.865623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [273.866169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [273.867117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [273.867934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [273.868532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [273.869050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [273.869594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [273.870123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [273.870673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [273.871199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [273.871585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [273.871952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [273.872344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [273.872744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [273.873119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [273.873491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [273.873861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [273.874212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [273.874515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [273.874779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [273.875026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [273.875273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [273.875543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [273.875807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [273.876053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [273.876301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [273.876596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [273.876853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [273.877099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [273.877336] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset <7> [273.877562] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [273.877731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [273.877899] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [273.878063] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [273.878225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [273.878387] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [273.878573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [273.878749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [273.878932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1 <7> [273.879103] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [273.879272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [273.879476] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [273.879666] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [273.879835] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0 <7> [273.880011] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0 <7> [273.880187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset] <7> [273.880357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [273.880528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [273.880675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [273.880808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [273.880939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [273.881069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [273.881199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [273.881329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [273.881472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [273.881613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [273.881742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [273.881871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [273.882000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [273.882128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [273.882256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [273.882386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [273.882569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [273.882699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0 <7> [273.882828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [273.882956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [273.883083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0 <7> [273.883211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [273.883340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [273.883486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [273.883625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [273.883754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [273.883882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [273.884009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [273.884137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.884264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.884391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.884535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [273.884677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [273.884805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.884932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.885059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [273.885186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [273.885313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [273.885455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [273.885595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [273.885725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no <7> [273.885851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no <7> [273.885978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no <7> [273.886106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no <7> [273.886233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no <7> [273.897651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [273.897739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [273.897887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [273.898062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [273.898291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.898539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.898739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.898936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [273.899113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [273.899588] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [273.899725] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [273.900015] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [273.900715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [273.900852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [273.907013] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [273.907189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [273.907319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [273.908202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [273.909840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [273.909998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B] <7> [273.910135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C] <7> [273.910266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D] <7> [273.910397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A] <7> [273.910566] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B] <7> [273.910700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C] <7> [273.910871] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [273.911094] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A] <7> [273.911230] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [273.911443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [273.911617] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [273.912424] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [273.912573] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A] <7> [273.931757] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2] <7> [273.932235] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A] <7> [273.933795] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [273.934033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1] <6> [273.934891] [IGT] i915_pm_rpm: exiting, ret=0 <7> [273.938441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2] <7> [273.964244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [273.964253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [273.964256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k <7> [273.964259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0 <7> [273.964498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.964634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [273.964945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [273.965071] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [273.969650] Console: switching to colour frame buffer device 240x67 <7> [273.969626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1] <7> [273.973818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [250.272347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [250.272355] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [250.276580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [250.276630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [250.276635] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [250.302369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [250.302379] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [250.302382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [250.302385] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [250.302591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [250.302711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [250.303019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [250.303141] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [250.303560] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [250.303568] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [250.303573] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [250.303579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [250.303583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [250.303586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [250.303589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [250.303591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [250.303594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [250.303597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [250.303600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [250.303602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [250.303605] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [250.303608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [250.303611] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [250.303613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [250.303616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [250.303619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [250.303621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [250.303624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.303627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.303630] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.303632] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [250.303635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [250.303638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [250.303640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [250.303643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [250.303646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [250.303648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [250.303651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [250.303654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [250.303656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.303659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.303662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.303665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [250.303710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [250.303713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [250.307902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [250.307935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [250.307938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [250.312141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [250.315847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [250.315852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [250.320068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [250.320478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [250.320483] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [250.324656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [250.324901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [250.324904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [250.329098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [250.329429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1]

<7> [250.329433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [250.333631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:HDMI-A-1] disconnected

<7> [250.333643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2]

<7> [250.333646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [250.359352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [250.359361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [250.359364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [250.359367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [250.359575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [250.359694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [250.360001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [250.360122] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [250.360524] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [250.360531] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [250.360536] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [250.360542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:HDMI-A-2] probed modes:

<7> [250.360545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [250.360548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [250.360551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [250.360554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [250.360556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [250.360559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [250.360562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [250.360564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [250.360567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [250.360570] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [250.360572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [250.360575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [250.360578] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [250.360581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [250.360583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [250.360586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.360589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.360591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [250.360594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [250.360597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [250.360599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [250.360602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [250.360604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [250.360607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [250.360610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [250.360613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [250.360615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [250.360618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.360621] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.360623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [250.360626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [250.360647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1]

<7> [250.360650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [250.364850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:404:DP-1] disconnected

<7> [250.364863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3]

<7> [250.364866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [250.369040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:HDMI-A-3] disconnected

<7> [251.383642] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [251.383905] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [251.384577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [251.385239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [251.385898] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [251.386541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [251.387094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [251.387685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [251.387894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [251.388025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [251.388155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [251.388292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [251.388430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [251.388558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [251.388688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [251.388816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [251.388944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [251.389073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [251.389201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [251.389351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [251.389504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [251.389631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [251.389759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [251.389886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [251.390013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [251.390140] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [251.390277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [251.390428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [251.390556] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [251.390684] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [251.390812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [251.390940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [251.391068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [251.391195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [251.391335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [251.391493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [251.391624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [251.391754] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [251.391883] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [251.392013] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0

<7> [251.392168] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [251.392309] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [251.392478] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [251.392605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [251.392732] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [251.392857] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [251.392982] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [251.393108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [251.393252] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0

<7> [251.393402] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [251.393575] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [251.393720] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [251.393852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [251.393985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [251.394116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [251.394245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [251.394396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [251.394551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [251.394680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [251.408003] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [251.427452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [251.428144] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]

<7> [251.428914] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [251.429653] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:35:plane 1A]

<7> [251.430307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [251.430935] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [251.431594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [251.432229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [251.432838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [251.433494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [251.434033] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [251.434987] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [251.435593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [251.436141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [251.437512] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [251.437923] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [251.539690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [251.540403] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [251.540995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [251.542773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [251.543738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [251.548616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [251.550002] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [251.550245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [251.550573] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [251.550760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [251.550980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [251.641696] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf

<7> [251.642941] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:151:pipe A]

<7> [251.654408] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [251.654772] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [251.655415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [251.656125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [251.656944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.657705] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.658405] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.659049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.659724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [251.661131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [251.661743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [251.662519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [251.664603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [251.665182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [251.675545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [251.675717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [251.675938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [251.676748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [251.678417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [251.678603] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:269:pipe B]

<7> [251.682757] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [251.696349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [251.696645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [251.696792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [251.708518] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [251.708529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [251.708534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [251.708538] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [251.708754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [251.708903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [251.709232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [251.709416] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [251.709451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [251.714097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [251.718974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [251.719174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [251.719335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [251.720096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [251.721548] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]

<7> [251.739602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [251.739814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [251.739987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [251.741321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [251.742108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [251.747734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [251.749180] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [251.749783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [251.750245] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [251.750670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [251.751092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [251.912415] Freezing user space processes completed (elapsed 0.002 seconds)

<6> [251.914089] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

<7> [251.943815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [251.944207] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [251.944881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [251.945535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [251.946203] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.946920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.947600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.948254] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [251.948946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [251.950467] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [251.951040] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [251.952234] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [251.954195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [251.954679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [251.964798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [251.966086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [251.966230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [251.970957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [251.997610] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [251.997620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [251.997624] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [251.997627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [251.997842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [251.998070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [251.998371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [251.998496] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [251.998519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [251.998881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [252.000293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [252.001847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [252.002161] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [252.002707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [252.007861] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [252.007877] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [252.015365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [252.015619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [252.015779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [252.015943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [252.017221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [252.018455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [252.018601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [252.019328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [252.020807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [252.020954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [252.021117] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0

<7> [252.021995] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<3> [252.054450] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [252.417041] PM: start suspend of devices complete after 502.916 msecs

<7> [252.429580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [252.429758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [252.429906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [252.430052] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [252.430189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [252.431481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [252.432708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [252.434117] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [252.434422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [252.434750] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [252.434932] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [252.435340] PM: late suspend of devices complete after 18.294 msecs

<7> [252.630780] PM: noirq suspend of devices complete after 194.794 msecs

<6> [252.633947] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off

<6> [252.775713] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry

<6> [267.967089] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit

<6> [267.970543] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on

<7> [268.339438] PM: noirq resume of devices complete after 368.883 msecs

<7> [268.342344] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08

<7> [268.343075] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [268.343659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [268.344369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [268.345059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.345741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.346387] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.347058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [268.347735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [268.348416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [268.349001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [268.349673] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [268.351795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [268.352354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [268.352937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [268.353683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [268.354289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [268.354987] PM: early resume of devices complete after 13.831 msecs

<7> [268.361053] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [268.361509] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [268.362149] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [268.362478] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [268.363093] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:151:pipe A] hw state readout: disabled

<7> [268.363789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:269:pipe B] hw state readout: disabled

<7> [268.364494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:387:pipe C] hw state readout: disabled

<7> [268.364957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] hw state readout: disabled, pipe A

<7> [268.365360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:65:plane 2A] hw state readout: disabled, pipe A

<7> [268.365705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:95:plane 3A] hw state readout: disabled, pipe A

<7> [268.366067] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:125:plane 4A] hw state readout: disabled, pipe A

<7> [268.366346] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:135:plane 5A] hw state readout: disabled, pipe A

<7> [268.366626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:cursor A] hw state readout: disabled, pipe A

<7> [268.366952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B

<7> [268.367232] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B

<7> [268.367511] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B

<7> [268.367798] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B

<7> [268.368076] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B

<7> [268.368352] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:263:cursor B] hw state readout: disabled, pipe B

<7> [268.368589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [268.368846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [268.369054] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [268.369222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [268.369391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [268.369559] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [268.369748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:389:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [268.369917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:399:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [268.370085] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [268.370237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST A] hw state readout: disabled, pipe A

<7> [268.370386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:406:DP-MST B] hw state readout: disabled, pipe B

<7> [268.370536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:407:DP-MST C] hw state readout: disabled, pipe C

<7> [268.370701] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [268.370888] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [268.371060] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [268.371245] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:390:HDMI-A-1] hw state readout: disabled

<7> [268.371427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:400:HDMI-A-2] hw state readout: disabled

<7> [268.371637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:404:DP-1] hw state readout: disabled

<7> [268.371804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:412:HDMI-A-3] hw state readout: disabled

<7> [268.371946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:35:plane 1A] min_cdclk 0 kHz

<7> [268.372073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:65:plane 2A] min_cdclk 0 kHz

<7> [268.372200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:95:plane 3A] min_cdclk 0 kHz

<7> [268.372325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:125:plane 4A] min_cdclk 0 kHz

<7> [268.372452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:135:plane 5A] min_cdclk 0 kHz

<7> [268.372586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:145:cursor A] min_cdclk 0 kHz

<7> [268.372721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:151:pipe A] min_cdclk 0 kHz

<7> [268.372847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:153:plane 1B] min_cdclk 0 kHz

<7> [268.372972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:183:plane 2B] min_cdclk 0 kHz

<7> [268.373099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:213:plane 3B] min_cdclk 0 kHz

<7> [268.373225] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:243:plane 4B] min_cdclk 0 kHz

<7> [268.373351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:253:plane 5B] min_cdclk 0 kHz

<7> [268.373478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:263:cursor B] min_cdclk 0 kHz

<7> [268.373603] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:269:pipe B] min_cdclk 0 kHz

<7> [268.373731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [268.373860] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [268.373985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [268.374110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [268.374235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [268.374360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [268.374486] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [268.374611] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:151:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [268.374745] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [268.374873] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [268.374999] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [268.375134] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [268.375265] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [268.375426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [setup_hw_state]

<7> [268.375752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [setup_hw_state]

<7> [268.375964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [268.376261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state

<7> [268.376477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [268.376696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.376918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [268.377132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.377345] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [268.377561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dpll_hw_state

<7> [268.377819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [268.378025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.378239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [268.378446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.378651] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [268.378881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dpll_hw_state

<7> [268.379024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [268.379164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.379309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [268.379447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [268.379587] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset

<7> [268.379771] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [268.379953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]

<7> [268.380169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no

<7> [268.380364] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [268.380560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [268.380751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [268.380943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [268.381073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [268.381202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [modeset]

<7> [268.381330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [NOFB], visible: no

<7> [268.381487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [268.381699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [268.381927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [268.382117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [268.382332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [268.382479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [modeset]

<7> [268.382609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [NOFB], visible: no

<7> [268.382789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no

<7> [268.382918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no

<7> [268.383046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no

<7> [268.383176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no

<7> [268.383372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no

<7> [268.383671] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [268.383873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [268.384066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [268.384260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [268.384458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [268.384654] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [268.384860] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [268.385099] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [268.385319] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:404:DP-1]

<7> [268.385546] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [268.385861] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [268.386269] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B]

<7> [268.386510] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C]

<7> [268.386992] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<7> [268.387843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [268.391662] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0

<7> [268.391729] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [268.392064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [268.396302] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [268.396320] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<3> [268.404564] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [268.417799] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [268.417809] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [268.417813] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [268.417816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [268.418021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [268.418149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [268.418451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [268.418575] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [268.418597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [268.422775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [268.466911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [268.467087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [268.467236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [268.467392] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [268.467527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [268.468821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [268.810950] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<7> [269.037383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [269.041868] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<7> [269.042009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [269.042230] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [269.043377] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [269.043907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [269.044362] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [269.044657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [269.045031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [269.046137] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])

<7> [269.161061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [269.161455] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [269.162115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [269.162796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [269.163470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.164222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.164890] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.165531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.166178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [269.167741] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [269.168330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [269.169519] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [269.171590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [269.172204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [269.182432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [269.183022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [269.183264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [269.188998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<3> [269.194751] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [269.218626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [269.218637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [269.218640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [269.218644] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [269.218846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.218972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [269.219274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.219400] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.219422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [269.224680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [269.323046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [269.323818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [269.331036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [269.332572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [269.334064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [269.334932] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [269.335520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [269.336186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [269.398913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [269.399285] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [269.399944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [269.400577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [269.401283] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.401974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.402617] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.403300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.403934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [269.405252] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [269.405820] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [269.406941] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [269.408993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [269.409557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [269.418641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [269.418915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [269.419519] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [269.424237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [269.456178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [269.456188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [269.456192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [269.456195] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [269.456406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.456529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [269.457459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.457583] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.457606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [269.462347] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [269.531190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [269.531941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [269.537790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [269.539160] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [269.539398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [269.539682] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [269.539837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [269.540027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [269.634805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [269.635175] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [269.635835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [269.636473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [269.637183] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.637872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.638527] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.639202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.639837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [269.640499] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [269.641122] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [269.641814] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [269.643841] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [269.644399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [269.654731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [269.654973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [269.655578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [269.660233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [269.691403] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [269.691413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [269.691417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [269.691420] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [269.691623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.692106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [269.692423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.692549] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.692571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [269.697036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [269.762964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [269.763668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [269.769695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [269.771249] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [269.772016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [269.772808] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [269.773438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [269.774121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [269.869445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [269.869879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [269.870487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [269.871151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [269.871836] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.872505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.873199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.873863] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [269.874476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [269.875185] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [269.875766] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [269.876451] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [269.878529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [269.879135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [269.889428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [269.889655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [269.890290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [269.894985] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [269.927029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [269.927039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [269.927043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [269.927046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [269.927259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.927385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [269.927689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [269.928222] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [269.928244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [269.933073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [270.002887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.003585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.009498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.010942] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.011186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.011469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.011607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.011800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [270.104359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [270.104771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [270.105380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [270.106044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.106736] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.107429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.108112] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.108770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.109387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.110094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [270.110645] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [270.111404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.113464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [270.114052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [270.124346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [270.124588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.125201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [270.129826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [270.162342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [270.162352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.162356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [270.162359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [270.162568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.162697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [270.163326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.163453] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [270.163476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [270.168002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [270.235004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.235656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.242824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.244319] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.245086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.245892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.246505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.247202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [270.340273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [270.340645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [270.341334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [270.342005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.342673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.343392] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.344067] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.344731] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.345358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.346108] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [270.346665] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [270.347403] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.349461] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [270.350071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [270.360358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [270.360594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.361181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [270.365786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [270.397925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [270.397935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.397938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [270.397942] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [270.398157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.398279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [270.398581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.398988] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [270.399011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [270.403941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [270.466908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.467615] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.474795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.476306] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.477077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.477904] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.478491] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.479163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [270.574870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [270.575241] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [270.575909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [270.576596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.577353] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.578075] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.578751] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.579416] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.580095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.580814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [270.581369] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [270.582158] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.584219] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [270.584808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [270.595106] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [270.595289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.595839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [270.600476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [270.630449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [270.630460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.630463] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [270.630467] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [270.630685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.630822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [270.631140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.631267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [270.631291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [270.636198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [270.706858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.707127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.713951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.715361] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.715624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.715956] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.716094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.716267] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [270.809832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [270.810201] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [270.810871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [270.811550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [270.812309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.813028] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.813699] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.814375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [270.815053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [270.815784] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [270.816343] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [270.817134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [270.819195] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [270.819795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [270.830089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [270.830276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [270.830793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [270.835423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [270.866051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [270.866061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [270.866065] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [270.866068] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [270.866271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.866398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [270.866732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [270.866869] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [270.866891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [270.872190] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<6> [270.908069] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

<7> [270.938854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [270.939521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [270.946622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [270.948018] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [270.948277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [270.948559] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [270.948707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [270.948877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [271.044695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [271.045067] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [271.045708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [271.046397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.047144] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.047842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.048485] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.049184] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.049827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.050491] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [271.051130] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [271.051858] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.053925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [271.054485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [271.064804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [271.065010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [271.065632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [271.070362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [271.101499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [271.101509] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.101513] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [271.101516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [271.101736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.101865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [271.102174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.102301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [271.102324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [271.107210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [271.170878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [271.171575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [271.177582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [271.179103] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [271.179834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [271.180583] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [271.181192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [271.181811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [271.277842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [271.278209] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [271.278884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [271.279554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.280308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.281026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.281700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.282365] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.283044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.283770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [271.284321] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [271.285079] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.287139] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [271.287728] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [271.299231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [271.299419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [271.299938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [271.304564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [271.335445] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [271.335455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.335458] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [271.335461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [271.336622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.336767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [271.337077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.337203] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [271.337226] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [271.341534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [271.410920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [271.411663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [271.417540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [271.418916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [271.419163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [271.419445] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [271.419582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [271.419766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [271.514177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [271.514549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [271.515238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [271.515980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.516701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.517388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.518103] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.518760] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.519369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.520120] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [271.520699] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [271.521369] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.523469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [271.524090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [271.534434] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [271.534672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [271.535200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [271.539859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [271.571855] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [271.571865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.571869] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [271.571872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [271.572079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.572206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [271.572515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.572654] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [271.572692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [271.579057] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [271.642814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [271.643087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [271.648908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [271.650351] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [271.651101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [271.651892] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [271.652458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [271.653107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [271.749261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [271.749669] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [271.750278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [271.750955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.751704] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.752400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.753115] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.753791] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.754411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.755142] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [271.755748] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [271.756468] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.758580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [271.759193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [271.769563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [271.769865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [271.770387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [271.775045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [271.806902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [271.806912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [271.806915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [271.806919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [271.807130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.807250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [271.807553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [271.808045] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [271.808070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [271.812958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [271.882859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [271.883583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [271.888360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [271.889687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [271.889919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [271.890201] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [271.890338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [271.890508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [271.984266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [271.984685] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [271.985294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [271.985963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [271.986662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.987324] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.988011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.988666] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [271.989281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [271.990649] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [271.991202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [271.991913] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [271.993954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [271.994508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.003638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.003874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.004615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [272.009231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [272.040270] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.040279] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.040283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.040286] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.040493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.040966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.041272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.041396] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.041417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [272.045895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [272.114784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [272.115479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [272.121423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [272.122914] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [272.123666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [272.124413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [272.125010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [272.125657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [272.217431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [272.217894] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [272.218507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [272.219181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [272.219880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.220542] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.221231] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.221898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.222510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [272.223232] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [272.223842] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [272.224520] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [272.226605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [272.227167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.237453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.237727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.238284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [272.242893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [272.272326] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.272336] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.272340] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.272343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.272552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.273552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.273883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.274008] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.274029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [272.278432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [272.346791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [272.347484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [272.353428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [272.354924] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [272.355652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [272.356395] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [272.356993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [272.357638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [272.453478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [272.453947] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [272.454576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [272.455263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [272.456008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.456709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.457356] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.458055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.458696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [272.459364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [272.459993] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [272.460728] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [272.462790] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [272.463356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.474866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.475063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.475593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [272.480248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [272.510487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.510497] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.510501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.510504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.510904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.511035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.511343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.511470] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.511492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [272.517021] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [272.586753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [272.587452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [272.593432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [272.594833] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [272.595078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [272.595361] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [272.595499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [272.595681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [272.689744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [272.690114] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [272.690780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [272.691462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [272.692219] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.692937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.693618] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.694281] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.694959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [272.695652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [272.696203] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [272.696967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [272.699022] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [272.699601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.709886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.710113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.710678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [272.715269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [272.745078] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.745088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.745091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.745095] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.745309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.745431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.745977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.746104] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.746127] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [272.750764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [272.819669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [272.820367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [272.826299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [272.827771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [272.828483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [272.829374] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [272.829981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [272.830629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [272.924553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [272.924925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [272.925567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [272.926249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [272.926995] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.927690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.928341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.929049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.929693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [272.930354] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [272.930968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [272.931707] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [272.933767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [272.934322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.944680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.944913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.945578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [272.950181] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [272.982205] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.982215] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.982219] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.982222] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.982422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.983328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.983645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.983773] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.983798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [272.988269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [273.050732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [273.051437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [273.057423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [273.058813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [273.059091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [273.059374] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [273.059519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [273.059690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [273.160474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [273.160952] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [273.161588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [273.162271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [273.163026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.163723] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.164368] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.165086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.165740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [273.166405] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [273.167049] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [273.167803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [273.169864] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [273.170427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [273.180817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [273.181014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [273.181545] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [273.186220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [273.217214] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [273.217224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [273.217228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [273.217231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [273.217450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.218087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [273.218420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.219301] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [273.219329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [273.224214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [273.290685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [273.291389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [273.297351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [273.298849] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [273.299584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [273.300332] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [273.300943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [273.301576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [273.395590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [273.395960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [273.396630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [273.397308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [273.398057] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.398778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.399418] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.400134] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.400794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [273.401504] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [273.402091] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [273.402838] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [273.404912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [273.405503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [273.415809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [273.416064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [273.416651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [273.421260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [273.452239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [273.452250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [273.452254] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [273.452257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [273.452473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.452609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [273.452923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.453048] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [273.453070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [273.458007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [273.522671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [273.523374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [273.529334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [273.530731] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [273.530976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [273.531258] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [273.531394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [273.531575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [273.630585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [273.630956] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [273.631617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [273.632299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [273.633050] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.633770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.634424] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.635138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.635798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [273.636517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [273.637096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [273.637883] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [273.639937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [273.640532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [273.650823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [273.651049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [273.651671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [273.656363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [273.686145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [273.686155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [273.686159] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [273.686162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [273.686375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.686942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [273.687273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.687399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [273.687422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [273.691890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

<7> [273.762600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [273.762979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [273.769879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [273.771325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [273.772104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [273.772833] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [273.773406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [273.774082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [273.854035] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS

<7> [273.858161] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:400:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [273.858865] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [273.859403] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [273.860059] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:399:DDI TC1/PHY C] [CRTC:151:pipe A]

<7> [273.860738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [273.861334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [273.861979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [273.862625] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [273.863186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [273.863798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [273.864387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [273.865005] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [273.865623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [273.866169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [273.867117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [273.867934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [273.868532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [273.869050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [273.869594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [273.870123] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [273.870673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [273.871199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [273.871585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [273.871952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [273.872344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [273.872744] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [273.873119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [273.873491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [273.873861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [273.874212] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [273.874515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [273.874779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [273.875026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [273.875273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [273.875543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [273.875807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [273.876053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [273.876301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [273.876596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [273.876853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [273.877099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [273.877336] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset

<7> [273.877562] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [273.877731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [273.877899] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [273.878063] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [273.878225] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [273.878387] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [273.878573] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [273.878749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [273.878932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 559716 num active planes 1

<7> [273.879103] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [273.879272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [273.879476] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [273.879666] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [273.879835] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0

<7> [273.880011] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0

<7> [273.880187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]

<7> [273.880357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [273.880528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [273.880675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [273.880808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [273.880939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [273.881069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [273.881199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [273.881329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [273.881472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [273.881613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [273.881742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [273.881871] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [273.882000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [273.882128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [273.882256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [273.882386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [273.882569] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [273.882699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pixel rate 139929, min cdclk 69965, min voltage level 0

<7> [273.882828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [273.882956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [273.883083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 1920x1080+0+0

<7> [273.883211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [273.883340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [273.883486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [273.883625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [273.883754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [273.883882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [273.884009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [273.884137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.884264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.884391] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.884535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [273.884677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [273.884805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.884932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.885059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [273.885186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [273.885313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:416] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [273.885455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [273.885595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [273.885725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no

<7> [273.885851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no

<7> [273.885978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no

<7> [273.886106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no

<7> [273.886233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no

<7> [273.897651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [273.897739] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [273.897887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [273.898062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [273.898291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.898539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.898739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.898936] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [273.899113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [273.899588] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [273.899725] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [273.900015] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [273.900715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [273.900852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [273.907013] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [273.907189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [273.907319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [273.908202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [273.909840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [273.909998] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:389:DDI B/PHY B]

<7> [273.910135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:399:DDI TC1/PHY C]

<7> [273.910266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DDI TC2/PHY D]

<7> [273.910397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST A]

<7> [273.910566] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST B]

<7> [273.910700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:407:DP-MST C]

<7> [273.910871] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [273.911094] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]

<7> [273.911230] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [273.911443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [273.911617] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [273.912424] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [273.912573] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:35:plane 1A]

<7> [273.931757] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [273.932235] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]

<7> [273.933795] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [273.934033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:390:HDMI-A-1]

<7> [273.938441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:400:HDMI-A-2]

<7> [273.964244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [273.964253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [273.964256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD monitor fitHeadless4k

<7> [273.964259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:400:HDMI-A-2] ELD size 36, SAD count 0

<7> [273.964498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.964634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [273.964945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [273.965071] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [273.969650] Console: switching to colour frame buffer device 240x67

<7> [273.969626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:404:DP-1]

<7> [273.973818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:412:HDMI-A-3]

Results for igt@i915_pm_rpm@system-suspend-execbuf