Results for igt@kms_plane_scaling@plane-scaler-unity-scaling-with-modifiers

Result: Pass

integration-manifest git-log-oneline i915_display_info2 igt_runner2 runtimes2 results2.json results2-i915-load.json guc_logs2.tar i915_display_info_post_exec2 boot2 dmesg2

DetailValue
Duration 4.67 seconds
Hostname
shard-mtlp-1
Igt-Version
IGT-Version: 2.4-g5666b10ca (x86_64) (Linux: 7.0.0-rc6-CI_DRM_18270-g7b7e57c49dff+ x86_64)
Out
Using IGT_SRANDOM=1775193742 for randomisation
Opened device: /dev/dri/card0
Starting subtest: plane-scaler-unity-scaling-with-modifiers
Starting dynamic subtest: pipe-A
Trying on eDP-1
Dynamic subtest pipe-A: SUCCESS (0.384s)
Starting dynamic subtest: pipe-B
Trying on eDP-1
Dynamic subtest pipe-B: SUCCESS (1.416s)
Starting dynamic subtest: pipe-C
Trying on eDP-1
Dynamic subtest pipe-C: SUCCESS (1.425s)
Starting dynamic subtest: pipe-D
Trying on eDP-1
Dynamic subtest pipe-D: SUCCESS (1.440s)
Subtest plane-scaler-unity-scaling-with-modifiers: SUCCESS (4.668s)
Err
Starting subtest: plane-scaler-unity-scaling-with-modifiers
Starting dynamic subtest: pipe-A
Dynamic subtest pipe-A: SUCCESS (0.384s)
Starting dynamic subtest: pipe-B
Dynamic subtest pipe-B: SUCCESS (1.416s)
Starting dynamic subtest: pipe-C
Dynamic subtest pipe-C: SUCCESS (1.425s)
Starting dynamic subtest: pipe-D
Dynamic subtest pipe-D: SUCCESS (1.440s)
Subtest plane-scaler-unity-scaling-with-modifiers: SUCCESS (4.668s)
Dmesg
<6> [397.939458] Console: switching to colour dummy device 80x25
<6> [397.939804] [IGT] kms_plane_scaling: executing
<7> [397.943469] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [397.944843] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [397.967682] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [397.973209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [397.973221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [397.977458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [397.977709] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:530:DP-2]
<7> [397.977712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:530:DP-2]
<7> [397.977978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:530:DP-2] disconnected
<7> [397.978208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:DP-3]
<7> [397.978211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:539:DP-3]
<7> [397.978464] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:DP-3] disconnected
<7> [397.978700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-4]
<7> [397.978703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-4]
<7> [397.978954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-4] disconnected
<7> [397.979187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-5]
<7> [397.979190] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-5]
<7> [397.979427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-5] disconnected
<7> [397.979714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1]
<7> [397.979717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:508:eDP-1]
<7> [397.980314] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [397.980766] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [397.980891] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [397.981012] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
<7> [397.981162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [397.981168] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD monitor
<7> [397.981171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:508:eDP-1] ELD size 20, SAD count 0
<7> [397.981190] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] VRR capable: no
<7> [397.981310] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [397.981428] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:508:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [397.981975] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:508:eDP-1] probed modes:
<7> [397.981979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [397.981990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1]
<7> [397.981993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:517:DP-1]
<7> [397.986213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:517:DP-1] disconnected
<7> [397.986223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:530:DP-2]
<7> [397.986225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:530:DP-2]
<7> [397.986443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:530:DP-2] disconnected
<7> [397.986450] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:DP-3]
<7> [397.986453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:539:DP-3]
<7> [397.986678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:539:DP-3] disconnected
<7> [397.986686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-4]
<7> [397.986689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:548:DP-4]
<7> [397.986908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:548:DP-4] disconnected
<7> [397.986916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-5]
<7> [397.986918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:557:DP-5]
<7> [397.987137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:557:DP-5] disconnected
<6> [397.987378] [IGT] kms_plane_scaling: starting subtest plane-scaler-unity-scaling-with-modifiers
<6> [397.987821] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [397.988945] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.005167] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [398.005361] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.005391] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [398.005423] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.005575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.005705] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.005834] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.005957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.006093] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.006231] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.006366] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.006506] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.006642] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.006775] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.006941] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.016358] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.016922] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.017152] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.017681] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.018627] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.019002] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.019415] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.019815] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.020059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.020265] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.020547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.020749] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.020959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.027089] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.028480] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.028516] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [398.028548] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.028698] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.028833] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.028967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.029097] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.029238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.029386] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.029542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.029686] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.029829] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.029972] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.030151] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.039589] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.039852] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.039973] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.040129] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.040270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.040409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.040561] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.040712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.040865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.041015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.041163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.041310] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.041458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.049311] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.050947] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.050975] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:35:plane 1A] because [FB:568] is removed
<7> [398.051006] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.051144] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.051271] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.051396] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.051585] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.051721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.051860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.051994] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.052125] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.052256] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.052385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.052562] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.060637] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.060759] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.060977] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.061186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.061395] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.061624] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.061778] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.061939] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.062101] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.062262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.062424] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.062592] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.071565] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.072897] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.072927] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [398.072957] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.073105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.073254] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.073397] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.073539] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.073682] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.073836] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.073987] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.074132] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.074273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.074412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.074587] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.082865] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.083090] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.083200] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.083431] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.083646] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.083836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.083984] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.084138] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.084296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.084453] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.084630] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.084789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.084940] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.093745] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.095090] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.095121] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [398.095150] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.095288] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.095417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.095588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.095713] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.095843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.095979] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.096115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.096249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.096388] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.096534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.096699] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.105104] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.105389] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.105559] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.105817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.106066] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.106268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.106441] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.106648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.106840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.107027] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.107210] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.107393] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.107586] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.115977] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.117337] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.117366] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:65:plane 2A] because [FB:568] is removed
<7> [398.117396] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:65:plane 2A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.117564] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.117745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.117932] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.118120] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:65:plane 2A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.118320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.118525] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.118720] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.118915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.119106] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.119296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.119535] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.127459] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.127903] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.128436] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.129022] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.129539] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.130003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.130509] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.131011] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.131433] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.131739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.132013] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.132284] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.138206] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.139555] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.139584] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [398.139611] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.139749] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.139877] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.140002] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.140126] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.140259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.140399] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.140568] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.140760] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.140949] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.141139] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.141373] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.149605] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.150071] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.150272] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.150737] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.151057] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.151352] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.151659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.151967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.152350] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.152556] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.152688] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.152813] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.152937] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.153066] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.153237] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.153368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.153505] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.153640] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.153765] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.153893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.154032] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.154165] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.154296] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.154430] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.154577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.171536] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.173125] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.173166] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [398.173211] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.173419] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.173690] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.173883] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.174072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.174273] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.174503] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.174709] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.174907] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.175104] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.175300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.175551] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.183246] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.183499] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.183621] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.183837] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.184035] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.184227] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.184415] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.184631] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.184895] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.185084] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.185268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.185450] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.185645] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.185834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.186088] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.186275] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.186457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.186644] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.186827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.187015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.187220] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.187421] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.187624] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.187822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.188017] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.204863] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.206326] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.206363] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:95:plane 3A] because [FB:568] is removed
<7> [398.206398] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:95:plane 3A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.206659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.206831] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.206990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.207146] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:95:plane 3A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.207312] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.207498] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.207666] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.207834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.208000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.208160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.208329] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.216442] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.216725] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.216867] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.217002] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.217134] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.217265] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.217404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.217572] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.217716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.217858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.217997] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.218135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.227089] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.228437] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.228465] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [398.228743] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.228882] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.229015] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.229149] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.229280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.229418] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.229577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.229721] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.229862] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.230003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.230143] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.230311] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.238358] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.238554] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.238631] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.238772] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.238908] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.239042] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.239175] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.239316] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.239460] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.239630] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.239780] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.239923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.240065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.249289] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.250677] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.250706] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [398.250736] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.250880] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.251016] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.251152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.251282] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.251421] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.251577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.251722] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.251863] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.252003] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.252141] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.252309] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.261112] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.262023] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.262325] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.262880] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.263406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.263886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.264202] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.264548] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.264888] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.265226] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.265455] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.265668] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.265879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.282639] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.284368] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.284414] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:125:plane 4A] because [FB:568] is removed
<7> [398.284468] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:125:plane 4A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.284747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.284945] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.285137] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.285326] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:125:plane 4A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.285544] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.285755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.285960] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.286160] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.286357] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.286565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.286844] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.294186] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.294592] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.294980] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.295346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.295740] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.296049] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.296369] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.296722] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.297059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.297365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.297539] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.297699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.304851] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.306196] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.306227] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [398.306257] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.306406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.306559] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.306695] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.306828] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.306970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.307117] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.307262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.307404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.307556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.307698] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.307876] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.316368] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.316968] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.317238] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.317801] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.318289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.318775] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.319110] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.319409] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.319730] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.320035] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.320336] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.320643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.320869] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.338200] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.339553] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.339580] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [398.339607] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.339739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.339866] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.339993] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.340117] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.340250] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.340390] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.340544] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.340739] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.340981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.341172] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.341420] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [398.349708] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [398.350218] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.350461] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.350969] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.351263] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [398.351560] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [398.351851] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [398.352148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [398.352391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.352584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.352760] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.352932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.353103] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.360426] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [398.361758] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [398.361784] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:135:plane 5A] because [FB:568] is removed
<7> [398.361812] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:135:plane 5A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [398.361952] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [398.362089] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.362221] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.362351] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:135:plane 5A] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [398.362513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [398.362658] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [398.362799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [398.362939] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.363077] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [398.363215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [398.363384] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [398.371837] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [398.372345] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [398.373653] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:568]
<7> [398.374391] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [398.374571] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:269:pipe B] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [398.374763] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [398.374957] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [398.375154] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:269:pipe B]
<7> [398.375336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [398.375544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [398.375738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [398.375929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [398.376119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [398.376310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [398.376505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [398.376698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [398.376888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [398.377078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [398.377266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [398.377453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [398.377663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [398.377849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [398.378036] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [398.378222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [398.378409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [398.378634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [398.378833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [398.378976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [398.379117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [398.379255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [398.379393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [398.379540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [398.379680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [398.379818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [398.379957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [398.380095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [398.380230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [398.380366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [398.380506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [398.380641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [398.380777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [398.380912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [398.381046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [398.381180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [398.381313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [398.381447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [398.381616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [398.381755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [398.381891] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [398.382027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [398.382161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [398.382295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [398.382428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [398.382569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [398.382704] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [398.382837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [398.382969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [398.383101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [398.383234] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [398.383368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [398.383507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [398.383639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [398.383774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [398.383910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [398.384042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [398.384174] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [398.384306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [398.384438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [398.384581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [398.384718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [398.384854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [398.384988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [398.385122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [398.385255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [398.385387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [398.385526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [398.385658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [398.385790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [398.385922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [398.386054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [398.386186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [398.386319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [398.386451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [398.386595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [398.386731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dpll_hw_state
<7> [398.386864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7> [398.386996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [398.387129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c20pll_hw_state:
<7> [398.387260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [398.387393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [398.387532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[0] = 0x0000
<7> [398.387663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[1] = 0x0000
<7> [398.387795] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[2] = 0x0000
<7> [398.387927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[3] = 0x0000
<7> [398.388059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[4] = 0x0000
<7> [398.388191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[5] = 0x0000
<7> [398.388324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[6] = 0x0000
<7> [398.388454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[7] = 0x0000
<7> [398.388596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[8] = 0x0000
<7> [398.388728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[9] = 0x0000
<7> [398.388860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mpllb[10] = 0x0000
<7> [398.388991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [398.389122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7> [398.389253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [398.389385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes,
<7> [398.389527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1,
<7> [398.389663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0.
<7> [398.389797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state:
<7> [398.389928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21
<7> [398.390059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [398.390191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [398.390323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [398.390455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [398.390599] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [398.390732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [398.390863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [398.390996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [398.391128] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [398.391260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [398.391392] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset
<7> [398.391532] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:151:pipe A] releasing DPLL 0
<7> [398.391696] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [398.391829] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2
<7> [398.391960] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [398.392089] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [398.392215] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [398.392341] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [398.392467] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [398.392608] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [398.392735] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [398.392873] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [398.393012] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [398.393151] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [398.393288] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.393425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [398.393569] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [398.393717] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 256910 kHz -> 0 kHz
<7> [398.393852] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:269:pipe B] min cdclk: 0 kHz -> 256910 kHz
<7> [398.394018] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:269:pipe B] allocated DPLL 0
<7> [398.394159] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:269:pipe B] reserving DPLL 0
<7> [398.394299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: no [modeset]
<7> [398.394440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [398.394591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [398.394728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [398.394863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [398.394998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [398.395134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [398.395270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: yes [modeset]
<7> [398.395406] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [398.395548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [398.395686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [398.395823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [398.395957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [398.396090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [398.396222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [398.396356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [398.396492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [398.396624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [398.396757] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [398.396889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [398.397021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [398.397153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [398.397285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [398.397417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [398.397557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [398.397689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [398.397822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [398.397954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [398.398089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [398.398225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [398.398359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [398.398496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [398.398629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [398.398766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [398.398899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [398.399031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [398.399163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [398.399295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [398.399427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [398.399567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [398.399698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [398.399833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [398.399967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [398.400099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [398.400230] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [398.400362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [398.400496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [398.400628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [398.400759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [398.400890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [398.401021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [398.401152] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [398.401283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [398.401416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [398.401558] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [398.401690] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [398.401822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [398.401953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [398.402083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.402214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.402344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.402479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [398.402612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [398.402745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.402877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.403008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [398.403139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [398.403270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [FB:568] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [398.403402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [398.403541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [398.403674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no
<7> [398.403805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no
<7> [398.403937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no
<7> [398.404070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no
<7> [398.404202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no
<7> [398.410267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [398.410536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B
<7> [398.410734] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [398.411066] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [398.617848] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [398.618848] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [398.629147] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [398.629709] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [398.629454] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [398.630225] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [398.630329] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [398.680856] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [398.681376] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [398.681568] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [398.682265] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [398.683043] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [398.683449] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [398.683708] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [398.683986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [398.684426] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [398.685539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [398.685777] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [398.685970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [398.686223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [398.686564] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [398.686839] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [398.687092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:529:DDI TC1/PHY TC1]
<7> [398.687234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:531:DP-MST A]
<7> [398.687360] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DP-MST B]
<7> [398.687492] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DP-MST C]
<7> [398.687623] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST D]
<7> [398.687748] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DDI TC2/PHY TC2]
<7> [398.687875] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:540:DP-MST A]
<7> [398.688001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DP-MST B]
<7> [398.688128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DP-MST C]
<7> [398.688253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DP-MST D]
<7> [398.688380] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [398.688518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [398.688646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [398.688774] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [398.688905] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [398.689034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [398.689163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [398.689290] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [398.689418] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [398.689554] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [398.689682] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [398.689832] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:530:DP-2]
<7> [398.689979] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:539:DP-3]
<7> [398.690124] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-4]
<7> [398.690270] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-5]
<7> [398.690453] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [398.690671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [398.691518] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:269:pipe B]
<7> [398.691678] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [398.693662] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [398.693820] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [399.003750] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [399.003751] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [399.003920] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [399.003918] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [399.186059] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [399.225919] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [399.226565] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [399.227085] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [399.258629] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [399.259382] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [399.260034] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [399.260754] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [399.430373] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [399.431658] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [399.432313] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [399.436129] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [399.437742] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [399.438424] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [399.439428] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [399.440418] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [399.441338] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [399.441464] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [399.442779] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [399.442894] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [399.443480] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B
<7> [399.443733] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [399.443853] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe B
<7> [399.444025] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 4518
<7> [399.454917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [399.455088] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)
<7> [399.455289] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [399.455453] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.457494] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [399.458254] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B]
<7> [399.461829] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe B
<7> [399.462006] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:568] from all active usage due to RMFB ioctl
<7> [399.462041] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:568] is removed
<7> [399.462079] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.462217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.462350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.462498] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.462629] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.462770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.462915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.463059] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.463204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.463350] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.463501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.463688] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.466545] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.467131] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.467407] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.468021] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.468431] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.468827] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.469186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.469556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.469821] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.470018] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.470211] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.470403] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.470636] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.470770] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.470939] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.471066] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.471191] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.471317] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.471449] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.471579] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.471719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.471860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.471998] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.472134] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.472269] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.488316] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.489737] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.489777] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:569] is removed
<7> [399.489812] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.490039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.490259] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.490540] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.490760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.490983] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.491213] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.491404] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.491560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.491706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.491847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.492017] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.499774] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.499923] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.500005] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.500142] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.500273] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.500399] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.500546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.500769] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.501031] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.501189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.501319] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.501456] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.501578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.501705] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.501878] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.502007] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.502130] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.502252] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.502374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.502516] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.502654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.502791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.502929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.503062] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.503199] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.510438] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.511992] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.512019] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:569] is removed
<7> [399.512042] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:153:plane 1B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.512176] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.512306] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.512451] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.512579] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:153:plane 1B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.512713] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.512851] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.512990] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.513126] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.513259] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.513391] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.513565] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.521897] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.522076] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.522406] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.522747] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.523001] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.523246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.523523] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.523792] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.524058] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.524272] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.524412] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.524570] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.532665] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.534479] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.534512] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [399.534541] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.534684] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.534817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.534950] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.535081] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.535222] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.535369] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.535551] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.535696] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.535840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.535982] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.536160] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.544007] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.544158] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.544240] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.544380] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.544528] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.544717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.544899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.545093] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.545244] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.545382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.545533] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.545672] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.545809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.554896] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.556237] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.556265] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [399.556293] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.556425] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.556567] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.556693] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.556817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.557001] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.557139] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.557274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.557407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.557553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.557684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.557848] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.566236] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.566498] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.566603] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.566814] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.567030] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.567243] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.567477] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.567701] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.567931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.568168] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.568365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.568514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.568654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.577122] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.578463] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.578491] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:569] is removed
<7> [399.578519] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:183:plane 2B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.578655] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.578789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.578912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.579033] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:183:plane 2B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.579162] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.579298] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.579443] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.579576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.579710] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.579843] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.580003] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.588558] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.588643] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.588780] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.588911] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.589037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.589162] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.589297] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.589487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.589628] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.589766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.589904] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.590039] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.599352] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.600911] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.600998] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [399.601069] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.601597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.602058] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.602483] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.602872] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.603302] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.603606] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.603839] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.604064] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.604289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.604545] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.604822] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.610638] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.610789] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.610869] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.611003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.611131] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.611259] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.611384] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.611562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.611767] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.611914] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.612048] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.612212] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.612346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.621540] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.622851] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.622887] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [399.622919] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.623069] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.623198] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.623325] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.623472] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.623614] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.623755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.623889] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.624023] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.624155] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.624287] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.624470] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.632904] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.633059] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.633136] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.633278] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.633417] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.633612] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.633745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.633884] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.634022] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.634176] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.634332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.634493] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.634636] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.643769] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.645174] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.645203] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:569] is removed
<7> [399.645231] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:213:plane 3B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.645376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.645524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.645660] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.645791] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:213:plane 3B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.645927] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.646065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.646200] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.646336] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.646552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.646684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.646845] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.655088] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.655228] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.655475] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.655691] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.655894] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.656085] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.656289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.656589] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.656787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.656980] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.657170] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.657363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.657560] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.657703] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.657846] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.657986] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.658146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.658286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.666016] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.667368] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.667396] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [399.667424] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.667588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.667729] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.667860] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.667989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.668127] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.668274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.668419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.668576] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.668725] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.668865] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.669036] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.677322] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.677558] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.677653] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.677814] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.677968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.678119] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.678268] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.678420] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.678649] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.678779] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.678902] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.679025] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.679147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.679286] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.679503] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.679626] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.679746] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.679867] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.679987] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.680110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.680246] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.680382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.680537] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.680680] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.680811] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.688236] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.689596] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.689623] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [399.689651] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.689788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.689914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.690038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.690160] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.690290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.690425] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.690581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.690730] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.690863] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.690999] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.691165] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.699576] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.699820] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.699951] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.700177] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.700362] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.700570] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.700751] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.700944] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.701146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.701345] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.701537] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.701684] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.701827] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.710476] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.711830] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.711859] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:569] is removed
<7> [399.711886] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:243:plane 4B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.712027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.712162] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.712294] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.712425] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:243:plane 4B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.712591] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.712742] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.712889] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.713035] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.713181] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.713322] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.713500] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.721839] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.721945] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.722112] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.722262] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.722409] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.722597] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.722751] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.722893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.723030] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.723167] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.723324] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.723472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.732694] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.734005] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.734035] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [399.734067] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.734220] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.734350] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.734542] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.734667] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.734803] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.734941] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.735078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.735214] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.735349] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.735500] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.735673] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.743997] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.744238] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.744350] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.744593] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.744804] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.745003] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.745200] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.745413] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.745671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.745819] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.745959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.746107] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.746257] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.754896] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.756298] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.756328] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [399.756357] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.756527] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.756674] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.756845] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.757052] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.757289] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.757460] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.757616] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.757762] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.757908] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.758053] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.758232] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [399.766368] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [399.766628] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.766732] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [399.766922] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.767106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [399.767286] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [399.767484] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [399.767689] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 2055280 num active planes 1
<7> [399.767846] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.768006] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.768208] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.768377] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.768541] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.777122] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [399.778669] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [399.778698] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:569] is removed
<7> [399.778725] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:253:plane 5B] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0
<7> [399.778855] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [399.778979] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.779102] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.779224] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:253:plane 5B] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [399.779354] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:269:pipe B] data rate 0 num active planes 0
<7> [399.779505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [399.779656] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [399.779799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.779930] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [399.780060] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [399.780221] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<6> [399.788698] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [399.789395] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [399.790664] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:569]
<7> [399.791415] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [399.791615] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:387:pipe C] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [399.791756] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [399.791889] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder C
<7> [399.792033] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [399.792182] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:387:pipe C]
<7> [399.792318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [399.792477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [399.792628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [399.792774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [399.792918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [399.793058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [399.793197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [399.793337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [399.793487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [399.793626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [399.793764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [399.793901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [399.794037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [399.794173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [399.794309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [399.794447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [399.794582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [399.794719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [399.794854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [399.794992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [399.795129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [399.795265] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [399.795401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [399.795589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [399.795725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [399.795859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [399.795993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [399.796126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [399.796259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [399.796394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [399.796542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [399.796679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [399.796814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [399.796948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [399.797081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [399.797215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [399.797349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [399.797495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [399.797633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [399.797769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:269:pipe B] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [399.797906] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset
<7> [399.798040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [399.798176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [399.798310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [399.798446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [399.798580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [399.798713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [399.798847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [399.798981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [399.799114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [399.799247] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [399.799380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [399.799524] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [399.799658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [399.799790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [399.799925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [399.800058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [399.800192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [399.800327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [399.800487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [399.800622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [399.800757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [399.800889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [399.801023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [399.801155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [399.801287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [399.801423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [399.801571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [399.801706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [399.801840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [399.801973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [399.802105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [399.802238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [399.802371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [399.802516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [399.802650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [399.802783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dpll_hw_state
<7> [399.802917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7> [399.803053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [399.803189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c20pll_hw_state:
<7> [399.803322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [399.803461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [399.803600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[0] = 0x0000
<7> [399.803734] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[1] = 0x0000
<7> [399.803868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[2] = 0x0000
<7> [399.804001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[3] = 0x0000
<7> [399.804133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[4] = 0x0000
<7> [399.804266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[5] = 0x0000
<7> [399.804397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[6] = 0x0000
<7> [399.804547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[7] = 0x0000
<7> [399.804679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[8] = 0x0000
<7> [399.804811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[9] = 0x0000
<7> [399.804944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mpllb[10] = 0x0000
<7> [399.805076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [399.805207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7> [399.805339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [399.805484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes,
<7> [399.805615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1,
<7> [399.805747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0.
<7> [399.805882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state:
<7> [399.806015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21
<7> [399.806147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [399.806280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [399.806412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [399.806562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [399.806696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [399.806828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [399.806960] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [399.807093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [399.807224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [399.807356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [399.807499] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [399.807639] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:269:pipe B] releasing DPLL 0
<7> [399.807809] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [399.807944] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [399.808078] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:387:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [399.808213] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:263:cursor B] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0
<7> [399.808345] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [399.808489] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:381:cursor C] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [399.808615] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [399.808741] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [399.808867] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [399.808993] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [399.809132] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [399.809275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [399.809417] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [399.809568] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.809706] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [399.809840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [399.809975] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:269:pipe B] min cdclk: 256910 kHz -> 0 kHz
<7> [399.810111] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:387:pipe C] min cdclk: 0 kHz -> 256910 kHz
<7> [399.810278] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:387:pipe C] allocated DPLL 0
<7> [399.810417] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:387:pipe C] reserving DPLL 0
<7> [399.810576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:269:pipe B] enable: no [modeset]
<7> [399.810719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:153:plane 1B] fb: [NOFB], visible: no
<7> [399.810857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:183:plane 2B] fb: [NOFB], visible: no
<7> [399.810994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:213:plane 3B] fb: [NOFB], visible: no
<7> [399.811130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:243:plane 4B] fb: [NOFB], visible: no
<7> [399.811266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:253:plane 5B] fb: [NOFB], visible: no
<7> [399.811403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:263:cursor B] fb: [NOFB], visible: no
<7> [399.811554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: yes [modeset]
<7> [399.811692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [399.811829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [399.811964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [399.812098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [399.812232] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [399.812366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [399.812512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [399.812646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [399.812780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [399.812914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [399.813047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [399.813180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [399.813313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [399.813459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [399.813598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [399.813733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [399.813866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [399.813999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [399.814132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [399.814265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [399.814397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [399.814545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [399.814679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [399.814812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [399.814944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [399.815077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [399.815210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [399.815343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [399.815485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [399.815623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [399.815758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [399.815891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [399.816025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [399.816158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [399.816291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [399.816424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [399.816574] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [399.816711] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [399.816843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [399.816975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [399.817106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [399.817238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [399.817370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [399.817515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [399.817650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [399.817784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [399.817919] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [399.818053] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [399.818186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [399.818318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [399.818460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.818596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.818728] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.818860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [399.818993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [399.819125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.819257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.819390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [399.819542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [399.819677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [FB:569] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [399.819810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [399.819943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [399.820076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [399.820209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [399.820340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [399.820487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [399.820619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [399.826460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C
<7> [399.826687] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [399.827008] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [400.033824] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [400.034821] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B
<7> [400.045037] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [400.045594] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [400.045383] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [400.046122] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [400.046178] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [400.098178] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [400.098990] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [400.099644] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [400.100199] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [400.100871] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:269:pipe B]
<7> [400.101039] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [400.101662] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [400.102779] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [400.103492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [400.103917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [400.104207] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [400.104515] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [400.104799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [400.105182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [400.105535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [400.105958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:529:DDI TC1/PHY TC1]
<7> [400.106286] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:531:DP-MST A]
<7> [400.106474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DP-MST B]
<7> [400.106646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DP-MST C]
<7> [400.106779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST D]
<7> [400.106914] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DDI TC2/PHY TC2]
<7> [400.107042] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:540:DP-MST A]
<7> [400.107169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DP-MST B]
<7> [400.107298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DP-MST C]
<7> [400.107434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DP-MST D]
<7> [400.107563] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [400.107772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [400.107965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [400.108104] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [400.108238] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [400.108371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [400.108510] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [400.108710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [400.108884] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [400.109054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [400.109209] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [400.109482] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:530:DP-2]
<7> [400.109646] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:539:DP-3]
<7> [400.109800] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-4]
<7> [400.109952] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-5]
<7> [400.110143] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [400.110302] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [400.110498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [400.111489] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:387:pipe C]
<7> [400.111655] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [400.114155] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [400.114318] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)
<7> [400.609917] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [400.663846] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [400.664461] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [400.665014] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [400.696473] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [400.697340] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [400.697983] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [400.698716] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [400.869011] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [400.869736] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [400.870289] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [400.873642] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [400.875114] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [400.875853] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [400.876831] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [400.877810] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [400.878717] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [400.878841] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [400.880085] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [400.880206] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [400.880782] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe C
<7> [400.881022] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [400.881139] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe C
<7> [400.881318] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 4518
<7> [400.892202] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xd
<7> [400.892507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B
<7> [400.892656] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [400.892853] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:269:pipe B]
<7> [400.893009] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [400.894197] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [400.894384] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C]
<7> [400.897454] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe C
<7> [400.897619] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:569] from all active usage due to RMFB ioctl
<7> [400.897657] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:569] is removed
<7> [400.897696] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [400.897824] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [400.897952] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.898093] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.898217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.898355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [400.898540] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [400.898680] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [400.898813] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.898947] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.899075] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [400.899248] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [400.903550] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [400.903713] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [400.903809] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.903956] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.904096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.904233] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.904366] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.904552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.904703] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [400.904850] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [400.904994] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.905138] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.905281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [400.914433] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [400.915490] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [400.915519] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:570] is removed
<7> [400.915547] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [400.915690] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [400.915826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.915964] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.916099] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.916239] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [400.916385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [400.916549] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [400.916691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.916830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.916967] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [400.917137] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [400.925617] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [400.925764] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [400.925836] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.925972] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.926108] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [400.926244] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [400.926376] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [400.926557] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.926702] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [400.926844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [400.926984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.927148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.927364] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [400.936603] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [400.937645] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [400.937671] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:570] is removed
<7> [400.937697] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:271:plane 1C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [400.937838] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [400.937979] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.938119] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.938253] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:271:plane 1C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.938421] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [400.938563] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [400.938708] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [400.938847] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.938978] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.939108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [400.939270] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [400.947946] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [400.948114] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.948360] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.948636] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.948839] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.949039] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.949255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.949551] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.949752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.949951] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.950129] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.950256] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.950386] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.950542] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [400.950688] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [400.950831] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.950971] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.951110] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [400.958863] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [400.959956] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [400.959985] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [400.960014] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [400.960178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [400.960333] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.960490] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.960634] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.960779] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [400.960928] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [400.961072] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [400.961216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.961362] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.961521] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [400.961695] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [400.970171] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [400.970323] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [400.970398] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.970551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.970687] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.970816] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.970942] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.971077] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.971249] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.971374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.971514] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.971638] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.971760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.971886] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.972047] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.972171] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.972294] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [400.972422] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [400.972546] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [400.972673] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.972810] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [400.972947] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [400.973083] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.973218] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.973350] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [400.981074] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [400.982164] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [400.982189] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [400.982215] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [400.982348] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [400.982497] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.982622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.982745] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [400.982877] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [400.983015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [400.983150] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [400.983284] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.983423] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [400.983556] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [400.983713] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [400.992384] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [400.992583] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [400.992667] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [400.992832] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [400.992990] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [400.993145] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [400.993298] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [400.993497] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [400.993697] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [400.993868] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [400.994037] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.994180] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [400.994320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.003292] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.004377] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.004421] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:301:plane 2C] because [FB:570] is removed
<7> [401.004451] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:301:plane 2C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.004592] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.004739] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.004886] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.005026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:301:plane 2C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.005167] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.005310] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.005463] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.005608] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.005748] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.005891] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.006057] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.014824] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.014926] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.015055] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.015179] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.015300] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.015433] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.015565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.015702] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.015837] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.015970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.016103] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.016236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.025513] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.027048] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.027074] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [401.027102] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.027231] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.027359] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.027510] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.027637] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.027772] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.027915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.028058] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.028204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.028347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.028488] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.028643] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.036721] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.036873] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.036949] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.037147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.037326] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.037492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.037714] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.037861] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.038010] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.038156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.038300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.038455] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.038601] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.047715] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.048764] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.048794] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [401.048823] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.048964] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.049098] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.049231] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.049361] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.049540] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.049688] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.049831] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.049973] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.050115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.050257] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.050448] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.059165] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.059310] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.059386] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.059541] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.059682] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [401.059809] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [401.059933] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [401.060065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.060204] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.060341] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.060488] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.060624] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.060758] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.069961] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.071385] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.071425] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:331:plane 3C] because [FB:570] is removed
<7> [401.071452] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:331:plane 3C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.071584] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.071708] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.071833] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.071957] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:331:plane 3C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.072088] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.072222] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.072355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.072512] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.072643] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.072773] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.072931] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.081262] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.081350] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.081515] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.081717] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.082002] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.082232] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.082472] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.082689] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.082893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.083096] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.083300] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.083539] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.092185] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.093794] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.093887] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [401.093967] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.094494] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.095027] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.095578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.095870] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.096179] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.096439] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.096625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.096807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.096989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.097171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.097389] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.103512] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.103683] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.103772] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.103946] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.104111] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.104274] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.104457] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.104633] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.104807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.104949] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.105081] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.105215] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.105348] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.114445] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.115475] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.115505] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [401.115532] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.115663] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.115787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.115910] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.116038] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.116173] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.116308] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.116452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.116586] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.116716] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.116845] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.117003] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.125818] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.126311] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.126550] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.126967] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.127369] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [401.127635] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [401.127872] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [401.128123] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.128429] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.128578] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.128725] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [401.128875] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [401.129026] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [401.129180] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.129374] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.129533] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.129680] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [401.129822] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [401.129948] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [401.130078] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.130220] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.130361] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.130513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.130653] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.130791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.136714] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.137798] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.137826] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:361:plane 4C] because [FB:570] is removed
<7> [401.137854] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:361:plane 4C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.138005] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.138152] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.138294] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.138438] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:361:plane 4C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.138577] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.138724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.138868] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.139014] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.139156] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.139294] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.139473] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.147952] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.148102] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.148361] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.148650] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.148899] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.149083] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.149274] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.149543] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.149722] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.149896] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.150070] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.150246] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.150367] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.150547] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.150667] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.150787] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.150906] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.151022] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.151143] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.151275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.151411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.151541] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.151670] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.151799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.158865] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.159916] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.159945] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [401.159973] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.160110] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.160245] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.160374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.160513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.160651] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.160797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.160932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.161065] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.161196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.161327] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.161494] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.170213] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.170470] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.170573] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.170782] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.170983] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.171182] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.171368] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.171529] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.171679] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.171824] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.171966] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.172108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.172249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.181073] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.182140] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.182169] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [401.182198] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.182346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.182512] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.182659] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.182793] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.182935] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.183084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.183231] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.183378] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.183536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.183685] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.183858] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [401.192429] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [401.192693] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.192816] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.193068] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.193309] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [401.193588] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [401.193817] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [401.194060] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 2055280 num active planes 1
<7> [401.194209] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.194352] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.194505] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.194644] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.194782] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.203295] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [401.204348] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [401.204376] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:371:plane 5C] because [FB:570] is removed
<7> [401.204415] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:371:plane 5C] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [401.204552] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [401.204680] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.204806] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.204931] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:371:plane 5C] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [401.205069] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [401.205207] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [401.205346] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [401.205490] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.205622] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [401.205755] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [401.205915] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [401.215012] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [401.215872] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [401.217549] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:570]
<7> [401.218248] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [401.218440] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:505:pipe D] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [401.218578] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [401.218712] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR2 not supported in transcoder D
<7> [401.218858] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [401.219006] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:505:pipe D]
<7> [401.219138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [401.219284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [401.219439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [401.219583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [401.219726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [401.219868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [401.220008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [401.220148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [401.220287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [401.220432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [401.220571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [401.220709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [401.220848] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [401.220988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [401.221125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [401.221264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [401.221409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [401.221558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [401.221695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [401.221834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [401.221978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [401.222125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [401.222273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [401.222422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [401.222562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [401.222702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [401.222841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [401.222984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [401.223139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [401.223282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [401.223430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [401.223568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [401.223706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [401.223843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [401.223984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [401.224121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [401.224258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [401.224394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [401.224545] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [401.224682] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:387:pipe C] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [401.224818] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [401.224955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [401.225092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [401.225228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [401.225363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [401.225510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [401.225647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [401.225782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [401.225919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [401.226055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [401.226190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [401.226326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [401.226492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [401.226634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [401.226773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [401.226911] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [401.227047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [401.227187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [401.227324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [401.227475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [401.227613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [401.227749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [401.227885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [401.228022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [401.228157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [401.228293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [401.228435] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [401.228572] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [401.228708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [401.228844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [401.228980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [401.229116] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [401.229251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [401.229392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [401.229592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [401.229731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [401.229875] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in dpll_hw_state
<7> [401.230013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:
<7> [401.230151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [401.230288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c20pll_hw_state:
<7> [401.230428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [401.230563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [401.230699] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[0] = 0x0000
<7> [401.230834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[1] = 0x0000
<7> [401.230969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[2] = 0x0000
<7> [401.231103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[3] = 0x0000
<7> [401.231238] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[4] = 0x0000
<7> [401.231373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[5] = 0x0000
<7> [401.231526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[6] = 0x0000
<7> [401.231662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[7] = 0x0000
<7> [401.231798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[8] = 0x0000
<7> [401.231933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[9] = 0x0000
<7> [401.232070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mpllb[10] = 0x0000
<7> [401.232208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [401.232407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:
<7> [401.232578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [401.232716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes,
<7> [401.232859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1,
<7> [401.232994] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0.
<7> [401.233129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state:
<7> [401.233264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21
<7> [401.233399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [401.233551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [401.233686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [401.233821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [401.233955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [401.234091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [401.234226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [401.234361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [401.234511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [401.234647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [401.234783] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] fastset requirement not met, forcing full modeset
<7> [401.234919] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:387:pipe C] releasing DPLL 0
<7> [401.235109] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xd -> 0x3 (total dbuf slices 0xf), mbus joined? no->no
<7> [401.235254] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:387:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [401.235386] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:505:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [401.235538] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:381:cursor C] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [401.235670] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [401.235799] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:499:cursor D] ddb ( 0 - 0) -> (1953 - 2048), size 0 -> 95
<7> [401.235927] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [401.236056] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [401.236185] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [401.236316] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [401.236466] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [401.236612] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [401.236754] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [401.236896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.237038] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [401.237177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [401.237330] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:387:pipe C] min cdclk: 256910 kHz -> 0 kHz
<7> [401.237481] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:505:pipe D] min cdclk: 0 kHz -> 256910 kHz
<7> [401.237656] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:505:pipe D] allocated DPLL 0
<7> [401.237828] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:505:pipe D] reserving DPLL 0
<7> [401.237985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:387:pipe C] enable: no [modeset]
<7> [401.238127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:271:plane 1C] fb: [NOFB], visible: no
<7> [401.238270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [401.238413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [401.238553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [401.238694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [401.238836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [401.238974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:505:pipe D] enable: yes [modeset]
<7> [401.239113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [401.239249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: D, pipe bpp: 30, dithering: 0
<7> [401.239385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [401.239540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [401.239677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [401.239813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [401.239949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [401.240084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [401.240219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [401.240353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [401.240517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [401.240692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [401.240826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [401.240962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8
<7> [401.241096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [401.241231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [401.241365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [401.241512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [401.241648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [401.241783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [401.241916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [401.242050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [401.242187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [401.242324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [401.242479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [401.242615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [401.242751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [401.242887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [401.243022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [401.243168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [401.243340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [401.243489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [401.243623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [401.243760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [401.243897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [401.244033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [401.244167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [401.244303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [401.244447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [401.244582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [401.244716] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [401.244850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [401.244984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [401.245118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [401.245252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [401.245386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [401.245535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [401.245671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [401.245831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [401.245978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [401.246113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.246249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.246386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.246536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [401.246671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [401.246806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.246940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.247074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [401.247207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [401.247341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:389:plane 1D] fb: [FB:570] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [401.247489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [401.247624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [401.247759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:419:plane 2D] fb: [NOFB], visible: no
<7> [401.247894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 3D] fb: [NOFB], visible: no
<7> [401.248028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 4D] fb: [NOFB], visible: no
<7> [401.248163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:489:plane 5D] fb: [NOFB], visible: no
<7> [401.248300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:499:cursor D] fb: [NOFB], visible: no
<7> [401.254217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D
<7> [401.254520] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [401.255229] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [401.457613] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [401.458495] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe C
<7> [401.471045] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [401.471610] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [401.471359] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [401.472122] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [401.472243] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [401.524119] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [401.524894] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [401.525550] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [401.529513] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [401.530021] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:387:pipe C]
<7> [401.530159] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [401.530692] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [401.531876] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [401.532442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [401.532992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [401.533297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [401.533540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [401.533965] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [401.534462] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [401.534714] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [401.534903] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:529:DDI TC1/PHY TC1]
<7> [401.535071] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:531:DP-MST A]
<7> [401.535226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DP-MST B]
<7> [401.535364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DP-MST C]
<7> [401.535500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST D]
<7> [401.535622] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DDI TC2/PHY TC2]
<7> [401.535750] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:540:DP-MST A]
<7> [401.535880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DP-MST B]
<7> [401.536023] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DP-MST C]
<7> [401.536192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DP-MST D]
<7> [401.536371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [401.536523] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [401.536642] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [401.536764] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [401.536886] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [401.537006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [401.537123] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [401.537241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [401.537360] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [401.537498] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [401.537670] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:517:DP-1]
<7> [401.537849] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:530:DP-2]
<7> [401.537989] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:539:DP-3]
<7> [401.538135] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:548:DP-4]
<7> [401.538276] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:557:DP-5]
<7> [401.538471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [401.538704] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [401.538912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [401.540264] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x8, on? 0) for [CRTC:505:pipe D]
<7> [401.540466] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [401.542684] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [401.542827] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [402.033892] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [402.098912] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [402.099593] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [402.100115] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [402.131636] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [402.132362] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [402.133008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [402.133727] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [402.306920] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [402.307673] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [402.308257] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [402.313512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [402.315024] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [402.315883] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [402.317216] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [402.318256] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [402.319292] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [402.319532] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [402.320918] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [402.321054] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [402.321655] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe D
<7> [402.321919] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [402.322052] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe D
<7> [402.322234] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 4518
<7> [402.333080] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3
<7> [402.333383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C
<7> [402.333561] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [402.333789] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:387:pipe C]
<7> [402.333956] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.335128] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [402.335338] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:505:pipe D]
<7> [402.338069] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000061 0x13421c72)
<7> [402.338603] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe D
<7> [402.338769] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:570] from all active usage due to RMFB ioctl
<7> [402.338803] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:570] is removed
<7> [402.338844] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.338981] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.339113] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.339245] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.339374] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.339537] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.339682] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.339823] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.339963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.340100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.340238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.340427] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.344424] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.344576] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.344661] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.344801] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.344934] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.345063] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.345190] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.345328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.345498] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.345640] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.345777] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.345915] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.346063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.355309] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.356423] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.356453] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:571] is removed
<7> [402.356482] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.356621] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.356752] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.356877] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.357000] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.357132] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.357268] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.357414] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.357552] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.357685] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.357817] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.357978] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.366716] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.366885] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.366971] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.367115] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.367252] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.367387] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.367551] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.367719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.367872] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.368018] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.368162] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.368304] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.368456] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.377504] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.378582] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.378614] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:389:plane 1D] because [FB:571] is removed
<7> [402.378642] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:389:plane 1D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.378785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.378921] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.379054] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.379187] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:389:plane 1D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.379333] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.379504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.379654] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.379799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.379943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.380084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.380261] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.388854] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.388956] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.389110] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.389238] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.389365] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.389519] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.389663] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.389809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.389948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.390086] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.390221] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.390355] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.399761] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.400867] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.400898] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [402.400927] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.401074] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.401217] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.401346] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.401520] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.401659] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.401799] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.401937] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.402073] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.402213] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.402345] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.402517] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.411095] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.411259] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.411347] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.411529] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.411691] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.411826] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.411958] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.412102] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.412255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.412407] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.412553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.412699] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.412844] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.421979] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.423076] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.423107] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [402.423133] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.423280] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.423442] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.423582] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.423714] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.423856] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.424002] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.424148] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.424291] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.424504] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.424648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.424823] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.433258] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.433447] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.433568] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.433785] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.433917] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.434050] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.434186] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.434334] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.434528] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.434664] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.434788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.434912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.435037] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.435163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.435336] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.435479] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.435602] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.435726] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.435849] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.435979] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.436127] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.436266] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.436409] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.436550] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.436687] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.444197] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.445279] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.445305] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:419:plane 2D] because [FB:571] is removed
<7> [402.445332] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:419:plane 2D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.445503] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.445650] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.445777] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.445901] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:419:plane 2D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.446036] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.446171] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.446305] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.446458] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.446590] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.446719] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.446885] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.455520] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.455605] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.455754] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.455892] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.456028] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.456162] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.456304] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.456535] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.456701] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.456836] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.456972] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.457106] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.457242] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.457435] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.457575] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.457707] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.457840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.457971] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.458105] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.458249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.458401] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.458553] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.458697] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.458840] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.466407] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.467484] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.467515] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [402.467549] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.467712] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.467840] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.467968] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.468096] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.468238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.468385] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.468548] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.468690] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.468831] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.468974] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.469148] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.477622] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.477770] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.477842] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.477976] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.478105] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.478236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.478363] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.478524] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.478673] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.478812] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.478947] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.479082] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.479216] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.488616] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.489673] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.489701] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [402.489729] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.489864] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.489989] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.490113] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.490236] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.490369] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.490529] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.490665] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.490798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.490928] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.491057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.491214] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.499985] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.500137] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.500221] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.500357] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.500526] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.500662] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.500788] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.500926] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.501067] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.501205] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.501347] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.501494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.501632] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.510867] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.511988] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.512017] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:449:plane 3D] because [FB:571] is removed
<7> [402.512044] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:449:plane 3D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.512178] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.512311] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.512492] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.512622] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:449:plane 3D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.512753] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.512885] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.513018] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.513149] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.513276] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.513428] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.513588] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.522149] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.522233] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.522373] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.522524] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.522658] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.522789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.522923] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.523063] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.523198] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.523328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.523469] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.523603] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.533078] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.534138] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.534169] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [402.534196] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.534333] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.534475] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.534604] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.534728] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.534862] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.535000] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.535136] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.535275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.535415] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.535547] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.535710] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.544414] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.544603] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.544689] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.544820] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.544947] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.545072] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.545196] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.545328] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.545486] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.545625] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.545766] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.545899] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.546031] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.555314] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.556434] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.556469] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [402.556498] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.556630] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.556760] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.556883] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.557004] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.557135] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.557270] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.557411] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.557544] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.557676] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.557807] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.557967] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.566819] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.566967] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.567053] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.567189] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.567320] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.567466] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.567654] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.567920] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.568196] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.568417] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.568607] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.568798] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.568989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.577693] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.578729] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.578755] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:479:plane 4D] because [FB:571] is removed
<7> [402.578781] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:479:plane 4D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.578913] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.579040] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.579166] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.579289] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:479:plane 4D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.579446] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.579649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.579888] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.580115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.580337] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.580565] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.580805] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.588788] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.588914] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.589148] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.589370] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.589616] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.589872] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.590130] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.590334] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.590476] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.590610] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.590741] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.590871] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.599751] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.600840] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.600870] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [402.600898] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.601032] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.601157] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.601281] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.601480] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.601617] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.601757] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.601894] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.602030] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.602163] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.602295] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.602474] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.611093] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.611261] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.611351] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.611548] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.611764] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.611952] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.612138] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.612339] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.612616] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.612805] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.612985] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.613165] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.613344] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.613546] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.613784] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.613963] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.614142] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.614321] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.614518] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.614703] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.614896] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.615089] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.615281] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.615468] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.615602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.621978] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.623070] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.623099] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [402.623126] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.623266] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.623420] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.623554] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.623680] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.623816] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.623956] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.624094] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.624231] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.624366] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.624518] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.624685] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<7> [402.633356] i915 0000:00:02.0: [drm:i915_dpt_create [i915]] Allocating dpt from smem
<7> [402.633674] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<7> [402.633809] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.634080] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.634279] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.634498] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.634698] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.634901] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.635176] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.635349] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.635481] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.635611] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.635732] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.635856] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.636021] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 0) -> ( 0 - 1953), size 0 -> 1953
<7> [402.636143] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.636264] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0
<7> [402.636385] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197
<7> [402.636522] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198
<7> [402.636653] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 2055280 num active planes 1
<7> [402.636785] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.636919] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.637050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.637180] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.637309] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.644200] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1
<7> [402.645292] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:571] from all active usage due to RMFB ioctl
<7> [402.645327] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:489:plane 5D] because [FB:571] is removed
<7> [402.645353] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:489:plane 5D] ddb ( 0 - 1953) -> ( 0 - 0), size 1953 -> 0
<7> [402.645513] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [402.645651] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] lines 4, 16, 16, 19, 19, 28, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.645789] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] blocks 92, 365, 365, 434, 434, 638, 0, 0, 197, 92, 197 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.645914] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:489:plane 5D] min_ddb 183, 456, 456, 547, 547, 729, 0, 0, 198, 183, 198 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [402.646041] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:505:pipe D] data rate 0 num active planes 0
<7> [402.646174] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 0 qgv_peak_bw: 51200
<7> [402.646304] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 0 qgv_peak_bw: 51200
<7> [402.646452] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.646584] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 51200
<7> [402.646717] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0
<7> [402.646880] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
<6> [402.655744] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [402.656336] [IGT] kms_plane_scaling: finished subtest plane-scaler-unity-scaling-with-modifiers, SUCCESS
<7> [402.656967] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:571]
<6> [402.657504] [IGT] kms_plane_scaling: exiting, ret=0
<7> [402.657991] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [402.667042] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:508:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [402.667203] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:507:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [402.667330] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 1926825 available 2160000
<7> [402.667474] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [402.667617] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:507:DDI A/PHY A] [CRTC:151:pipe A]
<7> [402.667740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [402.667872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [402.668002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [402.668133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [402.668268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)
<7> [402.668402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [402.668534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [402.668661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [402.668787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [402.668915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [402.669041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [402.669169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [402.669296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [402.669430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [402.669559] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)
<7> [402.669685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [402.669811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [402.669935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)
<7> [402.670059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)
<7> [402.670182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [402.670305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [402.670449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [402.670575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [402.670701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [402.670824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [402.670947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [402.671070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)
<7> [402.671193] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [402.671316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [402.671450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)
<7> [402.671576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)
<7> [402.671701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [402.671824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [402.671949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [402.672072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [402.672198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [402.672320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)
<7> [402.672462] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)
<7> [402.672585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [402.672708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [402.672830] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [402.672952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [402.673073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [402.673195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [402.673316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [402.673447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)
<7> [402.673574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [402.673701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [402.673827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [402.673949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [402.674073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [402.674196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [402.674317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [402.674449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [402.674574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [402.674696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)
<7> [402.674820] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [402.674942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [402.675063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)
<7> [402.675184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)
<7> [402.675305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [402.675504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [402.675633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [402.675760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [402.675884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [402.676006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [402.676129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [402.676252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)
<7> [402.676374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [402.676509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [402.676632] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)
<7> [402.676758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)
<7> [402.676882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [402.677005] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [402.677127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [402.677251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [402.677375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [402.677512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)
<7> [402.677636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)
<7> [402.677759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [402.677884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:505:pipe D] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [402.678006] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:505:pipe D] fastset requirement not met, forcing full modeset
<7> [402.678128] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:505:pipe D] releasing DPLL 0
<7> [402.678287] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [402.678415] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x8 -> 0x1
<7> [402.678539] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:505:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x1
<7> [402.678669] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001
<7> [402.678793] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95
<7> [402.678912] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [402.679028] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0
<7> [402.679147] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87
<7> [402.679270] i915 0000:00:02.0: [drm:skl_print_plane_wm_changes [i915]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88
<7> [402.679386] i915 0000:00:02.0: [drm:skl_print_plane_ddb_changes [i915]] [PLANE:499:cursor D] ddb (1953 - 2048) -> ( 0 - 0), size 95 -> 0
<7> [402.679535] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:151:pipe A] data rate 2055280 num active planes 1
<7> [402.679670] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200
<7> [402.679801] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 33901 required 2159 qgv_peak_bw: 51200
<7> [402.679932] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.680057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200
<7> [402.680198] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159
<7> [402.680360] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 256910 kHz
<7> [402.680526] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:505:pipe D] min cdclk: 256910 kHz -> 0 kHz
<7> [402.680681] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:151:pipe A] allocated DPLL 0
<7> [402.680812] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:151:pipe A] reserving DPLL 0
<7> [402.680944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [402.681075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [402.681202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [402.681327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [402.681461] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [402.681585] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [402.681708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [402.681836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64
<7> [402.681964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [402.682091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled
<7> [402.682213] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [402.682338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [402.682472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum hblank: 0
<7> [402.682596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [402.682719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [402.682843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [402.682967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [402.683089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [402.683211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [402.683332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [402.683491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [402.683614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [402.683738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69
<7> [402.683860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878
<7> [402.683981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [402.684102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [402.684224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa
<7> [402.684346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [402.684478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa
<7> [402.684605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa
<7> [402.684730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pixel rate 513820, min cdclk 256910, min voltage level 0
<7> [402.684853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0
<7> [402.684974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [402.685096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe src: 2880x1800+0+0
<7> [402.685217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [402.685338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [402.685470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [402.685597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [402.685720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,
<7> [402.685841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,
<7> [402.685962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.
<7> [402.686083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:
<7> [402.686204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21
<7> [402.686326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7> [402.686456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [402.686579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [402.686700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [402.686821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7> [402.686946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [402.687068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [402.687189] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [402.687335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.687476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.687599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.687719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [402.687838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [402.687988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.688163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.688347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [402.688509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [402.688631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:plane 1A] fb: [FB:509] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [402.688753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [402.688896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [402.689065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [402.689184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [402.689304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [402.689433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [402.689560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [402.689686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:505:pipe D] enable: no [modeset]
<7> [402.689807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:389:plane 1D] fb: [NOFB], visible: no
<7> [402.689929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:419:plane 2D] fb: [NOFB], visible: no
<7> [402.690050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:449:plane 3D] fb: [NOFB], visible: no
<7> [402.690172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:479:plane 4D] fb: [NOFB], visible: no
<7> [402.690292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:489:plane 5D] fb: [NOFB], visible: no
<7> [402.690417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:499:cursor D] fb: [NOFB], visible: no
<7> [402.690667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [402.690848] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000)
<7> [402.691143] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [402.897808] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 0
<7> [402.898759] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe D
<7> [402.912859] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power off
<7> [402.913076] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [402.913427] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [402.913973] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [402.913979] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - short
<7> [402.963587] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [402.964752] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x8, on? 1) for [CRTC:505:pipe D]
<7> [402.964925] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [402.965877] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [402.966690] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [402.967090] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [402.967339] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [402.967901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [402.968016] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [402.969302] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)
<7> [402.969761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:507:DDI A/PHY A]
<7> [402.970078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DDI B/PHY B]
<7> [402.970380] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST A]
<7> [402.970800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST B]
<7> [402.971232] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST C]
<7> [402.971497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:521:DP-MST D]
<7> [402.971644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:529:DDI TC1/PHY TC1]
<7> [402.971790] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:531:DP-MST A]
<7> [402.971931] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DP-MST B]
<7> [402.972071] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DP-MST C]
<7> [402.972204] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST D]
<7> [402.972334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DDI TC2/PHY TC2]
<7> [402.972474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:540:DP-MST A]
<7> [402.972606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DP-MST B]
<7> [402.972737] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DP-MST C]
<7> [402.972871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:543:DP-MST D]
<7> [402.973016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DDI TC3/PHY TC3]
<7> [402.973166] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST A]
<7> [402.973297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST B]
<7> [402.973436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST C]
<7> [402.973569] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:552:DP-MST D]
<7> [402.973699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DDI TC4/PHY TC4]
<7> [402.973829] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST A]
<7> [402.973966] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST B]
<7> [402.974097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST C]
<7> [402.974229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:561:DP-MST D]
<7> [402.974407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [402.974646] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [402.974789] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [402.975001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [402.976484] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [402.976658] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [402.978688] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turn panel power on
<7> [402.978869] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining)
<7> [403.473936] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [403.546122] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [403.546796] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 wait for panel power on
<7> [403.547350] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [403.578881] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [403.579666] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:507:DDI A/PHY A] - long
<7> [403.580318] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [403.581374] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:507:DDI A/PHY A]
<7> [403.747506] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [403.748377] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 turning VDD on
<7> [403.749107] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:507:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [403.752737] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80
<7> [403.754231] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [403.754937] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [403.755948] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [403.756979] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [403.757888] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Clock recovery OK
<7> [403.758014] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [403.759325] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [403.759456] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:508:eDP-1][ENCODER:507:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [403.760052] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [403.760315] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [403.760455] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [403.760637] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:508:eDP-1] set backlight PWM = 4518
<7> [403.771493] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [403.773014] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:508:eDP-1]
<7> [403.773237] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:151:pipe A]
<7> [403.776063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D
<7> [403.776223] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [403.776677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [403.776859] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:505:pipe D]
<7> [403.777282] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [403.782686] Console: switching to colour frame buffer device 180x56
Created at 2026-04-03 06:51:22