Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gcc3169e72 (x86_64) (Linux: 7.0.0-rc4-CI_DRM_18177-g242f4d8af4c4+ x86_64)
Out 
Using IGT_SRANDOM=1773954376 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.031s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.031s)
Dmesg
<6> [185.299107] Console: switching to colour dummy device 80x25
<6> [185.299473] [IGT] kms_force_connector_basic: executing
<7> [185.301592] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [185.302585] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [185.302930] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [185.303744] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [185.303754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.303761] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.308075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.308130] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.308135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.312514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.312573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.312577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.316868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<6> [185.317155] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [185.317636] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [185.317647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.317653] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.318181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.318385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [185.318839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.319050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.319060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [185.319267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [185.323635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.323645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [185.323842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] status updated from disconnected to connected
<7> [185.323917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [185.323922] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [185.323926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [185.323930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [185.323934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [185.323938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [185.323961] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [185.324040] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [185.324093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.324098] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.324523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.324721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [185.325091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.325330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.325342] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [185.325528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [185.329556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.329570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [185.329847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [185.329852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [185.329856] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [185.329859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [185.329863] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [185.329866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [185.330099] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:399:HDMI-A-1] EDID override set
<7> [185.330127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.330131] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.330382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD monitor IGT
<7> [185.330389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD size 24, SAD count 0
<7> [185.330598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [185.330787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [185.331171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [185.331368] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [185.331516] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [185.331529] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [185.331537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [185.331540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [185.331544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [185.331548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [185.331551] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [185.331554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [185.331558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [185.331731] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:399:HDMI-A-1] EDID override set
<7> [185.331764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.331768] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.332008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD monitor IGT
<7> [185.332013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-1] ELD size 24, SAD count 0
<7> [185.332017] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:399:HDMI-A-1] EDID changed, epoch counter 4
<7> [185.332245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [185.332434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [185.332812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [185.333000] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [185.333132] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [185.333142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [185.333146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [185.333149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [185.333153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [185.333156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [185.333160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [185.333306] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:399:HDMI-A-1] EDID override reset
<7> [185.333334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.333338] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.333753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.333941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [185.334319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [185.334513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.334522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [185.334702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [185.338744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [185.338753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [185.338941] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:399:HDMI-A-1] EDID changed, epoch counter 5
<7> [185.339026] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [185.339036] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [185.339044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] probed modes:
<7> [185.339048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [185.339051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [185.339055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [185.339058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [185.339061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [185.339338] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [185.339345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.339350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.343649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] status updated from connected to disconnected
<7> [185.343660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.343697] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [185.343773] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [185.343817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.343821] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.348107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<6> [185.348467] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [185.348906] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [185.349721] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:390:eDP-1] force updated from 0 to 0 or reprobing
<7> [185.349730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [185.349736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [185.350354] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [185.350811] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [185.351006] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [185.351207] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [185.351438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [185.351446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [185.351451] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [185.351455] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [185.351478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [185.351676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [185.351874] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [185.352555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [185.352562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [185.352567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [185.352625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [185.352631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [185.353238] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [185.353677] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [185.353881] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [185.354071] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [185.354425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [185.354432] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [185.354437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [185.354441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [185.354461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [185.354673] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [185.354868] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [185.355431] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [185.355437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [185.355441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [185.355620] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:390:eDP-1] EDID override reset
<7> [185.355648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [185.355653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [185.356271] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [185.356732] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [185.356947] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [185.357138] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [185.357363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [185.357370] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [185.357374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [185.357378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [185.357398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [185.357595] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [185.357782] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [185.358810] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [185.358816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [185.358820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [185.359050] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:399:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [185.359057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.359062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.363453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.363499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.363503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.367805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.367952] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:399:HDMI-A-1] EDID override reset
<7> [185.367976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.367981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.372292] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.372417] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:408:DP-1] EDID override reset
<7> [185.372437] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [185.372441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [185.372738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [185.372849] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:417:DP-2] EDID override reset
<7> [185.372869] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [185.372872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [185.373150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<6> [185.374065] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [185.374498] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [185.384346] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [185.384356] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [185.384417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [185.384423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:390:eDP-1]
<7> [185.385154] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [185.386135] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [185.386652] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000
<7> [185.387086] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [185.387590] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 48 Hz - 120 Hz
<7> [185.387607] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [185.387617] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor LQ134N1JW55
<7> [185.387626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 32, SAD count 0
<7> [185.387677] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [185.388082] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [185.388498] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [185.389499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [185.389508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [185.389514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317250 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [185.389522] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [185.389530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-1]
<7> [185.393981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [185.393995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [185.394001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:408:DP-1]
<7> [185.394385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [185.394393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [185.394397] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:417:DP-2]
<7> [185.395001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [185.395012] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:eDP-1] enabled? yes
<7> [185.395020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:399:HDMI-A-1] enabled? no
<7> [185.395026] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:408:DP-1] enabled? no
<7> [185.395032] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-2] enabled? no
<7> [185.395077] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [185.395107] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:390:eDP-1] found preferred mode: 1920x1200
<7> [185.395114] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [185.395149] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:151:pipe A] desired mode 1920x1200 set (0,0)
<7> [185.400922] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [185.409449] Console: switching to colour frame buffer device 240x75
Created at 2026-03-20 10:26:47