igt@i915_pm_rpm@system-suspend-execbuf on shard-rkl@CI_DRM

Detail	Value
Duration	unknown
Hostname	shard-rkl-1
Igt-Version	IGT-Version: 2.3-g33f5420a2 (x86_64) (Linux: 7.0.0-rc4-CI_DRM_18159-g973a56bafac0+ x86_64)
Out	Using IGT_SRANDOM=1773746955 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811138d820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: system-suspend-execbuf [cmd] rtcwake: assuming RTC uses UTC ... [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Tue Mar 17 11:29:32 2026 Subtest system-suspend-execbuf: SUCCESS (7.342s) This test caused an abort condition: Ping host did not respond to ping, network down
Err	Starting subtest: system-suspend-execbuf Subtest system-suspend-execbuf: SUCCESS (7.342s)
Dmesg	<6> [189.793467] Console: switching to colour dummy device 80x25 <6> [189.793522] [IGT] i915_pm_rpm: executing <7> [189.795636] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [189.796220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [189.796231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [189.800534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [189.800619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] <7> [189.800625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [189.826553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [189.826559] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [189.826562] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [189.826564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [189.826566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [189.826569] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [189.826572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [189.826577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [189.826580] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [189.826791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.826931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.827280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.827409] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.827875] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.827882] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.827887] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE) <7> [189.827892] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.827897] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.827914] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.827922] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.827932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes: <7> [189.827938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.827941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.827948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.827956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.827958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.827968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.827977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.827981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.827986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.827991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5 <7> [189.827995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5 <7> [189.828000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5 <7> [189.828004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [189.828008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [189.828031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.828040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [189.828045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [189.828049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [189.828054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [189.828058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [189.828063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [189.828067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [189.828072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [189.828076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [189.828080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [189.828084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [189.828089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [189.828093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 <7> [189.828098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [189.828103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [189.828107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [189.828112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [189.828117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [189.828122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [189.828126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [189.828131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 <7> [189.828136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 <7> [189.828140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 <7> [189.828144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [189.828149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [189.828153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa <7> [189.828158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [189.828163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [189.828168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [189.828172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [189.828270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [189.828274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [189.832450] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [189.832483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [189.832486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [189.836685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [189.840458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [189.840463] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [189.844648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [189.845062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [189.845067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [189.849243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [189.849487] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [189.849490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [189.853693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [189.854000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [189.854005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [189.858183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [189.858195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] <7> [189.858198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [189.883910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [189.883914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [189.883917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [189.883919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [189.883921] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [189.883924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [189.883927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [189.883930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [189.883933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [189.884138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.884260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [189.884571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [189.884695] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [189.885236] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.885245] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.885250] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE) <7> [189.885254] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.885259] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.885264] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [189.885268] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [189.885275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes: <7> [189.885277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [189.885280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.885288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.885295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.885298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.885305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885307] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [189.885310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [189.885312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.885315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [189.885317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5 <7> [189.885320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5 <7> [189.885322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5 <7> [189.885324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [189.885327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [189.885339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [189.885344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [189.885347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [189.885349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [189.885352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [189.885354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [189.885357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [189.885359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [189.885361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [189.885364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [189.885366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [189.885369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [189.885371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [189.885374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 <7> [189.885376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [189.885378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [189.885381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [189.885383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [189.885386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [189.885388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [189.885391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [189.885393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 <7> [189.885396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 <7> [189.885398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 <7> [189.885401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [189.885403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [189.885405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa <7> [189.885408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [189.885410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [189.885413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [189.885415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [189.885441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [189.885444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [189.889631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [189.889643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [189.889646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [189.893836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [189.894168] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:417] <7> [190.930959] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [190.931839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [190.932600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [190.934207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [190.934712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [190.934987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [190.935177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [190.935326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [190.935475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0) <7> [190.935630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [190.935778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0) <7> [190.935933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [190.936065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0) <7> [190.936196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [190.936329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [190.936461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [190.936934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [190.937527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [190.938126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [190.938689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [190.939254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0) <7> [190.939692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [190.939823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0) <7> [190.939955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [190.940087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0) <7> [190.940217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [190.940347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [190.940478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [190.940615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [190.940743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [190.940873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [190.941002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [190.941132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [190.941261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [190.941391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [190.941520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [190.941659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0) <7> [190.941789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0) <7> [190.941919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0) <7> [190.942050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 222750, found 0) <7> [190.942179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [190.942311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000) <7> [190.942444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in avi infoframe <7> [190.942576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [190.942719] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [190.942720] i915 0000:00:02.0: colorspace: RGB <7> [190.942722] i915 0000:00:02.0: scan mode: Underscan <7> [190.942723] i915 0000:00:02.0: colorimetry: No Data <7> [190.942725] i915 0000:00:02.0: picture aspect: 16:9 <7> [190.942726] i915 0000:00:02.0: active aspect: Same as Picture <7> [190.942727] i915 0000:00:02.0: itc: No Data <7> [190.942728] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [190.942730] i915 0000:00:02.0: quantization range: Limited <7> [190.942731] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [190.942732] i915 0000:00:02.0: video code: 16 <7> [190.942733] i915 0000:00:02.0: ycc quantization range: Limited <7> [190.942734] i915 0000:00:02.0: hdmi content type: Graphics <7> [190.942736] i915 0000:00:02.0: pixel repeat: 0 <7> [190.942737] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [190.942738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [190.942870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in spd infoframe <7> [190.943001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [190.943132] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [190.943133] i915 0000:00:02.0: vendor: Intel <7> [190.943135] i915 0000:00:02.0: product: Integrated gfx <7> [190.943136] i915 0000:00:02.0: source device information: PC General (0x9) <7> [190.943137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [190.943268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hdmi infoframe <7> [190.943398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [190.943527] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [190.943529] i915 0000:00:02.0: empty frame <7> [190.943530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [190.943672] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [190.943807] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7> [190.943965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [190.944095] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [190.944245] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0 <7> [190.944375] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0 <7> [190.944505] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [190.944646] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [190.944778] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [190.944907] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [190.945054] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [190.945189] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [190.945337] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 192000 kHz -> 0 kHz <7> [190.945487] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [190.945640] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [190.945772] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz <7> [190.945905] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [190.946039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset] <7> [190.946173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [190.946307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [190.946443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [190.946578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [190.946721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [190.946853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [190.947071] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:399:HDMI-A-2][ENCODER:398:DDI TC1/PHY C] Disable audio codec on [CRTC:150:pipe A] <7> [190.969315] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [190.986136] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [190.997189] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [191.001279] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [191.001310] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [191.002696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [191.003214] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [191.003644] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [191.003987] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [191.004337] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.005477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B] <7> [191.005825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C] <7> [191.006179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D] <7> [191.006513] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A] <7> [191.006864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B] <7> [191.007141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C] <7> [191.007415] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2] <7> [191.007878] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.008272] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [191.008635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [191.010147] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [191.010375] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [191.110860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.111905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.112826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.114854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.116416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.124143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.125681] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [191.127172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [191.127973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [191.128421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [191.129777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [191.212682] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf <7> [191.213898] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [191.225816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.226188] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [191.226835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [191.227457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [191.228175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.228886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.229571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.230234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.230916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [191.231573] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.232129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [191.232881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.234948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.235508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.247135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.247491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.247790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.248589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.250103] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [191.250020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [191.254337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [191.267588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.267755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.267891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.282993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [191.282998] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [191.283001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [191.283003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [191.283006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [191.283008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [191.283011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [191.283014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [191.283018] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [191.283222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.283346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [191.284154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.284282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.284326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [191.289054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [191.293931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.294115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.294257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.295065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.296493] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [191.314800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.314991] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.315151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.316478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.316985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.322812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.324268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [191.325451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [191.326139] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [191.326605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [191.326965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [191.490619] PM: suspend entry (s2idle) <6> [191.496010] Filesystems sync: 0.004 seconds <6> [191.506393] Freezing user space processes <6> [191.508721] Freezing user space processes completed (elapsed 0.002 seconds) <6> [191.508744] OOM killer disabled. <6> [191.508755] Freezing remaining freezable tasks <6> [191.509691] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) <7> [191.615390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.616160] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [191.616799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [191.617423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [191.618142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.618845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.619531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.620204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [191.620894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [191.622186] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [191.622791] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [191.624273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [191.626415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.627009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.638437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.639733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.640977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [191.645830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [191.651174] GFP mask restricted <6> [191.667219] e1000e: EEE TX LPI TIMER: 00000000 <6> [191.667269] e1000e: EEE TX LPI TIMER: 00000011 <7> [191.686787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.687762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.690234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [191.690538] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [191.690745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [191.690755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [191.690759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [191.690764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [191.690768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [191.690773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [191.690778] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [191.690783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [191.690789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [191.691054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.691248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [191.691668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [191.691864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [191.691906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [191.695006] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [191.695016] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [191.696180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [191.702488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [191.702781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.702930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.703070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.704347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.705571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.705758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.706564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.707926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [191.708115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [191.708350] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0 <7> [191.710131] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <3> [191.713985] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [192.139873] PM: suspend of devices complete after 488.811 msecs <7> [192.139877] PM: start suspend of devices complete after 630.267 msecs <7> [192.160512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [192.160965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [192.161241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.161552] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.161822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.163210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.164488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.165863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [192.166643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [192.166979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [192.167115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [192.167430] PM: late suspend of devices complete after 27.558 msecs <6> [192.178459] ACPI: EC: interrupt blocked <7> [192.399595] PM: Triggering wakeup from IRQ 9 <7> [192.402097] PM: noirq suspend of devices complete after 233.824 msecs <6> [192.405479] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off <6> [192.549426] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry <7> [192.549433] PM: suspend-to-idle <7> [192.549582] ACPI: EC: ACPI EC GPE status set <7> [192.549611] ACPI: PM: Rearming ACPI SCI for wakeup <7> [207.587683] Timekeeping suspended for 14.196 seconds <7> [207.589076] PM: Triggering wakeup from IRQ 9 <7> [207.590888] ACPI: PM: ACPI fixed event wakeup <7> [207.590899] PM: resume from suspend-to-idle <6> [207.745363] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit <6> [207.749368] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on <6> [207.751105] ACPI: EC: interrupt unblocked <7> [208.116406] PM: noirq resume of devices complete after 367.121 msecs <7> [208.119514] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08 <7> [208.120321] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [208.121146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [208.121853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.122522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.123235] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.123912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.124570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.125225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [208.125896] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [208.126451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [208.128001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [208.130119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [208.130689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [208.131309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.131914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [208.132333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [208.132990] PM: early resume of devices complete after 14.752 msecs <7> [208.140209] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [208.140390] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [208.140721] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [208.141011] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [208.141434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: disabled <7> [208.141674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7> [208.141929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7> [208.142084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [208.142237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7> [208.142388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7> [208.142541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7> [208.142693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7> [208.142865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7> [208.143011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [208.143157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [208.143301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [208.143445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [208.143588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [208.143732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [208.143882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7> [208.144024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7> [208.144168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7> [208.144316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7> [208.144461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7> [208.144606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7> [208.144751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:388:DDI B/PHY B] hw state readout: disabled, pipe A <7> [208.144905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:398:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [208.145049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:402:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [208.145179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST A] hw state readout: disabled, pipe A <7> [208.145307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST B] hw state readout: disabled, pipe B <7> [208.145436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:406:DP-MST C] hw state readout: disabled, pipe C <7> [208.145579] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [208.145729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [208.145885] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [208.146102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:389:HDMI-A-1] hw state readout: disabled <7> [208.146265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:399:HDMI-A-2] hw state readout: disabled <7> [208.146424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:403:DP-1] hw state readout: disabled <7> [208.146580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:411:HDMI-A-3] hw state readout: disabled <7> [208.146713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [208.146856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7> [208.146989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7> [208.147121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7> [208.147250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7> [208.147380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7> [208.147510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 0 kHz <7> [208.147639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [208.147768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [208.147908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [208.148036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [208.148165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [208.148293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [208.148422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [208.148551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7> [208.148680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7> [208.148826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7> [208.148990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7> [208.149174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7> [208.149321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7> [208.149476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7> [208.149616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.149746] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.149889] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.150019] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [208.150154] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [208.150288] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [208.150511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [setup_hw_state] <7> [208.150677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [208.150821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7> [208.151155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7> [208.151290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [208.151422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [208.151555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [208.151689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [208.151840] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [208.152016] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [208.152155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset] <7> [208.152291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [208.152428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [208.152563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [208.152695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [208.152849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [208.152985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [208.153121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7> [208.153253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:152:plane 1B] fb: [NOFB], visible: no <7> [208.153386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [208.153525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [208.153695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [208.153861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [208.153994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [208.154126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7> [208.154257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:270:plane 1C] fb: [NOFB], visible: no <7> [208.154386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:300:plane 2C] fb: [NOFB], visible: no <7> [208.154518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:330:plane 3C] fb: [NOFB], visible: no <7> [208.154651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:360:plane 4C] fb: [NOFB], visible: no <7> [208.154791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 5C] fb: [NOFB], visible: no <7> [208.154935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:380:cursor C] fb: [NOFB], visible: no <7> [208.155191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B] <7> [208.155344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C] <7> [208.155495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D] <7> [208.155685] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A] <7> [208.155855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B] <7> [208.156020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C] <7> [208.156189] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:HDMI-A-1] <7> [208.156373] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2] <7> [208.156552] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:403:DP-1] <7> [208.156791] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:411:HDMI-A-3] <6> [208.157061] nvme nvme0: 12/0/0 default/read/poll queues <7> [208.157126] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [208.157474] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7> [208.157893] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7> [208.159328] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <7> [208.159604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <6> [208.161600] serial 00:00: activated <7> [208.163958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [208.165886] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0 <7> [208.166398] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [208.170801] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [208.170813] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <3> [208.179035] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [208.189634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [208.189640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [208.189643] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [208.189645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [208.189648] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.189651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [208.189654] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [208.189657] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.189660] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [208.189858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [208.189985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [208.190300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [208.190426] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [208.190449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [208.194655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [208.243973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [208.244209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [208.244361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [208.244506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [208.244641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [208.245930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <6> [208.450553] ata4: SATA link down (SStatus 4 SControl 300) <6> [208.451901] ata2: SATA link down (SStatus 4 SControl 300) <6> [208.452802] ata3: SATA link down (SStatus 4 SControl 300) <3> [208.539942] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <7> [208.811094] PM: resume of devices complete after 678.259 msecs <7> [208.811899] GFP mask restored <7> [208.812643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [208.817197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [208.818009] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [208.818460] OOM killer enabled. <6> [208.818463] Restarting tasks: Starting <6> [208.818463] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [208.818586] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [208.818836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [208.819116] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [208.819260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [208.819475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [208.819986] Restarting tasks: Done <6> [208.820076] efivarfs: resyncing variable state <6> [208.820498] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) <6> [208.822587] efivarfs: finished resyncing variable state <5> [208.822612] random: crng reseeded on system resumption <6> [208.822706] PM: suspend exit <3> [208.915890] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <7> [208.935865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [208.936213] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [208.936814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [208.937387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.938034] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.938725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.939396] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.940035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [208.940631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [208.942026] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [208.942600] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [208.943720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [208.945671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [208.946230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [208.957725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [208.958166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [208.958734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [208.963256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [208.994212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [208.994218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [208.994220] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [208.994223] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [208.994225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [208.994228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [208.994231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [208.994234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [208.994237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [208.994438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [208.994563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [208.995629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [208.995758] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [208.995780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [209.000275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [209.099852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.100483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.106468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.107923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [209.108606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [209.109323] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [209.109938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [209.110539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.174343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.174805] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [209.175409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [209.176082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.176769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.177444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.178139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.178808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.179433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.180769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [209.181325] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.182423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.184505] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.185111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.195387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.195602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.196117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [209.200761] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [209.232362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [209.232367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [209.232369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [209.232372] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [209.232374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [209.232377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [209.232380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [209.232383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [209.232386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [209.232824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.232949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.233252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.233381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.233403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [209.237736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [209.307917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.309259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.315097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.316805] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [209.317535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [209.318233] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [209.318784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [209.319393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.410134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.410561] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [209.411167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [209.411830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.412505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.413173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.413851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.414511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.415153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.415887] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [209.416556] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.417358] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.419452] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.420071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.430411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.430707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.431256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [209.435900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [209.465720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [209.465725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [209.465728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [209.465731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [209.465733] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [209.465736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [209.465739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [209.465741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [209.465745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [209.465959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.466083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.466382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.466754] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.466776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [209.471656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [209.539689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.540323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.546236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.547687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [209.548329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [209.549072] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [209.549616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [209.550182] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.646381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.646859] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [209.647490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [209.648111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.648824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.649579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.650270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.651010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.651721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.652375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [209.652980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.653326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.654014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.654150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.662730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.662921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.663368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [209.667933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [209.701202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [209.701208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [209.701210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [209.701213] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [209.701215] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [209.701218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [209.701221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [209.701224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [209.701227] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [209.701462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.701586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.701892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.702020] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.702042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [209.707220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [209.771622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.772257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.778190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.779573] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [209.779808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [209.780090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [209.780227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [209.780407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.878508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.878892] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [209.879541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [209.880166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [209.880878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.881635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.882341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.883032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [209.883686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [209.884431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [209.885044] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [209.885813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [209.888002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.888598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.898893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.899096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.900383] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [209.905027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [209.935892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [209.935897] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [209.935900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [209.935903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [209.935905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [209.935908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [209.935911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [209.935914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [209.935917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [209.936128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.936251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [209.937211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [209.937338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [209.937373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [209.941973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [210.043660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.044415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [210.050378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.051775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [210.052454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [210.053152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [210.053708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [210.054347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [210.114509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [210.114894] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [210.115561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [210.116188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.116896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.117591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.118239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.118966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.119698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [210.120364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [210.120928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [210.121682] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [210.123736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [210.124294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [210.134616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [210.134835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.135412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [210.140069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [210.174645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [210.174651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [210.174653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [210.174656] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [210.174658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [210.174661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [210.174664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [210.174667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [210.174670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [210.174879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.175006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [210.175327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.175457] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [210.175478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [210.180751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [210.243681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.244421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [210.250285] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.251670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [210.251913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [210.252193] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [210.252340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [210.252512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [210.349425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [210.349814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [210.350482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [210.351155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.351910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.352629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.353305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.353989] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.354678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [210.355319] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [210.355455] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [210.355697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [210.356394] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [210.356530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [210.362683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [210.362781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.363057] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [210.367648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [210.399653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [210.399659] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [210.399661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [210.399664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [210.399666] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [210.399669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [210.399672] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [210.399675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [210.399678] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [210.399884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.400011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [210.400332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.400469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [210.400491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [210.405646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [210.475563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.476324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [210.482252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.483607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [210.483843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [210.484124] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [210.484272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [210.484445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [210.575423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [210.575813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [210.576474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [210.577153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.577944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.578757] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.579523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.580270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.580980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [210.581770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [210.582372] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [210.583095] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [210.585432] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [210.586055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [210.597606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [210.597826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.598473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [210.603001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [210.635100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [210.635106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [210.635108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [210.635111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [210.635114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [210.635116] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [210.635120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [210.635123] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [210.635126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [210.635338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.635465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [210.635766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.635895] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [210.635918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [210.641150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [210.707393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.708021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [210.713981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.715418] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [210.716075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [210.716859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [210.717456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [210.718076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [210.815945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [210.816403] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [210.817008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [210.817685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.818367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.819035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.819771] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.820495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [210.821209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [210.822628] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [210.823212] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [210.823934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [210.826027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [210.826639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [210.835733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [210.835931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.836468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [210.841101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [210.873053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [210.873059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [210.873062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [210.873064] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [210.873067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [210.873069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [210.873073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [210.873076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [210.873079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [210.873285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.873414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [210.873728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [210.873858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [210.873880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [210.879106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [210.947364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.947996] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [210.953911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.955312] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [210.955543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [210.955824] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [210.955963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [210.956149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.050298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.050676] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.051347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.051973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.052702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.053472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.054187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.054845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.055581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.056331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [211.056958] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.057427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.058123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.058262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.066914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.067108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.067581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [211.072204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [211.104229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [211.104234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [211.104237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [211.104239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [211.104241] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [211.104244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [211.104247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [211.104250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [211.104253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [211.104459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.104583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [211.104887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.105012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.105034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [211.110308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [211.179315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.179946] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.185851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.187304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [211.187958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [211.188702] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [211.189245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [211.189819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.281646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.282025] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.282705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.283359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.284024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.284763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.285506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.286237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.286951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.287755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [211.288416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.289214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.291424] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.291987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.301122] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.301364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.302088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [211.306788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [211.338815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [211.338820] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [211.338823] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [211.338826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [211.338828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [211.338831] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [211.338834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [211.338837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [211.338840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [211.339053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.339179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [211.339490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.339618] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.339639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [211.344913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [211.411262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.411899] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.417808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.419211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [211.419667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [211.419949] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [211.420115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [211.420287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.515118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.515506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.516161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.516784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.517500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.518267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.518948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.519672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.520394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.521152] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [211.521769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.522529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.524612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.525215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.535501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.535709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.536209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [211.540820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [211.574232] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [211.574237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [211.574240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [211.574242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [211.574245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [211.574247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [211.574250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [211.574253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [211.574256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [211.574467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.574588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [211.574892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.575330] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.575353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [211.580279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [211.643268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.643903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.649887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.651329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [211.652013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [211.652735] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [211.653336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [211.653949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.750090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.750477] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.751137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.751761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.752470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.753154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.753817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.754510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.755163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.755816] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [211.756446] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.756773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.757466] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.757601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.764993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.765176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.765760] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [211.770417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [211.803615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [211.803621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [211.803623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [211.803626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [211.803628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [211.803631] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [211.803634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [211.803637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [211.803640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [211.803847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.804710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [211.805015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [211.805145] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.805167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [211.809624] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [211.875185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.875874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.880714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.882047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [211.882275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [211.882556] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [211.882693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [211.882865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.978788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.979261] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [211.979866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [211.980545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [211.981237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.981966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.982684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.983404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [211.984082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [211.984814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [211.985441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [211.986162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [211.988240] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.988800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.997941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.998174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.998914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [212.003625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [212.037460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [212.037466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [212.037468] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [212.037471] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [212.037473] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [212.037476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [212.037479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [212.037482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [212.037485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [212.037688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.037810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.038403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.038534] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.038556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [212.043132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [212.107097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.107731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.113647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.115098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.115751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.116509] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.117099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.117709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.211935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.212325] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.212963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.213587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.214287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.214973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.215623] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.216299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.216937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.217587] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [212.218198] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.218997] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.221275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.221862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.232174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.232422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.233244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [212.237856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [212.268779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [212.268784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [212.268787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [212.268790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [212.268792] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [212.268795] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [212.268798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [212.268801] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [212.268804] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [212.269024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.269150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.269461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.269589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.269611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [212.274785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [212.347190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.347882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.353762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.355134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.355366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.355646] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.355784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.355968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.446987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.447371] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.448041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.448948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.449954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.451008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.451970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.452850] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.453110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.453424] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [212.453622] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.453981] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.454747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.454970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.461170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.461268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.461535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [212.466164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [212.495698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [212.495706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [212.495708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [212.495711] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [212.495713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [212.495716] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [212.495719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [212.495722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [212.495725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [212.496807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.497011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.497381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.497573] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.497615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [212.502931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [212.571005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.571704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.578974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.580576] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.581400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.582221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.582954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.583644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.675476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.675922] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.676530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.677211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.677973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.678654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.679470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.680199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.680864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.681307] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [212.681441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.681691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.682400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.682538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.688676] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.688797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.689063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [212.693667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [212.727164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [212.727170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [212.727173] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [212.727175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [212.727178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [212.727180] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [212.727184] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [212.727187] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [212.727190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [212.727394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.727520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.727836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.727968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.727990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [212.733229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [212.795003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.795649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.801623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.802984] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [212.803226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [212.803506] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [212.803644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [212.803842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.903884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.904264] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [212.904922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [212.905600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [212.906351] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.907116] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.907879] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.908590] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [212.909358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [212.910154] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [212.910764] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [212.911588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [212.913953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.914537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.924971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.925144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.925702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [212.930310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [212.961450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [212.961456] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [212.961459] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [212.961461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [212.961464] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [212.961466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [212.961470] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [212.961472] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [212.961476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [212.961686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.961825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [212.962139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [212.962267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.962288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [212.967237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [213.034908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.035605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.041630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.043080] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [213.043812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [213.044558] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [213.045250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [213.045932] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.138535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.139010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [213.139616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [213.140304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [213.141078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.141779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.142513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.143287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.143955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [213.144613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [213.145265] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [213.146044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [213.146914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.147050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.155661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.155836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.156377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [213.160904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [213.193335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [213.193341] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [213.193344] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [213.193346] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [213.193349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [213.193351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [213.193355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [213.193358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [213.193361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [213.193576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.194071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [213.194403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.194532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.194555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [213.200140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [213.266831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.267477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.273446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.274807] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [213.275067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [213.275346] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [213.275484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [213.275664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.369327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.369762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [213.370367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [213.371053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [213.371815] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.372484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.373300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.374059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.374782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [213.375450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [213.376163] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [213.377039] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [213.379320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.379991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.390412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.390619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.390895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [213.395507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [213.428127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [213.428133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [213.428135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [213.428138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [213.428140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [213.428143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [213.428146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [213.428149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [213.428152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [213.428353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.428476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [213.429035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.429163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.429185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [213.434995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [213.538832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.539477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.545430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.546902] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [213.547578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [213.548276] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [213.548824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [213.549390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [213.593054] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS <7> [213.597937] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [213.598532] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [213.599186] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:398:DDI TC1/PHY C] [CRTC:150:pipe A] <7> [213.599771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [213.600487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [213.601147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [213.601910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [213.602518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [213.603305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [213.603917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [213.604617] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200) <7> [213.605235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [213.605373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200) <7> [213.605532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [213.605688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052) <7> [213.605833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [213.605971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [213.606104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [213.606236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [213.606399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [213.606548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [213.606686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [213.606819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200) <7> [213.606963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [213.607093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200) <7> [213.607257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [213.607389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052) <7> [213.607529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [213.607677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [213.607815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [213.607979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [213.608115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [213.608257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [213.608392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [213.608542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [213.608675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [213.608837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [213.608980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [213.609118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36) <7> [213.609255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500) <7> [213.609397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500) <7> [213.609530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 222750) <7> [213.609709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [213.609844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006) <7> [213.609987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in avi infoframe <7> [213.610126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [213.610258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [213.610421] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [213.610423] i915 0000:00:02.0: colorspace: RGB <7> [213.610424] i915 0000:00:02.0: scan mode: Underscan <7> [213.610426] i915 0000:00:02.0: colorimetry: No Data <7> [213.610428] i915 0000:00:02.0: picture aspect: 16:9 <7> [213.610429] i915 0000:00:02.0: active aspect: Same as Picture <7> [213.610430] i915 0000:00:02.0: itc: No Data <7> [213.610432] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [213.610433] i915 0000:00:02.0: quantization range: Limited <7> [213.610434] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [213.610436] i915 0000:00:02.0: video code: 16 <7> [213.610437] i915 0000:00:02.0: ycc quantization range: Limited <7> [213.610438] i915 0000:00:02.0: hdmi content type: Graphics <7> [213.610440] i915 0000:00:02.0: pixel repeat: 0 <7> [213.610441] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [213.610443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in spd infoframe <7> [213.610618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [213.610760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [213.610900] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [213.610901] i915 0000:00:02.0: vendor: Intel <7> [213.610903] i915 0000:00:02.0: product: Integrated gfx <7> [213.610904] i915 0000:00:02.0: source device information: PC General (0x9) <7> [213.610906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hdmi infoframe <7> [213.611039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [213.611170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [213.611300] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [213.611301] i915 0000:00:02.0: empty frame <7> [213.611304] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [213.611500] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [213.611658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [213.611792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012 <7> [213.611931] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36 <7> [213.612066] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [213.612221] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 <7> [213.612350] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 <7> [213.612487] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 <7> [213.612653] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 594000 num active planes 1 <7> [213.612797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 594 <7> [213.612961] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [213.613113] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 192000 kHz <7> [213.613278] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [213.613425] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [213.613572] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [213.613706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [213.613880] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7> [213.614020] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7> [213.614161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7> [213.614295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [213.614431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [213.614587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [213.614719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [213.614862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [213.615023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [213.615162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [213.615297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x6 <7> [213.615437] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [213.615439] i915 0000:00:02.0: colorspace: RGB <7> [213.615440] i915 0000:00:02.0: scan mode: Underscan <7> [213.615442] i915 0000:00:02.0: colorimetry: No Data <7> [213.615443] i915 0000:00:02.0: picture aspect: 16:9 <7> [213.615444] i915 0000:00:02.0: active aspect: Same as Picture <7> [213.615446] i915 0000:00:02.0: itc: No Data <7> [213.615447] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [213.615448] i915 0000:00:02.0: quantization range: Limited <7> [213.615450] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [213.615451] i915 0000:00:02.0: video code: 16 <7> [213.615452] i915 0000:00:02.0: ycc quantization range: Limited <7> [213.615454] i915 0000:00:02.0: hdmi content type: Graphics <7> [213.615455] i915 0000:00:02.0: pixel repeat: 0 <7> [213.615456] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [213.615458] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [213.615459] i915 0000:00:02.0: vendor: Intel <7> [213.615461] i915 0000:00:02.0: product: Integrated gfx <7> [213.615462] i915 0000:00:02.0: source device information: PC General (0x9) <7> [213.615464] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [213.615465] i915 0000:00:02.0: empty frame <7> [213.615466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [213.615619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [213.615751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 07 00 00 00 <7> [213.615886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [213.616042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [213.616201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [213.616338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [213.616483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [213.616641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [213.616774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [213.616936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [213.617067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [213.617207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [213.617341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [213.617481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0 <7> [213.617650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [213.617783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [213.617927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [213.618063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [213.618203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [213.618338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [213.618502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [213.618760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [213.618899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [213.619041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [213.619171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [213.619332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [213.619463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [213.619613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [213.619749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [213.619889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [213.620052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [213.620185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:415] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [213.620326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [213.620458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [213.620612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [213.620766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [213.620904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [213.621037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [213.621172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [213.632648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.632836] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [213.632982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [213.633163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [213.633395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.633630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.633833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.634079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [213.634258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [213.634667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [213.634828] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [213.635349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [213.636094] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.636261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.644861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.645081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.645222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.646190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.647723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [213.647948] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 768000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [213.648631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B] <7> [213.648789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C] <7> [213.648926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D] <7> [213.649066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A] <7> [213.649231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B] <7> [213.649366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C] <7> [213.649562] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [213.649801] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [213.649972] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [213.650388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [213.650623] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [213.651576] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [213.651723] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [213.668584] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:399:HDMI-A-2][ENCODER:398:DDI TC1/PHY C] Enable audio codec on [CRTC:150:pipe A], 36 bytes ELD <7> [213.684942] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [213.685250] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <7> [213.685655] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2] <7> [213.686047] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [213.687429] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [213.687457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <6> [213.688188] [IGT] i915_pm_rpm: exiting, ret=0 <7> [213.692134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [213.698924] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [213.703577] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [213.703621] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [213.718059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [213.718066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30. <7> [213.718069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36. <7> [213.718072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48. <7> [213.718075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [213.718077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [213.718081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV <7> [213.718088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [213.718092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3 <7> [213.718340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.718530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [213.718884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [213.719069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [213.719204] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <6> [213.735030] Console: switching to colour frame buffer device 240x67 <7> [213.734960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [213.739227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [189.796220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [189.796231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [189.800534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [189.800619] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]

<7> [189.800625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [189.826553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [189.826559] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [189.826562] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [189.826564] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [189.826566] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [189.826569] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [189.826572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [189.826577] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [189.826580] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [189.826791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.826931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.827280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.827409] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.827875] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.827882] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.827887] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)

<7> [189.827892] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.827897] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.827914] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.827922] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.827932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes:

<7> [189.827938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.827941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827946] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.827948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.827956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.827958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.827968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.827977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.827981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.827986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.827991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5

<7> [189.827995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5

<7> [189.828000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5

<7> [189.828004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [189.828008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [189.828031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.828040] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [189.828045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [189.828049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [189.828054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [189.828058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [189.828063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [189.828067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [189.828072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [189.828076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [189.828080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [189.828084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [189.828089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [189.828093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5

<7> [189.828098] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [189.828103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [189.828107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [189.828112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [189.828117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [189.828122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [189.828126] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [189.828131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5

<7> [189.828136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005

<7> [189.828140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005

<7> [189.828144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [189.828149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [189.828153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa

<7> [189.828158] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [189.828163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [189.828168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [189.828172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [189.828270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [189.828274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [189.832450] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [189.832483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [189.832486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [189.836685] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [189.840458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [189.840463] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [189.844648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [189.845062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [189.845067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [189.849243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [189.849487] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [189.849490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [189.853693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [189.854000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [189.854005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [189.858183] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [189.858195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]

<7> [189.858198] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [189.883910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [189.883914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [189.883917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [189.883919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [189.883921] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [189.883924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [189.883927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [189.883930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [189.883933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [189.884138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.884260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [189.884571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [189.884695] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [189.885236] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.885245] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.885250] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)

<7> [189.885254] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.885259] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.885264] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [189.885268] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [189.885275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes:

<7> [189.885277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [189.885280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.885288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.885295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.885298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.885305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885307] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [189.885310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [189.885312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.885315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [189.885317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5

<7> [189.885320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5

<7> [189.885322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5

<7> [189.885324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [189.885327] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [189.885339] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [189.885344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [189.885347] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [189.885349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [189.885352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [189.885354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [189.885357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [189.885359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [189.885361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [189.885364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [189.885366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [189.885369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [189.885371] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [189.885374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5

<7> [189.885376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [189.885378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [189.885381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [189.885383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [189.885386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [189.885388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [189.885391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [189.885393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5

<7> [189.885396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005

<7> [189.885398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005

<7> [189.885401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [189.885403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [189.885405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa

<7> [189.885408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [189.885410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [189.885413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [189.885415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [189.885441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [189.885444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [189.889631] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [189.889643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [189.889646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [189.893836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [190.930959] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [190.931839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [190.932600] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [190.934207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [190.934712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [190.934987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [190.935177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [190.935326] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [190.935475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)

<7> [190.935630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [190.935778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)

<7> [190.935933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [190.936065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)

<7> [190.936196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [190.936329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [190.936461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [190.936934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [190.937527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [190.938126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [190.938689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [190.939254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)

<7> [190.939692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [190.939823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)

<7> [190.939955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [190.940087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)

<7> [190.940217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [190.940347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [190.940478] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [190.940615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [190.940743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [190.940873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [190.941002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [190.941132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [190.941261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [190.941391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [190.941520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [190.941659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0)

<7> [190.941789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)

<7> [190.941919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)

<7> [190.942050] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 222750, found 0)

<7> [190.942179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [190.942311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000)

<7> [190.942444] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in avi infoframe

<7> [190.942576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [190.942719] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [190.942731] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [190.942737] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [190.942738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [190.942870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in spd infoframe

<7> [190.943001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [190.943132] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [190.943136] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [190.943137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [190.943268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hdmi infoframe

<7> [190.943398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [190.943527] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [190.943530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [190.943672] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [190.943807] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0

<7> [190.943965] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [190.944095] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [190.944245] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0

<7> [190.944375] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0

<7> [190.944505] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [190.944646] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [190.944778] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [190.944907] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [190.945054] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [190.945189] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [190.945337] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 192000 kHz -> 0 kHz

<7> [190.945487] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [190.945640] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [190.945772] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz

<7> [190.945905] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [190.946039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]

<7> [190.946173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [190.946307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [190.946443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [190.946578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [190.946721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [190.946853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [190.947071] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:399:HDMI-A-2][ENCODER:398:DDI TC1/PHY C] Disable audio codec on [CRTC:150:pipe A]

<7> [190.969315] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [190.986136] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [190.997189] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [191.001279] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [191.001310] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [191.002696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [191.003214] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [191.003644] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [191.003987] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [191.004337] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.005477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B]

<7> [191.005825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C]

<7> [191.006179] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D]

<7> [191.006513] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A]

<7> [191.006864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B]

<7> [191.007141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C]

<7> [191.007415] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [191.007878] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.008272] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [191.008635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [191.010147] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [191.010375] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [191.110860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [191.111905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.112826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.114854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.116416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [191.124143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.125681] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [191.127172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [191.127973] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [191.128421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [191.129777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [191.212682] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf

<7> [191.213898] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [191.225816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [191.226188] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [191.226835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [191.227457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [191.228175] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.228886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.229571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.230234] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.230916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [191.231573] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.232129] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [191.232881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.234948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.235508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.247135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [191.247491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.247790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [191.248589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.250103] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [191.250020] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [191.254337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [191.267588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [191.267755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.267891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.282993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [191.282998] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [191.283001] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [191.283003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [191.283006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [191.283008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [191.283011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [191.283014] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [191.283018] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [191.283222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.283346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [191.284154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.284282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.284326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [191.289054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [191.293931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.294115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.294257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [191.295065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.296493] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [191.314800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [191.314991] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.315151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.316478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.316985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [191.322812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.324268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [191.325451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [191.326139] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [191.326605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [191.326965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [191.508721] Freezing user space processes completed (elapsed 0.002 seconds)

<6> [191.509691] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)

<7> [191.615390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [191.616160] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [191.616799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [191.617423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [191.618142] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.618845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.619531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.620204] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [191.620894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [191.622186] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [191.622791] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [191.624273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [191.626415] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.627009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.638437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [191.639733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.640977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [191.645830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [191.686787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [191.687762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.690234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [191.690538] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [191.690745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [191.690755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [191.690759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [191.690764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [191.690768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [191.690773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [191.690778] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [191.690783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [191.690789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [191.691054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.691248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [191.691668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [191.691864] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [191.691906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [191.695006] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [191.695016] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [191.696180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [191.702488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [191.702781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [191.702930] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [191.703070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [191.704347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [191.705571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [191.705758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [191.706564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [191.707926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [191.708115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [191.708350] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0

<7> [191.710131] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<3> [191.713985] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [192.139877] PM: start suspend of devices complete after 630.267 msecs

<7> [192.160512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [192.160965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [192.161241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [192.161552] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [192.161822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [192.163210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [192.164488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [192.165863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [192.166643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [192.166979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [192.167115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [192.167430] PM: late suspend of devices complete after 27.558 msecs

<7> [192.402097] PM: noirq suspend of devices complete after 233.824 msecs

<6> [192.405479] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off

<6> [192.549426] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry

<6> [207.745363] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit

<6> [207.749368] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on

<7> [208.116406] PM: noirq resume of devices complete after 367.121 msecs

<7> [208.119514] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08

<7> [208.120321] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [208.121146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [208.121853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.122522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.123235] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.123912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.124570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.125225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [208.125896] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [208.126451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [208.128001] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [208.130119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [208.130689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [208.131309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.131914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [208.132333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [208.132990] PM: early resume of devices complete after 14.752 msecs

<7> [208.140209] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [208.140390] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [208.140721] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [208.141011] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [208.141434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: disabled

<7> [208.141674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled

<7> [208.141929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled

<7> [208.142084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [208.142237] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A

<7> [208.142388] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A

<7> [208.142541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A

<7> [208.142693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A

<7> [208.142865] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A

<7> [208.143011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [208.143157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [208.143301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [208.143445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [208.143588] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [208.143732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [208.143882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C

<7> [208.144024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C

<7> [208.144168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C

<7> [208.144316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C

<7> [208.144461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C

<7> [208.144606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C

<7> [208.144751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:388:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [208.144905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:398:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [208.145049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:402:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [208.145179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST A] hw state readout: disabled, pipe A

<7> [208.145307] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST B] hw state readout: disabled, pipe B

<7> [208.145436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:406:DP-MST C] hw state readout: disabled, pipe C

<7> [208.145579] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [208.145729] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [208.145885] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [208.146102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:389:HDMI-A-1] hw state readout: disabled

<7> [208.146265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:399:HDMI-A-2] hw state readout: disabled

<7> [208.146424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:403:DP-1] hw state readout: disabled

<7> [208.146580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:411:HDMI-A-3] hw state readout: disabled

<7> [208.146713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [208.146856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz

<7> [208.146989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz

<7> [208.147121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz

<7> [208.147250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz

<7> [208.147380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz

<7> [208.147510] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 0 kHz

<7> [208.147639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [208.147768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [208.147908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [208.148036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [208.148165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [208.148293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [208.148422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [208.148551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz

<7> [208.148680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz

<7> [208.148826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz

<7> [208.148990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz

<7> [208.149174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz

<7> [208.149321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz

<7> [208.149476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz

<7> [208.149616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.149746] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.149889] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.150019] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [208.150154] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [208.150288] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [208.150511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [setup_hw_state]

<7> [208.150677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [208.150821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state]

<7> [208.151155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state

<7> [208.151290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [208.151422] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [208.151555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [208.151689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [208.151840] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [208.152016] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [208.152155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]

<7> [208.152291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [208.152428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [208.152563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [208.152695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [208.152849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [208.152985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [208.153121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset]

<7> [208.153253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:152:plane 1B] fb: [NOFB], visible: no

<7> [208.153386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [208.153525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [208.153695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [208.153861] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [208.153994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [208.154126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset]

<7> [208.154257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:270:plane 1C] fb: [NOFB], visible: no

<7> [208.154386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:300:plane 2C] fb: [NOFB], visible: no

<7> [208.154518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:330:plane 3C] fb: [NOFB], visible: no

<7> [208.154651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:360:plane 4C] fb: [NOFB], visible: no

<7> [208.154791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:370:plane 5C] fb: [NOFB], visible: no

<7> [208.154935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:380:cursor C] fb: [NOFB], visible: no

<7> [208.155191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B]

<7> [208.155344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C]

<7> [208.155495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D]

<7> [208.155685] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A]

<7> [208.155855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B]

<7> [208.156020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C]

<7> [208.156189] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [208.156373] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [208.156552] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:403:DP-1]

<7> [208.156791] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [208.157126] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [208.157474] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B]

<7> [208.157893] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C]

<7> [208.159328] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<7> [208.159604] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [208.163958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [208.165886] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0

<7> [208.166398] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [208.170801] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [208.170813] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<3> [208.179035] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [208.189634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [208.189640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [208.189643] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [208.189645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [208.189648] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.189651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [208.189654] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [208.189657] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.189660] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [208.189858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [208.189985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [208.190300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [208.190426] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [208.190449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [208.194655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [208.243973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [208.244209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [208.244361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [208.244506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [208.244641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [208.245930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [208.539942] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<7> [208.812643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [208.817197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [208.818009] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [208.818463] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [208.818586] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [208.818836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [208.819116] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [208.819260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [208.819475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [208.820498] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])

<3> [208.915890] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [208.935865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [208.936213] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [208.936814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [208.937387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.938034] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.938725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.939396] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.940035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [208.940631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [208.942026] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [208.942600] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [208.943720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [208.945671] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [208.946230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [208.957725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [208.958166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [208.958734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [208.963256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [208.994212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [208.994218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [208.994220] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [208.994223] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [208.994225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [208.994228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [208.994231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [208.994234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [208.994237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [208.994438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [208.994563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [208.995629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [208.995758] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [208.995780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [209.000275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [209.099852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.100483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.106468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.107923] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [209.108606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [209.109323] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [209.109938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [209.110539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.174343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.174805] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [209.175409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [209.176082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.176769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.177444] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.178139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.178808] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.179433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.180769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [209.181325] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.182423] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.184505] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.185111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.195387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.195602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.196117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [209.200761] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [209.232362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [209.232367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [209.232369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [209.232372] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [209.232374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [209.232377] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [209.232380] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [209.232383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [209.232386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [209.232824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.232949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.233252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.233381] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.233403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [209.237736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [209.307917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.309259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.315097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.316805] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [209.317535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [209.318233] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [209.318784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [209.319393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.410134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.410561] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [209.411167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [209.411830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.412505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.413173] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.413851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.414511] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.415153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.415887] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [209.416556] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.417358] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.419452] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.420071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.430411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.430707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.431256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [209.435900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [209.465720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [209.465725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [209.465728] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [209.465731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [209.465733] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [209.465736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [209.465739] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [209.465741] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [209.465745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [209.465959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.466083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.466382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.466754] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.466776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [209.471656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [209.539689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.540323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.546236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.547687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [209.548329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [209.549072] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [209.549616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [209.550182] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.646381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.646859] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [209.647490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [209.648111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.648824] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.649579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.650270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.651010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.651721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.652375] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [209.652980] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.653326] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.654014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.654150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.662730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.662921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.663368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [209.667933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [209.701202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [209.701208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [209.701210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [209.701213] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [209.701215] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [209.701218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [209.701221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [209.701224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [209.701227] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [209.701462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.701586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.701892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.702020] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.702042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [209.707220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [209.771622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.772257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.778190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.779573] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [209.779808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [209.780090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [209.780227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [209.780407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.878508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.878892] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [209.879541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [209.880166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [209.880878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.881635] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.882341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.883032] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [209.883686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [209.884431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [209.885044] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [209.885813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [209.888002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.888598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.898893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.899096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.900383] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [209.905027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [209.935892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [209.935897] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [209.935900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [209.935903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [209.935905] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [209.935908] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [209.935911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [209.935914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [209.935917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [209.936128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.936251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [209.937211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [209.937338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [209.937373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [209.941973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [210.043660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.044415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [210.050378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.051775] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [210.052454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [210.053152] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [210.053708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [210.054347] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [210.114509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [210.114894] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [210.115561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [210.116188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.116896] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.117591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.118239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.118966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.119698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [210.120364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [210.120928] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [210.121682] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [210.123736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [210.124294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [210.134616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [210.134835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.135412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [210.140069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [210.174645] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [210.174651] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [210.174653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [210.174656] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [210.174658] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [210.174661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [210.174664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [210.174667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [210.174670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [210.174879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.175006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [210.175327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.175457] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [210.175478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [210.180751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [210.243681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.244421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [210.250285] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.251670] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [210.251913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [210.252193] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [210.252340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [210.252512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [210.349425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [210.349814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [210.350482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [210.351155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.351910] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.352629] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.353305] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.353989] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.354678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [210.355319] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [210.355455] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [210.355697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [210.356394] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [210.356530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [210.362683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [210.362781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.363057] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [210.367648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [210.399653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [210.399659] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [210.399661] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [210.399664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [210.399666] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [210.399669] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [210.399672] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [210.399675] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [210.399678] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [210.399884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.400011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [210.400332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.400469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [210.400491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [210.405646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [210.475563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.476324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [210.482252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.483607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [210.483843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [210.484124] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [210.484272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [210.484445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [210.575423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [210.575813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [210.576474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [210.577153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.577944] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.578757] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.579523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.580270] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.580980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [210.581770] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [210.582372] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [210.583095] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [210.585432] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [210.586055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [210.597606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [210.597826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.598473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [210.603001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [210.635100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [210.635106] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [210.635108] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [210.635111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [210.635114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [210.635116] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [210.635120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [210.635123] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [210.635126] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [210.635338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.635465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [210.635766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.635895] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [210.635918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [210.641150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [210.707393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.708021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [210.713981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.715418] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [210.716075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [210.716859] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [210.717456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [210.718076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [210.815945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [210.816403] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [210.817008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [210.817685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.818367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.819035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.819771] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.820495] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [210.821209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [210.822628] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [210.823212] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [210.823934] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [210.826027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [210.826639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [210.835733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [210.835931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.836468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [210.841101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [210.873053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [210.873059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [210.873062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [210.873064] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [210.873067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [210.873069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [210.873073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [210.873076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [210.873079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [210.873285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.873414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [210.873728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [210.873858] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [210.873880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [210.879106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [210.947364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.947996] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [210.953911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.955312] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [210.955543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [210.955824] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [210.955963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [210.956149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.050298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.050676] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.051347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.051973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.052702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.053472] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.054187] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.054845] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.055581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.056331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [211.056958] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.057427] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.058123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.058262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.066914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.067108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.067581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [211.072204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [211.104229] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [211.104234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [211.104237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [211.104239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [211.104241] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [211.104244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [211.104247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [211.104250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [211.104253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [211.104459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.104583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [211.104887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.105012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.105034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [211.110308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [211.179315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.179946] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.185851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.187304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [211.187958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [211.188702] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [211.189245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [211.189819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.281646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.282025] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.282705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.283359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.284024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.284763] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.285506] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.286237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.286951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.287755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [211.288416] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.289214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.291424] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.291987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.301122] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.301364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.302088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [211.306788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [211.338815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [211.338820] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [211.338823] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [211.338826] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [211.338828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [211.338831] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [211.338834] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [211.338837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [211.338840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [211.339053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.339179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [211.339490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.339618] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.339639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [211.344913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [211.411262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.411899] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.417808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.419211] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [211.419667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [211.419949] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [211.420115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [211.420287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.515118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.515506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.516161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.516784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.517500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.518267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.518948] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.519672] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.520394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.521152] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [211.521769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.522529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.524612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.525215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.535501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.535709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.536209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [211.540820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [211.574232] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [211.574237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [211.574240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [211.574242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [211.574245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [211.574247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [211.574250] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [211.574253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [211.574256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [211.574467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.574588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [211.574892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.575330] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.575353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [211.580279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [211.643268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.643903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.649887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.651329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [211.652013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [211.652735] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [211.653336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [211.653949] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.750090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.750477] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.751137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.751761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.752470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.753154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.753817] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.754510] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.755163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.755816] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [211.756446] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.756773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.757466] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.757601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.764993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.765176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.765760] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [211.770417] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [211.803615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [211.803621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [211.803623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [211.803626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [211.803628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [211.803631] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [211.803634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [211.803637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [211.803640] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [211.803847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.804710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [211.805015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [211.805145] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.805167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [211.809624] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [211.875185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.875874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.880714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.882047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [211.882275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [211.882556] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [211.882693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [211.882865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.978788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.979261] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [211.979866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [211.980545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [211.981237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.981966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.982684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.983404] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [211.984082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [211.984814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [211.985441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [211.986162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [211.988240] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.988800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.997941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.998174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.998914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [212.003625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [212.037460] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [212.037466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [212.037468] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [212.037471] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [212.037473] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [212.037476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [212.037479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [212.037482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [212.037485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [212.037688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.037810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.038403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.038534] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.038556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [212.043132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [212.107097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.107731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.113647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.115098] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.115751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.116509] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.117099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.117709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.211935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.212325] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.212963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.213587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.214287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.214973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.215623] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.216299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.216937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.217587] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [212.218198] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.218997] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.221275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.221862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.232174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.232422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.233244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [212.237856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [212.268779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [212.268784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [212.268787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [212.268790] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [212.268792] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [212.268795] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [212.268798] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [212.268801] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [212.268804] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [212.269024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.269150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.269461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.269589] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.269611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [212.274785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [212.347190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.347882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.353762] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.355134] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.355366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.355646] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.355784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.355968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.446987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.447371] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.448041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.448948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.449954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.451008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.451970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.452850] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.453110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.453424] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [212.453622] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.453981] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.454747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.454970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.461170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.461268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.461535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [212.466164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [212.495698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [212.495706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [212.495708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [212.495711] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [212.495713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [212.495716] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [212.495719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [212.495722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [212.495725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [212.496807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.497011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.497381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.497573] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.497615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [212.502931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [212.571005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.571704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.578974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.580576] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.581400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.582221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.582954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.583644] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.675476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.675922] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.676530] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.677211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.677973] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.678654] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.679470] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.680199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.680864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.681307] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [212.681441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.681691] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.682400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.682538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.688676] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.688797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.689063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [212.693667] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [212.727164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [212.727170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [212.727173] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [212.727175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [212.727178] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [212.727180] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [212.727184] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [212.727187] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [212.727190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [212.727394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.727520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.727836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.727968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.727990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [212.733229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [212.795003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.795649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.801623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.802984] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [212.803226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [212.803506] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [212.803644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [212.803842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.903884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.904264] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [212.904922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [212.905600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [212.906351] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.907116] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.907879] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.908590] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [212.909358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [212.910154] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [212.910764] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [212.911588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [212.913953] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.914537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.924971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.925144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.925702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [212.930310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [212.961450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [212.961456] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [212.961459] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [212.961461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [212.961464] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [212.961466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [212.961470] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [212.961472] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [212.961476] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [212.961686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.961825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [212.962139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [212.962267] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.962288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [212.967237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [213.034908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.035605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.041630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.043080] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [213.043812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [213.044558] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [213.045250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [213.045932] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.138535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.139010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [213.139616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [213.140304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [213.141078] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.141779] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.142513] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.143287] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.143955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [213.144613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [213.145265] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [213.146044] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [213.146914] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.147050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.155661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.155836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.156377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [213.160904] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [213.193335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [213.193341] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [213.193344] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [213.193346] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [213.193349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [213.193351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [213.193355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [213.193358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [213.193361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [213.193576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.194071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [213.194403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.194532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.194555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [213.200140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [213.266831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.267477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.273446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.274807] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [213.275067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [213.275346] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [213.275484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [213.275664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.369327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.369762] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [213.370367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [213.371053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [213.371815] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.372484] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.373300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.374059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.374782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [213.375450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [213.376163] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [213.377039] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [213.379320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.379991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.390412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.390619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.390895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [213.395507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [213.428127] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [213.428133] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [213.428135] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [213.428138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [213.428140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [213.428143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [213.428146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [213.428149] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [213.428152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [213.428353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.428476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [213.429035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.429163] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.429185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [213.434995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [213.538832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.539477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.545430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.546902] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [213.547578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [213.548276] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [213.548824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [213.549390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [213.593054] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS

<7> [213.597937] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [213.598532] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [213.599186] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:398:DDI TC1/PHY C] [CRTC:150:pipe A]

<7> [213.599771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [213.600487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [213.601147] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [213.601910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [213.602518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [213.603305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [213.603917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [213.604617] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)

<7> [213.605235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [213.605373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)

<7> [213.605532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [213.605688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)

<7> [213.605833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [213.605971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [213.606104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [213.606236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [213.606399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [213.606548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [213.606686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [213.606819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)

<7> [213.606963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [213.607093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)

<7> [213.607257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [213.607389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)

<7> [213.607529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [213.607677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [213.607815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [213.607979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [213.608115] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [213.608257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [213.608392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [213.608542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [213.608675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [213.608837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [213.608980] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [213.609118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36)

<7> [213.609255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)

<7> [213.609397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)

<7> [213.609530] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 222750)

<7> [213.609709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [213.609844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006)

<7> [213.609987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in avi infoframe

<7> [213.610126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [213.610258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [213.610421] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [213.610434] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [213.610441] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [213.610443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in spd infoframe

<7> [213.610618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [213.610760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [213.610900] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [213.610904] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [213.610906] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hdmi infoframe

<7> [213.611039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [213.611170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [213.611300] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [213.611304] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [213.611500] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [213.611658] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [213.611792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012

<7> [213.611931] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36

<7> [213.612066] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [213.612221] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0

<7> [213.612350] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0

<7> [213.612487] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0

<7> [213.612653] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 594000 num active planes 1

<7> [213.612797] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 594

<7> [213.612961] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [213.613113] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 192000 kHz

<7> [213.613278] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [213.613425] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [213.613572] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [213.613706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [213.613880] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0

<7> [213.614020] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0

<7> [213.614161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [213.614295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [213.614431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [213.614587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [213.614719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [213.614862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [213.615023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [213.615162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [213.615297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x6

<7> [213.615437] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [213.615450] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [213.615456] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [213.615458] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [213.615462] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [213.615464] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [213.615466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [213.615619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [213.615751] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 07 00 00 00

<7> [213.615886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [213.616042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [213.616201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [213.616338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [213.616483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [213.616641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [213.616774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [213.616936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [213.617067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [213.617207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [213.617341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [213.617481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0

<7> [213.617650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [213.617783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [213.617927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [213.618063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [213.618203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [213.618338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [213.618502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [213.618760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [213.618899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [213.619041] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [213.619171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [213.619332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [213.619463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [213.619613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [213.619749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [213.619889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [213.620052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [213.620185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:415] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [213.620326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [213.620458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [213.620612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [213.620766] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [213.620904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [213.621037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [213.621172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [213.632648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.632836] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [213.632982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [213.633163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [213.633395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.633630] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.633833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.634079] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [213.634258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [213.634667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [213.634828] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [213.635349] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [213.636094] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.636261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.644861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.645081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.645222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.646190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.647723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [213.647948] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 768000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [213.648631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B]

<7> [213.648789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C]

<7> [213.648926] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D]

<7> [213.649066] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A]

<7> [213.649231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B]

<7> [213.649366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C]

<7> [213.649562] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [213.649801] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [213.649972] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [213.650388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [213.650623] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [213.651576] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [213.651723] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [213.668584] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:399:HDMI-A-2][ENCODER:398:DDI TC1/PHY C] Enable audio codec on [CRTC:150:pipe A], 36 bytes ELD

<7> [213.684942] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [213.685250] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<7> [213.685655] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [213.686047] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [213.687429] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [213.687457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [213.692134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [213.698924] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [213.703577] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [213.703621] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [213.718059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [213.718066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 30.

<7> [213.718069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 36.

<7> [213.718072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does deep color 48.

<7> [213.718075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [213.718077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [213.718081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor Mi TV

<7> [213.718088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [213.718092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 3

<7> [213.718340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.718530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [213.718884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [213.719069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [213.719204] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

<6> [213.735030] Console: switching to colour frame buffer device 240x67

<7> [213.734960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [213.739227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

Results for igt@i915_pm_rpm@system-suspend-execbuf