igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	55.08 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.3-g476cbad7c (x86_64) (Linux: 7.0.0-rc3-CI_DRM_18116-g77e176657e78+ x86_64)
Out	Using IGT_SRANDOM=1773156025 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888142025820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.556s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.514s) Subtest gem-execbuf-stress: SUCCESS (55.079s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.556s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.514s) Subtest gem-execbuf-stress: SUCCESS (55.079s)
Dmesg	<6> [475.737799] Console: switching to colour dummy device 80x25 <6> [475.738173] [IGT] i915_pm_rpm: executing <7> [475.739458] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [475.739940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [475.739947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [475.744165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [475.744208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] <7> [475.744214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [475.770054] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [475.770064] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [475.770067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [475.770070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [475.770275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [475.770434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [475.770784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [475.770935] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [475.771303] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [475.771309] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [475.771316] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [475.771322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes: <7> [475.771325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [475.771328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [475.771331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [475.771333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [475.771335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [475.771338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [475.771340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [475.771343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [475.771345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [475.771348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [475.771350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [475.771353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [475.771355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [475.771365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [475.771368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [475.771370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.771373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.771375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.771377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [475.771380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [475.771382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [475.771385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [475.771387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [475.771389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [475.771393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [475.771396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [475.771398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [475.771401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.771403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.771406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.771408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [475.771456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [475.771459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [475.775661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [475.775697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [475.775700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [475.779937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [475.783661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [475.783669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [475.787881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [475.788263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [475.788266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [475.792486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [475.792733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [475.792736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [475.796958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [475.797249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] <7> [475.797252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [475.801494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected <7> [475.801505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] <7> [475.801509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [475.827261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [475.827269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [475.827272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [475.827275] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [475.827477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [475.827623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [475.827959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [475.828108] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [475.828473] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [475.828480] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [475.828487] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [475.828493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes: <7> [475.828496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [475.828498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [475.828501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [475.828503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [475.828506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [475.828508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [475.828511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [475.828513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [475.828516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [475.828518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [475.828521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [475.828523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [475.828526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [475.828528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [475.828530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [475.828533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.828535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.828538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [475.828540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [475.828542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [475.828545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [475.828547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [475.828550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [475.828552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [475.828555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [475.828557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [475.828559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [475.828562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.828564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.828567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [475.828569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [475.828592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] <7> [475.828595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [475.832828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected <7> [475.832840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] <7> [475.832843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [475.837043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected <7> [475.837335] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:416] <7> [476.851982] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [476.852244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [476.853044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [476.853748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [476.854431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [476.855093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [476.855803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [476.856139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [476.856296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [476.856460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [476.856615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [476.856770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [476.856923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [476.857077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [476.857229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [476.857392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [476.857553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [476.857713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [476.857870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [476.858025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [476.858180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [476.858345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [476.858504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [476.858659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [476.858813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [476.858967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [476.859119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [476.859273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [476.859432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [476.859585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [476.859738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [476.859890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [476.860042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [476.860194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [476.860353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [476.860514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [476.860672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [476.860827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [476.860987] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [476.861147] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7> [476.861327] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [476.861490] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [476.861662] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [476.861816] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [476.861968] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [476.862119] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [476.862269] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [476.862436] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [476.862602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [476.862759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [476.862935] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [476.863108] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [476.863269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset] <7> [476.863434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [476.863593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [476.863753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [476.863910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [476.864067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [476.864221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [476.882385] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [476.901508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [476.902238] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [476.903042] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [476.903775] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [476.904477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B] <7> [476.905134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C] <7> [476.905870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D] <7> [476.906542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A] <7> [476.907187] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B] <7> [476.907878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C] <7> [476.908541] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2] <7> [476.909450] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [476.910242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [476.911035] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [476.912535] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [476.912923] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [477.012660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [477.013456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.014134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.016010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.017068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.021032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.022371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.022644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.022953] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.023154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.023446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [477.118001] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [477.119926] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [477.120475] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [477.135917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [477.136851] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [477.137594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [477.138316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [477.139130] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.139932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.140724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.141533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.142297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [477.143378] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [477.144034] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [477.145439] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [477.147349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.147921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.159410] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [477.159855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [477.160089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [477.164643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [477.175874] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [477.194191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [477.194203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [477.194208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [477.194212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [477.195384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.195559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [477.195903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.196070] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [477.196106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [477.201427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [477.206462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [477.207487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.208994] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [477.209110] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [477.276771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [477.277571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.278264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.280138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.281201] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.288828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.290516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.291558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.292570] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.293313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.293991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [477.321737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [477.322275] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [477.323025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [477.323776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [477.324571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.325360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.326129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.326920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.327687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [477.328761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [477.329431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [477.330226] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [477.332394] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.333059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.343629] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [477.343862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [477.344854] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [477.345035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [477.349559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [477.379920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [477.379931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [477.379935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [477.379938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [477.380145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.380296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [477.380672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.380821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [477.380845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [477.385204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [477.452582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.453453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.460948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.462880] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.463794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.464852] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.465808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.466866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [477.561541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [477.562054] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [477.562804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [477.563827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [477.564919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.566015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.566849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.567829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.568864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [477.570845] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [477.571610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [477.573404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [477.575951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.576724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.584497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [477.584970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [477.585266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [477.586742] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [477.589794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [477.621623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [477.621633] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [477.621636] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [477.621639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [477.621846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.621993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [477.622354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.622505] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [477.622528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [477.627669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [477.692581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.693778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.700114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.701680] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.702498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.703358] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.704016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.704760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [477.801517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [477.802037] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [477.802781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [477.803526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [477.804296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.805097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.805874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.806642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [477.807398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [477.808891] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [477.809053] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [477.809454] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [477.810181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [477.810364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [477.819006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [477.819205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [477.819650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [477.820449] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [477.824251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [477.853933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [477.853944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [477.853947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [477.853950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [477.854159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.854305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [477.855091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [477.855240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [477.855263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [477.859740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [477.924642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [477.925820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [477.932161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [477.933736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [477.934554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [477.935413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [477.936074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [477.936818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [478.034972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [478.035546] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [478.036247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [478.037008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [478.037934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.038769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.039553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.040382] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.041152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [478.041972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [478.042450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [478.042749] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [478.043459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [478.043616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [478.051037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [478.051214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [478.051632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [478.053728] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [478.056204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [478.086006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [478.086016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [478.086020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [478.086023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [478.086229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.086811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [478.087156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.087317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [478.087341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [478.091743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [478.156647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [478.157097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [478.162942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [478.164504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [478.165338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [478.166175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [478.166890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [478.167630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [478.269114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [478.269708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [478.270429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [478.271155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [478.271956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.272739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.273503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.274250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.275023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [478.275812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [478.276513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [478.277347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [478.279469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [478.280127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [478.289329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [478.289609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [478.290318] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [478.290624] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [478.295365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [478.325924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [478.325934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [478.325937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [478.325940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [478.326144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.326290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [478.327320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.327474] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [478.327497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [478.331977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [478.396491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [478.397283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [478.403424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [478.404769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [478.405156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [478.405473] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [478.405638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [478.405852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [478.508277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [478.508866] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [478.509601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [478.510435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [478.511264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.512080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.512950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.513762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.514593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [478.515365] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [478.516105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [478.517017] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [478.519202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [478.519915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [478.530326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [478.530563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [478.531059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [478.532123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [478.535745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [478.567656] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [478.567667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [478.567670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [478.567673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [478.567882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.568031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [478.568361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.568532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [478.568554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [478.573725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [478.636503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [478.637341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [478.644841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [478.646754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [478.647574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [478.648444] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [478.649108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [478.649874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [478.747496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [478.748010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [478.748754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [478.749581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [478.750398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.751178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.752001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.752781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.753574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [478.754356] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [478.754975] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [478.755237] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [478.755963] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [478.756124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [478.763537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [478.763768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [478.764272] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [478.764506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [478.769065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [478.800890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [478.800901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [478.800904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [478.800907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [478.801117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.801261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [478.802345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [478.802496] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [478.802521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [478.807026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [478.868471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [478.869268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [478.875361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [478.876889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [478.877722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [478.878600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [478.879261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [478.880002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [478.980484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [478.981003] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [478.981745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [478.982587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [478.983431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.984189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.984986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.985847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [478.986243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [478.986528] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [478.986689] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [478.987047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [478.987760] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [478.987919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [478.997771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [478.998005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [478.998312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [478.999082] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [479.002898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [479.035103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [479.035114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [479.035117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [479.035120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [479.035340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.035501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [479.035833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.035982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.036005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [479.040827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [479.108570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [479.109454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [479.117856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [479.119626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [479.120445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [479.121320] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [479.121980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [479.122735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [479.215466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [479.215977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [479.216710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [479.217451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [479.218214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.219011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.219778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.220570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.221465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [479.222521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [479.223228] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [479.224096] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [479.226262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [479.226962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [479.237366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [479.237579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [479.238030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [479.239046] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [479.242663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [479.272504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [479.272515] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [479.272519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [479.272522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [479.272741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.272901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [479.273239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.273417] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.273441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [479.278205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [479.348669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [479.349509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [479.356720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [479.358107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [479.358930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [479.359857] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [479.360552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [479.361205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [479.454366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [479.454883] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [479.455644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [479.456400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [479.457162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.457969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.458744] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.459524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.460239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [479.461036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [479.461492] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [479.461767] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [479.462484] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [479.462645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [479.471296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [479.471504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [479.472030] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [479.472286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [479.476875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [479.522759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [479.522772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [479.522775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [479.522779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [479.522987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.524115] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [479.524463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.525343] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.525366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [479.530132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [479.580663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [479.581493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [479.587480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [479.588856] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [479.589112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [479.589433] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [479.589600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [479.589798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [479.678154] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [479.680553] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [479.680965] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [479.694375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [479.694587] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [479.694873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [479.695187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [479.695579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.695923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.696279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.696613] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.696927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [479.697524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [479.697800] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [479.698386] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [479.699467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [479.699735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [479.708477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [479.708669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [479.708958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [479.713466] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [479.713509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [479.745438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [479.745447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [479.745450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [479.745453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [479.745656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.745807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [479.746139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.746297] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.746453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [479.751580] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [479.756531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [479.757559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [479.758981] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [479.759074] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [479.820630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [479.821421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [479.822107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [479.823981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [479.825041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [479.832649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [479.834600] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [479.835452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [479.836335] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [479.837005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [479.837573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [479.872459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [479.872977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [479.873722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [479.874519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [479.875308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.876070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.876851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.877631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [479.878425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [479.879189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [479.879889] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [479.880730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [479.882902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [479.883586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [479.893932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [479.894146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [479.895282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [479.896608] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [479.899914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [479.945399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [479.945410] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [479.945413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [479.945416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [479.945627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.946721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [479.947063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [479.947949] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.947972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [479.952747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [480.004563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [480.005394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [480.011423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [480.013143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [480.013995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [480.014917] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [480.015718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [480.016490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [485.113218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [485.113792] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [485.114598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [485.115413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [485.116274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [485.117110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [485.117965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [485.118813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [485.119079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [485.119355] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [485.119517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [485.119803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [485.120526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [485.120685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [485.128078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [485.128364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [485.128915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [485.131133] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [485.133553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [485.163465] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [485.163475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [485.163479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [485.163482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [485.163683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [485.163828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [485.164174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [485.164324] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [485.164349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [485.169138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [485.236528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [485.237364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [485.243378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [485.244759] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [485.245063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [485.245404] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [485.245569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [485.245771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [488.383169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [488.396576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [488.397466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [488.398224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [488.399262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [488.400379] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [488.401216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [488.401526] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [488.401831] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [488.402140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [488.402743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [488.402963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [488.403594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [488.404378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [488.404539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [488.415599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [488.415785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [488.420607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [488.451401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [488.451412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [488.451416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [488.451421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [488.451637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [488.451787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [488.452121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [488.452338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [488.452378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [488.457465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [488.462696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [488.467286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [488.496886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [488.496894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [488.496898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [488.496901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [488.497112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [488.497317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [488.497711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [488.497924] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [488.497961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [488.502942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [488.507819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [488.508265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [488.511466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [488.512818] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [488.513165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [488.513471] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [488.513633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [488.513828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [490.346746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [490.347338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [490.348066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [490.348789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [490.349594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [490.350390] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [490.351158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [490.351913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [490.352447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [490.352711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [490.352873] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [490.353185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [490.353899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [490.354065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [490.360275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [490.360409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [490.360713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [490.361584] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [490.365232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [490.397272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [490.397282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [490.397285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [490.397288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [490.397498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [490.397646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [490.397989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [490.398468] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [490.398493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [490.403281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [490.469291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [490.470154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [490.477351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [490.478771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [490.479147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [490.479455] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [490.479619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [490.479866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [495.575921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [495.576438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [495.577185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [495.577968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [495.578748] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [495.579563] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [495.580339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [495.581108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [495.581517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [495.581786] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [495.581962] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [495.582232] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [495.582945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [495.583102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [495.589277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [495.589410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [495.589709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [495.590591] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [495.594240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [495.637383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [495.637393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [495.637396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [495.637400] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [495.637636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [495.638763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [495.639117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [495.640010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [495.640035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [495.644778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [495.700070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [495.701705] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [495.707802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [495.709433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [495.710268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [495.711175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [495.711889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [495.712607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [498.619918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [498.631951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [498.632471] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [498.633242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [498.633993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [498.634794] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [498.635567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [498.636361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [498.637140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [498.637535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [498.638021] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [498.638188] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [498.638577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [498.639322] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [498.639485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [498.645660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [498.645814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [498.650627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [498.696102] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [498.696111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [498.696115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [498.696117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [498.697316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.697466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [498.698524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.698675] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [498.698696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [498.703428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [498.708325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [498.713196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [498.758618] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [498.758627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [498.758630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [498.758633] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [498.758840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.758986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [498.759948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [498.760097] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [498.760117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [498.764857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [498.769735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [498.769908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [498.773387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [498.774752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [498.775051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [498.775357] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [498.775519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [498.775714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [500.806239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [500.806814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [500.807518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [500.808283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [500.809073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [500.809858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [500.810604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [500.811386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [500.812102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [500.812365] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [500.812522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [500.812918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [500.813634] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [500.813805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [500.819999] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [500.820132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [500.820442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [500.821185] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [500.824944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [500.856043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [500.856053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [500.856056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [500.856059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [500.856268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [500.856411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [500.857132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [500.857280] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [500.857303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [500.862042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [500.931969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [500.932806] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [500.939994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [500.941386] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [500.941876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [500.942184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [500.942349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [500.942573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [506.036713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [506.037230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [506.037971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [506.038736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [506.039585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [506.040417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [506.041261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [506.042055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [506.042254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [506.042514] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [506.042710] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [506.042982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [506.043695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [506.043853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [506.050028] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [506.050157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [506.050452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [506.051351] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [506.055008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [506.100519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [506.100529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [506.100532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [506.100546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [506.100769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [506.101896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [506.102238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [506.103126] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [506.103150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [506.107913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [506.155910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [506.156738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [506.162759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [506.164148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [506.164499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [506.164883] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [506.165074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [506.165269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [508.859602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [508.871570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [508.872098] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [508.872884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [508.873938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [508.875060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [508.876196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [508.877316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [508.877719] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [508.877988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [508.878335] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [508.878580] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [508.878929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [508.879751] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [508.879979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [508.887460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [508.887653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [508.892423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [508.923373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [508.923383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [508.923386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [508.923389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [508.924356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [508.924575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [508.924962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [508.925180] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [508.925219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [508.930486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [508.935381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [508.940245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [508.971248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [508.971257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [508.971260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [508.971263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [508.971501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [508.971709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [508.972108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [508.972327] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [508.972363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [508.977028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [508.981914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [508.982158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [508.986675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [508.988091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [508.988365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [508.988680] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [508.988874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [508.989138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [511.267132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [511.267771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [511.268577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [511.269494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [511.270428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [511.271319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [511.272188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [511.272886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [511.273099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [511.273371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [511.273567] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [511.273859] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [511.274590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [511.274746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [511.283374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [511.283570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [511.284086] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [511.284302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [511.288934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [511.320029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [511.320040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [511.320043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [511.320046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [511.320247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [511.320672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [511.321017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [511.321172] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [511.321195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [511.325623] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [511.395579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [511.396442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [511.402489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [511.404026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [511.404884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [511.405782] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [511.406465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [511.407202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [516.501182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [516.501813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [516.502605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [516.503325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [516.504025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [516.504258] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [516.504489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [516.504709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [516.504910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [516.505175] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [516.505331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [516.505686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [516.506586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [516.507257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [516.517707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [516.518052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [516.518617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [516.522040] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [516.523309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [516.568872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [516.568883] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [516.568887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [516.568890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [516.569099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [516.570233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [516.570572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [516.571436] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [516.571466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [516.576243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [516.627815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [516.628656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [516.634694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [516.636066] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [516.636424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [516.636810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [516.637002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [516.637198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [519.100490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [519.112705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [519.113226] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [519.113991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [519.115064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [519.116197] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [519.117328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [519.118450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [519.119052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [519.119337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [519.119714] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [519.119935] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [519.120283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [519.121097] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [519.121282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [519.131148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [519.131274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [519.136107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [519.166027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [519.166037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [519.166040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [519.166043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [519.166248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [519.166390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [519.166939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [519.167154] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [519.167193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [519.171711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [519.176621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [519.181477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [519.212378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [519.212387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [519.212390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [519.212393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [519.213514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [519.213719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [519.214114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [519.214331] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [519.214367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [519.220809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [519.225718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [519.225994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [519.229333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [519.230684] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [519.230989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [519.231294] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [519.231456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [519.231666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [521.737755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [521.738319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [521.739140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [521.739905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [521.740754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [521.741578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [521.742246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [521.742465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [521.742674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [521.742937] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [521.743099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [521.743368] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [521.744077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [521.744235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [521.750405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [521.750547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [521.750726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [521.752934] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [521.755377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [521.786252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [521.786263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [521.786266] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [521.786269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [521.786479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [521.787142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [521.787485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [521.787657] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [521.787679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [521.792055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [521.859722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [521.860275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [521.866335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [521.867680] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [521.868010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [521.868313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [521.868480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [521.868761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [526.967804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [526.968369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [526.969195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [526.970045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [526.970903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [526.971767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [526.972228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [526.972446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [526.972662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [526.972934] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [526.973087] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [526.973350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [526.974078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [526.974231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [526.984573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [526.984982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [526.985619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [526.987956] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [526.990379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [527.035964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [527.035976] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [527.035979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [527.035982] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [527.037173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [527.037339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [527.038394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [527.038573] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [527.038608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [527.043326] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [527.091995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [527.092522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [527.098463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [527.099824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [527.100161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [527.100469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [527.100649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [527.100850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [529.339873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [529.352777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [529.353301] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [529.354052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [529.354803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [529.355584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [529.356417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [529.357214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [529.358002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [529.358748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [529.359090] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [529.359254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [529.359547] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [529.360275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [529.360434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [529.366605] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [529.366736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [529.371564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [529.403466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [529.403477] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [529.403481] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [529.403484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [529.403692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [529.403854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [529.404191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [529.404352] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [529.404377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [529.409564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [529.414455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <7> [529.419298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [529.450268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [529.450277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [529.450280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [529.450283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [529.450488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [529.451097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [529.451455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [529.451612] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [529.451635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [529.456061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3] <7> [529.460933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [529.461108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [529.464554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [529.465907] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [529.466206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [529.466511] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [529.466686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [529.466889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [532.196672] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [532.198704] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [532.201203] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:399:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [532.201416] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [532.201573] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [532.201768] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:398:DDI TC1/PHY C] [CRTC:150:pipe A] <7> [532.201929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [532.202101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [532.202259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [532.202415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [532.202570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [532.202735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [532.202889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [532.203044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [532.203197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [532.203350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [532.203507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [532.203679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [532.203836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [532.203991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [532.204146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [532.204301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [532.204454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [532.204615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [532.204769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [532.204929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [532.205087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [532.205242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [532.205397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [532.205550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [532.205722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [532.205877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [532.206032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [532.206192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [532.206351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [532.206507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [532.206670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [532.206824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [532.206978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [532.207131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [532.207284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [532.207438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [532.207595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [532.207769] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [532.207954] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [532.208108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [532.208262] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [532.208412] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [532.208562] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [532.208801] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [532.209001] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [532.209207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [532.209437] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 559716 num active planes 1 <7> [532.209627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [532.209784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [532.209955] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [532.210126] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [532.210283] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7> [532.210445] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7> [532.210614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7> [532.210774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [532.210930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [532.211086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [532.211240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [532.211394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [532.211547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [532.211712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [532.211866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [532.212018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [532.212172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [532.212326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [532.212479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [532.212752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [532.212906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [532.213065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [532.213225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [532.213382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [532.213538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [532.213725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [532.213879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [532.214033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [532.214187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [532.214339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [532.214493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [532.214654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [532.214807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [532.214961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.215116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.215276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.215432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [532.215587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [532.215755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.215909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.216061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [532.216214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [532.216367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [532.216519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:415] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [532.216684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [532.216844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [532.217004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [532.217160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [532.217315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [532.217469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [532.217629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [532.229751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [532.229874] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [532.230041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [532.230235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [532.230493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [532.230737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [532.230960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [532.231181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [532.231386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [532.231652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [532.231810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [532.232371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [532.233109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [532.233273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [532.239436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [532.239848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [532.240064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [532.240816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [532.242219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [532.242390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B] <7> [532.242548] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C] <7> [532.242712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D] <7> [532.242867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A] <7> [532.243022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B] <7> [532.243174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C] <7> [532.243375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [532.243631] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [532.243796] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [532.244013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [532.244209] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [532.245044] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [532.245214] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [532.264529] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2] <7> [532.265016] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [532.266443] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [532.266484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1] <6> [532.268147] [IGT] i915_pm_rpm: exiting, ret=0 <7> [532.271013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2] <7> [532.296863] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [532.296872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [532.296875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k <7> [532.296878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0 <7> [532.297082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [532.297231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [532.297562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [532.297742] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <6> [532.302091] Console: switching to colour frame buffer device 240x67 <7> [532.302011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1] <7> [532.306290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [475.739940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [475.739947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [475.744165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [475.744208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]

<7> [475.744214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [475.770054] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [475.770064] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [475.770067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [475.770070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [475.770275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [475.770434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [475.770784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [475.770935] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [475.771303] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [475.771309] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [475.771316] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [475.771322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes:

<7> [475.771325] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [475.771328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [475.771331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [475.771333] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [475.771335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [475.771338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [475.771340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [475.771343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [475.771345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [475.771348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [475.771350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [475.771353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [475.771355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [475.771365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [475.771368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [475.771370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.771373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.771375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.771377] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [475.771380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [475.771382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [475.771385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [475.771387] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [475.771389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [475.771393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [475.771396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [475.771398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [475.771401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.771403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.771406] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.771408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [475.771456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [475.771459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [475.775661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [475.775697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [475.775700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [475.779937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [475.783661] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [475.783669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [475.787881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [475.788263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [475.788266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [475.792486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [475.792733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [475.792736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [475.796958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [475.797249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]

<7> [475.797252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [475.801494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] disconnected

<7> [475.801505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]

<7> [475.801509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [475.827261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [475.827269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [475.827272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [475.827275] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [475.827477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [475.827623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [475.827959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [475.828108] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [475.828473] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [475.828480] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [475.828487] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [475.828493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] probed modes:

<7> [475.828496] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [475.828498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [475.828501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [475.828503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [475.828506] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [475.828508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [475.828511] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [475.828513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [475.828516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [475.828518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [475.828521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [475.828523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [475.828526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [475.828528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [475.828530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [475.828533] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.828535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.828538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [475.828540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [475.828542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [475.828545] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [475.828547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [475.828550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [475.828552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [475.828555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [475.828557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [475.828559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [475.828562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.828564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.828567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [475.828569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [475.828592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]

<7> [475.828595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [475.832828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected

<7> [475.832840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]

<7> [475.832843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [475.837043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected

<7> [476.851982] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [476.852244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [476.853044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [476.853748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [476.854431] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [476.855093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [476.855803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [476.856139] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [476.856296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [476.856460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [476.856615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [476.856770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [476.856923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [476.857077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [476.857229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [476.857392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [476.857553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [476.857713] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [476.857870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [476.858025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [476.858180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [476.858345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [476.858504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [476.858659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [476.858813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [476.858967] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [476.859119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [476.859273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [476.859432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [476.859585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [476.859738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [476.859890] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [476.860042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [476.860194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [476.860353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [476.860514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [476.860672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [476.860827] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [476.860987] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [476.861147] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0

<7> [476.861327] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [476.861490] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [476.861662] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [476.861816] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [476.861968] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [476.862119] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [476.862269] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [476.862436] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [476.862602] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [476.862759] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [476.862935] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [476.863108] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [476.863269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]

<7> [476.863434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [476.863593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [476.863753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [476.863910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [476.864067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [476.864221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [476.882385] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [476.901508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [476.902238] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [476.903042] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [476.903775] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [476.904477] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B]

<7> [476.905134] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C]

<7> [476.905870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D]

<7> [476.906542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A]

<7> [476.907187] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B]

<7> [476.907878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C]

<7> [476.908541] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [476.909450] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [476.910242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [476.911035] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [476.912535] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [476.912923] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [477.012660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [477.013456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.014134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.016010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.017068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.021032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.022371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.022644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.022953] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.023154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.023446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [477.118001] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [477.135917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [477.136851] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [477.137594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [477.138316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [477.139130] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.139932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.140724] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.141533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.142297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [477.143378] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [477.144034] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [477.145439] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [477.147349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.147921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.159410] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [477.159855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [477.160089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [477.164643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [477.175874] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [477.194191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [477.194203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [477.194208] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [477.194212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [477.195384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.195559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [477.195903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.196070] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [477.196106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [477.201427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [477.206462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [477.207487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.208994] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [477.209110] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [477.276771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [477.277571] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.278264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.280138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.281201] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.288828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.290516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.291558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.292570] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.293313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.293991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [477.321737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [477.322275] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [477.323025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [477.323776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [477.324571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.325360] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.326129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.326920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.327687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [477.328761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [477.329431] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [477.330226] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [477.332394] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.333059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.343629] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [477.343862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [477.344854] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [477.345035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [477.349559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [477.379920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [477.379931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [477.379935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [477.379938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [477.380145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.380296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [477.380672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.380821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [477.380845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [477.385204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [477.452582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.453453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.460948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.462880] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.463794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.464852] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.465808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.466866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [477.561541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [477.562054] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [477.562804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [477.563827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [477.564919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.566015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.566849] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.567829] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.568864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [477.570845] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [477.571610] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [477.573404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [477.575951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.576724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.584497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [477.584970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [477.585266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [477.586742] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [477.589794] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [477.621623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [477.621633] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [477.621636] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [477.621639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [477.621846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.621993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [477.622354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.622505] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [477.622528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [477.627669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [477.692581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.693778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.700114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.701680] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.702498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.703358] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.704016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.704760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [477.801517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [477.802037] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [477.802781] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [477.803526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [477.804296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.805097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.805874] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.806642] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [477.807398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [477.808891] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [477.809053] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [477.809454] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [477.810181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [477.810364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [477.819006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [477.819205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [477.819650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [477.820449] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [477.824251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [477.853933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [477.853944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [477.853947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [477.853950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [477.854159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.854305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [477.855091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [477.855240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [477.855263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [477.859740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [477.924642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [477.925820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [477.932161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [477.933736] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [477.934554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [477.935413] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [477.936074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [477.936818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [478.034972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [478.035546] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [478.036247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [478.037008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [478.037934] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.038769] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.039553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.040382] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.041152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [478.041972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [478.042450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [478.042749] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [478.043459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [478.043616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [478.051037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [478.051214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [478.051632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [478.053728] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [478.056204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [478.086006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [478.086016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [478.086020] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [478.086023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [478.086229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.086811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [478.087156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.087317] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [478.087341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [478.091743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [478.156647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [478.157097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [478.162942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [478.164504] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [478.165338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [478.166175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [478.166890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [478.167630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [478.269114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [478.269708] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [478.270429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [478.271155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [478.271956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.272739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.273503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.274250] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.275023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [478.275812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [478.276513] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [478.277347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [478.279469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [478.280127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [478.289329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [478.289609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [478.290318] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [478.290624] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [478.295365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [478.325924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [478.325934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [478.325937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [478.325940] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [478.326144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.326290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [478.327320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.327474] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [478.327497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [478.331977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [478.396491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [478.397283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [478.403424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [478.404769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [478.405156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [478.405473] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [478.405638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [478.405852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [478.508277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [478.508866] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [478.509601] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [478.510435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [478.511264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.512080] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.512950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.513762] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.514593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [478.515365] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [478.516105] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [478.517017] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [478.519202] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [478.519915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [478.530326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [478.530563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [478.531059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [478.532123] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [478.535745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [478.567656] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [478.567667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [478.567670] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [478.567673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [478.567882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.568031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [478.568361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.568532] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [478.568554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [478.573725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [478.636503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [478.637341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [478.644841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [478.646754] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [478.647574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [478.648444] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [478.649108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [478.649874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [478.747496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [478.748010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [478.748754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [478.749581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [478.750398] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.751178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.752001] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.752781] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.753574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [478.754356] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [478.754975] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [478.755237] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [478.755963] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [478.756124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [478.763537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [478.763768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [478.764272] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [478.764506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [478.769065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [478.800890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [478.800901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [478.800904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [478.800907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [478.801117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.801261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [478.802345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [478.802496] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [478.802521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [478.807026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [478.868471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [478.869268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [478.875361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [478.876889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [478.877722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [478.878600] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [478.879261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [478.880002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [478.980484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [478.981003] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [478.981745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [478.982587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [478.983431] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.984189] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.984986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.985847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [478.986243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [478.986528] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [478.986689] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [478.987047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [478.987760] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [478.987919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [478.997771] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [478.998005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [478.998312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [478.999082] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [479.002898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [479.035103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [479.035114] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [479.035117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [479.035120] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [479.035340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.035501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [479.035833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.035982] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.036005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [479.040827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [479.108570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [479.109454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [479.117856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [479.119626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [479.120445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [479.121320] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [479.121980] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [479.122735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [479.215466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [479.215977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [479.216710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [479.217451] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [479.218214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.219011] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.219778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.220570] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.221465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [479.222521] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [479.223228] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [479.224096] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [479.226262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [479.226962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [479.237366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [479.237579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [479.238030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [479.239046] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [479.242663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [479.272504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [479.272515] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [479.272519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [479.272522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [479.272741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.272901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [479.273239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.273417] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.273441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [479.278205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [479.348669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [479.349509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [479.356720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [479.358107] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [479.358930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [479.359857] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [479.360552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [479.361205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [479.454366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [479.454883] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [479.455644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [479.456400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [479.457162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.457969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.458744] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.459524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.460239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [479.461036] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [479.461492] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [479.461767] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [479.462484] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [479.462645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [479.471296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [479.471504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [479.472030] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [479.472286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [479.476875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [479.522759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [479.522772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [479.522775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [479.522779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [479.522987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.524115] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [479.524463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.525343] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.525366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [479.530132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [479.580663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [479.581493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [479.587480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [479.588856] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [479.589112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [479.589433] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [479.589600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [479.589798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [479.680553] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [479.694375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [479.694587] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [479.694873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [479.695187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [479.695579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.695923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.696279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.696613] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.696927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [479.697524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [479.697800] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [479.698386] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [479.699467] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [479.699735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [479.708477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [479.708669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [479.708958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [479.713466] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [479.713509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [479.745438] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [479.745447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [479.745450] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [479.745453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [479.745656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.745807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [479.746139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.746297] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.746453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [479.751580] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [479.756531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [479.757559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [479.758981] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [479.759074] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [479.820630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [479.821421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [479.822107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [479.823981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [479.825041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [479.832649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [479.834600] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [479.835452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [479.836335] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [479.837005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [479.837573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [479.872459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [479.872977] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [479.873722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [479.874519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [479.875308] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.876070] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.876851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.877631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [479.878425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [479.879189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [479.879889] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [479.880730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [479.882902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [479.883586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [479.893932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [479.894146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [479.895282] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [479.896608] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [479.899914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [479.945399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [479.945410] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [479.945413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [479.945416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [479.945627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.946721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [479.947063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [479.947949] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.947972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [479.952747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [480.004563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [480.005394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [480.011423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [480.013143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [480.013995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [480.014917] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [480.015718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [480.016490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [485.113218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [485.113792] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [485.114598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [485.115413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [485.116274] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [485.117110] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [485.117965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [485.118813] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [485.119079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [485.119355] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [485.119517] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [485.119803] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [485.120526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [485.120685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [485.128078] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [485.128364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [485.128915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [485.131133] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [485.133553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [485.163465] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [485.163475] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [485.163479] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [485.163482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [485.163683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [485.163828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [485.164174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [485.164324] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [485.164349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [485.169138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [485.236528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [485.237364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [485.243378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [485.244759] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [485.245063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [485.245404] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [485.245569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [485.245771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [488.383169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [488.396576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [488.397466] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [488.398224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [488.399262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [488.400379] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [488.401216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [488.401526] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [488.401831] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [488.402140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [488.402743] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [488.402963] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [488.403594] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [488.404378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [488.404539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [488.415599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [488.415785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [488.420607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [488.451401] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [488.451412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [488.451416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [488.451421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [488.451637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [488.451787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [488.452121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [488.452338] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [488.452378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [488.457465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [488.462696] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [488.467286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [488.496886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [488.496894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [488.496898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [488.496901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [488.497112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [488.497317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [488.497711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [488.497924] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [488.497961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [488.502942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [488.507819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [488.508265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [488.511466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [488.512818] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [488.513165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [488.513471] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [488.513633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [488.513828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [490.346746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [490.347338] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [490.348066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [490.348789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [490.349594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [490.350390] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [490.351158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [490.351913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [490.352447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [490.352711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [490.352873] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [490.353185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [490.353899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [490.354065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [490.360275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [490.360409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [490.360713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [490.361584] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [490.365232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [490.397272] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [490.397282] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [490.397285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [490.397288] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [490.397498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [490.397646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [490.397989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [490.398468] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [490.398493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [490.403281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [490.469291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [490.470154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [490.477351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [490.478771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [490.479147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [490.479455] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [490.479619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [490.479866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [495.575921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [495.576438] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [495.577185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [495.577968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [495.578748] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [495.579563] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [495.580339] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [495.581108] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [495.581517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [495.581786] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [495.581962] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [495.582232] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [495.582945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [495.583102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [495.589277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [495.589410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [495.589709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [495.590591] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [495.594240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [495.637383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [495.637393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [495.637396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [495.637400] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [495.637636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [495.638763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [495.639117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [495.640010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [495.640035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [495.644778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [495.700070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [495.701705] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [495.707802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [495.709433] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [495.710268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [495.711175] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [495.711889] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [495.712607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [498.619918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [498.631951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [498.632471] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [498.633242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [498.633993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [498.634794] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [498.635567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [498.636361] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [498.637140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [498.637535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [498.638021] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [498.638188] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [498.638577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [498.639322] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [498.639485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [498.645660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [498.645814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [498.650627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [498.696102] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [498.696111] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [498.696115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [498.696117] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [498.697316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.697466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [498.698524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.698675] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [498.698696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [498.703428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [498.708325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [498.713196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [498.758618] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [498.758627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [498.758630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [498.758633] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [498.758840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.758986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [498.759948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [498.760097] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [498.760117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [498.764857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [498.769735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [498.769908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [498.773387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [498.774752] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [498.775051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [498.775357] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [498.775519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [498.775714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [500.806239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [500.806814] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [500.807518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [500.808283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [500.809073] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [500.809858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [500.810604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [500.811386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [500.812102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [500.812365] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [500.812522] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [500.812918] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [500.813634] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [500.813805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [500.819999] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [500.820132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [500.820442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [500.821185] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [500.824944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [500.856043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [500.856053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [500.856056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [500.856059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [500.856268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [500.856411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [500.857132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [500.857280] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [500.857303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [500.862042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [500.931969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [500.932806] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [500.939994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [500.941386] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [500.941876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [500.942184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [500.942349] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [500.942573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [506.036713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [506.037230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [506.037971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [506.038736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [506.039585] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [506.040417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [506.041261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [506.042055] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [506.042254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [506.042514] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [506.042710] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [506.042982] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [506.043695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [506.043853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [506.050028] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [506.050157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [506.050452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [506.051351] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [506.055008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [506.100519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [506.100529] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [506.100532] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [506.100546] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [506.100769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [506.101896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [506.102238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [506.103126] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [506.103150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [506.107913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [506.155910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [506.156738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [506.162759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [506.164148] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [506.164499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [506.164883] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [506.165074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [506.165269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [508.859602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [508.871570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [508.872098] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [508.872884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [508.873938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [508.875060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [508.876196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [508.877316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [508.877719] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [508.877988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [508.878335] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [508.878580] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [508.878929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [508.879751] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [508.879979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [508.887460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [508.887653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [508.892423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [508.923373] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [508.923383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [508.923386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [508.923389] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [508.924356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [508.924575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [508.924962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [508.925180] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [508.925219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [508.930486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [508.935381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [508.940245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [508.971248] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [508.971257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [508.971260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [508.971263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [508.971501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [508.971709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [508.972108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [508.972327] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [508.972363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [508.977028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [508.981914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [508.982158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [508.986675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [508.988091] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [508.988365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [508.988680] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [508.988874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [508.989138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [511.267132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [511.267771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [511.268577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [511.269494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [511.270428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [511.271319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [511.272188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [511.272886] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [511.273099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [511.273371] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [511.273567] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [511.273859] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [511.274590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [511.274746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [511.283374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [511.283570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [511.284086] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [511.284302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [511.288934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [511.320029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [511.320040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [511.320043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [511.320046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [511.320247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [511.320672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [511.321017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [511.321172] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [511.321195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [511.325623] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [511.395579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [511.396442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [511.402489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [511.404026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [511.404884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [511.405782] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [511.406465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [511.407202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [516.501182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [516.501813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [516.502605] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [516.503325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [516.504025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [516.504258] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [516.504489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [516.504709] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [516.504910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [516.505175] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [516.505331] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [516.505686] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [516.506586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [516.507257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [516.517707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [516.518052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [516.518617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [516.522040] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [516.523309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [516.568872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [516.568883] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [516.568887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [516.568890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [516.569099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [516.570233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [516.570572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [516.571436] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [516.571466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [516.576243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [516.627815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [516.628656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [516.634694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [516.636066] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [516.636424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [516.636810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [516.637002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [516.637198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [519.100490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [519.112705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [519.113226] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [519.113991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [519.115064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [519.116197] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [519.117328] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [519.118450] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [519.119052] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [519.119337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [519.119714] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [519.119935] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [519.120283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [519.121097] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [519.121282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [519.131148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [519.131274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [519.136107] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [519.166027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [519.166037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [519.166040] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [519.166043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [519.166248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [519.166390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [519.166939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [519.167154] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [519.167193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [519.171711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [519.176621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [519.181477] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [519.212378] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [519.212387] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [519.212390] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [519.212393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [519.213514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [519.213719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [519.214114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [519.214331] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [519.214367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [519.220809] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [519.225718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [519.225994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [519.229333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [519.230684] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [519.230989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [519.231294] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [519.231456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [519.231666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [521.737755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [521.738319] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [521.739140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [521.739905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [521.740754] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [521.741578] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [521.742246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [521.742465] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [521.742674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [521.742937] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [521.743099] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [521.743368] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [521.744077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [521.744235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [521.750405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [521.750547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [521.750726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [521.752934] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [521.755377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [521.786252] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [521.786263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [521.786266] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [521.786269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [521.786479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [521.787142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [521.787485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [521.787657] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [521.787679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [521.792055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [521.859722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [521.860275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [521.866335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [521.867680] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [521.868010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [521.868313] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [521.868480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [521.868761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [526.967804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [526.968369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [526.969195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [526.970045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [526.970903] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [526.971767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [526.972228] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [526.972446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [526.972662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [526.972934] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [526.973087] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [526.973350] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [526.974078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [526.974231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [526.984573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [526.984982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [526.985619] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [526.987956] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [526.990379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [527.035964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [527.035976] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [527.035979] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [527.035982] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [527.037173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [527.037339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [527.038394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [527.038573] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [527.038608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [527.043326] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [527.091995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [527.092522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [527.098463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [527.099824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [527.100161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [527.100469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [527.100649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [527.100850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [529.339873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [529.352777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [529.353301] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [529.354052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [529.354803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [529.355584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [529.356417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [529.357214] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [529.358002] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [529.358748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [529.359090] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [529.359254] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [529.359547] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [529.360275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [529.360434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [529.366605] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [529.366736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [529.371564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [529.403466] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [529.403477] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [529.403481] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [529.403484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [529.403692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [529.403854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [529.404191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [529.404352] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [529.404377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [529.409564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [529.414455] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [529.419298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [529.450268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [529.450277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [529.450280] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [529.450283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [529.450488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [529.451097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [529.451455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [529.451612] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [529.451635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [529.456061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

<7> [529.460933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [529.461108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [529.464554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [529.465907] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [529.466206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [529.466511] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [529.466686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [529.466889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [532.196672] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [532.198704] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [532.201203] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:399:HDMI-A-2] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [532.201416] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [532.201573] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [532.201768] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:398:DDI TC1/PHY C] [CRTC:150:pipe A]

<7> [532.201929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [532.202101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [532.202259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [532.202415] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [532.202570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [532.202735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [532.202889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [532.203044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [532.203197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [532.203350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [532.203507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [532.203679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [532.203836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [532.203991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [532.204146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [532.204301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [532.204454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [532.204615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [532.204769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [532.204929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [532.205087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [532.205242] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [532.205397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [532.205550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [532.205722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [532.205877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [532.206032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [532.206192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [532.206351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [532.206507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [532.206670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [532.206824] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [532.206978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [532.207131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [532.207284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [532.207438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [532.207595] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [532.207769] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [532.207954] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [532.208108] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [532.208262] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [532.208412] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [532.208562] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [532.208801] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [532.209001] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [532.209207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [532.209437] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 559716 num active planes 1

<7> [532.209627] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [532.209784] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [532.209955] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [532.210126] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [532.210283] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0

<7> [532.210445] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0

<7> [532.210614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [532.210774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [532.210930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [532.211086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [532.211240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [532.211394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [532.211547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [532.211712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [532.211866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [532.212018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [532.212172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [532.212326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [532.212479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [532.212752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [532.212906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [532.213065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [532.213225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [532.213382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [532.213538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [532.213725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [532.213879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [532.214033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [532.214187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [532.214339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [532.214493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [532.214654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [532.214807] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [532.214961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.215116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.215276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.215432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [532.215587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [532.215755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.215909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.216061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [532.216214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [532.216367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [532.216519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:415] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [532.216684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [532.216844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [532.217004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [532.217160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [532.217315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [532.217469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [532.217629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [532.229751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [532.229874] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [532.230041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [532.230235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [532.230493] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [532.230737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [532.230960] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [532.231181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [532.231386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [532.231652] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [532.231810] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [532.232371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [532.233109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [532.233273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [532.239436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [532.239848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [532.240064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [532.240816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [532.242219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [532.242390] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI B/PHY B]

<7> [532.242548] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:398:DDI TC1/PHY C]

<7> [532.242712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:402:DDI TC2/PHY D]

<7> [532.242867] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST A]

<7> [532.243022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST B]

<7> [532.243174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DP-MST C]

<7> [532.243375] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [532.243631] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [532.243796] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [532.244013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [532.244209] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [532.245044] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [532.245214] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [532.264529] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [532.265016] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [532.266443] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [532.266484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]

<7> [532.271013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]

<7> [532.296863] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [532.296872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [532.296875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD monitor fitHeadless4k

<7> [532.296878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:399:HDMI-A-2] ELD size 36, SAD count 0

<7> [532.297082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [532.297231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [532.297562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [532.297742] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<6> [532.302091] Console: switching to colour frame buffer device 240x67

<7> [532.302011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]

<7> [532.306290] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress