igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	12.67 seconds
Igt-Version	IGT-Version: 2.3-gc7d12b349 (x86_64) (Linux: 7.0.0-rc2-CI_DRM_18108-g6884fe03ff2b+ x86_64)
Out	Using IGT_SRANDOM=1773008659 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888108545820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88823c409820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0xa30 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x740 worker_thread+0x1e8/0x3d0 kthread+0x10d/0x150 ret_from_fork+0x3d4/0x480 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88823c409820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x9b0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881194cd820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x548/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.670s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.670s)
Dmesg	<6> [274.006240] Console: switching to colour dummy device 80x25 <6> [274.007409] [IGT] i915_pm_rpm: executing <7> [274.010542] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [274.011500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [274.011515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [274.012303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [274.012684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [274.013049] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [274.013490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [274.013503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [274.013511] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [274.013565] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [274.013936] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [274.014501] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [274.016057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [274.016070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [274.016081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [274.016247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [274.016258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [274.020761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [274.020886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [274.020897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [274.021855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.022282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [274.022833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.023266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.023278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.023643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [274.026917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.026929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [274.027384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [274.027514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [274.027524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [274.031998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [274.032123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [274.032133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [274.032814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.033214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [274.033750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.034157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.034167] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.034558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [274.037795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.037807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [274.038241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [274.048030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [274.048045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [274.052708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [274.053577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [274.053585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [274.054097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.054369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [274.054853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.055117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.055125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.055443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [274.058551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.058563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [274.058904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [274.059590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [274.059599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [274.063952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [274.064633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [274.064642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [274.065161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.065444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [274.065921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.066222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.066233] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.066574] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [274.069648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.069657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [274.069940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [274.070514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [274.070522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [274.070809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [274.071038] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [274.071288] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [274.071615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [274.071623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [274.071629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [274.071657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [274.071901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [274.072173] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [274.072951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [274.072959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [274.072966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [274.072992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [274.072999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [274.077380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [274.077423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [274.077434] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [274.078069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.078422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [274.078958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [274.079379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.079390] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.079726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [274.082889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [274.082901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [274.083304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [274.083345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [274.083354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [274.087828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [274.087867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [274.087877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [274.088539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.088881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [274.089430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [274.089789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.089799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [274.090093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [274.093281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [274.093293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [274.093689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [274.094411] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144] <7> [274.208000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [275.146160] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [275.146899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [275.148328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [275.148637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [275.148946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [275.149273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [275.149624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [275.149933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [275.150293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [275.150640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [275.150948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [275.151292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [275.151638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [275.151933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [275.152245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [275.152576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [275.152873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [275.153169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [275.153493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [275.153834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [275.154162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [275.154489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [275.154813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [275.155175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [275.155495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [275.155804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [275.156144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [275.156443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [275.156751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [275.157103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [275.157507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [275.157889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [275.158293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [275.158680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [275.159073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [275.159484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [275.159871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [275.160158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [275.160455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [275.160764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [275.161039] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [275.161329] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [275.161679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [275.162031] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [275.162428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [275.162795] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [275.163165] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [275.163560] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [275.163940] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [275.164398] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [275.164725] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [275.165114] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [275.165524] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [275.165900] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [275.166314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [275.166705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [275.167086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [275.167443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [275.167971] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [275.169536] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [275.377457] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [275.379487] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [275.396707] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [275.397287] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [275.397692] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [275.398256] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [275.398681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [275.450998] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [275.451170] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [275.452577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [275.453367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [275.453859] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [275.459382] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [275.459705] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [275.460343] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [275.461752] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [275.463342] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [275.466509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [275.468072] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [275.469416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [275.470824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [275.472247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [275.473650] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [275.475065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [275.476448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [275.477838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [275.479232] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [275.481891] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [275.485624] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [275.486991] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [275.585857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [275.587772] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [275.588943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [275.590977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [275.596986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [275.614362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [275.703524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [275.704835] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [275.705926] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [275.707529] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [275.709785] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [275.711209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [275.713118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [275.714563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [275.716224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [275.717669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [275.719119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [275.720500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [275.721961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [275.723417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [275.724846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [275.726270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [275.727681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [275.729109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [275.730529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [275.731955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [275.733379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [275.734799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [275.736205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [275.737627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [275.739037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [275.740526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [275.741944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [275.743369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [275.744807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [275.746226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [275.747658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [275.749105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [275.750526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [275.751954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [275.753399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [275.754828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [275.756291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [275.757727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [275.759198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [275.760623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [275.762069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [275.763491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [275.764907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [275.766334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [275.767776] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [275.769414] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [275.770835] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [275.772217] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [275.773616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [275.774964] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [275.776362] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [275.777765] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [275.779491] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [275.781058] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [275.782488] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [275.783893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [275.785324] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [275.786741] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [275.788214] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [275.789657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [275.791082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [275.792496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [275.793851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [275.795270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [275.796683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [275.798088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [275.799503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [275.800911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [275.802335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [275.803740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [275.805177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [275.806583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [275.808000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [275.808967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [275.809901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [275.810832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [275.811748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [275.812683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [275.813625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [275.814564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [275.815506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [275.816441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [275.817319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [275.817997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [275.818708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [275.819408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [275.820090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [275.820804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [275.821517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [275.822224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [275.822904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [275.823611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [275.824321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [275.825001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [275.825705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [275.826350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [275.826892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [275.827459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [275.828002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [275.828564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [275.829104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [275.829669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [275.830233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [275.830775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [275.831349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [275.831893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [275.832459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [275.833004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [275.845194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [275.852780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [275.853178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [275.853826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [275.854633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [275.855409] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [275.856386] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [275.856758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [275.857153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [275.857516] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [275.857878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [275.858268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [275.858631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [275.858991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [275.859367] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [275.859984] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [275.860392] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [275.861039] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [275.861508] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining) <7> [275.961551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [275.981387] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [275.982194] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [275.983144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [276.031973] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [276.033178] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [276.034294] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [276.035491] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [276.183777] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [276.185397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [276.187402] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [276.190548] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [276.192354] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [276.199464] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [276.200781] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [276.203549] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [276.204693] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [276.205784] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [276.214574] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [276.216157] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [276.220152] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [276.226287] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [276.228513] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [276.230055] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [276.234717] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [276.236200] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [276.238874] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [276.244924] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [276.246409] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [276.250199] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [276.259663] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [276.269857] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [276.272233] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [276.278605] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [276.279755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [276.285703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [276.287549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <6> [276.289985] [IGT] i915_pm_rpm: starting subtest module-reload <7> [276.289331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.291305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.293230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.293279] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.295139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.301692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.301741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.303476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [276.309228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [276.310615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.311624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.312803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.313835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.313863] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.314603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.318769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.318796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.401625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [276.402448] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [276.415231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [276.440756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [276.441187] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [276.454212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [276.527859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [276.529176] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [276.541036] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [276.541499] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [276.541883] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [276.542335] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [276.542916] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [276.544411] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [276.545016] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [276.545612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [276.546202] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [276.548099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [276.635226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [276.636814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [276.637673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [276.638823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [276.645256] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [276.645682] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [276.647366] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [276.648930] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.651240] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.652818] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [276.655465] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [276.676772] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [276.679189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [276.684225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [276.686189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [276.687692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [276.689330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [276.690770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [276.692591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [276.693971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [276.695548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [276.697175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [276.698819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [276.700357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [276.701933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [276.703521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [276.704739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [276.706275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [276.707830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [276.709387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [276.710943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [276.712515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [276.713738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [276.715222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [276.716663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [276.718089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [276.719549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [276.721062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [276.722534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [276.723793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [276.724986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [276.726328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [276.727678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [276.729070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [276.730443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [276.731798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [276.732781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [276.733532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [276.734209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [276.734953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [276.735645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [276.736426] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [276.737083] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [276.737900] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [276.738815] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [276.739637] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [276.740330] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [276.741085] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [276.741696] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [276.742203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [276.742746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [276.743238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [276.743802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [276.745178] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [276.953284] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [276.955580] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [276.961768] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [276.962233] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [276.963130] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [276.964003] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [276.964418] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [277.015776] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [277.015824] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [277.017000] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [277.017721] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [277.018115] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [277.018441] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [277.019565] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [277.020646] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [277.022650] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [277.026512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [277.028534] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [277.030271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [277.031602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [277.033063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [277.034321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [277.035662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [277.036918] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [277.038372] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [277.039638] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [277.042249] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [277.111936] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [277.157540] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [277.183579] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [277.195368] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [277.208878] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [277.216647] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [277.247001] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (271 ms remaining) <7> [277.521240] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [277.592064] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [278.063700] [IGT] Reloading i915 w/o display <5> [278.977200] Setting dangerous option force_probe - tainting kernel <6> [278.989987] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [278.991556] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [278.992025] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [278.992321] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [278.992608] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [278.992975] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [278.993592] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [278.993969] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [278.995240] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [278.995503] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [278.995781] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [278.996059] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [278.996069] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [278.996748] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [278.996805] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [278.997104] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [278.997476] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e23d1fff], io: n/a <7> [278.997823] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [278.998756] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [278.999223] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [278.999507] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [278.999808] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [279.000144] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [279.009873] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [279.010184] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [279.010467] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [279.010772] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [279.011133] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [279.011424] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [279.011740] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [279.012079] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [279.012365] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [279.012649] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [279.012955] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [279.013294] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [279.013628] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [279.014003] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [279.014336] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [279.014637] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [279.015646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [279.016002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [279.016307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [279.016649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [279.016997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [279.017325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [279.017628] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [279.017968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [279.018279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [279.018582] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [279.018906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [279.019260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [279.019606] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [279.019924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [279.020266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [279.020570] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [279.020888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [279.021228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [279.021517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [279.021845] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [279.022177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [279.022485] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [279.022792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [279.023116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [279.023504] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [279.023965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [279.024462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [279.024948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [279.025261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [279.025549] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [279.025891] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [279.026281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [279.026793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [279.027188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [279.027562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [279.027877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.028291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [279.028706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [279.029102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [279.029497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [279.030481] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [279.031657] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [279.032462] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [279.033731] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [279.034149] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [279.034541] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [279.034905] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [279.035605] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [279.035801] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [279.036189] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [279.036568] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [279.036962] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [279.037342] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [279.037627] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [279.037935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [279.038285] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [279.038661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [279.039053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [279.039431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [279.039829] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [279.040136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [279.040410] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [279.040714] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [279.041095] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [279.041473] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [279.046471] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [279.056528] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [279.057030] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [279.057470] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [279.062701] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [279.063028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [279.063327] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [279.063610] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [279.063949] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [279.064347] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [279.064780] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [279.065182] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [279.065588] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [279.066022] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [279.066564] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [279.067530] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [279.067958] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [279.068358] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [279.068770] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [279.069167] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [279.069610] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [279.070277] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [279.070720] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [279.071168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [279.080862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [279.081983] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [279.083067] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [279.289631] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [279.290130] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [279.291759] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [279.293979] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [279.303197] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.303212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [279.303221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [279.303346] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [279.303786] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [279.304316] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [279.305020] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [279.305588] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [279.306937] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [279.307375] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [279.307834] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [279.308264] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [279.308713] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [279.309199] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [279.310686] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [279.311226] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [279.313437] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [279.314392] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [279.314882] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [279.315969] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [279.316454] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [279.317890] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [279.318377] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [279.318851] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [279.319945] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [279.320378] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [279.320909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [279.321558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [279.322250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [279.322732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [279.323187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [279.323606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [279.324080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [279.324522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [279.325041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [279.325529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [279.326020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [279.326517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [279.327056] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [279.327545] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [279.328004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [279.328422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [279.328863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [279.329329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [279.329770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [279.330210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [279.330665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [279.331158] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [279.331670] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [279.332168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [279.332671] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [279.333595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [279.334128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [279.334657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [279.335185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [279.335739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [279.336180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [279.336619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [279.337086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [279.337524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [279.337963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [279.338401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [279.338849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [279.339288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [279.339769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [279.340211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [279.340662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [279.341077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [279.341519] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [279.341980] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [279.342393] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [279.343165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [279.343615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [279.344072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [279.344515] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [279.345053] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [279.345417] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [279.345817] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [279.346257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [279.350122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [279.350607] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [279.351091] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [279.384222] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [279.384546] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [279.384861] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [279.385224] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [279.385597] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [279.386054] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [279.386494] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [279.386950] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [279.387389] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [279.388509] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [279.388983] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [279.389412] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [279.389856] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [279.402331] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [279.402755] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [279.403141] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [279.403528] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [279.403930] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [279.404314] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [279.405074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [279.405476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [279.405897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [279.418535] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [279.431530] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [279.432779] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [279.433892] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [279.442959] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [279.450201] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [279.450820] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [279.451926] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [279.465772] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [279.465950] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [279.470861] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [279.478420] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [279.478590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [279.481556] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [279.481847] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [279.495897] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [279.499010] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [279.499190] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [279.507512] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [279.511649] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [279.519676] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [279.566840] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [279.578052] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input35 <7> [279.582046] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [279.587126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [279.587610] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [279.588075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [279.588474] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [279.588909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [279.589310] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [279.589775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [279.590179] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [279.590606] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [279.592154] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [279.592604] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [279.593044] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [279.593456] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [279.595105] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [279.596150] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [279.596311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [279.596324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [279.596758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected <7> [279.596778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [279.596788] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2 <7> [279.596818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [279.596829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [279.597236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [279.597248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [279.597258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [279.597695] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [279.597854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [279.597866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [279.597877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [279.598282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [279.598293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [279.598303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [279.598720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [279.598730] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [279.598738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [279.598746] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [279.598753] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [279.598761] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [279.598768] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [279.598827] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [279.598847] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [279.598963] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [279.598979] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [279.602656] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [279.603140] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [279.603574] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [279.604034] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [279.604173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [279.604187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [279.604602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected <7> [279.604640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [279.604651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [279.605054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [279.605066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [279.605077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [279.605481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [279.605493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [279.605503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [279.605930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [279.605942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [279.605952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [279.606355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [279.606366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [279.606374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no <7> [279.606381] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [279.606389] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [279.606397] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [279.606404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [279.606458] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [279.606477] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [279.606578] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [279.606607] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [279.606793] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [279.606820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [279.607247] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [279.607794] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [279.608225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [279.608675] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [279.609106] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [279.609451] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [279.609884] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [279.610261] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [279.610575] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [279.611007] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [279.611427] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [279.611878] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [279.612294] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [279.612736] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [279.613155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [279.613546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [279.613904] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [279.614310] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [279.615883] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [279.616268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [279.616597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [279.617049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [279.617481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [279.617923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.618766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [279.619110] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [279.619446] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [279.619806] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [279.620144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [279.620481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [279.620843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [279.621183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [279.621519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [279.621884] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [279.622136] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [279.622452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [279.622799] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [279.623125] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [279.623450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [279.623793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [279.624133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [279.624465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [279.624811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [279.625078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [279.625318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [279.625634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [279.625949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [279.626264] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [279.626582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [279.626914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [279.627239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [279.627560] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [279.627873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [279.628116] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [279.628382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [279.628718] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [279.629035] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [279.629348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [279.629679] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [279.630006] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [279.630319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [279.630553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [279.630884] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [279.631224] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [279.631562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [279.631909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [279.632251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [279.632591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [279.632941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [279.633281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [279.633636] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [279.633973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [279.634313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [279.634662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [279.634999] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [279.635338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [279.635700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [279.636041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [279.636381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [279.636726] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [279.637048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [279.637366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [279.637703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [279.638022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [279.638356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [279.638700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [279.639021] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [279.639025] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [279.639029] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [279.656236] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [279.657480] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [279.658763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.659933] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.661946] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [279.697344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.697787] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.698172] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.698553] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.698983] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.699371] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.700199] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.700630] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.701013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [279.723658] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [279.750499] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [279.756322] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [280.857854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.818392] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off <7> [281.819316] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [281.820255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [281.821397] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [281.821814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.822035] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [281.822107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.822450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [281.823421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.823539] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [281.824367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.829352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.876505] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [281.901514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.909468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.909837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.910134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.911273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.911869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.912801] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [281.913183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [281.913493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [281.913859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [281.914220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [281.925500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.925841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [281.926125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.926446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.927239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.037694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.038001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [282.038687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.039319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.039905] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.047644] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.047931] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.048167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.048607] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.048870] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.049169] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.049443] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.049692] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.049971] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.050933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.051945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [282.052899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [282.053170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [282.053875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [282.118248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [282.118650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [282.119384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [282.120146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.120873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [282.121439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [282.121936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [282.122457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [282.122994] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [282.155609] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [282.178335] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [282.189688] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [282.193223] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [282.208716] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [282.215052] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [282.243686] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (77 ms remaining) <7> [282.328551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [282.338412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [282.822049] [IGT] Reloading i915 as normal <5> [283.739051] Setting dangerous option force_probe - tainting kernel <6> [283.751915] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [283.753515] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [283.753951] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [283.754274] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [283.754581] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [283.754921] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [283.755391] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [283.755655] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [283.756756] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [283.757034] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [283.757338] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [283.757676] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [283.757691] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [283.758647] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [283.758705] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [283.759105] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [283.759443] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e23d1fff], io: n/a <7> [283.759681] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [283.760517] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [283.761008] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [283.761425] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [283.761801] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [283.762083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [283.772263] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [283.772585] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [283.772866] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [283.773180] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [283.773594] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [283.774002] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [283.774421] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [283.774834] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [283.775158] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [283.775489] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [283.775861] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [283.776277] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [283.776682] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [283.777100] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [283.777502] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [283.777808] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [283.778707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [283.779042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [283.779368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [283.779718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [283.780105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [283.780519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [283.780934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850) <7> [283.781365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [283.781764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [283.782059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [283.782384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [283.782708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [283.782991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [283.783345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [283.783660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [283.783952] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [283.784261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [283.784625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [283.784934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [283.785266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [283.785590] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [283.785872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [283.786175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [283.786491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [283.786886] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [283.787335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [283.787735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [283.788040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [283.788428] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [283.788819] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [283.789220] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [283.789607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [283.790084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.790405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [283.790693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [283.791112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [283.791590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [283.791987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [283.792403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [283.792742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [283.793859] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [283.795058] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [283.796375] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [283.796798] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [283.797210] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [283.797568] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [283.798268] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [283.798755] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [283.799269] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [283.799660] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [283.799985] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [283.800310] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [283.800616] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [283.800890] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [283.801184] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [283.801503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [283.801778] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [283.802052] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [283.802342] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [283.802661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [283.802935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [283.803252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [283.803537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [283.803811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [283.804100] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [283.809511] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [283.813421] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [283.813891] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT) <7> [283.814348] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A] <7> [283.823142] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [283.823480] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [283.823774] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [283.824063] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [283.824536] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [283.824945] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [283.825370] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [283.825765] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [283.826357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [283.826675] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [283.827206] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0 <7> [283.827651] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [283.828039] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [283.828471] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [283.828858] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [283.829895] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [283.830384] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [283.831065] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [283.831945] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [283.832430] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [283.842265] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [283.842595] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [283.842866] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [284.049850] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [284.051809] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [284.053355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [284.056936] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [284.072787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.072829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.072856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.073484] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.074720] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.076091] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static <7> [284.077689] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control <7> [284.079281] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [284.081215] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [284.082609] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [284.083820] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [284.085211] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [284.086406] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [284.087837] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [284.090635] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT) <7> [284.092181] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B] <7> [284.096039] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [284.097463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B] <7> [284.098706] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [284.101615] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT) <7> [284.103017] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C] <7> [284.106293] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [284.107648] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C] <7> [284.108884] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [284.112477] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [284.113809] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [284.114788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled <7> [284.116787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled <7> [284.118855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled <7> [284.120365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [284.122167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7> [284.123744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A <7> [284.125244] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B <7> [284.126716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B <7> [284.128211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B <7> [284.129673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C <7> [284.131171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C <7> [284.132711] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C <7> [284.134421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A <7> [284.135836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A <7> [284.137111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A <7> [284.138478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B <7> [284.139774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C <7> [284.141340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A <7> [284.142678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A <7> [284.144119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B <7> [284.145701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C <7> [284.147280] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [284.148765] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [284.150255] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [284.151766] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [284.153504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled <7> [284.154713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled <7> [284.155754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled <7> [284.156797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled <7> [284.157793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled <7> [284.158611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [284.159499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7> [284.160331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz <7> [284.161179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz <7> [284.161948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz <7> [284.162828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz <7> [284.163606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz <7> [284.164261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz <7> [284.164858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz <7> [284.165457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz <7> [284.166066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz <7> [284.166635] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz <7> [284.167224] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.167812] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.168456] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [284.169498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state] <7> [284.170119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state] <7> [284.170724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state] <7> [284.171321] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [284.172010] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [284.172454] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [284.172854] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [284.173382] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [284.176765] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [284.177252] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [284.177799] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [284.204642] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [284.205055] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [284.205403] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [284.205751] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [284.206169] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8 <7> [284.206589] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108 <7> [284.207004] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208 <7> [284.207538] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308 <7> [284.207953] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8 <7> [284.208378] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8 <7> [284.208791] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108 <7> [284.209214] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208 <7> [284.209627] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308 <7> [284.210050] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8 <7> [284.210465] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8 <7> [284.210880] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108 <7> [284.211304] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208 <7> [284.211721] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308 <7> [284.212176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8 <7> [284.212963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset] <7> [284.213399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset] <7> [284.213817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset] <7> [284.214539] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [284.215486] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B] <7> [284.216199] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C] <7> [284.218228] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [284.225485] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs <7> [284.229242] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered <7> [284.229760] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [284.230883] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [284.233802] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event <7> [284.233942] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs <7> [284.236116] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [284.239886] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event <7> [284.240023] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs <7> [284.240984] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event <7> [284.241146] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs <7> [284.242789] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [284.244840] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event <7> [284.244961] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs <7> [284.248566] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event <6> [284.248661] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [284.254372] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [284.295543] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [284.308158] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input39 <7> [284.309575] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [284.315004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.316422] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping <7> [284.316863] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping <7> [284.317307] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping <7> [284.317725] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [284.318466] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [284.319505] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.319799] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.320268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.321313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.321741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.322377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.322832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.322845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.323256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.327235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.327252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.327768] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.328745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.333365] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.333846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.334588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.334994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.335591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.338254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.338268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.338685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.342210] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.342225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.342684] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [284.344405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [284.344419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [284.344974] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.345498] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [284.347126] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.347500] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.347946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.347960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.347970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.348014] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [284.349124] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.349546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.350680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected <7> [284.350962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [284.350973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.350985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.350997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.351008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.351482] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [284.355874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.355894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.355905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.356983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.357445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.358073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.358549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.358562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.358965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.365087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.365104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.365590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.365606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.365617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.371717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.371736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.371747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.372500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.372903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.373450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.373767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.373776] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.374355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.377930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.377942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.378498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.378512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [284.378522] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [284.378530] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [284.378537] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [284.378544] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [284.378605] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.378640] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [284.378649] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [284.378681] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [284.378819] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [284.378877] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [284.386229] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb <6> [284.388281] fbcon: i915drmfb (fb0) is primary device <6> [284.390122] Console: switching to colour frame buffer device 200x56 <6> [284.390141] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [284.390155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [284.390637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [284.391260] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [284.391281] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.392044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [284.392067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [284.392766] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.393222] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.393627] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.394301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.394316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.394335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.394410] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [284.394822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.395969] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.397315] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [284.397769] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [284.398862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [284.398886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.398898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.398911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.398922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.400196] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [284.400643] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [284.401277] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [284.401716] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [284.402350] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [284.402794] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [284.403404] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [284.403842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [284.404525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.404544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.404555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.405589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.406075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.406670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.407157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.407170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.407563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.411716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.411733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.412458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.412474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.412486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.413618] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [284.414249] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [284.414678] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [284.415281] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [284.415709] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [284.416345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [284.416779] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [284.417540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.417562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.417574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.418306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.418708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.419307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.419750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.419762] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.420398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.423982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.423994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.424046] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [284.424510] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [284.424716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.424729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [284.424738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [284.424745] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [284.424751] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [284.424757] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [284.424916] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [284.425841] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.425891] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [284.425901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [284.425975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [284.426612] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [284.427086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [284.427520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [284.427874] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [284.427958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [284.428400] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [284.428793] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [284.428793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [284.429255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.429764] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [284.429891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [284.430253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [284.430387] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [284.430598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [284.430836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [284.430946] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [284.431310] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [284.431497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [284.431653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [284.432000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [284.431955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [284.432591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [284.433224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [284.433655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [284.434259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [284.434702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [284.434904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [284.435418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [284.435523] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [284.435889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [284.435872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [284.436405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [284.436587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [284.436760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [284.437143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [284.437232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [284.437507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [284.437688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [284.437855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [284.438379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [284.438807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [284.439428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [284.439852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [284.440447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [284.440775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [284.440864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [284.441211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [284.441460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [284.441543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [284.441877] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [284.441900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [284.442242] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [284.442573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [284.442537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [284.442908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [284.442976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [284.443262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [284.443592] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [284.443584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [284.443926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [284.444180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [284.444309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [284.444645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [284.444618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [284.444978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [284.445315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [284.445495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [284.445738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [284.445856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [284.446296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [284.446357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [284.446643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [284.446803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [284.446978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [284.447404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [284.447498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [284.447755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [284.447940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [284.448536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [284.448946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [284.449535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [284.449957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state <7> [284.450541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [284.450811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [284.450958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [284.451385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [284.451510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [284.451742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [284.451945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [284.452108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [284.452441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [284.452633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [284.452771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [284.453121] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [284.453256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [284.453452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [284.453698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [284.453788] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [284.454140] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [284.454322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [284.454472] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [284.454807] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [284.454764] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [284.455228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [284.455453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [284.455556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [284.455891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [284.455899] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [284.456254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [284.456500] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [284.456587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [284.456922] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [284.456936] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [284.457380] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [284.457572] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [284.457711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [284.458060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [284.458165] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [284.458393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [284.458601] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [284.458728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [284.459074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [284.459337] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [284.459403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [284.459737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [284.459821] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [284.460088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [284.460420] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [284.460424] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [284.460428] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [284.460478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [284.460879] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [284.461480] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [284.461863] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [284.462418] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [284.462793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [284.463331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [284.463632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [284.463932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [284.464509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [284.464874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [284.465419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [284.465782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [284.466303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [284.466640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [284.466944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [284.467479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [284.467840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [284.468369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [284.468682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [284.469002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [284.469498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [284.469848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [284.470337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [284.470696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [284.471241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [284.471596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [284.471955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [284.472486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [284.472849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [284.473390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.473734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.474249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [284.474609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.474969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [284.475547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [284.475910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <6> [284.476526] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [284.476430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [284.476787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [284.477300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [284.477625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [284.477930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [284.478381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [284.478667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [284.478924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [284.479462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [284.479829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [284.480285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [284.480652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [284.481188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [284.481552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [284.481915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [284.482449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [284.482808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [284.484465] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [284.490978] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [284.491371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [284.491728] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [284.492126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [284.492489] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [284.492846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [284.493210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [284.493567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [284.493922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [284.496463] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [284.496768] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [284.497814] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [284.498249] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [284.498548] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [284.509064] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.509468] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [284.509866] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [284.712163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.714209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.717386] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [284.723469] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [284.724832] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [284.728506] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [284.730080] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [284.731524] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [284.737212] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [284.739155] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [284.740947] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [284.745889] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [284.747322] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [284.748597] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [284.753637] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [284.755383] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [284.758681] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [284.762063] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [284.763883] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [284.766418] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [284.772161] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 453 us, max time under evasion is 250 us <7> [284.778958] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [284.788373] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [284.790652] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [284.793734] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7> [284.802957] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [284.802556] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [284.803341] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [284.803386] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [284.803877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [284.803928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [284.805845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.810899] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [284.819581] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.819937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.821852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.824833] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.826894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.826955] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.827146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.827328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [284.829028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.833832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.839807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [284.839843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.839877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.839912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.839941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.846794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.846841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.846874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.848547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.849356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.851387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.852592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.852619] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.853674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.858215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.858238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.858879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.858903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.858921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.863999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.864026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.864043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.864928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.865569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.868808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.869269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.869293] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.869680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.873772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.873786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.874403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.874418] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes <7> [284.874428] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no <7> [284.874437] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no <7> [284.874446] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no <7> [284.874454] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no <7> [284.874515] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [284.874549] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800 <7> [284.874558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [284.875409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0) <7> [284.875633] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [284.875672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [284.875684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [284.876347] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.876741] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.877108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.877499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.877512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.877521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.877564] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [284.877947] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.878352] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.880150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [284.880164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.880176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.880334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.880345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.884861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.885034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.885002] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.885046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.885463] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.885834] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.886009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.886251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.886403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.886635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.886986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.887045] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.887435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.887421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.887446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.887803] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.887814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.888263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.891096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.891110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.891531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.891671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.891681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.896182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.896316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.896328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.897148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.897496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.897941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.898246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.898255] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.898496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.901618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.901633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.902065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.909606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.909629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.914190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.915140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.915153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.915837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.916247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.916776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.917649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.917662] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <6> [284.917972] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [284.918052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.921506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.921521] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <6> [284.921856] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [284.921940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.923195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.923208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.927706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.928439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.928449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.929107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.929387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.929818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.930125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.930136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.930436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.933705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.933717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <6> [284.935084] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [284.936084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.937753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] <7> [284.937776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1] <7> [284.938267] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [284.938567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [284.938819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [284.939160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.939172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor <7> [284.939181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0 <7> [284.939223] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no <7> [284.939487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [284.939738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [284.940799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes: <7> [284.940811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [284.940821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [284.940864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] <7> [284.940874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [284.950110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected <7> [284.950184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] <7> [284.950194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [284.950855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.951318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [284.951871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [284.952294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.952305] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.952663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [284.956444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [284.956457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [284.956881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected <7> [284.956997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] <7> [284.957008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [284.961581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected <7> [284.961642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] <7> [284.961652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [284.962213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.962489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [284.962923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [284.963403] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.963415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [284.963765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [284.967386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [284.967399] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [284.967822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected <7> [284.971797] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [286.022246] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A] <7> [286.022710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [286.023815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [286.024866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [286.025142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [286.025417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [286.025692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [286.026001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [286.026323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [286.026598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [286.026891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [286.027199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [286.027473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [286.027745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [286.028051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [286.028368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [286.028642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [286.028937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [286.029244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [286.029518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [286.029791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [286.030082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [286.030390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [286.030662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [286.030951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [286.031272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [286.031612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [286.031924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [286.032232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [286.032552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [286.032847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [286.033211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [286.033588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [286.033979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [286.034349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [286.034720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [286.035119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [286.035493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [286.035859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [286.036138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [286.036405] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [286.036670] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [286.037001] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [286.037317] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [286.037567] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [286.037846] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [286.038155] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.038413] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.038667] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [286.039041] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [286.039366] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [286.039662] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [286.039965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [286.040274] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [286.040540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [286.040848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [286.041179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [286.041443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [286.041956] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [286.043694] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [286.233501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.249008] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [286.250508] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [286.265199] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [286.265752] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [286.266175] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [286.266760] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [286.267138] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [286.318951] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [286.319768] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.320008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [286.321020] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [286.321364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [286.325030] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [286.325154] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [286.326605] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [286.327026] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [286.328528] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.331210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [286.332476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [286.333483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [286.334612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [286.335631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [286.336826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [286.337738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [286.338702] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [286.340020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [286.341123] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [286.343245] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [286.345921] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B] <7> [286.346702] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C] <7> [286.448467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [286.450350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [286.451690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [286.453281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [286.455817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [286.474938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [286.564696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [286.566437] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [286.567424] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000 <7> [286.568699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [286.570522] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A] <7> [286.571758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [286.573013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [286.574078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [286.575225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [286.576350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [286.577741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [286.579322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [286.580710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [286.582101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [286.583229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [286.584602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [286.585974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [286.587345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [286.588697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [286.590085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [286.591482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [286.592756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [286.593823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [286.594973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [286.596008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [286.597206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [286.598209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [286.599336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [286.600369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [286.601520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [286.602746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [286.603990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [286.605000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [286.606146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [286.607189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [286.608344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [286.609330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [286.610495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [286.611608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [286.612836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [286.614176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [286.615553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [286.616942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [286.618318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [286.619718] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [286.621148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [286.622152] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [286.623269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [286.624264] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [286.625395] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [286.626351] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [286.627491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [286.628883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [286.630137] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [286.631178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [286.632233] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [286.633212] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [286.634290] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0 <7> [286.635299] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0 <7> [286.636360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset] <7> [286.637337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [286.638421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [286.639644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [286.640697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [286.641879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [286.643244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [286.644603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [286.645956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [286.647337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [286.648571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [286.649592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [286.650962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [286.652329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [286.653691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [286.655067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [286.656269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [286.657344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [286.658698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [286.660068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [286.661428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [286.662833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [286.663698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [286.664411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [286.665323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [286.666238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.667146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.668063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [286.668982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.669649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [286.670337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [286.671257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [286.672158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [286.672881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [286.673533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [286.674195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [286.674692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [286.675292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [286.675970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [286.676621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.677295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.677973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.678478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [286.678979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [286.679633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [286.680353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [286.681029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [286.681620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [286.682180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [286.693871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [286.703530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [286.703981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.704268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.705594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [286.706402] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [286.707610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [286.707934] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [286.708215] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [286.708471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [286.708707] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [286.708974] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [286.709260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [286.709494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [286.709729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [286.710204] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A] <7> [286.710469] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [286.710958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on <7> [286.711306] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (110 ms remaining) <7> [286.824160] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [286.913314] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.914616] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on <7> [286.915840] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [286.964694] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [286.965941] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [286.967056] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [286.968328] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [287.116695] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.118086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [287.119447] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.122513] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on <7> [287.124160] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [287.129761] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [287.130847] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [287.133852] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [287.135127] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.136393] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [287.140342] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK <7> [287.141961] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [287.144075] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [287.149539] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [287.151004] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [287.152525] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [287.156815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [287.158378] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [287.161190] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [287.164554] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [287.166104] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [287.168315] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37 <7> [287.173149] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 338 us, max time under evasion is 250 us <7> [287.180345] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [287.186981] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [287.188686] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [287.194131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1] <7> [287.195572] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [287.201899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1] <7> [287.203505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.205473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.207528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.209471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.209512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.211376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.217805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.217850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.222139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2] <7> [287.227916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2] <7> [287.230186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.231521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.233870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.235294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.235335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.237194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.243426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.243470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.339264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.340095] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.352882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.378284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.378731] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.391520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.452516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.454820] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.463528] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.463987] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.464372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.464797] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.465227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.465612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.466049] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.466458] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.466927] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.468119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.551255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.552521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [287.553154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [287.553839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [287.558702] Console: switching to colour dummy device 80x25 <7> [287.559082] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed <7> [287.559307] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [287.560739] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [287.561520] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.562257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.562968] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [287.564191] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [287.580596] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [287.581852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [287.583125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [287.584765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [287.585549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [287.586292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [287.586971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [287.587585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [287.588982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.589839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [287.590668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.591472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.592438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.593432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.594188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.594909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.595484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.596097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.596798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [287.597389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.598038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [287.598822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [287.599480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [287.600124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [287.600946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [287.601790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [287.602591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [287.603443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [287.604285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [287.605070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [287.605785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [287.606578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [287.607423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [287.608250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [287.609090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [287.609933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [287.610766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [287.611481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [287.612133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [287.612970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [287.613798] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset <7> [287.614607] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0 <7> [287.615564] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [287.616485] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [287.617238] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [287.618080] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.618902] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [287.619730] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [287.620537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset] <7> [287.621382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [287.622161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [287.622795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no <7> [287.624600] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [287.832114] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0 <7> [287.834342] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [287.851486] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off <7> [287.851876] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [287.852977] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time <7> [287.853457] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short <7> [287.854581] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [287.905961] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.907329] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long <7> [287.907711] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.908928] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.912308] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [287.913034] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A] <7> [287.914102] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A] <7> [287.915426] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [287.917246] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [287.920991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A] <7> [287.923076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B] <7> [287.924901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A] <7> [287.926720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B] <7> [287.928475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C] <7> [287.930097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C] <7> [287.931461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A] <7> [287.932857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B] <7> [287.934236] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C] <7> [287.935602] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1] <7> [287.938241] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A] <7> [288.016800] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [288.062571] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs <7> [288.090427] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs <7> [288.100362] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs <7> [288.121641] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs <7> [288.126962] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs <7> [288.154744] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (255 ms remaining) <7> [288.416134] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [288.426793] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [288.962517] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [288.963602] [IGT] i915_pm_rpm: exiting, ret=0

<6> [274.006240] Console: switching to colour dummy device 80x25

<7> [274.010542] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [274.011500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [274.011515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [274.012303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [274.012684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [274.013049] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [274.013490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [274.013503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [274.013511] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [274.013565] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [274.013936] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [274.014501] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [274.016057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [274.016070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [274.016081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [274.016247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [274.016258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [274.020761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [274.020886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [274.020897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [274.021855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.022282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [274.022833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.023266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.023278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.023643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [274.026917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.026929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [274.027384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [274.027514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [274.027524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [274.031998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [274.032123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [274.032133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [274.032814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.033214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [274.033750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.034157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.034167] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.034558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [274.037795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.037807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [274.038241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [274.048030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [274.048045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [274.052708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [274.053577] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [274.053585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [274.054097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.054369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [274.054853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.055117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.055125] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.055443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [274.058551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.058563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [274.058904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [274.059590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [274.059599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [274.063952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [274.064633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [274.064642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [274.065161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.065444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [274.065921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.066222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.066233] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.066574] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [274.069648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.069657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [274.069940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [274.070514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [274.070522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [274.070809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [274.071038] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [274.071288] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [274.071615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [274.071623] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [274.071629] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [274.071657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [274.071901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [274.072173] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [274.072951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [274.072959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [274.072966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [274.072992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [274.072999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [274.077380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [274.077423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [274.077434] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [274.078069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.078422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [274.078958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [274.079379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.079390] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.079726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [274.082889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [274.082901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [274.083304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [274.083345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [274.083354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [274.087828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [274.087867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [274.087877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [274.088539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.088881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [274.089430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [274.089789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.089799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [274.090093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [274.093281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [274.093293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [274.093689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [274.094411] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:144]

<7> [274.208000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [275.146160] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [275.146899] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [275.148328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [275.148637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [275.148946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [275.149273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [275.149624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [275.149933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [275.150293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [275.150640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [275.150948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [275.151292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [275.151638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [275.151933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [275.152245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [275.152576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [275.152873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [275.153169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [275.153493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [275.153834] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [275.154162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [275.154489] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [275.154813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [275.155175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [275.155495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [275.155804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [275.156144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [275.156443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [275.156751] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [275.157103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [275.157507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [275.157889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [275.158293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [275.158680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [275.159073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [275.159484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [275.159871] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [275.160158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [275.160455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [275.160764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [275.161039] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [275.161329] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [275.161679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [275.162031] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [275.162428] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [275.162795] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [275.163165] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [275.163560] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [275.163940] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [275.164398] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [275.164725] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [275.165114] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [275.165524] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [275.165900] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [275.166314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [275.166705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [275.167086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [275.167443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [275.167971] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [275.169536] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [275.377457] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [275.379487] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [275.396707] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [275.397287] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [275.397692] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [275.398256] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [275.398681] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [275.450998] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [275.451170] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [275.452577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [275.453367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [275.453859] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [275.459382] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [275.459705] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [275.460343] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [275.461752] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [275.463342] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [275.466509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [275.468072] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [275.469416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [275.470824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [275.472247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [275.473650] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [275.475065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [275.476448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [275.477838] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [275.479232] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [275.481891] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [275.485624] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [275.486991] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [275.585857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [275.587772] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [275.588943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [275.590977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [275.596986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [275.614362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [275.703524] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [275.704835] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [275.705926] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [275.707529] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [275.709785] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [275.711209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [275.713118] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [275.714563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [275.716224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [275.717669] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [275.719119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [275.720500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [275.721961] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [275.723417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [275.724846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [275.726270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [275.727681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [275.729109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [275.730529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [275.731955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [275.733379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [275.734799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [275.736205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [275.737627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [275.739037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [275.740526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [275.741944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [275.743369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [275.744807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [275.746226] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [275.747658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [275.749105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [275.750526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [275.751954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [275.753399] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [275.754828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [275.756291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [275.757727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [275.759198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [275.760623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [275.762069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [275.763491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [275.764907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [275.766334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [275.767776] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [275.769414] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [275.770835] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [275.772217] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [275.773616] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [275.774964] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [275.776362] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [275.777765] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [275.779491] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [275.781058] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [275.782488] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [275.783893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [275.785324] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [275.786741] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [275.788214] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [275.789657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [275.791082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [275.792496] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [275.793851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [275.795270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [275.796683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [275.798088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [275.799503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [275.800911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [275.802335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [275.803740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [275.805177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [275.806583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [275.808000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [275.808967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [275.809901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [275.810832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [275.811748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [275.812683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [275.813625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [275.814564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [275.815506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [275.816441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [275.817319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [275.817997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [275.818708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [275.819408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [275.820090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [275.820804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [275.821517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [275.822224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [275.822904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [275.823611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [275.824321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [275.825001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [275.825705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [275.826350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [275.826892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [275.827459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [275.828002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [275.828564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [275.829104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [275.829669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [275.830233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [275.830775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [275.831349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [275.831893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [275.832459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [275.833004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [275.845194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [275.852780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [275.853178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [275.853826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [275.854633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [275.855409] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [275.856386] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [275.856758] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [275.857153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [275.857516] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [275.857878] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [275.858268] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [275.858631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [275.858991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [275.859367] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [275.859984] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [275.860392] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [275.861039] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [275.861508] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining)

<7> [275.961551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [275.981387] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [275.982194] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [275.983144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [276.031973] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [276.033178] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [276.034294] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [276.035491] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [276.183777] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [276.185397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [276.187402] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [276.190548] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [276.192354] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [276.199464] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [276.200781] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [276.203549] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [276.204693] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [276.205784] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [276.214574] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [276.216157] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [276.220152] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [276.226287] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [276.228513] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [276.230055] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [276.234717] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [276.236200] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [276.238874] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [276.244924] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [276.246409] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [276.250199] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [276.259663] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [276.269857] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [276.272233] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [276.278605] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [276.279755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [276.285703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [276.287549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<6> [276.289985] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [276.289331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.291305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.293230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.293279] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.295139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.301692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.301741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.303476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [276.309228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [276.310615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.311624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.312803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.313835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.313863] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.314603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.318769] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.318796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.401625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [276.402448] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [276.415231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [276.440756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [276.441187] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [276.454212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [276.527859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [276.529176] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [276.541036] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [276.541499] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [276.541883] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [276.542335] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [276.542916] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [276.544411] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [276.545016] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [276.545612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [276.546202] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [276.548099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [276.635226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [276.636814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [276.637673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [276.638823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [276.645256] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [276.645682] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [276.647366] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [276.648930] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.651240] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.652818] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [276.655465] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [276.676772] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [276.679189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [276.684225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [276.686189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [276.687692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [276.689330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [276.690770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [276.692591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [276.693971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [276.695548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [276.697175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [276.698819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [276.700357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [276.701933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [276.703521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [276.704739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [276.706275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [276.707830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [276.709387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [276.710943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [276.712515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [276.713738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [276.715222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [276.716663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [276.718089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [276.719549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [276.721062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [276.722534] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [276.723793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [276.724986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [276.726328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [276.727678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [276.729070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [276.730443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [276.731798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [276.732781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [276.733532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [276.734209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [276.734953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [276.735645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [276.736426] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [276.737083] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [276.737900] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [276.738815] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [276.739637] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [276.740330] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [276.741085] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [276.741696] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [276.742203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [276.742746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [276.743238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [276.743802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [276.745178] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [276.953284] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [276.955580] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [276.961768] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [276.962233] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [276.963130] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [276.964003] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [276.964418] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [277.015776] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [277.015824] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [277.017000] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [277.017721] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [277.018115] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [277.018441] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [277.019565] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [277.020646] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [277.022650] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [277.026512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [277.028534] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [277.030271] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [277.031602] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [277.033063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [277.034321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [277.035662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [277.036918] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [277.038372] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [277.039638] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [277.042249] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [277.111936] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [277.157540] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [277.183579] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [277.195368] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [277.208878] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [277.216647] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [277.247001] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (271 ms remaining)

<7> [277.521240] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [277.592064] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [278.977200] Setting dangerous option force_probe - tainting kernel

<6> [278.989987] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [278.991556] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [278.992025] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [278.992321] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [278.992608] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [278.992975] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [278.993592] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [278.993969] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [278.995240] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [278.995503] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [278.995781] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [278.996059] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [278.996069] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [278.996748] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [278.996805] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [278.997104] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [278.997476] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e23d1fff], io: n/a

<7> [278.997823] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [278.998756] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [278.999223] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [278.999507] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [278.999808] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [279.000144] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [279.009873] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [279.010184] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [279.010467] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [279.010772] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [279.011133] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [279.011424] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [279.011740] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [279.012079] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [279.012365] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [279.012649] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [279.012955] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [279.013294] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [279.013628] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [279.014003] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [279.014336] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [279.014637] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [279.015646] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [279.016002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [279.016307] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [279.016649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [279.016997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [279.017325] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [279.017628] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [279.017968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [279.018279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [279.018582] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [279.018906] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [279.019260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [279.019606] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [279.019924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [279.020266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [279.020570] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [279.020888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [279.021228] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [279.021517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [279.021845] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [279.022177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [279.022485] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [279.022792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [279.023116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [279.023504] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [279.023965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [279.024462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [279.024948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [279.025261] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [279.025549] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [279.025891] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [279.026281] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [279.026793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [279.027188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [279.027562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [279.027877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.028291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [279.028706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [279.029102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [279.029497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [279.030481] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [279.031657] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [279.032462] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [279.033731] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [279.034149] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [279.034541] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [279.034905] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [279.035605] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [279.035801] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [279.036189] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [279.036568] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [279.036962] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [279.037342] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [279.037627] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [279.037935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [279.038285] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [279.038661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [279.039053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [279.039431] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [279.039829] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [279.040136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [279.040410] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [279.040714] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [279.041095] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [279.041473] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [279.046471] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [279.056528] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [279.057030] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [279.057470] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [279.062701] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [279.063028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [279.063327] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [279.063610] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [279.063949] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [279.064347] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [279.064780] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [279.065182] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [279.065588] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [279.066022] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [279.066564] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [279.067530] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [279.067958] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [279.068358] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [279.068770] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [279.069167] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [279.069610] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [279.070277] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [279.070720] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [279.071168] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [279.080862] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [279.081983] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [279.083067] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [279.289631] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [279.290130] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [279.291759] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [279.293979] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [279.303197] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.303212] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [279.303221] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [279.303346] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [279.303786] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [279.304316] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [279.305020] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [279.305588] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [279.306937] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [279.307375] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [279.307834] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [279.308264] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [279.308713] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [279.309199] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [279.310686] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [279.311226] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [279.313437] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [279.314392] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [279.314882] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [279.315969] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [279.316454] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [279.317890] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [279.318377] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [279.318851] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [279.319945] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [279.320378] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [279.320909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [279.321558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [279.322250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [279.322732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [279.323187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [279.323606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [279.324080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [279.324522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [279.325041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [279.325529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [279.326020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [279.326517] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [279.327056] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [279.327545] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [279.328004] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [279.328422] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [279.328863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [279.329329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [279.329770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [279.330210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [279.330665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [279.331158] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [279.331670] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [279.332168] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [279.332671] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [279.333595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [279.334128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [279.334657] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [279.335185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [279.335739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [279.336180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [279.336619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [279.337086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [279.337524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [279.337963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [279.338401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [279.338849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [279.339288] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [279.339769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [279.340211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [279.340662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [279.341077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [279.341519] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [279.341980] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [279.342393] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [279.343165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [279.343615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [279.344072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [279.344515] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [279.345053] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [279.345417] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [279.345817] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [279.346257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [279.350122] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [279.350607] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [279.351091] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [279.384222] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [279.384546] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [279.384861] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [279.385224] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [279.385597] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [279.386054] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [279.386494] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [279.386950] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [279.387389] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [279.388509] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [279.388983] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [279.389412] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [279.389856] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [279.402331] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [279.402755] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [279.403141] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [279.403528] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [279.403930] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [279.404314] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [279.405074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [279.405476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [279.405897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [279.418535] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [279.431530] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [279.432779] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [279.433892] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [279.442959] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [279.450201] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [279.450820] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [279.451926] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [279.465772] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [279.465950] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [279.470861] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [279.478420] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [279.478590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [279.481556] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [279.481847] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [279.495897] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [279.499010] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [279.499190] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [279.507512] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [279.511649] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [279.519676] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [279.566840] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [279.578052] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input35

<7> [279.582046] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [279.587126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [279.587610] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [279.588075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [279.588474] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [279.588909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [279.589310] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [279.589775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [279.590179] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [279.590606] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [279.592154] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [279.592604] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [279.593044] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [279.593456] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [279.595105] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [279.596150] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [279.596311] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [279.596324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [279.596758] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to disconnected

<7> [279.596778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [279.596788] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:110:eDP-1] EDID changed, epoch counter 2

<7> [279.596818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [279.596829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [279.597236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [279.597248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [279.597258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [279.597695] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [279.597854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [279.597866] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [279.597877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [279.598282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [279.598293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [279.598303] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [279.598720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [279.598730] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [279.598738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [279.598746] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [279.598753] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [279.598761] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [279.598768] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [279.598827] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [279.598847] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [279.598963] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [279.598979] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [279.602656] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [279.603140] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [279.603574] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [279.604034] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [279.604173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [279.604187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [279.604602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] disconnected

<7> [279.604640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [279.604651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [279.605054] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [279.605066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [279.605077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [279.605481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [279.605493] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [279.605503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [279.605930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [279.605942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [279.605952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [279.606355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [279.606366] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [279.606374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? no

<7> [279.606381] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [279.606389] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [279.606397] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [279.606404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [279.606458] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [279.606477] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [279.606578] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [279.606607] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [279.606793] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [279.606820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [279.607247] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [279.607794] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [279.608225] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [279.608675] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [279.609106] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [279.609451] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [279.609884] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [279.610261] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [279.610575] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [279.611007] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [279.611427] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [279.611878] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [279.612294] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [279.612736] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [279.613155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [279.613546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [279.613904] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [279.614310] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [279.615883] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [279.616268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [279.616597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [279.617049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [279.617481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [279.617923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.618766] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [279.619110] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [279.619446] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [279.619806] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [279.620144] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [279.620481] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [279.620843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [279.621183] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [279.621519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [279.621884] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [279.622136] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [279.622452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [279.622799] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [279.623125] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [279.623450] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [279.623793] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [279.624133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [279.624465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [279.624811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [279.625078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [279.625318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [279.625634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [279.625949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [279.626264] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [279.626582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [279.626914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [279.627239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [279.627560] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [279.627873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [279.628116] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [279.628382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [279.628718] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [279.629035] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [279.629348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [279.629679] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [279.630006] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [279.630319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [279.630553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [279.630884] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [279.631224] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [279.631562] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [279.631909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [279.632251] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [279.632591] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [279.632941] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [279.633281] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [279.633636] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [279.633973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [279.634313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [279.634662] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [279.634999] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [279.635338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [279.635700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [279.636041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [279.636381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [279.636726] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [279.637048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [279.637366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [279.637703] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [279.638022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [279.638356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [279.638700] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [279.639021] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [279.639025] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [279.639029] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [279.656236] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [279.657480] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [279.658763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.659933] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.661946] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [279.697344] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.697787] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.698172] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.698553] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.698983] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.699371] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.700199] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.700630] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.701013] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [279.723658] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [279.750499] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [279.756322] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [280.857854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.818392] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD off

<7> [281.819316] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [281.820255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [281.821397] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [281.821814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.822035] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [281.822107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.822450] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [281.823421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.823539] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [281.824367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.829352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.876505] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [281.901514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.909468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.909837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.910134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.911273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.911869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.912801] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [281.913183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [281.913493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [281.913859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [281.914220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [281.925500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.925841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [281.926125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.926446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.927239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.037694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.038001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [282.038687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.039319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.039905] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.047644] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.047931] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.048167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.048607] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.048870] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.049169] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.049443] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.049692] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.049971] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.050933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.051945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [282.052899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [282.053170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [282.053875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [282.118248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [282.118650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [282.119384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [282.120146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.120873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [282.121439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [282.121936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [282.122457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [282.122994] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [282.155609] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [282.178335] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [282.189688] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [282.193223] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [282.208716] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [282.215052] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [282.243686] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (77 ms remaining)

<7> [282.328551] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [282.338412] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [283.739051] Setting dangerous option force_probe - tainting kernel

<6> [283.751915] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [283.753515] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [283.753951] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [283.754274] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [283.754581] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [283.754921] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [283.755391] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [283.755655] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [283.756756] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [283.757034] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [283.757338] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [283.757676] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [283.757691] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [283.758647] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [283.758705] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [283.759105] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [283.759443] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7715 MiB [mem 0x00000000-0x1e23d1fff], io: n/a

<7> [283.759681] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [283.760517] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [283.761008] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [283.761425] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [283.761801] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [283.762083] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [283.772263] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [283.772585] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [283.772866] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [283.773180] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [283.773594] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [283.774002] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [283.774421] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [283.774834] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [283.775158] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [283.775489] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [283.775861] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [283.776277] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [283.776682] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [283.777100] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [283.777502] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [283.777808] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [283.778707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [283.779042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [283.779368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [283.779718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [283.780105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [283.780519] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [283.780934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 850)

<7> [283.781365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [283.781764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [283.782059] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [283.782384] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [283.782708] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [283.782991] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [283.783345] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [283.783660] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [283.783952] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [283.784261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [283.784625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [283.784934] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [283.785266] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [283.785590] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [283.785872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [283.786175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [283.786491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [283.786886] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [283.787335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [283.787735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [283.788040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [283.788428] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [283.788819] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [283.789220] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [283.789607] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [283.790084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.790405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [283.790693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [283.791112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [283.791590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [283.791987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [283.792403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [283.792742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [283.793859] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [283.795058] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [283.796375] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [283.796798] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [283.797210] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [283.797568] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [283.798268] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [283.798755] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [283.799269] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [283.799660] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [283.799985] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [283.800310] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [283.800616] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [283.800890] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [283.801184] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [283.801503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [283.801778] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [283.802052] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [283.802342] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [283.802661] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [283.802935] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [283.803252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [283.803537] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [283.803811] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [283.804100] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [283.809511] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [283.813421] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [283.813891] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:109:DDI A/PHY A] Using AUX CH A (VBT)

<7> [283.814348] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:109:DDI A/PHY A]

<7> [283.823142] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [283.823480] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [283.823774] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [283.824063] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [283.824536] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [283.824945] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [283.825370] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [283.825765] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [283.826357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [283.826675] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [283.827206] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:109:DDI A/PHY A] initial power sequencer: PPS 0

<7> [283.827651] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [283.828039] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [283.828471] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [283.828858] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [283.829895] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [283.830384] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [283.831065] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [283.831945] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [283.832430] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [283.842265] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [283.842595] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [283.842866] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [284.049850] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [284.051809] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [284.053355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [284.056936] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [284.072787] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.072829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.072856] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.073484] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.074720] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:110:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.076091] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:110:eDP-1] DRRS type: static

<7> [284.077689] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:110:eDP-1] Using native PCH PWM for backlight control

<7> [284.079281] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:110:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [284.081215] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [284.082609] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [284.083820] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [284.085211] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [284.086406] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [284.087837] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [284.090635] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:117:DDI B/PHY B] Using AUX CH B (VBT)

<7> [284.092181] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:117:DDI B/PHY B]

<7> [284.096039] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [284.097463] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:117:DDI B/PHY B]

<7> [284.098706] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:117:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [284.101615] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:132:DDI C/PHY C] Using AUX CH C (VBT)

<7> [284.103017] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:132:DDI C/PHY C]

<7> [284.106293] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [284.107648] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:132:DDI C/PHY C]

<7> [284.108884] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:132:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [284.112477] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [284.113809] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [284.114788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] hw state readout: disabled

<7> [284.116787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] hw state readout: disabled

<7> [284.118855] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] hw state readout: disabled

<7> [284.120365] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [284.122167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A

<7> [284.123744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] hw state readout: disabled, pipe A

<7> [284.125244] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] hw state readout: disabled, pipe B

<7> [284.126716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] hw state readout: disabled, pipe B

<7> [284.128211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] hw state readout: disabled, pipe B

<7> [284.129673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] hw state readout: disabled, pipe C

<7> [284.131171] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] hw state readout: disabled, pipe C

<7> [284.132711] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] hw state readout: disabled, pipe C

<7> [284.134421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [284.135836] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [284.137111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST A] hw state readout: disabled, pipe A

<7> [284.138478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST B] hw state readout: disabled, pipe B

<7> [284.139774] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:121:DP-MST C] hw state readout: disabled, pipe C

<7> [284.141340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [284.142678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST A] hw state readout: disabled, pipe A

<7> [284.144119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST B] hw state readout: disabled, pipe B

<7> [284.145701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST C] hw state readout: disabled, pipe C

<7> [284.147280] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [284.148765] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [284.150255] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [284.151766] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [284.153504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:eDP-1] hw state readout: disabled

<7> [284.154713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:118:DP-1] hw state readout: disabled

<7> [284.155754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:127:HDMI-A-1] hw state readout: disabled

<7> [284.156797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:133:DP-2] hw state readout: disabled

<7> [284.157793] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:139:HDMI-A-2] hw state readout: disabled

<7> [284.158611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [284.159499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz

<7> [284.160331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:cursor A] min_cdclk 0 kHz

<7> [284.161179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:58:pipe A] min_cdclk 0 kHz

<7> [284.161948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:59:plane 1B] min_cdclk 0 kHz

<7> [284.162828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:plane 2B] min_cdclk 0 kHz

<7> [284.163606] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:77:cursor B] min_cdclk 0 kHz

<7> [284.164261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe B] min_cdclk 0 kHz

<7> [284.164858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 1C] min_cdclk 0 kHz

<7> [284.165457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 2C] min_cdclk 0 kHz

<7> [284.166066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:102:cursor C] min_cdclk 0 kHz

<7> [284.166635] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:108:pipe C] min_cdclk 0 kHz

<7> [284.167224] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:58:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.167812] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:83:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.168456] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:108:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [284.169498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [setup_hw_state]

<7> [284.170119] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [setup_hw_state]

<7> [284.170724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [setup_hw_state]

<7> [284.171321] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [284.172010] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [284.172454] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [284.172854] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [284.173382] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [284.176765] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [284.177252] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [284.177799] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [284.204642] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [284.205055] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [284.205403] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [284.205751] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [284.206169] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 0: start 0x8

<7> [284.206589] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 1: start 0x108

<7> [284.207004] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 2: start 0x208

<7> [284.207538] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 3: start 0x308

<7> [284.207953] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:58:pipe A] FQ 4: start 0x3c8

<7> [284.208378] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 0: start 0x8

<7> [284.208791] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 1: start 0x108

<7> [284.209214] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 2: start 0x208

<7> [284.209627] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 3: start 0x308

<7> [284.210050] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:83:pipe B] FQ 4: start 0x3c8

<7> [284.210465] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 0: start 0x8

<7> [284.210880] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 1: start 0x108

<7> [284.211304] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 2: start 0x208

<7> [284.211721] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 3: start 0x308

<7> [284.212176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:108:pipe C] FQ 4: start 0x3c8

<7> [284.212963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [fastset]

<7> [284.213399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:83:pipe B] enable: no [fastset]

<7> [284.213817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:108:pipe C] enable: no [fastset]

<7> [284.214539] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [284.215486] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:83:pipe B]

<7> [284.216199] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:108:pipe C]

<7> [284.218228] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [284.225485] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:110:eDP-1] adding connector to sysfs

<7> [284.229242] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:110:eDP-1] backlight device intel_backlight registered

<7> [284.229760] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:110:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [284.230883] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [284.233802] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:110:eDP-1] generating connector hotplug event

<7> [284.233942] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:118:DP-1] adding connector to sysfs

<7> [284.236116] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [284.239886] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:118:DP-1] generating connector hotplug event

<7> [284.240023] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:127:HDMI-A-1] adding connector to sysfs

<7> [284.240984] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:127:HDMI-A-1] generating connector hotplug event

<7> [284.241146] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:133:DP-2] adding connector to sysfs

<7> [284.242789] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [284.244840] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:133:DP-2] generating connector hotplug event

<7> [284.244961] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:139:HDMI-A-2] adding connector to sysfs

<7> [284.248566] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:139:HDMI-A-2] generating connector hotplug event

<6> [284.248661] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [284.254372] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [284.295543] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [284.308158] input: Video Bus as /devices/pci0000:00/LNXVIDEO:00/input/input39

<7> [284.309575] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [284.315004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.316422] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:58:pipe A] not active, skipping

<7> [284.316863] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:83:pipe B] not active, skipping

<7> [284.317307] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:108:pipe C] not active, skipping

<7> [284.317725] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [284.318466] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [284.319505] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.319799] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:118:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.320268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.321313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.321741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.322377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.322832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.322845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.323256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.327235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.327252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.327768] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:127:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.328745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.333365] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:133:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.333846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.334588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.334994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.335591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.338254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.338268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.338685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.342210] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.342225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.342684] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:139:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [284.344405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [284.344419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [284.344974] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.345498] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [284.347126] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.347500] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.347946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.347960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.347970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.348014] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [284.349124] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.349546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.350680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] status updated from unknown to connected

<7> [284.350962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [284.350973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.350985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.350997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.351008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.351482] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [284.355874] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.355894] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.355905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.356983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.357445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.358073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.358549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.358562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.358965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.365087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.365104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.365590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.365606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.365617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.371717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.371736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.371747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.372500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.372903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.373450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.373767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.373776] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.374355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.377930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.377942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.378498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.378512] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [284.378522] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [284.378530] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [284.378537] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [284.378544] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [284.378605] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.378640] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [284.378649] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [284.378681] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [284.378819] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [284.378877] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [284.386229] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb

<6> [284.388281] fbcon: i915drmfb (fb0) is primary device

<6> [284.390122] Console: switching to colour frame buffer device 200x56

<6> [284.390141] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [284.390155] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [284.390637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [284.391260] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [284.391281] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.392044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [284.392067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [284.392766] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.393222] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.393627] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.394301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.394316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.394335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.394410] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [284.394822] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.395969] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.397315] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [284.397769] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [284.398862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [284.398886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.398898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.398911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.398922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.400196] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [284.400643] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [284.401277] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [284.401716] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [284.402350] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [284.402794] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [284.403404] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [284.403842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [284.404525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.404544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.404555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.405589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.406075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.406670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.407157] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.407170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.407563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.411716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.411733] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.412458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.412474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.412486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.413618] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [284.414249] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [284.414678] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [284.415281] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [284.415709] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [284.416345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [284.416779] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [284.417540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.417562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.417574] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.418306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.418708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.419307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.419750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.419762] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.420398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.423982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.423994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.424046] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [284.424510] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [284.424716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.424729] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [284.424738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [284.424745] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [284.424751] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [284.424757] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [284.424916] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [284.425841] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.425891] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [284.425901] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [284.425975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [284.426612] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [284.427086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [284.427520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [284.427874] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [284.427958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [284.428400] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [284.428793] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [284.428793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [284.429255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.429764] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [284.429891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [284.430253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [284.430387] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [284.430598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [284.430836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [284.430946] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [284.431310] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [284.431497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [284.431653] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [284.432000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [284.431955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [284.432591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [284.433224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [284.433655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [284.434259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [284.434702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [284.434904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [284.435418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [284.435523] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [284.435889] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [284.435872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [284.436405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [284.436587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [284.436760] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [284.437143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [284.437232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [284.437507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [284.437688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [284.437855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [284.438379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [284.438807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [284.439428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [284.439852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [284.440447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [284.440775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [284.440864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [284.441211] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [284.441460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [284.441543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [284.441877] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [284.441900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [284.442242] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [284.442573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [284.442537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [284.442908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [284.442976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [284.443262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [284.443592] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [284.443584] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [284.443926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [284.444180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [284.444309] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [284.444645] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [284.444618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [284.444978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [284.445315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [284.445495] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [284.445738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [284.445856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [284.446296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [284.446357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [284.446643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [284.446803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [284.446978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [284.447404] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [284.447498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [284.447755] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [284.447940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [284.448536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [284.448946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [284.449535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [284.449957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dpll_hw_state

<7> [284.450541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [284.450811] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [284.450958] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [284.451385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [284.451510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [284.451742] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [284.451945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [284.452108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [284.452441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [284.452633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [284.452771] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [284.453121] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [284.453256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [284.453452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [284.453698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [284.453788] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [284.454140] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [284.454322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [284.454472] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [284.454807] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [284.454764] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [284.455228] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [284.455453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [284.455556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [284.455891] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [284.455899] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [284.456254] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [284.456500] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [284.456587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [284.456922] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [284.456936] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [284.457380] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [284.457572] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [284.457711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [284.458060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [284.458165] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [284.458393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [284.458601] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [284.458728] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [284.459074] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [284.459337] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [284.459403] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [284.459737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [284.459821] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [284.460088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [284.460420] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [284.460424] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [284.460428] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [284.460478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [284.460879] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [284.461480] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [284.461863] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [284.462418] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [284.462793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [284.463331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [284.463632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [284.463932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [284.464509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [284.464874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [284.465419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [284.465782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [284.466303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [284.466640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [284.466944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [284.467479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [284.467840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [284.468369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [284.468682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [284.469002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [284.469498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [284.469848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [284.470337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [284.470696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [284.471241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [284.471596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [284.471955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [284.472486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [284.472849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [284.473390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.473734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.474249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [284.474609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.474969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [284.475547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [284.475910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<6> [284.476526] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [284.476430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [284.476787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [284.477300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [284.477625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [284.477930] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [284.478381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [284.478667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [284.478924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [284.479462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [284.479829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [284.480285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [284.480652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [284.481188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [284.481552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [284.481915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [284.482449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [284.482808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [284.484465] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [284.490978] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [284.491371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [284.491728] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [284.492126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [284.492489] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [284.492846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [284.493210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [284.493567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [284.493922] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [284.496463] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [284.496768] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [284.497814] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [284.498249] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [284.498548] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [284.509064] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.509468] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [284.509866] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [284.712163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.714209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.717386] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [284.723469] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [284.724832] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [284.728506] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [284.730080] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [284.731524] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [284.737212] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [284.739155] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [284.740947] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [284.745889] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [284.747322] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [284.748597] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [284.753637] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [284.755383] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [284.758681] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [284.762063] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [284.763883] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [284.766418] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [284.772161] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 453 us, max time under evasion is 250 us

<7> [284.778958] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [284.788373] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [284.790652] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [284.793734] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<7> [284.802957] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [284.802556] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [284.803341] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [284.803386] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [284.803877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [284.803928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [284.805845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.810899] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [284.819581] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.819937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.821852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.824833] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.826894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.826955] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.827146] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.827328] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [284.829028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.833832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.839807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [284.839843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.839877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.839912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.839941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.846794] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.846841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.846874] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.848547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.849356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.851387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.852592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.852619] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.853674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.858215] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.858238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.858879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.858903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.858921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.863999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.864026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.864043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.864928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.865569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.868808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.869269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.869293] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.869680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.873772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.873786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.874403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.874418] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] enabled? yes

<7> [284.874428] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:118:DP-1] enabled? no

<7> [284.874437] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:127:HDMI-A-1] enabled? no

<7> [284.874446] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:133:DP-2] enabled? no

<7> [284.874454] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:139:HDMI-A-2] enabled? no

<7> [284.874515] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [284.874549] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:110:eDP-1] found preferred mode: 3200x1800

<7> [284.874558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [284.875409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:58:pipe A] desired mode 3200x1800 set (0,0)

<7> [284.875633] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [284.875672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [284.875684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [284.876347] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.876741] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.877108] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.877499] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.877512] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.877521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.877564] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [284.877947] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.878352] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.880150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [284.880164] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.880176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.880334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.880345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.884861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.885034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.885002] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.885046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.885463] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.885834] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.886009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.886251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.886403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.886635] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.886986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.887045] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.887435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.887421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.887446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.887803] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.887814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.888263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.891096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.891110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.891531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.891671] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.891681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.896182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.896316] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.896328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.897148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.897496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.897941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.898246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.898255] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.898496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.901618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.901633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.902065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.909606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.909629] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.914190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.915140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.915153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.915837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.916247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.916776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.917649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.917662] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<6> [284.917972] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [284.918052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.921506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.921521] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<6> [284.921856] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [284.921940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.923195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.923208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.927706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.928439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.928449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.929107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.929387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.929818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.930125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.930136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.930436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.933705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.933717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<6> [284.935084] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [284.936084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.937753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1]

<7> [284.937776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:110:eDP-1]

<7> [284.938267] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [284.938567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [284.938819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [284.939160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.939172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD monitor

<7> [284.939181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:110:eDP-1] ELD size 20, SAD count 0

<7> [284.939223] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] VRR capable: no

<7> [284.939487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [284.939738] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:110:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [284.940799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:110:eDP-1] probed modes:

<7> [284.940811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [284.940821] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [284.940864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1]

<7> [284.940874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [284.950110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:118:DP-1] disconnected

<7> [284.950184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1]

<7> [284.950194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [284.950855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.951318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [284.951871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [284.952294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.952305] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.952663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [284.956444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [284.956457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [284.956881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:127:HDMI-A-1] disconnected

<7> [284.956997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2]

<7> [284.957008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [284.961581] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:133:DP-2] disconnected

<7> [284.961642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2]

<7> [284.961652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [284.962213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.962489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [284.962923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [284.963403] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.963415] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [284.963765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [284.967386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [284.967399] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [284.967822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:139:HDMI-A-2] disconnected

<7> [284.971797] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [286.022246] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:58:pipe A]

<7> [286.022710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [286.023815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [286.024866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [286.025142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [286.025417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [286.025692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [286.026001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [286.026323] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [286.026598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [286.026891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [286.027199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [286.027473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [286.027745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [286.028051] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [286.028368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [286.028642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [286.028937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [286.029244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [286.029518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [286.029791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [286.030082] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [286.030390] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [286.030662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [286.030951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [286.031272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [286.031612] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [286.031924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [286.032232] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [286.032552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [286.032847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [286.033211] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [286.033588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [286.033979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [286.034349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [286.034720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [286.035119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [286.035493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [286.035859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [286.036138] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [286.036405] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [286.036670] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [286.037001] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [286.037317] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [286.037567] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [286.037846] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [286.038155] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.038413] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.038667] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [286.039041] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [286.039366] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [286.039662] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [286.039965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [286.040274] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [286.040540] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [286.040848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [286.041179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [286.041443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [286.041956] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [286.043694] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [286.233501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.249008] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [286.250508] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [286.265199] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [286.265752] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [286.266175] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [286.266760] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [286.267138] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [286.318951] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [286.319768] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.320008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [286.321020] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [286.321364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [286.325030] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [286.325154] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [286.326605] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [286.327026] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [286.328528] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.331210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [286.332476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [286.333483] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [286.334612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [286.335631] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [286.336826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [286.337738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [286.338702] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [286.340020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [286.341123] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [286.343245] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [286.345921] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:83:pipe B]

<7> [286.346702] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:108:pipe C]

<7> [286.448467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [286.450350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [286.451690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [286.453281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [286.455817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [286.474938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [286.564696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:110:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [286.566437] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:109:DDI A/PHY A][CRTC:58:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [286.567424] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1119750 available 2160000

<7> [286.568699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [286.570522] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:109:DDI A/PHY A] [CRTC:58:pipe A]

<7> [286.571758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [286.573013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [286.574078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [286.575225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [286.576350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [286.577741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [286.579322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [286.580710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [286.582101] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [286.583229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [286.584602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [286.585974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [286.587345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [286.588697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [286.590085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [286.591482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [286.592756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [286.593823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [286.594973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [286.596008] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [286.597206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [286.598209] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [286.599336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [286.600369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [286.601520] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [286.602746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [286.603990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [286.605000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [286.606146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [286.607189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [286.608344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [286.609330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [286.610495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [286.611608] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [286.612836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [286.614176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [286.615553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [286.616942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [286.618318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [286.619718] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [286.621148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [286.622152] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [286.623269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [286.624264] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [286.625395] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [286.626351] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [286.627491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [286.628883] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [286.630137] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [286.631178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [286.632233] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [286.633212] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [286.634290] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:58:pipe A] allocated DPLL 0

<7> [286.635299] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:58:pipe A] reserving DPLL 0

<7> [286.636360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: yes [modeset]

<7> [286.637337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [286.638421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [286.639644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [286.640697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [286.641879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [286.643244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [286.644603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [286.645956] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [286.647337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [286.648571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [286.649592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [286.650962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [286.652329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [286.653691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [286.655067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [286.656269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [286.657344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [286.658698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [286.660068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [286.661428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [286.662833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [286.663698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [286.664411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [286.665323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [286.666238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.667146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.668063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [286.668982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.669649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [286.670337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [286.671257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [286.672158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [286.672881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [286.673533] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [286.674195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [286.674692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [286.675292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [286.675970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [286.676621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.677295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.677973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.678478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [286.678979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [286.679633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:111] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [286.680353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [286.681029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [286.681620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [286.682180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [286.693871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [286.703530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [286.703981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.704268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.705594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [286.706402] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [286.707610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [286.707934] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [286.708215] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [286.708471] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [286.708707] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [286.708974] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [286.709260] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [286.709494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [286.709729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [286.710204] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:58:pipe A]

<7> [286.710469] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [286.710958] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power on

<7> [286.711306] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (110 ms remaining)

<7> [286.824160] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [286.913314] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.914616] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power on

<7> [286.915840] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [286.964694] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [286.965941] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [286.967056] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [286.968328] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [287.116695] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.118086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [287.119447] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.122513] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turning VDD on

<7> [287.124160] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [287.129761] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [287.130847] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [287.133852] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [287.135127] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.136393] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [287.140342] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Clock recovery OK

<7> [287.141961] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [287.144075] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [287.149539] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [287.151004] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [287.152525] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [287.156815] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [287.158378] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:110:eDP-1][ENCODER:109:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [287.161190] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [287.164554] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [287.166104] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [287.168315] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 37

<7> [287.173149] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 338 us, max time under evasion is 250 us

<7> [287.180345] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [287.186981] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [287.188686] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [287.194131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:118:DP-1]

<7> [287.195572] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [287.201899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:127:HDMI-A-1]

<7> [287.203505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.205473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.207528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.209471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.209512] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.211376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.217805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.217850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.222139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:133:DP-2]

<7> [287.227916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:139:HDMI-A-2]

<7> [287.230186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.231521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.233870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.235294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.235335] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.237194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.243426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.243470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.339264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.340095] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.352882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.378284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.378731] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.391520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.452516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.454820] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.463528] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.463987] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.464372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.464797] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.465227] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.465612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.466049] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.466458] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.466927] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.468119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.551255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.552521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [287.553154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [287.553839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [287.558702] Console: switching to colour dummy device 80x25

<7> [287.559082] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:111] is removed

<7> [287.559307] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [287.560739] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [287.561520] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.562257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.562968] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [287.564191] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [287.580596] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [287.581852] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [287.583125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [287.584765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [287.585549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [287.586292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [287.586971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [287.587585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [287.588982] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.589839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [287.590668] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.591472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.592438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.593432] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.594188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.594909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.595484] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.596097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.596798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.597389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.598038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [287.598822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [287.599480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [287.600124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [287.600946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [287.601790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [287.602591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [287.603443] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [287.604285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [287.605070] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [287.605785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [287.606578] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [287.607423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [287.608250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [287.609090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [287.609933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [287.610766] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [287.611481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [287.612133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [287.612970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:58:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [287.613798] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:58:pipe A] fastset requirement not met, forcing full modeset

<7> [287.614607] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:58:pipe A] releasing DPLL 0

<7> [287.615564] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:58:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [287.616485] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [287.617238] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:58:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [287.618080] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.618902] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [287.619730] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [287.620537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:58:pipe A] enable: no [modeset]

<7> [287.621382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [287.622161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [287.622795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:cursor A] fb: [NOFB], visible: no

<7> [287.624600] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [287.832114] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:110:eDP-1] set backlight PWM = 0

<7> [287.834342] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [287.851486] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 turn panel power off

<7> [287.851876] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [287.852977] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [287.853457] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - short

<7> [287.854581] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [287.905961] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.907329] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:109:DDI A/PHY A] - long

<7> [287.907711] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.908928] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.912308] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [287.913034] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:58:pipe A]

<7> [287.914102] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:109:DDI A/PHY A]

<7> [287.915426] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [287.917246] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [287.920991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DDI A/PHY A]

<7> [287.923076] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DDI B/PHY B]

<7> [287.924901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST A]

<7> [287.926720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST B]

<7> [287.928475] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:121:DP-MST C]

<7> [287.930097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DDI C/PHY C]

<7> [287.931461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST A]

<7> [287.932857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST B]

<7> [287.934236] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:136:DP-MST C]

<7> [287.935602] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:110:eDP-1]

<7> [287.938241] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:58:pipe A]

<7> [288.016800] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [288.062571] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:110:eDP-1] removing connector from sysfs

<7> [288.090427] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:118:DP-1] removing connector from sysfs

<7> [288.100362] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:127:HDMI-A-1] removing connector from sysfs

<7> [288.121641] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:133:DP-2] removing connector from sysfs

<7> [288.126962] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:139:HDMI-A-2] removing connector from sysfs

<7> [288.154744] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 wait for panel power cycle (255 ms remaining)

<7> [288.416134] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:109:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [288.426793] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [288.962517] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [288.963602] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload