Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gc7d12b349 (x86_64) (Linux: 7.0.0-rc2-CI_DRM_18106-g986ab51c0937+ x86_64)
Out 
Using IGT_SRANDOM=1772924565 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.025s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.025s)
Dmesg
<6> [250.428992] Console: switching to colour dummy device 80x25
<6> [250.429985] [IGT] kms_force_connector_basic: executing
<7> [250.633592] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.634531] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.635026] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.635934] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [250.635948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.635956] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.636278] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.636615] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.637041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.637357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.637812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.638068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.638076] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.638370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.639755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.639764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.640024] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.640391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.640485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.640493] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.640763] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.641021] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.641468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.641726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.642123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.642420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.642428] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.642685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.643961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.643969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.644253] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.644530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.644642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.644649] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.644915] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.645207] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.645680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.645934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.646369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.646626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.646635] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.646891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.648204] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.648212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.648472] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.648732] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [250.649691] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.650296] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [250.650309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.650317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [250.650484] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.650587] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.650535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.650979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.651617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.652033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.652059] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.652519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.654337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.654362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.654908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [250.654919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.654931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.654941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.654951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.654961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.655062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.655313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.655733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.656343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.656758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.656783] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.657233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.658983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.659009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.659612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [250.659623] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.659634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.659644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.659654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.659663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.660178] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [250.660234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.660322] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [250.660332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [250.660635] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [250.660655] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [250.660672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [250.660679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [250.660689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [250.660698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.660707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.660716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.660725] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.661030] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [250.661129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.661207] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [250.661218] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [250.661227] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 58
<7> [250.661510] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [250.661528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [250.661535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [250.661544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.661553] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.661562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.661571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.661827] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [250.661884] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.662150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.662473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.662883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.663345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.663361] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.663628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.664936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.664951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.665360] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [250.665376] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [250.665388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [250.665393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.665398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.665403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.665408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.665413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.665733] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing
<7> [250.665743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.665750] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.666032] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.666335] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.666787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.667040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.667487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.667755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.667763] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.668020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.669395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.669404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.669663] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.669920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [250.669931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.669937] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 60
<7> [250.670005] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.670119] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.670209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.670221] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.670619] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.670892] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.671387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.671650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.672069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.672361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.672372] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.672706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.674014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.674025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.674327] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.674642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [250.675664] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [250.676369] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.677136] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:72:LVDS-1] force updated from 0 to 0 or reprobing
<7> [250.677153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [250.677171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [250.677182] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [250.677321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [250.677329] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [250.677418] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [250.677431] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [250.677439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [250.677516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [250.677521] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [250.677691] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:LVDS-1] EDID override reset
<7> [250.677723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [250.677731] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [250.677736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [250.677807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [250.677812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [250.678067] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [250.678075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.678081] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.678426] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.678778] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.679227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.679522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.679930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.680408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.680418] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.680688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.682129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.682145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.682429] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.682690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.682789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.682797] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.683064] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.683426] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.683860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.684141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.684602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.685022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.685034] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.685651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.687379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.687392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.687775] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.688245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.688582] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [250.688634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.688644] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.689046] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.689480] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.690075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.690518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.691092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.691510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.691522] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.691919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [250.693627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [250.693639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [250.694020] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [250.694514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [250.695006] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.695020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [250.695030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [250.747136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [250.763160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.763185] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.763587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.779170] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.779191] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.779587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [250.779711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [250.779722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [250.831750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [250.848162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.848175] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.848432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.864154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.864164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.864430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [250.864649] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [250.864683] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [250.864689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [250.916747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [250.933163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.933179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.933454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.949160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.949171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.949466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [250.949722] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [250.949757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [250.949764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [250.954085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [250.954635] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:92:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.954653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [250.954665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [250.955526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.955805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [250.956237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.956502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.956511] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.956764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [250.958072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.958081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [250.958402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [250.958509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [250.958517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [250.958932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.959217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [250.959645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.959907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.959914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.960195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [250.961502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.961511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [250.961770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [250.961991] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:92:HDMI-A-2] EDID override reset
<7> [250.962025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [250.962032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [250.962498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.962754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [250.963173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [250.963444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.963451] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.963702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [250.964991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [250.965002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [250.965361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [250.965804] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:96:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [250.965817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [250.965824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [250.966325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.966589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [250.966998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.967283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.967294] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.967643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [250.968998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.969008] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [250.969335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [250.969439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [250.969450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [250.969898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.970179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [250.970639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.970913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.970921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.971221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [250.972547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.972555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [250.972815] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [250.973031] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:96:HDMI-A-3] EDID override reset
<7> [250.973064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [250.973071] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [250.973546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.973944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [250.974537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [250.974916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.974927] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.975345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [250.977035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [250.977046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [250.977474] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [250.977797] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:DP-2] EDID override reset
<7> [250.977847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [250.977857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [250.982343] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [250.982639] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:DP-3] EDID override reset
<7> [250.982688] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [250.982698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [250.987172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<6> [250.989533] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [250.990458] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.995982] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [250.995997] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [250.996819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [250.996839] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [250.996851] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [250.996986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [250.996996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [250.997007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [250.997017] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [250.997759] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [250.998234] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [250.998833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.999317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [250.999738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [250.999996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.000005] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.000300] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.001704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.001713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.001973] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.002255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [251.002267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [251.002274] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [251.054164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [251.070216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.070254] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.071227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.087158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.087174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.087457] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [251.087468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [251.087475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [251.091752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [251.091768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [251.091778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [251.092424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [251.092840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [251.093444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [251.093848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [251.093860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.094298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [251.096118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [251.096131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [251.096528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [251.096541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [251.096552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [251.097155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [251.097454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [251.097865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [251.098151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [251.098161] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.098442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [251.099776] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [251.099786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [251.100049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [251.100058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [251.100065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [251.104395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [251.104413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [251.104424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [251.108942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<7> [251.108957] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] enabled? yes
<7> [251.108964] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:76:VGA-1] enabled? no
<7> [251.108969] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:79:HDMI-A-1] enabled? no
<7> [251.108973] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:DP-1] enabled? no
<7> [251.108977] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:92:HDMI-A-2] enabled? no
<7> [251.108981] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:96:HDMI-A-3] enabled? no
<7> [251.108985] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:100:DP-2] enabled? no
<7> [251.108989] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:104:DP-3] enabled? no
<7> [251.109018] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [251.109042] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] found preferred mode: 1366x768
<7> [251.109047] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [251.109073] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:52:pipe A] desired mode 1366x768 set (0,0)
<7> [251.112348] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [251.129585] Console: switching to colour frame buffer device 170x48
Created at 2026-03-08 00:57:11