Results for igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt

Result: Pass

integration-manifest git-log-oneline i915_display_info14 igt_runner14 runtimes14 results14.json results14-i915-load.json guc_logs14.tar i915_display_info_post_exec14 boot14 dmesg14

DetailValue
Duration 2.65 seconds
Hostname
shard-rkl-5
Igt-Version
IGT-Version: 2.3-g911c75d8e (x86_64) (Linux: 7.0.0-rc2-CI_DRM_18100-gce63d46cc8fc+ x86_64)
Out
Using IGT_SRANDOM=1772832226 for randomisation
Opened device: /dev/dri/card0
FBC last action not supported
Can't test PSR: no usable eDP screen.
Can't test DRRS: no usable screen.
Starting subtest: fbc-1p-primscrn-indfb-pgflip-blt
Subtest fbc-1p-primscrn-indfb-pgflip-blt: SUCCESS (2.654s)
Err
Starting subtest: fbc-1p-primscrn-indfb-pgflip-blt
Subtest fbc-1p-primscrn-indfb-pgflip-blt: SUCCESS (2.654s)
Dmesg
<6> [300.532516] Console: switching to colour dummy device 80x25
<6> [300.532872] [IGT] kms_frontbuffer_tracking: executing
<7> [300.535630] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [300.536153] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [300.536379] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [300.540733] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]
<7> [300.540740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]
<7> [300.544968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] disconnected
<7> [300.545230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]
<7> [300.545234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]
<7> [300.549423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected
<7> [300.549666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]
<7> [300.549669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]
<7> [300.553852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected
<7> [300.554149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1]
<7> [300.554154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:389:HDMI-A-1]
<7> [300.583697] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [300.583706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [300.583709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:HDMI-A-1] ELD monitor fitHeadless4k
<7> [300.583712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:HDMI-A-1] ELD size 36, SAD count 0
<7> [300.585994] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: DP-HDMI ADAPTOR\004 (err 0)
<7> [300.588436] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode adaptor ID: a0 (err 0)
<7> [300.592270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] DP dual mode adaptor (type 2 HDMI) detected (max TMDS clock: 600000 kHz)
<7> [300.592432] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] Ignoring DP dual mode adaptor max TMDS clock for native HDMI port
<7> [300.592931] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)
<7> [300.592937] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [300.592942] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [300.592948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:HDMI-A-1] probed modes:
<7> [300.592950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5
<7> [300.592953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5
<7> [300.592955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa
<7> [300.592958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa
<7> [300.592960] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa
<7> [300.592962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa
<7> [300.592965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa
<7> [300.592967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [300.592969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
<7> [300.592972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [300.592974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [300.592976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6
<7> [300.592979] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa
<7> [300.592981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
<7> [300.592983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
<7> [300.592986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [300.592988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [300.592990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [300.592993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<7> [300.592995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.592997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa
<7> [300.592999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa
<7> [300.593002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6
<7> [300.593004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
<7> [300.593006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<7> [300.593009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.593011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<7> [300.593013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.593016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.593018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.593020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<7> [300.593044] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2]
<7> [300.593047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:399:HDMI-A-2]
<7> [300.597239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-2] disconnected
<7> [300.597252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1]
<7> [300.597255] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:403:DP-1]
<7> [300.601460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:403:DP-1] disconnected
<7> [300.601472] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3]
<7> [300.601474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:411:HDMI-A-3]
<7> [300.605674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:411:HDMI-A-3] disconnected
<7> [300.606804] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:418]
<7> [300.606865] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:419]
<7> [300.606938] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:420]
<7> [300.607013] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:421]
<7> [300.607084] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:422]
<6> [300.608559] [IGT] kms_frontbuffer_tracking: starting subtest fbc-1p-primscrn-indfb-pgflip-blt
<7> [300.609098] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:418]
<7> [300.609154] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:419]
<7> [300.609226] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:420]
<7> [300.609338] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:421]
<7> [300.609440] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:422]
<7> [300.609682] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:423]
<7> [300.613011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [300.613175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [300.719444] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]
<7> [300.738833] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [300.738936] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [300.769800] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [300.777775] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [300.836327] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [300.837408] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [300.870444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [300.871082] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [300.871725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [300.910188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [300.910899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [300.929304] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:423] from all active usage due to RMFB ioctl
<7> [300.929417] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:423] is removed
<7> [300.929532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0
<7> [300.930117] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [300.930725] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.931273] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.931797] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [300.932389] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [300.932948] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0
<7> [300.947756] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:414]
<7> [300.948089] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:423]
<7> [300.948461] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:426]
<7> [300.948763] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:427]
<7> [300.964309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [300.964638] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [300.964922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [301.375945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [301.376123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [301.460281] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [301.460380] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [301.460609] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016
<7> [301.461245] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [301.461789] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0
<7> [301.462366] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0
<7> [301.462893] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0
<7> [301.463527] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 559716 num active planes 1
<7> [301.464177] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560
<7> [301.464791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [301.490020] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [301.496653] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [301.557405] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [301.558266] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [301.592252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [301.592899] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [301.593541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [301.631066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [301.631772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [301.649598] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [301.649696] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [301.668915] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [301.705296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [301.705969] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [301.706608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [301.745183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [301.745814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [301.763479] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [301.763581] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [301.782686] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [301.818287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [301.818936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [301.819578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [301.858791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [301.859477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [301.877436] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [301.877530] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [301.896568] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [301.932560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [301.933237] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [301.933854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [301.972690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [301.973381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [301.991983] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:427] from all active usage due to RMFB ioctl
<7> [301.992125] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:427] is removed
<7> [301.992245] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0
<7> [301.992833] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [301.993425] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.993971] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.994552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [301.995157] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [301.995712] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0
<7> [302.011063] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.105194] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [302.105284] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:HDMI-A-1]
<7> [302.105502] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016
<7> [302.106150] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [302.106707] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0
<7> [302.107278] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0
<7> [302.107843] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0
<7> [302.108468] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 559716 num active planes 1
<7> [302.109091] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560
<7> [302.109694] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [302.112098] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1
<7> [302.112236] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]
<7> [302.135386] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [302.141776] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [302.202554] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.203423] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [302.219549] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.220328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.220961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.221888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.223556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.224238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.255240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.255896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.256575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.295410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.296077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.316425] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.350095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.350739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.351361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.390164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.390795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.408875] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:423]
<7> [302.418768] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.427289] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [302.440465] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.525294] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.559126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.559796] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.560459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.598827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.599542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.617673] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.622632] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.636083] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [302.648286] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.673126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.673765] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.674409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.712634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.713321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.733929] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.767013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.767663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.768294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [302.807700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [302.808396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [302.826496] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.831029] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [302.844752] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [302.858267] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.942754] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [302.976043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [302.976687] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [302.977359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [303.016277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [303.016948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [303.035113] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [303.040937] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<7> [303.053368] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [303.071226] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [303.170242] i915 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [i915]] Re-arming FIFO underruns on pipe A
<7> [303.203989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [303.204637] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [303.205298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [303.243874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [303.244511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<6> [303.264008] [IGT] kms_frontbuffer_tracking: finished subtest fbc-1p-primscrn-indfb-pgflip-blt, SUCCESS
<7> [303.265570] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:418] from all active usage due to RMFB ioctl
<7> [303.265734] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:418] is removed
<7> [303.265897] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0
<7> [303.266490] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [303.267084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [303.267622] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [303.268257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [303.268918] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [303.269536] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0
<7> [303.280883] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]
<6> [303.302136] [IGT] kms_frontbuffer_tracking: exiting, ret=0
<7> [303.303856] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [303.318974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [303.319603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [303.320237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [303.340181] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016
<7> [303.340744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm
<7> [303.341367] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0
<7> [303.342237] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0
<7> [303.343078] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0
<7> [303.343989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 559716 num active planes 1
<7> [303.344842] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560
<7> [303.345519] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1
<7> [303.347430] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [303.348338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [303.349459] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1
<7> [303.350361] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]
<7> [303.356918] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [303.376161] Console: switching to colour frame buffer device 240x67
Created at 2026-03-06 22:34:10