igt@kms_pm_rpm@universal-planes-dpms@plane-164 on shard-tglu@CI_DRM

Detail	Value
Duration	8.39 seconds
Hostname	shard-tglu-8
Igt-Version	IGT-Version: 2.3-gc807f7fde (x86_64) (Linux: 7.0.0-rc1-CI_DRM_18019-gcec43d5c2696+ x86_64)
Out	Starting dynamic subtest: plane-164 Dynamic subtest plane-164: SUCCESS (8.395s) Subtest universal-planes-dpms: SUCCESS (66.580s)
Err	Starting dynamic subtest: plane-164 Dynamic subtest plane-164: SUCCESS (8.395s) Subtest universal-planes-dpms: SUCCESS (66.580s)
Dmesg	<6> [154.784187] [IGT] kms_pm_rpm: starting dynamic subtest plane-164 <7> [154.784263] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:170:pipe A] <7> [154.784497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [154.785019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [154.785446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [154.785887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [154.786294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [154.786765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [154.787194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [154.787648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [154.788074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [154.788510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [154.788990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [154.789397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [154.789819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [154.790218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [154.790653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [154.791079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [154.791355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [154.791512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [154.791681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [154.791838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [154.791993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [154.792149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [154.792305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [154.792459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [154.792627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [154.792784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [154.792941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [154.793098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [154.793256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [154.793412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [154.793591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [154.793749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [154.793907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [154.794063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [154.794220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [154.794377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [154.794538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [154.794733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [154.794891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [154.795047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in avi infoframe <7> [154.795204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [154.795361] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [154.795363] i915 0000:00:02.0: colorspace: RGB <7> [154.795365] i915 0000:00:02.0: scan mode: Underscan <7> [154.795366] i915 0000:00:02.0: colorimetry: No Data <7> [154.795368] i915 0000:00:02.0: picture aspect: No Data <7> [154.795370] i915 0000:00:02.0: active aspect: Same as Picture <7> [154.795371] i915 0000:00:02.0: itc: No Data <7> [154.795373] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [154.795375] i915 0000:00:02.0: quantization range: Full <7> [154.795376] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [154.795378] i915 0000:00:02.0: video code: 0 <7> [154.795379] i915 0000:00:02.0: ycc quantization range: Full <7> [154.795381] i915 0000:00:02.0: hdmi content type: Graphics <7> [154.795383] i915 0000:00:02.0: pixel repeat: 0 <7> [154.795384] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [154.795386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [154.795553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in spd infoframe <7> [154.795749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [154.795907] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [154.795909] i915 0000:00:02.0: vendor: Intel <7> [154.795910] i915 0000:00:02.0: product: Integrated gfx <7> [154.795912] i915 0000:00:02.0: source device information: PC General (0x9) <7> [154.795914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [154.796078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hdmi infoframe <7> [154.796257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [154.796413] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [154.796415] i915 0000:00:02.0: empty frame <7> [154.796417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [154.796592] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [154.796784] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0 <7> [154.797036] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 192000 kHz -> 0 kHz <7> [154.797201] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [154.797361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [154.797543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: no [modeset] <7> [154.797755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [154.797939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [154.798120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [154.798301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [154.798482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [154.798685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no <7> [154.798894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no <7> [154.799075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no <7> [154.810606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [154.813556] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [154.813743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [154.813933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [154.814220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.814433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [154.814684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [154.814918] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [154.815080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [154.815364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [154.816121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.816284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.826322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [154.826459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [154.826668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [154.827368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.828567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B] <7> [154.828755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1] <7> [154.828914] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A] <7> [154.829073] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B] <7> [154.829231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C] <7> [154.829387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D] <7> [154.829571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2] <7> [154.829747] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A] <7> [154.829901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B] <7> [154.830055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C] <7> [154.830209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D] <7> [154.830363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3] <7> [154.830552] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A] <7> [154.830736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B] <7> [154.830890] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C] <7> [154.831043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D] <7> [154.831196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4] <7> [154.831351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A] <7> [154.831505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B] <7> [154.831680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C] <7> [154.831863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D] <7> [154.832016] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1] <7> [154.832335] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A] <7> [154.832890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [154.837852] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:308:pipe B] <7> [154.859745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [154.859756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [154.859760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [154.859764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [154.859768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [154.859772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [154.859775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [154.859779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [154.860207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [154.860376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [154.860923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [154.861099] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [154.861139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [154.861322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [154.861496] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [154.861815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [154.861995] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.862157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [154.863330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [154.863498] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [154.863699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [154.863864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [154.865684] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [154.872340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [154.874476] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [154.875641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [154.877758] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [154.878924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [154.881051] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [154.882345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [154.883231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [154.884494] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:446:pipe C] <7> [154.884657] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:584:pipe D] <7> [154.902745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [154.902949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [154.903107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [155.887775] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [155.887708] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [155.887803] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [155.888398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [155.889098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [155.889822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [155.890624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [155.890546] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [155.896963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [155.898147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [155.898433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [155.898708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [155.898877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [155.901665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [155.987741] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:648] <7> [155.987938] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:651] <7> [155.988597] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:170:pipe A] <7> [155.988707] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:587:HDMI-A-1] <7> [155.988899] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [155.989372] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [155.989863] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [155.990308] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A] <7> [155.990757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [155.991227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [155.991721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [155.992194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [155.992662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [155.993114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [155.993549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [155.994023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [155.994465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [155.994991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [155.995429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [155.995895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [155.996327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [155.996791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [155.997225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [155.997714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [155.998144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [155.998539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [155.998977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [155.999374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [155.999797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [156.000205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [156.000646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [156.001076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [156.001501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [156.001987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [156.002385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [156.002821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [156.003262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [156.003680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [156.004077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [156.004475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [156.004846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [156.005130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [156.005413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [156.005730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [156.006016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [156.006298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [156.006579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [156.006895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [156.007180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in avi infoframe <7> [156.007461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [156.007690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [156.007893] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [156.007896] i915 0000:00:02.0: colorspace: RGB <7> [156.007898] i915 0000:00:02.0: scan mode: Underscan <7> [156.007900] i915 0000:00:02.0: colorimetry: No Data <7> [156.007902] i915 0000:00:02.0: picture aspect: No Data <7> [156.007903] i915 0000:00:02.0: active aspect: Same as Picture <7> [156.007905] i915 0000:00:02.0: itc: No Data <7> [156.007907] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [156.007909] i915 0000:00:02.0: quantization range: Full <7> [156.007911] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [156.007913] i915 0000:00:02.0: video code: 0 <7> [156.007915] i915 0000:00:02.0: ycc quantization range: Full <7> [156.007917] i915 0000:00:02.0: hdmi content type: Graphics <7> [156.007919] i915 0000:00:02.0: pixel repeat: 0 <7> [156.007921] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [156.007923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in spd infoframe <7> [156.008125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [156.008327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [156.008530] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [156.008533] i915 0000:00:02.0: vendor: Intel <7> [156.008535] i915 0000:00:02.0: product: Integrated gfx <7> [156.008537] i915 0000:00:02.0: source device information: PC General (0x9) <7> [156.008539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hdmi infoframe <7> [156.008760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [156.008963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [156.009180] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [156.009184] i915 0000:00:02.0: empty frame <7> [156.009188] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [156.009441] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [156.009666] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [156.009920] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [156.010127] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [156.010329] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [156.010531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [156.010751] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [156.010905] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [156.011084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 1142000 num active planes 1 <7> [156.011248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [156.011408] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [156.011583] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 0 kHz -> 192000 kHz <7> [156.011779] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 17844 kHz <7> [156.011963] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [156.012119] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [156.012275] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [156.012432] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0 <7> [156.012595] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0 <7> [156.012779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset] <7> [156.012941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [156.013100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [156.013257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [156.013414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [156.013570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [156.013749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [156.013907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [156.014064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [156.014219] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [156.014221] i915 0000:00:02.0: colorspace: RGB <7> [156.014223] i915 0000:00:02.0: scan mode: Underscan <7> [156.014224] i915 0000:00:02.0: colorimetry: No Data <7> [156.014226] i915 0000:00:02.0: picture aspect: No Data <7> [156.014227] i915 0000:00:02.0: active aspect: Same as Picture <7> [156.014229] i915 0000:00:02.0: itc: No Data <7> [156.014230] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [156.014232] i915 0000:00:02.0: quantization range: Full <7> [156.014233] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [156.014234] i915 0000:00:02.0: video code: 0 <7> [156.014236] i915 0000:00:02.0: ycc quantization range: Full <7> [156.014237] i915 0000:00:02.0: hdmi content type: Graphics <7> [156.014239] i915 0000:00:02.0: pixel repeat: 0 <7> [156.014240] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [156.014242] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [156.014244] i915 0000:00:02.0: vendor: Intel <7> [156.014245] i915 0000:00:02.0: product: Integrated gfx <7> [156.014247] i915 0000:00:02.0: source device information: PC General (0x9) <7> [156.014248] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [156.014250] i915 0000:00:02.0: empty frame <7> [156.014251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [156.014408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [156.014564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [156.014736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [156.014892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [156.015046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [156.015202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [156.015357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [156.015512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [156.015682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [156.015838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [156.015992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [156.016148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [156.016325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [156.016481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [156.016658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [156.016816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [156.016971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [156.017126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [156.017280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [156.017436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [156.017591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [156.017770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [156.017926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.018080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.018235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.018390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [156.018544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [156.018714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.018869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.019023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.019177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [156.019331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [156.019484] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:633] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [156.019648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [156.019802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [156.019978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [156.020132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [156.020285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [156.020440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [156.020594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no <7> [156.020767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no <7> [156.020922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no <7> [156.032729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [156.036695] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [156.036878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [156.037070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [156.037358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.037572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [156.037813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [156.038029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [156.038189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [156.038438] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.039199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.039360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [156.049400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [156.049593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [156.049815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [156.050496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [156.051709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [156.051875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [156.052051] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [156.052296] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B] <7> [156.052458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1] <7> [156.052629] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A] <7> [156.052787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B] <7> [156.052943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C] <7> [156.053101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D] <7> [156.053259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2] <7> [156.053415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A] <7> [156.053572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B] <7> [156.053750] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C] <7> [156.053911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D] <7> [156.054068] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3] <7> [156.054223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A] <7> [156.054380] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B] <7> [156.054534] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C] <7> [156.054710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D] <7> [156.054865] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4] <7> [156.055020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A] <7> [156.055174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B] <7> [156.055328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C] <7> [156.055481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D] <7> [156.055769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [156.056020] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:170:pipe A] <7> [156.056183] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [156.056405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [156.056653] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [156.057366] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [156.057929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [156.058078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [156.058597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [156.058771] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6 <7> [156.058787] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [156.061637] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [156.061804] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [156.067415] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Enable audio codec on [CRTC:170:pipe A], 64 bytes ELD <7> [156.075742] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [156.075962] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [156.076194] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [156.076421] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [156.076425] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [156.076428] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [156.076431] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [156.076634] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1] <7> [156.077038] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A] <7> [156.078419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [156.105330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [156.105345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [156.105349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [156.105352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [156.105355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [156.105358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [156.105362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [156.105365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [156.105818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [156.105995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [156.106520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [156.106687] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [156.106720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [156.106927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [156.107130] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [156.107412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [156.107605] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [156.107878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [156.108066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [156.108389] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [156.112844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [156.113278] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.113549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [156.113891] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.114291] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [156.114472] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [156.114655] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 <7> [156.114828] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 <7> [156.115236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [156.115662] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [156.116029] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [156.116204] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [156.116364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [156.116531] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A] <7> [156.116735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [156.116907] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [156.117067] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0 <7> [156.117260] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [156.117416] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [156.117719] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [156.117887] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [156.118042] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [156.118204] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A] <7> [156.118354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [156.118519] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [156.118792] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0 <7> [156.118977] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [156.119134] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [156.119376] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [156.119543] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [156.119797] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [156.119957] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A] <7> [156.120110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [156.120271] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [156.120433] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0 <7> [156.120613] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [156.120896] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [156.121081] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [156.121236] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [156.121392] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [156.121546] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.121715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.121881] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.122036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [156.122189] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.122341] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.122501] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [156.122697] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0 <7> [156.122867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0 <7> [156.123060] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 0 kHz <7> [156.123248] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [156.123411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 172800 kHz <7> [156.123568] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [156.123743] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0 <7> [156.123926] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0 <7> [156.124094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset] <7> [156.124259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [156.124420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [156.124579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [156.124753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [156.124924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [156.125081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [156.125239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [156.125397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [156.125554] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [156.125557] i915 0000:00:02.0: colorspace: RGB <7> [156.125558] i915 0000:00:02.0: scan mode: Underscan <7> [156.125560] i915 0000:00:02.0: colorimetry: No Data <7> [156.125561] i915 0000:00:02.0: picture aspect: No Data <7> [156.125563] i915 0000:00:02.0: active aspect: Same as Picture <7> [156.125564] i915 0000:00:02.0: itc: No Data <7> [156.125566] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [156.125567] i915 0000:00:02.0: quantization range: Full <7> [156.125568] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [156.125570] i915 0000:00:02.0: video code: 0 <7> [156.125571] i915 0000:00:02.0: ycc quantization range: Full <7> [156.125573] i915 0000:00:02.0: hdmi content type: Graphics <7> [156.125574] i915 0000:00:02.0: pixel repeat: 0 <7> [156.125576] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [156.125578] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [156.125579] i915 0000:00:02.0: vendor: Intel <7> [156.125581] i915 0000:00:02.0: product: Integrated gfx <7> [156.125582] i915 0000:00:02.0: source device information: PC General (0x9) <7> [156.125584] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [156.125586] i915 0000:00:02.0: empty frame <7> [156.125587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [156.125762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [156.125944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [156.126102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [156.126259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [156.126414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [156.126571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [156.126771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [156.126931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [156.127089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [156.127247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [156.127404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [156.127562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [156.127744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [156.127915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [156.128072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [156.128229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [156.128386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [156.128543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [156.128713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [156.128883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [156.129039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [156.129195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [156.129351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.129506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.129675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.129843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [156.129998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [156.130153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.130310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.130466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [156.130630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [156.130804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [156.130967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:633] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [156.131129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [156.131288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [156.131445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [156.131602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [156.131802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [156.131969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no <7> [156.132126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no <7> [156.132282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [FB:648] 64x64 format = AR24 little-endian (0x34325241) modifier = 0x0, visible: no <7> [156.132439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [156.132745] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Disable audio codec on [CRTC:170:pipe A] <7> [156.142515] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [156.144603] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [156.149227] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [156.149266] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [156.153688] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [156.154248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [156.154397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [156.154943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [156.155113] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6 <7> [156.155129] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [156.155317] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [156.159709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [156.159917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:170:pipe A] <7> [156.160107] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [156.160279] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [156.160448] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [156.160687] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B] <7> [156.160849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1] <7> [156.161008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A] <7> [156.161165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B] <7> [156.161321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C] <7> [156.161478] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D] <7> [156.161650] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2] <7> [156.161806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A] <7> [156.161960] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B] <7> [156.162115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C] <7> [156.162270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D] <7> [156.162437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3] <7> [156.162659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A] <7> [156.162874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B] <7> [156.163091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C] <7> [156.163316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D] <7> [156.163535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4] <7> [156.163768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A] <7> [156.163992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B] <7> [156.164215] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C] <7> [156.164430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D] <7> [156.164885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [156.165189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [156.165439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [156.165687] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1] <7> [156.165981] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A] <7> [156.271998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [156.272543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [156.273108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.167915] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [157.167966] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [157.168029] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [157.168600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [157.169176] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [157.169666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [157.170211] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [157.170238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [157.175682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.176785] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [157.177053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [157.177309] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [157.177473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [157.180752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [157.281908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [157.288794] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [157.289280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [157.289808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [157.290400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.290972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [157.291472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [157.292048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [157.292488] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [157.293095] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [157.294518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.294680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.304741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [157.304932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [157.305100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [157.305795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [157.307093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [157.324780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [157.326587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [157.326933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [157.333931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [157.333944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [157.333947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [157.333950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [157.333954] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [157.333957] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [157.333960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [157.333964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [157.334413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [157.334565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [157.335096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [157.335254] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [157.335285] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [157.335445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [157.336412] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [157.337564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [157.337744] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [157.337928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [157.338096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [157.339919] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [157.346564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [157.348728] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [157.349878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [157.352040] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [157.353175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [157.355341] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [158.384019] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [158.384085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [158.384169] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [158.384734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [158.385543] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [158.386283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [158.387080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [158.387062] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [158.392416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.393524] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [158.393823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [158.394091] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [158.394239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [158.396777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [158.423959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [158.429856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [158.430339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [158.430850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [158.431421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.431974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [158.432507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [158.433078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [158.433519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [158.434086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [158.435905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.436064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.447125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [158.447265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [158.447428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [158.448236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [158.449500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [158.467879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [158.469778] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [158.470060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [158.476287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [158.476298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [158.476301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [158.476304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [158.476307] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [158.476310] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [158.476313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [158.476317] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [158.476712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [158.476885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [158.477406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [158.477556] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [158.477585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [158.477745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [158.478459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [158.479599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [158.479826] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [158.480040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [158.480232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [158.482085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [158.488712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [158.490868] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [158.492024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [158.494165] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [158.495317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [158.497507] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [159.536067] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [159.536208] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [159.536137] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [159.536744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [159.537548] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [159.538062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [159.538588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [159.538567] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [159.544177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.545322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [159.545586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [159.545857] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [159.546023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [159.548852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [159.669047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [159.674984] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [159.675173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [159.675363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [159.675653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.676139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [159.676638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [159.677217] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [159.677678] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [159.678296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [159.680242] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.680549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.690588] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [159.690814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [159.691013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [159.691734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [159.692958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [159.711369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [159.714720] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [159.716126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [159.721687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [159.721705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [159.721710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [159.721715] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [159.721720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [159.721725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [159.721730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [159.721736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [159.722140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [159.722495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [159.723174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [159.723399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [159.723449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [159.723687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [159.723890] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [159.725000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [159.725253] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [159.725530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [159.725770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [159.727678] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [159.734303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [159.736491] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [159.737622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [159.739749] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [159.740946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [159.743087] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.752204] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [160.752168] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [160.752168] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [160.752768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [160.753505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [160.754260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [160.755053] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [160.755029] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [160.760377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [160.761487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [160.761748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [160.762021] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [160.762185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [160.765930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [160.808097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [160.814026] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [160.814508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [160.815032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [160.815673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [160.816227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [160.816784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [160.817358] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [160.817875] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [160.818490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [160.819932] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [160.820114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [160.830154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [160.830306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [160.830457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [160.831171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [160.832483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [160.850164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [160.859437] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [160.859608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [160.860816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [160.860829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [160.860833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [160.860836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [160.860839] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [160.860842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [160.860846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [160.860849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [160.861251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [160.861443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [160.862029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [160.862189] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [160.862219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [160.862387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [160.863020] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [160.864184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [160.864376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [160.864583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [160.864777] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [160.865616] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [160.872187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [160.874331] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.875482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [160.877626] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [160.878778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [160.880928] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [161.904290] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [161.904233] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [161.904326] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [161.904875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [161.905582] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [161.906260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [161.906955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [161.906934] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [161.913356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [161.914557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [161.914819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [161.915092] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [161.915256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [161.918999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [161.948151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [161.953010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [161.953456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [161.953908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [161.954540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [161.955300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [161.956033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [161.956769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [161.957284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [161.957809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [161.959391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [161.959557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [161.969612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [161.969851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [161.970101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [161.970822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [161.972108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [161.990056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [161.991860] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [161.992172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [161.998894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [161.998907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [161.998910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [161.998913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [161.998917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [161.998920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [161.998923] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [161.998927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [161.999371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [161.999521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [162.000062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [162.000214] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [162.000242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [162.000402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [162.001417] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [162.002581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [162.002756] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [162.002944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [162.003145] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [162.003949] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [162.010525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [162.012647] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [162.013814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [162.015940] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [162.017110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <7> [162.019233] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [163.056342] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [163.056343] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [163.056432] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [163.057003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [163.057622] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [163.058117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [163.058681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [163.058620] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7> [163.067263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [163.068396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [163.068668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [163.068927] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [163.069105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [163.071078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [163.179931] [IGT] kms_pm_rpm: finished subtest plane-164, SUCCESS <6> [163.181401] [IGT] kms_pm_rpm: finished subtest universal-planes-dpms, SUCCESS <7> [163.183346] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:633] from all active usage due to RMFB ioctl <7> [163.183907] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:633] is removed <7> [163.196309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [163.201233] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [163.201690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [163.202172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [163.202732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.203284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [163.203777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [163.204422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [163.204853] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [163.205417] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [163.207430] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [163.207838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [163.221373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [163.221754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [163.221916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [163.222718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [163.224309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1] <7> [163.242113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [163.243993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [163.244255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [163.251138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [163.251151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [163.251155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink. <7> [163.251158] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [163.251161] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [163.251164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS <7> [163.251167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [163.251171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10 <7> [163.251598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [163.251848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [163.252366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [163.252522] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [163.252553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1] <7> [163.252723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [163.253596] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [163.254768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [163.254942] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [163.255135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [163.255305] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [163.257111] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7> [163.264031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2] <7> [163.265908] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [163.267074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3] <7> [163.269200] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [163.270489] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [163.270877] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [163.271116] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [163.271356] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A] <7> [163.271586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [163.271825] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset <7> [163.272071] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0 <7> [163.272365] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [163.272597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [163.272832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [163.273067] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [163.273297] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,*twm, swm, stwm <7> [163.273528] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [163.273757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [163.273981] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [163.274275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 1142000 num active planes 1 <7> [163.274514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142 <7> [163.274747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [163.275050] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 17844 kHz <7> [163.275288] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [163.275525] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [163.275758] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [163.275988] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0 <7> [163.276253] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0 <7> [163.276498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset] <7> [163.276733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [163.276968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [163.277227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [163.277459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [163.277695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [163.277927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [163.278175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [163.278404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [163.278632] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [163.278637] i915 0000:00:02.0: colorspace: RGB <7> [163.278640] i915 0000:00:02.0: scan mode: Underscan <7> [163.278643] i915 0000:00:02.0: colorimetry: No Data <7> [163.278647] i915 0000:00:02.0: picture aspect: No Data <7> [163.278650] i915 0000:00:02.0: active aspect: Same as Picture <7> [163.278654] i915 0000:00:02.0: itc: No Data <7> [163.278657] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [163.278660] i915 0000:00:02.0: quantization range: Full <7> [163.278664] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [163.278667] i915 0000:00:02.0: video code: 0 <7> [163.278670] i915 0000:00:02.0: ycc quantization range: Full <7> [163.278674] i915 0000:00:02.0: hdmi content type: Graphics <7> [163.278677] i915 0000:00:02.0: pixel repeat: 0 <7> [163.278680] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [163.278684] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [163.278688] i915 0000:00:02.0: vendor: Intel <7> [163.278691] i915 0000:00:02.0: product: Integrated gfx <7> [163.278695] i915 0000:00:02.0: source device information: PC General (0x9) <7> [163.278698] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [163.278702] i915 0000:00:02.0: empty frame <7> [163.278705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [163.278934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [163.279183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [163.279412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [163.279639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [163.279864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [163.280103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0 <7> [163.280331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144 <7> [163.280561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [163.280788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [163.281016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [163.281276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [163.281509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [163.281743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [163.281979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000 <7> [163.282240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [163.282472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [163.282700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [163.282926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [163.283176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [163.283412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [163.283641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [163.283868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [163.284108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.284335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.284562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.284792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [163.285021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [163.285280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.285510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.285739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [163.285969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [163.286219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [163.286447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:634] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [163.286675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [163.286899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [163.287145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [163.287380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [163.287605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [163.287832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [163.288070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no <7> [163.288295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no <7> [163.288523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no <7> [163.288976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [163.289764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [163.291040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [163.291281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [163.291533] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [163.292052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B] <7> [163.292287] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1] <7> [163.292521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A] <7> [163.292749] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B] <7> [163.292975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C] <7> [163.293234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D] <7> [163.293459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2] <7> [163.293686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A] <7> [163.293913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B] <7> [163.294163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C] <7> [163.294389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D] <7> [163.294619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3] <7> [163.294844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A] <7> [163.295080] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B] <7> [163.295256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C] <7> [163.295416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D] <7> [163.295579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4] <7> [163.295738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A] <7> [163.295896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B] <7> [163.296065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C] <7> [163.296221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D] <7> [163.296523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [163.296780] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:170:pipe A] <7> [163.296945] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [163.297510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [163.297764] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [163.298499] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [163.299080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [163.299231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [163.299750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [163.299905] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6 <7> [163.299920] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [163.302056] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [163.302221] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [163.308573] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Enable audio codec on [CRTC:170:pipe A], 64 bytes ELD <7> [163.316939] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [163.317152] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [163.317316] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [163.317481] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [163.317484] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [163.317485] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [163.317487] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [163.317639] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1] <7> [163.317904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A] <7> [163.319405] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [163.319854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4] <6> [163.320321] [IGT] kms_pm_rpm: exiting, ret=0 <7> [163.320301] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <6> [163.325385] Console: switching to colour frame buffer device 240x67

<6> [154.784187] [IGT] kms_pm_rpm: starting dynamic subtest plane-164

<7> [154.784263] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:170:pipe A]

<7> [154.784497] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [154.785019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [154.785446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [154.785887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [154.786294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [154.786765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [154.787194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [154.787648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [154.788074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [154.788510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [154.788990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [154.789397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [154.789819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [154.790218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [154.790653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [154.791079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [154.791355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [154.791512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [154.791681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [154.791838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [154.791993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [154.792149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [154.792305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [154.792459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [154.792627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [154.792784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [154.792941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [154.793098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [154.793256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [154.793412] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [154.793591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [154.793749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [154.793907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [154.794063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [154.794220] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [154.794377] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [154.794538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [154.794733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [154.794891] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [154.795047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in avi infoframe

<7> [154.795204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [154.795361] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [154.795376] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [154.795384] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [154.795386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [154.795553] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in spd infoframe

<7> [154.795749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [154.795907] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [154.795912] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [154.795914] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [154.796078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hdmi infoframe

<7> [154.796257] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [154.796413] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [154.796417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [154.796592] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [154.796784] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0

<7> [154.797036] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 192000 kHz -> 0 kHz

<7> [154.797201] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [154.797361] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [154.797543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: no [modeset]

<7> [154.797755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [154.797939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [154.798120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [154.798301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [154.798482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [154.798685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no

<7> [154.798894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no

<7> [154.799075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no

<7> [154.810606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [154.813556] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [154.813743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [154.813933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [154.814220] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.814433] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [154.814684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [154.814918] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [154.815080] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [154.815364] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [154.816121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.816284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.826322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [154.826459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [154.826668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [154.827368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.828567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B]

<7> [154.828755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1]

<7> [154.828914] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A]

<7> [154.829073] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B]

<7> [154.829231] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C]

<7> [154.829387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D]

<7> [154.829571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2]

<7> [154.829747] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A]

<7> [154.829901] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B]

<7> [154.830055] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C]

<7> [154.830209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D]

<7> [154.830363] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3]

<7> [154.830552] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A]

<7> [154.830736] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B]

<7> [154.830890] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C]

<7> [154.831043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D]

<7> [154.831196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4]

<7> [154.831351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A]

<7> [154.831505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B]

<7> [154.831680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C]

<7> [154.831863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D]

<7> [154.832016] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [154.832335] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]

<7> [154.832890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [154.837852] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:308:pipe B]

<7> [154.859745] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [154.859756] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [154.859760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [154.859764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [154.859768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [154.859772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [154.859775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [154.859779] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [154.860207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [154.860376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [154.860923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [154.861099] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [154.861139] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [154.861322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [154.861496] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [154.861815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [154.861995] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.862157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [154.863330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [154.863498] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [154.863699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [154.863864] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [154.865684] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [154.872340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [154.874476] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [154.875641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [154.877758] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [154.878924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [154.881051] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [154.882345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [154.883231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [154.884494] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:446:pipe C]

<7> [154.884657] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:584:pipe D]

<7> [154.902745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [154.902949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [154.903107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [155.887775] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [155.887708] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [155.887803] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [155.888398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [155.889098] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [155.889822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [155.890624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [155.890546] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [155.896963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [155.898147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [155.898433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [155.898708] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [155.898877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [155.901665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [155.988597] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:170:pipe A]

<7> [155.988707] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:587:HDMI-A-1]

<7> [155.988899] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [155.989372] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [155.989863] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [155.990308] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A]

<7> [155.990757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [155.991227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [155.991721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [155.992194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [155.992662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [155.993114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [155.993549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [155.994023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [155.994465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [155.994991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [155.995429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [155.995895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [155.996327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [155.996791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [155.997225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [155.997714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [155.998144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [155.998539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [155.998977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [155.999374] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [155.999797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [156.000205] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [156.000646] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [156.001076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [156.001501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [156.001987] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [156.002385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [156.002821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [156.003262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [156.003680] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [156.004077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [156.004475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [156.004846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [156.005130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [156.005413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [156.005730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [156.006016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [156.006298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [156.006579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [156.006895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [156.007180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in avi infoframe

<7> [156.007461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [156.007690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [156.007893] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [156.007911] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [156.007921] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [156.007923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in spd infoframe

<7> [156.008125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [156.008327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [156.008530] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [156.008537] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [156.008539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hdmi infoframe

<7> [156.008760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [156.008963] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [156.009180] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [156.009188] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [156.009441] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [156.009666] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [156.009920] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [156.010127] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [156.010329] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [156.010531] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [156.010751] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [156.010905] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [156.011084] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 1142000 num active planes 1

<7> [156.011248] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [156.011408] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [156.011583] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:170:pipe A] min cdclk: 0 kHz -> 192000 kHz

<7> [156.011779] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 17844 kHz

<7> [156.011963] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [156.012119] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [156.012275] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [156.012432] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0

<7> [156.012595] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0

<7> [156.012779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset]

<7> [156.012941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [156.013100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [156.013257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [156.013414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [156.013570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [156.013749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [156.013907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [156.014064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [156.014219] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [156.014233] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [156.014240] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [156.014242] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [156.014247] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [156.014248] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [156.014251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [156.014408] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [156.014564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [156.014736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [156.014892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [156.015046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [156.015202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [156.015357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [156.015512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [156.015682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [156.015838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [156.015992] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [156.016148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [156.016325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [156.016481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [156.016658] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [156.016816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [156.016971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [156.017126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [156.017280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [156.017436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [156.017591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [156.017770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [156.017926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.018080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.018235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.018390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [156.018544] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [156.018714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.018869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.019023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.019177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [156.019331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [156.019484] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:633] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [156.019648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [156.019802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [156.019978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [156.020132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [156.020285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [156.020440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [156.020594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no

<7> [156.020767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no

<7> [156.020922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no

<7> [156.032729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [156.036695] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [156.036878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [156.037070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [156.037358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.037572] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [156.037813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [156.038029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [156.038189] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [156.038438] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.039199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.039360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [156.049400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [156.049593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [156.049815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [156.050496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [156.051709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [156.051875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [156.052051] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [156.052296] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B]

<7> [156.052458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1]

<7> [156.052629] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A]

<7> [156.052787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B]

<7> [156.052943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C]

<7> [156.053101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D]

<7> [156.053259] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2]

<7> [156.053415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A]

<7> [156.053572] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B]

<7> [156.053750] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C]

<7> [156.053911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D]

<7> [156.054068] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3]

<7> [156.054223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A]

<7> [156.054380] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B]

<7> [156.054534] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C]

<7> [156.054710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D]

<7> [156.054865] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4]

<7> [156.055020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A]

<7> [156.055174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B]

<7> [156.055328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C]

<7> [156.055481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D]

<7> [156.055769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [156.056020] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:170:pipe A]

<7> [156.056183] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [156.056405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [156.056653] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [156.057366] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [156.057929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [156.058078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [156.058597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [156.058771] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6

<7> [156.058787] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [156.061637] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [156.061804] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [156.067415] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Enable audio codec on [CRTC:170:pipe A], 64 bytes ELD

<7> [156.075742] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [156.075962] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [156.076194] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [156.076421] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [156.076425] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [156.076428] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [156.076431] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [156.076634] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [156.077038] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]

<7> [156.078419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [156.105330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [156.105345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [156.105349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [156.105352] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [156.105355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [156.105358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [156.105362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [156.105365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [156.105818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [156.105995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [156.106520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [156.106687] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [156.106720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [156.106927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [156.107130] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [156.107412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [156.107605] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [156.107878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [156.108066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [156.108389] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [156.112844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [156.113278] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [156.113549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [156.113891] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [156.114291] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [156.114472] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [156.114655] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0

<7> [156.114828] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0

<7> [156.115236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [156.115662] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [156.116029] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [156.116204] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [156.116364] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [156.116531] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A]

<7> [156.116735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [156.116907] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [156.117067] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0

<7> [156.117260] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [156.117416] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [156.117719] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [156.117887] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [156.118042] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [156.118204] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A]

<7> [156.118354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [156.118519] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [156.118792] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0

<7> [156.118977] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [156.119134] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [156.119376] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [156.119543] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [156.119797] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [156.119957] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A]

<7> [156.120110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [156.120271] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [156.120433] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0

<7> [156.120613] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [156.120896] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [156.121081] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [156.121236] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [156.121392] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [156.121546] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.121715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.121881] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.122036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [156.122189] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] lines 4, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.122341] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] blocks 9, 17, 17, 17, 17, 23, 33, 33, 23, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.122501] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:164:cursor A] min_ddb 11, 20, 20, 20, 20, 27, 38, 38, 24, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [156.122697] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 0 num active planes 0

<7> [156.122867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 0

<7> [156.123060] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 17844 kHz -> 0 kHz

<7> [156.123248] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [156.123411] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 172800 kHz

<7> [156.123568] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [156.123743] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0

<7> [156.123926] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0

<7> [156.124094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset]

<7> [156.124259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [156.124420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [156.124579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [156.124753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [156.124924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [156.125081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [156.125239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [156.125397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [156.125554] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [156.125568] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [156.125576] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [156.125578] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [156.125582] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [156.125584] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [156.125587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [156.125762] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [156.125944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [156.126102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [156.126259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [156.126414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [156.126571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [156.126771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [156.126931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [156.127089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [156.127247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [156.127404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [156.127562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [156.127744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [156.127915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [156.128072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [156.128229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [156.128386] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [156.128543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [156.128713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [156.128883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [156.129039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [156.129195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [156.129351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.129506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.129675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.129843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [156.129998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [156.130153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.130310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.130466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [156.130630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [156.130804] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [156.130967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:633] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [156.131129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [156.131288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [156.131445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [156.131602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [156.131802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [156.131969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no

<7> [156.132126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no

<7> [156.132282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [FB:648] 64x64 format = AR24 little-endian (0x34325241) modifier = 0x0, visible: no

<7> [156.132439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [156.132745] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Disable audio codec on [CRTC:170:pipe A]

<7> [156.142515] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [156.144603] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [156.149227] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [156.149266] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [156.153688] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [156.154248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [156.154397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [156.154943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [156.155113] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6

<7> [156.155129] i915 0000:00:02.0: [drm:intel_ddi_disable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [156.155317] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [156.159709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [156.159917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:170:pipe A]

<7> [156.160107] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [156.160279] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [156.160448] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [156.160687] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B]

<7> [156.160849] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1]

<7> [156.161008] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A]

<7> [156.161165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B]

<7> [156.161321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C]

<7> [156.161478] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D]

<7> [156.161650] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2]

<7> [156.161806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A]

<7> [156.161960] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B]

<7> [156.162115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C]

<7> [156.162270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D]

<7> [156.162437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3]

<7> [156.162659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A]

<7> [156.162874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B]

<7> [156.163091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C]

<7> [156.163316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D]

<7> [156.163535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4]

<7> [156.163768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A]

<7> [156.163992] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B]

<7> [156.164215] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C]

<7> [156.164430] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D]

<7> [156.164885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [156.165189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [156.165439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [156.165687] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [156.165981] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]

<7> [156.271998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [156.272543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [156.273108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.167915] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [157.167966] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [157.168029] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [157.168600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [157.169176] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [157.169666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [157.170211] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [157.170238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [157.175682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.176785] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [157.177053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [157.177309] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [157.177473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [157.180752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [157.281908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [157.288794] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [157.289280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [157.289808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [157.290400] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.290972] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [157.291472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [157.292048] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [157.292488] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [157.293095] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [157.294518] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.294680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.304741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [157.304932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [157.305100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [157.305795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [157.307093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [157.324780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [157.326587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [157.326933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [157.333931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [157.333944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [157.333947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [157.333950] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [157.333954] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [157.333957] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [157.333960] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [157.333964] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [157.334413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [157.334565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [157.335096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [157.335254] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [157.335285] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [157.335445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [157.336412] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [157.337564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [157.337744] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [157.337928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [157.338096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [157.339919] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [157.346564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [157.348728] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [157.349878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [157.352040] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [157.353175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [157.355341] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [158.384019] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [158.384085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [158.384169] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [158.384734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [158.385543] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [158.386283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [158.387080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [158.387062] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [158.392416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.393524] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [158.393823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [158.394091] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [158.394239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [158.396777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [158.423959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [158.429856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [158.430339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [158.430850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [158.431421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.431974] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [158.432507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [158.433078] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [158.433519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [158.434086] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [158.435905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.436064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.447125] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [158.447265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [158.447428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [158.448236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [158.449500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [158.467879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [158.469778] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [158.470060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [158.476287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [158.476298] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [158.476301] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [158.476304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [158.476307] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [158.476310] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [158.476313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [158.476317] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [158.476712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [158.476885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [158.477406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [158.477556] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [158.477585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [158.477745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [158.478459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [158.479599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [158.479826] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [158.480040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [158.480232] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [158.482085] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [158.488712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [158.490868] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [158.492024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [158.494165] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [158.495317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [158.497507] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [159.536067] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [159.536208] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [159.536137] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [159.536744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [159.537548] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [159.538062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [159.538588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [159.538567] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [159.544177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.545322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [159.545586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [159.545857] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [159.546023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [159.548852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [159.669047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [159.674984] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [159.675173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [159.675363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [159.675653] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.676139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [159.676638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [159.677217] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [159.677678] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [159.678296] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [159.680242] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.680549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.690588] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [159.690814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [159.691013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [159.691734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [159.692958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [159.711369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [159.714720] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [159.716126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [159.721687] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [159.721705] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [159.721710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [159.721715] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [159.721720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [159.721725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [159.721730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [159.721736] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [159.722140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [159.722495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [159.723174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [159.723399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [159.723449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [159.723687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [159.723890] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [159.725000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [159.725253] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [159.725530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [159.725770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [159.727678] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [159.734303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [159.736491] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [159.737622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [159.739749] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [159.740946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [159.743087] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [160.752204] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [160.752168] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [160.752168] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [160.752768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [160.753505] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [160.754260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [160.755053] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [160.755029] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [160.760377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [160.761487] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [160.761748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [160.762021] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [160.762185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [160.765930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [160.808097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [160.814026] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [160.814508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [160.815032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [160.815673] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [160.816227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [160.816784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [160.817358] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [160.817875] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [160.818490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [160.819932] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [160.820114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [160.830154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [160.830306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [160.830457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [160.831171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [160.832483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [160.850164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [160.859437] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [160.859608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [160.860816] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [160.860829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [160.860833] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [160.860836] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [160.860839] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [160.860842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [160.860846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [160.860849] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [160.861251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [160.861443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [160.862029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [160.862189] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [160.862219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [160.862387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [160.863020] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [160.864184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [160.864376] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [160.864583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [160.864777] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [160.865616] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [160.872187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [160.874331] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [160.875482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [160.877626] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [160.878778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [160.880928] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [161.904290] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [161.904233] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [161.904326] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [161.904875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [161.905582] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [161.906260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [161.906955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [161.906934] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [161.913356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [161.914557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [161.914819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [161.915092] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [161.915256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [161.918999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [161.948151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [161.953010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [161.953456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [161.953908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [161.954540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [161.955300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [161.956033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [161.956769] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [161.957284] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [161.957809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [161.959391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [161.959557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [161.969612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [161.969851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [161.970101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [161.970822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [161.972108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [161.990056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [161.991860] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [161.992172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [161.998894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [161.998907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [161.998910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [161.998913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [161.998917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [161.998920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [161.998923] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [161.998927] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [161.999371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [161.999521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [162.000062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [162.000214] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [162.000242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [162.000402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [162.001417] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [162.002581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [162.002756] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [162.002944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [162.003145] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [162.003949] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [162.010525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [162.012647] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [162.013814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [162.015940] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [162.017110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [162.019233] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [163.056342] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [163.056343] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [163.056432] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [163.057003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [163.057622] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [163.058117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [163.058681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [163.058620] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4

<7> [163.067263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [163.068396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [163.068668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [163.068927] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [163.069105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [163.071078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [163.179931] [IGT] kms_pm_rpm: finished subtest plane-164, SUCCESS

<6> [163.181401] [IGT] kms_pm_rpm: finished subtest universal-planes-dpms, SUCCESS

<7> [163.183346] i915 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:633] from all active usage due to RMFB ioctl

<7> [163.183907] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:633] is removed

<7> [163.196309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [163.201233] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [163.201690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [163.202172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [163.202732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.203284] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [163.203777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [163.204422] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [163.204853] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [163.205417] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [163.207430] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [163.207838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [163.221373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [163.221754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [163.221916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [163.222718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [163.224309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [163.242113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [163.243993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [163.244255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [163.251138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [163.251151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [163.251155] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] No deep color support on this HDMI sink.

<7> [163.251158] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [163.251161] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [163.251164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [163.251167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [163.251171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:587:HDMI-A-1] ELD size 64, SAD count 10

<7> [163.251598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [163.251848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [163.252366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [163.252522] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [163.252553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:597:DP-1]

<7> [163.252723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [163.253596] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [163.254768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [163.254942] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [163.255135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [163.255305] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [163.257111] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4

<7> [163.264031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:607:DP-2]

<7> [163.265908] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [163.267074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:616:DP-3]

<7> [163.269200] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [163.270489] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:587:HDMI-A-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [163.270877] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [163.271116] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [163.271356] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:586:DDI B/PHY B] [CRTC:170:pipe A]

<7> [163.271586] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:170:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [163.271825] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:170:pipe A] fastset requirement not met, forcing full modeset

<7> [163.272071] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:170:pipe A] releasing DPLL 0

<7> [163.272365] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [163.272597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:170:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [163.272832] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [163.273067] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:164:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [163.273297] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [163.273528] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [163.273757] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [163.273981] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [163.274275] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:170:pipe A] data rate 1142000 num active planes 1

<7> [163.274514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 14993 required 1142

<7> [163.274747] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [163.275050] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 17844 kHz

<7> [163.275288] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [163.275525] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [163.275758] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [163.275988] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:170:pipe A] allocated DPLL 0

<7> [163.276253] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:170:pipe A] reserving DPLL 0

<7> [163.276498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:170:pipe A] enable: yes [modeset]

<7> [163.276733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [163.276968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [163.277227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [163.277459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [163.277695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [163.277927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [163.278175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [163.278404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [163.278632] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [163.278664] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [163.278680] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [163.278684] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [163.278695] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [163.278698] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [163.278705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [163.278934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [163.279183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [163.279412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [163.279639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [163.279864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [163.280103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1144, vmax: 1144, flipline: 1144, pipeline full: 61, guardband: 63 vsync start: 0, vsync end: 0

<7> [163.280331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1144, vmax vtotal: 1144

<7> [163.280561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [163.280788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [163.281016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [163.281276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [163.281509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [163.281743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [163.281979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500, min cdclk 192000

<7> [163.282240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [163.282472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [163.282700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [163.282926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [163.283176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [163.283412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [163.283641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [163.283868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [163.284108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.284335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.284562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.284792] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [163.285021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [163.285280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.285510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.285739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [163.285969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [163.286219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [163.286447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:634] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [163.286675] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [163.286899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [163.287145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [163.287380] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [163.287605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [163.287832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [163.288070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:plane 6A] fb: [NOFB], visible: no

<7> [163.288295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:154:plane 7A] fb: [NOFB], visible: no

<7> [163.288523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:164:cursor A] fb: [NOFB], visible: no

<7> [163.288976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [163.289764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [163.291040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [163.291281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [163.291533] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [163.292052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:586:DDI B/PHY B]

<7> [163.292287] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:596:DDI TC1/PHY TC1]

<7> [163.292521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:598:DP-MST A]

<7> [163.292749] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:599:DP-MST B]

<7> [163.292975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:600:DP-MST C]

<7> [163.293234] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:601:DP-MST D]

<7> [163.293459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:606:DDI TC2/PHY TC2]

<7> [163.293686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:608:DP-MST A]

<7> [163.293913] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:609:DP-MST B]

<7> [163.294163] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:610:DP-MST C]

<7> [163.294389] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:611:DP-MST D]

<7> [163.294619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:615:DDI TC3/PHY TC3]

<7> [163.294844] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:617:DP-MST A]

<7> [163.295080] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:618:DP-MST B]

<7> [163.295256] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:619:DP-MST C]

<7> [163.295416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:620:DP-MST D]

<7> [163.295579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:624:DDI TC4/PHY TC4]

<7> [163.295738] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:626:DP-MST A]

<7> [163.295896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:627:DP-MST B]

<7> [163.296065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:628:DP-MST C]

<7> [163.296221] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:629:DP-MST D]

<7> [163.296523] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [163.296780] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:170:pipe A]

<7> [163.296945] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [163.297510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [163.297764] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [163.298499] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:587:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [163.299080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [163.299231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [163.299750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [163.299905] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:587:HDMI-A-1] Failed to read TMDS config: -6

<7> [163.299920] i915 0000:00:02.0: [drm:intel_ddi_enable [i915]] [CONNECTOR:587:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [163.302056] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [163.302221] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [163.308573] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:587:HDMI-A-1][ENCODER:586:DDI B/PHY B] Enable audio codec on [CRTC:170:pipe A], 64 bytes ELD

<7> [163.316939] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [163.317152] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [163.317316] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [163.317481] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [163.317484] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [163.317485] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [163.317487] snd_hda_codec_intelhdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [163.317639] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:587:HDMI-A-1]

<7> [163.317904] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:170:pipe A]

<7> [163.319405] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [163.319854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:625:DP-4]

<7> [163.320301] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<6> [163.325385] Console: switching to colour frame buffer device 240x67

Results for igt@kms_pm_rpm@universal-planes-dpms@plane-164