Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g30ecfbf68 (x86_64) (Linux: 6.19.0-CI_DRM_18004-g7ee0795cb4f3+ x86_64)
Out 
Using IGT_SRANDOM=1771431205 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.030s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.030s)
Dmesg
<6> [260.490009] Console: switching to colour dummy device 80x25
<6> [260.490972] [IGT] kms_force_connector_basic: executing
<7> [260.692001] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [260.692913] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [260.693526] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [260.694425] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [260.694438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.694449] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.694739] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.695001] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.695490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.695751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.696170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.696433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.696441] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.696699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.698038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.698047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.698343] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.698644] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.698717] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.698725] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.698993] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.699363] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.699784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.700039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.700471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.700729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.700736] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.700994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.702314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.702322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.702582] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.702841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.702940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.702947] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.703273] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.703551] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.703994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.704425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.704998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.705444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.705455] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.705851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.707584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.707595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.707975] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.708426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [260.709686] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [260.710487] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [260.710503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.710516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [260.710568] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [260.710697] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [260.710937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.711409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.711999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.712441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.712466] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.712874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.714725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.714749] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.715314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [260.715328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [260.715340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [260.715351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [260.715362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [260.715373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [260.715466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.715713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.716145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.716732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.717201] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.717225] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.717637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.719401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.719424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.719942] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [260.719953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [260.719964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [260.719974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [260.719984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [260.719994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [260.720503] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [260.720554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.720639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [260.720647] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [260.720923] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [260.720941] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [260.720957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [260.720966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [260.720976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [260.720986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [260.720996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [260.721006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [260.721016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [260.721402] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [260.721459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.721531] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [260.721539] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [260.721547] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 56
<7> [260.721807] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [260.721824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [260.721833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [260.721842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [260.721852] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [260.721862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [260.721871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [260.722158] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [260.722218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.722428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.722827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.723415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.723804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.723825] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.724247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.725943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.725962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.726612] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [260.726633] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [260.726650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [260.726660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [260.726670] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [260.726680] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [260.726690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [260.726699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [260.727183] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing
<7> [260.727197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.727209] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.727623] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.728002] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.728724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.729151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.729690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.730091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.730102] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.730500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.732279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.732290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.732668] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.733058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [260.733092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.733112] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [260.733250] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [260.733273] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 58
<7> [260.733413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.733425] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.733857] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.734296] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.734922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.735377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.735985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.736445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.736457] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.736864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.738617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.738632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.739062] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.739528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [260.740898] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [260.741905] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [260.743152] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:72:LVDS-1] force updated from 0 to 0 or reprobing
<7> [260.743171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [260.743191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [260.743202] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [260.743341] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [260.743352] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [260.743419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [260.743434] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [260.743443] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [260.743557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [260.743567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [260.743842] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:LVDS-1] EDID override reset
<7> [260.743890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [260.743904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [260.743912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [260.744027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [260.744036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [260.744529] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [260.744542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.744554] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.745013] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.745479] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.746244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.746694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.747371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.747775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.747786] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.748239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.750001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.750012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.750462] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.750875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.750977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.750989] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.751422] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.751816] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.752469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.752841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.753434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.753813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.753822] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.754282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.755958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.755969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.756422] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.756846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.757185] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [260.757244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [260.757255] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [260.757646] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [260.758025] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [260.758652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.759045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [260.759634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [260.760037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.760047] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.760481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [260.762179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [260.762190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [260.762564] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [260.762941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [260.763487] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [260.763500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [260.763513] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [260.815724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [260.832150] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [260.832161] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.832420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [260.848133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [260.848142] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [260.848401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [260.848484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [260.848492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [260.900141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [260.916123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [260.916135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [260.916393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [260.932113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [260.932122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [260.932380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [260.932608] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [260.932640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [260.932647] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [260.984597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [261.000136] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.000151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.000503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.016147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.016166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.016462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [261.016708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [261.016740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [261.016748] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [261.021041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [261.021553] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:92:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [261.021568] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [261.021579] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [261.022172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.022570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.023101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.023494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.023504] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.023868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.025667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.025678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.026114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [261.026207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [261.026220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [261.026781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.027224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.027785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.028237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.028247] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.028633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.030320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.030331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.030713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [261.031009] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:92:HDMI-A-2] EDID override reset
<7> [261.031109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [261.031121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [261.031694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.032130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.032684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.033133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.033144] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.033573] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.035262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.035273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.035656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [261.036231] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:96:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [261.036246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [261.036258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [261.036828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.037257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.037813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.038270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.038281] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.038666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.040438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.040450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.040860] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [261.040949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [261.040961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [261.041588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.041990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.042574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.042962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.042972] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.043414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.045134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.045146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.045553] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [261.045866] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:96:HDMI-A-3] EDID override reset
<7> [261.045918] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [261.045929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [261.046552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.046929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.047529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.047908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.047918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.048336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.050035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.050052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.050550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [261.050912] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:DP-2] EDID override reset
<7> [261.050965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [261.050976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [261.055446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [261.055668] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:DP-3] EDID override reset
<7> [261.055700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [261.055708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [261.060016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<6> [261.061523] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [261.062134] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [261.069638] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [261.069671] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [261.069921] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [261.069961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [261.069980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [261.070967] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [261.070990] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [261.071014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [261.071034] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [261.072086] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.072388] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.072809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.073091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.073543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.073800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.073808] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.074113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.075576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.075584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.075844] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.076155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [261.076169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [261.076179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [261.128137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [261.144114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.144127] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.144411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.160148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.160162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.160459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [261.160470] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [261.160478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [261.164771] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [261.164792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [261.164804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [261.165477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.165770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.166199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.166613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.166624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.167023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.168868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.168879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.169319] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [261.169334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [261.169346] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [261.169934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.170250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.170688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.171109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.171120] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.171506] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.173310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.173322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.173708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [261.173722] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [261.173733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [261.178231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [261.178249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [261.178261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [261.182709] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<7> [261.182727] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] enabled? yes
<7> [261.182739] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:76:VGA-1] enabled? no
<7> [261.182747] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:79:HDMI-A-1] enabled? no
<7> [261.182755] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:DP-1] enabled? no
<7> [261.182763] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:92:HDMI-A-2] enabled? no
<7> [261.182770] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:96:HDMI-A-3] enabled? no
<7> [261.182778] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:100:DP-2] enabled? no
<7> [261.182785] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:104:DP-3] enabled? no
<7> [261.182839] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [261.182888] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] found preferred mode: 1366x768
<7> [261.182903] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [261.182959] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:52:pipe A] desired mode 1366x768 set (0,0)
<7> [261.185981] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [261.203302] Console: switching to colour frame buffer device 170x48
Created at 2026-02-18 18:03:52