Results for igt@kms_pm_rpm@basic-rte

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 2.94 seconds
Igt-Version
IGT-Version: 2.3-g028b10060 (x86_64) (Linux: 6.19.0-CI_DRM_18001-gd9e4e8f5c4e7+ x86_64)
Out
Using IGT_SRANDOM=1771376998 for randomisation
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 1
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff8881320cd820 has 1/1 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x60/0x130 [i915]
     i915_display_rpm_get_raw+0x17/0x30 [i915]
     intel_display_rpm_get_raw+0x20/0x30 [i915]
     __intel_display_power_put_async+0x3a/0x1c0 [i915]
     intel_atomic_commit_tail+0x140b/0x1d70 [i915]
     intel_atomic_commit+0x2e8/0x330 [i915]
     drm_atomic_commit+0xaf/0xf0
     drm_atomic_helper_set_config+0x82/0xd0
     drm_mode_setcrtc+0x407/0xa10
     drm_ioctl_kernel+0xb3/0x120
     drm_ioctl+0x2d4/0x5a0
     __x64_sys_ioctl+0xa5/0x100
     x64_sys_call+0x1243/0x26b0
     do_syscall_64+0x93/0x1470
     entry_SYSCALL_64_after_hwframe+0x76/0x7e
Subtest basic-rte: SUCCESS (2.944s)
i915_runtime_pm_status:
GPU idle: yes
IRQs disabled: no
Usage count: 3
PCI device power state: D0 [0]
ref_tracker: intel_runtime_pm@ffff8881320cd820 has 1/3 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x60/0x130 [i915]
     i915_display_rpm_get_raw+0x17/0x30 [i915]
     intel_display_rpm_get_raw+0x20/0x30 [i915]
     __intel_display_power_put_async+0x3a/0x1c0 [i915]
     intel_atomic_commit_tail+0x140b/0x1d70 [i915]
     intel_atomic_commit+0x2e8/0x330 [i915]
     drm_atomic_commit+0xaf/0xf0
     drm_atomic_helper_set_config+0x82/0xd0
     drm_mode_setcrtc+0x407/0xa10
     drm_ioctl_kernel+0xb3/0x120
     drm_ioctl+0x2d4/0x5a0
     __x64_sys_ioctl+0xa5/0x100
     x64_sys_call+0x1243/0x26b0
     do_syscall_64+0x93/0x1470
     entry_SYSCALL_64_after_hwframe+0x76/0x7e

ref_tracker: intel_runtime_pm@ffff8881320cd820 has 2/3 users at
     track_intel_runtime_pm_wakeref+0x90/0xb0 [i915]
     __intel_runtime_pm_get+0x60/0x130 [i915]
     i915_display_rpm_get+0x1a/0x30 [i915]
     intel_display_rpm_get+0x1f/0x30 [i915]
     intel_display_power_get+0x22/0x70 [i915]
     adlp_tc_phy_connect+0x166/0x2b0 [i915]
     intel_tc_port_reset_mode+0x285/0x3b0 [i915]
     __intel_tc_port_lock+0xe3/0x130 [i915]
     intel_tc_port_lock+0x1a/0x30 [i915]
     intel_digital_port_connected+0x33/0xa0 [i915]
     intel_dp_detect+0xfc/0x810 [i915]
     detect_connector_status+0x21/0x60
     drm_helper_probe_detect_ctx+0x75/0xe0
     drm_helper_probe_detect+0x7b/0x90
     intel_hotplug_detect_connector+0x4b/0x140 [i915]
     i915_hpd_poll_init_work+0x20b/0x2e0 [i915]
Err
Starting subtest: basic-rte
Subtest basic-rte: SUCCESS (2.944s)
Dmesg
<6> [209.916848] Console: switching to colour dummy device 80x25
<6> [209.917424] [IGT] kms_pm_rpm: executing
<6> [209.920496] [IGT] kms_pm_rpm: starting subtest basic-rte
<7> [209.920781] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [209.927239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1]
<7> [209.927253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<7> [209.931562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected
<7> [209.931927] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1]
<7> [209.931934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [209.932287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected
<7> [209.932659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2]
<7> [209.932666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [209.933000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected
<7> [209.933461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1]
<7> [209.933468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:389:eDP-1]
<7> [209.934075] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [209.934514] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [209.934711] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [209.934921] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [209.935153] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [209.935162] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [209.935166] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD monitor
<7> [209.935170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD size 20, SAD count 0
<7> [209.935192] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] VRR capable: no
<7> [209.935388] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [209.935583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [209.936368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1] probed modes:
<7> [209.936376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [209.936381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [209.936414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1]
<7> [209.936420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<7> [209.940694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected
<7> [209.940721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1]
<7> [209.940726] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [209.941068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected
<7> [209.941088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2]
<7> [209.941093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [209.941580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected
<7> [209.941636] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1]
<7> [209.941645] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:389:eDP-1]
<7> [209.942469] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [209.943001] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [209.943336] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [209.943664] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [209.944046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [209.944057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [209.944064] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD monitor
<7> [209.944069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD size 20, SAD count 0
<7> [209.944100] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] VRR capable: no
<7> [209.944422] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [209.944702] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:389:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [209.945677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1] probed modes:
<7> [209.945689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [209.945698] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [209.945804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1]
<7> [209.945813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<7> [209.950296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected
<7> [209.950355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1]
<7> [209.950360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [209.950682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected
<7> [209.950744] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2]
<7> [209.950749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [209.951060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected
<7> [209.951670] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:423]
<7> [210.985036] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [210.985424] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [210.986402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [210.987249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [210.987992] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [210.988689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [210.989078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [210.989291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [210.989496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [210.989702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [210.989919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [210.990131] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [210.990336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [210.990542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [210.990748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [210.990957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [210.991171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [210.991375] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [210.991580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [210.991786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [210.992023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [210.992066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [210.992237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [210.992308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [210.992446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [210.992538] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [210.992656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [210.992749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [210.992866] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [210.992992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [210.993093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [210.993222] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [210.993306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [210.993515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [210.993718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [210.993935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [210.994150] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [210.994354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [210.994557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [210.994768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [210.994988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [210.995204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [210.995413] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [210.995623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [210.995837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [210.996056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [210.996270] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [210.996495] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0
<7> [210.996810] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [210.997043] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [210.997273] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [210.997475] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [210.997670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [210.997858] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [210.998060] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [210.998260] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [210.998470] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [210.998677] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [210.998886] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [210.999095] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [210.999295] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [210.999501] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [210.999709] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [210.999942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [211.000171] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [211.000412] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [211.000655] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [211.000868] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [211.001088] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [211.001312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]
<7> [211.001532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no
<7> [211.001756] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [211.001989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [211.002212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [211.002420] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [211.002622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [211.002932] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [211.003765] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [211.208088] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:389:eDP-1] set backlight PWM = 0
<7> [211.209211] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [211.221591] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power off
<7> [211.222408] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [211.223143] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - short
<7> [211.223981] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [211.224614] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [211.278944] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [211.278944] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [211.279859] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - long
<7> [211.280036] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [211.280224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [211.280644] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [211.281151] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]
<7> [211.281404] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [211.281968] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [211.282646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [211.283392] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [211.284112] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [211.284452] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI A/PHY A]
<7> [211.284670] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI B/PHY B]
<7> [211.284863] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DDI TC1/PHY TC1]
<7> [211.285079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:408:DP-MST A]
<7> [211.285293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST B]
<7> [211.285501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST C]
<7> [211.285715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:415:DDI TC2/PHY TC2]
<7> [211.285946] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:417:DP-MST A]
<7> [211.286172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST B]
<7> [211.286383] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST C]
<7> [211.286576] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:eDP-1]
<7> [211.286950] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [211.287172] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [211.287363] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [211.287646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [211.287924] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [211.288511] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [211.288734] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [211.306122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [211.306998] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [211.307745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [211.308777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [211.310865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [211.312295] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [211.313563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [211.314557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [211.316053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [211.316693] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [211.317195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [211.317766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [211.390557] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [211.403112] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [211.403672] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [211.404483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [211.405337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [211.406106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [211.406789] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [211.407444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [211.408092] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [211.408613] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [211.409481] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [211.414313] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [211.414773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [211.419563] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [211.420431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [211.420830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [211.421274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [211.421967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [211.423002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<7> [211.423698] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [211.427595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [211.428018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [211.428357] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [211.428653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [211.429439] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [211.430608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [211.431198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [211.431994] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [211.432637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [211.433058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [211.433309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [211.433607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [211.434270] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [212.464299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [212.465435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [212.466659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [212.467908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [212.468696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [212.469425] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [212.469694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [212.470232] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [212.470226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [212.470742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [212.471340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [212.471567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [212.471781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [212.472011] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [212.472220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [212.472741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [212.472968] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [212.473012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [212.473864] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [212.475173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [212.476167] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [212.476846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [212.477506] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [212.478009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [212.478535] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [212.536744] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [212.537014] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:eDP-1]
<7> [212.537423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:389:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [212.538441] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:388:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [212.539175] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000
<7> [212.539819] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [212.540480] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:388:DDI A/PHY A] [CRTC:150:pipe A]
<7> [212.541044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [212.541624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [212.541940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [212.542167] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [212.542383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [212.542590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [212.542797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [212.543026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [212.543255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [212.543477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [212.543695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [212.543920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [212.544145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [212.544363] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [212.544593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [212.544833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [212.545085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [212.545318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [212.545547] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [212.545760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [212.545989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [212.546222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [212.546452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [212.546685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [212.546934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [212.547175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [212.547394] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [212.547605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [212.547830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [212.548076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [212.548308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [212.548526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [212.548736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [212.548956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [212.549178] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [212.549402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [212.549636] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [212.549983] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [212.550203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [212.550436] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [212.550625] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [212.550819] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [212.551042] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [212.551257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [212.551465] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [212.551702] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2154400 num active planes 1
<7> [212.551936] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [212.552161] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [212.552382] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [212.552619] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [212.552858] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [212.553108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [212.553335] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [212.553551] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [212.553806] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [212.554085] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [212.554311] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [212.554524] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [212.554745] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0
<7> [212.554962] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0
<7> [212.555197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]
<7> [212.555422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [212.555667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [212.555927] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [212.556170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [212.556392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [212.556597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [212.556809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [212.557052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [212.557286] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [212.557502] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [212.557718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [212.557936] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [212.558157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [212.558381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [212.558615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [212.558858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [212.559105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [212.559342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [212.559551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [212.559784] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [212.560033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [212.560267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [212.560488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [212.560708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [212.560923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [212.561149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [212.561371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [212.561606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [212.561851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [212.562109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600, min cdclk 269300
<7> [212.562343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [212.562553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [212.562785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [212.563034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [212.563269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [212.563488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [212.563701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [212.563914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [212.564133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.564352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.564586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.564822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [212.565070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [212.565312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.565522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.565735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [212.565978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [212.566210] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [212.566432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:423] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [212.566657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [212.566862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [212.567084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [212.567312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [212.567539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [212.567770] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [212.568018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [212.580054] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [212.580250] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [212.580436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [212.580636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [212.580902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [212.581202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [212.581572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [212.582128] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [212.582387] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [212.582654] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [212.585285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [212.585518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [212.589209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [212.589782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [212.591743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [212.593554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [212.593974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [212.594598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [212.594857] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [212.595164] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [212.595578] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI A/PHY A]
<7> [212.596012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI B/PHY B]
<7> [212.596413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DDI TC1/PHY TC1]
<7> [212.596807] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:408:DP-MST A]
<7> [212.597241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST B]
<7> [212.597627] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST C]
<7> [212.597885] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:415:DDI TC2/PHY TC2]
<7> [212.598226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:417:DP-MST A]
<7> [212.598625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST B]
<7> [212.599058] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST C]
<7> [212.599671] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [212.599984] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [212.600326] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [212.600793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [212.601265] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]
<7> [212.601697] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [212.602059] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power on
<7> [212.602303] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [212.602584] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [212.612968] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [212.613313] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power on
<7> [212.613596] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [212.675631] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [212.676500] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - long
<7> [212.677214] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [212.677990] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [212.828740] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [212.829806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [212.831135] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turning VDD on
<7> [212.832069] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [212.834689] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [212.834724] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [212.835301] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [212.836192] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [212.836451] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [212.837313] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Clock recovery OK
<7> [212.837496] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [212.838782] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [212.839240] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [212.840214] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [212.841097] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [212.841513] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [212.841960] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:389:eDP-1] Performing OUI wait (0 ms)
<7> [212.842789] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:389:eDP-1] set backlight PWM = 6844
<7> [212.858009] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [212.860916] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:eDP-1]
<7> [212.861828] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [212.864216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<6> [212.865967] [IGT] kms_pm_rpm: finished subtest basic-rte, SUCCESS
<7> [212.866357] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]
<7> [212.868952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [212.869717] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [212.870455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [212.871317] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [212.872315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [212.872847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [212.873391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [212.873923] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [212.874493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7843931/8388608 link 522928/524288, found tu 0, data 0/0 link 0/0)
<7> [212.875025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [212.875526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [212.876055] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)
<7> [212.876566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)
<7> [212.877079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)
<7> [212.877593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)
<7> [212.878102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)
<7> [212.878603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)
<7> [212.879136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2160, found 0)
<7> [212.879652] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 2161, found 0)
<7> [212.880161] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2163, found 0)
<7> [212.880648] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2168, found 0)
<7> [212.881149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2244, found 0)
<7> [212.881656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2244, found 0)
<7> [212.882189] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)
<7> [212.882693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)
<7> [212.883195] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)
<7> [212.883693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)
<7> [212.884217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)
<7> [212.884731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)
<7> [212.885241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2160, found 0)
<7> [212.885735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 2161, found 0)
<7> [212.886223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2163, found 0)
<7> [212.886739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2168, found 0)
<7> [212.887259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2244, found 0)
<7> [212.887760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2244, found 0)
<7> [212.888270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [212.888765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [212.889256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [212.889772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [212.890301] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 538600, found 0)
<7> [212.890805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 538600, found 0)
<7> [212.891256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)
<7> [212.891738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [212.892265] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [212.892771] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0
<7> [212.893397] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [212.893850] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [212.894399] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4027) -> ( 0 - 0), size 4027 -> 0
<7> [212.894861] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (4027 - 4096) -> ( 0 - 0), size 69 -> 0
<7> [212.895343] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [212.895796] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [212.896256] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [212.896680] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [212.897057] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0
<7> [212.897534] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 0
<7> [212.898022] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 0
<7> [212.898487] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 0
<7> [212.898950] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 0
<7> [212.899327] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 0
<7> [212.899793] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 0
<7> [212.900282] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 0
<7> [212.900755] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 269300 kHz -> 0 kHz
<7> [212.901236] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 33663 kHz -> 0 kHz
<7> [212.901647] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [212.902140] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 179200 kHz, actual 179200 kHz
<7> [212.902615] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [212.903108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]
<7> [212.903555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no
<7> [212.903759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [212.904065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [212.904539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [212.905029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [212.905497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [212.906080] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2
<7> [212.927140] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]
<7> [213.136164] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:389:eDP-1] set backlight PWM = 0
<7> [213.137197] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [213.143508] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power off
<7> [213.143843] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000
<7> [213.144108] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [213.144386] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - short
<7> [213.144649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [213.199394] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [213.200292] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - long
<7> [213.201033] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [213.205985] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [213.206510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A
<7> [213.207087] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [213.207088] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]
<7> [213.207593] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [213.207665] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0
<7> [213.208377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [213.208977] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [213.209575] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=448
<7> [213.210101] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI A/PHY A]
<7> [213.210649] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI B/PHY B]
<7> [213.211172] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DDI TC1/PHY TC1]
<7> [213.211644] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:408:DP-MST A]
<7> [213.212122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST B]
<7> [213.212590] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST C]
<7> [213.213087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:415:DDI TC2/PHY TC2]
<7> [213.213579] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:417:DP-MST A]
<7> [213.214073] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST B]
<7> [213.214548] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST C]
<7> [213.215049] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:eDP-1]
<7> [213.215895] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [213.216365] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)
<7> [213.216797] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [213.217429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A
<7> [213.218057] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [213.219223] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [213.219659] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]
<7> [213.238040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [213.238837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [213.239625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [213.872313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [213.873442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [213.874651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [213.875647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [213.876506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [213.877255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [213.877642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [213.878175] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [213.936248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [213.937378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [213.938474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [213.939308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [213.940002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [213.940622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [213.941244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [213.942112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [213.942639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [213.942624] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [213.943399] i915 0000:00:02.0: [drm:intel_uc_runtime_suspend [i915]] GT0: GUC: communication disabled
<7> [213.944038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [213.944613] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0
<7> [213.945000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1
<7> [213.945329] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9
<7> [213.945547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08
<7> [213.946045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [214.031426] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:389:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [214.032117] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:388:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 538600 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [214.032599] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 HDR no link rate required 2019750 available 2160000
<7> [214.033113] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [214.033398] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:388:DDI A/PHY A] [CRTC:150:pipe A]
<7> [214.033605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [214.033840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [214.034085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [214.034310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [214.034532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [214.034738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [214.034953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)
<7> [214.035186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)
<7> [214.035410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)
<7> [214.035633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)
<7> [214.035874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)
<7> [214.036108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)
<7> [214.036334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2160)
<7> [214.036549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 2161)
<7> [214.036756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2163)
<7> [214.037013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2168)
<7> [214.037248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2244)
<7> [214.037473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2244)
<7> [214.037695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
<7> [214.037932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)
<7> [214.038163] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
<7> [214.038376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
<7> [214.038610] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
<7> [214.038850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
<7> [214.039098] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
<7> [214.039333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 2161)
<7> [214.039550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
<7> [214.039758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
<7> [214.040154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2244)
<7> [214.040389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2244)
<7> [214.040606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [214.040825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [214.041216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [214.041441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [214.041659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)
<7> [214.041903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [214.042137] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [214.042456] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [214.042663] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [214.042874] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4027), size 0 -> 4027
<7> [214.043084] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4027 - 4096), size 0 -> 69
<7> [214.043293] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [214.043514] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 12, 14, 20, 20, 0, 0, 0, 6, 0
<7> [214.043735] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 31, 249, 373, 435, 621, 621, 0, 0, 45, 187, 201
<7> [214.043984] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 36, 275, 412, 480, 685, 685, 0, 0, 46, 207, 207
<7> [214.044245] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2154400 num active planes 1
<7> [214.044481] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 10928 required 2263
<7> [214.044724] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 15758 required 2263
<7> [214.044973] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 16388 required 2263
<7> [214.045205] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 17250 required 2263
<7> [214.045430] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 0: max bw 34133 required 2263
<7> [214.045655] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 1: max bw 40533 required 2263
<7> [214.045871] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] PSF GV point 2: max bw 51200 required 2263
<7> [214.046105] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 269300 kHz
<7> [214.046367] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 33663 kHz
<7> [214.046610] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change
<7> [214.046849] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz
<7> [214.047139] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
<7> [214.047377] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0
<7> [214.047595] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0
<7> [214.047843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]
<7> [214.048100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [214.048333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [214.048551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [214.048768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [214.048999] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0
<7> [214.049218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [214.049434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7843931, data_n: 8388608, link_m: 522928, link_n: 524288, tu: 64
<7> [214.049663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [214.049921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: disabled
<7> [214.050155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled
<7> [214.050379] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [214.050592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0
<7> [214.050796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [214.051024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14
<7> [214.051255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB
<7> [214.051482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB
<7> [214.051708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0
<7> [214.051947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range
<7> [214.052180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined
<7> [214.052394] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1
<7> [214.052631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [214.052886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 2244, vmax: 2244, flipline: 2244, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [214.053121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 2162, vmax vblank: 2162, vmin vtotal: 2244, vmax vtotal: 2244
<7> [214.053343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [214.053550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [214.053754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [214.053988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [214.054218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [214.054447] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=538600, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2160 vb=2161-2244 vs=2163-2168 vt=2244, flags=0xa
<7> [214.054684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3840x2160+0+0, pixel rate 538600, min cdclk 269300
<7> [214.054926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 60, ips linetime: 0
<7> [214.055155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [214.055373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [214.055607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [214.055845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0xe001a5, cfgcr1: 0x48, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
<7> [214.056105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [214.056346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [214.056568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [214.056771] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.056995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.057219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.057432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [214.057649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [214.057889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.058123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.058347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [214.058571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [214.058783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [214.059008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:390] 3840x2160 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [214.059238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [214.059468] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3840.000000x2160.000000+0.000000+0.000000 dst: 3840x2160+0+0
<7> [214.059709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [214.059963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [214.060199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [214.060414] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [214.060632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [214.073286] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [214.073459] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9
<7> [214.073646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00
<7> [214.073849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [214.074134] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.074498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))
<7> [214.074938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [214.075586] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [214.075904] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os
<7> [214.076224] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [214.078921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [214.079137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [214.083293] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<7> [214.084900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [214.085343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [214.085921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [214.086419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [214.087197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A
<7> [214.087685] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [214.088076] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768
<7> [214.088581] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:388:DDI A/PHY A]
<7> [214.088789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI B/PHY B]
<7> [214.089140] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:406:DDI TC1/PHY TC1]
<7> [214.089541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:408:DP-MST A]
<7> [214.089947] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:409:DP-MST B]
<7> [214.090338] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:410:DP-MST C]
<7> [214.090713] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:415:DDI TC2/PHY TC2]
<7> [214.091016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:417:DP-MST A]
<7> [214.091404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:418:DP-MST B]
<7> [214.091826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:419:DP-MST C]
<7> [214.092548] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf
<7> [214.093071] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)
<7> [214.093323] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [214.093725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [214.094201] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]
<7> [214.094643] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0
<7> [214.095192] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power on
<7> [214.095584] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)
<7> [214.096082] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [214.105992] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [214.106380] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power on
<7> [214.106710] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [214.168467] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [214.169365] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:388:DDI A/PHY A] - long
<7> [214.170090] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [214.170849] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]
<7> [214.327012] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [214.328125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A
<7> [214.329557] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 turning VDD on
<7> [214.330485] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:388:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [214.333464] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 44 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [214.333505] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [214.334080] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 06
<7> [214.335012] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [214.335281] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [214.336151] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Clock recovery OK
<7> [214.336338] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [214.337588] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [214.337774] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4
<7> [214.338344] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [214.338706] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]
<7> [214.338922] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A
<7> [214.339115] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:389:eDP-1] Performing OUI wait (0 ms)
<7> [214.339583] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:389:eDP-1] set backlight PWM = 6844
<7> [214.355589] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2
<7> [214.358572] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:389:eDP-1]
<7> [214.359502] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]
<7> [214.362391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-1]
<7> [214.362743] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [214.364352] [IGT] kms_pm_rpm: exiting, ret=0
<7> [214.367095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:407:DP-1]
<7> [214.367938] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [214.368648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:416:DP-2]
<7> [214.369384] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<6> [214.389809] Console: switching to colour frame buffer device 240x67
Created at 2026-02-18 04:40:05