Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-ga4e057edb (x86_64) (Linux: 6.19.0-CI_DRM_17996-g32b409741f18+ x86_64)
Out 
Using IGT_SRANDOM=1771322530 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.028s)
Dmesg
<6> [257.557583] Console: switching to colour dummy device 80x25
<6> [257.558610] [IGT] kms_force_connector_basic: executing
<7> [257.796159] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [257.797157] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [257.797985] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [257.799198] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [257.799215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.799228] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.799631] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.800060] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.800656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.801075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.801651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.802068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.802079] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.802472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.804383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.804395] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.804797] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.805194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.805286] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.805298] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.805679] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.806111] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.806703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.807117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.807686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.808100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.808110] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.808497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.810223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.810233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.810606] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.811063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.811234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.811245] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.811630] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.812046] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.812615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.813035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.813578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.813989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.813999] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.814389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.816096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.816107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.816480] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.816898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [257.818212] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [257.819009] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [257.819026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.819038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [257.819072] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [257.819200] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [257.819429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.819895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.820511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.820936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.820961] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.821359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.823224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.823248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.823808] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [257.823822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.823834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.823846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.823857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.823867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.823961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.824178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.824588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.825198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.825606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.825630] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.826060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.827822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.827847] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.828378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [257.828390] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.828400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.828411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.828420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.828430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.828938] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [257.828993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.829088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [257.829097] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [257.829365] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [257.829384] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [257.829400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [257.829409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [257.829419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [257.829429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [257.829439] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.829448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.829458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.829771] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [257.829869] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.829944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [257.829953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [257.829962] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 56
<7> [257.830225] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [257.830243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [257.830251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [257.830261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [257.830271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.830280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.830290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.830544] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [257.830597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.830843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.831264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.831838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.832227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.832248] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.832620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.834360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.834379] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.834903] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [257.834925] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [257.834943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [257.834953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [257.834964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [257.834982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [257.834991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [257.835000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [257.835461] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing
<7> [257.835473] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.835484] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.836089] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.836482] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.837087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.837459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.838083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.838360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.838368] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.838628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.839995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.840004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.840267] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.840525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [257.840549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.840570] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [257.840695] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [257.840721] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 58
<7> [257.840901] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.840914] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.841319] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.841710] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.842318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.842714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.843292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.843697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.843708] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.844132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.845881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.845894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.846301] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.846699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [257.848108] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [257.848998] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [257.850150] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:72:LVDS-1] force updated from 0 to 0 or reprobing
<7> [257.850167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [257.850188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [257.850198] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [257.850328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [257.850338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [257.850407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [257.850421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [257.850429] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [257.850538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [257.850548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [257.850828] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:LVDS-1] EDID override reset
<7> [257.850876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [257.850890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [257.850898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [257.851007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [257.851016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [257.851435] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [257.851447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.851458] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.851931] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.852334] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.852879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.853277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.854016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.854411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.854423] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.854702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.856162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.856172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.856441] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.856702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.856795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.856808] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.857106] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.857363] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.857816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.858092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.858496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.858751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.858758] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.859133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.860448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.860457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.860723] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.861022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.861249] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [257.861283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [257.861291] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [257.861569] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [257.861879] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [257.862345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.862600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [257.863042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [257.863304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.863311] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.863566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [257.864896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [257.864906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [257.865174] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [257.865433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [257.865840] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [257.865854] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [257.865866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [257.917791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [257.933846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.933865] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [257.934127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [257.949823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [257.949832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [257.950088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [257.950174] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [257.950183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [258.001829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [258.017826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.017838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.018095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [258.033824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.033833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [258.034087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [258.034330] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [258.034363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [258.034370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [258.086405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [258.102839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.102853] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.103137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [258.118829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.118838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [258.119096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [258.119338] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [258.119372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [258.119379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [258.123678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [258.124135] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:92:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [258.124145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [258.124153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [258.124596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.124894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [258.125344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.125600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.125607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.125892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [258.127239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.127247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [258.127514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [258.127585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [258.127593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [258.128058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.128315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [258.128720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.129002] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.129011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.129308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [258.130613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.130621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [258.130930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [258.131173] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:92:HDMI-A-2] EDID override reset
<7> [258.131206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [258.131213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [258.131638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.131922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [258.132371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.132626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.132632] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.132930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [258.134251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.134259] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [258.134518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [258.134892] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:96:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [258.134905] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [258.134917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [258.135638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.136135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [258.136711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.137149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.137161] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.137551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [258.139334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.139347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [258.139751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [258.139914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [258.139929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [258.140503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.140930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [258.141492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.141910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.141920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.142305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [258.144015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.144025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [258.144409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [258.144726] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:96:HDMI-A-3] EDID override reset
<7> [258.144829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [258.144842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [258.145422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.145844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [258.146402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.146800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.146810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.147197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [258.148908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.148919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [258.149297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [258.149609] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:DP-2] EDID override reset
<7> [258.149657] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [258.149668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [258.154190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [258.154498] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:DP-3] EDID override reset
<7> [258.154547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [258.154558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [258.159039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<6> [258.161357] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [258.162279] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [258.180396] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [258.180429] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [258.180681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [258.180721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [258.180740] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [258.181028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [258.181039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [258.181052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [258.181064] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [258.181501] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [258.182047] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [258.182647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [258.182975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [258.183386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [258.183642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [258.183650] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.183928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [258.185408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [258.185422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [258.185894] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [258.186363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [258.186383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [258.186395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [258.238372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [258.254820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.254832] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.255118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [258.270832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [258.270841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [258.271097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [258.271109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [258.271116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [258.275391] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [258.275404] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [258.275411] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [258.275844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.276140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [258.276558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [258.276861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.276869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.277276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [258.279238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [258.279252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [258.279549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [258.279561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [258.279569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [258.280086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.280355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [258.280789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [258.281079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.281087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [258.281404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [258.282804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [258.282813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [258.283084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [258.283095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [258.283103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [258.287401] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [258.287422] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [258.287434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [258.291966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<7> [258.291982] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] enabled? yes
<7> [258.291992] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:76:VGA-1] enabled? no
<7> [258.291999] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:79:HDMI-A-1] enabled? no
<7> [258.292007] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:DP-1] enabled? no
<7> [258.292014] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:92:HDMI-A-2] enabled? no
<7> [258.292021] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:96:HDMI-A-3] enabled? no
<7> [258.292027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:100:DP-2] enabled? no
<7> [258.292034] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:104:DP-3] enabled? no
<7> [258.292081] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [258.292111] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] found preferred mode: 1366x768
<7> [258.292119] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [258.292153] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:52:pipe A] desired mode 1366x768 set (0,0)
<7> [258.296538] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [258.314077] Console: switching to colour frame buffer device 170x48
Created at 2026-02-17 11:57:21