igt@i915_pm_rpm@module-reload on bat-jsl-1@CI_DRM

Detail	Value
Duration	35.03 seconds
Igt-Version	IGT-Version: 2.3-g07ca77c0e (x86_64) (Linux: 6.19.0-CI_DRM_17993-g61f901248233+ x86_64)
Out	Using IGT_SRANDOM=1771244239 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888144521820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811cf09820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x12e0/0x1d70 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (35.026s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (35.026s)
Dmesg	<6> [352.858859] Console: switching to colour dummy device 80x25 <6> [352.860466] [IGT] i915_pm_rpm: executing <7> [352.866447] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [352.868145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [352.868174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [352.869373] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [352.869931] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [352.870497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [352.871121] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [352.871140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [352.871151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [352.871208] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [352.871737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [352.872325] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [352.876046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [352.876070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [352.876084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [352.876309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [352.876326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [352.881082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [352.881281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [352.881297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [352.886039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [352.886252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [352.886267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [352.891008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [352.908082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [352.908145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [352.912750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [352.914114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [352.914136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [352.918823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [352.920065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [352.920087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [352.924939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [352.926645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [352.926664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [352.927319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [352.927851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [352.928401] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [352.929003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [352.929019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [352.929029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [352.929132] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [352.929667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [352.930232] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [352.931939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [352.931959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [352.931973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [352.932042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [352.932056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [352.936766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [352.936840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [352.936854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [352.941602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [352.941692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [352.941709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [352.946557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [352.947632] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:298] <4> [353.629308] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000 <4> [354.634232] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it... <3> [354.634288] snd_hda_intel 0000:00:1f.3: no codecs initialized <7> [354.637515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [354.638618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [355.732110] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off <7> [355.733115] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7> [355.734022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [355.735203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [355.735793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [364.116750] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:110:pipe A] <7> [364.117171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [364.118185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [364.119156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <4> [364.119474] aer_ratelimit: 83 callbacks suppressed <6> [364.119482] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.119501] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.119506] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.119513] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.119763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [364.120328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [364.120930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <6> [364.121575] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [364.121590] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.121595] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [364.121602] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [364.121607] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [364.121552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [364.122100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [364.122676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [364.123231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [364.123804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [364.124358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [364.124922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [364.125487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [364.126043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [364.126649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [364.127214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [364.127789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [364.128343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [364.128926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [364.129500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [364.130041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [364.130601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [364.131151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [364.131738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [364.132305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [364.132894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [364.133465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [364.134016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [364.134587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <7> [364.135135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [364.135698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [364.136246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [364.136821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [364.137383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [364.137970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [364.138539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [364.139088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [364.139658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [364.140209] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [364.140775] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0 <7> [364.141414] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [364.142113] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0 <7> [364.142677] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0 <7> [364.143212] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [364.143766] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [364.144306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [364.144865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [364.145494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0 <7> [364.146053] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [364.146628] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [364.147185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [364.147836] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz <7> [364.148480] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz <6> [364.149254] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.149275] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.149282] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.149288] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.149104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [364.149703] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [364.150248] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [364.150835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset] <7> [364.151389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [364.151971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [364.152547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [364.153101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [364.153677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [364.154229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [364.154815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [364.155369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [364.156234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [364.157301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [364.171545] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [364.376833] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0 <7> [364.378642] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [364.396966] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [364.398006] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [364.400669] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off <7> [364.401635] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time <7> [364.402577] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <6> [364.403671] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [364.403697] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Transmitter ID) <4> [364.403707] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00001001/00002000 <4> [364.403719] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [364.403728] pcieport 0000:00:1c.4: [12] Timeout <7> [364.407579] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [364.408522] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [364.409455] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [364.411934] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <6> [364.412500] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.412522] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.412531] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.412540] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.427955] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [364.428865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [364.429735] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [364.432286] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [364.457004] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [364.457975] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [364.458866] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [364.459852] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [364.463542] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [364.464930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [364.466483] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A] <7> [364.467779] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [364.468751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [364.469751] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [364.470756] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [364.472486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [364.473511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [364.474391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [364.475344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [364.476246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <6> [364.477321] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.477347] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.477358] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.477369] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.477129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [364.478022] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [364.479488] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [364.482490] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:188:pipe B] <7> [364.483277] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:266:pipe C] <6> [364.493700] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.493728] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.493739] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.493749] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.584774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [364.586485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [364.587457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [364.589166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [364.591284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [364.595473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [364.596958] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [364.598681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [364.599766] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [364.600706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [364.621484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [364.695667] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [364.696743] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [364.697646] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000 <7> [364.698638] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long <7> [364.699562] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met <7> [364.700498] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [364.701451] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A] <7> [364.702307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [364.703320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [364.704296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [364.705450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [364.706360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288) <7> [364.707522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [364.708598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [364.709601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [364.710566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316) <7> [364.711515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [364.712451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316) <7> [364.713351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [364.714298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [364.715236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [364.716210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [364.717149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802) <7> [364.718078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807) <7> [364.719095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816) <7> [364.720042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816) <7> [364.720971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [364.721897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316) <7> [364.722830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [364.723762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316) <7> [364.724686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [364.725639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [364.726585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [364.727518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [364.728453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802) <7> [364.729345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807) <7> [364.730264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816) <7> [364.731192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816) <7> [364.732130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [364.733074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [364.734011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [364.734946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <6> [364.735997] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.736022] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.736033] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.736045] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.735882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <6> [364.737003] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [364.737027] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.737036] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [364.737047] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [364.737056] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [364.736811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310) <7> [364.737756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310) <7> [364.738697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [364.739642] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [364.740843] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1 <7> [364.741834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969 <7> [364.742865] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55 <7> [364.743760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm <7> [364.744657] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 <7> [364.745574] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 <7> [364.746485] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 <7> [364.747499] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1 <7> [364.748454] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446 <7> [364.749348] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446 <7> [364.750270] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446 <7> [364.751298] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz <7> [364.752341] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz <7> [364.753303] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [364.754237] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [364.755171] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <6> [364.756500] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [364.756522] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [364.756532] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [364.756542] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [364.756116] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0 <7> [364.756982] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0 <7> [364.757843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset] <7> [364.758687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [364.759518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [364.760317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [364.761163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [364.761989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [364.762808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [364.763587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64 <7> [364.764248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [364.764940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [364.765619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [364.766268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [364.766943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [364.767607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [364.768249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [364.768928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [364.769610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0 <7> [364.770266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816 <7> [364.770878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [364.771448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [364.772007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [364.772578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [364.773132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa <7> [364.773701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [364.774258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655 <7> [364.774849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0 <7> [364.775430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [364.775982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [364.776561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [364.777114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [364.777686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [364.778233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [364.778801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [364.779359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.779947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.780524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.781073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [364.781644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [364.782199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.782767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.783313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [364.783883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [364.784455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [364.785014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [364.785609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [364.786162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [364.786745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [364.787293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [364.787857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [364.788421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [364.788974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [364.789561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [364.790118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [364.802610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [364.814553] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [364.815088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [364.815690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [364.816311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [364.817015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [364.817647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [364.818240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [364.819465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [364.820030] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [364.820813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [364.822550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [364.823128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [364.831455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [364.831969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [364.832935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [364.833928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [364.835120] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1 <7> [364.836220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [364.836782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [364.837326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [364.837909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [364.838474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [364.839012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [364.839839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [364.840467] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A] <7> [364.841045] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [364.843100] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on <7> [364.844125] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (121 ms remaining) <7> [364.968856] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [365.029332] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [365.030502] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on <7> [365.031478] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [365.091255] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [365.092227] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [365.093120] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [365.094142] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [365.250819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [365.252002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [365.254307] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [365.255346] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [365.259690] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [365.259817] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [365.261882] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [365.263004] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [365.265238] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [365.266145] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [365.268624] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK <7> [365.269528] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [365.272018] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1 <7> [365.272938] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1 <7> [365.275721] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [365.276620] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [365.475110] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [365.476421] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [365.476982] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [365.478093] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259 <7> [365.489483] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1 <7> [365.489958] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [365.493473] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [365.494015] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [365.496770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [365.497884] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [365.500237] [IGT] i915_pm_rpm: starting subtest module-reload <7> [365.501490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [365.506255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [365.698115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [365.699736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [365.701249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [365.704945] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:270] is removed <7> [365.705133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0 <7> [365.705897] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [365.706600] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [365.707238] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [365.707883] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [365.708879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0 <7> [365.709496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [365.710090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [365.710671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [365.726455] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [365.743784] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [365.747581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [365.748664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [365.749615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [365.750638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [365.751618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [365.752574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [365.753516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [365.754447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [365.755401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [365.756307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [365.757518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [365.758502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [365.759453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [365.760475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [365.761438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [365.762335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [365.763380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [365.764282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [365.765230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [365.766179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [365.767124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [365.768072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [365.768996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [365.769936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [365.770868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [365.771770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [365.772603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [365.773437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [365.774230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [365.775099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <7> [365.775935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [365.776767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [365.777604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [365.778427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [365.779026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [365.779653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [365.780248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [365.780858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [365.781473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [365.782076] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [365.782712] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0 <7> [365.783501] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [365.784269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0 <7> [365.785012] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz <7> [365.785650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [365.786196] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [365.786767] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [365.787329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset] <7> [365.787907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [365.788476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [365.789020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [365.789588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [365.790140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [365.790730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [365.791292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [365.791879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [365.803466] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [366.009570] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0 <7> [366.011226] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [366.029734] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off <7> [366.030736] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time <7> [366.031692] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [366.033984] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [366.034898] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [366.035784] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [366.036696] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [366.053874] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [366.054805] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [366.055675] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [366.056611] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [366.085926] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [366.086904] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [366.087801] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [366.088777] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [366.092400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [366.093784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [366.095737] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A] <7> [366.097163] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [366.098156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [366.099189] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [366.100936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [366.102110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [366.103091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [366.104015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [366.104904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [366.105811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [366.106692] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [366.108191] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [366.152042] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [366.170807] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs <7> [366.180913] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs <7> [366.185832] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs <7> [366.191392] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs <7> [366.213807] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [366.215276] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (378 ms remaining) <7> [366.600771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [366.707719] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [366.715056] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <4> [366.715078] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [366.715085] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000 <4> [366.715092] nvme 0000:02:00.0: [12] Timeout <6> [367.513724] [IGT] Reloading i915 w/o display <5> [369.158458] Setting dangerous option force_probe - tainting kernel <6> [369.181464] i915 0000:00:02.0: [drm] Found jasperlake (device ID 4e51) integrated display version 11.00 stepping B0 <7> [369.184585] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7> [369.185544] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [369.186275] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH <7> [369.186984] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [369.187863] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [369.188930] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [369.189600] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 19200 kHz <7> [369.191432] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001 <7> [369.192038] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001 <7> [369.193577] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [369.194217] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [369.194794] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [369.195360] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [369.195386] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [369.196904] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [369.196987] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7 <7> [369.197713] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [369.198396] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31783 MiB [mem 0x00000000-0x7c2707fff], io: n/a <7> [369.198936] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 58 MiB [mem 0x7c000000-0x7f9fffff], io: n/a <7> [369.200304] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76b06018 <4> [369.201138] aer_ratelimit: 17 callbacks suppressed <6> [369.201146] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.201191] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.201199] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.201207] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.201116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [369.201816] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [369.202512] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [369.203197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <6> [369.209304] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [369.209318] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Transmitter ID) <4> [369.209323] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00001001/00002000 <4> [369.209329] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [369.209334] pcieport 0000:00:1c.4: [12] Timeout <6> [369.213344] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.213364] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.213370] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.213376] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.232254] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583 <7> [369.232914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [369.233494] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [369.234350] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [369.235067] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no <7> [369.235778] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [369.236459] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [369.237100] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no <7> [369.237802] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [369.238489] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [369.239127] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [369.239800] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [369.240694] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4 <7> [369.241409] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [369.242073] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 3 <7> [369.242752] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [369.243447] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50 <7> [369.244230] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56 <7> [369.244905] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68 <7> [369.245621] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834 <7> [369.246327] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9878 <7> [369.246994] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9941 <7> [369.247696] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899 <7> [369.248368] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=15583 <7> [369.249003] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=16488 <6> [369.249726] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [369.249747] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.249754] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [369.249761] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [369.249767] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [369.249674] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069 <7> [369.250374] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=21483 <7> [369.251052] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=23719 <7> [369.251761] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280 <7> [369.252450] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000 <7> [369.253108] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000 <7> [369.253765] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000 <7> [369.254458] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000 <7> [369.255097] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000 <7> [369.255805] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000 <7> [369.256522] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000 <7> [369.257215] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000 <7> [369.259192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [369.259896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 236 <7> [369.260614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [369.261337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [369.262019] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [369.262719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [369.263400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 850) <7> [369.264045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [369.264702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [369.265455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [369.266197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366) <7> [369.267186] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 273, min size 305) <7> [369.267868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 136) <7> [369.268666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [369.269354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [369.269992] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [369.270692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [369.271394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [369.272067] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [369.272776] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [369.273464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [369.274094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [369.274755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [369.275459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [369.276273] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [369.276928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [369.277606] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [369.278290] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a <7> [369.278983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [369.279938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [369.280709] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [369.281425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [369.282375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [369.283032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [369.283693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [369.284494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [369.285209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [369.286062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [369.287919] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin <7> [369.290775] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [369.291591] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0 <7> [369.292292] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP) <7> [369.292952] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [369.295567] i915 0000:00:02.0: [drm:intel_bw_init [i915]] Forcing SAGV disable: mask 0x3 <6> [369.298795] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) <7> [369.298971] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [369.300528] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7> [369.301252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [369.301887] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 20 (20.0 usec) <7> [369.302553] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 20 (20.0 usec) <7> [369.303218] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 20 (20.0 usec) <7> [369.303863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 30 (30.0 usec) <7> [369.304580] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 73 (73.0 usec) <7> [369.305268] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 133 (133.0 usec) <7> [369.305905] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 140 (140.0 usec) <7> [369.306570] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [369.307224] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 22 (22.0 usec) <6> [369.307537] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.307554] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.307560] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.307567] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.307856] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 22 (22.0 usec) <7> [369.308624] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 22 (22.0 usec) <7> [369.309333] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 32 (32.0 usec) <7> [369.310002] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 75 (75.0 usec) <7> [369.310666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 135 (135.0 usec) <7> [369.311344] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 142 (142.0 usec) <6> [369.317514] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.317535] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.317542] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.317549] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.330189] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [369.353765] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [369.354602] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz <7> [369.355364] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1113600 kHz <7> [369.356219] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:268:DDI A/PHY A] Using AUX CH A (VBT) <7> [369.357024] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:268:DDI A/PHY A] <7> [369.378208] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [369.379018] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [369.379787] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [369.380581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <6> [369.384411] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.384432] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.384439] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.384447] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.385018] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [369.385990] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [369.386761] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [369.387475] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [369.388181] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [369.388869] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [369.392368] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:268:DDI A/PHY A] initial power sequencer: PPS 0 <7> [369.393249] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [369.393926] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [369.394624] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [369.395303] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [369.395951] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [369.396750] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [369.398681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <6> [369.399570] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.399593] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.399600] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.399608] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.401123] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [369.401927] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [369.402725] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [369.414248] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [369.415053] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [369.415779] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [369.625584] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [369.626288] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001 <7> [369.627311] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 00 00 <7> [369.630948] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [369.639402] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.641478] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.643552] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.645486] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.647464] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.649502] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.651431] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.653459] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [369.655255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [369.655283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [369.655299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [369.655574] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [369.656748] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [369.657871] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:269:eDP-1] Performing OUI wait (30 ms) <7> [369.662721] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:269:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [369.663785] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:269:eDP-1] DRRS type: none <7> [369.665121] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:269:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [369.666275] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:269:eDP-1] backlight initialized, disabled, brightness 0/96000 <7> [369.667948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [369.669009] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <6> [369.669823] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.669847] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.669857] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.669868] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.670085] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [369.671163] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [369.672223] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [369.673398] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [369.675326] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:277:DDI B/PHY B] Using AUX CH B (VBT) <6> [369.676723] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [369.676748] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [369.676758] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [369.676770] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [369.676502] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:277:DDI B/PHY B] <7> [369.679170] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [369.680356] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:277:DDI B/PHY B] <7> [369.681412] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:277:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [369.683419] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:292:DDI C (TC)/PHY C] <7> [369.684472] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:292:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT) <7> [369.686724] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [369.687859] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <6> [369.689065] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <4> [369.689085] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [369.689095] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000 <4> [369.689105] nvme 0000:02:00.0: [12] Timeout <7> [369.689111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] hw state readout: disabled <7> [369.691077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] hw state readout: disabled <7> [369.693079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] hw state readout: disabled <7> [369.694258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [369.695402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [369.696626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] hw state readout: disabled, pipe A <7> [369.697807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] hw state readout: disabled, pipe A <7> [369.698976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] hw state readout: disabled, pipe A <7> [369.699993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] hw state readout: disabled, pipe A <7> [369.700918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] hw state readout: disabled, pipe A <7> [369.701868] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] hw state readout: disabled, pipe A <7> [369.702786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] hw state readout: disabled, pipe B <7> [369.703729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] hw state readout: disabled, pipe B <7> [369.704692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] hw state readout: disabled, pipe B <7> [369.705628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] hw state readout: disabled, pipe B <7> [369.706522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] hw state readout: disabled, pipe B <7> [369.707269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] hw state readout: disabled, pipe B <7> [369.708007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] hw state readout: disabled, pipe B <7> [369.708811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] hw state readout: disabled, pipe B <7> [369.709610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] hw state readout: disabled, pipe C <7> [369.710341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] hw state readout: disabled, pipe C <7> [369.711031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] hw state readout: disabled, pipe C <7> [369.711740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] hw state readout: disabled, pipe C <7> [369.712456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] hw state readout: disabled, pipe C <7> [369.713160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] hw state readout: disabled, pipe C <7> [369.713885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] hw state readout: disabled, pipe C <7> [369.714639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] hw state readout: disabled, pipe C <7> [369.715372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DDI A/PHY A] hw state readout: disabled, pipe A <7> [369.716070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DDI B/PHY B] hw state readout: disabled, pipe A <7> [369.716738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST A] hw state readout: disabled, pipe A <7> [369.717405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST B] hw state readout: disabled, pipe B <7> [369.718041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:281:DP-MST C] hw state readout: disabled, pipe C <7> [369.718790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI C (TC)/PHY C] hw state readout: disabled, pipe A <7> [369.719558] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [369.720303] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [369.721031] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [369.721932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:269:eDP-1] hw state readout: disabled <7> [369.722705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:278:DP-1] hw state readout: disabled <7> [369.723494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled <7> [369.724306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:HDMI-A-2] hw state readout: disabled <7> [369.724972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [369.725650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [369.726349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] min_cdclk 0 kHz <7> [369.726975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] min_cdclk 0 kHz <7> [369.727631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] min_cdclk 0 kHz <7> [369.728321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] min_cdclk 0 kHz <7> [369.728989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] min_cdclk 0 kHz <7> [369.729709] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] min_cdclk 0 kHz <7> [369.730395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] min_cdclk 0 kHz <7> [369.731048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] min_cdclk 0 kHz <7> [369.731714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] min_cdclk 0 kHz <7> [369.732382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] min_cdclk 0 kHz <7> [369.733020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] min_cdclk 0 kHz <7> [369.733726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] min_cdclk 0 kHz <7> [369.734431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] min_cdclk 0 kHz <7> [369.735082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] min_cdclk 0 kHz <7> [369.735765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] min_cdclk 0 kHz <7> [369.736458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] min_cdclk 0 kHz <7> [369.737087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] min_cdclk 0 kHz <7> [369.737739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] min_cdclk 0 kHz <7> [369.738404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] min_cdclk 0 kHz <7> [369.739070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] min_cdclk 0 kHz <7> [369.739787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] min_cdclk 0 kHz <7> [369.740481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] min_cdclk 0 kHz <7> [369.741161] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] min_cdclk 0 kHz <7> [369.741801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] min_cdclk 0 kHz <7> [369.742453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] min_cdclk 0 kHz <7> [369.743106] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:110:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [369.743811] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:188:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [369.744511] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:266:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [369.745186] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [369.745860] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [369.746540] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [369.802179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [setup_hw_state] <7> [369.802747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [setup_hw_state] <7> [369.803271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [setup_hw_state] <7> [369.804505] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [369.805109] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [369.805735] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [369.806350] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [369.806993] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global <7> [369.811494] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0 <7> [369.812251] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0 <7> [369.812883] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0 <7> [369.817849] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0 <7> [369.819707] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0 <7> [369.821642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0 <7> [369.854470] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [369.855107] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [369.855570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [369.856249] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [369.857066] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [369.857814] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [369.858487] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 0: start 0x8 <7> [369.859016] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 1: start 0x108 <7> [369.859660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 2: start 0x208 <7> [369.860351] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 3: start 0x308 <7> [369.860997] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 4: start 0x3c8 <7> [369.861710] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 0: start 0x8 <7> [369.862405] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 1: start 0x108 <7> [369.863055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 2: start 0x208 <7> [369.863725] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 3: start 0x308 <7> [369.864396] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 4: start 0x3c8 <7> [369.865031] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 0: start 0x8 <7> [369.865701] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 1: start 0x108 <7> [369.866397] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 2: start 0x208 <7> [369.867064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 3: start 0x308 <7> [369.867738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 4: start 0x3c8 <7> [369.868869] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [369.869562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [369.870236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [369.870909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [fastset] <7> [369.871619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [fastset] <7> [369.872343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [fastset] <7> [369.873481] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [369.875267] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:188:pipe B] <7> [369.876642] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:266:pipe C] <7> [369.877992] i915 0000:00:02.0: [drm:icl_sagv_post_plane_update [i915]] Relaxing QGV points: 0x3 -> 0x0 <7> [369.887225] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:269:eDP-1] adding connector to sysfs <7> [369.891079] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:269:eDP-1] backlight device intel_backlight registered <7> [369.891944] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:269:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [369.893624] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [369.900861] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:269:eDP-1] generating connector hotplug event <7> [369.901086] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:278:DP-1] adding connector to sysfs <7> [369.903573] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [369.907815] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:278:DP-1] generating connector hotplug event <7> [369.908057] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs <7> [369.909570] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event <7> [369.909767] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-2] adding connector to sysfs <7> [369.911226] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-2] generating connector hotplug event <6> [369.911414] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [369.920000] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [369.986018] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [370.000526] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 <7> [370.003952] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810) <7> [370.011682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [370.012520] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:278:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [370.014174] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:110:pipe A] not active, skipping <7> [370.014879] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:188:pipe B] not active, skipping <7> [370.015569] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:266:pipe C] not active, skipping <7> [370.016256] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [370.016919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [370.017608] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [370.018310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [370.018550] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [370.018944] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [370.019672] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [370.021403] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [370.021582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [370.021605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [370.022427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] status updated from unknown to disconnected <7> [370.022462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected <7> [370.022497] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [370.024162] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:269:eDP-1] EDID changed, epoch counter 2 <7> [370.024220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [370.024241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [370.024991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [370.025015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [370.025031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [370.025789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [370.025811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [370.025825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [370.026555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [370.026573] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [370.026586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no <7> [370.026597] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [370.026608] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [370.026618] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [370.026696] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [370.026725] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [370.026879] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [370.026900] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [370.031239] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 11 <7> [370.032038] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: B0 <7> [370.032792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [370.033510] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [370.034221] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [370.034912] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [370.035644] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [370.036368] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [370.037047] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [370.037810] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [370.038520] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [370.039201] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [370.039882] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [370.040590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [370.041285] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [370.041946] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [370.042670] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [370.043374] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [370.044051] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: no <7> [370.044735] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [370.045432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7> [370.046090] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 19200 kHz <7> [370.047244] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [370.047405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [370.047427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [370.048080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected <7> [370.048102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [370.048161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [370.048816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [370.048836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [370.048851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [370.049562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [370.049590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [370.049606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [370.050282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [370.050303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [370.050316] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no <7> [370.050327] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [370.050338] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [370.050348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [370.050428] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [370.050462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [370.050614] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [370.050662] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [370.050979] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [370.052495] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [370.053731] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [370.054785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [370.054546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [370.054830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [370.055527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected <7> [370.055705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [370.056635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [370.056469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [370.056658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [370.057382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [370.057297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11 <7> [370.057766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [370.057852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 11 <7> [370.057788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [370.058446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [370.058430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 11 <7> [370.059077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [370.058972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7> [370.059101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [370.059545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: B0 <7> [370.059871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [370.060085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7> [370.060458] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [370.060507] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no <7> [370.060520] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [370.060530] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [370.060540] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [370.060774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [370.061396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7> [370.061963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: JASPERLAKE <7> [370.062539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 36 <7> [370.062888] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [370.062959] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [370.063091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [370.063434] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [370.063488] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [370.063706] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [370.063671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [370.064238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [370.064763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [370.065355] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [370.065909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [370.066484] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [370.067028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [370.067585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [370.068109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [370.068666] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [370.069218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [370.069757] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [370.070316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [370.070843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [370.071384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [370.071919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [370.072488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [370.073038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [370.073615] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [370.074155] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [370.074687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [370.075239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7> [370.075784] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [370.076336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [370.076861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [370.077402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [370.077930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [370.078505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [370.079054] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [370.079622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [370.080166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [370.080701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [370.081278] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [370.081804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [370.082342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7> [370.082866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [370.083429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [370.083982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [370.084555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [370.085100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [370.085657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [370.086223] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [370.086770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 4 <7> [370.087328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 4 subslices, mask=0000000f <7> [370.087852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 16 <7> [370.088386] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 4 <7> [370.088921] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: yes <7> [370.089492] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: yes <7> [370.090045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [370.090607] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [370.090612] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [370.090617] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [370.113596] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [370.117206] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [370.121194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [370.123862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [370.125554] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [370.127235] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <4> [371.153340] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 <4> [372.156151] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000 <7> [372.177662] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off <7> [372.178186] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [372.178583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [372.180720] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [372.181348] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [372.181934] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [372.183467] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <4> [373.162046] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it... <3> [373.162102] snd_hda_intel 0000:00:1f.3: no codecs initialized <7> [373.165178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [373.166288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [373.167259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [373.168254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [373.169187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [373.170896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [381.207371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [381.212320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [381.213325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [381.214388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [381.215034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [381.215486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [381.226614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [381.252080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [381.266084] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [381.266655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [381.267076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [381.267477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.268005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.268656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.269286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [381.270399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [381.270989] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [381.272466] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [381.274232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [381.274824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [381.283712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [381.285932] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [381.290151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [381.291318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <4> [381.291673] aer_ratelimit: 11 callbacks suppressed <6> [381.291690] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.291704] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.291710] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.291716] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.292495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [381.293251] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [381.293864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <6> [381.300366] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.300386] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.300393] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.300399] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [381.305974] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.305995] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.306001] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.306008] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.306566] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [381.331038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <6> [381.336609] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [381.336635] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.336643] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [381.336652] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [381.336659] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [381.348122] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [381.348807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [381.349434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [381.350098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.350821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.351475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.352134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [381.353302] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [381.353942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [381.355577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [381.357324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [381.357962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [381.364627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [381.365105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [381.365746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [381.366302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [381.366866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [381.367393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <6> [381.368926] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.368940] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.368946] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.368953] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.368888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [381.372375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [381.373642] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <6> [381.375009] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.375032] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.375039] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.375046] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.375282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [381.375989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [381.376573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [381.387538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [381.390969] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.390984] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.390990] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.390995] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.534159] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [381.739135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [381.758082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [381.758844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [381.759391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [381.760008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.760739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.761352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [381.762014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [381.763124] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [381.763667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [381.765146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [381.766903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [381.767526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [381.768908] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [381.768923] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.768929] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [381.768936] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [381.768942] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [381.776348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <6> [381.776839] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.776857] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.776862] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.776867] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.776938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [381.777411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [381.778000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [381.778324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [381.778615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [381.779304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [381.780386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [381.781838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [381.782796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [381.783613] i915 0000:00:02.0: [drm:drm_client_release] fbdev <6> [381.785455] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [381.785477] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [381.785483] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [381.785489] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [381.825931] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [381.847278] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs <7> [381.857941] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs <7> [381.859121] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs <7> [381.860181] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs <7> [381.899731] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [381.901179] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [381.901932] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [381.912613] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [382.622169] [IGT] Reloading i915 as normal <5> [384.310563] Setting dangerous option force_probe - tainting kernel <6> [384.334471] i915 0000:00:02.0: [drm] Found jasperlake (device ID 4e51) integrated display version 11.00 stepping B0 <7> [384.337721] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7> [384.338702] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [384.339435] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH <7> [384.340128] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [384.340992] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [384.342090] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [384.342789] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 19200 kHz <7> [384.344558] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001 <7> [384.345145] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001 <7> [384.346680] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [384.347285] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [384.348014] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [384.348614] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [384.348642] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [384.350199] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [384.350289] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7 <7> [384.351002] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [384.351689] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31783 MiB [mem 0x00000000-0x7c2707fff], io: n/a <7> [384.352255] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 58 MiB [mem 0x7c000000-0x7f9fffff], io: n/a <7> [384.353839] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76b06018 <7> [384.354679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [384.355316] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [384.356004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [384.356701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [384.383468] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583 <7> [384.384032] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [384.384550] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [384.385775] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [384.386501] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no <7> [384.387194] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [384.387930] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [384.388621] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no <7> [384.389282] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [384.389987] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [384.390717] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [384.391414] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [384.392320] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4 <7> [384.393023] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [384.393694] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 3 <7> [384.394326] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [384.394999] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50 <7> [384.395719] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56 <7> [384.396435] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68 <7> [384.397114] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834 <7> [384.397802] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9878 <7> [384.398478] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9941 <7> [384.399144] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899 <7> [384.399804] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=15583 <7> [384.400501] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=16488 <7> [384.401178] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069 <7> [384.401888] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=21483 <7> [384.402582] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=23719 <7> [384.403227] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280 <7> [384.403886] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000 <7> [384.404555] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000 <7> [384.405242] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000 <7> [384.405961] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000 <7> [384.406657] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000 <7> [384.407307] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000 <7> [384.407980] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000 <7> [384.408643] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000 <7> [384.410733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [384.411568] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 236 <7> [384.412281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [384.413018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [384.413744] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [384.414429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [384.415116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 850) <7> [384.415848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34) <7> [384.416579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [384.417293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [384.418008] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366) <7> [384.418698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 273, min size 305) <7> [384.419355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 136) <7> [384.420060] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [384.420806] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [384.421507] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [384.422176] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [384.422855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [384.423542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [384.424198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [384.424887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [384.425593] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [384.426272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [384.426955] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [384.427647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [384.428281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [384.428944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0 <7> [384.429651] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a <7> [384.430429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [384.431433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [384.432176] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [384.432881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [384.433755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [384.434445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [384.435137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [384.435990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [384.436707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [384.437573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [384.439357] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin <7> [384.442613] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [384.443359] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0 <7> [384.443744] i915 0000:00:02.0: [drm:intel_bw_init [i915]] Forcing SAGV disable: mask 0x3 <7> [384.444094] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP) <7> [384.444883] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [384.445925] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [384.447632] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <6> [384.448121] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) <7> [384.448323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [384.449010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 20 (20.0 usec) <7> [384.449676] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 20 (20.0 usec) <7> [384.450319] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 20 (20.0 usec) <7> [384.451017] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 30 (30.0 usec) <7> [384.451720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 73 (73.0 usec) <7> [384.452398] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 133 (133.0 usec) <7> [384.453056] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 140 (140.0 usec) <7> [384.453720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [384.454358] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 22 (22.0 usec) <7> [384.455005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 22 (22.0 usec) <7> [384.455699] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 22 (22.0 usec) <7> [384.456388] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 32 (32.0 usec) <7> [384.457066] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 75 (75.0 usec) <7> [384.457729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 135 (135.0 usec) <7> [384.458394] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 142 (142.0 usec) <7> [384.500660] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [384.521295] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [384.522128] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz <7> [384.522883] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1113600 kHz <7> [384.523737] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:268:DDI A/PHY A] Using AUX CH A (VBT) <7> [384.524553] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:268:DDI A/PHY A] <7> [384.545393] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [384.546132] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [384.546838] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [384.547724] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [384.548479] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [384.549162] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [384.549854] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [384.550552] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [384.551198] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [384.551901] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [384.552843] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:268:DDI A/PHY A] initial power sequencer: PPS 0 <7> [384.553624] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [384.554281] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [384.554965] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [384.555630] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [384.556243] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [384.557027] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [384.557973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [384.558994] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [384.559722] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [384.560449] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [384.570419] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [384.571096] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [384.571685] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [384.778183] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [384.779659] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001 <7> [384.780938] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 00 00 <7> [384.783611] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [384.792449] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.794539] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.797534] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.799549] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.801627] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.803654] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.805682] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.808650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer <7> [384.810492] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [384.810522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [384.810540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [384.810805] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [384.811978] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [384.813097] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:269:eDP-1] Performing OUI wait (30 ms) <7> [384.814775] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:269:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [384.815853] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:269:eDP-1] DRRS type: none <7> [384.817196] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:269:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [384.818321] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:269:eDP-1] backlight initialized, disabled, brightness 0/96000 <7> [384.819740] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [384.820784] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [384.821830] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [384.822854] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [384.823897] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [384.825054] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [384.826985] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:277:DDI B/PHY B] Using AUX CH B (VBT) <7> [384.828264] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:277:DDI B/PHY B] <7> [384.830918] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [384.832123] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:277:DDI B/PHY B] <7> [384.833191] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:277:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [384.835194] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:292:DDI C (TC)/PHY C] <7> [384.836242] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:292:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT) <7> [384.838487] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [384.839600] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [384.840896] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] hw state readout: disabled <7> [384.842899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] hw state readout: disabled <7> [384.844890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] hw state readout: disabled <7> [384.846113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [384.847188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A <7> [384.848193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] hw state readout: disabled, pipe A <7> [384.849192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] hw state readout: disabled, pipe A <7> [384.850271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] hw state readout: disabled, pipe A <7> [384.851322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] hw state readout: disabled, pipe A <7> [384.852372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] hw state readout: disabled, pipe A <7> [384.853395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] hw state readout: disabled, pipe A <7> [384.854200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] hw state readout: disabled, pipe B <7> [384.855069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] hw state readout: disabled, pipe B <7> [384.855939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] hw state readout: disabled, pipe B <7> [384.856811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] hw state readout: disabled, pipe B <7> [384.857651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] hw state readout: disabled, pipe B <7> [384.858493] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] hw state readout: disabled, pipe B <7> [384.859292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] hw state readout: disabled, pipe B <7> [384.860221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] hw state readout: disabled, pipe B <7> [384.861007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] hw state readout: disabled, pipe C <7> [384.861751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] hw state readout: disabled, pipe C <7> [384.862467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] hw state readout: disabled, pipe C <7> [384.863165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] hw state readout: disabled, pipe C <7> [384.863874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] hw state readout: disabled, pipe C <7> [384.864581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] hw state readout: disabled, pipe C <7> [384.865262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] hw state readout: disabled, pipe C <7> [384.866015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] hw state readout: disabled, pipe C <7> [384.866769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DDI A/PHY A] hw state readout: disabled, pipe A <7> [384.867513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DDI B/PHY B] hw state readout: disabled, pipe A <7> [384.868161] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST A] hw state readout: disabled, pipe A <7> [384.868822] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST B] hw state readout: disabled, pipe B <7> [384.869474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:281:DP-MST C] hw state readout: disabled, pipe C <7> [384.870154] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI C (TC)/PHY C] hw state readout: disabled, pipe A <7> [384.870894] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [384.871674] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [384.872426] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [384.873293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:269:eDP-1] hw state readout: disabled <7> [384.874055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:278:DP-1] hw state readout: disabled <7> [384.874811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled <7> [384.875579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:HDMI-A-2] hw state readout: disabled <7> [384.876251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [384.876953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz <7> [384.877619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] min_cdclk 0 kHz <7> [384.878272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] min_cdclk 0 kHz <7> [384.878930] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] min_cdclk 0 kHz <7> [384.879589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] min_cdclk 0 kHz <7> [384.880217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] min_cdclk 0 kHz <7> [384.880910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] min_cdclk 0 kHz <7> [384.881629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] min_cdclk 0 kHz <7> [384.882295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] min_cdclk 0 kHz <7> [384.882962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] min_cdclk 0 kHz <7> [384.883637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] min_cdclk 0 kHz <7> [384.884260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] min_cdclk 0 kHz <7> [384.884899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] min_cdclk 0 kHz <7> [384.885585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] min_cdclk 0 kHz <7> [384.886249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] min_cdclk 0 kHz <7> [384.886952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] min_cdclk 0 kHz <7> [384.887640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] min_cdclk 0 kHz <7> [384.888296] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] min_cdclk 0 kHz <7> [384.888956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] min_cdclk 0 kHz <7> [384.889614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] min_cdclk 0 kHz <7> [384.890241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] min_cdclk 0 kHz <7> [384.890957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] min_cdclk 0 kHz <7> [384.891652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] min_cdclk 0 kHz <7> [384.892437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] min_cdclk 0 kHz <7> [384.893090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] min_cdclk 0 kHz <7> [384.893759] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] min_cdclk 0 kHz <7> [384.894421] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:110:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [384.895052] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:188:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [384.895713] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:266:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [384.896399] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [384.897092] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [384.897791] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [384.952463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [setup_hw_state] <7> [384.953016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [setup_hw_state] <7> [384.953560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [setup_hw_state] <7> [384.954719] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [384.955323] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [384.955937] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [384.956726] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [384.957442] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global <7> [384.962193] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0 <7> [384.962939] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0 <7> [384.963597] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0 <7> [384.968390] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0 <7> [384.970332] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0 <7> [384.972199] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0 <7> [385.005291] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [385.005950] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [385.006447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [385.007074] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [385.007938] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [385.008675] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [385.009271] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 0: start 0x8 <7> [385.009926] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 1: start 0x108 <7> [385.010627] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 2: start 0x208 <7> [385.011263] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 3: start 0x308 <7> [385.011937] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 4: start 0x3c8 <7> [385.012632] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 0: start 0x8 <7> [385.013295] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 1: start 0x108 <7> [385.013986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 2: start 0x208 <7> [385.014668] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 3: start 0x308 <7> [385.015298] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 4: start 0x3c8 <7> [385.015961] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 0: start 0x8 <7> [385.016636] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 1: start 0x108 <7> [385.017298] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 2: start 0x208 <7> [385.017990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 3: start 0x308 <7> [385.018672] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 4: start 0x3c8 <7> [385.019809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [385.020585] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [385.021235] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [385.021952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [fastset] <7> [385.022666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [fastset] <7> [385.023326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [fastset] <7> [385.024419] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [385.026187] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:188:pipe B] <7> [385.027597] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:266:pipe C] <7> [385.028912] i915 0000:00:02.0: [drm:icl_sagv_post_plane_update [i915]] Relaxing QGV points: 0x3 -> 0x0 <7> [385.038486] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:269:eDP-1] adding connector to sysfs <7> [385.041334] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:269:eDP-1] backlight device intel_backlight registered <7> [385.042162] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:269:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [385.043758] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [385.048245] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:269:eDP-1] generating connector hotplug event <7> [385.048494] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:278:DP-1] adding connector to sysfs <7> [385.050588] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [385.059067] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:278:DP-1] generating connector hotplug event <7> [385.059280] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs <7> [385.061033] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event <7> [385.061239] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-2] adding connector to sysfs <7> [385.068163] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-2] generating connector hotplug event <6> [385.068329] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [385.078288] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [385.141866] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [385.155682] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 <7> [385.161599] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810) <7> [385.168910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.171266] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:110:pipe A] not active, skipping <7> [385.172066] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:188:pipe B] not active, skipping <7> [385.172802] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:266:pipe C] not active, skipping <7> [385.173505] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [385.174443] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:278:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [385.175172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.178089] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [385.180147] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [385.180883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.182503] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [385.186431] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [385.188396] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [385.191039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [385.191067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [385.193394] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [385.194131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [385.194868] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [385.195620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [385.195641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [385.195653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [385.195719] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [385.196447] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [385.197097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [385.200656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] status updated from unknown to connected <7> [385.201018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [385.201034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.201049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [385.201066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.201081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.202378] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [385.206049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.206081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.206098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.211176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.211210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.211227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.216231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.216261] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes <7> [385.216275] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [385.216286] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [385.216296] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [385.216393] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [385.216444] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800 <7> [385.216457] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [385.216498] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0) <7> [385.216668] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [385.216741] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [385.239056] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00100000 <6> [385.241259] fbcon: i915drmfb (fb0) is primary device <6> [385.242759] Console: switching to colour frame buffer device 200x56 <6> [385.242792] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [385.242814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 11 <7> [385.243661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: B0 <7> [385.244484] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [385.245158] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [385.245859] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [385.246551] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [385.247227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [385.247961] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [385.248708] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [385.249436] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [385.250121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [385.250846] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [385.251553] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [385.252227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [385.252919] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [385.253610] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [385.254283] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [385.254982] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [385.255715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: no <7> [385.256411] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [385.257084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7> [385.257784] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 19200 kHz <7> [385.258867] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [385.258900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [385.260571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [385.260616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [385.262127] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [385.262852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [385.263539] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [385.264780] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [385.264802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [385.264829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [385.264937] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [385.265646] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [385.266303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [385.270745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [385.270787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.270802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [385.270820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.270835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.275610] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [385.276594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.276624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.276641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.277450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [385.279762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [385.280626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [385.281590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.281620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.281637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.282644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11 <7> [385.283187] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 11 <7> [385.283751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 11 <7> [385.284284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7> [385.284848] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: B0 <7> [385.285418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7> [385.285949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [385.286504] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7> [385.287039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: JASPERLAKE <7> [385.287605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 36 <7> [385.288142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [385.288729] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [385.289271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [385.289848] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [385.290402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [385.290942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [385.291509] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [385.292061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [385.292628] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [385.293181] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [385.293752] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [385.294289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [385.294883] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [385.295444] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [385.295974] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [385.296511] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [385.297025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [385.297578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [385.298108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [385.298672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [385.299207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [385.299776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [385.300344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7> [385.300885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [385.301441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [385.301973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [385.302539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [385.303066] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [385.303631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [385.304173] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [385.304746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [385.305277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [385.305852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [385.306443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [385.306986] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [385.307555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7> [385.308188] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [385.308759] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [385.309306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [385.309854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [385.310420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [385.310976] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [385.311573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [385.312134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 4 <7> [385.312709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 4 subslices, mask=0000000f <7> [385.313256] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 16 <7> [385.313839] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 4 <7> [385.314416] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: yes <7> [385.314953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: yes <7> [385.315489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [385.316022] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [385.316027] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [385.316031] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [385.316169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.316195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes <7> [385.316209] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [385.316221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [385.316231] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [385.316952] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [385.317038] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800 <7> [385.317051] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [385.317182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0) <7> [385.320169] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [385.321100] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [385.321830] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000 <7> [385.322569] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long <7> [385.323233] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met <7> [385.323970] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [385.324712] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A] <7> [385.325419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [385.326124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [385.326856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [385.327571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [385.328254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288) <7> [385.328953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [385.329649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [385.330315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [385.331001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316) <7> [385.331703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [385.332407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316) <7> [385.333089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [385.333790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [385.334482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [385.335160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [385.335859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802) <7> [385.336561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807) <7> [385.337244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816) <7> [385.337933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816) <7> [385.338628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [385.339303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316) <7> [385.340042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [385.340804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316) <7> [385.341509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [385.342185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [385.342909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [385.343629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [385.344349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802) <7> [385.345042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807) <7> [385.345774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816) <7> [385.346481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816) <7> [385.347166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [385.347883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [385.348506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [385.349092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [385.349689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dpll_hw_state <7> [385.350255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [385.350847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [385.351493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [385.352071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [385.352670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [385.353241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310) <7> [385.353846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310) <7> [385.354437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [385.355018] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [385.357406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1 <7> [385.358057] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969 <7> [385.358646] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55 <7> [385.359195] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm <7> [385.359766] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 <7> [385.360335] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 <7> [385.360884] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 <7> [385.361830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1 <7> [385.362483] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446 <7> [385.363055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446 <7> [385.363657] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446 <7> [385.364685] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz <7> [385.365662] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz <7> [385.366267] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [385.366884] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [385.367475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [385.368051] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0 <7> [385.368672] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0 <7> [385.369264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset] <7> [385.369906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [385.370503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [385.371088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [385.371669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [385.372456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [385.373025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [385.373637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64 <7> [385.374209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [385.374820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [385.375417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [385.375996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [385.376606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [385.377173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [385.377781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [385.378363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [385.378925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0 <7> [385.379504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816 <7> [385.380059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [385.380651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.381236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.381827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [385.382413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa <7> [385.382975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [385.383568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655 <7> [385.384135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0 <7> [385.384730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [385.385297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [385.385884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [385.386469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [385.387037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [385.387632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [385.388186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [385.388765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.389336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.389892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.390464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [385.391040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [385.391613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.392168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.392743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [385.393300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [385.393902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [385.394489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [385.395052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [385.395645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [385.396207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [385.396779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [385.397360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [385.397923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [385.398513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [385.399069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [385.399667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [385.401470] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1 <7> [385.402923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [385.403521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [385.404182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [385.404786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [385.405377] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [385.405942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [385.407459] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A] <7> [385.408096] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [385.410180] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on <7> [385.411221] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <6> [385.412125] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [385.411905] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [385.423378] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [385.424004] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on <7> [385.424669] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [385.638680] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [385.639819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [385.645229] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [385.645388] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [385.647450] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [385.648554] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [385.651992] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [385.652913] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [385.655372] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK <7> [385.656231] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [385.658935] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1 <7> [385.659813] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1 <7> [385.662852] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [385.663784] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [385.862524] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [385.864323] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [385.864774] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [385.865537] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259 <7> [385.877487] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1 <7> [385.877962] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [385.881464] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [385.882106] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [385.883637] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [385.887418] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [385.888101] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [385.888161] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [385.888174] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [385.888370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [385.888392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [385.889669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [385.889958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [385.890243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [385.890855] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [385.890981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [385.892994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [385.893016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [385.893027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [385.893078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [385.893683] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [385.893800] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [385.894391] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [385.896863] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810 <7> [385.901356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [385.901381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.901396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [385.901414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.901430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.906205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.906245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.906262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.911168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.911207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.911223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.916122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.916157] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes <7> [385.916171] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no <7> [385.916182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7> [385.916192] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no <7> [385.916274] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [385.916421] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800 <7> [385.916436] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [385.916506] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0) <7> [385.916526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [385.916635] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [385.916550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [385.917956] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [385.918597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [385.919131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [385.920006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [385.920027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [385.920038] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [385.920090] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [385.920658] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [385.921186] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [385.924972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [385.924997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.925011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [385.925202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.925218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.930048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.930235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.930251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.935023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.935218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.935234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.940093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.955465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.955485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.960034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.961025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.961044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.965831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.966819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.966837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.971626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.973036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] <7> [385.973057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1] <7> [385.973762] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [385.974319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [385.974846] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [385.975465] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [385.975483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor <7> [385.975493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0 <7> [385.975546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no <7> [385.976072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [385.976615] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [385.978348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes: <7> [385.978369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [385.978383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [385.978459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] <7> [385.978475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [385.983188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected <7> [385.983264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7> [385.983281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [385.988083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7> [385.988167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] <7> [385.988183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [385.992947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected <7> [385.993865] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:297] <4> [386.929373] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 <4> [387.930274] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000 <4> [387.937328] aer_ratelimit: 34 callbacks suppressed <6> [387.937336] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [387.937351] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [387.937387] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [387.937397] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [388.935496] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it... <3> [388.935552] snd_hda_intel 0000:00:1f.3: no codecs initialized <7> [388.938808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [388.939907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <6> [388.941272] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [388.941298] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [388.941308] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [388.941319] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [388.951462] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [388.951489] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [388.951495] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [388.951502] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [390.290235] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off <7> [390.291237] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7> [390.292188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [390.293238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [390.293845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [397.115719] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:110:pipe A] <7> [397.116175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [397.117198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [397.118168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [397.118777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [397.119361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [397.119940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [397.120528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [397.121119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [397.121671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [397.122248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [397.122814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [397.123358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [397.123945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [397.124500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [397.125097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [397.125661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [397.126273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [397.126864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [397.127417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [397.127990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [397.128540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [397.129104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [397.129657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [397.130259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [397.130832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [397.131385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [397.131959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [397.132511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [397.133078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [397.133627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <7> [397.134191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [397.134743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [397.135331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [397.135918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [397.136474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [397.137052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [397.137607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [397.138179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [397.138727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [397.139298] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [397.139871] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0 <6> [397.140510] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.140528] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.140535] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.140541] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [397.140606] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 (no details found <7> [397.140694] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [397.141389] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0 <7> [397.141946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0 <7> [397.142481] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [397.143036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [397.143569] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [397.144110] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [397.144707] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0 <7> [397.145303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [397.145887] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [397.146441] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [397.147084] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz <7> [397.147697] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz <7> [397.148354] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [397.148926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [397.149466] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [397.150075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset] <7> [397.150652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [397.151257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [397.151836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [397.152388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [397.152958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [397.153513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [397.154075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [397.154621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <6> [397.155293] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.155312] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.155318] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.155324] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [397.155387] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 (no details found <7> [397.155629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [397.156770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [397.173854] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6> [397.278569] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.278608] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.278619] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.278630] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [397.383152] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0 <7> [397.384928] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [397.400181] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [397.401222] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [397.403886] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off <7> [397.404855] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time <7> [397.406110] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [397.406183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [397.407045] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [397.408197] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [397.410204] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [397.426485] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [397.427460] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [397.428335] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [397.429192] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <6> [397.432810] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.432829] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.432836] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.432844] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [397.459926] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [397.460856] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [397.461722] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [397.462671] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [397.466851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [397.468261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [397.469876] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A] <7> [397.471121] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [397.472079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <6> [397.473460] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.473485] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.473496] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.473507] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [397.473532] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <7> [397.473102] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <4> [397.473547] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [397.473556] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000 <4> [397.473564] nvme 0000:02:00.0: [12] Timeout <7> [397.474625] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [397.476206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [397.477233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [397.478152] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [397.479053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [397.479939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [397.480842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [397.481699] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [397.483160] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [397.486193] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:188:pipe B] <7> [397.487021] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:266:pipe C] <6> [397.493956] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.493987] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.493996] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.494006] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [397.497390] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [397.497405] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.497412] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [397.497419] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [397.591303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [397.593015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [397.593990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [397.595702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [397.597966] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [397.602875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [397.603820] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4 <4> [397.604189] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [397.604200] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000 <4> [397.604211] pcieport 0000:00:1c.4: [ 0] RxErr (First) <4> [397.604221] pcieport 0000:00:1c.4: [ 6] BadTLP <7> [397.604329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [397.606058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [397.607221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [397.608170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [397.629864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [397.701397] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [397.702531] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [397.703500] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000 <7> [397.704482] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long <7> [397.705811] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met <7> [397.706831] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [397.707825] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A] <7> [397.708683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [397.709616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [397.710557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [397.711596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [397.712549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288) <7> [397.713491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [397.714533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [397.715464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [397.716392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316) <7> [397.717329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [397.718264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316) <7> [397.719200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [397.720132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [397.721090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [397.722018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [397.722926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802) <7> [397.723853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807) <7> [397.724796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816) <7> [397.725708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816) <7> [397.726633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [397.727558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316) <7> [397.728477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [397.729401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316) <7> [397.730366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [397.731305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [397.732236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [397.733160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [397.734097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802) <7> [397.735019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807) <7> [397.735932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816) <7> [397.736853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816) <7> [397.737785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [397.738681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [397.739613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [397.740544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [397.741466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [397.742386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310) <7> [397.743311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310) <7> [397.744237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [397.745173] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [397.746277] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1 <7> [397.747220] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969 <7> [397.748116] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55 <7> [397.748988] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm <7> [397.749865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 <7> [397.750763] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 <7> [397.751632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 <7> [397.752648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1 <7> [397.753593] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446 <7> [397.754513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446 <7> [397.755430] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446 <7> [397.756449] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz <7> [397.757473] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz <7> [397.758438] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [397.759369] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [397.760194] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [397.761013] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0 <7> [397.761829] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0 <7> [397.762650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset] <7> [397.763490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [397.764327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [397.765165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [397.765991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [397.766679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [397.767292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [397.767910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64 <7> [397.768501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [397.769121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [397.769755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [397.770356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [397.770975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [397.771572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [397.772212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [397.772820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [397.773425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0 <7> [397.773990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816 <7> [397.774548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [397.775137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [397.775698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [397.776276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [397.776855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa <7> [397.777400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [397.777965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655 <7> [397.778515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0 <7> [397.779083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [397.779640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [397.780231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [397.780803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [397.781358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [397.781937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [397.782492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [397.783054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.783601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.784166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.784740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [397.785297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [397.785888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.786445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.787024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [397.787572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [397.788139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [397.788691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [397.789274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [397.789853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [397.790410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [397.790989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [397.791541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [397.792115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [397.792664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [397.793226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [397.793791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [397.805998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [397.819230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [397.819802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [397.820515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [397.821162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [397.821833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [397.822451] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [397.823116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [397.824237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [397.824821] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [397.825429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [397.827149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [397.827753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [397.836026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [397.836632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [397.837667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [397.838645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [397.839893] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1 <7> [397.841060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [397.841610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [397.842199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [397.842763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [397.843310] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [397.843871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [397.844683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [397.845322] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A] <7> [397.845931] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [397.847928] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on <7> [397.848931] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining) <7> [397.974880] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [398.064772] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [398.065429] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on <7> [398.066246] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [398.126076] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [398.127010] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [398.127876] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [398.128828] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [398.281209] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [398.282415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [398.284743] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on <7> [398.285775] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [398.290154] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [398.290282] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [398.292380] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [398.293516] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [398.295794] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [398.296634] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [398.299115] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK <7> [398.300079] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [398.302740] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1 <7> [398.303597] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1 <7> [398.306415] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [398.307308] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [398.505741] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [398.507752] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [398.508316] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [398.509438] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259 <7> [398.521857] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1 <7> [398.522388] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7> [398.540996] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [398.541549] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [398.544437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1] <7> [398.545355] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [398.549233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7> [398.554052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2] <7> [398.744520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [398.746183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [398.747661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <6> [398.752160] Console: switching to colour dummy device 80x25 <7> [398.752984] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:270] is removed <7> [398.753161] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0 <7> [398.753857] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [398.754433] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.755025] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.755577] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.756319] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0 <7> [398.756920] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [398.757480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [398.758439] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [398.773846] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7> [398.791009] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [398.794459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [398.795506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [398.796492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [398.797727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [398.798644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [398.799650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [398.800597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [398.801562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [398.802509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [398.803533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [398.804496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [398.805505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [398.806481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [398.807421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.808352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [398.809340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [398.810199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [398.811014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [398.811830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [398.812798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [398.813606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [398.814449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [398.815274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [398.816103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [398.816810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [398.817451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.818127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [398.818818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [398.819473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [398.820158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <7> [398.820832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [398.821480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [398.822151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [398.822822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [398.823481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [398.824095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [398.824659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [398.825246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [398.825817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [398.826373] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset <7> [398.826940] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0 <7> [398.827587] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [398.828326] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0 <7> [398.829023] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz <7> [398.829594] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [398.830181] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [398.830759] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [398.831323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset] <7> [398.831895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [398.832448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no <7> [398.833016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no <7> [398.833572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no <7> [398.834158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no <7> [398.834735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no <7> [398.835287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no <7> [398.835868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no <7> [398.848827] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [399.054999] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0 <7> [399.059505] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [399.076040] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off <7> [399.077035] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time <7> [399.077996] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [399.078922] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [399.079812] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [399.080762] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [399.080881] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [399.098321] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [399.099310] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [399.100208] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [399.101161] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [399.132229] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [399.132962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [399.133230] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long <7> [399.134118] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [399.134415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [399.137871] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A] <7> [399.139288] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A] <7> [399.140728] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [399.141712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [399.142752] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [399.144416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A] <7> [399.145492] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B] <7> [399.146404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A] <7> [399.147316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B] <7> [399.148208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C] <7> [399.149109] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C] <7> [399.150004] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1] <7> [399.151528] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A] <7> [399.207349] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [399.231565] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs <7> [399.244542] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs <7> [399.248295] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs <7> [399.249945] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs <7> [399.282137] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [399.283416] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (351 ms remaining) <7> [399.639092] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [399.742866] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [400.530313] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [400.533250] [IGT] i915_pm_rpm: exiting, ret=0

<7> [352.868145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [352.868174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [352.869373] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [352.869931] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [352.870497] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [352.871121] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [352.871140] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [352.871151] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [352.871208] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [352.871737] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [352.872325] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [352.876046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [352.876070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [352.876084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [352.876309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [352.876326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [352.881082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [352.881281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [352.881297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [352.886039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [352.886252] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [352.886267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [352.891008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [352.908082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [352.908145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [352.912750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [352.914114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [352.914136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [352.918823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [352.920065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [352.920087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [352.924939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [352.926645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [352.926664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [352.927319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [352.927851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [352.928401] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [352.929003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [352.929019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [352.929029] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [352.929132] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [352.929667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [352.930232] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [352.931939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [352.931959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [352.931973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [352.932042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [352.932056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [352.936766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [352.936840] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [352.936854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [352.941602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [352.941692] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [352.941709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [352.946557] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<4> [353.629308] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000

<4> [354.634232] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...

<7> [354.637515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [354.638618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [355.732110] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off

<7> [355.733115] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067

<7> [355.734022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [355.735203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [355.735793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [364.116750] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:110:pipe A]

<7> [364.117171] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [364.118185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [364.119156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<6> [364.119482] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.119501] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.119506] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.119763] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [364.120328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [364.120930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<6> [364.121575] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [364.121590] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.121595] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [364.121552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [364.122100] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [364.122676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [364.123231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [364.123804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [364.124358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [364.124922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [364.125487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [364.126043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [364.126649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [364.127214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [364.127789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [364.128343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [364.128926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [364.129500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [364.130041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [364.130601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [364.131151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [364.131738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [364.132305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [364.132894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [364.133465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [364.134016] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [364.134587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<7> [364.135135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [364.135698] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [364.136246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [364.136821] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [364.137383] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [364.137970] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [364.138539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [364.139088] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [364.139658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [364.140209] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [364.140775] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0

<7> [364.141414] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [364.142113] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0

<7> [364.142677] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0

<7> [364.143212] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [364.143766] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [364.144306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [364.144865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [364.145494] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0

<7> [364.146053] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [364.146628] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [364.147185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [364.147836] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz

<7> [364.148480] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz

<6> [364.149254] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.149275] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.149282] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.149104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [364.149703] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [364.150248] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [364.150835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset]

<7> [364.151389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [364.151971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [364.152547] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [364.153101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [364.153677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [364.154229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [364.154815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [364.155369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [364.156234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [364.157301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [364.171545] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [364.376833] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0

<7> [364.378642] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [364.396966] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [364.398006] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [364.400669] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off

<7> [364.401635] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [364.402577] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<6> [364.403671] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [364.403697] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Transmitter ID)

<4> [364.403707] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00001001/00002000

<7> [364.407579] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [364.408522] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [364.409455] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [364.411934] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<6> [364.412500] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.412522] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.412531] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.427955] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [364.428865] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [364.429735] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [364.432286] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [364.457004] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [364.457975] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [364.458866] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [364.459852] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [364.463542] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [364.464930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [364.466483] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A]

<7> [364.467779] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [364.468751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [364.469751] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [364.470756] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [364.472486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [364.473511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [364.474391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [364.475344] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [364.476246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<6> [364.477321] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.477347] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.477358] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.477129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [364.478022] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [364.479488] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [364.482490] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:188:pipe B]

<7> [364.483277] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:266:pipe C]

<6> [364.493700] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.493728] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.493739] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.584774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [364.586485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [364.587457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [364.589166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [364.591284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [364.595473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [364.596958] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [364.598681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [364.599766] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [364.600706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [364.621484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [364.695667] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [364.696743] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [364.697646] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000

<7> [364.698638] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long

<7> [364.699562] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met

<7> [364.700498] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [364.701451] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A]

<7> [364.702307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [364.703320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [364.704296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [364.705450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [364.706360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288)

<7> [364.707522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [364.708598] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [364.709601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [364.710566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316)

<7> [364.711515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [364.712451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316)

<7> [364.713351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [364.714298] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [364.715236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [364.716210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [364.717149] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802)

<7> [364.718078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807)

<7> [364.719095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816)

<7> [364.720042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816)

<7> [364.720971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [364.721897] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316)

<7> [364.722830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [364.723762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316)

<7> [364.724686] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [364.725639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [364.726585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [364.727518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [364.728453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802)

<7> [364.729345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807)

<7> [364.730264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816)

<7> [364.731192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816)

<7> [364.732130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [364.733074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [364.734011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [364.734946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<6> [364.735997] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.736022] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.736033] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.735882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<6> [364.737003] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [364.737027] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.737036] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [364.736811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310)

<7> [364.737756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310)

<7> [364.738697] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [364.739642] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [364.740843] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1

<7> [364.741834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969

<7> [364.742865] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55

<7> [364.743760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm

<7> [364.744657] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0

<7> [364.745574] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0

<7> [364.746485] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0

<7> [364.747499] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1

<7> [364.748454] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446

<7> [364.749348] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446

<7> [364.750270] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446

<7> [364.751298] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz

<7> [364.752341] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz

<7> [364.753303] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [364.754237] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [364.755171] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<6> [364.756500] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [364.756522] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [364.756532] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [364.756116] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0

<7> [364.756982] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0

<7> [364.757843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset]

<7> [364.758687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [364.759518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [364.760317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [364.761163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [364.761989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [364.762808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [364.763587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64

<7> [364.764248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [364.764940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [364.765619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [364.766268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [364.766943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [364.767607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [364.768249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [364.768928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [364.769610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0

<7> [364.770266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816

<7> [364.770878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [364.771448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [364.772007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [364.772578] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [364.773132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa

<7> [364.773701] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [364.774258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655

<7> [364.774849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0

<7> [364.775430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [364.775982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [364.776561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [364.777114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [364.777686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [364.778233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [364.778801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [364.779359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.779947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.780524] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.781073] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [364.781644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [364.782199] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.782767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.783313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [364.783883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [364.784455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [364.785014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [364.785609] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [364.786162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [364.786745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [364.787293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [364.787857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [364.788421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [364.788974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [364.789561] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [364.790118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [364.802610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [364.814553] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [364.815088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [364.815690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [364.816311] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [364.817015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [364.817647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [364.818240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [364.819465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [364.820030] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [364.820813] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [364.822550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [364.823128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [364.831455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [364.831969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [364.832935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [364.833928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [364.835120] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1

<7> [364.836220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [364.836782] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [364.837326] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [364.837909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [364.838474] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [364.839012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [364.839839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [364.840467] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A]

<7> [364.841045] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [364.843100] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on

<7> [364.844125] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (121 ms remaining)

<7> [364.968856] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [365.029332] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [365.030502] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on

<7> [365.031478] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [365.091255] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [365.092227] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [365.093120] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [365.094142] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [365.250819] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [365.252002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [365.254307] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [365.255346] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [365.259690] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [365.259817] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [365.261882] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [365.263004] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [365.265238] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [365.266145] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [365.268624] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK

<7> [365.269528] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [365.272018] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1

<7> [365.272938] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1

<7> [365.275721] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [365.276620] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [365.475110] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [365.476421] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [365.476982] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [365.478093] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259

<7> [365.489483] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1

<7> [365.489958] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [365.493473] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [365.494015] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [365.496770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [365.497884] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [365.501490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [365.506255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [365.698115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [365.699736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [365.701249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [365.704945] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:270] is removed

<7> [365.705133] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0

<7> [365.705897] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [365.706600] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [365.707238] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [365.707883] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [365.708879] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0

<7> [365.709496] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [365.710090] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [365.710671] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [365.726455] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [365.747581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [365.748664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [365.749615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [365.750638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [365.751618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [365.752574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [365.753516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [365.754447] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [365.755401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [365.756307] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [365.757518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [365.758502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [365.759453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [365.760475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [365.761438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [365.762335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [365.763380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [365.764282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [365.765230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [365.766179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [365.767124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [365.768072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [365.768996] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [365.769936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [365.770868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [365.771770] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [365.772603] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [365.773437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [365.774230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [365.775099] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<7> [365.775935] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [365.776767] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [365.777604] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [365.778427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [365.779026] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [365.779653] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [365.780248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [365.780858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [365.781473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [365.782076] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [365.782712] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0

<7> [365.783501] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [365.784269] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0

<7> [365.785012] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz

<7> [365.785650] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [365.786196] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [365.786767] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [365.787329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset]

<7> [365.787907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [365.788476] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [365.789020] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [365.789588] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [365.790140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [365.790730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [365.791292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [365.791879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [365.803466] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [366.009570] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0

<7> [366.011226] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [366.029734] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off

<7> [366.030736] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [366.031692] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [366.033984] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [366.034898] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [366.035784] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [366.036696] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [366.053874] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [366.054805] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [366.055675] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [366.056611] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [366.085926] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [366.086904] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [366.087801] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [366.088777] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [366.092400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [366.093784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [366.095737] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A]

<7> [366.097163] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [366.098156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [366.099189] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [366.100936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [366.102110] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [366.103091] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [366.104015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [366.104904] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [366.105811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [366.106692] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [366.108191] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [366.152042] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [366.170807] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs

<7> [366.180913] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs

<7> [366.185832] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs

<7> [366.191392] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs

<7> [366.213807] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [366.215276] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (378 ms remaining)

<7> [366.600771] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [366.707719] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [366.715056] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<4> [366.715078] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)

<4> [366.715085] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000

<5> [369.158458] Setting dangerous option force_probe - tainting kernel

<6> [369.181464] i915 0000:00:02.0: [drm] Found jasperlake (device ID 4e51) integrated display version 11.00 stepping B0

<7> [369.184585] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K

<7> [369.185544] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [369.186275] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH

<7> [369.186984] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [369.187863] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [369.188930] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [369.189600] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 19200 kHz

<7> [369.191432] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001

<7> [369.192038] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001

<7> [369.193577] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [369.194217] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [369.194794] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [369.196904] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [369.196987] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7

<7> [369.197713] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [369.198396] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31783 MiB [mem 0x00000000-0x7c2707fff], io: n/a

<7> [369.198936] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 58 MiB [mem 0x7c000000-0x7f9fffff], io: n/a

<7> [369.200304] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76b06018

<6> [369.201146] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.201191] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.201199] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.201116] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [369.201816] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [369.202512] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [369.203197] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<6> [369.209304] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [369.209318] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Transmitter ID)

<4> [369.209323] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00001001/00002000

<6> [369.213344] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.213364] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.213370] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.232254] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583

<7> [369.232914] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [369.233494] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [369.234350] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [369.235067] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no

<7> [369.235778] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [369.236459] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [369.237100] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no

<7> [369.237802] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [369.238489] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [369.239127] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [369.239800] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [369.240694] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4

<7> [369.241409] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [369.242073] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 3

<7> [369.242752] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [369.243447] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50

<7> [369.244230] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56

<7> [369.244905] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68

<7> [369.245621] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834

<7> [369.246327] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9878

<7> [369.246994] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9941

<7> [369.247696] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899

<7> [369.248368] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=15583

<7> [369.249003] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=16488

<6> [369.249726] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [369.249747] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.249754] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [369.249674] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069

<7> [369.250374] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=21483

<7> [369.251052] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=23719

<7> [369.251761] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280

<7> [369.252450] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000

<7> [369.253108] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000

<7> [369.253765] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000

<7> [369.254458] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000

<7> [369.255097] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000

<7> [369.255805] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000

<7> [369.256522] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000

<7> [369.257215] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000

<7> [369.259192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [369.259896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 236

<7> [369.260614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [369.261337] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [369.262019] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [369.262719] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [369.263400] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 850)

<7> [369.264045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [369.264702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [369.265455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [369.266197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366)

<7> [369.267186] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 273, min size 305)

<7> [369.267868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 136)

<7> [369.268666] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [369.269354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [369.269992] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [369.270692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [369.271394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [369.272067] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [369.272776] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [369.273464] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [369.274094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [369.274755] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [369.275459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [369.276273] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [369.276928] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [369.277606] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [369.278290] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a

<7> [369.278983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [369.279938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [369.280709] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [369.281425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [369.282375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [369.283032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [369.283693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [369.284494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [369.285209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [369.286062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [369.287919] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin

<7> [369.290775] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [369.291591] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0

<7> [369.292292] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP)

<7> [369.292952] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [369.295567] i915 0000:00:02.0: [drm:intel_bw_init [i915]] Forcing SAGV disable: mask 0x3

<6> [369.298795] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)

<7> [369.298971] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [369.300528] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us

<7> [369.301252] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [369.301887] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 20 (20.0 usec)

<7> [369.302553] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 20 (20.0 usec)

<7> [369.303218] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 20 (20.0 usec)

<7> [369.303863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 30 (30.0 usec)

<7> [369.304580] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 73 (73.0 usec)

<7> [369.305268] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 133 (133.0 usec)

<7> [369.305905] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 140 (140.0 usec)

<7> [369.306570] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [369.307224] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 22 (22.0 usec)

<6> [369.307537] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.307554] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.307560] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.307856] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 22 (22.0 usec)

<7> [369.308624] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 22 (22.0 usec)

<7> [369.309333] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 32 (32.0 usec)

<7> [369.310002] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 75 (75.0 usec)

<7> [369.310666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 135 (135.0 usec)

<7> [369.311344] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 142 (142.0 usec)

<6> [369.317514] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.317535] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.317542] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.330189] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [369.353765] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [369.354602] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz

<7> [369.355364] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1113600 kHz

<7> [369.356219] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:268:DDI A/PHY A] Using AUX CH A (VBT)

<7> [369.357024] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:268:DDI A/PHY A]

<7> [369.378208] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [369.379018] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [369.379787] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [369.380581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<6> [369.384411] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.384432] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.384439] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.385018] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [369.385990] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [369.386761] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [369.387475] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [369.388181] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [369.388869] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [369.392368] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:268:DDI A/PHY A] initial power sequencer: PPS 0

<7> [369.393249] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [369.393926] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [369.394624] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [369.395303] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [369.395951] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [369.396750] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [369.398681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<6> [369.399570] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.399593] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.399600] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.401123] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [369.401927] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [369.402725] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [369.414248] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [369.415053] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [369.415779] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [369.625584] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [369.626288] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001

<7> [369.627311] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 00 00

<7> [369.630948] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [369.639402] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.641478] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.643552] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.645486] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.647464] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.649502] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.651431] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.653459] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [369.655255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [369.655283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [369.655299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [369.655574] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [369.656748] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [369.657871] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:269:eDP-1] Performing OUI wait (30 ms)

<7> [369.662721] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:269:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [369.663785] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:269:eDP-1] DRRS type: none

<7> [369.665121] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:269:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [369.666275] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:269:eDP-1] backlight initialized, disabled, brightness 0/96000

<7> [369.667948] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [369.669009] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<6> [369.669823] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.669847] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.669857] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.670085] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [369.671163] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [369.672223] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [369.673398] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [369.675326] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:277:DDI B/PHY B] Using AUX CH B (VBT)

<6> [369.676723] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [369.676748] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [369.676758] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [369.676502] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:277:DDI B/PHY B]

<7> [369.679170] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [369.680356] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:277:DDI B/PHY B]

<7> [369.681412] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:277:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [369.683419] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:292:DDI C (TC)/PHY C]

<7> [369.684472] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:292:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT)

<7> [369.686724] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [369.687859] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<6> [369.689065] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<4> [369.689085] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)

<4> [369.689095] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000

<7> [369.689111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] hw state readout: disabled

<7> [369.691077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] hw state readout: disabled

<7> [369.693079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] hw state readout: disabled

<7> [369.694258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [369.695402] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [369.696626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] hw state readout: disabled, pipe A

<7> [369.697807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] hw state readout: disabled, pipe A

<7> [369.698976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] hw state readout: disabled, pipe A

<7> [369.699993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] hw state readout: disabled, pipe A

<7> [369.700918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] hw state readout: disabled, pipe A

<7> [369.701868] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] hw state readout: disabled, pipe A

<7> [369.702786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] hw state readout: disabled, pipe B

<7> [369.703729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] hw state readout: disabled, pipe B

<7> [369.704692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] hw state readout: disabled, pipe B

<7> [369.705628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] hw state readout: disabled, pipe B

<7> [369.706522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] hw state readout: disabled, pipe B

<7> [369.707269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] hw state readout: disabled, pipe B

<7> [369.708007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] hw state readout: disabled, pipe B

<7> [369.708811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] hw state readout: disabled, pipe B

<7> [369.709610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] hw state readout: disabled, pipe C

<7> [369.710341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] hw state readout: disabled, pipe C

<7> [369.711031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] hw state readout: disabled, pipe C

<7> [369.711740] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] hw state readout: disabled, pipe C

<7> [369.712456] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] hw state readout: disabled, pipe C

<7> [369.713160] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] hw state readout: disabled, pipe C

<7> [369.713885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] hw state readout: disabled, pipe C

<7> [369.714639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] hw state readout: disabled, pipe C

<7> [369.715372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [369.716070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [369.716738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST A] hw state readout: disabled, pipe A

<7> [369.717405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST B] hw state readout: disabled, pipe B

<7> [369.718041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:281:DP-MST C] hw state readout: disabled, pipe C

<7> [369.718790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI C (TC)/PHY C] hw state readout: disabled, pipe A

<7> [369.719558] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [369.720303] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [369.721031] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [369.721932] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:269:eDP-1] hw state readout: disabled

<7> [369.722705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:278:DP-1] hw state readout: disabled

<7> [369.723494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled

<7> [369.724306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:HDMI-A-2] hw state readout: disabled

<7> [369.724972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [369.725650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [369.726349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] min_cdclk 0 kHz

<7> [369.726975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] min_cdclk 0 kHz

<7> [369.727631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] min_cdclk 0 kHz

<7> [369.728321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] min_cdclk 0 kHz

<7> [369.728989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] min_cdclk 0 kHz

<7> [369.729709] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] min_cdclk 0 kHz

<7> [369.730395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] min_cdclk 0 kHz

<7> [369.731048] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] min_cdclk 0 kHz

<7> [369.731714] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] min_cdclk 0 kHz

<7> [369.732382] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] min_cdclk 0 kHz

<7> [369.733020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] min_cdclk 0 kHz

<7> [369.733726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] min_cdclk 0 kHz

<7> [369.734431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] min_cdclk 0 kHz

<7> [369.735082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] min_cdclk 0 kHz

<7> [369.735765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] min_cdclk 0 kHz

<7> [369.736458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] min_cdclk 0 kHz

<7> [369.737087] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] min_cdclk 0 kHz

<7> [369.737739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] min_cdclk 0 kHz

<7> [369.738404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] min_cdclk 0 kHz

<7> [369.739070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] min_cdclk 0 kHz

<7> [369.739787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] min_cdclk 0 kHz

<7> [369.740481] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] min_cdclk 0 kHz

<7> [369.741161] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] min_cdclk 0 kHz

<7> [369.741801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] min_cdclk 0 kHz

<7> [369.742453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] min_cdclk 0 kHz

<7> [369.743106] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:110:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [369.743811] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:188:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [369.744511] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:266:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [369.745186] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [369.745860] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [369.746540] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [369.802179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [setup_hw_state]

<7> [369.802747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [setup_hw_state]

<7> [369.803271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [setup_hw_state]

<7> [369.804505] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [369.805109] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [369.805735] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [369.806350] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [369.806993] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global

<7> [369.811494] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0

<7> [369.812251] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0

<7> [369.812883] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0

<7> [369.817849] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0

<7> [369.819707] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0

<7> [369.821642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0

<7> [369.854470] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [369.855107] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [369.855570] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [369.856249] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [369.857066] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [369.857814] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [369.858487] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 0: start 0x8

<7> [369.859016] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 1: start 0x108

<7> [369.859660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 2: start 0x208

<7> [369.860351] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 3: start 0x308

<7> [369.860997] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 4: start 0x3c8

<7> [369.861710] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 0: start 0x8

<7> [369.862405] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 1: start 0x108

<7> [369.863055] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 2: start 0x208

<7> [369.863725] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 3: start 0x308

<7> [369.864396] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 4: start 0x3c8

<7> [369.865031] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 0: start 0x8

<7> [369.865701] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 1: start 0x108

<7> [369.866397] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 2: start 0x208

<7> [369.867064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 3: start 0x308

<7> [369.867738] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 4: start 0x3c8

<7> [369.868869] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [369.869562] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [369.870236] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [369.870909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [fastset]

<7> [369.871619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [fastset]

<7> [369.872343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [fastset]

<7> [369.873481] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [369.875267] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:188:pipe B]

<7> [369.876642] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:266:pipe C]

<7> [369.877992] i915 0000:00:02.0: [drm:icl_sagv_post_plane_update [i915]] Relaxing QGV points: 0x3 -> 0x0

<7> [369.887225] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:269:eDP-1] adding connector to sysfs

<7> [369.891079] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:269:eDP-1] backlight device intel_backlight registered

<7> [369.891944] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:269:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [369.893624] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [369.900861] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:269:eDP-1] generating connector hotplug event

<7> [369.901086] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:278:DP-1] adding connector to sysfs

<7> [369.903573] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [369.907815] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:278:DP-1] generating connector hotplug event

<7> [369.908057] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs

<7> [369.909570] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event

<7> [369.909767] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-2] adding connector to sysfs

<7> [369.911226] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-2] generating connector hotplug event

<6> [369.911414] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [369.920000] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [369.986018] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [370.000526] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13

<7> [370.003952] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810)

<7> [370.011682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [370.012520] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:278:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [370.014174] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:110:pipe A] not active, skipping

<7> [370.014879] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:188:pipe B] not active, skipping

<7> [370.015569] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:266:pipe C] not active, skipping

<7> [370.016256] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [370.016919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [370.017608] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [370.018310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [370.018944] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [370.019672] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [370.021582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [370.021605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [370.022427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] status updated from unknown to disconnected

<7> [370.022462] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected

<7> [370.022497] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [370.024162] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:269:eDP-1] EDID changed, epoch counter 2

<7> [370.024220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [370.024241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [370.024991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [370.025015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [370.025031] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [370.025789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [370.025811] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [370.025825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [370.026555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [370.026573] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [370.026586] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no

<7> [370.026597] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [370.026608] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [370.026618] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [370.026696] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [370.026725] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [370.026879] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [370.026900] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [370.031239] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 11

<7> [370.032038] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: B0

<7> [370.032792] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [370.033510] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [370.034221] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [370.034912] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [370.035644] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [370.036368] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [370.037047] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [370.037810] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [370.038520] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [370.039201] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [370.039882] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [370.040590] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [370.041285] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [370.041946] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [370.042670] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [370.043374] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [370.044051] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: no

<7> [370.044735] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [370.045432] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes

<7> [370.046090] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 19200 kHz

<7> [370.047405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [370.047427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [370.048080] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected

<7> [370.048102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [370.048161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [370.048816] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [370.048836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [370.048851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [370.049562] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [370.049590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [370.049606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [370.050282] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [370.050303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [370.050316] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no

<7> [370.050327] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [370.050338] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [370.050348] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [370.050428] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [370.050462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [370.050614] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [370.050662] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [370.050979] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [370.053731] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [370.054785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [370.054546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [370.054830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [370.055527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] disconnected

<7> [370.055705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [370.056635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [370.056469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [370.056658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [370.057382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [370.057297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11

<7> [370.057766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [370.057852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 11

<7> [370.057788] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [370.058446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [370.058430] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 11

<7> [370.059077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [370.058972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0

<7> [370.059101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [370.059545] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: B0

<7> [370.059871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [370.060085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0

<7> [370.060458] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [370.060507] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? no

<7> [370.060520] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [370.060530] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [370.060540] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [370.060774] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [370.061396] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000

<7> [370.061963] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: JASPERLAKE

<7> [370.062539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 36

<7> [370.062888] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [370.062959] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [370.063091] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [370.063434] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [370.063488] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [370.063706] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [370.063671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [370.064238] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [370.064763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [370.065355] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [370.065909] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [370.066484] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [370.067028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [370.067585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [370.068109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [370.068666] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [370.069218] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [370.069757] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [370.070316] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [370.070843] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [370.071384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [370.071919] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [370.072488] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [370.073038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [370.073615] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [370.074155] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [370.074687] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [370.075239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes

<7> [370.075784] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [370.076336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [370.076861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [370.077402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [370.077930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [370.078505] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [370.079054] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [370.079622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [370.080166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [370.080701] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [370.081278] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [370.081804] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [370.082342] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no

<7> [370.082866] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [370.083429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [370.083982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [370.084555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [370.085100] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [370.085657] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [370.086223] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [370.086770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 4

<7> [370.087328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 4 subslices, mask=0000000f

<7> [370.087852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 16

<7> [370.088386] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 4

<7> [370.088921] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: yes

<7> [370.089492] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: yes

<7> [370.090045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [370.090617] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [370.113596] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [370.117206] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [370.121194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [370.123862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [370.127235] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<4> [371.153340] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000

<4> [372.156151] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000

<7> [372.177662] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off

<7> [372.178186] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [372.178583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [372.180720] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [372.181348] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [372.181934] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [372.183467] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<4> [373.162046] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...

<7> [373.165178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [373.166288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [373.167259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [373.168254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [373.169187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [373.170896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [381.207371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [381.212320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [381.213325] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [381.214388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [381.215034] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [381.215486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [381.226614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [381.252080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [381.266084] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [381.266655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [381.267076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [381.267477] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.268005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.268656] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.269286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [381.270399] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [381.270989] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [381.272466] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [381.274232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [381.274824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [381.283712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [381.285932] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [381.290151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [381.291318] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<6> [381.291690] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.291704] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.291710] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.292495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [381.293251] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [381.293864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<6> [381.300366] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.300386] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.300393] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [381.305974] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.305995] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.306001] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.306566] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [381.331038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<6> [381.336609] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [381.336635] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.336643] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [381.348122] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [381.348807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [381.349434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [381.350098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.350821] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.351475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.352134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [381.353302] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [381.353942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [381.355577] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [381.357324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [381.357962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [381.364627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [381.365105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [381.365746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [381.366302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [381.366866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [381.367393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<6> [381.368926] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.368940] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.368946] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.368888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [381.372375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [381.373642] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<6> [381.375009] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.375032] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.375039] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.375282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [381.375989] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [381.376573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [381.387538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [381.390969] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.390984] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.390990] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.534159] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [381.739135] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [381.758082] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [381.758844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [381.759391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [381.760008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.760739] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.761352] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [381.762014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [381.763124] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [381.763667] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [381.765146] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [381.766903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [381.767526] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [381.768908] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [381.768923] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.768929] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [381.776348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<6> [381.776839] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.776857] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.776862] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.776938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [381.777411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [381.778000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [381.778324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [381.778615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [381.779304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [381.780386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [381.781838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [381.782796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<6> [381.785455] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [381.785477] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [381.785483] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [381.825931] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [381.847278] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs

<7> [381.857941] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs

<7> [381.859121] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs

<7> [381.860181] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs

<7> [381.899731] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [381.901179] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [381.901932] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [381.912613] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [384.310563] Setting dangerous option force_probe - tainting kernel

<6> [384.334471] i915 0000:00:02.0: [drm] Found jasperlake (device ID 4e51) integrated display version 11.00 stepping B0

<7> [384.337721] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K

<7> [384.338702] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [384.339435] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Jasper Lake PCH

<7> [384.340128] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [384.340992] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [384.342090] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [384.342789] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 19200 kHz

<7> [384.344558] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0001, instances: 0001

<7> [384.345145] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0001, instances: 0001

<7> [384.346680] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [384.347285] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [384.348014] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [384.350199] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [384.350289] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x000000007fa000c7

<7> [384.351002] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [384.351689] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31783 MiB [mem 0x00000000-0x7c2707fff], io: n/a

<7> [384.352255] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 58 MiB [mem 0x7c000000-0x7f9fffff], io: n/a

<7> [384.353839] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x76b06018

<7> [384.354679] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [384.355316] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [384.356004] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [384.356701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [384.383468] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583

<7> [384.384032] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [384.384550] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [384.385775] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [384.386501] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no

<7> [384.387194] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [384.387930] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [384.388621] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 128 Gb, width: X8, ranks: 2, 16Gb+ DIMMs: no

<7> [384.389282] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [384.389987] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [384.390717] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [384.391414] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [384.392320] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR4

<7> [384.393023] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [384.393694] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 3

<7> [384.394326] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [384.394999] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2134 tRP=15 tRDPRE=8 tRAS=35 tRCD=15 tRC=50

<7> [384.395719] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=2401 tRP=17 tRDPRE=9 tRAS=39 tRCD=17 tRC=56

<7> [384.396435] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=2934 tRP=21 tRDPRE=12 tRAS=47 tRCD=21 tRC=68

<7> [384.397114] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 0: num_planes=4 deratedbw=9834

<7> [384.397802] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 1: num_planes=4 deratedbw=9878

<7> [384.398478] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW0 / QGV 2: num_planes=4 deratedbw=9941

<7> [384.399144] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 0: num_planes=2 deratedbw=14899

<7> [384.399804] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 1: num_planes=2 deratedbw=15583

<7> [384.400501] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW1 / QGV 2: num_planes=2 deratedbw=16488

<7> [384.401178] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 0: num_planes=1 deratedbw=20069

<7> [384.401888] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 1: num_planes=1 deratedbw=21483

<7> [384.402582] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW2 / QGV 2: num_planes=1 deratedbw=23719

<7> [384.403227] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 0: num_planes=1 deratedbw=24280

<7> [384.403886] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 1: num_planes=1 deratedbw=25000

<7> [384.404555] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW3 / QGV 2: num_planes=1 deratedbw=25000

<7> [384.405242] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 0: num_planes=1 deratedbw=25000

<7> [384.405961] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 1: num_planes=1 deratedbw=25000

<7> [384.406657] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW4 / QGV 2: num_planes=1 deratedbw=25000

<7> [384.407307] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 0: num_planes=1 deratedbw=25000

<7> [384.407980] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 1: num_planes=1 deratedbw=25000

<7> [384.408643] i915 0000:00:02.0: [drm:icl_get_bw_info.constprop.0.isra.0 [i915]] BW5 / QGV 2: num_planes=1 deratedbw=25000

<7> [384.410733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [384.411568] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT JASPERLAKE ", BDB version 236

<7> [384.412281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [384.413018] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [384.413744] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [384.414429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [384.415116] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 850)

<7> [384.415848] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 30, min size 34)

<7> [384.416579] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [384.417293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [384.418008] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366)

<7> [384.418698] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 273, min size 305)

<7> [384.419355] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 136)

<7> [384.420060] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [384.420806] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [384.421507] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [384.422176] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [384.422855] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [384.423542] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [384.424198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [384.424887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [384.425593] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [384.426272] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [384.426955] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [384.427647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [384.428281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [384.428944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 0

<7> [384.429651] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 0a

<7> [384.430429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [384.431433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [384.432176] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [384.432881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [384.433755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [384.434445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [384.435137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [384.435990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [384.436707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [384.437573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [384.439357] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/icl_dmc_ver1_09.bin

<7> [384.442613] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [384.443359] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x5fc0

<7> [384.443744] i915 0000:00:02.0: [drm:intel_bw_init [i915]] Forcing SAGV disable: mask 0x3

<7> [384.444094] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xa40088 (EVT_HTP)

<7> [384.444883] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [384.445925] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [384.447632] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us

<6> [384.448121] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9)

<7> [384.448323] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [384.449010] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 20 (20.0 usec)

<7> [384.449676] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 20 (20.0 usec)

<7> [384.450319] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 20 (20.0 usec)

<7> [384.451017] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 30 (30.0 usec)

<7> [384.451720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 73 (73.0 usec)

<7> [384.452398] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 133 (133.0 usec)

<7> [384.453056] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 140 (140.0 usec)

<7> [384.453720] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [384.454358] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 22 (22.0 usec)

<7> [384.455005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 22 (22.0 usec)

<7> [384.455699] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 22 (22.0 usec)

<7> [384.456388] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 32 (32.0 usec)

<7> [384.457066] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 75 (75.0 usec)

<7> [384.457729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 135 (135.0 usec)

<7> [384.458394] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 142 (142.0 usec)

<7> [384.500660] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [384.521295] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [384.522128] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 556800 kHz

<7> [384.522883] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1113600 kHz

<7> [384.523737] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:268:DDI A/PHY A] Using AUX CH A (VBT)

<7> [384.524553] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:268:DDI A/PHY A]

<7> [384.545393] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [384.546132] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [384.546838] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [384.547724] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [384.548479] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [384.549162] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [384.549854] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [384.550552] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [384.551198] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [384.551901] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [384.552843] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:268:DDI A/PHY A] initial power sequencer: PPS 0

<7> [384.553624] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [384.554281] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [384.554965] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [384.555630] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [384.556243] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [384.557027] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [384.557973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [384.558994] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [384.559722] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [384.560449] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [384.570419] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [384.571096] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [384.571685] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [384.778183] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [384.779659] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 00-22-b9 dev-ID sivarT HW-rev 0.0 SW-rev 0.0 quirks 0x0001

<7> [384.780938] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 b7 f6 00 00

<7> [384.783611] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [384.792449] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.794539] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.797534] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.799549] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.801627] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.803654] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.805682] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.808650] i915 0000:00:02.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX A/DDI A/PHY A: native defer

<7> [384.810492] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [384.810522] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [384.810540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [384.810805] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [384.811978] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:269:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [384.813097] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:269:eDP-1] Performing OUI wait (30 ms)

<7> [384.814775] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:269:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [384.815853] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:269:eDP-1] DRRS type: none

<7> [384.817196] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:269:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [384.818321] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:269:eDP-1] backlight initialized, disabled, brightness 0/96000

<7> [384.819740] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [384.820784] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [384.821830] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [384.822854] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [384.823897] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [384.825054] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [384.826985] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:277:DDI B/PHY B] Using AUX CH B (VBT)

<7> [384.828264] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:277:DDI B/PHY B]

<7> [384.830918] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [384.832123] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:277:DDI B/PHY B]

<7> [384.833191] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:277:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [384.835194] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:292:DDI C (TC)/PHY C]

<7> [384.836242] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:292:DDI C (TC)/PHY C] Using DDC pin 0x3 (VBT)

<7> [384.838487] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [384.839600] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [384.840896] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] hw state readout: disabled

<7> [384.842899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] hw state readout: disabled

<7> [384.844890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] hw state readout: disabled

<7> [384.846113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [384.847188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] hw state readout: disabled, pipe A

<7> [384.848193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] hw state readout: disabled, pipe A

<7> [384.849192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] hw state readout: disabled, pipe A

<7> [384.850271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] hw state readout: disabled, pipe A

<7> [384.851322] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] hw state readout: disabled, pipe A

<7> [384.852372] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] hw state readout: disabled, pipe A

<7> [384.853395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] hw state readout: disabled, pipe A

<7> [384.854200] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] hw state readout: disabled, pipe B

<7> [384.855069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] hw state readout: disabled, pipe B

<7> [384.855939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] hw state readout: disabled, pipe B

<7> [384.856811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] hw state readout: disabled, pipe B

<7> [384.857651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] hw state readout: disabled, pipe B

<7> [384.858493] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] hw state readout: disabled, pipe B

<7> [384.859292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] hw state readout: disabled, pipe B

<7> [384.860221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] hw state readout: disabled, pipe B

<7> [384.861007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] hw state readout: disabled, pipe C

<7> [384.861751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] hw state readout: disabled, pipe C

<7> [384.862467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] hw state readout: disabled, pipe C

<7> [384.863165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] hw state readout: disabled, pipe C

<7> [384.863874] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] hw state readout: disabled, pipe C

<7> [384.864581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] hw state readout: disabled, pipe C

<7> [384.865262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] hw state readout: disabled, pipe C

<7> [384.866015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] hw state readout: disabled, pipe C

<7> [384.866769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [384.867513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [384.868161] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST A] hw state readout: disabled, pipe A

<7> [384.868822] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST B] hw state readout: disabled, pipe B

<7> [384.869474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:281:DP-MST C] hw state readout: disabled, pipe C

<7> [384.870154] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI C (TC)/PHY C] hw state readout: disabled, pipe A

<7> [384.870894] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [384.871674] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [384.872426] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [384.873293] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:269:eDP-1] hw state readout: disabled

<7> [384.874055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:278:DP-1] hw state readout: disabled

<7> [384.874811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled

<7> [384.875579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:HDMI-A-2] hw state readout: disabled

<7> [384.876251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [384.876953] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:plane 2A] min_cdclk 0 kHz

<7> [384.877619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:54:plane 3A] min_cdclk 0 kHz

<7> [384.878272] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 4A] min_cdclk 0 kHz

<7> [384.878930] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:74:plane 5A] min_cdclk 0 kHz

<7> [384.879589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:84:plane 6A] min_cdclk 0 kHz

<7> [384.880217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 7A] min_cdclk 0 kHz

<7> [384.880910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:104:cursor A] min_cdclk 0 kHz

<7> [384.881629] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:110:pipe A] min_cdclk 0 kHz

<7> [384.882295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:112:plane 1B] min_cdclk 0 kHz

<7> [384.882962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:122:plane 2B] min_cdclk 0 kHz

<7> [384.883637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:132:plane 3B] min_cdclk 0 kHz

<7> [384.884260] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 4B] min_cdclk 0 kHz

<7> [384.884899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 5B] min_cdclk 0 kHz

<7> [384.885585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:162:plane 6B] min_cdclk 0 kHz

<7> [384.886249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:172:plane 7B] min_cdclk 0 kHz

<7> [384.886952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:cursor B] min_cdclk 0 kHz

<7> [384.887640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:188:pipe B] min_cdclk 0 kHz

<7> [384.888296] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:190:plane 1C] min_cdclk 0 kHz

<7> [384.888956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:200:plane 2C] min_cdclk 0 kHz

<7> [384.889614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:210:plane 3C] min_cdclk 0 kHz

<7> [384.890241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 4C] min_cdclk 0 kHz

<7> [384.890957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:230:plane 5C] min_cdclk 0 kHz

<7> [384.891652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:240:plane 6C] min_cdclk 0 kHz

<7> [384.892437] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:250:plane 7C] min_cdclk 0 kHz

<7> [384.893090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:260:cursor C] min_cdclk 0 kHz

<7> [384.893759] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:266:pipe C] min_cdclk 0 kHz

<7> [384.894421] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:110:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [384.895052] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:188:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [384.895713] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:266:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [384.896399] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [384.897092] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [384.897791] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [384.952463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [setup_hw_state]

<7> [384.953016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [setup_hw_state]

<7> [384.953560] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [setup_hw_state]

<7> [384.954719] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [384.955323] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [384.955937] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [384.956726] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [384.957442] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 GT workarounds on global

<7> [384.962193] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 engine workarounds on rcs'0

<7> [384.962939] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on rcs'0

<7> [384.963597] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 9 context workarounds on rcs'0

<7> [384.968390] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on bcs'0

<7> [384.970332] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 4 whitelist workarounds on vcs'0

<7> [384.972199] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 whitelist workarounds on vecs'0

<7> [385.005291] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [385.005950] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [385.006447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [385.007074] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [385.007938] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [385.008675] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [385.009271] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 0: start 0x8

<7> [385.009926] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 1: start 0x108

<7> [385.010627] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 2: start 0x208

<7> [385.011263] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 3: start 0x308

<7> [385.011937] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:110:pipe A] FQ 4: start 0x3c8

<7> [385.012632] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 0: start 0x8

<7> [385.013295] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 1: start 0x108

<7> [385.013986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 2: start 0x208

<7> [385.014668] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 3: start 0x308

<7> [385.015298] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:188:pipe B] FQ 4: start 0x3c8

<7> [385.015961] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 0: start 0x8

<7> [385.016636] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 1: start 0x108

<7> [385.017298] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 2: start 0x208

<7> [385.017990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 3: start 0x308

<7> [385.018672] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:266:pipe C] FQ 4: start 0x3c8

<7> [385.019809] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [385.020585] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [385.021235] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [385.021952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [fastset]

<7> [385.022666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:188:pipe B] enable: no [fastset]

<7> [385.023326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:266:pipe C] enable: no [fastset]

<7> [385.024419] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [385.026187] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:188:pipe B]

<7> [385.027597] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:266:pipe C]

<7> [385.028912] i915 0000:00:02.0: [drm:icl_sagv_post_plane_update [i915]] Relaxing QGV points: 0x3 -> 0x0

<7> [385.038486] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:269:eDP-1] adding connector to sysfs

<7> [385.041334] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:269:eDP-1] backlight device intel_backlight registered

<7> [385.042162] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:269:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [385.043758] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [385.048245] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:269:eDP-1] generating connector hotplug event

<7> [385.048494] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:278:DP-1] adding connector to sysfs

<7> [385.050588] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [385.059067] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:278:DP-1] generating connector hotplug event

<7> [385.059280] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs

<7> [385.061033] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event

<7> [385.061239] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:HDMI-A-2] adding connector to sysfs

<7> [385.068163] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:HDMI-A-2] generating connector hotplug event

<6> [385.068329] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [385.078288] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [385.141866] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [385.155682] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14

<7> [385.161599] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x810 (init value 0x810)

<7> [385.168910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.171266] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:110:pipe A] not active, skipping

<7> [385.172066] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:188:pipe B] not active, skipping

<7> [385.172802] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:266:pipe C] not active, skipping

<7> [385.173505] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [385.174443] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:278:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [385.175172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.180147] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [385.180883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.186431] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [385.188396] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [385.191039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [385.191067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [385.193394] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [385.194131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [385.194868] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [385.195620] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [385.195641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [385.195653] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [385.195719] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [385.196447] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [385.197097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [385.200656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] status updated from unknown to connected

<7> [385.201018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [385.201034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.201049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [385.201066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.201081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.202378] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [385.206049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.206081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.206098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.211176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.211210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.211227] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.216231] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [385.216261] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes

<7> [385.216275] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [385.216286] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [385.216296] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [385.216393] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [385.216444] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800

<7> [385.216457] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [385.216498] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0)

<7> [385.216668] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [385.216741] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [385.239056] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00100000

<6> [385.242759] Console: switching to colour frame buffer device 200x56

<6> [385.242792] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [385.242814] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 11

<7> [385.243661] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: B0

<7> [385.244484] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [385.245158] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [385.245859] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [385.246551] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [385.247227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [385.247961] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [385.248708] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [385.249436] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [385.250121] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [385.250846] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [385.251553] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [385.252227] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [385.252919] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [385.253610] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [385.254283] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [385.254982] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [385.255715] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: no

<7> [385.256411] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [385.257084] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes

<7> [385.257784] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 19200 kHz

<7> [385.258867] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [385.260571] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [385.260616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [385.262127] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [385.262852] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [385.263539] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [385.264780] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [385.264802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [385.264829] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [385.264937] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [385.265646] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [385.266303] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [385.270745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [385.270787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.270802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [385.270820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.270835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.275610] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [385.276594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.276624] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.276641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.277450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [385.279762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [385.280626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [385.281590] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.281620] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.281637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.282644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x4e51 rev=0x01 platform=JASPERLAKE (subplatform=0x0) gen=11

<7> [385.283187] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 11

<7> [385.283751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 11

<7> [385.284284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0

<7> [385.284848] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: B0

<7> [385.285418] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0

<7> [385.285949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [385.286504] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000

<7> [385.287039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: JASPERLAKE

<7> [385.287605] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 36

<7> [385.288142] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [385.288729] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [385.289271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [385.289848] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [385.290402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [385.290942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [385.291509] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [385.292061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [385.292628] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [385.293181] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [385.293752] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [385.294289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [385.294883] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [385.295444] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [385.295974] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [385.296511] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [385.297025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [385.297578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [385.298108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [385.298672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [385.299207] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [385.299776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [385.300344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes

<7> [385.300885] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [385.301441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [385.301973] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [385.302539] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [385.303066] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [385.303631] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [385.304173] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [385.304746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [385.305277] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [385.305852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [385.306443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [385.306986] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [385.307555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no

<7> [385.308188] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [385.308759] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [385.309306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [385.309854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [385.310420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [385.310976] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [385.311573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [385.312134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 4

<7> [385.312709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 4 subslices, mask=0000000f

<7> [385.313256] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 16

<7> [385.313839] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 4

<7> [385.314416] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: yes

<7> [385.314953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: yes

<7> [385.315489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [385.316031] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [385.316169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [385.316195] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes

<7> [385.316209] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [385.316221] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [385.316231] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [385.316952] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [385.317038] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800

<7> [385.317051] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [385.317182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0)

<7> [385.320169] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [385.321100] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [385.321830] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000

<7> [385.322569] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long

<7> [385.323233] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met

<7> [385.323970] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [385.324712] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A]

<7> [385.325419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [385.326124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [385.326856] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [385.327571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [385.328254] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288)

<7> [385.328953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [385.329649] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [385.330315] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [385.331001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316)

<7> [385.331703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [385.332407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316)

<7> [385.333089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [385.333790] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [385.334482] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [385.335160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [385.335859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802)

<7> [385.336561] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807)

<7> [385.337244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816)

<7> [385.337933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816)

<7> [385.338628] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [385.339303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316)

<7> [385.340042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [385.340804] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316)

<7> [385.341509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [385.342185] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [385.342909] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [385.343629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [385.344349] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802)

<7> [385.345042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807)

<7> [385.345774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816)

<7> [385.346481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816)

<7> [385.347166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [385.347883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [385.348506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [385.349092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [385.349689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dpll_hw_state

<7> [385.350255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [385.350847] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [385.351493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [385.352071] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [385.352670] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [385.353241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310)

<7> [385.353846] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310)

<7> [385.354437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [385.355018] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [385.357406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1

<7> [385.358057] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969

<7> [385.358646] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55

<7> [385.359195] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm

<7> [385.359766] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0

<7> [385.360335] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0

<7> [385.360884] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0

<7> [385.361830] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1

<7> [385.362483] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446

<7> [385.363055] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446

<7> [385.363657] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446

<7> [385.364685] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz

<7> [385.365662] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz

<7> [385.366267] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [385.366884] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [385.367475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [385.368051] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0

<7> [385.368672] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0

<7> [385.369264] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset]

<7> [385.369906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [385.370503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [385.371088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [385.371669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [385.372456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [385.373025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [385.373637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64

<7> [385.374209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [385.374820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [385.375417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [385.375996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [385.376606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [385.377173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [385.377781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [385.378363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [385.378925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0

<7> [385.379504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816

<7> [385.380059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [385.380651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.381236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.381827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [385.382413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa

<7> [385.382975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [385.383568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655

<7> [385.384135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0

<7> [385.384730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [385.385297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [385.385884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [385.386469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [385.387037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [385.387632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [385.388186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [385.388765] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.389336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.389892] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.390464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [385.391040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [385.391613] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.392168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.392743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [385.393300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [385.393902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [385.394489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [385.395052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [385.395645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [385.396207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [385.396779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [385.397360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [385.397923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [385.398513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [385.399069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [385.399667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [385.401470] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1

<7> [385.402923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [385.403521] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [385.404182] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [385.404786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [385.405377] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [385.405942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [385.407459] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A]

<7> [385.408096] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [385.410180] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on

<7> [385.411221] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<6> [385.412125] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [385.411905] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [385.423378] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [385.424004] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on

<7> [385.424669] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [385.638680] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [385.639819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [385.645229] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [385.645388] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [385.647450] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [385.648554] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [385.651992] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [385.652913] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [385.655372] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK

<7> [385.656231] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [385.658935] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1

<7> [385.659813] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1

<7> [385.662852] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [385.663784] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [385.862524] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [385.864323] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [385.864774] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [385.865537] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259

<7> [385.877487] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1

<7> [385.877962] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [385.881464] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [385.882106] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [385.883637] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [385.887418] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [385.888101] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [385.888161] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [385.888370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [385.888392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [385.889669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [385.889958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [385.890243] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [385.890855] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [385.890981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [385.892994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [385.893016] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [385.893027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [385.893078] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [385.893800] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [385.894391] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [385.896863] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x810

<7> [385.901356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [385.901381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.901396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [385.901414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.901430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.906205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.906245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.906262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.911168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.911207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.911223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.916122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [385.916157] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] enabled? yes

<7> [385.916171] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:278:DP-1] enabled? no

<7> [385.916182] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no

<7> [385.916192] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:HDMI-A-2] enabled? no

<7> [385.916274] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [385.916421] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:269:eDP-1] found preferred mode: 3200x1800

<7> [385.916436] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [385.916506] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:110:pipe A] desired mode 3200x1800 set (0,0)

<7> [385.916526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [385.916635] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [385.916550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [385.917956] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [385.918597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [385.919131] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [385.920006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [385.920027] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [385.920038] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [385.920090] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [385.920658] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [385.921186] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [385.924972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [385.924997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.925011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [385.925202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.925218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.930048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.930235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.930251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.935023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.935218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.935234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.940093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [385.955465] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.955485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.960034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.961025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.961044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.965831] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.966819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.966837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.971626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<7> [385.973036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1]

<7> [385.973057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:269:eDP-1]

<7> [385.973762] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [385.974319] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [385.974846] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [385.975465] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [385.975483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD monitor

<7> [385.975493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:269:eDP-1] ELD size 20, SAD count 0

<7> [385.975546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] VRR capable: no

<7> [385.976072] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [385.976615] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:269:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [385.978348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:269:eDP-1] probed modes:

<7> [385.978369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [385.978383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [385.978459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1]

<7> [385.978475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [385.983188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:278:DP-1] disconnected

<7> [385.983264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1]

<7> [385.983281] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [385.988083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected

<7> [385.988167] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2]

<7> [385.988183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [385.992947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:HDMI-A-2] disconnected

<4> [386.929373] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000

<4> [387.930274] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000

<6> [387.937336] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [387.937351] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [387.937387] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<4> [388.935496] snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...

<7> [388.938808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [388.939907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<6> [388.941272] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [388.941298] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [388.941308] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [388.951462] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [388.951489] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [388.951495] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [390.290235] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD off

<7> [390.291237] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067

<7> [390.292188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [390.293238] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [390.293845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [397.115719] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:110:pipe A]

<7> [397.116175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [397.117198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [397.118168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [397.118777] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [397.119361] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [397.119940] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [397.120528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [397.121119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [397.121671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [397.122248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [397.122814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [397.123358] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [397.123945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [397.124500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [397.125097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [397.125661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [397.126273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [397.126864] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [397.127417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [397.127990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [397.128540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [397.129104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [397.129657] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [397.130259] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [397.130832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [397.131385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [397.131959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [397.132511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [397.133078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [397.133627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<7> [397.134191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [397.134743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [397.135331] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [397.135918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [397.136474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [397.137052] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [397.137607] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [397.138179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [397.138727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [397.139298] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [397.139871] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0

<6> [397.140510] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.140528] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.140535] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [397.140606] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 (no details found

<7> [397.140694] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [397.141389] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0

<7> [397.141946] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0

<7> [397.142481] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [397.143036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [397.143569] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [397.144110] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [397.144707] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0

<7> [397.145303] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [397.145887] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [397.146441] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [397.147084] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz

<7> [397.147697] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz

<7> [397.148354] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [397.148926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [397.149466] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [397.150075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset]

<7> [397.150652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [397.151257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [397.151836] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [397.152388] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [397.152958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [397.153513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [397.154075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [397.154621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<6> [397.155293] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.155312] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.155318] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [397.155387] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 (no details found

<7> [397.155629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [397.156770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [397.173854] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<6> [397.278569] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.278608] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.278619] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [397.383152] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0

<7> [397.384928] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [397.400181] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [397.401222] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [397.403886] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off

<7> [397.404855] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [397.406110] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [397.406183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [397.407045] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [397.408197] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [397.410204] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [397.426485] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [397.427460] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [397.428335] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [397.429192] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<6> [397.432810] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.432829] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.432836] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [397.459926] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [397.460856] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [397.461722] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [397.462671] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [397.466851] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [397.468261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [397.469876] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A]

<7> [397.471121] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [397.472079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<6> [397.473460] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.473485] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.473496] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [397.473532] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<7> [397.473102] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<4> [397.473547] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)

<4> [397.473556] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000

<7> [397.474625] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [397.476206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [397.477233] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [397.478152] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [397.479053] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [397.479939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [397.480842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [397.481699] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [397.483160] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [397.486193] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:188:pipe B]

<7> [397.487021] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:266:pipe C]

<6> [397.493956] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.493987] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.493996] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<6> [397.497390] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [397.497405] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.497412] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [397.591303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [397.593015] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [397.593990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [397.595702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [397.597966] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [397.602875] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [397.603820] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4

<4> [397.604189] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [397.604200] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000

<7> [397.604329] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [397.606058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [397.607221] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [397.608170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [397.629864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [397.701397] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:269:eDP-1] Limiting target display pipe bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [397.702531] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:268:DDI A/PHY A][CRTC:110:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [397.703500] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 HDR no link rate required 1083930 available 2160000

<7> [397.704482] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long

<7> [397.705811] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met

<7> [397.706831] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [397.707825] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:268:DDI A/PHY A] [CRTC:110:pipe A]

<7> [397.708683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [397.709616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [397.710557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [397.711596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [397.712549] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288)

<7> [397.713491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [397.714533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [397.715464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [397.716392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316)

<7> [397.717329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [397.718264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316)

<7> [397.719200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [397.720132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [397.721090] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [397.722018] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [397.722926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802)

<7> [397.723853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807)

<7> [397.724796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816)

<7> [397.725708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816)

<7> [397.726633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [397.727558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316)

<7> [397.728477] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [397.729401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316)

<7> [397.730366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [397.731305] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [397.732236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [397.733160] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [397.734097] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802)

<7> [397.735019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807)

<7> [397.735932] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816)

<7> [397.736853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816)

<7> [397.737785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [397.738681] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [397.739613] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [397.740544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [397.741466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [397.742386] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310)

<7> [397.743311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310)

<7> [397.744237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [397.745173] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [397.746277] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1

<7> [397.747220] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969

<7> [397.748116] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55

<7> [397.748988] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm

<7> [397.749865] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0

<7> [397.750763] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0

<7> [397.751632] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0

<7> [397.752648] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 1445240 num active planes 1

<7> [397.753593] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446

<7> [397.754513] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446

<7> [397.755430] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446

<7> [397.756449] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 0 kHz -> 180655 kHz

<7> [397.757473] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz

<7> [397.758438] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [397.759369] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [397.760194] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [397.761013] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:110:pipe A] allocated DPLL 0

<7> [397.761829] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:110:pipe A] reserving DPLL 0

<7> [397.762650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: yes [modeset]

<7> [397.763490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [397.764327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [397.765165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [397.765991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [397.766679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [397.767292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [397.767910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64

<7> [397.768501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [397.769121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [397.769755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [397.770356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [397.770975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [397.771572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [397.772212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [397.772820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [397.773425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0

<7> [397.773990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816

<7> [397.774548] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [397.775137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [397.775698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [397.776276] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [397.776855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa

<7> [397.777400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [397.777965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655

<7> [397.778515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0

<7> [397.779083] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [397.779640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [397.780231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [397.780803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [397.781358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [397.781937] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [397.782492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [397.783054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.783601] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.784166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.784740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [397.785297] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [397.785888] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.786445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.787024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [397.787572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [397.788139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [397.788691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:270] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [397.789274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [397.789853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [397.790410] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [397.790989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [397.791541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [397.792115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [397.792664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [397.793226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [397.793791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [397.805998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [397.819230] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [397.819802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [397.820515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [397.821162] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [397.821833] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [397.822451] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [397.823116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [397.824237] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 50000 kHz, VCO 0 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [397.824821] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [397.825429] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [397.827149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [397.827753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [397.836026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [397.836632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [397.837667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [397.838645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [397.839893] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1

<7> [397.841060] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [397.841610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [397.842199] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [397.842763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [397.843310] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [397.843871] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [397.844683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [397.845322] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:110:pipe A]

<7> [397.845931] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [397.847928] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power on

<7> [397.848931] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining)

<7> [397.974880] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [398.064772] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [398.065429] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power on

<7> [398.066246] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [398.126076] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [398.127010] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [398.127876] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [398.128828] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [398.281209] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [398.282415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [398.284743] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turning VDD on

<7> [398.285775] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [398.290154] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [398.290282] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [398.292380] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [398.293516] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [398.295794] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [398.296634] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [398.299115] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Clock recovery OK

<7> [398.300079] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [398.302740] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1

<7> [398.303597] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1

<7> [398.306415] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [398.307308] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:269:eDP-1][ENCODER:268:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [398.505741] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [398.507752] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [398.508316] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [398.509438] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 2259

<7> [398.521857] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1

<7> [398.522388] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A]

<7> [398.540996] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [398.541549] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [398.544437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:278:DP-1]

<7> [398.545355] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [398.549233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1]

<7> [398.554052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:293:HDMI-A-2]

<7> [398.744520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [398.746183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [398.747661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [398.752984] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:270] is removed

<7> [398.753161] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0

<7> [398.753857] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [398.754433] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.755025] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.755577] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.756319] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:110:pipe A] data rate 0 num active planes 0

<7> [398.756920] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [398.757480] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [398.758439] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [398.773846] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A]

<7> [398.794459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [398.795506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [398.796492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [398.797727] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [398.798644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [398.799650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [398.800597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [398.801562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [398.802509] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [398.803533] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [398.804496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [398.805505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [398.806481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [398.807421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.808352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [398.809340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [398.810199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [398.811014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [398.811830] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [398.812798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [398.813606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [398.814449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [398.815274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [398.816103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [398.816810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [398.817451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.818127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [398.818818] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [398.819473] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [398.820158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<7> [398.820832] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [398.821480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [398.822151] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [398.822822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [398.823481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [398.824095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [398.824659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [398.825246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [398.825817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:110:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [398.826373] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:110:pipe A] fastset requirement not met, forcing full modeset

<7> [398.826940] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:110:pipe A] releasing DPLL 0

<7> [398.827587] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:110:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [398.828326] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:104:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0

<7> [398.829023] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:110:pipe A] min cdclk: 180655 kHz -> 0 kHz

<7> [398.829594] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [398.830181] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [398.830759] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [398.831323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:110:pipe A] enable: no [modeset]

<7> [398.831895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [398.832448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:44:plane 2A] fb: [NOFB], visible: no

<7> [398.833016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:54:plane 3A] fb: [NOFB], visible: no

<7> [398.833572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 4A] fb: [NOFB], visible: no

<7> [398.834158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:74:plane 5A] fb: [NOFB], visible: no

<7> [398.834735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:84:plane 6A] fb: [NOFB], visible: no

<7> [398.835287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 7A] fb: [NOFB], visible: no

<7> [398.835868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:104:cursor A] fb: [NOFB], visible: no

<7> [398.848827] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [399.054999] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:269:eDP-1] set backlight PWM = 0

<7> [399.059505] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [399.076040] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 turn panel power off

<7> [399.077035] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [399.077996] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [399.078922] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [399.079812] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [399.080762] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [399.080881] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [399.098321] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [399.099310] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [399.100208] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [399.101161] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [399.132229] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [399.132962] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [399.133230] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:268:DDI A/PHY A] - long

<7> [399.134118] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [399.134415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [399.137871] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:268:DDI A/PHY A]

<7> [399.139288] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:110:pipe A]

<7> [399.140728] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [399.141712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [399.142752] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [399.144416] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:268:DDI A/PHY A]

<7> [399.145492] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DDI B/PHY B]

<7> [399.146404] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST A]

<7> [399.147316] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST B]

<7> [399.148208] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:281:DP-MST C]

<7> [399.149109] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI C (TC)/PHY C]

<7> [399.150004] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:269:eDP-1]

<7> [399.151528] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:110:pipe A]

<7> [399.207349] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [399.231565] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:269:eDP-1] removing connector from sysfs

<7> [399.244542] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:278:DP-1] removing connector from sysfs

<7> [399.248295] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:287:HDMI-A-1] removing connector from sysfs

<7> [399.249945] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:293:HDMI-A-2] removing connector from sysfs

<7> [399.282137] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [399.283416] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 wait for panel power cycle (351 ms remaining)

<7> [399.639092] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:268:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [399.742866] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [400.530313] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

Results for igt@i915_pm_rpm@module-reload