Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g07ca77c0e (x86_64) (Linux: 6.19.0-CI_DRM_17992-geac0d1b8d00b+ x86_64)
Out 
Using IGT_SRANDOM=1771118766 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.029s)
Dmesg
<6> [241.051958] Console: switching to colour dummy device 80x25
<6> [241.052907] [IGT] kms_force_connector_basic: executing
<7> [241.416328] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.417141] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [241.417724] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.418633] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [241.418647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.418657] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.418947] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.419207] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.419686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.419955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.420382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.420695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.420703] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.420960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.422298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.422306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.422602] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.422924] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.422994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.423003] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.423267] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.423547] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.424027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.424281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.424788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.425069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.425076] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.425332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.426682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.426691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.426949] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.427207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.427305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.427312] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.427643] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.427946] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.428411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.428699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.429114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.429399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.429407] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.429704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.431009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.431018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.431275] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.431560] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [241.432449] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [241.432957] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [241.432970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.432980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [241.433003] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [241.433100] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [241.433329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.433790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.434428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.434831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.434854] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.435252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.437063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.437087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.437727] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [241.437741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.437753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.437765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.437775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.437786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.437881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.438097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.438527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.439095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.439508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.439530] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.439926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.441653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.441677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.442222] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [241.442234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.442246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.442257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.442267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.442278] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.442739] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [241.442792] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.442879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [241.442888] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [241.443182] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [241.443202] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [241.443220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [241.443229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [241.443239] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [241.443250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [241.443259] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.443270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.443280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.443647] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set
<7> [241.443708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.443784] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD monitor IGT
<7> [241.443793] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0
<7> [241.443802] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 56
<7> [241.444072] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [241.444090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [241.444099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [241.444109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [241.444119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.444129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.444140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.444428] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [241.444485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.444701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.445126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.445719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.446114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.446136] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.446554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.448436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.448460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.449002] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [241.449025] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [241.449042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] probed modes:
<7> [241.449053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [241.449064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [241.449074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [241.449084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [241.449094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [241.449599] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing
<7> [241.449614] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.449626] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.450046] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.450479] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.451088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.451511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.452083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.452529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.452541] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.452934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.454717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.454730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.455132] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.455576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [241.455599] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.455617] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [241.455759] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [241.455905] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:76:VGA-1] EDID changed, epoch counter 58
<7> [241.456047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.456060] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.456492] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.456878] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.457423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.457821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.458427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.458814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.458826] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.459217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.460923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.460937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.461341] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.461838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<6> [241.463146] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [241.464004] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [241.465118] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:72:LVDS-1] force updated from 0 to 0 or reprobing
<7> [241.465134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [241.465154] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [241.465164] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [241.465294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [241.465304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.465383] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [241.465396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [241.465404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [241.465514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [241.465523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.465776] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:LVDS-1] EDID override reset
<7> [241.465824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [241.465837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [241.465845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [241.465956] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [241.465965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.466395] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [241.466408] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.466419] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.466856] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.467223] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.467732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.467994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.468576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.468842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.468850] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.469108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.470589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.470602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.470869] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.471128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.471206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.471214] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.471509] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.471803] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.472229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.472530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.472983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.473237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.473243] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.473520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.474850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.474858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.475111] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.475413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.475663] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [241.475697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.475705] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.475979] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.476235] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.476683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.476941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.477388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.477680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.477687] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.477943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.479227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.479235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.479519] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.479799] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.480105] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [241.480115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [241.480122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [241.531882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.547431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.547447] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.547866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.564411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.564423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.564699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [241.564778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [241.564786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [241.616414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.632424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.632438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.632740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.648411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.648421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.648679] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [241.648894] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [241.648926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [241.648933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [241.700998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.717401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.717420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.717674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.733417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.733431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.733713] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [241.733959] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [241.733991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [241.733998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [241.738274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [241.738658] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:92:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [241.738668] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [241.738676] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [241.739131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.739421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.739877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.740133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.740140] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.740430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.741802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.741810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.742070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [241.742133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [241.742140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [241.742616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.742903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.743319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.743599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.743605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.743892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.745233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.745241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.745564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [241.745811] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:92:HDMI-A-2] EDID override reset
<7> [241.745845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [241.745853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [241.746287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.746568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.747025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.747279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.747285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.747586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.748910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.748917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.749174] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [241.749536] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:96:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [241.749547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [241.749554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [241.749981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.750235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.750710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.750985] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.750992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.751242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.752579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.752588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.752848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [241.752907] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [241.752915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [241.753371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.753677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.754109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.754455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.754467] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.754788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.756118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.756129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.756473] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [241.756730] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:96:HDMI-A-3] EDID override reset
<7> [241.756764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [241.756771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [241.757263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.757559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.758044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.758303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.758310] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.758630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.759924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.759932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.760191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [241.760464] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:DP-2] EDID override reset
<7> [241.760499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [241.760507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [241.764793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [241.765107] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:DP-3] EDID override reset
<7> [241.765154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [241.765165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [241.769659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<6> [241.771952] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [241.772809] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [241.776861] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [241.776881] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [241.777043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1]
<7> [241.777069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD monitor
<7> [241.777082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:72:LVDS-1] ELD size 20, SAD count 0
<7> [241.777241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:72:LVDS-1] probed modes:
<7> [241.777254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [241.777269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1]
<7> [241.777282] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [241.777939] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [241.778819] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [241.780447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.780857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [241.781400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [241.781797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.781809] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.782205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [241.784194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [241.784206] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [241.784637] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [241.785064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:76:VGA-1] disconnected
<7> [241.785082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1]
<7> [241.785101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [241.836959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [241.853409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.853431] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.853709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [241.869388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [241.869398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [241.869655] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [241.869666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1]
<7> [241.869674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [241.873937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:87:DP-1] disconnected
<7> [241.873953] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2]
<7> [241.873961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:92:HDMI-A-2]
<7> [241.874413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.874707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [241.875121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [241.875420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.875428] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.875679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [241.877007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [241.877015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [241.877275] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:HDMI-A-2] disconnected
<7> [241.877285] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3]
<7> [241.877292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:96:HDMI-A-3]
<7> [241.877775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.878040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [241.878456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [241.878724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.878731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [241.878983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [241.880609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [241.880626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [241.881056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:96:HDMI-A-3] disconnected
<7> [241.881072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2]
<7> [241.881083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:100:DP-2]
<7> [241.885564] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:100:DP-2] disconnected
<7> [241.885587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3]
<7> [241.885600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-3]
<7> [241.890114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:104:DP-3] disconnected
<7> [241.890132] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] enabled? yes
<7> [241.890143] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:76:VGA-1] enabled? no
<7> [241.890151] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:79:HDMI-A-1] enabled? no
<7> [241.890159] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:87:DP-1] enabled? no
<7> [241.890166] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:92:HDMI-A-2] enabled? no
<7> [241.890174] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:96:HDMI-A-3] enabled? no
<7> [241.890181] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:100:DP-2] enabled? no
<7> [241.890189] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:104:DP-3] enabled? no
<7> [241.890234] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [241.890267] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:72:LVDS-1] found preferred mode: 1366x768
<7> [241.890276] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [241.890313] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:52:pipe A] desired mode 1366x768 set (0,0)
<7> [241.893377] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [241.910890] Console: switching to colour frame buffer device 170x48
Created at 2026-02-15 03:11:32