Results for igt@perf_pmu@busy-accuracy-98

Result: Pass

integration-manifest git-log-oneline i915_display_info1 igt_runner1 runtimes1 results1.json results1-i915-load.json guc_logs1.tar i915_display_info_post_exec1 boot1 dmesg1

DetailValue
Duration 12.11 seconds
Hostname 
shard-rkl-2
Igt-Version 
IGT-Version: 2.3-g07ca77c0e (x86_64) (Linux: 6.19.0-CI_DRM_17989-g2c29d9a27aab+ x86_64)
Out 
Using IGT_SRANDOM=1771027311 for randomisation
Opened device: /dev/dri/card0
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980525us, idle 22509us -> 97.76% (target: 98%; average=97.78±0.040%)
1: 10 cycles, busy 1961181us, idle 45759us -> 97.72% (target: 98%; average=97.74±0.006%)
error=0.19% (97.91% vs 97.72%)
Dynamic subtest rcs0: SUCCESS (3.024s)
Starting dynamic subtest: bcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980687us, idle 22581us -> 97.75% (target: 98%; average=97.80±0.063%)
1: 10 cycles, busy 1961349us, idle 46006us -> 97.71% (target: 98%; average=97.72±0.005%)
error=0.17% (97.88% vs 97.71%)
Dynamic subtest bcs0: SUCCESS (3.032s)
Starting dynamic subtest: vcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980544us, idle 22494us -> 97.76% (target: 98%; average=97.81±0.058%)
1: 10 cycles, busy 1961100us, idle 45874us -> 97.71% (target: 98%; average=97.73±0.004%)
error=0.19% (97.90% vs 97.71%)
Dynamic subtest vcs0: SUCCESS (3.027s)
Starting dynamic subtest: vecs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980537us, idle 22435us -> 97.76% (target: 98%; average=97.82±0.048%)
1: 10 cycles, busy 1961268us, idle 45483us -> 97.73% (target: 98%; average=97.75±0.009%)
error=0.18% (97.92% vs 97.73%)
Dynamic subtest vecs0: SUCCESS (3.025s)
Subtest busy-accuracy-98: SUCCESS (12.112s)
Opened device: /dev/dri/renderD128
Err 
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
Dynamic subtest rcs0: SUCCESS (3.024s)
Starting dynamic subtest: bcs0
Dynamic subtest bcs0: SUCCESS (3.032s)
Starting dynamic subtest: vcs0
Dynamic subtest vcs0: SUCCESS (3.027s)
Starting dynamic subtest: vecs0
Dynamic subtest vecs0: SUCCESS (3.025s)
Subtest busy-accuracy-98: SUCCESS (12.112s)
Dmesg
<7> [518.717134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [518.717343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [518.717525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [518.759595] Console: switching to colour dummy device 80x25
<6> [518.760390] [IGT] perf_pmu: executing
<7> [518.762786] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [518.763616] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<6> [518.768703] [IGT] perf_pmu: starting subtest busy-accuracy-98
<6> [518.769429] [IGT] perf_pmu: starting dynamic subtest rcs0
<7> [518.773372] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [521.793481] [IGT] perf_pmu: finished subtest rcs0, SUCCESS
<6> [521.793953] [IGT] perf_pmu: starting dynamic subtest bcs0
<7> [521.799916] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [521.915947] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [521.916015] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [521.916022] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [521.916028] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [522.023477] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [522.023494] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [522.023500] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [522.023506] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [524.826038] [IGT] perf_pmu: finished subtest bcs0, SUCCESS
<6> [524.826884] [IGT] perf_pmu: starting dynamic subtest vcs0
<7> [524.834136] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [524.945174] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [524.945190] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [524.945196] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [524.945203] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [525.053765] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [525.053782] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [525.053788] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [525.053795] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [525.161684] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [525.161699] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [525.161705] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [525.161711] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [525.162119] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [525.162135] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [525.162141] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [525.162148] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [527.854401] [IGT] perf_pmu: finished subtest vcs0, SUCCESS
<6> [527.854867] [IGT] perf_pmu: starting dynamic subtest vecs0
<7> [527.861006] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [530.880501] [IGT] perf_pmu: finished subtest vecs0, SUCCESS
<6> [530.880999] [IGT] perf_pmu: finished subtest busy-accuracy-98, SUCCESS
<7> [530.881213] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [530.882463] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [530.885681] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [530.913444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [530.914094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [530.917031] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [530.918305] [IGT] perf_pmu: exiting, ret=0
<6> [530.936330] Console: switching to colour frame buffer device 240x67
<7> [530.978098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [530.978727] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [530.979359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
Created at 2026-02-14 01:18:14