Results for igt@perf_pmu@busy-accuracy-98

Result: Pass

integration-manifest git-log-oneline i915_display_info1 igt_runner1 runtimes1 results1.json results1-i915-load.json guc_logs1.tar i915_display_info_post_exec1 boot1 dmesg1

DetailValue
Duration 12.11 seconds
Hostname 
shard-rkl-5
Igt-Version 
IGT-Version: 2.3-g07ca77c0e (x86_64) (Linux: 6.19.0-CI_DRM_17984-gf9b2cabe3379+ x86_64)
Out 
Using IGT_SRANDOM=1770990402 for randomisation
Opened device: /dev/dri/card0
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980543us, idle 22520us -> 97.75% (target: 98%; average=97.80±0.053%)
1: 10 cycles, busy 1961151us, idle 45215us -> 97.75% (target: 98%; average=97.75±0.004%)
error=0.19% (97.94% vs 97.75%)
Dynamic subtest rcs0: SUCCESS (3.025s)
Starting dynamic subtest: bcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980552us, idle 22437us -> 97.76% (target: 98%; average=97.80±0.056%)
1: 10 cycles, busy 1961084us, idle 45444us -> 97.74% (target: 98%; average=97.74±0.004%)
error=0.17% (97.91% vs 97.74%)
Dynamic subtest bcs0: SUCCESS (3.025s)
Starting dynamic subtest: vcs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980399us, idle 22336us -> 97.77% (target: 98%; average=97.83±0.053%)
1: 10 cycles, busy 1961121us, idle 45282us -> 97.74% (target: 98%; average=97.75±0.004%)
error=0.19% (97.94% vs 97.74%)
Dynamic subtest vcs0: SUCCESS (3.025s)
Starting dynamic subtest: vecs0
calibration=1000ms, test=2000ms, cycle=200ms; ratio=98.00% (196000us/4000us)
0: 5 cycles, busy 980420us, idle 22424us -> 97.76% (target: 98%; average=97.82±0.061%)
1: 10 cycles, busy 1960835us, idle 45043us -> 97.75% (target: 98%; average=97.75±0.007%)
error=0.19% (97.95% vs 97.75%)
Dynamic subtest vecs0: SUCCESS (3.026s)
Subtest busy-accuracy-98: SUCCESS (12.105s)
Opened device: /dev/dri/renderD128
Err 
Starting subtest: busy-accuracy-98
Starting dynamic subtest: rcs0
Dynamic subtest rcs0: SUCCESS (3.025s)
Starting dynamic subtest: bcs0
Dynamic subtest bcs0: SUCCESS (3.025s)
Starting dynamic subtest: vcs0
Dynamic subtest vcs0: SUCCESS (3.025s)
Starting dynamic subtest: vecs0
Dynamic subtest vecs0: SUCCESS (3.026s)
Subtest busy-accuracy-98: SUCCESS (12.105s)
Dmesg
<7> [404.627969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [404.628155] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [404.628299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [404.664105] Console: switching to colour dummy device 80x25
<6> [404.665155] [IGT] perf_pmu: executing
<7> [404.668391] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [404.669519] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<6> [404.676625] [IGT] perf_pmu: starting subtest busy-accuracy-98
<6> [404.677388] [IGT] perf_pmu: starting dynamic subtest rcs0
<7> [404.683001] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [404.795372] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [404.795387] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [404.795392] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [404.795398] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [407.702867] [IGT] perf_pmu: finished subtest rcs0, SUCCESS
<6> [407.703324] [IGT] perf_pmu: starting dynamic subtest bcs0
<7> [407.709098] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [410.728777] [IGT] perf_pmu: finished subtest bcs0, SUCCESS
<6> [410.729241] [IGT] perf_pmu: starting dynamic subtest vcs0
<7> [410.735849] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [413.754879] [IGT] perf_pmu: finished subtest vcs0, SUCCESS
<6> [413.755391] [IGT] perf_pmu: starting dynamic subtest vecs0
<7> [413.761931] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509
<6> [414.887851] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [414.887866] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [414.887872] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [414.887877] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [415.000792] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0
<4> [415.000809] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [415.000815] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000
<4> [415.000820] nvme 0000:01:00.0: [ 0] RxErr (First)
<6> [416.781781] [IGT] perf_pmu: finished subtest vecs0, SUCCESS
<6> [416.782263] [IGT] perf_pmu: finished subtest busy-accuracy-98, SUCCESS
<7> [416.782465] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [416.782893] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [416.783792] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [416.822410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [416.822975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [416.826711] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [416.827945] [IGT] perf_pmu: exiting, ret=0
<6> [416.845879] Console: switching to colour frame buffer device 240x67
<7> [416.879235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [416.879816] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [416.880400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
Created at 2026-02-13 15:00:01