<5>[ 0.000000] Linux version 6.19.0-rc8-CI_DRM_17930-g241994730989+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Feb 4 08:35:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd87018 ESRT=0x5ae00c18 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem289: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem291: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000602] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000604] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005027] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40. <7>[ 0.005038] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved <6>[ 0.005064] Using GB pages for direct mapping <6>[ 0.005829] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005832] printk: early log buf free: 258744(98%) <6>[ 0.005833] Secure boot disabled <6>[ 0.005836] ACPI: Early table checksum verification disabled <6>[ 0.005841] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005845] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005850] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005854] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005856] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005857] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005859] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005861] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005863] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005865] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005867] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005868] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005871] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005872] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005875] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005876] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005879] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005881] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005882] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005884] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005885] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005887] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005889] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005891] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005895] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005896] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005898] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005900] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005902] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005904] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005905] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005907] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005909] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005910] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005912] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005915] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005917] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005919] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005921] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005923] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005924] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005926] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005927] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005929] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005931] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005933] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005935] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005936] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005938] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005938] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.005938] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005939] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005940] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005940] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005940] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005941] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005941] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005942] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005942] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005943] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005944] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005944] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005945] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005946] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005946] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005947] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005947] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005947] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005948] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005949] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005949] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005950] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005950] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005951] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005951] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005952] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005952] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005953] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005953] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005954] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005954] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005955] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005955] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005956] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005956] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005957] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005957] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005958] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005959] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005959] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005959] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006056] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006267] No NUMA configuration found <6>[ 0.006267] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006275] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006429] Zone ranges: <6>[ 0.006430] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006432] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006433] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006433] Device empty <6>[ 0.006434] Movable zone start for each node <6>[ 0.006435] Early memory node ranges <6>[ 0.006435] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006436] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006437] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006437] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006439] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006445] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006468] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008644] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050560] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051043] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051049] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051050] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051053] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051099] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051101] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051103] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051105] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051106] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051121] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved <6>[ 0.051129] TSC deadline timer available <6>[ 0.051132] CPU topo: Max. logical packages: 1 <6>[ 0.051132] CPU topo: Max. logical dies: 1 <6>[ 0.051133] CPU topo: Max. dies per package: 1 <6>[ 0.051135] CPU topo: Max. threads per core: 2 <6>[ 0.051136] CPU topo: Num. cores per package: 16 <6>[ 0.051137] CPU topo: Num. threads per package: 22 <6>[ 0.051137] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051159] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051161] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051162] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff] <6>[ 0.051164] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff] <6>[ 0.051166] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051167] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051170] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051171] Booting paravirtualized kernel on bare hardware <6>[ 0.051174] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051187] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052710] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052717] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052718] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052721] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052724] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052749] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052844] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052865] random: crng init done <6>[ 0.055672] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057073] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057207] software IO TLB: area num 32. <6>[ 0.068573] Fallback order for Node 0: 0 <6>[ 0.068577] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.068578] Policy zone: Normal <6>[ 0.068591] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068592] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068596] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070046] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112365] ********************************************************** <4>[ 0.112366] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112366] ** ** <4>[ 0.112366] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112367] ** via the console, logs, and other interfaces. This ** <4>[ 0.112367] ** might reduce the security of your system. ** <4>[ 0.112367] ** ** <4>[ 0.112367] ** If you see this message and you are not debugging ** <4>[ 0.112367] ** the kernel, report this immediately to your system ** <4>[ 0.112368] ** administrator! ** <4>[ 0.112368] ** ** <4>[ 0.112368] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112369] ** ** <4>[ 0.112369] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112369] ********************************************************** <6>[ 0.113926] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.124591] ftrace: allocating 61101 entries in 240 pages <6>[ 0.124592] ftrace: allocated 240 pages with 4 groups <6>[ 0.126380] Dynamic Preempt: voluntary <6>[ 0.127477] Running RCU self tests <6>[ 0.127477] Running RCU synchronous self tests <6>[ 0.127478] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.127479] rcu: RCU lockdep checking is enabled. <6>[ 0.127479] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.127480] Trampoline variant of Tasks RCU enabled. <6>[ 0.127480] Rude variant of Tasks RCU enabled. <6>[ 0.127480] Tracing variant of Tasks RCU enabled. <6>[ 0.127480] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.127481] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127613] Running RCU synchronous self tests <6>[ 0.127619] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127624] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127628] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.140053] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.140622] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.141235] Console: colour dummy device 80x25 <6>[ 0.141245] printk: legacy console [tty0] enabled <6>[ 0.142511] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.142519] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.142524] ... MAX_LOCK_DEPTH: 48 <6>[ 0.142528] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.142533] ... CLASSHASH_SIZE: 4096 <6>[ 0.142538] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.142542] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.142547] ... CHAINHASH_SIZE: 262144 <6>[ 0.142551] memory used by lock dependency info: 54145 kB <6>[ 0.142557] memory used for stack traces: 4224 kB <6>[ 0.142562] per task-struct memory footprint: 1920 bytes <6>[ 0.142640] ACPI: Core revision 20250807 <6>[ 0.143748] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.143810] APIC: Switch to symmetric I/O mode setup <6>[ 0.143817] DMAR: Host address width 42 <6>[ 0.143821] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.143863] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.143872] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.143892] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.143900] DMAR: SATC flags: 0x1 <6>[ 0.143910] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.143916] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.143921] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.145619] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.150020] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.150043] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.150111] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.150118] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.150321] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.150329] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.150338] process: using mwait in idle threads <6>[ 0.150346] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.150361] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.150369] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.150374] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.150380] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.150389] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.150408] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.150416] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.150422] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.150429] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.150436] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.150443] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.150451] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.150457] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.150463] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.150469] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.150475] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.151036] Freeing SMP alternatives memory: 56K <6>[ 0.151036] pid_max: default: 32768 minimum: 301 <6>[ 0.151036] landlock: Up and running. <6>[ 0.151036] Yama: becoming mindful. <6>[ 0.151036] AppArmor: AppArmor initialized <6>[ 0.151036] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.151036] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.151036] Running RCU synchronous self tests <6>[ 0.151036] Running RCU synchronous self tests <6>[ 0.151036] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.151036] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.151333] core: cpu_core PMU driver: <6>[ 0.151342] ... version: 5 <6>[ 0.151347] ... bit width: 48 <6>[ 0.151351] ... generic counters: 8 <6>[ 0.151355] ... generic bitmap: 00000000000000ff <6>[ 0.151360] ... fixed-purpose counters: 4 <6>[ 0.151364] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.151369] ... value mask: 0000ffffffffffff <6>[ 0.151374] ... max period: 00007fffffffffff <6>[ 0.151379] ... global_ctrl mask: 0001000f000000ff <6>[ 0.151577] signal: max sigframe size: 3632 <6>[ 0.151610] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 0.151768] rcu: Hierarchical SRCU implementation. <6>[ 0.151773] rcu: Max phase no-delay instances is 400. <6>[ 0.151964] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.154771] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.155561] smp: Bringing up secondary CPUs ... <6>[ 0.155985] smpboot: x86: Booting SMP configuration: <6>[ 0.155993] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010284] core: cpu_atom PMU driver: <6>[ 0.010284] ... version: 5 <6>[ 0.010284] ... bit width: 48 <6>[ 0.010284] ... generic counters: 8 <6>[ 0.010284] ... generic bitmap: 00000000000000ff <6>[ 0.010284] ... fixed-purpose counters: 3 <6>[ 0.010284] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010284] ... value mask: 0000ffffffffffff <6>[ 0.010284] ... max period: 00007fffffffffff <6>[ 0.010284] ... global_ctrl mask: 00000007000000ff <5>[ 0.170396] #2 #4 #5 #7 #9 #11 <6>[ 0.177121] smp: Brought up 1 node, 22 CPUs <6>[ 0.177121] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180204] Memory: 32229200K/33040248K available (25578K kernel code, 5618K rwdata, 9656K rodata, 5720K init, 68168K bss, 780060K reserved, 0K cma-reserved) <6>[ 0.184274] devtmpfs: initialized <6>[ 0.184412] x86/mm: Memory block size: 128MB <6>[ 0.208780] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.209645] Running RCU synchronous self tests <6>[ 0.209665] Running RCU synchronous self tests <6>[ 0.209683] Running RCU Tasks wait API self tests <6>[ 0.209683] Running RCU Tasks Rude wait API self tests <6>[ 0.209683] Running RCU Tasks Trace wait API self tests <6>[ 0.223064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.223327] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.223603] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.224869] PM: RTC time: 18:51:46, date: 2026-02-04 <6>[ 0.225721] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.226995] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.227410] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.227809] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.227867] audit: initializing netlink subsys (disabled) <5>[ 0.227903] audit: type=2000 audit(1770231106.077:1): state=initialized audit_enabled=0 res=1 <6>[ 0.228771] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.228773] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.228779] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.228783] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.228788] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.228825] cpuidle: using governor ladder <6>[ 0.228825] cpuidle: using governor menu <6>[ 0.229136] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.229622] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.229652] PCI: Using configuration type 1 for base access <6>[ 0.229791] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.230354] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.230354] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.230354] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.230354] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.234167] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.234176] raid6: using avx2x2 recovery algorithm <6>[ 0.234793] fbcon: Taking over console <6>[ 0.234977] ACPI: Added _OSI(Module Device) <6>[ 0.234982] ACPI: Added _OSI(Processor Device) <6>[ 0.234986] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.242048] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.936452] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.947248] ACPI: EC: EC started <6>[ 0.947259] ACPI: EC: interrupt blocked <6>[ 0.949936] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.949941] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.071327] Callback from call_rcu_tasks() invoked. <6>[ 1.228558] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.228574] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.295136] ACPI: Interpreter enabled <6>[ 1.295257] ACPI: PM: (supports S0 S4 S5) <6>[ 1.295262] ACPI: Using IOAPIC for interrupt routing <6>[ 1.300968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.300976] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.333586] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.333627] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.436832] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.747206] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.781349] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.794342] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.808776] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.814993] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.822315] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.829752] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.098317] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.098737] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.099055] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.224772] ACPI: \_TZ_.FN00: New power resource <6>[ 2.225861] ACPI: \_TZ_.FN01: New power resource <6>[ 2.226928] ACPI: \_TZ_.FN02: New power resource <6>[ 2.228034] ACPI: \_TZ_.FN03: New power resource <6>[ 2.229141] ACPI: \_TZ_.FN04: New power resource <6>[ 2.234803] ACPI: \PIN_: New power resource <6>[ 2.241392] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.241423] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.245385] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.252062] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.275499] PCI host bridge to bus 0000:00 <6>[ 2.275562] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.275578] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.275593] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.275609] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.275625] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.275643] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.292995] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.294377] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.294426] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.294442] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.294495] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.294510] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.294572] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.294661] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.294674] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.297544] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.297600] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.301171] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.301205] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.301220] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.302373] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.302407] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.302419] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.302536] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.302615] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.308453] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.308489] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.308500] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.308516] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.308617] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.308677] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.313735] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.313771] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.313781] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.313795] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.313889] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.313947] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.319221] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.319266] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.319778] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.319805] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.319816] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.320056] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.320085] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.320093] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.320699] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.320767] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.320852] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.323143] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.323231] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.323243] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.323304] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.323308] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.324939] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.324977] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.325028] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.328175] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.328216] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.328269] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.330859] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.330908] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.330916] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.331007] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.331007] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.342481] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.342543] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.354478] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.354538] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.366660] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.366717] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.378675] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.378728] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.378790] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.381651] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.381692] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.381698] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.381944] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.382001] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.392660] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.392717] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.404547] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.406073] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.406178] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.406192] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.406308] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.406801] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.406852] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.406862] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.408261] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.408362] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.408622] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.408702] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.408781] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.410645] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.410712] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.413100] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.413337] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.413557] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.843441] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.843460] Low-power S0 idle used by default for system suspend <6>[ 2.959504] ACPI: EC: interrupt unblocked <6>[ 2.959514] ACPI: EC: event unblocked <6>[ 2.960038] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.960038] ACPI: EC: GPE=0x6e <6>[ 2.960038] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.960038] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.961056] iommu: Default domain type: Translated <6>[ 2.961056] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.963700] SCSI subsystem initialized <7>[ 2.964098] libata version 3.00 loaded. <6>[ 2.964239] ACPI: bus type USB registered <6>[ 2.964239] usbcore: registered new interface driver usbfs <6>[ 2.964239] usbcore: registered new interface driver hub <6>[ 2.964262] usbcore: registered new device driver usb <6>[ 2.964430] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.964435] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.964458] PTP clock support registered <6>[ 2.965103] EDAC MC: Ver: 3.0.0 <6>[ 2.966075] efivars: Registered efivars operations <6>[ 2.967245] NetLabel: Initializing <6>[ 2.967251] NetLabel: domain hash size = 128 <6>[ 2.967256] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.967341] NetLabel: unlabeled traffic allowed by default <6>[ 2.967361] mctp: management component transport protocol core <6>[ 2.967367] NET: Registered PF_MCTP protocol family <6>[ 2.967427] PCI: Using ACPI for IRQ routing <7>[ 2.979170] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.979355] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.979540] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.979549] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff] <7>[ 2.979552] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff] <7>[ 2.979555] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 2.980091] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.980091] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.980091] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.980103] vgaarb: loaded <6>[ 2.989296] clocksource: Switched to clocksource tsc-early <5>[ 2.994018] VFS: Disk quotas dquot_6.6.0 <6>[ 2.994047] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.995324] AppArmor: AppArmor Filesystem Enabled <6>[ 2.995523] pnp: PnP ACPI init <6>[ 2.996509] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.996520] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.997105] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 2.998599] system 00:03: [io 0x06a4] has been reserved <6>[ 2.998609] system 00:03: [io 0x06a0] has been reserved <4>[ 3.019102] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.019120] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.019267] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.019277] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.020278] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.020292] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.020303] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.020311] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.025606] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.026733] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.030060] pnp: PnP ACPI: found 8 devices <6>[ 3.043274] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.043782] NET: Registered PF_INET protocol family <6>[ 3.044077] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.047903] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.048123] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.048428] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.049717] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.051236] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.052009] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.053051] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.054209] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.054307] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.054360] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.054381] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.054393] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.054405] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.054428] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.054454] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.054475] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.054498] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.054523] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.054545] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.054581] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.054595] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.054614] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.054637] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.054650] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.054663] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.054679] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.054694] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.054706] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.054719] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.054736] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.054746] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.054756] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.054767] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.054778] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.054790] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.054801] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.054810] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.054819] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.054832] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.054841] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.054851] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.056896] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.059809] PCI: CLS 0 bytes, default 64 <6>[ 3.059962] DMAR: No RMRR found <6>[ 3.059985] DMAR: No ATSR found <6>[ 3.059992] DMAR: dmar0: Using Queued invalidation <6>[ 3.060004] DMAR: dmar1: Using Queued invalidation <6>[ 3.061310] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.063239] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.063352] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.063455] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.063576] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.063708] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.063849] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.063944] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.064042] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.064138] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.064271] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.064344] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.064454] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.064574] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.064649] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.064791] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.064865] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.064934] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.065009] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.065124] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.065200] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.065320] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.065395] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.065547] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.065630] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.065705] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.065779] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.065854] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.065968] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.089994] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.090007] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.090018] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB) <6>[ 3.094218] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.094577] clocksource: Switched to clocksource tsc <6>[ 3.094771] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.105548] Initialise system trusted keyrings <5>[ 3.105639] Key type blacklist registered <6>[ 3.105968] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.118389] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.118523] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.118532] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.120415] integrity: Platform Keyring initialized <5>[ 3.120442] integrity: Machine keyring initialized <6>[ 3.128344] xor: automatically using best checksumming function avx <5>[ 3.128358] Key type asymmetric registered <5>[ 3.128372] Asymmetric key parser 'x509' registered <6>[ 3.128529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.128962] io scheduler mq-deadline registered <6>[ 3.132755] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.135292] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.137400] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.139253] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.141717] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.142156] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.142550] ACPI: button: Lid Switch [LID0] <6>[ 3.142931] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.143179] ACPI: button: Sleep Button [SLPB] <6>[ 3.143488] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.143731] ACPI: button: Power Button [PWRB] <6>[ 3.250260] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.250275] ACPI: thermal: Thermal Zone [TZ00] (38 C) <6>[ 3.251992] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.252054] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.253079] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.275204] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.295102] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.297576] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.321390] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.323541] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.323661] Linux agpgart interface v0.103 <6>[ 3.351925] ACPI: bus type drm_connector registered <7>[ 3.353618] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.384388] loop: module loaded <6>[ 3.434741] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.564280] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.663358] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.755039] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.874534] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 4.003902] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.144800] Key type psk registered <6>[ 4.147281] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.147858] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.148652] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.149722] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.149855] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.151954] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.155494] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.155524] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.155549] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.155984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.156009] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.156021] usb usb1: Product: xHCI Host Controller <6>[ 4.156030] usb usb1: Manufacturer: Linux 6.19.0-rc8-CI_DRM_17930-g241994730989+ xhci-hcd <6>[ 4.156044] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.157164] hub 1-0:1.0: USB hub found <6>[ 4.157278] hub 1-0:1.0: 1 port detected <6>[ 4.162235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.162253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.162266] usb usb2: Product: xHCI Host Controller <6>[ 4.162275] usb usb2: Manufacturer: Linux 6.19.0-rc8-CI_DRM_17930-g241994730989+ xhci-hcd <6>[ 4.162301] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.163186] hub 2-0:1.0: USB hub found <6>[ 4.163259] hub 2-0:1.0: 4 ports detected <6>[ 4.196412] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.196454] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.198363] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.201295] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.201321] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.201347] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.201578] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.201594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.201606] usb usb3: Product: xHCI Host Controller <6>[ 4.201615] usb usb3: Manufacturer: Linux 6.19.0-rc8-CI_DRM_17930-g241994730989+ xhci-hcd <6>[ 4.201628] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.202501] hub 3-0:1.0: USB hub found <6>[ 4.202555] hub 3-0:1.0: 12 ports detected <6>[ 4.222727] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.244906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.244925] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.244937] usb usb4: Product: xHCI Host Controller <6>[ 4.244946] usb usb4: Manufacturer: Linux 6.19.0-rc8-CI_DRM_17930-g241994730989+ xhci-hcd <6>[ 4.244959] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.245788] hub 4-0:1.0: USB hub found <6>[ 4.245835] hub 4-0:1.0: 2 ports detected <6>[ 4.252549] usbcore: registered new interface driver usb-storage <6>[ 4.252771] usbcore: registered new interface driver usbserial_generic <6>[ 4.252868] usbserial: USB Serial support registered for generic <6>[ 4.252951] usbcore: registered new interface driver ftdi_sio <6>[ 4.252996] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.253094] usbcore: registered new interface driver pl2303 <6>[ 4.253140] usbserial: USB Serial support registered for pl2303 <6>[ 4.253299] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.253311] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 4.261266] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 4.272026] nvme0n1: p1 p2 <3>[ 4.954688] i8042: Can't read CTR while initializing i8042 <3>[ 4.954702] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.955763] mousedev: PS/2 mouse device common for all mice <6>[ 4.956944] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.958746] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.958921] rtc_cmos rtc_cmos: setting system clock to 2026-02-04T18:51:51 UTC (1770231111) <6>[ 4.959117] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.959180] i2c_dev: i2c /dev entries driver <6>[ 4.964363] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.964381] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.964395] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.964439] device-mapper: uevent: version 1.0.3 <6>[ 4.965129] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.965151] intel_pstate: Intel P-state driver initializing <6>[ 4.976691] intel_pstate: HWP enabled <6>[ 4.976702] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.976709] sdhci: Copyright(c) Pierre Ossman <6>[ 4.976892] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.980098] drop_monitor: Initializing network drop monitor service <6>[ 4.980314] NET: Registered PF_INET6 protocol family <6>[ 4.981586] Segment Routing with IPv6 <6>[ 4.981622] In-situ OAM (IOAM) with IPv6 <6>[ 4.981671] NET: Registered PF_PACKET protocol family <5>[ 4.981844] Key type dns_resolver registered <4>[ 4.995614] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.997433] microcode: Current revision: 0x0000001c <6>[ 4.999130] IPI shorthand broadcast: enabled <6>[ 5.012743] sched_clock: Marking stable (5003001774, 9284512)->(5083596554, -71310268) <6>[ 5.014355] registered taskstats version 1 <5>[ 5.016974] Loading compiled-in X.509 certificates <6>[ 5.063348] Demotion targets for Node 0: null <6>[ 5.063580] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 5.063592] kmemleak: Automatic memory scanning thread started <5>[ 5.063830] Key type .fscrypt registered <5>[ 5.063834] Key type fscrypt-provisioning registered <6>[ 5.066855] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 5.066971] Key type trusted registered <5>[ 5.072854] Key type encrypted registered <6>[ 5.072878] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 5.072915] Loading compiled-in module X.509 certificates <5>[ 5.073596] Loaded X.509 cert 'Build time autogenerated kernel key: ff50aeb09c7230ceddee79554190312ec338f38a' <6>[ 5.073607] ima: Allocated hash algorithm: sha256 <6>[ 5.115252] ima: No architecture policies found <6>[ 5.115408] evm: Initialising EVM extended attributes: <6>[ 5.115415] evm: security.selinux <6>[ 5.115420] evm: security.SMACK64 <6>[ 5.115424] evm: security.SMACK64EXEC <6>[ 5.115429] evm: security.SMACK64TRANSMUTE <6>[ 5.115434] evm: security.SMACK64MMAP <6>[ 5.115439] evm: security.apparmor <6>[ 5.115444] evm: security.ima <6>[ 5.115448] evm: security.capability <6>[ 5.115452] evm: HMAC attrs: 0x1 <6>[ 5.118094] PM: Magic number: 14:523:897 <6>[ 5.118182] acpi INT340E:00: hash matches <6>[ 5.118351] netconsole: network logging started <6>[ 5.118908] RAS: Correctable Errors collector initialized. <6>[ 5.119086] clk: Disabling unused clocks <6>[ 5.119098] PM: genpd: Disabling unused power domains <4>[ 5.119906] check access for rdinit=/init failed: -2, ignoring <6>[ 5.119916] md: Waiting for all devices to be available before autodetect <6>[ 5.119921] md: If you don't use raid, use raid=noautodetect <6>[ 5.119926] md: Autodetecting RAID arrays. <6>[ 5.119933] md: autorun ... <6>[ 5.119936] md: ... autorun DONE. <6>[ 5.174976] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.188637] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.188672] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.188686] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.188697] usb 4-1: Manufacturer: Realtek <6>[ 5.188706] usb 4-1: SerialNumber: 000001 <6>[ 5.190395] EXT4-fs (nvme0n1p2): mounted filesystem f122a966-f29a-437f-8b15-4f3e9c2e449d ro with ordered data mode. Quota mode: none. <6>[ 5.190468] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.192011] devtmpfs: mounted <6>[ 5.209453] Freeing unused decrypted memory: 2036K <6>[ 5.211014] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.211043] Write protecting the kernel read-only data: 36864k <6>[ 5.212756] Freeing unused kernel image (text/rodata gap) memory: 1044K <6>[ 5.213873] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.219746] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.232373] Run /sbin/init as init process <7>[ 5.232380] with arguments: <7>[ 5.232381] /sbin/init <7>[ 5.232381] with environment: <7>[ 5.232382] HOME=/ <7>[ 5.232383] TERM=linux <7>[ 5.312642] systemd[1]: Inserted module 'autofs4' <7>[ 5.346595] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.346624] systemd[1]: Detected architecture x86-64. <7>[ 5.348272] systemd[1]: Hostname set to . <7>[ 5.620442] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.660453] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.666515] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.670266] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.670612] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.671343] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.671466] systemd[1]: Expecting device dev-disk-by\x2duuid-30D0\x2d93C8.device - /dev/disk/by-uuid/30D0-93C8... <7>[ 5.671551] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.671635] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.671706] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.671774] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.671847] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.672095] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.672491] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.672779] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.673112] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.673393] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.673615] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.673918] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.674257] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.674573] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.674781] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.675088] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.675370] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.678627] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.681636] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.684474] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.689264] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.696602] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.699323] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.702509] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.705930] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.708924] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.711457] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.713588] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.716702] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.719630] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.722567] systemd-journald[308]: Collecting audit messages is disabled. <7>[ 5.724816] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.729209] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.729368] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.733023] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.735415] pstore: Using crash dump compression: deflate <6>[ 5.737474] pstore: Registered efi_pstore as persistent store backend <7>[ 5.737601] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.737733] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.737803] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.740216] fuse: init (API version 7.45) <7>[ 5.742009] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.747600] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.885409] EXT4-fs (nvme0n1p2): re-mounted f122a966-f29a-437f-8b15-4f3e9c2e449d r/w. <6>[ 5.922316] Adding 8388604k swap on /swap.img. Priority:-1 extents:53 across:700645376k SS <7>[ 5.938320] systemd-journald[308]: Received client request to flush runtime journal. <7>[ 5.957173] systemd-journald[308]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.957187] systemd-journald[308]: Rotating system journal. <4>[ 6.629228] nvme nvme0: using unchecked data buffer <6>[ 6.764945] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.800037] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.811657] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.826096] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.845217] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 6.889593] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 6.889809] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 7.033958] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 7.033994] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 7.058401] ACPI: bus type thunderbolt registered <6>[ 7.064752] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <5>[ 7.068267] audit: type=1400 audit(1770231113.607:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=541 comm="apparmor_parser" <5>[ 7.069005] audit: type=1400 audit(1770231113.608:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=543 comm="apparmor_parser" <5>[ 7.069180] audit: type=1400 audit(1770231113.608:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=545 comm="apparmor_parser" <5>[ 7.070260] audit: type=1400 audit(1770231113.609:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=542 comm="apparmor_parser" <5>[ 7.070592] audit: type=1400 audit(1770231113.610:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=546 comm="apparmor_parser" <6>[ 7.072574] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <5>[ 7.072663] audit: type=1400 audit(1770231113.612:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=547 comm="apparmor_parser" <6>[ 7.075157] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 7.075160] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <5>[ 7.075229] audit: type=1400 audit(1770231113.614:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=548 comm="apparmor_parser" <5>[ 7.078181] audit: type=1400 audit(1770231113.617:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=549 comm="apparmor_parser" <5>[ 7.080951] audit: type=1400 audit(1770231113.620:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=550 comm="apparmor_parser" <5>[ 7.082925] audit: type=1400 audit(1770231113.622:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=551 comm="apparmor_parser" <6>[ 7.084254] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 7.087933] pci 0000:00:08.0: Setting to D3hot <6>[ 7.095766] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 7.096731] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 7.096736] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 7.099637] pci 0000:00:05.0: Setting to D3hot <6>[ 7.101997] EDAC igen6: v2.5.1 <6>[ 7.111749] intel_pmc_core INT33A1:00: initialized <6>[ 7.124554] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.124683] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 7.167688] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 7.195347] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.257973] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.271726] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.330051] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.346304] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.415863] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.415871] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.415990] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.485923] intel_rapl_msr: PL4 support detected. <6>[ 7.486576] intel_rapl_common: Found RAPL domain package <6>[ 7.486580] intel_rapl_common: Found RAPL domain core <6>[ 7.486583] intel_rapl_common: Found RAPL domain psys <6>[ 7.570534] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer <6>[ 7.570540] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.570542] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.570544] RAPL PMU: hw unit of domain psys 2^-14 Joules <4>[ 7.573175] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.573984] usbcore: registered new device driver r8152-cfgselector <6>[ 7.603911] e1000e 0000:00:1f.6 eno0: renamed from eth0 <5>[ 7.609692] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.609710] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.627013] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.630001] intel_rapl_common: Found RAPL domain package <6>[ 7.671637] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.682650] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.683901] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.685267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.714360] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.718060] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.721128] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.721485] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.724479] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.724704] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.726140] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.726865] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.729426] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.730517] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.731575] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.733824] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.735967] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.736898] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.740201] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.740534] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.743616] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.744559] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.748009] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.748641] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.751919] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.751953] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.754160] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.756350] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.763363] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.815651] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.819488] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.822624] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.827659] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.830617] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.834491] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.839812] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.845003] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.847201] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.852758] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.857029] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.863123] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.867498] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.872862] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.877931] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.883071] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.888207] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.893294] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.900121] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.907882] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.969843] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 7.970048] usbcore: registered new interface driver r8152 <6>[ 7.974716] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.978791] usbcore: registered new interface driver cdc_ether <6>[ 7.985217] usbcore: registered new interface driver r8153_ecm <4>[ 7.985941] block nvme0n1: No UUID available providing old NGUID <6>[ 8.039404] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth0 <6>[ 8.261606] loop0: detected capacity change from 0 to 8 <6>[ 8.392939] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.475499] Consider using thermal netlink events interface <6>[ 10.784532] r8152 4-1:1.0 enxe2015072f1a3: carrier on <4>[ 15.663296] hrtimer: interrupt took 2741 ns <3>[ 16.460855] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 16.659860] systemd-journald[308]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 17.282333] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 18.555187] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.557755] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 48.902848] [IGT] i915_module_load: executing <4>[ 48.902898] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 48.911983] [IGT] i915_module_load: starting subtest load <4>[ 49.500882] ********************************************************** <4>[ 49.500883] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.500884] ** ** <4>[ 49.500885] ** trace_printk() being used. Allocating extra memory. ** <4>[ 49.500885] ** ** <4>[ 49.500886] ** This means that this is a DEBUG kernel and it is ** <4>[ 49.500887] ** unsafe for production use. ** <4>[ 49.500887] ** ** <4>[ 49.500888] ** If you see this message and you are not debugging ** <4>[ 49.500889] ** the kernel, report this immediately to your vendor! ** <4>[ 49.500890] ** ** <4>[ 49.500890] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.500891] ********************************************************** <5>[ 49.526373] Setting dangerous option force_probe - tainting kernel <6>[ 49.530716] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 49.531914] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.532162] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 49.532322] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 49.532493] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 49.532696] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 49.532888] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 49.533087] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.533305] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 49.533538] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 49.533712] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 49.534202] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 49.534338] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 49.534897] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 49.535027] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 49.535476] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 49.535710] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 49.535838] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 49.535962] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 49.536083] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 49.536464] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 49.536795] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 49.536804] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 49.536963] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 49.537595] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 49.537835] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1942fff], io: n/a <7>[ 49.537965] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 49.538276] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 49.538461] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 49.538607] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 49.538750] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 49.538889] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 49.539024] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 49.539176] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 49.539316] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 49.539476] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 49.539625] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 49.539777] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 49.539929] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 49.540091] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 49.540247] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 49.540408] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 49.540556] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 49.540702] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.540847] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.540989] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.541130] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 49.541271] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.541428] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.541569] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.541709] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.541849] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.541989] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.542132] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.542274] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.542421] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.542561] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.542701] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.542841] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.542979] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.543121] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.543262] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.543412] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.543551] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.543689] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.543828] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.544481] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 49.544644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 49.544796] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 49.544949] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 49.545093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 49.545234] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 49.545414] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7>[ 49.545559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 49.545703] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 49.545859] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 49.546000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 49.546140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 49.546286] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 49.546429] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 49.546573] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 49.546716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 49.546857] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 49.546998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 49.547141] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 49.547290] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.547436] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 49.547578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.547720] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.547860] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 49.548001] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.548145] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.548291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.548433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.548575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.548716] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.548872] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 49.549038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.549248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 49.549437] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.549656] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 49.549898] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 49.550068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 49.550214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 49.550372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.550564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 49.550716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 49.550892] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 49.551035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 49.551196] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 49.551352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 49.551513] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 49.551657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 49.551824] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7>[ 49.552375] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 49.552859] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 49.554062] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 49.554240] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 49.554387] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 49.554530] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 49.554676] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 49.554820] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 49.554960] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 49.555099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 49.555256] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 49.555395] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 49.555532] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 49.555669] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 49.555804] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 49.559399] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 49.559566] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 49.559737] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 49.559886] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 49.560034] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 49.560206] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 49.560415] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 49.560563] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 49.560708] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.560853] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 49.561012] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.561183] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 49.561329] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.561477] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 49.561631] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.561790] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 49.561979] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 49.562179] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 49.562343] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.562492] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 49.562646] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.562797] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 49.562948] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.563105] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 49.563245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.563394] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 49.563561] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 49.563651] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 49.563716] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 49.563868] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.564023] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 49.564200] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.564354] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 49.564515] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 49.564664] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 49.564809] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.564953] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 49.565126] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.565298] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 49.571223] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.571435] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 49.571619] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 49.573238] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 49.573740] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A] <7>[ 49.574167] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <6>[ 49.574286] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 49.574371] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 49.574547] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 49.574720] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 49.574872] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 49.575263] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 49.575444] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 49.575621] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 49.575773] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 49.576120] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 49.576411] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.576582] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.576731] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.576875] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.577036] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 49.577332] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 49.577672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 49.578964] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 49.579233] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 49.580510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 49.580907] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 49.581494] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 49.582255] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 49.582737] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 49.584089] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.590045] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.590055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 49.590060] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 49.590112] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.590598] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms) <7>[ 49.591103] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 49.591324] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none <7>[ 49.591582] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 49.591794] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 49.592006] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.592170] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.592328] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.592472] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.592620] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 49.592930] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 49.593251] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 49.593430] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B] <7>[ 49.593934] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B] <7>[ 49.594096] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 49.594459] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 49.594746] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.595021] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1] <7>[ 49.595362] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 49.595630] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 49.596000] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 49.596173] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:542:DDI TC2/PHY TC2] <7>[ 49.596320] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 49.596548] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:546:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 49.596785] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.597049] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:546:DDI TC3/PHY TC3] <7>[ 49.597390] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:555:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 49.597625] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.597895] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:555:DDI TC4/PHY TC4] <7>[ 49.598417] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6>[ 49.598584] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 49.599362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 49.599709] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7>[ 49.600046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7>[ 49.600414] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled <7>[ 49.600575] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 49.600744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 49.600923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 49.601117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 49.601305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 49.601477] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 49.601640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7>[ 49.601796] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7>[ 49.601967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7>[ 49.602126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7>[ 49.602283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7>[ 49.602442] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7>[ 49.602597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7>[ 49.602771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7>[ 49.602995] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7>[ 49.603172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7>[ 49.603341] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7>[ 49.603496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7>[ 49.603676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D <7>[ 49.603847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D <7>[ 49.604038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D <7>[ 49.604208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D <7>[ 49.604362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D <7>[ 49.604520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D <7>[ 49.605624] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 49.605846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 49.606033] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 49.606192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.606339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.606487] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.606653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.606866] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.607035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 49.607188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.607331] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.607495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.607671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.607996] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.608172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 49.608357] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.608521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 49.608720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.608893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.609063] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.609235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.609426] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.609603] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 49.609773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.609941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.610107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.610277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.611272] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 49.611436] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 49.611606] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.611765] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 49.611927] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.612092] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.612247] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.612406] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.612710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: enabled <7>[ 49.612890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled <7>[ 49.613061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled <7>[ 49.613231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled <7>[ 49.613401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:HDMI-A-2] hw state readout: disabled <7>[ 49.613586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:547:DP-3] hw state readout: disabled <7>[ 49.613755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:556:DP-4] hw state readout: disabled <7>[ 49.614011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 256910 kHz <7>[ 49.614165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 49.614316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 49.614472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 49.614620] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 49.614768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 49.614917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 256910 kHz <7>[ 49.615066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7>[ 49.615214] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7>[ 49.615362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7>[ 49.615519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7>[ 49.615666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7>[ 49.615814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7>[ 49.615962] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7>[ 49.616108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7>[ 49.616252] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7>[ 49.616396] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7>[ 49.616553] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7>[ 49.616700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7>[ 49.616849] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7>[ 49.616998] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7>[ 49.617147] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz <7>[ 49.617294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz <7>[ 49.617445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz <7>[ 49.617593] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz <7>[ 49.617739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz <7>[ 49.617888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz <7>[ 49.618037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz <7>[ 49.618386] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 49.618555] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.618708] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.618864] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.619020] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 49.619191] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 49.619355] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 49.619528] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 49.619785] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 49.620173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 49.620350] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 49.620528] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 49.620682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 49.620833] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 49.620983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 49.621130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 49.621278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 49.621438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 49.621586] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 49.621735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 49.621899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 49.622103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 49.622258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 49.622429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 49.622571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 49.622719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 49.622863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 49.623005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 49.623147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.623290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.623446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.623590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.623732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.623875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 49.624022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 49.624166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 49.624311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 49.624467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 49.624652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.624846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: no, <7>[ 49.625001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 49.625145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 49.625288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.625439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 49.625579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.625722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.625864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 49.626005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 49.626145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 49.626284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 49.626440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.626584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.626727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.626869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.627012] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.627175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.627374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.627522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.627674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.627820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.627966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 49.628115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7>[ 49.628260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7>[ 49.628415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state] <7>[ 49.628556] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 49.628983] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 49.629145] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 49.629309] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 49.630057] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 49.639479] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 49.645615] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 49.645775] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 49.645916] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 49.646053] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 49.646212] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 49.646383] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 49.646530] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 49.648861] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 49.649024] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 49.649195] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 49.649993] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 49.650163] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 49.650600] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 49.650747] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 49.651821] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 49.651999] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 49.652190] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 49.671924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 49.672115] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 49.672263] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 49.672406] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 49.672547] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 49.672687] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 49.672836] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 49.672974] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 49.673115] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 49.673256] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 49.673397] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 49.673535] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 49.673672] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 49.673823] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 49.674757] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 49.684703] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1600MHz -> 1700MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 49.685576] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 49.687216] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 49.687218] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 49.687659] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 49.687927] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 49.688717] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 49.695679] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 49.695854] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 49.696878] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 49.697044] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 49.697930] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 49.698084] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 49.698673] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 49.698822] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 49.699397] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 49.699554] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 49.701314] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 49.701508] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 49.701676] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 49.722599] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 49.722771] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 49.722916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 49.723057] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 49.723209] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 49.723346] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 49.723482] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 49.723616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 49.723749] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 49.723886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 49.724024] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 49.724167] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 49.724304] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 49.724437] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 49.724571] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 49.727641] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 49.727891] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 49.728377] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 49.728380] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 49.742024] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1250MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 49.742294] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 49.750927] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 49.751077] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 49.751954] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 49.751956] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 49.752135] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 49.752623] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 49.753852] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 49.761762] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 49.761911] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 49.762051] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 49.762190] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 49.762326] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 49.762455] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 49.762580] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 49.764046] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 49.765239] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 49.765409] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 49.765561] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 49.765736] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 49.765883] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 49.766029] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7>[ 49.766176] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7>[ 49.766321] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7>[ 49.766463] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7>[ 49.766605] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7>[ 49.766757] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008 <7>[ 49.766900] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108 <7>[ 49.767044] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208 <7>[ 49.767185] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308 <7>[ 49.767325] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8 <7>[ 49.767463] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008 <7>[ 49.767600] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108 <7>[ 49.767750] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208 <7>[ 49.767887] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308 <7>[ 49.768028] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8 <7>[ 49.768453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 49.768608] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 49.768815] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 49.768962] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 49.769105] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 49.769243] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.769380] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 49.769515] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 49.769696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7>[ 49.769852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7>[ 49.770008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset] <7>[ 49.771595] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 49.771761] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7>[ 49.771962] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 49.772124] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 49.781990] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7>[ 49.782407] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7>[ 49.782766] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D] <7>[ 49.787281] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs <7>[ 49.790084] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered <7>[ 49.790274] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 49.790462] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Panel prepare <7>[ 49.790888] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 49.792071] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event <7>[ 49.792139] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs <7>[ 49.792583] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 49.793320] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event <7>[ 49.793378] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs <7>[ 49.793625] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event <7>[ 49.793657] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7>[ 49.794004] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 49.794686] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7>[ 49.794725] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:HDMI-A-2] adding connector to sysfs <7>[ 49.794978] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:HDMI-A-2] generating connector hotplug event <7>[ 49.795010] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:547:DP-3] adding connector to sysfs <7>[ 49.795562] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 49.796161] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:547:DP-3] generating connector hotplug event <7>[ 49.796200] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:556:DP-4] adding connector to sysfs <7>[ 49.796866] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 49.797868] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:556:DP-4] generating connector hotplug event <6>[ 49.797899] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 49.800237] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 49.813030] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 49.816529] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 49.818014] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 49.818254] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 49.818702] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 49.818708] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 49.819618] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:34:plane 1A] <7>[ 49.819816] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 49.819979] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <6>[ 49.820024] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 49.820165] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 49.820316] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:34:plane 1A] for BIOS fb <7>[ 49.820470] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 49.820614] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:34:plane 1A] (20738048 >= 20736000) <7>[ 49.820686] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 49.820757] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 49.820899] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 49.821093] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 49.821293] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 49.821758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 49.821700] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 49.823980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 49.825242] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 49.825838] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 49.825847] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 49.826044] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.826228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 49.830435] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.830593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 49.831102] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.831383] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.831560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 49.831918] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 49.836107] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.836299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 49.836552] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.836769] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:547:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.836945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 49.837200] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 49.837429] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:556:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 49.837627] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 49.837782] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 49.837870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 49.838954] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.839565] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 49.839916] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 49.840157] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 49.840504] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.840511] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 49.840517] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 49.840553] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 49.840798] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 49.841029] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 49.842092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected <7>[ 49.842502] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 49.843020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 49.843030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.843036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 49.843041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 49.847376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 49.847385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 49.847391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 49.851748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 49.851756] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 49.851761] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 49.852363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 49.852369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 49.852374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 49.856864] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 49.856872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 49.856877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 49.857281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 49.857287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 49.857291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 49.857700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 49.857706] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 49.857711] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 49.857715] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 49.857718] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 49.857721] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 49.857724] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 49.857727] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 49.857878] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 49.857904] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 49.857909] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 49.857926] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 49.858063] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 49.858092] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 49.858409] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 49.860179] fbcon: i915drmfb (fb0) is primary device <7>[ 49.862567] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 49.862896] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 49.863154] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 49.863423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 49.863738] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 49.864003] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 49.864270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 49.864528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 49.864787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.865047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: no, <7>[ 49.865290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 49.865542] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.865791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.866037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 49.866284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.866535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.866782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 49.867028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 49.867275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 49.867522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.867769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7>[ 49.868011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.868256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.868510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 49.868774] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.869029] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.869281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.869537] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.869785] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.870045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.870295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 49.870550] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 49.870816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 49.871076] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 49.871324] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 49.871834] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 49.872019] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.872187] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 49.872357] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 49.872536] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.872683] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.872829] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.872975] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.873123] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.873269] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.873420] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.873560] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.873721] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.873879] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874034] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874177] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874316] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.874469] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874623] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874794] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.874965] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 49.875129] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.875288] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.875447] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 49.875626] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 49.875822] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.875994] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.876146] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 49.876290] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 49.876480] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 49.876643] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 49.876810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 49.876871] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.876972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 49.877128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 49.877164] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.877282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 49.877432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 49.877432] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.877583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 49.877684] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 49.877744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 49.877896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 49.878045] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 49.877941] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.878191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 49.878305] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.878352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 49.878503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 49.878509] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.878653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 49.878674] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 49.878803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 49.878846] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.878953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 49.879035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.879102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 49.879218] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.879265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 49.879413] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 49.879442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 49.879578] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.879594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 49.879733] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.879740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 49.879886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 49.879889] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.880032] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 49.880049] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 49.880179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 49.880208] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.880328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 49.880380] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.880477] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 49.880565] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.880626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.880719] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 49.880775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.880871] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.880925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.881028] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.881075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.881203] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.881224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.881378] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 49.881392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 49.881535] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.881543] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 49.881691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 49.881692] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.881844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 49.881875] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.882000] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 49.882090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 49.882168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.882293] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.882347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7>[ 49.882460] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.882506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 49.882621] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.882660] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 49.882782] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 49.882818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 49.882956] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.882983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.883129] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.883151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 49.883308] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.883327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.883469] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 49.883482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.883633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 49.883788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 49.883987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 49.884238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 49.884478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.884707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.884942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.885184] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.885428] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.885649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.885864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.886077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.886249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.886404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.886563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 49.886724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:565] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 49.886884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 49.887037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 49.887186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 49.887397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 49.887559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 49.887734] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 49.887904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <6>[ 49.888532] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 49.889928] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 49.892854] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <7>[ 49.893789] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 49.894074] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 49.909155] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 49.929719] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 49.929919] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.098906] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0 <7>[ 50.100163] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.106826] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.106960] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.107477] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short <7>[ 50.107582] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.108243] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.158570] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.159550] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.159495] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 50.159935] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.160644] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 50.161251] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.161544] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.161823] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.162052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.162734] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7>[ 50.163082] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.163330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7>[ 50.163551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7>[ 50.163762] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7>[ 50.163950] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7>[ 50.164122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7>[ 50.164280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7>[ 50.164422] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7>[ 50.164561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7>[ 50.164699] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7>[ 50.164837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7>[ 50.164988] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7>[ 50.165125] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7>[ 50.165264] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3] <7>[ 50.165402] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A] <7>[ 50.165539] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B] <7>[ 50.165675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C] <7>[ 50.165810] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D] <7>[ 50.165956] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4] <7>[ 50.166095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A] <7>[ 50.166232] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B] <7>[ 50.166368] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C] <7>[ 50.166505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D] <7>[ 50.166734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.167903] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 50.168105] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.169985] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.170167] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 50.390324] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 50.660906] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 50.681271] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.681919] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 50.682567] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 50.713680] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.714334] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 50.714918] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 50.715513] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.852365] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.852655] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.853051] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.853323] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 50.883232] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.884232] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.884877] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 50.888496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.889693] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 50.890383] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 50.891428] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 50.892317] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 50.893287] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 50.893425] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 50.894778] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 50.894911] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 50.895538] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 50.895811] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 50.895962] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 50.896159] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 192000 <7>[ 50.906976] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 50.908653] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7>[ 50.908908] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7>[ 50.910545] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 50.912064] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 50.912698] Console: switching to colour frame buffer device 180x56 <7>[ 50.912686] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 50.913445] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:507:eDP-1] set backlight level = 13892 <6>[ 50.930678] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 50.930729] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.930738] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.930687] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 50.930907] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 50.931093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 50.931086] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 50.931110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 50.931306] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 50.931650] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 50.931813] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 50.931989] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 50.932074] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.932190] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 50.932423] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 50.932614] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.932628] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 50.932831] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.932843] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 50.933052] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.933056] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 50.933358] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.933363] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 50.933267] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 50.933371] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 50.933398] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 50.933474] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 50.933632] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.933708] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 50.933839] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.933915] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 50.934130] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 50.934369] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 50.934601] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 50.934828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 50.934838] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.934843] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 50.934766] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 50.934847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.934965] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 50.935184] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 50.935927] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 50.936104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 50.936356] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7>[ 50.937155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 50.937349] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7>[ 50.937966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 50.938140] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7>[ 50.938383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 50.938735] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 50.938874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 50.939010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 50.939095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 50.939101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 50.939104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.939141] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 50.939272] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 50.939400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 50.939550] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 50.939676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 50.939802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 50.939927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 50.940052] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 50.940178] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 50.940301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 50.940422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 50.940555] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 50.940677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 50.940796] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 50.940916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 50.941039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 50.941163] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 50.941284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 50.941405] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 50.941535] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 50.941659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 50.941781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 50.941901] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 50.942022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 50.942143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 50.942265] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 50.942387] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 50.942521] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 50.942641] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 50.942759] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 50.942878] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 50.942997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 50.943117] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 50.943293] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 50.943236] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 50.943299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 50.943302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.943355] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 50.943496] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 50.943619] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 50.943666] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.943740] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 50.943902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 50.943906] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 50.943860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 50.943910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.943980] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 50.944101] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 50.944222] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 50.944232] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.944344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 50.944479] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 50.944598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 50.944717] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 50.944837] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 50.944959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 50.945081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 50.945203] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.945323] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 50.945454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 50.945579] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.945699] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.945820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.945938] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.946057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 50.946179] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 50.946301] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 50.946424] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 50.946544] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 50.946663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 50.946783] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 50.946904] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 50.947024] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 50.947143] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 50.947265] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 50.947265] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 50.947266] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 50.948471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 50.948476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 50.948480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.948746] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.948955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 50.948958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 50.948961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.949186] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.949388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 50.949404] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 50.949407] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 50.949409] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 50.949411] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 50.949413] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 50.949415] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 50.949417] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 50.949562] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.949577] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 50.949579] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.949602] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.952059] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 50.973739] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 50.973760] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.974535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 50.974561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 50.975902] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.976540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.976746] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.976937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.977253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.977260] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 50.977268] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 50.977301] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 50.977502] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.977688] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.978858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 50.978869] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.978875] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 50.978879] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.983142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 50.983148] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 50.983153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.987427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 50.987433] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 50.987438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.987939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 50.987944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 50.987948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.992330] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 50.992337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 50.992341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.992720] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 50.992724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 50.992728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.993100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 50.993105] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 50.993109] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 50.993112] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 50.993115] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 50.993118] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 50.993120] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 50.993123] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 50.993258] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.993277] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 50.993281] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 50.993333] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.996323] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.000777] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.007184] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.040724] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.040851] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.043530] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.073874] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.073948] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.074187] [IGT] i915_module_load: exiting, ret=0 <7>[ 51.993117] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.994024] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.994059] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.993969] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.517377] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD off <7>[ 53.518307] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 53.518605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 53.519707] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 53.520205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02