igt@i915_module_load@reload on bat-mtlp-9@CI_DRM

Detail	Value
Duration	6.08 seconds
Igt-Version	IGT-Version: 2.3-gb7cc5ebfe (x86_64) (Linux: 6.19.0-rc8-CI_DRM_17926-g4155204a236e+ x86_64)
Out	Using IGT_SRANDOM=1770140933 for randomisation Starting subtest: reload Opened device: /dev/dri/card0 Subtest reload: SUCCESS (6.079s)
Err	Starting subtest: reload Subtest reload: SUCCESS (6.079s)
Dmesg	<7> [397.875860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [397.876267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [397.876724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [397.882657] Console: switching to colour dummy device 80x25 <6> [397.882982] [IGT] i915_module_load: executing <6> [397.890427] [IGT] i915_module_load: starting subtest reload <7> [397.937003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [397.937778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [397.937996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [397.938156] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [397.950601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [397.950778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [397.950957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [397.951098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [397.976997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [397.977799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [397.978003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [397.978157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [397.990597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [397.990804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [397.990997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [397.991168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [398.041205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [398.042002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [398.042201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [398.042358] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [398.058780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [398.058938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [398.059074] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [398.059209] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [398.059341] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [398.059488] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [398.059622] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [398.059759] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [398.059905] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [398.060037] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [398.060167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [398.060300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [398.060429] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [398.060559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [398.060689] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [398.060826] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [398.060955] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [398.061084] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [398.061217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [398.061346] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [398.061475] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [398.061602] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [398.061729] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [398.061891] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [398.062025] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [398.062154] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [398.062283] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [398.062414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [398.062544] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [398.062673] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [398.062806] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [398.062937] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [398.063068] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [398.063195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [398.063323] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [398.063453] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [398.063776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [398.063950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [398.064113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [398.064250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [398.187937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [398.189046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [398.189712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [398.190022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [398.190324] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [398.190557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [398.190757] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x80000000) <7> [398.191007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [398.191219] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [398.192014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:508] is removed <7> [398.192069] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0 <7> [398.192299] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [398.192463] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.192614] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.192756] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [398.192931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [398.193085] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200 <7> [398.193231] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [398.193365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 0 qgv_peak_bw: 51200 <7> [398.193507] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [398.193649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0 <7> [398.193912] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2 <7> [398.194282] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7> [398.194536] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7> [398.205498] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [398.205953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [398.206092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [398.206225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [398.206357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [398.206488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0) <7> [398.206622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [398.206756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [398.206917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [398.207047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [398.207179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [398.207312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [398.207440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [398.207567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [398.207696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.207840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0) <7> [398.207974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [398.208109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [398.208239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0) <7> [398.208371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0) <7> [398.208503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [398.208634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [398.208765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [398.208928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [398.209061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [398.209194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [398.209327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [398.209457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0) <7> [398.209587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [398.209720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [398.209862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0) <7> [398.209991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0) <7> [398.210120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [398.210250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [398.210379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [398.210508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [398.210637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [398.210769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0) <7> [398.210915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0) <7> [398.211044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [398.211176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7> [398.211307] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [398.211437] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7> [398.211597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [398.211728] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [398.211889] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0 <7> [398.212027] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 256910 kHz -> 0 kHz <7> [398.212161] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing <7> [398.212291] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [398.212419] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [398.212563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset] <7> [398.212694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [398.212838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [398.212971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [398.213101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [398.213231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [398.213361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [398.213620] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [398.419272] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0 <7> [398.420191] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [398.428291] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off <7> [398.428662] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time <7> [398.428733] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7> [398.429074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [398.429547] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short <7> [398.478973] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [398.479326] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [398.479558] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A] <7> [398.480648] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [398.481161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [398.481107] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [398.481564] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7> [398.481908] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7> [398.481871] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7> [398.482206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7> [398.482495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7> [398.482661] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7> [398.482561] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [398.482859] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7> [398.483040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7> [398.483324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7> [398.483366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7> [398.483680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7> [398.483911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7> [398.484079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7> [398.484223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7> [398.484365] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:544:DP-MST A] <7> [398.484500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DP-MST B] <7> [398.484635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DP-MST C] <7> [398.484764] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST D] <7> [398.484907] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DDI TC3/PHY TC3] <7> [398.485087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:553:DP-MST A] <7> [398.485257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DP-MST B] <7> [398.485381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DP-MST C] <7> [398.485505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST D] <7> [398.485628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DDI TC4/PHY TC4] <7> [398.485751] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:562:DP-MST A] <7> [398.485888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:563:DP-MST B] <7> [398.486015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:564:DP-MST C] <7> [398.486137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:565:DP-MST D] <7> [398.486260] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7> [398.486460] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no) <7> [398.486611] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: ) <7> [398.486746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [398.487022] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [398.487473] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Post changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [398.487649] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=432 <7> [398.487809] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000010 0xad00071) <7> [398.537447] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [398.539158] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [398.563341] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:507:eDP-1] removing connector from sysfs <7> [398.564353] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:516:DP-1] removing connector from sysfs <7> [398.564568] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:528:HDMI-A-1] removing connector from sysfs <7> [398.565902] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:534:DP-2] removing connector from sysfs <7> [398.566508] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:543:DP-3] removing connector from sysfs <7> [398.567132] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:552:DP-4] removing connector from sysfs <7> [398.567787] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:561:DP-5] removing connector from sysfs <7> [398.608731] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (371 ms remaining) <7> [398.987290] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [399.027915] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [399.088503] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_unbind [i915]] GT1: GSC proxy mei component unbound <7> [399.249896] i915 0000:00:02.0: [drm:intel_uncore_fini_mmio [i915]] Triggering Driver-FLR <5> [400.170615] Setting dangerous option force_probe - tainting kernel <6> [400.175556] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7> [400.176634] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7> [400.176861] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7> [400.177027] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7> [400.177204] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [400.177393] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [400.177553] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7> [400.177722] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7> [400.177949] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [400.178214] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7> [400.178818] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7> [400.178966] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7> [400.179348] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7> [400.179498] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7> [400.179853] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7> [400.180097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [400.180232] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7> [400.180360] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6> [400.180484] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [400.180499] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [400.180699] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [400.180710] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7> [400.180897] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7> [400.181248] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7> [400.181492] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 15409 MiB [mem 0x00000000-0x3c314afff], io: n/a <7> [400.181622] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7> [400.181975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7> [400.182158] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7> [400.182315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [400.182466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [400.182606] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [400.182741] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7> [400.182904] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [400.183070] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR5 <7> [400.183237] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [400.183387] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7> [400.183534] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [400.183691] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=52 tRDPRE=24 tRAS=104 tRCD=52 tRC=156 <7> [400.183868] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4800 tRP=78 tRDPRE=36 tRAS=154 tRCD=78 tRC=232 <7> [400.184028] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=4400 tRP=72 tRDPRE=34 tRAS=142 tRCD=72 tRC=214 <7> [400.184201] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=4800 tRP=78 tRDPRE=36 tRAS=154 tRCD=78 tRC=232 <7> [400.184356] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=23783 peakbw: 51200 <7> [400.184498] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=28357 peakbw: 76800 <7> [400.184641] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=27215 peakbw: 70400 <7> [400.184800] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=28357 peakbw: 76800 <7> [400.184950] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=31374 peakbw: 51200 <7> [400.185101] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.185248] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400 <7> [400.185396] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.185544] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=37331 peakbw: 51200 <7> [400.185689] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.185843] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400 <7> [400.185983] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.186126] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7> [400.186274] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.186420] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400 <7> [400.186561] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.186701] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7> [400.186849] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.186988] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400 <7> [400.187134] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.187284] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7> [400.187431] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.187571] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400 <7> [400.187710] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [400.188707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [400.188944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7> [400.189107] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [400.189260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7> [400.189405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [400.189548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [400.189692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7> [400.189852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [400.190011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [400.190192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [400.190349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [400.190489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [400.190631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7> [400.190783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [400.190931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [400.191095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [400.191257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [400.191396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [400.191539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [400.191677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [400.191842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [400.191997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [400.192150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [400.192303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [400.192455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [400.192599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [400.192737] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [400.192890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [400.193050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [400.193213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [400.193382] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [400.193553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [400.193788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [400.194006] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [400.194178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [400.194461] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [400.194710] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7> [400.194901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [400.195047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [400.195196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [400.195398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [400.195724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [400.195964] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [400.196133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [400.196341] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [400.196485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [400.196678] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [400.196833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [400.197027] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [400.197596] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7> [400.198195] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [400.198345] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7> [400.198488] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [400.198630] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7> [400.198782] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7> [400.198928] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7> [400.199100] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7> [400.199258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7> [400.199398] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7> [400.199537] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7> [400.199679] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7> [400.199834] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7> [400.199977] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7> [400.200118] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7> [400.200258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [400.200397] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7> [400.200545] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7> [400.200685] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7> [400.200835] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7> [400.200973] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7> [400.201118] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7> [400.201271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7> [400.201413] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7> [400.201552] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7> [400.201691] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [400.201841] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7> [400.202051] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7> [400.202149] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [400.202268] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7> [400.202473] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7> [400.202625] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7> [400.202913] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [400.203139] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7> [400.203170] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7> [400.203349] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7> [400.203404] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [400.203551] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7> [400.203618] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7> [400.203766] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7> [400.203842] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7> [400.203973] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7> [400.204055] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7> [400.204180] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7> [400.204263] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7> [400.204393] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7> [400.204477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7> [400.204666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7> [400.204844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7> [400.204990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7> [400.205136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7> [400.205283] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7> [400.205427] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <6> [400.214061] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7> [400.215607] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7> [400.229160] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [400.229693] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [400.230058] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7> [400.230428] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT) <7> [400.230885] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A] <7> [400.231216] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [400.231549] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [400.231879] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [400.232242] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [400.232634] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [400.233031] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [400.233425] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [400.233827] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [400.234145] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [400.234559] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0 <7> [400.235005] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [400.235314] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [400.235604] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [400.235902] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [400.236186] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [400.236616] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [400.237107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [400.238992] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7> [400.239419] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [400.239848] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [400.250205] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [400.250670] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [400.251054] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [400.461193] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7> [400.461834] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [400.462786] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7> [400.464511] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7> [400.465172] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7> [400.466651] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [400.473230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [400.473237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7> [400.473240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7> [400.473288] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [400.473801] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms) <7> [400.474312] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [400.474509] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none <7> [400.474839] i915 0000:00:02.0: [drm:get_vbt_pwm_freq [i915]] VBT defined backlight frequency 200 Hz <7> [400.475006] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [400.475193] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [400.475487] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [400.475644] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [400.475816] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [400.475959] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [400.476102] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [400.476414] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [400.476733] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT) <7> [400.476998] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B] <7> [400.477479] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B] <7> [400.477648] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [400.477938] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [400.478215] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt) <7> [400.478683] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: C max lanes: 4 <7> [400.478873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1] <7> [400.479208] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [400.479434] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [400.479669] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:542:DDI TC2/PHY TC2] <7> [400.479989] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:551:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [400.480217] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [400.480458] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:551:DDI TC3/PHY TC3] <7> [400.480771] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:560:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7> [400.481008] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [400.481268] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:560:DDI TC4/PHY TC4] <7> [400.481728] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6> [400.481910] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem <7> [400.482433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: disabled <7> [400.482780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7> [400.483111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7> [400.483451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled <7> [400.483621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [400.483792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7> [400.483950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7> [400.484111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7> [400.484271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7> [400.484432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7> [400.484595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [400.484764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [400.484929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [400.485105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [400.485280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [400.485439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [400.485597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7> [400.485789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7> [400.485949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7> [400.486109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7> [400.486267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7> [400.486426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7> [400.486586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D <7> [400.486747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D <7> [400.486906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D <7> [400.487065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D <7> [400.487222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D <7> [400.487379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D <7> [400.487540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: disabled, pipe A <7> [400.487701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A <7> [400.487862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A <7> [400.488014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B <7> [400.488168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C <7> [400.488319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D <7> [400.488794] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: C max lanes: 4 <7> [400.488965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [400.489126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7> [400.489284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7> [400.489435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7> [400.489581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7> [400.489748] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [400.489900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [400.490047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A <7> [400.490192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B <7> [400.490338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C <7> [400.490482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D <7> [400.490639] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [400.490797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [400.490944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:553:DP-MST A] hw state readout: disabled, pipe A <7> [400.491089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DP-MST B] hw state readout: disabled, pipe B <7> [400.491233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DP-MST C] hw state readout: disabled, pipe C <7> [400.491377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST D] hw state readout: disabled, pipe D <7> [400.491535] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [400.491686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7> [400.491841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:562:DP-MST A] hw state readout: disabled, pipe A <7> [400.492011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:563:DP-MST B] hw state readout: disabled, pipe B <7> [400.492185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:564:DP-MST C] hw state readout: disabled, pipe C <7> [400.492339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:565:DP-MST D] hw state readout: disabled, pipe D <7> [400.492491] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [400.492653] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [400.492819] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [400.493002] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [400.493191] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [400.493354] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [400.493509] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [400.493694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: disabled <7> [400.493875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled <7> [400.494077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled <7> [400.494261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled <7> [400.494427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:DP-3] hw state readout: disabled <7> [400.494591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:552:DP-4] hw state readout: disabled <7> [400.494763] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:561:DP-5] hw state readout: disabled <7> [400.494911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [400.495057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7> [400.495203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7> [400.495348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7> [400.495492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7> [400.495636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7> [400.495809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 0 kHz <7> [400.495970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [400.496114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [400.496257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [400.496399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [400.496546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [400.496692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [400.496848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [400.497015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7> [400.497177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7> [400.497324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7> [400.497465] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7> [400.497608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7> [400.497756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7> [400.497900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7> [400.498044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz <7> [400.498187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz <7> [400.498328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz <7> [400.498471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz <7> [400.498617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz <7> [400.498770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz <7> [400.498918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz <7> [400.499065] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [400.499218] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [400.499370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [400.499517] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [400.499663] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [400.499836] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [400.500016] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [400.500182] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7> [400.500397] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no <7> [400.500680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [setup_hw_state] <7> [400.500854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [400.501037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7> [400.501203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state] <7> [400.501356] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7> [400.502565] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7> [400.504850] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7> [400.505025] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [0, fee00000] <7> [400.505185] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [400.505326] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7> [400.505471] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7> [400.505607] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7> [400.505790] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [400.508231] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7> [400.508394] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7> [400.508541] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7> [400.509418] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7> [400.509572] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7> [400.509965] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7> [400.510115] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7> [400.511095] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [400.511270] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7> [400.511437] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [400.533905] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7> [400.534095] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7> [400.534243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [400.534385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [400.534526] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7> [400.534665] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7> [400.534845] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [400.534982] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [400.535118] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [400.535252] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [400.535385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [400.535521] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [400.535656] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [400.535823] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6> [400.536846] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7> [400.548806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 750MHz -> 1800MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7> [400.549896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [400.552597] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [400.552599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [400.553056] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [400.553438] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7> [400.554273] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x00D05000 <7> [400.562199] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7> [400.562373] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7> [400.563320] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7> [400.563482] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7> [400.564277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7> [400.564433] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7> [400.565054] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7> [400.565201] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7> [400.566273] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7> [400.566430] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7> [400.568190] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [400.568375] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7> [400.568541] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7> [400.589559] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0604f <7> [400.589752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7> [400.589908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7> [400.590053] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7> [400.590193] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220e <7> [400.590331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7> [400.590468] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7> [400.590604] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7> [400.590748] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7> [400.590892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7> [400.591030] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7> [400.591168] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7> [400.591305] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7> [400.591440] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7> [400.591577] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7> [400.595707] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6> [400.595906] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6> [400.596483] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6> [400.596485] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7> [400.609796] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 11ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7> [400.610067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7> [400.618805] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6> [400.618987] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6> [400.619901] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6> [400.619902] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6> [400.620098] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7> [400.620294] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7> [400.621318] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7> [400.627272] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [400.627490] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [400.627689] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [400.627907] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7> [400.628094] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [400.628294] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7> [400.628504] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6> [400.630303] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7> [400.631872] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7> [400.632038] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7> [400.632192] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7> [400.632343] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7> [400.632490] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7> [400.632637] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [400.632792] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [400.632936] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [400.633080] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [400.633223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [400.633369] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008 <7> [400.633518] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108 <7> [400.633659] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208 <7> [400.633811] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308 <7> [400.633953] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8 <7> [400.634094] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008 <7> [400.634237] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108 <7> [400.634377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208 <7> [400.634519] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308 <7> [400.634660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8 <7> [400.634943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200 <7> [400.635100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [400.635249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 0 qgv_peak_bw: 51200 <7> [400.635394] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200 <7> [400.635535] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0 <7> [400.635709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [fastset] <7> [400.635878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7> [400.636024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7> [400.636172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset] <7> [400.636463] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000010 0xad00071) <7> [400.636813] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [400.637217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7> [400.637531] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7> [400.637854] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D] <7> [400.641104] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs <7> [400.641965] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered <7> [400.642133] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [400.642456] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [400.643976] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event <7> [400.644022] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs <7> [400.644430] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [400.645262] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event <7> [400.645302] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs <7> [400.645540] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event <7> [400.645571] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7> [400.645950] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7> [400.646613] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7> [400.646648] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs <7> [400.647012] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3 <7> [400.647672] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event <7> [400.647705] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:552:DP-4] adding connector to sysfs <7> [400.648071] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-4 <7> [400.648620] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:552:DP-4] generating connector hotplug event <7> [400.648653] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:561:DP-5] adding connector to sysfs <7> [400.648999] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-5 <7> [400.649772] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:561:DP-5] generating connector hotplug event <6> [400.649803] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [400.652140] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6> [400.662655] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [400.665199] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15 <7> [400.665735] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [400.665941] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=432 <7> [400.667048] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] not active, skipping <7> [400.667211] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7> [400.667361] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7> [400.667512] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7> [400.667660] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [400.668643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7> [400.668916] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [400.671352] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [400.672991] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [400.673183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7> [400.677450] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [400.677607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7> [400.678266] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: C max lanes: 4 <7> [400.678730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1 <7> [400.701196] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.723590] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.745483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <6> [400.769438] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7> [400.769866] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.789964] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1100MHz -> 1100MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6> [400.790199] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7> [400.791706] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.813522] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.835220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.856966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.878761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.900559] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.922350] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.944163] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.965913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [400.987666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.009416] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.031168] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.052913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.074660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.096424] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.118200] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.139913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.161664] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.183452] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.205173] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.226955] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.230806] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7> [401.248713] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.270558] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.292334] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.314108] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.335873] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.357653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.379472] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.379675] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110 <7> [401.379715] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [401.379957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3] <7> [401.380251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1 <7> [401.380822] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [401.381087] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [401.381309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4] <7> [401.381648] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [401.381940] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:552:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7> [401.382104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5] <7> [401.382389] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [401.382615] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:561:DP-5] status updated from unknown to disconnected (epoch counter 0->1) <7> [401.382788] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [401.382802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7> [401.382811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7> [401.383694] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [401.384264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [401.384422] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [401.384593] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [401.384767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [401.384773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7> [401.384775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7> [401.384797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7> [401.384939] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [401.385074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [401.386194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected <7> [401.386269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7> [401.386273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [401.386277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7> [401.386281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7> [401.386525] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [401.390523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7> [401.390528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7> [401.390533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7> [401.394750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7> [401.394755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [401.394758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7> [401.395333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1 <7> [401.418175] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.440089] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.461874] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.483625] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.505412] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.527192] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.548976] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.570756] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.592511] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.614354] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.636134] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.657893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.679640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.701429] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.723207] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.744963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.766742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.788528] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.810313] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.832065] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.853843] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.875631] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.897420] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.919160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.940910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.962658] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [401.984443] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.006227] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.027980] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.049731] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.071514] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.093291] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.093491] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110 <7> [402.093514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [402.093520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [402.093525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3] <7> [402.093905] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [402.093909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] <7> [402.093914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4] <7> [402.094301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected <7> [402.094306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] <7> [402.094309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5] <7> [402.094573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected <7> [402.094576] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7> [402.094580] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7> [402.094583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7> [402.094585] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [402.094587] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [402.094589] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no <7> [402.094590] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no <7> [402.094623] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [402.094638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7> [402.094641] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [402.094650] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7> [402.094726] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [402.094749] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [402.101343] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x01d37000 <6> [402.102210] fbcon: i915drmfb (fb0) is primary device <7> [402.102843] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [402.103019] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [402.103175] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7> [402.103333] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [402.103492] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A] <7> [402.103638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [402.103806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [402.103957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [402.104105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [402.104249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288) <7> [402.104392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [402.104548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [402.104695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [402.104861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [402.105002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [402.105146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [402.105289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [402.105428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [402.105571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [402.105718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801) <7> [402.105863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [402.106006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [402.106150] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878) <7> [402.106290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878) <7> [402.106429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [402.106568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [402.106707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [402.106860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [402.107014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [402.107157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [402.107303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [402.107452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801) <7> [402.107593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [402.107739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [402.107885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878) <7> [402.108027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878) <7> [402.108168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [402.108308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [402.108448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [402.108592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [402.108739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7> [402.108881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [402.109028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [402.109170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c20pll_hw_state: <7> [402.109313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [402.109454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [402.109596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[0] = 0x0000 <7> [402.109743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[1] = 0x0000 <7> [402.109887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[2] = 0x0000 <7> [402.110035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[3] = 0x0000 <7> [402.110177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[4] = 0x0000 <7> [402.110316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[5] = 0x0000 <7> [402.110458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[6] = 0x0000 <7> [402.110601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[7] = 0x0000 <7> [402.110768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[8] = 0x0000 <7> [402.110912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[9] = 0x0000 <7> [402.111059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mpllb[10] = 0x0000 <7> [402.111200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [402.111340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [402.111481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [402.111624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7> [402.111775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7> [402.111916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7> [402.112059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7> [402.112197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7> [402.112336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7> [402.112479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [402.112620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [402.112771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7> [402.112921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7> [402.113085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [402.113237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820) <7> [402.113385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820) <7> [402.113528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [402.113671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7> [402.113822] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [402.114013] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [402.114165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [402.114315] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7> [402.114463] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7> [402.114608] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [402.114760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7> [402.114898] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7> [402.115036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7> [402.115187] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1 <7> [402.115342] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200 <7> [402.115491] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [402.115637] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 2159 qgv_peak_bw: 51200 <7> [402.115791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200 <7> [402.115942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7> [402.116106] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 256910 kHz <7> [402.116274] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 32114 kHz <7> [402.116418] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing <7> [402.116560] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [402.116702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [402.116872] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7> [402.117030] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7> [402.117182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7> [402.117332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [402.117480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [402.117627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [402.117781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [402.117925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [402.118066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [402.118207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7> [402.118347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [402.118489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [402.118632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [402.118823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [402.118967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [402.119108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [402.119251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7> [402.119395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [402.119537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [402.119676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [402.119832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [402.119985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [402.120130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [402.120271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7> [402.120413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7> [402.120556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7> [402.120696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [402.120859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [402.121006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [402.121147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7> [402.121287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7> [402.121431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7> [402.121573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7> [402.121721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7> [402.121862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [402.122013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [402.122162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [402.122309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [402.122451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7> [402.122591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7> [402.122745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7> [402.122890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7> [402.123033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7> [402.123174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7> [402.123314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [402.123454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [402.123592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7> [402.123739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7> [402.123882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [402.124026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [402.124168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [402.124312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.124452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.124593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.124740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [402.124879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [402.125027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.125171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.125314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [402.125455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [402.125595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [402.125740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:508] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [402.125884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [402.126033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [402.126178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [402.126320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [402.126460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [402.126600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [402.126749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [402.127323] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <7> [402.127654] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [402.127988] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7> [402.128142] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7> [402.128295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7> [402.128443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7> [402.128591] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7> [402.128745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7> [402.128888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7> [402.129029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7> [402.129169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7> [402.129307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7> [402.129445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7> [402.129586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7> [402.129734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7> [402.129874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:544:DP-MST A] <7> [402.130014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DP-MST B] <7> [402.130153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DP-MST C] <7> [402.130292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST D] <7> [402.130428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DDI TC3/PHY TC3] <7> [402.130565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:553:DP-MST A] <7> [402.130703] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DP-MST B] <7> [402.130856] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DP-MST C] <7> [402.130995] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST D] <7> [402.131138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DDI TC4/PHY TC4] <7> [402.131276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:562:DP-MST A] <7> [402.131413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:563:DP-MST B] <7> [402.131551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:564:DP-MST C] <7> [402.131687] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:565:DP-MST D] <7> [402.131867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7> [402.132177] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: ) <7> [402.132332] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [402.132590] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [402.132755] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [402.134819] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on <7> [402.135051] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [402.135304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [402.144782] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [402.145044] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on <7> [402.145288] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [402.194848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1 <7> [402.346075] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [402.350207] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7> [402.351507] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [402.352191] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7> [402.353443] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [402.354327] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [402.355345] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK <7> [402.355525] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [402.356914] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [402.357059] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [402.357701] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [402.358147] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [402.358320] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [402.358558] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 4518 <7> [402.369882] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7> [402.372429] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7> [402.372993] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7> [402.375000] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [402.376781] Console: switching to colour frame buffer device 180x56 <6> [402.392954] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [402.392960] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7> [402.393126] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7> [402.393276] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [402.393423] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7> [402.393578] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7> [402.393731] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [402.393882] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [402.394031] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7> [402.394178] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [402.394322] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [402.394465] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [402.394612] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [402.394764] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [402.394910] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [402.395055] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [402.395199] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7> [402.395340] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [402.395482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [402.395624] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [402.395775] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [402.395917] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7> [402.396061] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7> [402.396571] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [402.396752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7> [402.396959] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7> [402.397221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7> [402.397380] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [402.397570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7> [402.397737] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [402.397926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [402.398155] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7> [402.398290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7> [402.398422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7> [402.398549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7> [402.398671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7> [402.398807] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7> [402.398928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7> [402.399048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7> [402.399164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7> [402.399280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [402.399397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [402.399514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7> [402.399630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [402.399759] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [402.399873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [402.399989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [402.400109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [402.400227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [402.400344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [402.400459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [402.400574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [402.400689] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7> [402.400820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7> [402.400935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [402.401049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [402.401162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [402.401276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7> [402.401391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7> [402.401514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [402.401628] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [402.401751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7> [402.401864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [402.401979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7> [402.402094] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [402.402208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [402.402322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7> [402.402435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7> [402.402553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7> [402.402672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [402.402817] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7> [402.402930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [402.403043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [402.403156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [402.403271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [402.403385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7> [402.403498] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7> [402.403611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [402.403741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [402.403856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [402.403970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [402.404083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [402.404196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7> [402.404311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7> [402.404433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7> [402.404547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7> [402.404659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7> [402.404784] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7> [402.404898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [402.405012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [402.405126] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7> [402.405239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7> [402.405351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7> [402.405465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7> [402.405580] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7> [402.405694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7> [402.405822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7> [402.405935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [402.406047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [402.406161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6> [402.406274] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [402.406275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [402.406275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [402.424904] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [402.424917] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [402.425160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7> [402.425171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7> [402.425961] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [402.426444] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [402.426588] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [402.426725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [402.426930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [402.426934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7> [402.426939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7> [402.426959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7> [402.427090] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [402.427218] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [402.428048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7> [402.428055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [402.428059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7> [402.428062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7> [402.432302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7> [402.432307] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7> [402.432310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7> [402.436537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7> [402.436541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [402.436543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7> [402.437150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1 <7> [402.460040] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.481922] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.503673] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.525388] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.547109] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.568839] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.590552] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.612294] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.634044] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.655766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.677480] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.699205] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.720922] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.742666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.764449] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.786200] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.807917] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.829668] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.851452] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.873202] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.894920] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.916643] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.938421] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.960171] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [402.981893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.003609] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.025392] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.047141] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.068859] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.090609] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.112392] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.134150] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.134330] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110 <7> [403.134361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [403.134366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [403.134370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3] <7> [403.134749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [403.134754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] <7> [403.134758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4] <7> [403.135110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected <7> [403.135114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] <7> [403.135118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5] <7> [403.135426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected <7> [403.135429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7> [403.135432] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7> [403.135434] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7> [403.135436] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [403.135437] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [403.135439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no <7> [403.135441] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no <7> [403.135537] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [403.135555] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7> [403.135558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [403.135578] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7> [403.147975] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [403.147997] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [403.148001] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [403.148038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7> [403.148042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7> [403.148732] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [403.149263] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [403.149392] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7> [403.149543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7> [403.149721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [403.149725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7> [403.149727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7> [403.149740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7> [403.149879] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [403.150009] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [403.150965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7> [403.150970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7> [403.150974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7> [403.150977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7> [403.155206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7> [403.155210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7> [403.155212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7> [403.159451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7> [403.159455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7> [403.159457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7> [403.181389] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.203140] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.224891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.246641] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.268590] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.290372] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.312100] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.333841] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.355591] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.377342] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.399067] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.420810] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.442561] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.464311] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.486062] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.507812] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.529563] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.551315] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.573064] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.594787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.616532] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.638283] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.660000] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.681719] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.703440] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.725193] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.746937] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.768701] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.790438] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.812188] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.833909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.855659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f) <7> [403.855901] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110 <7> [403.855920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7> [403.855926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] <7> [403.855929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3] <7> [403.856284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected <7> [403.856289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] <7> [403.856293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4] <7> [403.856597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected <7> [403.856601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] <7> [403.856604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5] <7> [403.856965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected <7> [403.856968] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7> [403.856971] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7> [403.856973] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7> [403.856975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7> [403.856977] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no <7> [403.856980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no <7> [403.856982] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no <7> [403.857003] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [403.857012] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7> [403.857015] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [403.857025] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7> [403.869188] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [403.877996] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [403.878260] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [403.878809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [403.879157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [403.879703] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [403.902749] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [403.913536] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [403.913709] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [403.918718] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [403.918879] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [403.919026] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [403.919168] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7> [403.919305] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [403.919436] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [403.919568] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [403.919709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [403.919844] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [403.919978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [403.920117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [403.920251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [403.920380] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [403.920507] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [403.920639] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [403.920776] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [403.920906] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [403.921035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [403.921167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [403.921298] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7> [403.921427] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [403.921558] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [403.921695] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [403.921827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7> [403.921961] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [403.922093] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [403.922224] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [403.922355] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7> [403.922486] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [403.922616] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [403.922761] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [403.922895] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7> [403.923029] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [403.923163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [403.923293] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [403.923426] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7> [403.926671] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <6> [403.930710] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 <6> [403.933404] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 <6> [403.934541] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 <6> [403.935420] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 <7> [403.962730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1 <7> [403.969399] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [403.969834] [IGT] i915_module_load: finished subtest reload, SUCCESS <6> [403.970348] [IGT] i915_module_load: exiting, ret=0

<7> [397.875860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [397.876267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [397.876724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [397.882657] Console: switching to colour dummy device 80x25

<6> [397.890427] [IGT] i915_module_load: starting subtest reload

<7> [397.937003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [397.937778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [397.937996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [397.938156] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [397.950601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [397.950778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [397.950957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [397.951098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [397.976997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [397.977799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [397.978003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [397.978157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [397.990597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [397.990804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [397.990997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [397.991168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [398.041205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [398.042002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [398.042201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [398.042358] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [398.058780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [398.058938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [398.059074] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [398.059209] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [398.059341] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [398.059488] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [398.059622] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [398.059759] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [398.059905] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [398.060037] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [398.060167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [398.060300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [398.060429] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [398.060559] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [398.060689] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [398.060826] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [398.060955] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [398.061084] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [398.061217] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [398.061346] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [398.061475] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [398.061602] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [398.061729] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [398.061891] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [398.062025] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [398.062154] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [398.062283] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [398.062414] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [398.062544] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [398.062673] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [398.062806] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [398.062937] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [398.063068] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [398.063195] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [398.063323] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [398.063453] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [398.063776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [398.063950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [398.064113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [398.064250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [398.187937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [398.189046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [398.189712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [398.190022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [398.190324] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [398.190557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [398.190757] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x80000000)

<7> [398.191007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [398.191219] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [398.192014] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:508] is removed

<7> [398.192069] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 4001) -> ( 0 - 0), size 4001 -> 0

<7> [398.192299] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [398.192463] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.192614] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.192756] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [398.192931] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [398.193085] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200

<7> [398.193231] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [398.193365] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 0 qgv_peak_bw: 51200

<7> [398.193507] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [398.193649] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0

<7> [398.193912] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR2

<7> [398.194282] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on

<7> [398.194536] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f

<7> [398.205498] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [398.205953] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [398.206092] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [398.206225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [398.206357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [398.206488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 498869/524288, found tu 0, data 0/0 link 0/0)

<7> [398.206622] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [398.206756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [398.206917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [398.207047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [398.207179] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [398.207312] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [398.207440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [398.207567] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [398.207696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.207840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 0)

<7> [398.207974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [398.208109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [398.208239] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1878, found 0)

<7> [398.208371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1878, found 0)

<7> [398.208503] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [398.208634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [398.208765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [398.208928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [398.209061] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [398.209194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [398.209327] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [398.209457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 0)

<7> [398.209587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [398.209720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [398.209862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1878, found 0)

<7> [398.209991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1878, found 0)

<7> [398.210120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [398.210250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [398.210379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [398.210508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [398.210637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [398.210769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 513820, found 0)

<7> [398.210915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 513820, found 0)

<7> [398.211044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [398.211176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)

<7> [398.211307] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [398.211437] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0

<7> [398.211597] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [398.211728] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [398.211889] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb (4001 - 4096) -> ( 0 - 0), size 95 -> 0

<7> [398.212027] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 256910 kHz -> 0 kHz

<7> [398.212161] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing

<7> [398.212291] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [398.212419] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [398.212563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [modeset]

<7> [398.212694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [398.212838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [398.212971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [398.213101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [398.213231] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [398.213361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [398.213620] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [398.419272] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0

<7> [398.420191] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [398.428291] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off

<7> [398.428662] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [398.428733] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000

<7> [398.429074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [398.429547] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short

<7> [398.478973] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [398.479326] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [398.479558] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A]

<7> [398.480648] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [398.481161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [398.481107] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [398.481564] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]

<7> [398.481908] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]

<7> [398.481871] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long

<7> [398.482206] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]

<7> [398.482495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]

<7> [398.482661] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]

<7> [398.482561] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [398.482859] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]

<7> [398.483040] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]

<7> [398.483324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]

<7> [398.483366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A]

<7> [398.483680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]

<7> [398.483911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]

<7> [398.484079] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]

<7> [398.484223] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]

<7> [398.484365] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:544:DP-MST A]

<7> [398.484500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DP-MST B]

<7> [398.484635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DP-MST C]

<7> [398.484764] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST D]

<7> [398.484907] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DDI TC3/PHY TC3]

<7> [398.485087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:553:DP-MST A]

<7> [398.485257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DP-MST B]

<7> [398.485381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DP-MST C]

<7> [398.485505] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST D]

<7> [398.485628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DDI TC4/PHY TC4]

<7> [398.485751] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:562:DP-MST A]

<7> [398.485888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:563:DP-MST B]

<7> [398.486015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:564:DP-MST C]

<7> [398.486137] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:565:DP-MST D]

<7> [398.486260] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]

<7> [398.486460] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [398.486611] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: yes -> no (pipe: *)

<7> [398.486746] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [398.487022] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [398.487473] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Post changing CDCLK to 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [398.487649] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=432

<7> [398.487809] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000010 0xad00071)

<7> [398.537447] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [398.539158] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [398.563341] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:507:eDP-1] removing connector from sysfs

<7> [398.564353] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:516:DP-1] removing connector from sysfs

<7> [398.564568] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:528:HDMI-A-1] removing connector from sysfs

<7> [398.565902] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:534:DP-2] removing connector from sysfs

<7> [398.566508] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:543:DP-3] removing connector from sysfs

<7> [398.567132] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:552:DP-4] removing connector from sysfs

<7> [398.567787] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:561:DP-5] removing connector from sysfs

<7> [398.608731] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (371 ms remaining)

<7> [398.987290] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [399.027915] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [399.088503] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_unbind [i915]] GT1: GSC proxy mei component unbound

<7> [399.249896] i915 0000:00:02.0: [drm:intel_uncore_fini_mmio [i915]] Triggering Driver-FLR

<5> [400.170615] Setting dangerous option force_probe - tainting kernel

<6> [400.175556] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0

<7> [400.176634] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K

<7> [400.176861] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes)

<7> [400.177027] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display

<7> [400.177204] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [400.177393] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [400.177553] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT

<7> [400.177722] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K

<7> [400.177949] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [400.178214] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz

<7> [400.178818] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000

<7> [400.178966] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000

<7> [400.179348] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005

<7> [400.179498] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001

<7> [400.179853] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access

<7> [400.180097] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [400.180232] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M

<7> [400.180360] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M

<6> [400.180484] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [400.180499] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [400.180699] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [400.180710] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access

<7> [400.180897] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947

<7> [400.181248] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K

<7> [400.181492] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 15409 MiB [mem 0x00000000-0x3c314afff], io: n/a

<7> [400.181622] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff]

<7> [400.181975] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018

<7> [400.182158] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0

<7> [400.182315] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [400.182466] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [400.182606] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [400.182741] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present

<7> [400.182904] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [400.183070] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: DDR5

<7> [400.183237] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [400.183387] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4

<7> [400.183534] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [400.183691] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=52 tRDPRE=24 tRAS=104 tRCD=52 tRC=156

<7> [400.183868] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4800 tRP=78 tRDPRE=36 tRAS=154 tRCD=78 tRC=232

<7> [400.184028] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=4400 tRP=72 tRDPRE=34 tRAS=142 tRCD=72 tRC=214

<7> [400.184201] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=4800 tRP=78 tRDPRE=36 tRAS=154 tRCD=78 tRC=232

<7> [400.184356] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=23783 peakbw: 51200

<7> [400.184498] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=28357 peakbw: 76800

<7> [400.184641] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=27215 peakbw: 70400

<7> [400.184800] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=28357 peakbw: 76800

<7> [400.184950] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=31374 peakbw: 51200

<7> [400.185101] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.185248] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400

<7> [400.185396] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.185544] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=37331 peakbw: 51200

<7> [400.185689] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.185843] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400

<7> [400.185983] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.186126] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200

<7> [400.186274] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.186420] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400

<7> [400.186561] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.186701] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200

<7> [400.186849] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.186988] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400

<7> [400.187134] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.187284] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200

<7> [400.187431] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.187571] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 70400

<7> [400.187710] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [400.188707] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [400.188944] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253

<7> [400.189107] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [400.189260] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)

<7> [400.189405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [400.189548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [400.189692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850)

<7> [400.189852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [400.190011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [400.190192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [400.190349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [400.190489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [400.190631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136)

<7> [400.190783] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [400.190931] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [400.191095] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [400.191257] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [400.191396] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [400.191539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [400.191677] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [400.191842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [400.191997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [400.192150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [400.192303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [400.192455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [400.192599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [400.192737] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [400.192890] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [400.193050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [400.193213] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [400.193382] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [400.193553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [400.193788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [400.194006] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [400.194178] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [400.194461] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [400.194710] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.

<7> [400.194901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [400.195047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [400.195196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [400.195398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [400.195724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [400.195964] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [400.196133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [400.196341] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [400.196485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [400.196678] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [400.196833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [400.197027] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)

<7> [400.197596] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin

<7> [400.198195] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [400.198345] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0

<7> [400.198488] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [400.198630] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP)

<7> [400.198782] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)

<7> [400.198928] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP)

<7> [400.199100] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1:

<7> [400.199258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0

<7> [400.199398] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)

<7> [400.199537] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP)

<7> [400.199679] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)

<7> [400.199834] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP)

<7> [400.199977] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [400.200118] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP)

<7> [400.200258] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [400.200397] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP)

<7> [400.200545] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2:

<7> [400.200685] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0

<7> [400.200835] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)

<7> [400.200973] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP)

<7> [400.201118] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)

<7> [400.201271] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP)

<7> [400.201413] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [400.201552] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP)

<7> [400.201691] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [400.201841] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP)

<7> [400.202051] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3:

<7> [400.202149] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [400.202268] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0

<7> [400.202473] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [400.202625] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP)

<7> [400.202913] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [400.203139] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP)

<7> [400.203170] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us

<7> [400.203349] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4:

<7> [400.203404] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [400.203551] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0

<7> [400.203618] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec)

<7> [400.203766] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)

<7> [400.203842] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec)

<7> [400.203973] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP)

<7> [400.204055] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec)

<7> [400.204180] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling)

<7> [400.204263] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec)

<7> [400.204393] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP)

<7> [400.204477] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec)

<7> [400.204666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec)

<7> [400.204844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec)

<7> [400.204990] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec)

<7> [400.205136] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec)

<7> [400.205283] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec)

<7> [400.205427] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec)

<6> [400.214061] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)

<7> [400.215607] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available.

<7> [400.229160] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 172800 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [400.229693] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [400.230058] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz

<7> [400.230428] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT)

<7> [400.230885] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A]

<7> [400.231216] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [400.231549] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [400.231879] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [400.232242] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [400.232634] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [400.233031] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [400.233425] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [400.233827] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [400.234145] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [400.234559] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0

<7> [400.235005] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [400.235314] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [400.235604] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [400.235902] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [400.236186] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [400.236616] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [400.237107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [400.238992] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on

<7> [400.239419] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [400.239848] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [400.250205] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [400.250670] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [400.251054] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [400.461193] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80

<7> [400.461834] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [400.462786] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00

<7> [400.464511] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3

<7> [400.465172] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported

<7> [400.466651] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [400.473230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [400.473237] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor

<7> [400.473240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0

<7> [400.473288] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [400.473801] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms)

<7> [400.474312] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [400.474509] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none

<7> [400.474839] i915 0000:00:02.0: [drm:get_vbt_pwm_freq [i915]] VBT defined backlight frequency 200 Hz

<7> [400.475006] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [400.475193] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [400.475487] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [400.475644] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [400.475816] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [400.475959] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [400.476102] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [400.476414] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [400.476733] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT)

<7> [400.476998] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B]

<7> [400.477479] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B]

<7> [400.477648] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [400.477938] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [400.478215] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: dp-alt)

<7> [400.478683] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> dp-alt) pin assignment: C max lanes: 4

<7> [400.478873] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1]

<7> [400.479208] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [400.479434] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [400.479669] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:542:DDI TC2/PHY TC2]

<7> [400.479989] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:551:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [400.480217] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [400.480458] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:551:DDI TC3/PHY TC3]

<7> [400.480771] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:560:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT)

<7> [400.481008] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [400.481268] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:560:DDI TC4/PHY TC4]

<7> [400.481728] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled

<6> [400.481910] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io,decodes=io:owns=io+mem

<7> [400.482433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: disabled

<7> [400.482780] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled

<7> [400.483111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled

<7> [400.483451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled

<7> [400.483621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A

<7> [400.483792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A

<7> [400.483950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A

<7> [400.484111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A

<7> [400.484271] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A

<7> [400.484432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A

<7> [400.484595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [400.484764] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [400.484929] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [400.485105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [400.485280] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [400.485439] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [400.485597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C

<7> [400.485789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C

<7> [400.485949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C

<7> [400.486109] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C

<7> [400.486267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C

<7> [400.486426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C

<7> [400.486586] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D

<7> [400.486747] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D

<7> [400.486906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D

<7> [400.487065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D

<7> [400.487222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D

<7> [400.487379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D

<7> [400.487540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [400.487701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [400.487862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A

<7> [400.488014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B

<7> [400.488168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C

<7> [400.488319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D

<7> [400.488794] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: C max lanes: 4

<7> [400.488965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [400.489126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A

<7> [400.489284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B

<7> [400.489435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C

<7> [400.489581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D

<7> [400.489748] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [400.489900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [400.490047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:544:DP-MST A] hw state readout: disabled, pipe A

<7> [400.490192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DP-MST B] hw state readout: disabled, pipe B

<7> [400.490338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DP-MST C] hw state readout: disabled, pipe C

<7> [400.490482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST D] hw state readout: disabled, pipe D

<7> [400.490639] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [400.490797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [400.490944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:553:DP-MST A] hw state readout: disabled, pipe A

<7> [400.491089] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DP-MST B] hw state readout: disabled, pipe B

<7> [400.491233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DP-MST C] hw state readout: disabled, pipe C

<7> [400.491377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST D] hw state readout: disabled, pipe D

<7> [400.491535] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [400.491686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DDI TC4/PHY TC4] hw state readout: disabled, pipe A

<7> [400.491841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:562:DP-MST A] hw state readout: disabled, pipe A

<7> [400.492011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:563:DP-MST B] hw state readout: disabled, pipe B

<7> [400.492185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:564:DP-MST C] hw state readout: disabled, pipe C

<7> [400.492339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:565:DP-MST D] hw state readout: disabled, pipe D

<7> [400.492491] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [400.492653] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [400.492819] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [400.493002] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [400.493191] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [400.493354] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [400.493509] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [400.493694] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: disabled

<7> [400.493875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled

<7> [400.494077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled

<7> [400.494261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled

<7> [400.494427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:DP-3] hw state readout: disabled

<7> [400.494591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:552:DP-4] hw state readout: disabled

<7> [400.494763] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:561:DP-5] hw state readout: disabled

<7> [400.494911] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 0 kHz

<7> [400.495057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz

<7> [400.495203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz

<7> [400.495348] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz

<7> [400.495492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz

<7> [400.495636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz

<7> [400.495809] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 0 kHz

<7> [400.495970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [400.496114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [400.496257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [400.496399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [400.496546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [400.496692] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [400.496848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [400.497015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz

<7> [400.497177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz

<7> [400.497324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz

<7> [400.497465] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz

<7> [400.497608] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz

<7> [400.497756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz

<7> [400.497900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz

<7> [400.498044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz

<7> [400.498187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz

<7> [400.498328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz

<7> [400.498471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz

<7> [400.498617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz

<7> [400.498770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz

<7> [400.498918] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz

<7> [400.499065] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [400.499218] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [400.499370] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [400.499517] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [400.499663] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [400.499836] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [400.500016] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [400.500182] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0

<7> [400.500397] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no

<7> [400.500680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [setup_hw_state]

<7> [400.500854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [400.501037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state]

<7> [400.501203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state]

<7> [400.501356] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling

<7> [400.502565] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K)

<7> [400.504850] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K)

<7> [400.505025] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [0, fee00000]

<7> [400.505185] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [400.505326] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0

<7> [400.505471] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0

<7> [400.505607] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0

<7> [400.505790] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [400.508231] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0

<7> [400.508394] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0

<7> [400.508541] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0

<7> [400.509418] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0

<7> [400.509572] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0

<7> [400.509965] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0

<7> [400.510115] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0

<7> [400.511095] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [400.511270] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs.

<7> [400.511437] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [400.533905] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f

<7> [400.534095] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800

<7> [400.534243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [400.534385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [400.534526] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4

<7> [400.534665] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008

<7> [400.534845] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [400.534982] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [400.535118] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [400.535252] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [400.535385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [400.535521] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [400.535656] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [400.535823] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<6> [400.536846] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0

<7> [400.548806] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 750MHz -> 1800MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0

<7> [400.549896] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [400.552597] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [400.552599] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [400.553056] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [400.553438] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000

<7> [400.554273] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x00D05000

<7> [400.562199] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0

<7> [400.562373] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global

<7> [400.563320] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0

<7> [400.563482] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0

<7> [400.564277] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2

<7> [400.564433] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2

<7> [400.565054] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0

<7> [400.565201] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0

<7> [400.566273] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6

<7> [400.566430] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6

<7> [400.568190] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [400.568375] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs.

<7> [400.568541] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset

<7> [400.589559] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0604f

<7> [400.589752] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000

<7> [400.589908] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4

<7> [400.590053] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3

<7> [400.590193] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220e

<7> [400.590331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008

<7> [400.590468] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0

<7> [400.590604] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0

<7> [400.590748] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0

<7> [400.590892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0

<7> [400.591030] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0

<7> [400.591168] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0

<7> [400.591305] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0

<7> [400.591440] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0

<7> [400.591577] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no

<7> [400.595707] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound

<6> [400.595906] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915])

<6> [400.596483] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0

<6> [400.596485] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4

<7> [400.609796] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 11ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0

<7> [400.610067] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled

<7> [400.618805] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0

<6> [400.618987] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media

<6> [400.619901] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled

<6> [400.619902] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled

<6> [400.620098] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled

<7> [400.620294] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000

<7> [400.621318] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000

<7> [400.627272] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [400.627490] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [400.627689] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [400.627907] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1

<7> [400.628094] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [400.628294] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0

<7> [400.628504] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0

<6> [400.630303] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized

<7> [400.631872] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008

<7> [400.632038] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108

<7> [400.632192] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208

<7> [400.632343] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308

<7> [400.632490] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8

<7> [400.632637] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [400.632792] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [400.632936] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [400.633080] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [400.633223] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [400.633369] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008

<7> [400.633518] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108

<7> [400.633659] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208

<7> [400.633811] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308

<7> [400.633953] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8

<7> [400.634094] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008

<7> [400.634237] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108

<7> [400.634377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208

<7> [400.634519] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308

<7> [400.634660] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8

<7> [400.634943] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 0 qgv_peak_bw: 51200

<7> [400.635100] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [400.635249] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 0 qgv_peak_bw: 51200

<7> [400.635394] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 0 qgv_peak_bw: 51200

<7> [400.635535] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 0

<7> [400.635709] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: no [fastset]

<7> [400.635878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset]

<7> [400.636024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset]

<7> [400.636172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset]

<7> [400.636463] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000010 0xad00071)

<7> [400.636813] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [400.637217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B]

<7> [400.637531] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C]

<7> [400.637854] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D]

<7> [400.641104] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs

<7> [400.641965] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered

<7> [400.642133] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [400.642456] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [400.643976] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event

<7> [400.644022] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs

<7> [400.644430] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [400.645262] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event

<7> [400.645302] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs

<7> [400.645540] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event

<7> [400.645571] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs

<7> [400.645950] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2

<7> [400.646613] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event

<7> [400.646648] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:DP-3] adding connector to sysfs

<7> [400.647012] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3

<7> [400.647672] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:DP-3] generating connector hotplug event

<7> [400.647705] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:552:DP-4] adding connector to sysfs

<7> [400.648071] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-4

<7> [400.648620] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:552:DP-4] generating connector hotplug event

<7> [400.648653] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:561:DP-5] adding connector to sysfs

<7> [400.648999] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-5

<7> [400.649772] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:561:DP-5] generating connector hotplug event

<6> [400.649803] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [400.652140] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected

<6> [400.662655] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [400.665199] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15

<7> [400.665735] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [400.665941] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=432

<7> [400.667048] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] not active, skipping

<7> [400.667211] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping

<7> [400.667361] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping

<7> [400.667512] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping

<7> [400.667660] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [400.668643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]

<7> [400.668916] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [400.671352] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [400.672991] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [400.673183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]

<7> [400.677450] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [400.677607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]

<7> [400.678266] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> dp-alt) pin assignment: C max lanes: 4

<7> [400.678730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1

<7> [400.701196] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.723590] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.745483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<6> [400.769438] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1)

<7> [400.769866] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.789964] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1100MHz -> 1100MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0

<6> [400.790199] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads

<7> [400.791706] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.813522] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.835220] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.856966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.878761] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.900559] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.922350] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.944163] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.965913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [400.987666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.009416] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.031168] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.052913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.074660] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.096424] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.118200] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.139913] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.161664] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.183452] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.205173] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.226955] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.230806] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized

<7> [401.248713] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.270558] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.292334] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.314108] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.335873] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.357653] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.379472] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.379675] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110

<7> [401.379715] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [401.379957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]

<7> [401.380251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1

<7> [401.380822] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [401.381087] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [401.381309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]

<7> [401.381648] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [401.381940] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:552:DP-4] status updated from unknown to disconnected (epoch counter 0->1)

<7> [401.382104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]

<7> [401.382389] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [401.382615] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:561:DP-5] status updated from unknown to disconnected (epoch counter 0->1)

<7> [401.382788] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [401.382802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]

<7> [401.382811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]

<7> [401.383694] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [401.384264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [401.384422] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [401.384593] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [401.384767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [401.384773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor

<7> [401.384775] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0

<7> [401.384797] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no

<7> [401.384939] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [401.385074] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [401.386194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected

<7> [401.386269] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:

<7> [401.386273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [401.386277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]

<7> [401.386281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]

<7> [401.386525] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [401.390523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected

<7> [401.390528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]

<7> [401.390533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]

<7> [401.394750] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected

<7> [401.394755] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [401.394758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]

<7> [401.395333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1

<7> [401.418175] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.440089] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.461874] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.483625] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.505412] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.527192] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.548976] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.570756] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.592511] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.614354] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.636134] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.657893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.679640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.701429] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.723207] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.744963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.766742] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.788528] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.810313] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.832065] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.853843] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.875631] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.897420] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.919160] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.940910] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.962658] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [401.984443] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.006227] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.027980] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.049731] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.071514] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.093291] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.093491] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110

<7> [402.093514] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [402.093520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [402.093525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]

<7> [402.093905] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [402.093909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]

<7> [402.093914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]

<7> [402.094301] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected

<7> [402.094306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]

<7> [402.094309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]

<7> [402.094573] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected

<7> [402.094576] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes

<7> [402.094580] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no

<7> [402.094583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no

<7> [402.094585] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [402.094587] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [402.094589] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no

<7> [402.094590] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no

<7> [402.094623] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [402.094638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800

<7> [402.094641] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [402.094650] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)

<7> [402.094726] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [402.094749] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [402.101343] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x01d37000

<6> [402.102210] fbcon: i915drmfb (fb0) is primary device

<7> [402.102843] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [402.103019] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [402.103175] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000

<7> [402.103333] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [402.103492] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A]

<7> [402.103638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [402.103806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [402.103957] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [402.104105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [402.104249] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 7483046/8388608 link 498869/524288)

<7> [402.104392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [402.104548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [402.104695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [402.104861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [402.105002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [402.105146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [402.105289] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [402.105428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [402.105571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [402.105718] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1801)

<7> [402.105863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [402.106006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [402.106150] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1878)

<7> [402.106290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1878)

<7> [402.106429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [402.106568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [402.106707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [402.106860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [402.107014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [402.107157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [402.107303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [402.107452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1801)

<7> [402.107593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [402.107739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [402.107885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1878)

<7> [402.108027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1878)

<7> [402.108168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [402.108308] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [402.108448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [402.108592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [402.108739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state

<7> [402.108881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [402.109028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [402.109170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c20pll_hw_state:

<7> [402.109313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [402.109454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [402.109596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[0] = 0x0000

<7> [402.109743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[1] = 0x0000

<7> [402.109887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[2] = 0x0000

<7> [402.110035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[3] = 0x0000

<7> [402.110177] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[4] = 0x0000

<7> [402.110316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[5] = 0x0000

<7> [402.110458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[6] = 0x0000

<7> [402.110601] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[7] = 0x0000

<7> [402.110768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[8] = 0x0000

<7> [402.110912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mplla[9] = 0x0000

<7> [402.111059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] mpllb[10] = 0x0000

<7> [402.111200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [402.111340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [402.111481] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [402.111624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes,

<7> [402.111775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1,

<7> [402.111916] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0.

<7> [402.112059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state:

<7> [402.112197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21

<7> [402.112336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0

<7> [402.112479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [402.112620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [402.112771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0

<7> [402.112921] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23

<7> [402.113085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [402.113237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 513820)

<7> [402.113385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 513820)

<7> [402.113528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [402.113671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)

<7> [402.113822] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [402.114013] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [402.114165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [402.114315] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001

<7> [402.114463] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95

<7> [402.114608] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [402.114760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0

<7> [402.114898] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87

<7> [402.115036] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88

<7> [402.115187] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:150:pipe A] data rate 2055280 num active planes 1

<7> [402.115342] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 23783 required 2159 qgv_peak_bw: 51200

<7> [402.115491] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [402.115637] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 27215 required 2159 qgv_peak_bw: 51200

<7> [402.115791] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 28357 required 2159 qgv_peak_bw: 51200

<7> [402.115942] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159

<7> [402.116106] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 256910 kHz

<7> [402.116274] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 32114 kHz

<7> [402.116418] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Can change cdclk via squashing

<7> [402.116560] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [402.116702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [402.116872] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0

<7> [402.117030] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0

<7> [402.117182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [402.117332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [402.117480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [402.117627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [402.117781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [402.117925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [402.118066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [402.118207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64

<7> [402.118347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [402.118489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [402.118632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [402.118823] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [402.118967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [402.119108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [402.119251] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14

<7> [402.119395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [402.119537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [402.119676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [402.119832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [402.119985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [402.120130] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [402.120271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1

<7> [402.120413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69

<7> [402.120556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878

<7> [402.120696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [402.120859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [402.121006] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [402.121147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa

<7> [402.121287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa

<7> [402.121431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa

<7> [402.121573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910

<7> [402.121721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0

<7> [402.121862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [402.122013] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [402.122162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [402.122309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [402.122451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes,

<7> [402.122591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1,

<7> [402.122745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0.

<7> [402.122890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state:

<7> [402.123033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21

<7> [402.123174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0

<7> [402.123314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [402.123454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [402.123592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0

<7> [402.123739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23

<7> [402.123882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [402.124026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [402.124168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [402.124312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.124452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.124593] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.124740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [402.124879] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [402.125027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.125171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.125314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [402.125455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [402.125595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [402.125740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:508] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [402.125884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [402.126033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [402.126178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [402.126320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [402.126460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [402.126600] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [402.126749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [402.127323] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72)

<7> [402.127654] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [402.127988] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768

<7> [402.128142] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A]

<7> [402.128295] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B]

<7> [402.128443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A]

<7> [402.128591] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B]

<7> [402.128745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C]

<7> [402.128888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D]

<7> [402.129029] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1]

<7> [402.129169] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A]

<7> [402.129307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B]

<7> [402.129445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C]

<7> [402.129586] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D]

<7> [402.129734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2]

<7> [402.129874] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:544:DP-MST A]

<7> [402.130014] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DP-MST B]

<7> [402.130153] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DP-MST C]

<7> [402.130292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST D]

<7> [402.130428] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DDI TC3/PHY TC3]

<7> [402.130565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:553:DP-MST A]

<7> [402.130703] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DP-MST B]

<7> [402.130856] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DP-MST C]

<7> [402.130995] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST D]

<7> [402.131138] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DDI TC4/PHY TC4]

<7> [402.131276] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:562:DP-MST A]

<7> [402.131413] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:563:DP-MST B]

<7> [402.131551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:564:DP-MST C]

<7> [402.131687] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:565:DP-MST D]

<7> [402.131867] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf

<7> [402.132177] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: *)

<7> [402.132332] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [402.132590] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [402.132755] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [402.134819] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on

<7> [402.135051] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [402.135304] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [402.144782] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [402.145044] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on

<7> [402.145288] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [402.194848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1

<7> [402.346075] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [402.350207] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80

<7> [402.351507] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [402.352191] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07

<7> [402.353443] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [402.354327] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [402.355345] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK

<7> [402.355525] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [402.356914] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [402.357059] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [402.357701] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [402.358147] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [402.358320] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [402.358558] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 4518

<7> [402.369882] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2

<7> [402.372429] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1]

<7> [402.372993] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A]

<7> [402.375000] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [402.376781] Console: switching to colour frame buffer device 180x56

<6> [402.392954] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [402.392960] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14

<7> [402.393126] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0

<7> [402.393276] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [402.393423] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes

<7> [402.393578] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes

<7> [402.393731] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [402.393882] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [402.394031] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes

<7> [402.394178] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [402.394322] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [402.394465] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [402.394612] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [402.394764] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [402.394910] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [402.395055] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [402.395199] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no

<7> [402.395340] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [402.395482] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [402.395624] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [402.395775] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [402.395917] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes

<7> [402.396061] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz

<7> [402.396571] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [402.396752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D

<7> [402.396959] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000)

<7> [402.397221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C

<7> [402.397380] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [402.397570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B

<7> [402.397737] i915 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [i915]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [402.397926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [402.398155] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12

<7> [402.398290] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71

<7> [402.398422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13

<7> [402.398549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0

<7> [402.398671] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0

<7> [402.398807] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0

<7> [402.398928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41

<7> [402.399048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000

<7> [402.399164] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE

<7> [402.399280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [402.399397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [402.399514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46

<7> [402.399630] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [402.399759] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [402.399873] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [402.399989] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [402.400109] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [402.400227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [402.400344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [402.400459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [402.400574] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [402.400689] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes

<7> [402.400820] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes

<7> [402.400935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [402.401049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [402.401162] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [402.401276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes

<7> [402.401391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes

<7> [402.401514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [402.401628] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [402.401751] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no

<7> [402.401864] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [402.401979] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes

<7> [402.402094] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [402.402208] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [402.402322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes

<7> [402.402435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes

<7> [402.402553] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes

<7> [402.402672] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [402.402817] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes

<7> [402.402930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [402.403043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [402.403156] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [402.403271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [402.403385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes

<7> [402.403498] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no

<7> [402.403611] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [402.403741] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [402.403856] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [402.403970] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [402.404083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [402.404196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003

<7> [402.404311] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8

<7> [402.404433] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff

<7> [402.404547] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff

<7> [402.404659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128

<7> [402.404784] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16

<7> [402.404898] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [402.405012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [402.405126] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no

<7> [402.405239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400

<7> [402.405351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8

<7> [402.405465] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00

<7> [402.405580] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00

<7> [402.405694] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128

<7> [402.405822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16

<7> [402.405935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [402.406047] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [402.406161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no

<6> [402.406274] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [402.406275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [402.406275] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [402.424904] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [402.424917] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [402.425160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]

<7> [402.425171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]

<7> [402.425961] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [402.426444] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [402.426588] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [402.426725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [402.426930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [402.426934] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor

<7> [402.426939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0

<7> [402.426959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no

<7> [402.427090] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [402.427218] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [402.428048] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:

<7> [402.428055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [402.428059] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]

<7> [402.428062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]

<7> [402.432302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected

<7> [402.432307] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]

<7> [402.432310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]

<7> [402.436537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected

<7> [402.436541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [402.436543] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]

<7> [402.437150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_TC1

<7> [402.460040] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.481922] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.503673] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.525388] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.547109] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.568839] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.590552] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.612294] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.634044] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.655766] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.677480] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.699205] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.720922] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.742666] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.764449] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.786200] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.807917] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.829668] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.851452] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.873202] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.894920] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.916643] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.938421] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.960171] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [402.981893] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.003609] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.025392] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.047141] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.068859] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.090609] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.112392] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.134150] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.134330] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110

<7> [403.134361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [403.134366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [403.134370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]

<7> [403.134749] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [403.134754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]

<7> [403.134758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]

<7> [403.135110] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected

<7> [403.135114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]

<7> [403.135118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]

<7> [403.135426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected

<7> [403.135429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes

<7> [403.135432] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no

<7> [403.135434] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no

<7> [403.135436] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [403.135437] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [403.135439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no

<7> [403.135441] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no

<7> [403.135537] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [403.135555] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800

<7> [403.135558] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [403.135578] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)

<7> [403.147975] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [403.147997] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [403.148001] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [403.148038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]

<7> [403.148042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1]

<7> [403.148732] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [403.149263] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [403.149392] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000

<7> [403.149543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000

<7> [403.149721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [403.149725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor

<7> [403.149727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0

<7> [403.149740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no

<7> [403.149879] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [403.150009] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [403.150965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:

<7> [403.150970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa

<7> [403.150974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1]

<7> [403.150977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1]

<7> [403.155206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected

<7> [403.155210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1]

<7> [403.155212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1]

<7> [403.159451] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected

<7> [403.159455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2]

<7> [403.159457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2]

<7> [403.181389] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.203140] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.224891] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.246641] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.268590] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.290372] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.312100] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.333841] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.355591] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.377342] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.399067] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.420810] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.442561] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.464311] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.486062] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.507812] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.529563] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.551315] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.573064] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.594787] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.616532] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.638283] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.660000] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.681719] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.703440] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.725193] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.746937] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.768701] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.790438] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.812188] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.833909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.855659] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX USBC1/DDI TC1/PHY TC1: timeout (status 0x7d4c023f)

<7> [403.855901] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC1/DDI TC1/PHY TC1: Too many retries, giving up. First error: -110

<7> [403.855920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected

<7> [403.855926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3]

<7> [403.855929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:543:DP-3]

<7> [403.856284] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:DP-3] disconnected

<7> [403.856289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4]

<7> [403.856293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:552:DP-4]

<7> [403.856597] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:552:DP-4] disconnected

<7> [403.856601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5]

<7> [403.856604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:561:DP-5]

<7> [403.856965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:561:DP-5] disconnected

<7> [403.856968] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes

<7> [403.856971] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no

<7> [403.856973] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no

<7> [403.856975] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no

<7> [403.856977] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:DP-3] enabled? no

<7> [403.856980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:552:DP-4] enabled? no

<7> [403.856982] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:561:DP-5] enabled? no

<7> [403.857003] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [403.857012] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800

<7> [403.857015] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [403.857025] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0)

<7> [403.869188] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [403.877996] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [403.878260] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [403.878809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [403.879157] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [403.879703] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [403.902749] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [403.913536] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [403.913709] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [403.918718] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [403.918879] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [403.919026] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [403.919168] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A

<7> [403.919305] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [403.919436] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [403.919568] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [403.919709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [403.919844] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [403.919978] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [403.920117] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [403.920251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [403.920380] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [403.920507] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [403.920639] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [403.920776] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [403.920906] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [403.921035] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [403.921167] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [403.921298] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E

<7> [403.921427] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [403.921558] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [403.921695] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [403.921827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F

<7> [403.921961] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [403.922093] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [403.922224] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [403.922355] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G

<7> [403.922486] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [403.922616] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [403.922761] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [403.922895] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H

<7> [403.923029] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [403.923163] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [403.923293] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [403.923426] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I

<7> [403.926671] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509

<6> [403.930710] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16

<6> [403.933404] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17

<6> [403.934541] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18

<6> [403.935420] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19

<7> [403.962730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_TC1

<7> [403.969399] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [403.969834] [IGT] i915_module_load: finished subtest reload, SUCCESS

<6> [403.970348] [IGT] i915_module_load: exiting, ret=0

Results for igt@i915_module_load@reload