<5>[ 0.000000] Linux version 6.19.0-rc7-CI_DRM_17909-g344db0fba389+ (kbuild@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Jan 30 02:16:52 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd87018 ESRT=0x5ae00c18 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem289: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem291: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000602] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000604] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005016] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40. <7>[ 0.005026] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved <6>[ 0.005053] Using GB pages for direct mapping <6>[ 0.005840] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005843] printk: early log buf free: 258744(98%) <6>[ 0.005845] Secure boot disabled <6>[ 0.005847] ACPI: Early table checksum verification disabled <6>[ 0.005852] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005856] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005862] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005866] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005868] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005869] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005871] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005873] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005875] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005877] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005879] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005881] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005883] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005885] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005887] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005889] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005891] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005895] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005896] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005898] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005900] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005903] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005905] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005907] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005909] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005911] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005913] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005915] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005917] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005919] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005921] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005923] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005925] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005927] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005929] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005931] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005932] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005934] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005936] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005938] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005939] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005942] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005944] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005946] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005948] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005950] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005952] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005953] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005955] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005955] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.005956] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005956] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005957] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005957] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005958] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005958] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005959] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005959] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005960] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005960] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005960] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005961] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005961] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005962] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005962] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005963] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005963] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005964] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005964] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005964] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005965] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005965] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005966] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005966] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005967] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005968] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005968] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005969] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005969] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005970] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005970] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005971] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005971] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005972] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005973] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005973] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005974] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005974] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005975] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005975] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005976] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005977] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005977] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006074] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006282] No NUMA configuration found <6>[ 0.006283] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006291] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006463] Zone ranges: <6>[ 0.006464] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006465] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006466] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006467] Device empty <6>[ 0.006468] Movable zone start for each node <6>[ 0.006469] Early memory node ranges <6>[ 0.006469] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006470] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006470] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006471] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006472] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006478] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006515] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008687] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050631] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.051106] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.051112] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.051113] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.051117] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051162] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051166] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051169] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051170] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051184] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved <6>[ 0.051192] TSC deadline timer available <6>[ 0.051194] CPU topo: Max. logical packages: 1 <6>[ 0.051195] CPU topo: Max. logical dies: 1 <6>[ 0.051195] CPU topo: Max. dies per package: 1 <6>[ 0.051197] CPU topo: Max. threads per core: 2 <6>[ 0.051198] CPU topo: Num. cores per package: 16 <6>[ 0.051199] CPU topo: Num. threads per package: 22 <6>[ 0.051199] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051218] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051220] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051221] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff] <6>[ 0.051223] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff] <6>[ 0.051225] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051226] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051229] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051230] Booting paravirtualized kernel on bare hardware <6>[ 0.051233] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051246] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052747] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.052753] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052754] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052757] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052760] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052785] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052906] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052930] random: crng init done <6>[ 0.055730] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.057123] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057258] software IO TLB: area num 32. <6>[ 0.068623] Fallback order for Node 0: 0 <6>[ 0.068627] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.068628] Policy zone: Normal <6>[ 0.068643] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068644] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068647] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070094] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112798] ********************************************************** <4>[ 0.112799] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112799] ** ** <4>[ 0.112799] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112800] ** via the console, logs, and other interfaces. This ** <4>[ 0.112800] ** might reduce the security of your system. ** <4>[ 0.112800] ** ** <4>[ 0.112800] ** If you see this message and you are not debugging ** <4>[ 0.112801] ** the kernel, report this immediately to your system ** <4>[ 0.112801] ** administrator! ** <4>[ 0.112801] ** ** <4>[ 0.112801] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112801] ** ** <4>[ 0.112802] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112802] ********************************************************** <6>[ 0.114432] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.125100] ftrace: allocating 61101 entries in 240 pages <6>[ 0.125102] ftrace: allocated 240 pages with 4 groups <6>[ 0.126906] Dynamic Preempt: voluntary <6>[ 0.128028] Running RCU self tests <6>[ 0.128029] Running RCU synchronous self tests <6>[ 0.128029] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.128030] rcu: RCU lockdep checking is enabled. <6>[ 0.128030] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.128031] Trampoline variant of Tasks RCU enabled. <6>[ 0.128032] Rude variant of Tasks RCU enabled. <6>[ 0.128032] Tracing variant of Tasks RCU enabled. <6>[ 0.128032] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.128033] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.128165] Running RCU synchronous self tests <6>[ 0.128179] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128184] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.128187] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.141021] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.141594] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.142223] Console: colour dummy device 80x25 <6>[ 0.142233] printk: legacy console [tty0] enabled <6>[ 0.143441] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.143449] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.143453] ... MAX_LOCK_DEPTH: 48 <6>[ 0.143456] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.143460] ... CLASSHASH_SIZE: 4096 <6>[ 0.143464] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.143468] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.143472] ... CHAINHASH_SIZE: 262144 <6>[ 0.143476] memory used by lock dependency info: 54145 kB <6>[ 0.143480] memory used for stack traces: 4224 kB <6>[ 0.143484] per task-struct memory footprint: 1920 bytes <6>[ 0.143553] ACPI: Core revision 20250807 <6>[ 0.144704] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.144763] APIC: Switch to symmetric I/O mode setup <6>[ 0.144770] DMAR: Host address width 42 <6>[ 0.144775] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.144813] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.144824] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.144845] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.144854] DMAR: SATC flags: 0x1 <6>[ 0.144864] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.144870] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.144876] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.146578] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.150979] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.151002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.151070] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.151078] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.151286] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.151292] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.151302] process: using mwait in idle threads <6>[ 0.151310] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.151327] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.151337] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.151344] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.151350] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.151361] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.151380] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.151389] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.151394] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.151400] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.151408] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.151415] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.151423] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.151430] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.151436] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.151444] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.151450] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.151995] Freeing SMP alternatives memory: 56K <6>[ 0.151995] pid_max: default: 32768 minimum: 301 <6>[ 0.151995] landlock: Up and running. <6>[ 0.151995] Yama: becoming mindful. <6>[ 0.151995] AppArmor: AppArmor initialized <6>[ 0.151995] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.151995] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.151995] Running RCU synchronous self tests <6>[ 0.151995] Running RCU synchronous self tests <6>[ 0.151995] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.151995] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.152217] core: cpu_core PMU driver: <6>[ 0.152227] ... version: 5 <6>[ 0.152231] ... bit width: 48 <6>[ 0.152235] ... generic counters: 8 <6>[ 0.152239] ... generic bitmap: 00000000000000ff <6>[ 0.152244] ... fixed-purpose counters: 4 <6>[ 0.152248] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.152252] ... value mask: 0000ffffffffffff <6>[ 0.152257] ... max period: 00007fffffffffff <6>[ 0.152262] ... global_ctrl mask: 0001000f000000ff <6>[ 0.152450] signal: max sigframe size: 3632 <6>[ 0.152484] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 0.152637] rcu: Hierarchical SRCU implementation. <6>[ 0.152642] rcu: Max phase no-delay instances is 400. <6>[ 0.152810] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.155515] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.156290] smp: Bringing up secondary CPUs ... <6>[ 0.156709] smpboot: x86: Booting SMP configuration: <6>[ 0.156717] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010272] core: cpu_atom PMU driver: <6>[ 0.010272] ... version: 5 <6>[ 0.010272] ... bit width: 48 <6>[ 0.010272] ... generic counters: 8 <6>[ 0.010272] ... generic bitmap: 00000000000000ff <6>[ 0.010272] ... fixed-purpose counters: 3 <6>[ 0.010272] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010272] ... value mask: 0000ffffffffffff <6>[ 0.010272] ... max period: 00007fffffffffff <6>[ 0.010272] ... global_ctrl mask: 00000007000000ff <5>[ 0.171017] #2 #4 #5 #7 #9 #11 <6>[ 0.177088] smp: Brought up 1 node, 22 CPUs <6>[ 0.177088] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.180157] Memory: 32228920K/33040248K available (25578K kernel code, 5617K rwdata, 9656K rodata, 5720K init, 68168K bss, 780060K reserved, 0K cma-reserved) <6>[ 0.184247] devtmpfs: initialized <6>[ 0.184366] x86/mm: Memory block size: 128MB <6>[ 0.209228] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.210128] Running RCU synchronous self tests <6>[ 0.210145] Running RCU synchronous self tests <6>[ 0.210162] Running RCU Tasks wait API self tests <6>[ 0.210162] Running RCU Tasks Rude wait API self tests <6>[ 0.210162] Running RCU Tasks Trace wait API self tests <6>[ 0.223025] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.223240] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.223526] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.224827] PM: RTC time: 09:16:34, date: 2026-01-30 <6>[ 0.225702] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.227003] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.227416] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.227835] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.227896] audit: initializing netlink subsys (disabled) <5>[ 0.227938] audit: type=2000 audit(1769764594.077:1): state=initialized audit_enabled=0 res=1 <6>[ 0.228815] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.228816] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.228822] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.228827] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.228832] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.228869] cpuidle: using governor ladder <6>[ 0.228869] cpuidle: using governor menu <6>[ 0.229364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.230320] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.230377] PCI: Using configuration type 1 for base access <6>[ 0.230621] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.232211] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.232211] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.232211] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.232211] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.237133] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.237148] raid6: using avx2x2 recovery algorithm <6>[ 0.238135] fbcon: Taking over console <6>[ 0.238406] ACPI: Added _OSI(Module Device) <6>[ 0.238415] ACPI: Added _OSI(Processor Device) <6>[ 0.238423] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.242008] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.978689] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.998493] ACPI: EC: EC started <6>[ 0.998509] ACPI: EC: interrupt blocked <6>[ 1.003839] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 1.003850] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.074254] Callback from call_rcu_tasks() invoked. <6>[ 1.312189] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.312205] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.405616] ACPI: Interpreter enabled <6>[ 1.405821] ACPI: PM: (supports S0 S4 S5) <6>[ 1.405830] ACPI: Using IOAPIC for interrupt routing <6>[ 1.416260] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.416277] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.467853] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.467892] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.570438] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.939218] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.972997] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.980263] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.994180] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 2.000035] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 2.006867] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 2.013890] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.217500] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.217899] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.218223] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.353627] ACPI: \_TZ_.FN00: New power resource <6>[ 2.354211] ACPI: \_TZ_.FN01: New power resource <6>[ 2.354774] ACPI: \_TZ_.FN02: New power resource <6>[ 2.355365] ACPI: \_TZ_.FN03: New power resource <6>[ 2.355961] ACPI: \_TZ_.FN04: New power resource <6>[ 2.359341] ACPI: \PIN_: New power resource <6>[ 2.362515] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.362533] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.364910] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.369625] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.382332] PCI host bridge to bus 0000:00 <6>[ 2.382367] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.382374] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.382381] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.382388] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.382396] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.382404] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.391788] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.392438] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.392472] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.392480] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.392513] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.392521] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.392566] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.392624] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.392629] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.394143] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.394201] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.396689] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.396729] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.396748] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.398517] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.398559] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.398575] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.398727] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.398828] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.408596] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.408638] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.408653] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.408674] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.408790] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.408874] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.418017] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.418058] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.418073] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.418094] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.418208] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.418293] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.427133] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.427192] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.428000] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.428039] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.428058] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.428456] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.428497] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.428512] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.429757] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.429843] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.429957] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.433556] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.433651] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.433665] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.433733] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.433741] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.436419] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.437021] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.437021] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.441976] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.442028] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.442101] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.446268] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.446328] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.446342] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.446827] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.446917] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.459447] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.460001] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.472367] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.472432] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.485340] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.485408] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.498407] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.498472] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.498551] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.503500] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.503553] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.503564] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.503971] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.504040] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.514777] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.514842] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.527388] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.529940] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.530109] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.530131] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.530283] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.531130] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.531191] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.531209] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.533516] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.533631] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.534192] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.534282] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.534380] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.537321] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.537487] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.539822] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.540131] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.540434] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.949353] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.949364] Low-power S0 idle used by default for system suspend <6>[ 3.037464] ACPI: EC: interrupt unblocked <6>[ 3.037481] ACPI: EC: event unblocked <6>[ 3.037998] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.037998] ACPI: EC: GPE=0x6e <6>[ 3.037998] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 3.037998] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 3.039331] iommu: Default domain type: Translated <6>[ 3.039331] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 3.043461] SCSI subsystem initialized <7>[ 3.044360] libata version 3.00 loaded. <6>[ 3.044531] ACPI: bus type USB registered <6>[ 3.044665] usbcore: registered new interface driver usbfs <6>[ 3.044723] usbcore: registered new interface driver hub <6>[ 3.044797] usbcore: registered new device driver usb <6>[ 3.044972] pps_core: LinuxPPS API ver. 1 registered <6>[ 3.044976] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 3.045001] PTP clock support registered <6>[ 3.045134] EDAC MC: Ver: 3.0.0 <6>[ 3.046339] efivars: Registered efivars operations <6>[ 3.048142] NetLabel: Initializing <6>[ 3.048148] NetLabel: domain hash size = 128 <6>[ 3.048152] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 3.048236] NetLabel: unlabeled traffic allowed by default <6>[ 3.048253] mctp: management component transport protocol core <6>[ 3.048258] NET: Registered PF_MCTP protocol family <6>[ 3.048317] PCI: Using ACPI for IRQ routing <7>[ 3.060416] PCI: pci_cache_line_size set to 64 bytes <6>[ 3.060600] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 3.060782] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 3.060792] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff] <7>[ 3.060795] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff] <7>[ 3.060797] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 3.061175] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 3.061175] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 3.061175] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 3.061175] vgaarb: loaded <6>[ 3.070286] clocksource: Switched to clocksource tsc-early <5>[ 3.078400] VFS: Disk quotas dquot_6.6.0 <6>[ 3.078430] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 3.079707] AppArmor: AppArmor Filesystem Enabled <6>[ 3.079913] pnp: PnP ACPI init <6>[ 3.080935] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 3.080947] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 3.081578] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 3.083081] system 00:03: [io 0x06a4] has been reserved <6>[ 3.083091] system 00:03: [io 0x06a0] has been reserved <4>[ 3.104509] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 3.104521] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.104711] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 3.104725] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 3.104741] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 3.104757] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 3.104772] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 3.104784] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 3.110860] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 3.112049] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 3.114838] pnp: PnP ACPI: found 8 devices <6>[ 3.127712] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 3.127958] NET: Registered PF_INET protocol family <6>[ 3.128202] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.130960] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 3.131197] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 3.131485] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 3.132782] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 3.134258] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 3.135040] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.136095] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 3.137283] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 3.137368] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 3.137426] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 3.137446] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 3.137458] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 3.137470] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 3.137493] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 3.137515] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 3.137541] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 3.137563] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 3.137585] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 3.137607] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 3.137642] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 3.137656] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 3.137676] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 3.137700] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 3.137713] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 3.137725] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.137747] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 3.137757] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 3.137769] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 3.137782] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.137799] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 3.137809] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 3.137818] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 3.137829] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 3.137840] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.137852] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 3.137862] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 3.137871] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 3.137880] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 3.137893] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 3.137902] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 3.137911] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 3.139806] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 3.142893] PCI: CLS 0 bytes, default 64 <6>[ 3.143044] DMAR: No RMRR found <6>[ 3.143060] DMAR: No ATSR found <6>[ 3.143067] DMAR: dmar0: Using Queued invalidation <6>[ 3.143078] DMAR: dmar1: Using Queued invalidation <6>[ 3.144354] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 3.146310] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 3.146412] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 3.146508] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 3.146633] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 3.146763] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 3.146894] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 3.146984] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 3.147079] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 3.147174] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 3.147296] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 3.147373] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 3.147478] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 3.147596] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 3.147670] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 3.147812] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 3.147886] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 3.147965] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 3.148034] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 3.148149] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 3.148226] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 3.148344] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 3.148419] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 3.148570] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 3.148646] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 3.148721] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 3.148797] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 3.148868] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 3.148982] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 3.172837] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 3.172851] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 3.172861] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB) <6>[ 3.176488] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 3.176859] clocksource: Switched to clocksource tsc <6>[ 3.177048] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 3.187930] Initialise system trusted keyrings <5>[ 3.188032] Key type blacklist registered <6>[ 3.188508] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 3.200831] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 3.200973] ntfs3: Enabled Linux POSIX ACLs support <6>[ 3.200982] ntfs3: Read-only LZX/Xpress compression included <5>[ 3.202786] integrity: Platform Keyring initialized <5>[ 3.202819] integrity: Machine keyring initialized <6>[ 3.210688] xor: automatically using best checksumming function avx <5>[ 3.210702] Key type asymmetric registered <5>[ 3.210717] Asymmetric key parser 'x509' registered <6>[ 3.210865] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.211299] io scheduler mq-deadline registered <6>[ 3.214917] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.217436] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 3.219650] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 3.221675] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 3.224121] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 3.224571] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.225062] ACPI: button: Lid Switch [LID0] <6>[ 3.225437] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.225678] ACPI: button: Sleep Button [SLPB] <6>[ 3.225980] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.226223] ACPI: button: Power Button [PWRB] <6>[ 3.333983] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.333998] ACPI: thermal: Thermal Zone [TZ00] (38 C) <6>[ 3.335753] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.336055] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.337803] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.358975] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.379664] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 3.382821] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 3.406223] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 3.408415] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.408543] Linux agpgart interface v0.103 <6>[ 3.436770] ACPI: bus type drm_connector registered <7>[ 3.438371] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.469358] loop: module loaded <6>[ 3.509928] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.608447] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.705234] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.801428] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 3.884034] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 3.983796] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 4.105253] Key type psk registered <6>[ 4.107893] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 4.108685] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.108845] nvme nvme0: pci function 0000:01:00.0 <6>[ 4.109571] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.109681] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 4.111442] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.112918] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 4.112936] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 4.112952] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.113236] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.113250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.113257] usb usb1: Product: xHCI Host Controller <6>[ 4.113262] usb usb1: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17909-g344db0fba389+ xhci-hcd <6>[ 4.113268] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 4.114116] hub 1-0:1.0: USB hub found <6>[ 4.114197] hub 1-0:1.0: 1 port detected <6>[ 4.118167] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.118176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.118183] usb usb2: Product: xHCI Host Controller <6>[ 4.118187] usb usb2: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17909-g344db0fba389+ xhci-hcd <6>[ 4.118194] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 4.118813] hub 2-0:1.0: USB hub found <6>[ 4.118868] hub 2-0:1.0: 4 ports detected <6>[ 4.139458] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.139481] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 4.141025] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 4.143029] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 4.143043] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 4.143054] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 4.143188] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 4.143196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.143202] usb usb3: Product: xHCI Host Controller <6>[ 4.143207] usb usb3: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17909-g344db0fba389+ xhci-hcd <6>[ 4.143213] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 4.143736] hub 3-0:1.0: USB hub found <6>[ 4.143770] hub 3-0:1.0: 12 ports detected <6>[ 4.168929] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 4.168939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.168945] usb usb4: Product: xHCI Host Controller <6>[ 4.168950] usb usb4: Manufacturer: Linux 6.19.0-rc7-CI_DRM_17909-g344db0fba389+ xhci-hcd <6>[ 4.168956] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 4.169673] hub 4-0:1.0: USB hub found <6>[ 4.169735] hub 4-0:1.0: 2 ports detected <6>[ 4.173390] usbcore: registered new interface driver usb-storage <6>[ 4.173517] usbcore: registered new interface driver usbserial_generic <6>[ 4.173572] usbserial: USB Serial support registered for generic <6>[ 4.173625] usbcore: registered new interface driver ftdi_sio <6>[ 4.173652] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 4.173703] usbcore: registered new interface driver pl2303 <6>[ 4.173729] usbserial: USB Serial support registered for pl2303 <6>[ 4.173825] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 4.173831] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 4.183107] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 4.221934] nvme nvme0: 16/0/0 default/read/poll queues <3>[ 4.874724] i8042: Can't read CTR while initializing i8042 <3>[ 4.874731] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.875399] mousedev: PS/2 mouse device common for all mice <6>[ 4.876616] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.878219] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.878388] rtc_cmos rtc_cmos: setting system clock to 2026-01-30T09:16:38 UTC (1769764598) <6>[ 4.878524] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.878562] i2c_dev: i2c /dev entries driver <6>[ 4.883210] nvme0n1: p1 p2 <6>[ 4.885398] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.885406] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.885413] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.885444] device-mapper: uevent: version 1.0.3 <6>[ 4.885687] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.885699] intel_pstate: Intel P-state driver initializing <6>[ 4.893869] intel_pstate: HWP enabled <6>[ 4.893876] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.893881] sdhci: Copyright(c) Pierre Ossman <6>[ 4.894014] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.897957] drop_monitor: Initializing network drop monitor service <6>[ 4.898259] NET: Registered PF_INET6 protocol family <6>[ 4.900214] Segment Routing with IPv6 <6>[ 4.900271] In-situ OAM (IOAM) with IPv6 <6>[ 4.900357] NET: Registered PF_PACKET protocol family <5>[ 4.900657] Key type dns_resolver registered <4>[ 4.916006] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.918006] microcode: Current revision: 0x0000001c <6>[ 4.920256] IPI shorthand broadcast: enabled <6>[ 4.935549] sched_clock: Marking stable (4926002213, 9272061)->(5007978303, -72704029) <6>[ 4.937631] registered taskstats version 1 <5>[ 4.942332] Loading compiled-in X.509 certificates <6>[ 4.986671] Demotion targets for Node 0: null <6>[ 4.987085] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 4.987094] kmemleak: Automatic memory scanning thread started <5>[ 4.987346] Key type .fscrypt registered <5>[ 4.987351] Key type fscrypt-provisioning registered <6>[ 4.990553] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 4.990670] Key type trusted registered <5>[ 4.995800] Key type encrypted registered <6>[ 4.995830] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 4.995896] Loading compiled-in module X.509 certificates <5>[ 4.997550] Loaded X.509 cert 'Build time autogenerated kernel key: 7fde0b6b114a821d636cbcb36e5a0ae9d05df421' <6>[ 4.997578] ima: Allocated hash algorithm: sha256 <6>[ 5.038027] ima: No architecture policies found <6>[ 5.038346] evm: Initialising EVM extended attributes: <6>[ 5.038361] evm: security.selinux <6>[ 5.038372] evm: security.SMACK64 <6>[ 5.038382] evm: security.SMACK64EXEC <6>[ 5.038392] evm: security.SMACK64TRANSMUTE <6>[ 5.038404] evm: security.SMACK64MMAP <6>[ 5.038414] evm: security.apparmor <6>[ 5.038424] evm: security.ima <6>[ 5.038433] evm: security.capability <6>[ 5.038444] evm: HMAC attrs: 0x1 <6>[ 5.042202] PM: Magic number: 10:895:273 <6>[ 5.042220] usb usb1-port1: hash matches <6>[ 5.042288] tty tty10: hash matches <6>[ 5.042297] net lo: hash matches <6>[ 5.042318] acpi device:7b: hash matches <6>[ 5.042482] netconsole: network logging started <6>[ 5.043060] RAS: Correctable Errors collector initialized. <6>[ 5.043285] clk: Disabling unused clocks <6>[ 5.043300] PM: genpd: Disabling unused power domains <4>[ 5.044511] check access for rdinit=/init failed: -2, ignoring <6>[ 5.044518] md: Waiting for all devices to be available before autodetect <6>[ 5.044523] md: If you don't use raid, use raid=noautodetect <6>[ 5.044527] md: Autodetecting RAID arrays. <6>[ 5.044534] md: autorun ... <6>[ 5.044537] md: ... autorun DONE. <6>[ 5.095586] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 5.109489] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 5.109522] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 5.109537] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 5.109547] usb 4-1: Manufacturer: Realtek <6>[ 5.109556] usb 4-1: SerialNumber: 000001 <6>[ 5.117928] EXT4-fs (nvme0n1p2): mounted filesystem f122a966-f29a-437f-8b15-4f3e9c2e449d ro with ordered data mode. Quota mode: none. <6>[ 5.118000] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 5.118817] devtmpfs: mounted <6>[ 5.136456] Freeing unused decrypted memory: 2036K <6>[ 5.137769] Freeing unused kernel image (initmem) memory: 5720K <6>[ 5.137796] Write protecting the kernel read-only data: 36864k <6>[ 5.139409] Freeing unused kernel image (text/rodata gap) memory: 1044K <6>[ 5.140250] Freeing unused kernel image (rodata/data gap) memory: 584K <6>[ 5.146116] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 5.159380] Run /sbin/init as init process <7>[ 5.159386] with arguments: <7>[ 5.159387] /sbin/init <7>[ 5.159388] with environment: <7>[ 5.159389] HOME=/ <7>[ 5.159389] TERM=linux <7>[ 5.252943] systemd[1]: Inserted module 'autofs4' <7>[ 5.280905] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 5.280936] systemd[1]: Detected architecture x86-64. <7>[ 5.282538] systemd[1]: Hostname set to . <7>[ 5.558245] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.595639] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.597587] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.599192] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.599458] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.600151] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.600288] systemd[1]: Expecting device dev-disk-by\x2duuid-30D0\x2d93C8.device - /dev/disk/by-uuid/30D0-93C8... <7>[ 5.600377] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.600461] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.600534] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.600603] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.600677] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.600921] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.601306] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.601606] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.601947] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.602230] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.602512] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.602829] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.603189] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.603516] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.603718] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.604031] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.604333] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.608118] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.611052] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.613921] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.616605] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.627299] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.630141] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.632994] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.636408] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.638744] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.641114] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.644173] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.646427] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.649625] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.652140] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.653481] systemd-journald[307]: Collecting audit messages is disabled. <7>[ 5.655897] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.657533] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 5.661075] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 5.665516] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.665654] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.665718] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.668835] pstore: Using crash dump compression: deflate <7>[ 5.669599] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 5.672125] pstore: Registered efi_pstore as persistent store backend <6>[ 5.673188] fuse: init (API version 7.45) <7>[ 5.675171] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.807008] EXT4-fs (nvme0n1p2): re-mounted f122a966-f29a-437f-8b15-4f3e9c2e449d r/w. <6>[ 5.844313] Adding 8388604k swap on /swap.img. Priority:-1 extents:53 across:700645376k SS <7>[ 5.862325] systemd-journald[307]: Received client request to flush runtime journal. <7>[ 5.887683] systemd-journald[307]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.887693] systemd-journald[307]: Rotating system journal. <4>[ 6.563572] nvme nvme0: using unchecked data buffer <6>[ 6.673339] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.716107] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.734885] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 6.740596] intel-hid INTC1077:00: platform supports 5 button array <6>[ 6.758850] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 6.799420] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 6.799628] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <4>[ 6.953209] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 6.953240] caller igen6_probe+0x190/0x9ea [igen6_edac] mapping multiple BARs <6>[ 6.963595] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 6.971671] ACPI: bus type thunderbolt registered <6>[ 6.973799] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.982865] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 6.982869] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 6.983067] pci 0000:00:08.0: Setting to D3hot <6>[ 6.987629] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 6.988106] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 6.988604] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 6.991139] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 6.991143] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 6.991232] EDAC igen6: v2.5.1 <6>[ 6.994346] pci 0000:00:05.0: Setting to D3hot <6>[ 6.997960] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 7.006880] intel_pmc_core INT33A1:00: initialized <6>[ 7.012809] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 7.012964] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <5>[ 7.024661] audit: type=1400 audit(1769764600.644:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=544 comm="apparmor_parser" <5>[ 7.025077] audit: type=1400 audit(1769764600.644:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=540 comm="apparmor_parser" <5>[ 7.025460] audit: type=1400 audit(1769764600.645:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=542 comm="apparmor_parser" <5>[ 7.026042] audit: type=1400 audit(1769764600.645:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=545 comm="apparmor_parser" <5>[ 7.026329] audit: type=1400 audit(1769764600.646:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=543 comm="apparmor_parser" <5>[ 7.026945] audit: type=1400 audit(1769764600.646:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=546 comm="apparmor_parser" <5>[ 7.027890] audit: type=1400 audit(1769764600.647:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=548 comm="apparmor_parser" <5>[ 7.028057] audit: type=1400 audit(1769764600.647:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=547 comm="apparmor_parser" <5>[ 7.032575] audit: type=1400 audit(1769764600.652:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=549 comm="apparmor_parser" <5>[ 7.035530] audit: type=1400 audit(1769764600.655:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=550 comm="apparmor_parser" <6>[ 7.036538] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 7.083130] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.147355] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.147878] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 7.148584] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 7.177527] usbcore: registered new device driver r8152-cfgselector <6>[ 7.192962] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.192967] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.192969] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.192970] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.192970] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.229037] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 7.247253] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 7.251153] intel_rapl_common: Found RAPL domain package <6>[ 7.256934] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.261880] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.275223] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.339230] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 7.354928] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.427607] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 7.427612] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 7.427731] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 7.430455] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.456065] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.464638] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.499453] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 7.502350] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.510416] usbcore: registered new interface driver r8152 <6>[ 7.538734] intel_rapl_msr: PL4 support detected. <6>[ 7.548476] intel_rapl_common: Found RAPL domain package <6>[ 7.548481] intel_rapl_common: Found RAPL domain core <6>[ 7.548483] intel_rapl_common: Found RAPL domain uncore <6>[ 7.548657] intel_rapl_common: Found RAPL domain psys <6>[ 7.556735] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.559649] usbcore: registered new interface driver cdc_ether <6>[ 7.561425] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 7.565909] usbcore: registered new interface driver r8153_ecm <6>[ 7.566535] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.575657] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.587362] hid: raw HID events driver (C) Jiri Kosina <6>[ 7.588694] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.597568] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.597596] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.598471] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 7.612514] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.632197] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.638646] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.640423] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.641703] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.642185] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.643390] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.644819] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.645055] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.645598] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.650033] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.653006] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.657219] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.657539] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.660909] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.662046] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.664581] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 7.667242] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.668865] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.670665] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 7.672884] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.679953] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.729771] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.734085] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.737698] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.741204] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.744812] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.748184] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.753462] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.758822] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.761732] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.765383] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.768914] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.773407] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.776060] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.779257] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.783737] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.787442] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.791173] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.795498] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.800860] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.805046] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.837291] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth1 <4>[ 7.940058] block nvme0n1: No UUID available providing old NGUID <6>[ 8.153392] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.331110] loop0: detected capacity change from 0 to 8 <6>[ 8.454682] Consider using thermal netlink events interface <6>[ 10.375416] r8152 4-1:1.0 enxe2015072f1a3: carrier on <3>[ 16.457104] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 18.556586] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.558319] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 32.892066] systemd-journald[307]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 39.735402] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 49.579727] [IGT] i915_module_load: executing <4>[ 49.579778] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.614523] [IGT] i915_module_load: starting subtest load <4>[ 50.197757] ********************************************************** <4>[ 50.197758] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.197759] ** ** <4>[ 50.197759] ** trace_printk() being used. Allocating extra memory. ** <4>[ 50.197760] ** ** <4>[ 50.197761] ** This means that this is a DEBUG kernel and it is ** <4>[ 50.197761] ** unsafe for production use. ** <4>[ 50.197762] ** ** <4>[ 50.197762] ** If you see this message and you are not debugging ** <4>[ 50.197763] ** the kernel, report this immediately to your vendor! ** <4>[ 50.197764] ** ** <4>[ 50.197764] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 50.197765] ********************************************************** <5>[ 50.234708] Setting dangerous option force_probe - tainting kernel <6>[ 50.239148] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 50.240329] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.240570] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 50.240750] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 50.240913] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 50.241122] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 50.241287] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 50.241488] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 50.241731] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 50.241966] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 50.242149] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 50.242727] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 50.242864] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 50.243362] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 50.243496] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 50.243967] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 50.244198] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 50.244322] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 50.244444] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 50.244582] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 50.245121] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 50.245468] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 50.245477] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 50.245657] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 50.246165] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 50.246430] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1942fff], io: n/a <7>[ 50.246572] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 50.246908] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 50.247086] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 50.247232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 50.247373] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 50.247521] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 50.247658] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 50.247813] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 50.247957] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 50.248114] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 50.248267] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 50.248417] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 50.248583] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 50.248747] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 50.248906] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 50.249064] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 50.249213] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 50.249359] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.249512] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.249657] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.249801] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 50.249943] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.250087] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.250230] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.250376] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.250529] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.250673] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.250816] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.250958] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.251100] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.251241] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.251382] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.251535] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.251680] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.251823] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.251966] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.252107] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.252248] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.252389] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.252549] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.253343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 50.253564] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 50.253711] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 50.253856] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 50.254000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 50.254142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 50.254285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 850) <7>[ 50.254436] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 50.254576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 50.254724] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 50.254866] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 50.255007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 50.255148] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 50.255293] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 50.255446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 50.255586] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 50.255726] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 50.255864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 50.256006] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 50.256146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.256285] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 50.256433] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.256572] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.256718] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 50.256859] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.257000] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.257140] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.257278] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.257424] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.257567] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.257712] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 50.257877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.258080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 50.258269] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.258529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 50.258771] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 50.258943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 50.259094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 50.259246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.259455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 50.259609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 50.259775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 50.259933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 50.260089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 50.260669] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 50.261472] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 50.262640] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 50.262799] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 50.262951] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 50.263106] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 50.263253] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 50.263417] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 50.263558] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 50.263694] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 50.263830] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 50.263966] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 50.264101] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 50.264236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 50.264389] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 50.267029] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 50.267198] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 50.267420] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 50.267585] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 50.267736] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 50.267885] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 50.268041] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 50.268202] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 50.268351] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.268514] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 50.268674] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.268856] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 50.269055] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.269227] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 50.269386] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.269544] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 50.269702] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 50.269853] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 50.270000] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.270146] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 50.270305] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.270460] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 50.270460] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 50.270617] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.270771] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 50.270930] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.271091] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 50.271276] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 50.271434] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 50.271590] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.271748] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 50.271905] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.272061] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 50.272245] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 50.272406] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 50.272565] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.272724] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 50.272889] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.273050] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 50.278951] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.279240] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 50.279426] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 50.281001] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:506:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.281506] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:506:DDI A/PHY A] <7>[ 50.281729] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 50.281891] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <6>[ 50.282042] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 50.282059] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 50.282228] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.282416] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 50.282590] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.282739] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 50.282887] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.283073] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.283273] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:506:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.283537] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.283702] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.283850] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.284013] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.284172] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.284463] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.284821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.286117] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.286449] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.287701] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.288071] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 50.288642] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 50.289434] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 50.289891] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 50.291165] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.296900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.296909] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 50.296914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 50.296961] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:507:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.297411] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:507:eDP-1] Performing OUI wait (0 ms) <7>[ 50.297888] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:507:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.298060] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:507:eDP-1] DRRS type: none <7>[ 50.298299] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:507:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.298485] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:507:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.298691] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.298887] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.299040] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.299201] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.299345] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.299610] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.299894] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:515:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.300076] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:515:DDI B/PHY B] <7>[ 50.300509] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:515:DDI B/PHY B] <7>[ 50.300645] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:515:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.301007] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:533:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.301297] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.301557] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:533:DDI TC1/PHY TC1] <7>[ 50.301917] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.302170] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.302525] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.302680] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:542:DDI TC2/PHY TC2] <7>[ 50.302829] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:542:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.303052] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:546:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.303279] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.303512] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:546:DDI TC3/PHY TC3] <7>[ 50.303809] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:555:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.304044] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.304295] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:555:DDI TC4/PHY TC4] <7>[ 50.304738] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] VGA plane is disabled <6>[ 50.304908] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7>[ 50.305652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] hw state readout: enabled <7>[ 50.306001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] hw state readout: disabled <7>[ 50.306349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] hw state readout: disabled <7>[ 50.306645] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] hw state readout: disabled <7>[ 50.306818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] hw state readout: enabled, pipe A <7>[ 50.306999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7>[ 50.307177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7>[ 50.307325] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7>[ 50.307473] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7>[ 50.307621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7>[ 50.307807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7>[ 50.307986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7>[ 50.308162] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7>[ 50.308327] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7>[ 50.308475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7>[ 50.308634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7>[ 50.308781] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C <7>[ 50.308941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C <7>[ 50.309106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C <7>[ 50.309270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C <7>[ 50.309423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C <7>[ 50.309570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] hw state readout: disabled, pipe C <7>[ 50.309730] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D <7>[ 50.309893] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D <7>[ 50.310064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D <7>[ 50.310229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D <7>[ 50.310377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D <7>[ 50.310523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] hw state readout: disabled, pipe D <7>[ 50.311601] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.311799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:506:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.311976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:515:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.312139] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.312277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.312412] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.312548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:520:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.312750] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.312913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:533:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.313069] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.313210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.313344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.313480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:538:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.313674] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.313832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:542:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.314001] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.314158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:546:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.314300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.314436] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.314579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.314717] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:551:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.314888] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.315047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:555:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.315189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.315321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.315453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.315597] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:560:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.316544] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 50.316698] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.316873] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.317037] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.317190] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.317344] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.317496] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.317666] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.317967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:507:eDP-1] hw state readout: enabled <7>[ 50.318155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:516:DP-1] hw state readout: disabled <7>[ 50.318313] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:528:HDMI-A-1] hw state readout: disabled <7>[ 50.318470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:534:DP-2] hw state readout: disabled <7>[ 50.318644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:543:HDMI-A-2] hw state readout: disabled <7>[ 50.318823] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:547:DP-3] hw state readout: disabled <7>[ 50.318996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:556:DP-4] hw state readout: disabled <7>[ 50.319241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:34:plane 1A] min_cdclk 256910 kHz <7>[ 50.319380] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7>[ 50.319528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7>[ 50.319666] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7>[ 50.319824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7>[ 50.319977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:144:cursor A] min_cdclk 0 kHz <7>[ 50.320130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:150:pipe A] min_cdclk 256910 kHz <7>[ 50.320265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7>[ 50.320401] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7>[ 50.320546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7>[ 50.320691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7>[ 50.320851] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7>[ 50.320999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:262:cursor B] min_cdclk 0 kHz <7>[ 50.321136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:268:pipe B] min_cdclk 0 kHz <7>[ 50.321270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:270:plane 1C] min_cdclk 0 kHz <7>[ 50.321405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:300:plane 2C] min_cdclk 0 kHz <7>[ 50.321550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:330:plane 3C] min_cdclk 0 kHz <7>[ 50.321688] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:360:plane 4C] min_cdclk 0 kHz <7>[ 50.321829] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:370:plane 5C] min_cdclk 0 kHz <7>[ 50.321969] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:380:cursor C] min_cdclk 0 kHz <7>[ 50.322108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:386:pipe C] min_cdclk 0 kHz <7>[ 50.322241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:388:plane 1D] min_cdclk 0 kHz <7>[ 50.322376] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:418:plane 2D] min_cdclk 0 kHz <7>[ 50.322560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:448:plane 3D] min_cdclk 0 kHz <7>[ 50.322699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:478:plane 4D] min_cdclk 0 kHz <7>[ 50.322841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:488:plane 5D] min_cdclk 0 kHz <7>[ 50.322981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:498:cursor D] min_cdclk 0 kHz <7>[ 50.323113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:504:pipe D] min_cdclk 0 kHz <7>[ 50.323454] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:150:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.323597] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.323746] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.323894] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.324029] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.324184] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.324333] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.324490] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.324810] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.325142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [setup_hw_state] <7>[ 50.325294] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.325451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.325595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.325738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.325880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.326022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.326164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.326305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.326460] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.326603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.326747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.326890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.327033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.327173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.327312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.327459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.327603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.327745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.327886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.328026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.328165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.328303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.328449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.328592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.328736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.328877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.329016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.329155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.329295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.329444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: no, <7>[ 50.329584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.329725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.329865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.330004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.330142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.330280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.330448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.330589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.330730] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.330869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.331007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.331144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.331281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.331430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.331567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.331705] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.331846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.331986] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.332124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.332262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.332412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.332552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7>[ 50.332691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [setup_hw_state] <7>[ 50.332829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [setup_hw_state] <7>[ 50.332966] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.333308] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:150:pipe A][PLANE:34:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.333464] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.333612] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.334087] i915 0000:00:02.0: [drm:initial_plane_vma [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.341313] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.347886] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.348043] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.348199] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.348340] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.348481] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.348617] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.348757] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.351318] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.351477] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.351625] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.352436] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.352589] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.352981] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.353141] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.354231] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.354409] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.354575] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.374336] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.374527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.374672] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.374853] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.374995] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.375135] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.375272] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.375410] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.375546] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.375682] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.375830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.375970] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.376108] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.376244] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.377137] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.386625] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1600MHz -> 2100MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.387566] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.389109] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.389111] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.389555] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.389852] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.390641] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.397710] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.397890] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.399198] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.399373] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.400181] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.400331] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.400975] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.401131] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.402003] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.402155] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.403811] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.404002] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.404172] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.424693] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.424868] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.425025] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.425173] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.425315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.425454] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.425591] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.425728] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.425865] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.426007] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.426145] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.426284] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.426421] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.426556] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.426693] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.428819] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.429106] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.429512] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.429514] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.442842] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 11ms, freq = 1250MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.443202] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.451724] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.451895] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.452789] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.452791] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.452973] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.453187] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.454135] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 50.461860] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.462128] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.462366] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.462561] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.462741] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.462924] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.463087] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.464626] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.466226] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7>[ 50.466390] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7>[ 50.466567] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7>[ 50.466717] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7>[ 50.466864] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7>[ 50.467013] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7>[ 50.467155] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7>[ 50.467312] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7>[ 50.467475] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7>[ 50.467618] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7>[ 50.467765] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 0: start 0x52008 <7>[ 50.467906] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 1: start 0x52108 <7>[ 50.468048] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 2: start 0x52208 <7>[ 50.468190] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 3: start 0x52308 <7>[ 50.468332] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:386:pipe C] FQ 4: start 0x523c8 <7>[ 50.468497] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 0: start 0x59008 <7>[ 50.468635] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 1: start 0x59108 <7>[ 50.468774] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 2: start 0x59208 <7>[ 50.468921] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 3: start 0x59308 <7>[ 50.469060] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:504:pipe D] FQ 4: start 0x593c8 <7>[ 50.469504] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.469661] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.469833] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:34:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.469990] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.470134] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.470273] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.470421] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.470557] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.470742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:268:pipe B] enable: no [fastset] <7>[ 50.470903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:386:pipe C] enable: no [fastset] <7>[ 50.471059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:504:pipe D] enable: no [fastset] <7>[ 50.472381] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.472552] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:34:plane 1A] <7>[ 50.472759] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.472920] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.483764] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:268:pipe B] <7>[ 50.484167] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:386:pipe C] <7>[ 50.484546] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:504:pipe D] <7>[ 50.488240] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:eDP-1] adding connector to sysfs <7>[ 50.491771] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:507:eDP-1] backlight device intel_backlight registered <7>[ 50.491962] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.492224] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:507:eDP-1] Panel prepare <7>[ 50.492605] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.494337] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:eDP-1] generating connector hotplug event <7>[ 50.494416] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:516:DP-1] adding connector to sysfs <7>[ 50.494898] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.495775] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:516:DP-1] generating connector hotplug event <7>[ 50.495812] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:528:HDMI-A-1] adding connector to sysfs <7>[ 50.496088] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:528:HDMI-A-1] generating connector hotplug event <7>[ 50.496127] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:DP-2] adding connector to sysfs <7>[ 50.496550] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.497312] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:DP-2] generating connector hotplug event <7>[ 50.497350] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:543:HDMI-A-2] adding connector to sysfs <7>[ 50.497613] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:543:HDMI-A-2] generating connector hotplug event <7>[ 50.497653] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:547:DP-3] adding connector to sysfs <7>[ 50.498024] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.498763] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:547:DP-3] generating connector hotplug event <7>[ 50.498800] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:556:DP-4] adding connector to sysfs <7>[ 50.499242] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.500055] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:556:DP-4] generating connector hotplug event <6>[ 50.500091] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.502473] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.513848] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.517121] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.518795] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.519020] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.519666] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.519672] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.520526] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:34:plane 1A] <7>[ 50.520712] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <6>[ 50.520866] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.520894] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 50.521060] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 50.521226] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:34:plane 1A] for BIOS fb <7>[ 50.521309] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.521384] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:150:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.521533] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:34:plane 1A] (20738048 >= 20736000) <7>[ 50.521706] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:268:pipe B] not active, skipping <7>[ 50.521864] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:386:pipe C] not active, skipping <7>[ 50.522019] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:504:pipe D] not active, skipping <7>[ 50.522164] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.522847] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.523917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.525695] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.527409] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.527983] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.528018] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.528240] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:516:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.528410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.532642] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:528:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.532802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.533339] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.533655] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:534:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.533824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.534157] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.538333] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:543:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.538518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.538770] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.539000] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:547:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.539153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.539389] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.539627] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:556:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.539783] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.539947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 50.540027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 50.542045] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.542628] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.542874] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.543111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.543513] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.543521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 50.543527] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 50.543563] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 50.543799] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.544028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.545070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] status updated from unknown to connected <7>[ 50.545372] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.545862] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 50.545871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.545877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 50.545883] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 50.550201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 50.550212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 50.550218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 50.554547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 50.554556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 50.554561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 50.555169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 50.555176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 50.555191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 50.559721] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 50.559732] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 50.559738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 50.560478] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 50.560486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 50.560503] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 50.560954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 50.560961] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 50.560966] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 50.560980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 50.560984] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 50.560987] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 50.560990] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 50.560993] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 50.561157] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.561196] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 50.561200] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.561219] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.561394] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.561424] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.561783] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.564023] fbcon: i915drmfb (fb0) is primary device <7>[ 50.566434] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:507:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.566782] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:506:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7>[ 50.567086] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.567385] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.567674] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:506:DDI A/PHY A] [CRTC:150:pipe A] <7>[ 50.567954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.568278] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.568560] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.568837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.569122] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: no, <7>[ 50.569398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.569672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.569945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.570224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.570499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.570769] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.571045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.571318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.571592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.571874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.572154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: fracen: yes, <7>[ 50.572438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.572706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.572977] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.573243] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.573512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.573781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.574192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.574471] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.574739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.575014] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.575288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.575557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:150:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.575824] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.576098] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:150:pipe A] releasing DPLL 0 <7>[ 50.576651] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.576941] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.577095] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.577246] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:34:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.577398] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.577544] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.577687] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.577826] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:64:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.577979] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.578131] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.578294] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.578440] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:94:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.578576] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.578715] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.578862] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.579004] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:124:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.579142] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.579278] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.579422] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.579569] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:134:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.579718] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.579864] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.580000] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.580136] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:144:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.580288] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.580443] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.580591] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.580735] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.580893] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.581069] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:150:pipe A] allocated DPLL 0 <7>[ 50.581232] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:150:pipe A] reserving DPLL 0 <7>[ 50.581399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:150:pipe A] enable: yes [modeset] <7>[ 50.581550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.581699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.581865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.582068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.582281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.582487] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.582649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.582791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.582953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.583123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.583284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.583443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.583587] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.583727] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.583880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.584022] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.584172] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.584330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.584479] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.584637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.584794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.584934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.585097] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.585259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7>[ 50.585417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.585563] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.585700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.585856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.586015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.586196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.586359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.586523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.586665] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.586817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.586975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.587149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: fracen: yes, <7>[ 50.587316] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.587478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.587618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.587767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.587912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.587844] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.588058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.588137] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.588214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.588367] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.588398] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.588518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.588667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.588652] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.588844] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.588910] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.588988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.589128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.589158] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.589270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.589403] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.589442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.589640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.589646] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.589876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.589924] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.590079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.590247] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.590283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.590410] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.590492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.590577] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.590723] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.590761] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.590899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.590919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.591076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:34:plane 1A] fb: [FB:565] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.591127] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.591278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.591335] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.591475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.591499] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.591651] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.591692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7>[ 50.591857] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.591895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7>[ 50.592107] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.592125] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7>[ 50.592320] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.592341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7>[ 50.592471] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.592509] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7>[ 50.592619] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.592780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.592954] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.593136] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.593304] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.593455] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.593604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.593807] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.594036] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.594325] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.594478] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.594629] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.594806] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.594969] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.594981] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 50.600301] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.601830] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.602398] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.603202] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 50.611508] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 50.632084] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.632427] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.800965] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 0 <7>[ 50.802098] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.808754] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.808735] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.809156] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - short <7>[ 50.809212] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.809680] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.861602] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.862233] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 50.862695] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.868866] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.869373] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.869382] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7>[ 50.869648] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 50.870739] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.871170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.871902] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:34:plane 1A] <7>[ 50.872644] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.873289] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:506:DDI A/PHY A] <7>[ 50.873887] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:515:DDI B/PHY B] <7>[ 50.874400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST A] <7>[ 50.874862] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST B] <7>[ 50.875242] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST C] <7>[ 50.875618] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:520:DP-MST D] <7>[ 50.876022] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:533:DDI TC1/PHY TC1] <7>[ 50.876366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST A] <7>[ 50.876543] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST B] <7>[ 50.876732] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST C] <7>[ 50.876911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:538:DP-MST D] <7>[ 50.877087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:542:DDI TC2/PHY TC2] <7>[ 50.877261] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:546:DDI TC3/PHY TC3] <7>[ 50.877434] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST A] <7>[ 50.877608] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST B] <7>[ 50.877789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST C] <7>[ 50.877932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:551:DP-MST D] <7>[ 50.878074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:555:DDI TC4/PHY TC4] <7>[ 50.878217] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST A] <7>[ 50.878359] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST B] <7>[ 50.878501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST C] <7>[ 50.878645] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:560:DP-MST D] <7>[ 50.878894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.880304] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7>[ 50.880493] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.882416] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.882591] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7>[ 51.091819] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.369520] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 51.380371] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.381054] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.381647] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.412763] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.413405] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:506:DDI A/PHY A] - long <7>[ 51.413982] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.414663] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:506:DDI A/PHY A] <7>[ 51.553190] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.553178] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.553307] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.553967] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.590837] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.591984] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.592701] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.596390] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.597712] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.598430] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.599492] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.600378] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.601339] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.601477] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.602839] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.602971] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:507:eDP-1][ENCODER:506:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.603583] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.603857] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.603998] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.604196] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:507:eDP-1] set backlight PWM = 192000 <7>[ 51.615045] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.616827] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.617155] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:150:pipe A] <7>[ 51.618769] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.620290] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <7>[ 51.620777] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <6>[ 51.621138] Console: switching to colour frame buffer device 180x56 <7>[ 51.621399] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:507:eDP-1] set backlight level = 13892 <6>[ 51.638687] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.638696] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.638964] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.638985] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.638953] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.639135] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.639289] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.639442] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.639575] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 51.639593] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.639589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.639742] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.639915] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.640061] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.640206] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.640349] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.640492] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.640639] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.640802] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.640954] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.641103] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.641251] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.641401] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.641551] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.641700] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.641879] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.642022] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.642165] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.642589] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.642754] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.642774] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.642902] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.642944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.643198] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.643203] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 51.643247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 51.643268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 51.643309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.643404] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.643504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.643538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.643770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.643903] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.644044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.644202] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.644399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 51.644407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.644410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 51.644351] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.644413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 51.644504] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.644656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.644893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.645013] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.645136] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.645253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.645369] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.645487] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.645606] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.645733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.645849] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.645964] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.646078] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.646191] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.646307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.646422] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.646537] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.646650] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.646776] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.646888] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.647002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.647116] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.647230] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.647344] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.647454] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.647565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.647683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.647797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.647947] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.648123] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.648255] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.648370] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.648484] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.648601] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 51.648607] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 51.648598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.648612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 51.648723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.648837] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.648952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.649067] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.649182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.649295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.649407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.649518] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.649634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.649781] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.649895] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.650007] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.650120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.650233] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.650346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.650479] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.650659] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.650802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.650928] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.651044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.651159] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.651271] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.651382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.651494] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.651609] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.651746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.651860] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.651972] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.652083] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.652196] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.652309] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.652309] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.652310] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.652829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 51.652835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 51.652838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 51.653264] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.653531] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 51.653536] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 51.653539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 51.653869] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.658053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 51.658058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 51.658061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 51.658288] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.658485] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 51.658488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 51.658491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 51.658812] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.659016] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 51.659018] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 51.659021] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 51.659025] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 51.659027] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 51.659028] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 51.659030] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 51.659032] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 51.659119] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.659135] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 51.659137] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.659160] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.670997] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.692860] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.692872] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.693290] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] <7>[ 51.693303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:507:eDP-1] <7>[ 51.694302] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.694858] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.695050] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.695240] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.695521] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.695526] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor <7>[ 51.695534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0 <7>[ 51.695560] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] VRR capable: no <7>[ 51.695740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.695916] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.696896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes: <7>[ 51.696905] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.696911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] <7>[ 51.696915] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:516:DP-1] <7>[ 51.701288] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:DP-1] disconnected <7>[ 51.701295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] <7>[ 51.701299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:528:HDMI-A-1] <7>[ 51.705583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:528:HDMI-A-1] disconnected <7>[ 51.705589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] <7>[ 51.705593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:534:DP-2] <7>[ 51.706068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:DP-2] disconnected <7>[ 51.706074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] <7>[ 51.706078] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:543:HDMI-A-2] <7>[ 51.710405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:543:HDMI-A-2] disconnected <7>[ 51.710411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] <7>[ 51.710416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:547:DP-3] <7>[ 51.710770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:547:DP-3] disconnected <7>[ 51.710774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] <7>[ 51.710778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:556:DP-4] <7>[ 51.711138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:556:DP-4] disconnected <7>[ 51.711142] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes <7>[ 51.711146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:DP-1] enabled? no <7>[ 51.711149] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:528:HDMI-A-1] enabled? no <7>[ 51.711151] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:DP-2] enabled? no <7>[ 51.711154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:543:HDMI-A-2] enabled? no <7>[ 51.711157] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:547:DP-3] enabled? no <7>[ 51.711159] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:556:DP-4] enabled? no <7>[ 51.711280] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.711299] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 2880x1800 <7>[ 51.711303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.711337] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.715659] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.718774] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.726404] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.748934] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.749076] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.751643] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.782061] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.782174] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.782569] [IGT] i915_module_load: exiting, ret=0 <7>[ 51.843390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 52.754112] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.754203] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.754521] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.754599] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.213120] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.213623] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:506:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 54.213938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 54.214639] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 54.215027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02