igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	12.77 seconds
Igt-Version	IGT-Version: 2.3-g5762c78a9 (x86_64) (Linux: 6.19.0-rc6-CI_DRM_17845-gd5c984207665+ x86_64)
Out	Using IGT_SRANDOM=1768870835 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888112d81820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881087f9820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff8881087f9820 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1e/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x122/0x7f0 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9b9/0x14d0 [i915] intel_ddi_init+0xcea/0x11e0 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x16a/0x260 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888202851820 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x1f/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.770s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.770s)
Dmesg	<6> [276.012421] Console: switching to colour dummy device 80x25 <6> [276.013964] [IGT] i915_pm_rpm: executing <7> [276.017336] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [276.018314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [276.018329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [276.019079] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.019465] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.019871] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.020277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.020289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [276.020297] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [276.020333] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [276.020687] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.021048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.023144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [276.023157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.023169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.023309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [276.023319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [276.027857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [276.028001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [276.028013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [276.031018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.031326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.031804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.032233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.032245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.032581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.035860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.035873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.036265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [276.036400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [276.036412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [276.040895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [276.040987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [276.040995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [276.041509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.041820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.042284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.042535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.042542] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.042782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.045870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.045878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.046136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [276.052677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [276.052688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [276.057074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [276.057751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [276.057764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [276.058321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.058555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.058991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.059306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.059315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.059532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.062628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.062639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.062963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [276.063616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [276.063625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [276.067978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [276.068622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [276.068631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [276.069166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.069382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.069791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.070045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.070052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.070276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.073260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.073267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.073501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [276.074015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [276.074027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [276.074284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.074496] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.074718] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.074977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.074984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [276.074989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [276.075026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [276.075245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.075453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.076994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [276.077004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.077011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.077045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [276.077053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [276.081407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [276.081440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [276.081447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [276.081970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.082180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.082567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.082848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.082859] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.083078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.086072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.086081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.086322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [276.086353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [276.086360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [276.090674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [276.090767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [276.090778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [276.091407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.091771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.092491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.092913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.092922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.093250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.096427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.096437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.096847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [276.097595] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140] <7> [276.408265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.143308] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [277.143952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [277.145010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [277.146000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [277.147164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [277.148158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [277.149285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [277.150280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [277.151330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.152376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [277.153783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.154842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.156272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.157291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.158823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.160350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.161850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.163365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.164764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [277.166303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.167813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.169248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [277.170731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.172253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.173677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.174626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.175546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.176474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.177261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.178166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.178966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [277.179661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.180332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [277.181033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [277.181732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [277.182369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [277.182956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [277.183501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [277.183895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [277.184320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [277.184696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [277.185117] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [277.185533] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [277.185929] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [277.186327] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [277.186791] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [277.187175] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.187523] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.187912] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.188431] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [277.188811] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [277.189198] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [277.189478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [277.189776] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [277.190138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [277.190498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [277.190859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [277.191205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [277.191734] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [277.193618] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [277.399991] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [277.401858] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [277.421905] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [277.422424] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [277.422989] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [277.423782] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [277.424436] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [277.476086] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [277.476489] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [277.477375] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [277.478452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [277.478629] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [277.484831] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [277.486338] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [277.487640] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [277.489823] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [277.491445] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [277.495074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [277.496806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [277.498384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [277.499850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [277.501307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [277.502836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [277.504309] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [277.505817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [277.507141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [277.508693] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [277.511546] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [277.515443] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [277.516992] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [277.616252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [277.618310] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [277.619389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [277.621335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [277.625843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [277.653168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [277.733522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [277.734714] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [277.736181] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [277.737806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [277.739394] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [277.740803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [277.742451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [277.744075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [277.745844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [277.747630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [277.749384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [277.750937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [277.752491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [277.754146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [277.755672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [277.757126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [277.758677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [277.760269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [277.761642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [277.763034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [277.764393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [277.765787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [277.767145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [277.768479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [277.769839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [277.771162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [277.772511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [277.773868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [277.775192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [277.776590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [277.777949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [277.779300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [277.780637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [277.781979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [277.783321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [277.784676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [277.786028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [277.787414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [277.788765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [277.790113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [277.791476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [277.792873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [277.794237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [277.795602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [277.796948] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [277.798679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [277.800062] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [277.801382] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [277.802670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [277.803964] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [277.805263] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [277.806534] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [277.808478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [277.810008] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [277.811183] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [277.812214] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [277.813253] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [277.814299] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [277.815171] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [277.816305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [277.817243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [277.818299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [277.819166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [277.820427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [277.821431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [277.822489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [277.823353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [277.824385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [277.825256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [277.826283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [277.827149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [277.828244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [277.829215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [277.830458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [277.831422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [277.832340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [277.833260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [277.834321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [277.835214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [277.836253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [277.837145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [277.838192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [277.839151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [277.840279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [277.841225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [277.842288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [277.842893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [277.843595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [277.844138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [277.844721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [277.845393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [277.845969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [277.846726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [277.847448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [277.848105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [277.848827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [277.849363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [277.849941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.850688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.851226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [277.851689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [277.852191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [277.852630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [277.853142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [277.853619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [277.854062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [277.854465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [277.866612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [277.876864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [277.877141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [277.877683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [277.878905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [277.879770] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [277.880923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [277.881302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [277.881689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [277.882050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [277.882394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [277.882769] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [277.883126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [277.883481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [277.883858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [277.884481] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [277.884878] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [277.885523] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [277.886090] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining) <7> [277.983956] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [278.034263] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.035409] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [278.036480] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [278.085071] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.086008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [278.086899] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.087788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [278.235615] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.237252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [278.238757] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.241233] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [278.242393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [278.248393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [278.249668] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [278.252149] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [278.253210] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.254224] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [278.258266] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [278.259790] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [278.261262] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [278.265585] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [278.266479] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [278.267435] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [278.271640] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [278.273129] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [278.276115] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [278.279548] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [278.281023] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [278.283168] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [278.295234] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [278.303486] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [278.304885] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [278.311018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [278.311740] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [278.317019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <6> [278.317900] [IGT] i915_pm_rpm: starting subtest module-reload <7> [278.319032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.320461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [278.322058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.323618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.323659] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.325164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [278.331197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.331243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [278.332910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [278.338216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [278.339617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.340534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [278.342026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.342845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.342864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.343612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [278.349105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.349130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [278.443206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.443988] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [278.456664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [278.482085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.482459] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [278.494660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [278.527538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.529033] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [278.540097] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [278.540594] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [278.541017] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [278.541424] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [278.545291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [278.545737] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [278.546147] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [278.548511] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [278.548894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [278.550339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [278.647816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [278.648900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [278.649603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [278.650271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [278.652758] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [278.652920] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [278.653613] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [278.654278] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.655076] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.655922] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [278.660904] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [278.678866] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [278.689602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [278.690169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [278.690786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [278.691407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [278.691986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [278.692779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [278.693284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [278.694011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [278.694782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [278.695630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [278.696439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [278.697288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [278.698094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [278.698969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [278.699789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [278.700638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [278.701436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [278.702364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [278.703208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [278.704056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [278.704867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [278.705696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [278.706522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [278.707332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [278.708206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [278.709043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [278.709900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [278.710726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [278.711574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [278.712372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [278.713218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [278.714033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [278.714882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [278.715690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [278.716541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [278.717334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [278.718186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [278.719002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [278.719849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [278.720672] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [278.721526] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [278.722504] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [278.723398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [278.724426] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [278.725258] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [278.726086] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [278.726890] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [278.727725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [278.728532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [278.729335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [278.730140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [278.733064] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [278.935973] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [278.938375] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [278.948758] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [278.949080] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [278.950896] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [278.951084] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [278.952827] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [279.003091] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [279.003575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [279.004161] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [279.005149] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [279.006188] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [279.007681] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [279.011273] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [279.013309] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [279.014480] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [279.017755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [279.019489] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [279.020957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [279.022472] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [279.023993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [279.025305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [279.027116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [279.030146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [279.031625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [279.032729] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [279.034895] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [279.091404] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [279.141371] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [279.165246] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [279.168368] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [279.187152] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [279.191684] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [279.215623] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (289 ms remaining) <7> [279.511728] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [279.543628] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [280.198724] [IGT] Reloading i915 w/o display <5> [281.134349] Setting dangerous option force_probe - tainting kernel <6> [281.146555] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [281.148085] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [281.148505] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [281.148758] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [281.149018] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [281.149334] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [281.149732] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [281.149967] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [281.150933] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [281.151173] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [281.151398] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [281.151603] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [281.151613] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [281.152342] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [281.152399] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [281.152659] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [281.152895] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e8fff], io: n/a <7> [281.153089] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [281.153807] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [281.154136] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [281.154414] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [281.154725] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [281.154977] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [281.163312] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [281.163594] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [281.163846] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [281.164098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [281.164465] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.164792] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.165112] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [281.165448] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.165767] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.166088] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [281.166353] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [281.166560] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [281.166751] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [281.167009] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [281.167349] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [281.167671] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [281.168885] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [281.169192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [281.169498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [281.169908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [281.170326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [281.170733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [281.171156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [281.171537] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [281.171813] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [281.172084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [281.172372] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [281.172647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [281.172896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [281.173144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [281.173424] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [281.173704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.173964] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.174229] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [281.174566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.174843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [281.175110] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.175378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [281.175647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.175895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [281.176154] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [281.176452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.176793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.177065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [281.177448] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.177728] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [281.177997] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [281.178257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.178630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.178886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.179138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.179473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.179833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.180145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.180431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.180761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.181632] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [281.182773] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [281.183063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [281.183391] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [281.183778] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [281.183971] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [281.184722] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [281.185413] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [281.185512] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [281.185895] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [281.186164] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [281.186436] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [281.186729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [281.186983] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [281.187236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [281.187503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [281.187793] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [281.188047] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [281.188316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [281.188605] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [281.188859] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [281.189124] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [281.189396] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [281.189678] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [281.189924] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [281.193298] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [281.196982] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.197470] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [281.197910] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [281.206300] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [281.206762] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [281.207174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [281.207613] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [281.208037] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [281.208478] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [281.208886] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [281.209314] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [281.209725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [281.210138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [281.210697] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [281.211165] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [281.211579] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [281.211971] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [281.212368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [281.212762] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [281.213201] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [281.213928] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [281.214366] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [281.214801] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [281.224272] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.224737] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [281.225140] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [281.436588] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [281.437520] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [281.439170] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [281.442428] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [281.452336] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [281.452353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [281.452362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [281.452498] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.452929] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.453359] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [281.453983] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [281.454380] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [281.454900] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [281.455277] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [281.455664] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [281.455984] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [281.456346] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [281.456791] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [281.457615] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [281.458002] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [281.459270] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [281.459593] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [281.459871] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [281.460545] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [281.460868] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [281.461747] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [281.462079] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [281.462400] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [281.463359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [281.463804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [281.464258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [281.464604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [281.464960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [281.465411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [281.465769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [281.466098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [281.466426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [281.466731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [281.467025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [281.467387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [281.467687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [281.467999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [281.468343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [281.468650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [281.468922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [281.469220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [281.469530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [281.469815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [281.470081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [281.470421] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [281.470727] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [281.471105] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [281.471452] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [281.472019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [281.472548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [281.473042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [281.473565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [281.473919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [281.474189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [281.474500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [281.474908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [281.475328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [281.475738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [281.476155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [281.476450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [281.476746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [281.477037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [281.477451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [281.477845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [281.478277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [281.478688] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.478962] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.479247] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [281.479798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [281.480204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [281.480643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [281.481062] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [281.481474] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [281.481713] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [281.481999] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [281.482414] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [281.484836] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [281.485119] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [281.485423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [281.506657] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [281.506910] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [281.507127] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [281.507470] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [281.507807] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [281.508245] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [281.508653] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [281.509064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [281.509377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [281.509702] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [281.509978] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [281.510399] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [281.510808] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [281.511228] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [281.511624] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [281.511990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [281.512255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [281.512543] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [281.512893] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [281.513628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [281.514016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [281.514418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [281.514993] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [281.515669] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [281.516089] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [281.516592] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [281.522698] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [281.524193] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [281.524695] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [281.525754] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [281.528060] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [281.528208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [281.529776] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [281.532600] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [281.532747] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [281.536712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [281.536847] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [281.540683] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [281.544757] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [281.544921] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [281.547726] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [281.547817] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [281.553941] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [281.593294] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [281.603346] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [281.606281] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [281.611399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.611861] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [281.612680] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [281.613101] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [281.613533] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [281.613936] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [281.614368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.614763] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [281.615166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.615606] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [281.616033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.616443] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [281.616855] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [281.620590] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.623842] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [281.624005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [281.624020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [281.624492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected <7> [281.624513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [281.624622] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2 <7> [281.624652] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [281.624663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.625074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [281.625087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [281.625098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.625535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [281.625631] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [281.626004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [281.626022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.626441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [281.626615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [281.626628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.627037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [281.627077] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [281.627086] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [281.627095] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [281.627102] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [281.627110] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [281.627118] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [281.627174] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [281.627194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [281.630091] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [281.630109] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [281.633536] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [281.634026] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [281.634485] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [281.634903] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [281.635348] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [281.635767] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [281.636194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [281.636655] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [281.637085] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [281.637540] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [281.637967] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [281.638415] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [281.638826] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [281.639267] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [281.639679] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [281.640082] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [281.640546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [281.640976] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [281.641425] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [281.641842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [281.642297] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [281.642714] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [281.643342] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [281.643482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [281.643497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [281.643904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected <7> [281.643920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [281.643931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [281.644349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [281.644363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [281.644375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [281.644769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [281.644783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [281.644795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [281.645191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [281.645204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [281.645229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [281.645633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [281.645646] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [281.645656] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no <7> [281.645665] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [281.645674] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [281.645683] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [281.645692] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [281.645757] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [281.645778] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [281.645886] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [281.645919] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [281.646096] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [281.647297] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [281.647742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [281.648187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [281.648630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [281.649057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [281.649511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [281.650850] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [281.651249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [281.651587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [281.651927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [281.652349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [281.652678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [281.653010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [281.653367] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [281.653695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [281.654016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [281.654357] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [281.654681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [281.655007] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [281.655359] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [281.655681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [281.656005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [281.656350] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [281.656684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [281.657022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [281.657371] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [281.657708] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [281.658046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [281.658391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [281.658720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [281.659045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [281.659385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [281.659723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [281.660059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [281.660398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [281.660725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [281.661051] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [281.661390] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [281.661714] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [281.662041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [281.662385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [281.662713] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [281.663040] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [281.663384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [281.663705] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [281.664028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [281.664363] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [281.664683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [281.665007] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [281.665350] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [281.665678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [281.666005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [281.666336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [281.666658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [281.666978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [281.667318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [281.667643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [281.667962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [281.668284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [281.668600] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [281.668918] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [281.669252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [281.669569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [281.669893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [281.670225] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [281.670543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [281.670855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [281.671176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [281.671533] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [281.671537] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [281.671540] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [281.687094] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [281.688059] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [281.688692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.689805] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [281.691119] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [281.725373] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.726386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.726758] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [281.727114] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.727507] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.727859] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [281.730230] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [281.730578] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [281.730933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [281.758003] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [281.766690] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [281.768308] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [283.031241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [283.976939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off <7> [283.977836] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [283.978693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [283.979916] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [283.980233] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.980485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.980486] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [283.980900] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [283.981246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.982366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [283.982349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [283.990077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [284.118948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [284.144206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [284.151181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [284.151529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.151790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [284.152037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [284.152101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.152406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [284.152877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.153016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [284.153556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.154041] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.166853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.167275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.167612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.167848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.168519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.280766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.281121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.281739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.282294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.284484] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.292033] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.292298] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.292517] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.292735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.293067] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.293379] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.293613] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.293853] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.294112] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.294828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.295666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.296084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.296453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.297241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.389957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.390897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.392466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.393652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.395162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.396076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.396891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.397948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.399293] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [284.446283] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [284.461358] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [284.471583] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [284.477635] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [284.485670] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [284.488916] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [284.514990] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [284.515312] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.525163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [284.934845] [IGT] Reloading i915 as normal <5> [285.780118] Setting dangerous option force_probe - tainting kernel <6> [285.792732] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [285.794740] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [285.795161] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [285.795534] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [285.795933] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [285.796399] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [285.796969] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [285.797203] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [285.798326] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [285.798667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [285.799044] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [285.799371] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [285.799385] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [285.800172] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [285.800212] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [285.800464] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [285.800700] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e8fff], io: n/a <7> [285.800911] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [285.801624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [285.801950] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [285.802232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [285.802475] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [285.802717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [285.809923] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [285.810201] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [285.810452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [285.810703] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [285.811000] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [285.811336] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [285.811665] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [285.812009] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [285.812340] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [285.812670] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [285.813014] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [285.813348] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [285.813681] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [285.814037] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [285.814369] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [285.814702] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [285.815692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [285.816150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [285.816422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [285.816689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [285.816981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [285.817312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [285.817649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [285.817953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [285.818262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [285.818532] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [285.818798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [285.819086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [285.819364] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [285.819621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [285.819898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [285.820202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [285.820527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [285.820792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [285.821094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [285.821362] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [285.821610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [285.821858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [285.822130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [285.822406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [285.822665] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [285.822987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [285.823343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [285.823617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [285.823895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [285.824212] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [285.824595] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [285.824992] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [285.825491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [285.825850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [285.826136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [285.826448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [285.826935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [285.827326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [285.827712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [285.828122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [285.828977] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [285.830449] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [285.830742] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [285.831015] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [285.831381] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [285.833103] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [285.833749] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [285.834250] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [285.834630] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [285.835033] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [285.835296] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [285.835541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [285.835785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [285.836185] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [285.836559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [285.836948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [285.837324] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [285.837695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [285.837979] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [285.838264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [285.838522] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [285.838916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [285.839291] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [285.839664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <6> [285.840086] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [285.843705] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [285.847434] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [285.847911] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT) <7> [285.848345] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A] <7> [285.853857] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [285.854318] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [285.854703] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [285.855105] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [285.855592] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [285.855990] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [285.856372] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [285.856756] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [285.857161] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [285.857549] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [285.858090] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0 <7> [285.858514] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [285.858889] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [285.859257] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [285.859625] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [285.860011] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [285.860425] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [285.861090] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [285.861496] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [285.861935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [285.871944] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [285.872270] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [285.872515] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.081488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.083802] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.087333] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.093587] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.116157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.116217] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.116256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.116832] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.118989] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.120803] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static <7> [286.123202] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control <7> [286.125198] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.128126] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.132206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.135831] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.138114] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.140031] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.141532] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.145633] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.147528] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B] <7> [286.153710] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.155169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B] <7> [286.156466] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.160893] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.163093] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C] <7> [286.167411] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.168829] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C] <7> [286.170021] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.174471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled <7> [286.177104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled <7> [286.179686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled <7> [286.181273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [286.182907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [286.184579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [286.186270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B <7> [286.188176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B <7> [286.190379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B <7> [286.192492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C <7> [286.194359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C <7> [286.195675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C <7> [286.196633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.198014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.199211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A <7> [286.200381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B <7> [286.201577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C <7> [286.202557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.203507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A <7> [286.204347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B <7> [286.205185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C <7> [286.206127] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.207040] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.207643] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.208528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.209680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled <7> [286.210700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled <7> [286.211721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled <7> [286.212566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled <7> [286.213198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled <7> [286.213641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [286.214088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [286.214602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [286.215053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz <7> [286.215558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz <7> [286.216037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz <7> [286.216576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz <7> [286.217121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz <7> [286.217758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz <7> [286.218444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz <7> [286.219100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz <7> [286.219738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz <7> [286.220313] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.220865] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.221253] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.221754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state] <7> [286.222137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state] <7> [286.222556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state] <7> [286.222933] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.223422] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.223790] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.224137] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.224654] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.227960] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.228321] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.228652] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.251990] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.252260] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.252466] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.252670] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.253007] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8 <7> [286.253439] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108 <7> [286.254007] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208 <7> [286.254435] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308 <7> [286.254879] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8 <7> [286.255306] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8 <7> [286.255735] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108 <7> [286.256179] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208 <7> [286.256607] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308 <7> [286.257090] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8 <7> [286.257500] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8 <7> [286.257924] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108 <7> [286.258334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208 <7> [286.258742] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308 <7> [286.259164] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8 <7> [286.259918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset] <7> [286.260336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset] <7> [286.260752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset] <7> [286.261520] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [286.262458] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B] <7> [286.263162] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C] <7> [286.263856] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.271189] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs <7> [286.273555] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered <7> [286.274120] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [286.275165] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [286.278652] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event <7> [286.278785] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs <7> [286.280046] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [286.282039] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event <7> [286.282168] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs <7> [286.283335] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event <7> [286.283592] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs <7> [286.285417] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [286.288280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event <7> [286.288539] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs <7> [286.290324] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event <6> [286.290453] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [286.296034] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [286.329843] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [286.339053] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [286.341302] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [286.346501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.347360] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping <7> [286.347775] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping <7> [286.348230] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping <7> [286.348642] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [286.350241] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [286.351663] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [286.353210] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.353656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.354742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.355161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.355729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.356187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.356198] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.356588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.359989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.360003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.360477] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.360913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [286.365452] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.365917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.366586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.367041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.367618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.368089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.368100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.368497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.371871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.371884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.372325] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.373440] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [286.373800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [286.373816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [286.374515] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.374937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.375331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.377769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.377785] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.377793] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.377867] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [286.378321] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.378730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.380653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected <7> [286.380691] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [286.381116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [286.381127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.381139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.381152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.381163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.385766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [286.385789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [286.385801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.388881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.389338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.390020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.390494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.390507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.390959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.394333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.394346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.394787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [286.394803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [286.394815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [286.399919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [286.399940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [286.399952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.400669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.401100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.401682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.402147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.402158] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.402550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.409315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.409332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.409812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [286.409864] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [286.409875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [286.409883] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [286.409890] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [286.409898] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [286.409953] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [286.409988] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [286.409997] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [286.410020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [286.410113] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [286.410153] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [286.416604] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [286.418374] fbcon: i915drmfb (fb0) is primary device <6> [286.423984] Console: switching to colour frame buffer device 200x56 <6> [286.424004] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [286.424220] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [286.424241] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [286.424019] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [286.424452] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [286.424888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [286.425175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [286.425200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [286.425300] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [286.425748] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [286.426050] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.426190] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [286.426503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.426651] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [286.426965] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.427139] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [286.427573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [286.427963] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.427976] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.427993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.427997] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [286.428054] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [286.428464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [286.428504] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.428963] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [286.429124] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.429397] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [286.429817] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [286.430243] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [286.430637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [286.431076] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [286.431503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [286.431525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.431537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.431550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.431488] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [286.431561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.432013] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [286.432401] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [286.432755] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [286.433194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [286.436184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [286.436204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [286.436216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.438165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.438617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.439259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.439733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.439745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.440152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.445859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.445874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.446354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [286.446372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [286.446384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [286.449277] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [286.449740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [286.450212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [286.450655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [286.451839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [286.452294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.453122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [286.453142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [286.453129] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [286.453154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.453473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [286.453812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [286.453849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.454161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [286.454243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.454500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [286.454845] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [286.454870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.455320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.455182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [286.455331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.455520] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [286.455701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.455886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [286.456227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [286.456565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [286.456914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [286.457252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [286.457589] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [286.457937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [286.458276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [286.458616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [286.458968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [286.459306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [286.459642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [286.459997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [286.460343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.460323] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [286.460357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.460781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [286.460795] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [286.460805] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [286.460649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [286.460813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [286.460849] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [286.460857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [286.460997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [286.461326] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [286.461643] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [286.461693] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [286.461703] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [286.461780] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [286.461656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [286.462002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [286.462338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [286.462675] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [286.463019] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [286.463352] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [286.463356] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [286.463684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [286.463828] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [286.464022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [286.464222] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [286.464358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [286.464635] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [286.464696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [286.465043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [286.465058] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [286.465381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [286.465450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [286.465720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [286.465863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [286.466065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [286.466273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [286.466402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [286.466687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [286.466738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [286.467088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [286.467120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [286.467411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [286.467523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [286.467737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [286.467934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [286.468069] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [286.468328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [286.468397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [286.468723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [286.468740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [286.469056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [286.469152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [286.469382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [286.469557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [286.469709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [286.469969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [286.470042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [286.470371] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [286.470371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [286.470698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [286.470775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [286.471041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [286.471184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [286.471366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [286.471589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [286.471692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [286.472028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [286.472000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [286.472356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [286.472401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [286.472682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [286.472807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [286.473015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [286.473218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [286.473341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [286.473627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [286.473667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [286.474000] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [286.474004] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [286.474007] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [286.474038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [286.474441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [286.474850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [286.475250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [286.475645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [286.476053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [286.476455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [286.476868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [286.477300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [286.477719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [286.478148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [286.478552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [286.478979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [286.479401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [286.479813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state <7> [286.480235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [286.480647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [286.481073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [286.481464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [286.481877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [286.482270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [286.482676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [286.483093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [286.483500] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [286.486012] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [286.486461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [286.486876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [286.487261] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [286.487636] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [286.487989] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [286.488322] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [286.489160] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [286.489582] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [286.490129] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [286.490475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [286.490837] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [286.491184] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [286.491533] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [286.491896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [286.492241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [286.492581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [286.492931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [286.493267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [286.493612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [286.493971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [286.494318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [286.494668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [286.495026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [286.495375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [286.495720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [286.496070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [286.496419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [286.496767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [286.497117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [286.497464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [286.497826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [286.498175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [286.498527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [286.498886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [286.499229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [286.499573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [286.499925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [286.500269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.500618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.500975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [286.501328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.501677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [286.502035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [286.502390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [286.502737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [286.503087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [286.503435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [286.503786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [286.504142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [286.504490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [286.504847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [286.505186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.505519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.505872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [286.506224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [286.506577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [286.506939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [286.507295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [286.507646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [286.508003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [286.508352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [286.510526] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [286.515567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [286.516018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [286.516354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [286.516688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [286.517075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [286.517425] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [286.517772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [286.518164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [286.518520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [286.520292] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [286.520694] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [286.521704] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [286.522205] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.522595] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <6> [286.523809] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [286.533995] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.534298] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [286.534557] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [286.743176] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.745026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.749911] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [286.757225] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.758488] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [286.761879] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [286.763674] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [286.765398] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [286.769095] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [286.770338] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [286.771410] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [286.776603] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [286.777989] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [286.779481] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [286.784929] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [286.786857] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [286.790165] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [286.794356] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [286.796029] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [286.798425] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [286.803545] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 433 us, max time under evasion is 250 us <7> [286.811231] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [286.821164] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [286.823084] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [286.828844] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [286.838140] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [286.839503] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [286.839640] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [286.839679] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [286.840296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [286.840356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [286.840413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.853715] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [286.858681] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.860446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.862142] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.868819] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [286.875263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.875294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.875313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.875384] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [286.876250] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.876981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.883707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [286.883735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.883757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.883828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.883851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.890952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [286.890982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [286.891001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.892117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.892690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.893328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.893669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.893680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.894104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.897665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.897680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.898185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [286.898204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [286.898218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [286.902745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [286.902766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [286.902779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.903532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.903917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.904480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.905393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.905406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.905974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.909680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.909697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.910402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [286.910419] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes <7> [286.910430] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no <7> [286.910439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no <7> [286.910448] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no <7> [286.910456] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no <7> [286.910503] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [286.910534] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800 <7> [286.910541] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [286.911240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0) <7> [286.911740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [286.911754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [286.912577] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [286.912819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.913203] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.913546] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.914171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.914184] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.914192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.914227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [286.914591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.914956] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.917006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [286.917017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.917025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.917134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.917142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.918830] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.919176] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.919462] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [286.919744] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.920043] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.920403] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [286.920723] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.921031] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.921381] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [286.921548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [286.921672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [286.921695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.923448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.923905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.924438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.924905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.924918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.925403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.928727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.928742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.929299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [286.929432] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [286.929443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [286.933937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [286.934073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [286.934085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.934717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.935146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.935667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.936096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.936107] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.936429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.939790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.939805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.940211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [286.947226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.947244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [286.951764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <6> [286.952104] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [286.952700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [286.952713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [286.953659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.954067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.954602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.955534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.955546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.956162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <6> [286.958842] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [286.959743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.959757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.960459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [286.961648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [286.961663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <6> [286.962876] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [286.966403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [286.968270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [286.968284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [286.968829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.969074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.970104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.970967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.970980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.971347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.980884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.980902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.981405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [286.990642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] <7> [286.990661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1] <7> [286.991384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.991755] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.992149] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.992789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.992802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor <7> [286.992810] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0 <7> [286.992846] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no <7> [286.993199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.993500] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.995414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes: <7> [286.995427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.995438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.995484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] <7> [286.995494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [287.000397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected <7> [287.000453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] <7> [287.000473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [287.002981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.003357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.004581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.005177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.005189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.005576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.011352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.011367] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.014085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected <7> [287.014138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] <7> [287.014150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [287.018651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected <7> [287.018705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] <7> [287.018716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [287.021169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.021553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.022307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.022693] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.022721] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.024064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.027762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.027791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.028261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected <7> [287.031636] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139] <7> [288.071327] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A] <7> [288.071928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [288.073025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [288.074075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [288.074385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [288.074631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [288.074895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [288.075203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [288.075457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.075714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [288.076037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.076335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.076639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.076917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.077221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.077461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.077722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.078032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.078272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [288.078511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.078780] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.079084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [288.079442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.079710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.080079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.080461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.080784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.081162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.081504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.081793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.082168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [288.082548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.082947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [288.083324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [288.083702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [288.084085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [288.084465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [288.084841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [288.085217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [288.085479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [288.085745] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [288.086006] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [288.086290] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [288.086548] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [288.086814] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [288.087090] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [288.087320] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.087561] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.087849] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.088178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [288.088434] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [288.088718] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.088965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [288.089192] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [288.089423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [288.089651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [288.089924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [288.090268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [288.090742] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [288.092166] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [288.158394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.295035] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [288.296722] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [288.313012] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [288.313831] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [288.314637] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [288.316840] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [288.318140] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [288.369961] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.370936] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [288.371810] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.373503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.375198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [288.378170] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [288.378535] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [288.379509] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [288.380223] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [288.381585] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [288.384529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [288.385986] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [288.387249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [288.388391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [288.389235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [288.390357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [288.391246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [288.392305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [288.393191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [288.394259] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [288.396178] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [288.398919] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B] <7> [288.400266] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C] <7> [288.503449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [288.505235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [288.506252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [288.508383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [288.513785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [288.531756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [288.616910] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [288.618063] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [288.619080] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [288.620593] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [288.622973] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A] <7> [288.624469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [288.625974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [288.627455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [288.628755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [288.629758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [288.631023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [288.632132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [288.633228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [288.634251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [288.635290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [288.636283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [288.637357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [288.638565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [288.639636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [288.640981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [288.642498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [288.644022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [288.645457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [288.646976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [288.648335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [288.649448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [288.650741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [288.651775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [288.653072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [288.654081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [288.655284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [288.656275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [288.657705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [288.659162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [288.660716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [288.662223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [288.663761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [288.665288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [288.666797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [288.668332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [288.669918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [288.671416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [288.672936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [288.674498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [288.676099] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [288.678019] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [288.679532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [288.681060] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [288.682559] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [288.684064] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [288.685552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [288.687068] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [288.688957] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [288.690771] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [288.692322] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.693869] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [288.695360] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [288.696871] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0 <7> [288.698416] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0 <7> [288.699997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset] <7> [288.701512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [288.703068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [288.704566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [288.706076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [288.707575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [288.709118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [288.710330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [288.711346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [288.712300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [288.713223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [288.714048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [288.714795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [288.715383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [288.716027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [288.716824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [288.717595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [288.718325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [288.719016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [288.719446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [288.719916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [288.720452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [288.720941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [288.721473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [288.721949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.722620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [288.723143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [288.723731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [288.724164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [288.724596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [288.725087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [288.725639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [288.726124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [288.726677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [288.727106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [288.727599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [288.728046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [288.728416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [288.728928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [288.729459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [288.730010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [288.730538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [288.731096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [288.731598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [288.731996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [288.732519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [288.733082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [288.733615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [288.746736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [288.754652] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [288.754918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [288.755311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [288.755891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [288.756505] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [288.757230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [288.757458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [288.757689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [288.758006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [288.758237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [288.758441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [288.758659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [288.758881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [288.759085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [288.759589] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A] <7> [288.759876] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [288.760272] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on <7> [288.760584] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (115 ms remaining) <7> [288.878960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [288.929603] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.930818] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on <7> [288.931815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [288.980451] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.981706] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [288.982915] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.983774] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.139792] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.141078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.142524] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.145407] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on <7> [289.146993] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [289.154070] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.155288] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [289.160106] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [289.161439] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.162756] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [289.166046] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK <7> [289.167370] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [289.168675] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [289.172365] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [289.173701] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [289.175068] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [289.178790] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [289.180126] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [289.182488] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [289.185448] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [289.186744] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [289.188664] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37 <7> [289.192914] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 335 us, max time under evasion is 250 us <7> [289.201357] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [289.207354] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [289.208597] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [289.212406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1] <7> [289.213186] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.217896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1] <7> [289.218655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.219283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.220983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.221466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.221478] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.221826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.225559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.225576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.226299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2] <7> [289.231136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2] <7> [289.231998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.232422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.233239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.233709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.233722] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.234038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.237528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.237545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.322176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.322975] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.336783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.362320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.362772] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.375755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.437399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.440234] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.449617] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.450021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.450366] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.450755] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.451214] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.451552] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.451953] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.452372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.452804] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.453963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.558627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.562791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.563945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.565618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [289.575478] Console: switching to colour dummy device 80x25 <7> [289.578244] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed <7> [289.578750] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [289.580154] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [289.581515] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.582866] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.584217] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [289.590536] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [289.601735] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [289.606343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [289.607710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [289.609064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [289.610401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [289.611650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [289.612926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [289.614225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [289.615421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.616671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [289.617974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.619453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.620839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.622096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.623263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.624190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.625225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.626162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.627038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [289.627979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.628570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [289.629168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [289.629840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [289.630379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [289.631110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [289.631862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [289.632454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [289.633045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [289.633685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [289.634225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [289.634815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [289.635392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [289.635984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [289.636558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [289.637170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [289.637623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [289.638148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [289.638644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [289.639087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [289.639491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [289.639939] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset <7> [289.640380] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0 <7> [289.640958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [289.641419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [289.642148] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [289.642840] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.643260] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [289.643700] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [289.644193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset] <7> [289.644643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [289.645109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [289.645510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [289.646759] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [289.854831] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0 <7> [289.857016] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [289.872109] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off <7> [289.872485] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [289.873516] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short <7> [289.873688] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time <7> [289.875162] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [289.926224] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.926818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.927517] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long <7> [289.928768] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.928723] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.929884] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A] <7> [289.930641] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A] <7> [289.932321] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [289.934279] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.937009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A] <7> [289.939409] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B] <7> [289.940646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A] <7> [289.942013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B] <7> [289.943229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C] <7> [289.944711] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C] <7> [289.946514] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A] <7> [289.948253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B] <7> [289.950005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C] <7> [289.951746] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1] <7> [289.955258] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A] <7> [290.051884] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [290.091483] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs <7> [290.097339] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs <7> [290.102055] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs <7> [290.113068] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs <7> [290.117024] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs <7> [290.147556] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (281 ms remaining) <7> [290.431133] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [290.441688] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [291.090882] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [291.093356] [IGT] i915_pm_rpm: exiting, ret=0

<6> [276.012421] Console: switching to colour dummy device 80x25

<7> [276.017336] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [276.018314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [276.018329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [276.019079] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.019465] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.019871] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.020277] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.020289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [276.020297] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [276.020333] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [276.020687] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.021048] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.023144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [276.023157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.023169] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.023309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [276.023319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [276.027857] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [276.028001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [276.028013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [276.031018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.031326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.031804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.032233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.032245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.032581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.035860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.035873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.036265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [276.036400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [276.036412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [276.040895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [276.040987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [276.040995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [276.041509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.041820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.042284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.042535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.042542] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.042782] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.045870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.045878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.046136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [276.052677] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [276.052688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [276.057074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [276.057751] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [276.057764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [276.058321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.058555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.058991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.059306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.059315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.059532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.062628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.062639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.062963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [276.063616] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [276.063625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [276.067978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [276.068622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [276.068631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [276.069166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.069382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.069791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.070045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.070052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.070276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.073260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.073267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.073501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [276.074015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [276.074027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [276.074284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.074496] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.074718] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.074977] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.074984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [276.074989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [276.075026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [276.075245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.075453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.076994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [276.077004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.077011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.077045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [276.077053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [276.081407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [276.081440] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [276.081447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [276.081970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.082180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.082567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.082848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.082859] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.083078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.086072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.086081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.086322] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [276.086353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [276.086360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [276.090674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [276.090767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [276.090778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [276.091407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.091771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.092491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.092913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.092922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.093250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.096427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.096437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.096847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [276.097595] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:140]

<7> [276.408265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.143308] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [277.143952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [277.145010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [277.146000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [277.147164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [277.148158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [277.149285] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [277.150280] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [277.151330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.152376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [277.153783] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.154842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.156272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.157291] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.158823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.160350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.161850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.163365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.164764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.166303] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.167813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.169248] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [277.170731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.172253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.173677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.174626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.175546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.176474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.177261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.178166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.178966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.179661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.180332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [277.181033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [277.181732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [277.182369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [277.182956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [277.183501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [277.183895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [277.184320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [277.184696] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [277.185117] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [277.185533] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [277.185929] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [277.186327] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [277.186791] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [277.187175] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.187523] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.187912] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.188431] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [277.188811] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [277.189198] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [277.189478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [277.189776] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [277.190138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [277.190498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [277.190859] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [277.191205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [277.191734] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [277.193618] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [277.399991] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [277.401858] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [277.421905] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [277.422424] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [277.422989] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [277.423782] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [277.424436] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [277.476086] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [277.476489] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [277.477375] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [277.478452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [277.478629] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [277.484831] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [277.486338] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [277.487640] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [277.489823] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [277.491445] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [277.495074] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [277.496806] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [277.498384] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [277.499850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [277.501307] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [277.502836] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [277.504309] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [277.505817] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [277.507141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [277.508693] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [277.511546] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [277.515443] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [277.516992] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [277.616252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [277.618310] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [277.619389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [277.621335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [277.625843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [277.653168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [277.733522] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [277.734714] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [277.736181] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [277.737806] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [277.739394] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [277.740803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [277.742451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [277.744075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [277.745844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [277.747630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [277.749384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [277.750937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [277.752491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [277.754146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [277.755672] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [277.757126] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [277.758677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [277.760269] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [277.761642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [277.763034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [277.764393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [277.765787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [277.767145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [277.768479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [277.769839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [277.771162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [277.772511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [277.773868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [277.775192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [277.776590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [277.777949] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [277.779300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [277.780637] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [277.781979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [277.783321] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [277.784676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [277.786028] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [277.787414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [277.788765] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [277.790113] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [277.791476] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [277.792873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [277.794237] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [277.795602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [277.796948] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [277.798679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [277.800062] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [277.801382] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [277.802670] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [277.803964] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [277.805263] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [277.806534] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [277.808478] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [277.810008] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [277.811183] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [277.812214] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [277.813253] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [277.814299] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [277.815171] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [277.816305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [277.817243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [277.818299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [277.819166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [277.820427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [277.821431] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [277.822489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [277.823353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [277.824385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [277.825256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [277.826283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [277.827149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [277.828244] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [277.829215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [277.830458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [277.831422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [277.832340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [277.833260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [277.834321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [277.835214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [277.836253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [277.837145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [277.838192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [277.839151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [277.840279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [277.841225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [277.842288] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [277.842893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [277.843595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [277.844138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [277.844721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [277.845393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [277.845969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [277.846726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [277.847448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [277.848105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [277.848827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [277.849363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [277.849941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.850688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.851226] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [277.851689] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [277.852191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [277.852630] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [277.853142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [277.853619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [277.854062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [277.854465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [277.866612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [277.876864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [277.877141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [277.877683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [277.878905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [277.879770] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [277.880923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [277.881302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [277.881689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [277.882050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [277.882394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [277.882769] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [277.883126] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [277.883481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [277.883858] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [277.884481] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [277.884878] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [277.885523] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [277.886090] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (92 ms remaining)

<7> [277.983956] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [278.034263] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.035409] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [278.036480] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [278.085071] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.086008] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [278.086899] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.087788] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [278.235615] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.237252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [278.238757] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.241233] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [278.242393] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [278.248393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [278.249668] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [278.252149] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [278.253210] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.254224] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [278.258266] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [278.259790] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [278.261262] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [278.265585] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [278.266479] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [278.267435] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [278.271640] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [278.273129] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [278.276115] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [278.279548] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [278.281023] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [278.283168] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [278.295234] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [278.303486] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [278.304885] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [278.311018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [278.311740] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [278.317019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<6> [278.317900] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [278.319032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.320461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [278.322058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.323618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.323659] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.325164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [278.331197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.331243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [278.332910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [278.338216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [278.339617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.340534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [278.342026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.342845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.342864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.343612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [278.349105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.349130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [278.443206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.443988] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [278.456664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [278.482085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.482459] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [278.494660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [278.527538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.529033] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [278.540097] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [278.540594] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [278.541017] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [278.541424] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [278.545291] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [278.545737] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [278.546147] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [278.548511] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [278.548894] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [278.550339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [278.647816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [278.648900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [278.649603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [278.650271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [278.652758] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [278.652920] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [278.653613] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [278.654278] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.655076] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.655922] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [278.660904] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [278.678866] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [278.689602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [278.690169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [278.690786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [278.691407] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [278.691986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [278.692779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [278.693284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [278.694011] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [278.694782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [278.695630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [278.696439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [278.697288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [278.698094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [278.698969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [278.699789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [278.700638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [278.701436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [278.702364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [278.703208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [278.704056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [278.704867] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [278.705696] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [278.706522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [278.707332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [278.708206] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [278.709043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [278.709900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [278.710726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [278.711574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [278.712372] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [278.713218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [278.714033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [278.714882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [278.715690] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [278.716541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [278.717334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [278.718186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [278.719002] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [278.719849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [278.720672] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [278.721526] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [278.722504] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [278.723398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [278.724426] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [278.725258] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [278.726086] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [278.726890] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [278.727725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [278.728532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [278.729335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [278.730140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [278.733064] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [278.935973] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [278.938375] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [278.948758] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [278.949080] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [278.950896] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [278.951084] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [278.952827] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [279.003091] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [279.003575] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [279.004161] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [279.005149] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [279.006188] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [279.007681] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [279.011273] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [279.013309] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [279.014480] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [279.017755] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [279.019489] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [279.020957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [279.022472] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [279.023993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [279.025305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [279.027116] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [279.030146] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [279.031625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [279.032729] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [279.034895] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [279.091404] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [279.141371] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [279.165246] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [279.168368] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [279.187152] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [279.191684] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [279.215623] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (289 ms remaining)

<7> [279.511728] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [279.543628] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [280.198724] [IGT] Reloading i915 w/o display

<5> [281.134349] Setting dangerous option force_probe - tainting kernel

<6> [281.146555] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [281.148085] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [281.148505] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [281.148758] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [281.149018] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [281.149334] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [281.149732] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [281.149967] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [281.150933] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [281.151173] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [281.151398] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [281.151603] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [281.151613] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [281.152342] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [281.152399] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [281.152659] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [281.152895] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e8fff], io: n/a

<7> [281.153089] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [281.153807] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [281.154136] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [281.154414] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [281.154725] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [281.154977] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [281.163312] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [281.163594] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [281.163846] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [281.164098] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [281.164465] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.164792] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.165112] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [281.165448] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.165767] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.166088] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [281.166353] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [281.166560] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [281.166751] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [281.167009] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [281.167349] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [281.167671] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [281.168885] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [281.169192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [281.169498] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [281.169908] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [281.170326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [281.170733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [281.171156] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [281.171537] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [281.171813] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [281.172084] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [281.172372] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [281.172647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [281.172896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [281.173144] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [281.173424] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [281.173704] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.173964] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.174229] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [281.174566] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.174843] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [281.175110] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.175378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [281.175647] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.175895] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [281.176154] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [281.176452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.176793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.177065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [281.177448] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.177728] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [281.177997] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [281.178257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.178630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.178886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.179138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.179473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.179833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.180145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.180431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.180761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.181632] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [281.182773] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [281.183063] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [281.183391] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [281.183778] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [281.183971] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [281.184722] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [281.185413] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [281.185512] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [281.185895] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [281.186164] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [281.186436] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [281.186729] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [281.186983] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [281.187236] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [281.187503] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [281.187793] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [281.188047] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [281.188316] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [281.188605] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [281.188859] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [281.189124] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [281.189396] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [281.189678] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [281.189924] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [281.193298] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [281.196982] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.197470] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [281.197910] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [281.206300] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [281.206762] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [281.207174] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [281.207613] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [281.208037] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [281.208478] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [281.208886] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [281.209314] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [281.209725] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [281.210138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [281.210697] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [281.211165] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [281.211579] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [281.211971] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [281.212368] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [281.212762] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [281.213201] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [281.213928] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [281.214366] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [281.214801] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [281.224272] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.224737] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [281.225140] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [281.436588] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [281.437520] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [281.439170] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [281.442428] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [281.452336] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [281.452353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [281.452362] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [281.452498] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.452929] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.453359] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [281.453983] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [281.454380] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [281.454900] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [281.455277] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [281.455664] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [281.455984] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [281.456346] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [281.456791] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [281.457615] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [281.458002] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [281.459270] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [281.459593] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [281.459871] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [281.460545] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [281.460868] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [281.461747] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [281.462079] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [281.462400] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [281.463359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [281.463804] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [281.464258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [281.464604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [281.464960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [281.465411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [281.465769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [281.466098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [281.466426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [281.466731] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [281.467025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [281.467387] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [281.467687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [281.467999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [281.468343] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [281.468650] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [281.468922] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [281.469220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [281.469530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [281.469815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [281.470081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [281.470421] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [281.470727] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [281.471105] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [281.471452] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [281.472019] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [281.472548] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [281.473042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [281.473565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [281.473919] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [281.474189] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [281.474500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [281.474908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [281.475328] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [281.475738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [281.476155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [281.476450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [281.476746] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [281.477037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [281.477451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [281.477845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [281.478277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [281.478688] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.478962] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.479247] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [281.479798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [281.480204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [281.480643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [281.481062] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [281.481474] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [281.481713] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [281.481999] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [281.482414] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [281.484836] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [281.485119] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [281.485423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [281.506657] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [281.506910] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [281.507127] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [281.507470] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [281.507807] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [281.508245] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [281.508653] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [281.509064] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [281.509377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [281.509702] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [281.509978] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [281.510399] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [281.510808] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [281.511228] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [281.511624] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [281.511990] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [281.512255] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [281.512543] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [281.512893] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [281.513628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [281.514016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [281.514418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [281.514993] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [281.515669] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [281.516089] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [281.516592] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [281.522698] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [281.524193] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [281.524695] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [281.525754] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [281.528060] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [281.528208] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [281.529776] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [281.532600] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [281.532747] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [281.536712] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [281.536847] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [281.540683] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [281.544757] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [281.544921] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [281.547726] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [281.547817] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [281.553941] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [281.593294] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [281.603346] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [281.606281] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [281.611399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.611861] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [281.612680] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [281.613101] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [281.613533] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [281.613936] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [281.614368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.614763] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [281.615166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.615606] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [281.616033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.616443] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [281.616855] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [281.620590] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.623842] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [281.624005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [281.624020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [281.624492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to disconnected

<7> [281.624513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [281.624622] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:106:eDP-1] EDID changed, epoch counter 2

<7> [281.624652] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [281.624663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.625074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [281.625087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [281.625098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.625535] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [281.625631] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [281.626004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [281.626022] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.626441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [281.626615] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [281.626628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.627037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [281.627077] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [281.627086] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [281.627095] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [281.627102] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [281.627110] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [281.627118] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [281.627174] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [281.627194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [281.630091] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [281.630109] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [281.633536] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [281.634026] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [281.634485] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [281.634903] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [281.635348] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [281.635767] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [281.636194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [281.636655] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [281.637085] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [281.637540] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [281.637967] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [281.638415] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [281.638826] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [281.639267] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [281.639679] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [281.640082] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [281.640546] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [281.640976] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [281.641425] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [281.641842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [281.642297] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [281.642714] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [281.643342] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [281.643482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [281.643497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [281.643904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] disconnected

<7> [281.643920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [281.643931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [281.644349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [281.644363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [281.644375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [281.644769] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [281.644783] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [281.644795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [281.645191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [281.645204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [281.645229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [281.645633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [281.645646] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [281.645656] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? no

<7> [281.645665] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [281.645674] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [281.645683] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [281.645692] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [281.645757] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [281.645778] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [281.645886] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [281.645919] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [281.646096] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [281.647297] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [281.647742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [281.648187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [281.648630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [281.649057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [281.649511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [281.650850] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [281.651249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [281.651587] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [281.651927] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [281.652349] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [281.652678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [281.653010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [281.653367] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [281.653695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [281.654016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [281.654357] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [281.654681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [281.655007] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [281.655359] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [281.655681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [281.656005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [281.656350] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [281.656684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [281.657022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [281.657371] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [281.657708] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [281.658046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [281.658391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [281.658720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [281.659045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [281.659385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [281.659723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [281.660059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [281.660398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [281.660725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [281.661051] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [281.661390] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [281.661714] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [281.662041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [281.662385] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [281.662713] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [281.663040] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [281.663384] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [281.663705] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [281.664028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [281.664363] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [281.664683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [281.665007] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [281.665350] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [281.665678] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [281.666005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [281.666336] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [281.666658] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [281.666978] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [281.667318] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [281.667643] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [281.667962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [281.668284] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [281.668600] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [281.668918] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [281.669252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [281.669569] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [281.669893] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [281.670225] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [281.670543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [281.670855] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [281.671176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [281.671533] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [281.671537] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [281.671540] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [281.687094] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [281.688059] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [281.688692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.689805] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [281.691119] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [281.725373] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.726386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.726758] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [281.727114] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.727507] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.727859] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [281.730230] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [281.730578] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [281.730933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [281.758003] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [281.766690] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [281.768308] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [283.031241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [283.976939] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD off

<7> [283.977836] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [283.978693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [283.979916] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [283.980233] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.980485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.980486] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [283.980900] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [283.981246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.982366] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [283.982349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [283.990077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [284.118948] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [284.144206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [284.151181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [284.151529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.151790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [284.152037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [284.152101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.152406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [284.152877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.153016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [284.153556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.154041] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.166853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.167275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.167612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.167848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.168519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.280766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.281121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.281739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.282294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.284484] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.292033] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.292298] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.292517] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.292735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.293067] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.293379] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.293613] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.293853] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.294112] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.294828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.295666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.296084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.296453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.297241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.389957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.390897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.392466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.393652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.395162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.396076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.396891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.397948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.399293] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [284.446283] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [284.461358] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [284.471583] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [284.477635] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [284.485670] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [284.488916] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [284.514990] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [284.515312] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.525163] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [284.934845] [IGT] Reloading i915 as normal

<5> [285.780118] Setting dangerous option force_probe - tainting kernel

<6> [285.792732] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [285.794740] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [285.795161] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [285.795534] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [285.795933] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [285.796399] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [285.796969] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [285.797203] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [285.798326] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [285.798667] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [285.799044] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [285.799371] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [285.799385] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [285.800172] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [285.800212] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [285.800464] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [285.800700] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e8fff], io: n/a

<7> [285.800911] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [285.801624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [285.801950] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [285.802232] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [285.802475] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [285.802717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [285.809923] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [285.810201] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [285.810452] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [285.810703] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [285.811000] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [285.811336] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [285.811665] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [285.812009] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [285.812340] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [285.812670] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [285.813014] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [285.813348] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [285.813681] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [285.814037] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [285.814369] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [285.814702] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [285.815692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [285.816150] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [285.816422] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [285.816689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [285.816981] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [285.817312] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [285.817649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [285.817953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [285.818262] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [285.818532] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [285.818798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [285.819086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [285.819364] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [285.819621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [285.819898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [285.820202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [285.820527] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [285.820792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [285.821094] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [285.821362] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [285.821610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [285.821858] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [285.822130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [285.822406] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [285.822665] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [285.822987] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [285.823343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [285.823617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [285.823895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [285.824212] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [285.824595] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [285.824992] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [285.825491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [285.825850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [285.826136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [285.826448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [285.826935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [285.827326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [285.827712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [285.828122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [285.828977] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [285.830449] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [285.830742] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [285.831015] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [285.831381] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [285.833103] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [285.833749] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [285.834250] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [285.834630] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [285.835033] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [285.835296] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [285.835541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [285.835785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [285.836185] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [285.836559] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [285.836948] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [285.837324] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [285.837695] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [285.837979] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [285.838264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [285.838522] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [285.838916] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [285.839291] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [285.839664] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<6> [285.840086] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [285.843705] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [285.847434] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [285.847911] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:105:DDI A/PHY A] Using AUX CH A (VBT)

<7> [285.848345] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:105:DDI A/PHY A]

<7> [285.853857] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [285.854318] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [285.854703] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [285.855105] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [285.855592] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [285.855990] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [285.856372] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [285.856756] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [285.857161] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [285.857549] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [285.858090] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:105:DDI A/PHY A] initial power sequencer: PPS 0

<7> [285.858514] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [285.858889] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [285.859257] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [285.859625] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [285.860011] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [285.860425] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [285.861090] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [285.861496] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [285.861935] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [285.871944] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [285.872270] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [285.872515] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.081488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.083802] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.087333] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.093587] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.116157] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.116217] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.116256] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.116832] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.118989] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:106:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.120803] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:106:eDP-1] DRRS type: static

<7> [286.123202] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:106:eDP-1] Using native PCH PWM for backlight control

<7> [286.125198] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:106:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.128126] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.132206] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.135831] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.138114] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.140031] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.141532] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.145633] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:113:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.147528] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:113:DDI B/PHY B]

<7> [286.153710] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.155169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:113:DDI B/PHY B]

<7> [286.156466] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:113:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.160893] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:128:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.163093] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:128:DDI C/PHY C]

<7> [286.167411] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.168829] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:128:DDI C/PHY C]

<7> [286.170021] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:128:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.174471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] hw state readout: disabled

<7> [286.177104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] hw state readout: disabled

<7> [286.179686] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] hw state readout: disabled

<7> [286.181273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [286.182907] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [286.184579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [286.186270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] hw state readout: disabled, pipe B

<7> [286.188176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] hw state readout: disabled, pipe B

<7> [286.190379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] hw state readout: disabled, pipe B

<7> [286.192492] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] hw state readout: disabled, pipe C

<7> [286.194359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] hw state readout: disabled, pipe C

<7> [286.195675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] hw state readout: disabled, pipe C

<7> [286.196633] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.198014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:113:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.199211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DP-MST A] hw state readout: disabled, pipe A

<7> [286.200381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DP-MST B] hw state readout: disabled, pipe B

<7> [286.201577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST C] hw state readout: disabled, pipe C

<7> [286.202557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:128:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.203507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:130:DP-MST A] hw state readout: disabled, pipe A

<7> [286.204347] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DP-MST B] hw state readout: disabled, pipe B

<7> [286.205185] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:132:DP-MST C] hw state readout: disabled, pipe C

<7> [286.206127] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.207040] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.207643] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.208528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.209680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:eDP-1] hw state readout: disabled

<7> [286.210700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:114:DP-1] hw state readout: disabled

<7> [286.211721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:123:HDMI-A-1] hw state readout: disabled

<7> [286.212566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:129:DP-2] hw state readout: disabled

<7> [286.213198] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:135:HDMI-A-2] hw state readout: disabled

<7> [286.213641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [286.214088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [286.214602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [286.215053] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:56:pipe A] min_cdclk 0 kHz

<7> [286.215558] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:57:plane 1B] min_cdclk 0 kHz

<7> [286.216037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 2B] min_cdclk 0 kHz

<7> [286.216576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:75:cursor B] min_cdclk 0 kHz

<7> [286.217121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe B] min_cdclk 0 kHz

<7> [286.217758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 1C] min_cdclk 0 kHz

<7> [286.218444] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:90:plane 2C] min_cdclk 0 kHz

<7> [286.219100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:99:cursor C] min_cdclk 0 kHz

<7> [286.219738] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:104:pipe C] min_cdclk 0 kHz

<7> [286.220313] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:56:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.220865] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:80:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.221253] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:104:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.221754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [setup_hw_state]

<7> [286.222137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [setup_hw_state]

<7> [286.222556] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [setup_hw_state]

<7> [286.222933] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.223422] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.223790] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.224137] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.224654] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.227960] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.228321] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.228652] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.251990] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.252260] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.252466] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.252670] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.253007] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 0: start 0x8

<7> [286.253439] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 1: start 0x108

<7> [286.254007] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 2: start 0x208

<7> [286.254435] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 3: start 0x308

<7> [286.254879] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:56:pipe A] FQ 4: start 0x3c8

<7> [286.255306] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 0: start 0x8

<7> [286.255735] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 1: start 0x108

<7> [286.256179] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 2: start 0x208

<7> [286.256607] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 3: start 0x308

<7> [286.257090] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:80:pipe B] FQ 4: start 0x3c8

<7> [286.257500] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 0: start 0x8

<7> [286.257924] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 1: start 0x108

<7> [286.258334] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 2: start 0x208

<7> [286.258742] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 3: start 0x308

<7> [286.259164] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:104:pipe C] FQ 4: start 0x3c8

<7> [286.259918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [fastset]

<7> [286.260336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe B] enable: no [fastset]

<7> [286.260752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:104:pipe C] enable: no [fastset]

<7> [286.261520] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [286.262458] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe B]

<7> [286.263162] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:104:pipe C]

<7> [286.263856] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.271189] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:106:eDP-1] adding connector to sysfs

<7> [286.273555] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:106:eDP-1] backlight device intel_backlight registered

<7> [286.274120] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:106:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [286.275165] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [286.278652] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:eDP-1] generating connector hotplug event

<7> [286.278785] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:114:DP-1] adding connector to sysfs

<7> [286.280046] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [286.282039] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:114:DP-1] generating connector hotplug event

<7> [286.282168] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:123:HDMI-A-1] adding connector to sysfs

<7> [286.283335] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:123:HDMI-A-1] generating connector hotplug event

<7> [286.283592] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:129:DP-2] adding connector to sysfs

<7> [286.285417] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [286.288280] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:129:DP-2] generating connector hotplug event

<7> [286.288539] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:135:HDMI-A-2] adding connector to sysfs

<7> [286.290324] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:135:HDMI-A-2] generating connector hotplug event

<6> [286.290453] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [286.296034] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [286.329843] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [286.339053] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [286.341302] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [286.346501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.347360] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:56:pipe A] not active, skipping

<7> [286.347775] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:80:pipe B] not active, skipping

<7> [286.348230] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:104:pipe C] not active, skipping

<7> [286.348642] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [286.350241] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [286.351663] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [286.353210] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:114:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.353656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.354742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.355161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.355729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.356187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.356198] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.356588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.359989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.360003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.360477] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:123:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.360913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [286.365452] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:129:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.365917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.366586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.367041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.367618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.368089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.368100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.368497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.371871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.371884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.372325] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:135:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.373440] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [286.373800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [286.373816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [286.374515] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.374937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.375331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.377769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.377785] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.377793] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.377867] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [286.378321] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.378730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.380653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] status updated from unknown to connected

<7> [286.380691] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [286.381116] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [286.381127] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.381139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.381152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.381163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.385766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [286.385789] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [286.385801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.388881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.389338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.390020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.390494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.390507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.390959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.394333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.394346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.394787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [286.394803] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [286.394815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [286.399919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [286.399940] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [286.399952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.400669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.401100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.401682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.402147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.402158] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.402550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.409315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.409332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.409812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [286.409864] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [286.409875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [286.409883] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [286.409890] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [286.409898] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [286.409953] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [286.409988] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [286.409997] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [286.410020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [286.410113] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [286.410153] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [286.416604] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [286.418374] fbcon: i915drmfb (fb0) is primary device

<6> [286.423984] Console: switching to colour frame buffer device 200x56

<6> [286.424004] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [286.424220] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [286.424241] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [286.424019] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [286.424452] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [286.424888] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [286.425175] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [286.425200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [286.425300] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [286.425748] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [286.426050] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.426190] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [286.426503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.426651] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [286.426965] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.427139] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [286.427573] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [286.427963] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.427976] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.427993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.427997] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [286.428054] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [286.428464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [286.428504] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.428963] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [286.429124] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.429397] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [286.429817] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [286.430243] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [286.430637] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [286.431076] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [286.431503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [286.431525] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.431537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.431550] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.431488] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [286.431561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.432013] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [286.432401] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [286.432755] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [286.433194] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [286.436184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [286.436204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [286.436216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.438165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.438617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.439259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.439733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.439745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.440152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.445859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.445874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.446354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [286.446372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [286.446384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [286.449277] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [286.449740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [286.450212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [286.450655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [286.451839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [286.452294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.453122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [286.453142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [286.453129] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [286.453154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.453473] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [286.453812] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [286.453849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.454161] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [286.454243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.454500] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [286.454845] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [286.454870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.455320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.455182] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [286.455331] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.455520] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [286.455701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.455886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [286.456227] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [286.456565] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [286.456914] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [286.457252] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [286.457589] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [286.457937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [286.458276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [286.458616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [286.458968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [286.459306] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [286.459642] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [286.459997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [286.460343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.460323] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [286.460357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.460781] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [286.460795] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [286.460805] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [286.460649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [286.460813] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [286.460849] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [286.460857] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [286.460997] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [286.461326] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [286.461643] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [286.461693] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [286.461703] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [286.461780] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [286.461656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [286.462002] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [286.462338] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [286.462675] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [286.463019] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [286.463352] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [286.463356] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [286.463684] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [286.463828] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [286.464022] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [286.464222] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [286.464358] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [286.464635] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [286.464696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [286.465043] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [286.465058] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [286.465381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [286.465450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [286.465720] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [286.465863] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [286.466065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [286.466273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [286.466402] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [286.466687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [286.466738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [286.467088] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [286.467120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [286.467411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [286.467523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [286.467737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [286.467934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [286.468069] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [286.468328] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [286.468397] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [286.468723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [286.468740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [286.469056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [286.469152] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [286.469382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [286.469557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [286.469709] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [286.469969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [286.470042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [286.470371] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [286.470371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [286.470698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [286.470775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [286.471041] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [286.471184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [286.471366] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [286.471589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [286.471692] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [286.472028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [286.472000] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [286.472356] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [286.472401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [286.472682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [286.472807] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [286.473015] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [286.473218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [286.473341] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [286.473627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [286.473667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [286.474000] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [286.474004] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [286.474007] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [286.474038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [286.474441] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [286.474850] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [286.475250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [286.475645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [286.476053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [286.476455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [286.476868] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [286.477300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [286.477719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [286.478148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [286.478552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [286.478979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [286.479401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [286.479813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dpll_hw_state

<7> [286.480235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [286.480647] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [286.481073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [286.481464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [286.481877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [286.482270] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [286.482676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [286.483093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [286.483500] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [286.486012] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [286.486461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [286.486876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [286.487261] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [286.487636] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [286.487989] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [286.488322] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [286.489160] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [286.489582] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [286.490129] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [286.490475] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [286.490837] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [286.491184] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [286.491533] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [286.491896] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [286.492241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [286.492581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [286.492931] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [286.493267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [286.493612] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [286.493971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [286.494318] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [286.494668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [286.495026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [286.495375] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [286.495720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [286.496070] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [286.496419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [286.496767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [286.497117] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [286.497464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [286.497826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [286.498175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [286.498527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [286.498886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [286.499229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [286.499573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [286.499925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [286.500269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.500618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.500975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [286.501328] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.501677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [286.502035] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [286.502390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [286.502737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [286.503087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [286.503435] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [286.503786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [286.504142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [286.504490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [286.504847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [286.505186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.505519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.505872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [286.506224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [286.506577] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [286.506939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [286.507295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [286.507646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [286.508003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [286.508352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [286.510526] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [286.515567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [286.516018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [286.516354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [286.516688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [286.517075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [286.517425] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [286.517772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [286.518164] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [286.518520] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [286.520292] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [286.520694] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [286.521704] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [286.522205] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.522595] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<6> [286.523809] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [286.533995] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.534298] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [286.534557] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [286.743176] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.745026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.749911] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [286.757225] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.758488] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [286.761879] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [286.763674] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [286.765398] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [286.769095] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [286.770338] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [286.771410] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [286.776603] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [286.777989] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [286.779481] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [286.784929] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [286.786857] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [286.790165] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [286.794356] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [286.796029] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [286.798425] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [286.803545] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 433 us, max time under evasion is 250 us

<7> [286.811231] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [286.821164] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [286.823084] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [286.828844] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [286.838140] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [286.839503] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [286.839640] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [286.839679] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [286.840296] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [286.840356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [286.840413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.853715] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [286.858681] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.860446] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.862142] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.868819] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [286.875263] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.875294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.875313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.875384] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [286.876250] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.876981] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.883707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [286.883735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.883757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.883828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.883851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.890952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [286.890982] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [286.891001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.892117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.892690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.893328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.893669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.893680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.894104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.897665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.897680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.898185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [286.898204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [286.898218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [286.902745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [286.902766] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [286.902779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.903532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.903917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.904480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.905393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.905406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.905974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.909680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.909697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.910402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [286.910419] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] enabled? yes

<7> [286.910430] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:114:DP-1] enabled? no

<7> [286.910439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:123:HDMI-A-1] enabled? no

<7> [286.910448] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:129:DP-2] enabled? no

<7> [286.910456] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:135:HDMI-A-2] enabled? no

<7> [286.910503] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [286.910534] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:106:eDP-1] found preferred mode: 3200x1800

<7> [286.910541] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [286.911240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:56:pipe A] desired mode 3200x1800 set (0,0)

<7> [286.911740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [286.911754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [286.912577] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [286.912819] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.913203] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.913546] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.914171] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.914184] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.914192] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.914227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [286.914591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.914956] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.917006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [286.917017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.917025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.917134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.917142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.918830] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.919176] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.919462] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [286.919744] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.920043] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.920403] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [286.920723] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.921031] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.921381] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [286.921548] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [286.921672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [286.921695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.923448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.923905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.924438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.924905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.924918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.925403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.928727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.928742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.929299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [286.929432] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [286.929443] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [286.933937] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [286.934073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [286.934085] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.934717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.935146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.935667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.936096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.936107] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.936429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.939790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.939805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.940211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [286.947226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.947244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [286.951764] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<6> [286.952104] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [286.952700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [286.952713] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [286.953659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.954067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.954602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.955534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.955546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.956162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<6> [286.958842] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [286.959743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.959757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.960459] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [286.961648] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [286.961663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<6> [286.962876] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [286.966403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [286.968270] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [286.968284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [286.968829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.969074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.970104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.970967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.970980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.971347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.980884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.980902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.981405] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [286.990642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1]

<7> [286.990661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:106:eDP-1]

<7> [286.991384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.991755] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.992149] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.992789] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.992802] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD monitor

<7> [286.992810] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:106:eDP-1] ELD size 20, SAD count 0

<7> [286.992846] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] VRR capable: no

<7> [286.993199] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.993500] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:106:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.995414] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:106:eDP-1] probed modes:

<7> [286.995427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.995438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.995484] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1]

<7> [286.995494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [287.000397] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:114:DP-1] disconnected

<7> [287.000453] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1]

<7> [287.000473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [287.002981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.003357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.004581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.005177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.005189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.005576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.011352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.011367] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.014085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:123:HDMI-A-1] disconnected

<7> [287.014138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2]

<7> [287.014150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [287.018651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:129:DP-2] disconnected

<7> [287.018705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2]

<7> [287.018716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [287.021169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.021553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.022307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.022693] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.022721] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.024064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.027762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.027791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.028261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:135:HDMI-A-2] disconnected

<7> [287.031636] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:139]

<7> [288.071327] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:56:pipe A]

<7> [288.071928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [288.073025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [288.074075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [288.074385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [288.074631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [288.074895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [288.075203] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [288.075457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.075714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [288.076037] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.076335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.076639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.076917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.077221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.077461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.077722] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.078032] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.078272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.078511] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.078780] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.079084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [288.079442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.079710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.080079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.080461] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.080784] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.081162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.081504] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.081793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.082168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.082548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.082947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [288.083324] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [288.083702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [288.084085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [288.084465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [288.084841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [288.085217] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [288.085479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [288.085745] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [288.086006] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [288.086290] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [288.086548] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [288.086814] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [288.087090] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [288.087320] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.087561] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.087849] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.088178] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [288.088434] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [288.088718] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.088965] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [288.089192] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [288.089423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [288.089651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [288.089924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [288.090268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [288.090742] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [288.092166] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [288.158394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.295035] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [288.296722] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [288.313012] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [288.313831] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [288.314637] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [288.316840] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [288.318140] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [288.369961] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.370936] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [288.371810] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.373503] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.375198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [288.378170] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [288.378535] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [288.379509] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [288.380223] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [288.381585] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [288.384529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [288.385986] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [288.387249] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [288.388391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [288.389235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [288.390357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [288.391246] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [288.392305] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [288.393191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [288.394259] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [288.396178] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [288.398919] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:80:pipe B]

<7> [288.400266] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:104:pipe C]

<7> [288.503449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [288.505235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [288.506252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [288.508383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [288.513785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [288.531756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [288.616910] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:106:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [288.618063] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:105:DDI A/PHY A][CRTC:56:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [288.619080] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [288.620593] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [288.622973] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:105:DDI A/PHY A] [CRTC:56:pipe A]

<7> [288.624469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [288.625974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [288.627455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [288.628755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [288.629758] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [288.631023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [288.632132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [288.633228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [288.634251] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [288.635290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [288.636283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [288.637357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [288.638565] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [288.639636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [288.640981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [288.642498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [288.644022] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [288.645457] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [288.646976] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [288.648335] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [288.649448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [288.650741] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [288.651775] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [288.653072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [288.654081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [288.655284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [288.656275] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [288.657705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [288.659162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [288.660716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [288.662223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [288.663761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [288.665288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [288.666797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [288.668332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [288.669918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [288.671416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [288.672936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [288.674498] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [288.676099] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [288.678019] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [288.679532] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [288.681060] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [288.682559] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [288.684064] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [288.685552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [288.687068] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [288.688957] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [288.690771] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [288.692322] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.693869] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [288.695360] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [288.696871] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:56:pipe A] allocated DPLL 0

<7> [288.698416] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:56:pipe A] reserving DPLL 0

<7> [288.699997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: yes [modeset]

<7> [288.701512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [288.703068] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [288.704566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [288.706076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [288.707575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [288.709118] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [288.710330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [288.711346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [288.712300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [288.713223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [288.714048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [288.714795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [288.715383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [288.716027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [288.716824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [288.717595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [288.718325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [288.719016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [288.719446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [288.719916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [288.720452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [288.720941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [288.721473] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [288.721949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.722620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [288.723143] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [288.723731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [288.724164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [288.724596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [288.725087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [288.725639] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [288.726124] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [288.726677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [288.727106] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [288.727599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [288.728046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [288.728416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [288.728928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [288.729459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [288.730010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [288.730538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [288.731096] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [288.731598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:107] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [288.731996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [288.732519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [288.733082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [288.733615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [288.746736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [288.754652] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [288.754918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [288.755311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [288.755891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [288.756505] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [288.757230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [288.757458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [288.757689] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [288.758006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [288.758237] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [288.758441] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [288.758659] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [288.758881] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [288.759085] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [288.759589] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:56:pipe A]

<7> [288.759876] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [288.760272] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power on

<7> [288.760584] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (115 ms remaining)

<7> [288.878960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [288.929603] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.930818] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power on

<7> [288.931815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [288.980451] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.981706] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [288.982915] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.983774] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.139792] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.141078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.142524] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.145407] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.146993] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [289.154070] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.155288] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [289.160106] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [289.161439] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.162756] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [289.166046] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Clock recovery OK

<7> [289.167370] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [289.168675] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [289.172365] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [289.173701] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [289.175068] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [289.178790] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [289.180126] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:106:eDP-1][ENCODER:105:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [289.182488] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [289.185448] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [289.186744] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [289.188664] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 37

<7> [289.192914] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 335 us, max time under evasion is 250 us

<7> [289.201357] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [289.207354] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [289.208597] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [289.212406] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:114:DP-1]

<7> [289.213186] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.217896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:123:HDMI-A-1]

<7> [289.218655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.219283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.220983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.221466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.221478] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.221826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.225559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.225576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.226299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:129:DP-2]

<7> [289.231136] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:135:HDMI-A-2]

<7> [289.231998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.232422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.233239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.233709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.233722] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.234038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.237528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.237545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.322176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.322975] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.336783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.362320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.362772] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.375755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.437399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.440234] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.449617] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.450021] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.450366] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.450755] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.451214] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.451552] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.451953] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.452372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.452804] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.453963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.558627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.562791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.563945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.565618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [289.575478] Console: switching to colour dummy device 80x25

<7> [289.578244] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:107] is removed

<7> [289.578750] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [289.580154] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [289.581515] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.582866] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.584217] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [289.590536] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [289.601735] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [289.606343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [289.607710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [289.609064] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [289.610401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [289.611650] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [289.612926] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [289.614225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [289.615421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.616671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [289.617974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.619453] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.620839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.622096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.623263] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.624190] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.625225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.626162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.627038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.627979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.628570] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [289.629168] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [289.629840] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [289.630379] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [289.631110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [289.631862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [289.632454] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [289.633045] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [289.633685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [289.634225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [289.634815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [289.635392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [289.635984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [289.636558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [289.637170] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [289.637623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [289.638148] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [289.638644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [289.639087] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [289.639491] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:56:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [289.639939] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:56:pipe A] fastset requirement not met, forcing full modeset

<7> [289.640380] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:56:pipe A] releasing DPLL 0

<7> [289.640958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:56:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [289.641419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [289.642148] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:56:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [289.642840] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.643260] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [289.643700] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [289.644193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:56:pipe A] enable: no [modeset]

<7> [289.644643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [289.645109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [289.645510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [289.646759] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [289.854831] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:106:eDP-1] set backlight PWM = 0

<7> [289.857016] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [289.872109] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 turn panel power off

<7> [289.872485] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [289.873516] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - short

<7> [289.873688] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [289.875162] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [289.926224] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.926818] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.927517] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:105:DDI A/PHY A] - long

<7> [289.928768] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.928723] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.929884] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:56:pipe A]

<7> [289.930641] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:105:DDI A/PHY A]

<7> [289.932321] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [289.934279] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.937009] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:105:DDI A/PHY A]

<7> [289.939409] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:113:DDI B/PHY B]

<7> [289.940646] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:115:DP-MST A]

<7> [289.942013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DP-MST B]

<7> [289.943229] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:117:DP-MST C]

<7> [289.944711] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:128:DDI C/PHY C]

<7> [289.946514] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:130:DP-MST A]

<7> [289.948253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DP-MST B]

<7> [289.950005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:132:DP-MST C]

<7> [289.951746] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:106:eDP-1]

<7> [289.955258] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:56:pipe A]

<7> [290.051884] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [290.091483] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:106:eDP-1] removing connector from sysfs

<7> [290.097339] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:114:DP-1] removing connector from sysfs

<7> [290.102055] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:123:HDMI-A-1] removing connector from sysfs

<7> [290.113068] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:129:DP-2] removing connector from sysfs

<7> [290.117024] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:135:HDMI-A-2] removing connector from sysfs

<7> [290.147556] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 wait for panel power cycle (281 ms remaining)

<7> [290.431133] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:105:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [290.441688] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [291.090882] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [291.093356] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload