Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.19 seconds
Igt-Version 
IGT-Version: 2.3-g6f7cf72fa (x86_64) (Linux: 6.19.0-rc4-CI_DRM_17794-g6e61fdbd134b+ x86_64)
Out 
Using IGT_SRANDOM=1767970590 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.187s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.187s)
Dmesg
<6> [250.527473] Console: switching to colour dummy device 80x25
<6> [250.528874] [IGT] kms_force_connector_basic: executing
<7> [250.543761] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.548488] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.551574] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.557860] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.558007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.559526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.561348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.562242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.565140] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.567518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.568489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.570383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.572473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.572505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.574325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.577455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.577485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.578799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.581845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.583039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.583787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.583817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.586482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.587425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.589774] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.592072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.592825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.594316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.595258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.595287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.597368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.600671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.600704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.602110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.604566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.606534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.608262] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.608295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.608318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.609727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.610618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.612973] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.615281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.616241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.617657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.619579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.619613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.621179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.624719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.624752] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.626198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.629002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.629883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.630714] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.630744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.632134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.633160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.636105] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.638026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.638820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.640327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.641296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.641324] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.643161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.646805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.646840] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.648266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.650024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.652403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.652999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.653022] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.654448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.655354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.657673] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.660239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.661154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.662595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.663522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.663549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.665508] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.668706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.668739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.670170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.672863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.674006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.675244] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.677653] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [250.677691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.677712] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.679398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.680276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.682559] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.685364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.686361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.688243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.689183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.689236] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.690299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.693365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.693414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.695236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.697446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.698665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from disconnected to connected
<7> [250.698729] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.702343] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.704382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.704419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.704438] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.704455] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.704471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.704488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.705467] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.705494] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.711099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.711877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.720156] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.727013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.727771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.735970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.736797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.736851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.743957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.752729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.752787] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.759046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.761047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.762561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.762592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.762612] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.762629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.762647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.762664] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.764441] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.764567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.764590] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.765561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.766482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.768197] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.770989] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.771021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.771361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.772331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.773739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.774791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.775281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.776979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.778989] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [250.779042] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [250.779082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.779118] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [250.779138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [250.779156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.779174] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.779191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.779209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.780613] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.780753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.780774] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.781863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.782737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.785800] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.787680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.787707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.787723] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 5
<7> [250.788078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.788831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.790318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.791333] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.791408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.793366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.795092] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [250.795163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.795186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [250.795206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.795225] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.795243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.795260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.796672] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.796830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.796854] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.798082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.798857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.800595] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.803238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.804279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.806303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.807234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.807290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.808311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.812319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.812376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.813335] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 6
<7> [250.813412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.815352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.817036] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [250.817113] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [250.817153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.817173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.817192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.817209] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.817227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.817245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.820071] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [250.820108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.820132] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.821194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.822138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.824211] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.827060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.828049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.829784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.830744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.830773] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.832103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.835487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.835790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.837344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.839055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.840491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from connected to disconnected
<7> [250.840546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.840592] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.840879] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.842844] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.842880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.843974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.844741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.847356] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.849519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.850398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.851796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.852770] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.852798] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.853691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.857450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.857534] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.859121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.860749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.861936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.863409] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [250.865617] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.870624] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:112:DP-1] EDID override reset
<7> [250.870745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.870769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.871841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.872880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.875205] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.880554] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.880707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.886021] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.887425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.888351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.889817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.891253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.891283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.893307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.897494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.897576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.899377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.904597] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.906099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.906985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.908481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.909885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.909970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.911690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.914599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.914629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.916175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.918656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.922832] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.922867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.922945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.924461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.925397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.928572] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.932634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.933544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.935119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.937489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.937521] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.939513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.943423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.943501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.946080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.949026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.950233] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.951770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.951803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.953800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.954854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.957301] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.961151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.961999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.963700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.965410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.965438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.968679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.973848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.973881] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.976085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.980623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.981823] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.985479] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.985604] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.985629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.987323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.988324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.990931] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.994992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.995886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.998707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.999858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.999886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.001538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.007684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.007764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.011290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.014860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.016595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [251.019558] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:124:DP-2] EDID override reset
<7> [251.019681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [251.019705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [251.021743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.022645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.027397] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.032786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [251.033549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [251.039695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [251.041388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.042233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.044838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.046667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.046698] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.048112] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.052872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.052931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.053800] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [251.059996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.061615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.062465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.063510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.066333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.066365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.067234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.070623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.070723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.073807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.074880] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [251.075010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [251.075070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.076042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.077134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.078001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.082333] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.084336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.085277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.086761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.087971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.087999] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.088859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.094748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.095046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.097837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.100069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.101305] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [251.103150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [251.103185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.104196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.105053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.107065] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.111195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.112070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.113507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.114959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.114987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.116002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.121448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.121527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.124078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.126287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.127634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [251.129629] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:128:HDMI-A-2] EDID override reset
<7> [251.129738] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [251.129760] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.132189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.133285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.137576] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.139817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.140687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.142014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.143163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.143192] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.145103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.149418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.149496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.152400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.154356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.155501] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<6> [251.161725] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [251.166763] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [251.171836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.173631] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [251.173670] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [251.173950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [251.173977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [251.174865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.177785] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.183215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [251.183261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [251.183285] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [251.184711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.185647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.186805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.187749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.187778] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.188743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.191748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.191778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.192710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.195201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.196324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [251.196367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [251.196387] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [251.197444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [251.198335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [251.200103] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [251.205512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [251.205558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [251.205582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.206954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.207834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.209027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.210093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.210121] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.210885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.213649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.213679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.214724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [251.214757] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [251.214773] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:112:DP-1] enabled? no
<7> [251.214787] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:HDMI-A-1] enabled? no
<7> [251.214801] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:124:DP-2] enabled? no
<7> [251.214814] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-2] enabled? no
<7> [251.214974] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [251.215010] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [251.215233] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [251.222201] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [251.222255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [251.225235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.226092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.227556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.229116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.229145] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.230157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.233073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.233101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.234741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [251.239864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [251.242312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.243380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [251.244574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [251.245596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.245625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.246652] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [251.249529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [251.249558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [251.250669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [251.252974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [251.254210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [251.257758] Console: switching to colour frame buffer device 128x48
<7> [251.280096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2026-01-09 16:44:14