Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.16 seconds
Igt-Version 
IGT-Version: 2.3-g9eddcf2b9 (x86_64) (Linux: 6.19.0-rc4-CI_DRM_17786-g33c1fb917228+ x86_64)
Out 
Using IGT_SRANDOM=1767896235 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.164s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.164s)
Dmesg
<6> [250.084342] Console: switching to colour dummy device 80x25
<6> [250.086479] [IGT] kms_force_connector_basic: executing
<7> [250.100929] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.108165] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.110352] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.117457] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.117492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.117514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.120040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.120806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.124152] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.127090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.127845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.131192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.132236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.132265] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.135520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.140134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.140170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.142777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.145082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.147829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.148365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.148390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.151588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.152602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.155148] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.159267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.160145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.161688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.162702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.162730] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.166001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.170367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.170402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.173692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.175428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.178029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.180559] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.180592] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.180615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.183147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.184091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.187011] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.189058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.189865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.193270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.194426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.194453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.197689] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.202762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.202796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.204580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.206177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.209111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.209410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.209433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.211735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.212767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.215333] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.220572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.221463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.223271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.224218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.224245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.227717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.231793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.231827] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.234253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.236134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.239468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.240361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.240387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.241953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.242723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.246382] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.248682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.249542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.252634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.253816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.253844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.257208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.262063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.262096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.265145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.267145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.269002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.271374] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [250.273838] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [250.273872] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.275278] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.276679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.277576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.281132] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.284035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.284797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.288160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.289351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.289401] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.290979] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.296241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.297690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.299406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.302057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.304558] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from disconnected to connected
<7> [250.304640] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.305015] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.306084] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.306112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.306129] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.306146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.306162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.306179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.307582] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.307612] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.310436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.311471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.316703] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.322186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.323050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.328510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.332033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.332087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.332835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.340356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.340412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.346349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.349006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.350272] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.350299] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.350317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.350332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.350348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.350363] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.351578] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.351695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.351717] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.353239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.354306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.356255] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.357804] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.357830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.358151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.359015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.360101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.361012] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.361089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.362714] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.364283] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [250.364327] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [250.364360] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.364378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [250.364395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [250.364411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.364427] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.364442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.364458] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.365556] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [250.365706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.365730] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.366805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.367775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.370549] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.373077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [250.373105] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [250.373121] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 5
<7> [250.373426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.374358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.375459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [250.376425] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [250.376500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.378018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.379617] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [250.379666] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.379687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [250.379705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [250.379723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.379740] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.379757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.380632] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.380765] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.380787] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.381994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.382755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.384263] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.385932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.386722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.387835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.388762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.388815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.389730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.392346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.392393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.393257] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 6
<7> [250.393330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.394966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.396245] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [250.396297] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [250.396332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [250.396350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [250.396366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [250.396381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [250.396396] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [250.396411] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [250.398379] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [250.398413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.398436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.399474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.400371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.402219] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.404044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.404812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.406848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.407743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.407772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.408710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.411302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.411330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.412424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.413962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.415586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from connected to disconnected
<7> [250.415637] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.415865] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [250.420555] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [250.421123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.421149] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.422082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.423082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.424815] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.426493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.427469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.428674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.429575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.429602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.430540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.433120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.433148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.434066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.435703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.436656] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [250.437703] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [250.441115] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [250.444388] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:112:DP-1] EDID override reset
<7> [250.444500] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.444524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.445556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.446414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.448331] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.453640] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.453805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.459254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.460703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.461553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.462647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.463556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.463583] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.464467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.467208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.467237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.468195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.473913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.475066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.475823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.476988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.477856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.477982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.478804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.482456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.482540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.484673] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [250.484706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.484728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.485755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.487371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.489242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.490872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.494132] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.495742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.496692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.497713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.498635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.498663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.499715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.503272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.503359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.504314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.505837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.506790] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.507152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.507175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.508193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.509154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.511389] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.513207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.514045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.515130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.516047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.516075] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.516823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.519923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.520178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.521475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.523000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.523846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.524711] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [250.524813] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.524833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.525912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.526766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.528709] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.530923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.531712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.532763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.533661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.533688] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.534581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.537646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.537869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.539167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.540825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.541780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.542638] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:124:DP-2] EDID override reset
<7> [250.542737] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.542757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.543918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.544789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.547202] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.552933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.553105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.558473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.560565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.561446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.562826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.563989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.564019] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.565004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.567923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.567954] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.568991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.574123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.575371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.576320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.577811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.579282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.579313] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.580386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.583402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.583435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.585617] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [250.585650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.585673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.586693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.588311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.590054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.590851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.592600] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.594337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.595298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.597058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.599087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.599119] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.599864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.605397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.605433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.608094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.610990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.613694] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.614735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.614767] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.617021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.617789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.620216] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.624078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.624827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.626720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.628499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.628527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.631695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.635152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.636567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.638828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.640969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.641814] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.645521] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:128:HDMI-A-2] EDID override reset
<7> [250.645634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.645657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.647185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.648092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.651810] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.654513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.655398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.658073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.659046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.659074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.661478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.666491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.666524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.668227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.672062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.674633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<6> [250.679487] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [250.684197] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [250.689766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.692645] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [250.692675] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [250.694490] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [250.694529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.697094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.701275] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.706707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [250.706753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [250.706776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.709198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.712757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.716141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.717073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.721305] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.723490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.724391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.727657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.728761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.728790] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.731263] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.736008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.736042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.737033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.740712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.742542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [250.742584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [250.742606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.746046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [250.747004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [250.749193] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [250.754613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [250.754658] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [250.754679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.758369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.759248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.761038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.762049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.762079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.765424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.770947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.770990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.771842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [250.773181] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [250.773209] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:112:DP-1] enabled? no
<7> [250.773226] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:HDMI-A-1] enabled? no
<7> [250.773240] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:124:DP-2] enabled? no
<7> [250.773252] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-2] enabled? no
<7> [250.773341] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [250.773377] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [250.773604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [250.779399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [250.780717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.781575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [250.784137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [250.786424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.786453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.788031] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [250.793281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [250.793459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [250.796665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [250.803126] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [250.803475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [250.804844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.805679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [250.807242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [250.808119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.808147] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [250.809657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [250.814821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [250.814857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [250.818027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [250.821096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [250.828235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [250.831110] Console: switching to colour frame buffer device 128x48
<7> [250.853384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2026-01-08 20:43:07