igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	12.66 seconds
Igt-Version	IGT-Version: 2.3-gf7b9a7230 (x86_64) (Linux: 6.19.0-rc2-CI_DRM_17737-g118253beb816+ x86_64)
Out	Using IGT_SRANDOM=1766554250 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888117181818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88810997d818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff88810997d818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888226c95818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.658s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.658s)
Dmesg	<6> [279.659138] Console: switching to colour dummy device 80x25 <6> [279.660781] [IGT] i915_pm_rpm: executing <7> [279.664243] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [279.665032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [279.665048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [279.665647] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [279.665920] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [279.666140] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [279.666673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.666683] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [279.666689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [279.666715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [279.666953] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [279.667178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [279.668933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [279.668943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [279.668951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [279.669051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [279.669059] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [279.673435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [279.673526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [279.673534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [279.674253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.674565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.674970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.675274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.675285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.675558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.678621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.678630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.678892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [279.678985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [279.678993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [279.683309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [279.683394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [279.683402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [279.683901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.684116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.684545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.684857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.684864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.685075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.688123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.688132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.688419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [279.695374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [279.695386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [279.699761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [279.700499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [279.700509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [279.701021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.701274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.701744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.701998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.702006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.702302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.705379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.705388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.705659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [279.706456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [279.706469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [279.710936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [279.711911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [279.711924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [279.712599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.712891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.713444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.713827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.713836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.714182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.717426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.717436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.717807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [279.718585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [279.718597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [279.719008] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [279.719373] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [279.719688] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [279.720074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [279.720084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [279.720092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [279.720126] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [279.720470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [279.720828] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [279.722082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [279.722093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [279.722105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [279.722151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [279.722160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [279.726639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [279.726693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [279.726705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [279.727329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.727692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [279.728235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [279.728598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.728605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.728905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [279.732114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [279.732123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [279.732530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [279.732586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [279.732596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [279.737047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [279.737088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [279.737098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [279.737761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.738130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [279.738657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [279.739033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.739043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [279.739398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [279.742596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [279.742607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.743005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [279.743756] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [280.015383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [280.805248] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [280.805839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [280.807056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [280.808835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [280.810683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [280.812245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [280.813896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [280.815464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [280.817038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [280.818585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [280.820132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [280.821688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [280.823258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [280.824799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [280.826338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [280.827881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [280.829440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [280.830991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [280.832519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [280.834063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [280.835587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [280.837134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [280.838676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [280.840197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [280.841729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [280.843271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [280.844800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [280.846256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [280.847709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [280.849264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [280.850819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [280.852255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [280.853618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [280.855198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [280.856721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [280.858288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [280.859817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [280.861271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [280.862782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [280.864371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [280.865924] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [280.867486] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [280.869148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [280.870785] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [280.872306] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [280.873347] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [280.874296] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.875265] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.876190] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [280.877377] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [280.878478] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [280.879561] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [280.880531] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [280.881261] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [280.881957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [280.882694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [280.883415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [280.884111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [280.885248] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [280.888337] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [281.095551] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [281.097531] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [281.116544] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [281.117070] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [281.117611] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [281.118408] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [281.119010] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [281.170149] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [281.170316] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.171820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [281.172626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [281.173261] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [281.176058] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [281.176141] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [281.178086] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [281.179724] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.180311] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [281.182847] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [281.184476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [281.185729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [281.186869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [281.187870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [281.188919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [281.189775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [281.190809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [281.191716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [281.192796] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [281.194777] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [281.197536] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [281.198546] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [281.303856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [281.305623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [281.307365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [281.309391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [281.314569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [281.334579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [281.412827] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [281.414122] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [281.415362] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [281.416895] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [281.419121] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [281.420159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [281.421930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [281.423253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [281.424702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [281.426387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [281.427862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [281.429633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [281.431175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [281.432743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [281.434292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [281.435805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [281.437035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [281.438557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [281.440081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [281.441605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [281.443129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [281.444350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [281.445801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [281.446918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [281.448137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [281.449184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [281.450409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [281.451410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [281.452664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [281.453693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [281.454877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [281.456295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [281.457563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [281.458597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [281.459816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [281.460944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [281.462173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [281.463176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [281.464450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [281.465505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [281.467035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [281.468590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [281.470129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [281.471694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [281.473270] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [281.475077] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [281.476629] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [281.478162] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [281.479720] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [281.481272] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [281.482804] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [281.484365] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [281.486286] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [281.487985] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [281.489551] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [281.491081] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [281.492707] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [281.494272] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [281.495871] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [281.497438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [281.498989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [281.500526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [281.502066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [281.503598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [281.505171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [281.506731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [281.508304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [281.509853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [281.511442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [281.512991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [281.514529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [281.516072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [281.517615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [281.519166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [281.520733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [281.522279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [281.523606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [281.524582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [281.525567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [281.526545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [281.527515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [281.528483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [281.529467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [281.530445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.531425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [281.532366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [281.533065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [281.533786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [281.534504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [281.535223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [281.535912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [281.536651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [281.537360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [281.538049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [281.538780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [281.539493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [281.540183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [281.540897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [281.541531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [281.542076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [281.542652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [281.543217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [281.543763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [281.544335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [281.544883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [281.545458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [281.546008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [281.558292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [281.566534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [281.566947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.567457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.568290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [281.569006] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [281.570039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [281.570294] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [281.570617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [281.570942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [281.571284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [281.571607] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [281.571919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [281.572214] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [281.572506] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [281.572889] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [281.573134] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [281.573605] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [281.573929] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (99 ms remaining) <7> [281.679662] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [281.771335] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.772500] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [281.773640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [281.822324] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [281.823421] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [281.824424] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [281.825541] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [281.980144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.981620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.984788] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [281.989168] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [281.990440] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [281.995127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [281.996384] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [282.002506] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [282.004303] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [282.005781] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [282.010529] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [282.011633] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [282.012906] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [282.016414] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [282.017372] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [282.018338] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [282.022028] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [282.022985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [282.024952] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [282.027606] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [282.028709] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [282.030534] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [282.043476] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [282.049364] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [282.050700] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [282.055953] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [282.055331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.061341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.063586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <6> [282.064822] [IGT] i915_pm_rpm: starting subtest module-reload <7> [282.065188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [282.066905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [282.068469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [282.068510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [282.069959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [282.076475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [282.076518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [282.078175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.085398] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.088064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [282.089584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [282.091947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [282.093568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [282.093609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [282.095765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [282.102087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [282.102132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [282.202804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.203652] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.216392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.241907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.242318] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.255347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.323313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.325569] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.337888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.338613] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.340300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.340977] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.342171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.342810] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.344353] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.344867] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.345400] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.349989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.440897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.442018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [282.442534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [282.443146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [282.445723] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [282.445964] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [282.447004] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [282.447976] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.449014] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.450033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [282.452155] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [282.460539] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [282.476535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [282.477348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [282.477942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [282.478596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [282.479450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [282.480056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [282.480706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [282.481370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.481959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [282.482678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.483351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.483941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.484564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.485236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.485934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.486602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.487286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.487895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [282.488539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.489176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [282.489812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [282.490469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [282.491072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [282.491969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [282.492912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [282.493564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [282.494329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [282.494969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [282.495631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [282.496402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [282.496995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [282.497656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [282.498460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [282.499054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [282.499788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [282.500577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [282.501423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [282.502385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [282.503347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [282.504309] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [282.505266] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [282.506079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [282.506847] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [282.508020] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [282.508993] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [282.509946] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [282.510893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [282.511843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [282.512530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [282.513164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [282.514109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [282.516233] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [282.719533] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [282.721804] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [282.730467] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [282.730879] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [282.732009] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [282.732436] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [282.733622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [282.785196] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [282.786333] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [282.787504] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [282.788849] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [282.792177] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [282.792771] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [282.793926] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [282.795321] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [282.797005] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [282.800329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [282.802397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [282.804191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [282.805964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [282.807674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [282.809432] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [282.811254] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [282.812957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [282.814734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [282.816457] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [282.820078] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [282.900416] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [282.952023] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [282.973370] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [282.982399] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [282.994481] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [283.000168] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [283.030564] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (260 ms remaining) <7> [283.295646] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [283.378169] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [284.020456] [IGT] Reloading i915 w/o display <5> [284.851092] Setting dangerous option force_probe - tainting kernel <6> [284.863418] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [284.865127] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [284.865705] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [284.865975] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [284.866255] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [284.866661] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [284.867259] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [284.867618] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [284.868864] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [284.869091] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [284.869321] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [284.869636] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [284.869650] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [284.870551] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [284.870608] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [284.870971] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [284.871318] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e7fff], io: n/a <7> [284.871509] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [284.872327] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [284.872795] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [284.873165] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [284.873549] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [284.873841] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [284.881206] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [284.881534] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [284.881789] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [284.882042] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [284.882388] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.882702] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.882969] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [284.883278] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [284.883595] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [284.883851] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [284.884105] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [284.884462] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [284.884795] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [284.885073] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [284.885421] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [284.885810] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [284.886673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [284.886967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [284.887515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [284.887831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [284.888117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [284.888410] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [284.888735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [284.889003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [284.889301] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [284.889625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [284.889896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [284.890254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [284.890541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [284.890811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [284.891068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [284.891368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.891680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [284.891938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [284.892197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.892503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [284.892792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.893074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [284.893365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [284.893734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [284.894116] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [284.894572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.894944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [284.895690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [284.895971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.896254] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [284.896628] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [284.897015] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [284.897531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.897914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.898280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.898601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.898964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [284.899374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [284.899766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [284.900159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [284.901199] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [284.902273] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [284.902606] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [284.902862] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [284.903117] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [284.903845] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [284.904472] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [284.905048] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [284.905437] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [284.905710] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [284.906014] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [284.906293] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [284.906597] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [284.906847] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [284.907093] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [284.907380] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [284.907688] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [284.907937] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [284.908212] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [284.908550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [284.908798] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [284.909045] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [284.909362] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [284.909736] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [284.910112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [284.915060] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [284.919002] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [284.919484] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [284.919925] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [284.928206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [284.928629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [284.929024] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [284.929432] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [284.929954] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [284.930378] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [284.930767] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [284.931152] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [284.931559] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [284.931931] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [284.932687] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [284.933105] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [284.933509] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [284.933872] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [284.934261] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [284.934633] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [284.935052] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [284.935714] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [284.936112] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [284.936531] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.947375] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [284.947708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [284.947961] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [285.153235] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [285.154080] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [285.156140] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [285.160140] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [285.181878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [285.181925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [285.181951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [285.182474] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [285.184566] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [285.186539] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [285.188952] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [285.191045] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [285.194027] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [285.195945] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [285.197897] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [285.199796] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [285.201750] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [285.203729] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [285.207802] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [285.210010] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [285.216564] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [285.218758] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [285.220714] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [285.225067] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [285.227335] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [285.232325] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [285.234495] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [285.236429] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [285.242385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [285.245484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [285.248547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [285.250832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [285.253124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [285.255476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [285.257749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [285.260025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [285.262344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [285.264619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [285.266903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [285.269168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [285.270592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [285.271959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [285.273242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [285.274484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [285.275733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [285.277141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [285.278358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [285.279223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [285.280066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [285.281039] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [285.282011] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [285.282979] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [285.283966] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [285.285948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [285.286701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [285.287424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [285.287982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [285.288577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [285.289040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [285.289547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [285.290057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [285.290514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [285.291037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [285.291547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [285.292201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [285.292843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [285.293519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [285.294132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [285.294704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [285.295251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [285.295701] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.296140] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.296544] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [285.297219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [285.297590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [285.297935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [285.298380] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [285.298804] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [285.299081] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [285.299404] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [285.299764] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [285.303148] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [285.303533] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [285.303868] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [285.326528] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [285.326779] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [285.326975] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [285.327207] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [285.327508] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [285.327777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [285.328040] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [285.328454] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [285.328730] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [285.328993] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [285.329292] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [285.329640] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [285.329916] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [285.330205] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [285.330527] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [285.330789] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [285.331051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [285.331366] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [285.331674] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [285.332205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [285.332521] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [285.332789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [285.333405] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [285.334029] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [285.334551] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [285.335049] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [285.341396] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [285.342884] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [285.343442] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [285.344482] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [285.347627] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [285.347752] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [285.349124] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [285.352609] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [285.352767] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [285.356990] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [285.357159] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [285.358790] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [285.361384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [285.361535] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [285.362962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [285.363079] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [285.369348] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [285.406712] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [285.415781] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [285.417899] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [285.422849] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [285.423313] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [285.423714] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [285.424109] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [285.424995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [285.425414] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.425835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [285.426236] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.427411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [285.427837] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.428608] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.429425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [285.429814] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [285.430245] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [285.432466] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [285.432626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [285.432641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [285.433088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected <7> [285.433108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [285.433130] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [285.433659] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2 <7> [285.433689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [285.433702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [285.434103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [285.434115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [285.434126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [285.434556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [285.434773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [285.434785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [285.435178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [285.435382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [285.435394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [285.435780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [285.435791] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [285.435800] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [285.435808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [285.435816] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [285.435824] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [285.435831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [285.435890] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [285.435911] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [285.436026] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [285.436040] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [285.439230] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [285.439701] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [285.440114] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [285.440574] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [285.440988] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [285.441419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [285.441831] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [285.442254] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [285.442668] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [285.443083] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [285.443505] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [285.443916] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [285.444338] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [285.444751] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [285.445166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [285.445586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [285.445912] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [285.446263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [285.446666] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [285.447075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [285.447498] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [285.447909] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [285.448567] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [285.448703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [285.448719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [285.449119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [285.449134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [285.449145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [285.449528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [285.449541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [285.449551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [285.449935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [285.449947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [285.449958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [285.450361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [285.450373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [285.450384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [285.450767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [285.450779] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [285.450788] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [285.450797] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [285.450806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [285.450815] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [285.450823] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [285.450880] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [285.450900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [285.451003] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [285.451034] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [285.451215] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [285.452850] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [285.453324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [285.453757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [285.454180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [285.454819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [285.455256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [285.456028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [285.456908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [285.457246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [285.457566] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [285.457854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [285.458166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [285.458507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [285.458826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [285.459149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [285.459478] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [285.459802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [285.460124] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [285.460453] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [285.460775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [285.461097] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [285.461449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [285.461770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [285.462089] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [285.462429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [285.462747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [285.463072] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [285.463420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [285.463744] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [285.464065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [285.464415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [285.464739] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [285.465062] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [285.465408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [285.465734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [285.466057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [285.466406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [285.466724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [285.467042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [285.467379] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [285.467652] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [285.467847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [285.468038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [285.468262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [285.468571] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [285.468834] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [285.469027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [285.469246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [285.469504] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [285.469695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [285.469886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [285.470077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [285.470332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [285.470608] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [285.470799] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [285.471000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [285.471332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [285.471649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [285.471968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [285.472296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [285.472616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [285.472934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [285.473258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [285.473572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [285.473894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [285.474241] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [285.474559] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [285.474882] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [285.475222] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [285.475227] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [285.475231] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [285.489787] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [285.491482] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [285.492026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [285.492910] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [285.499093] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [285.528612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.528945] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.529252] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [285.529551] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.529778] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.530003] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [285.530299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.530663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [285.531025] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [285.563753] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [285.577102] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [285.579247] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [286.816993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.714479] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off <7> [287.715475] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [287.716401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.717021] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.717431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.717532] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [287.717791] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [287.718053] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [287.718353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.719280] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [287.719656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [287.725194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [287.817112] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [287.842316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [287.850726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [287.851103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.851442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.851842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.852238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.852620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.853004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.853461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.853845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.854554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.855248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.855904] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.869275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.869642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.869935] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.870239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.871054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [287.981792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [287.982083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [287.983086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [287.983750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.985051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.992586] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.992919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.993149] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.993409] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.993656] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.993875] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.994093] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.994386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.994604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.995320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [287.996053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [287.996434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [287.996778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [287.997537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [288.071286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [288.071627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [288.072315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [288.072988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [288.073596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [288.073949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [288.074326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [288.074694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [288.075065] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [288.107603] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [288.122280] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [288.129557] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [288.138794] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [288.154069] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [288.155562] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [288.191692] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (25 ms remaining) <7> [288.218605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [288.228355] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [288.674962] [IGT] Reloading i915 as normal <5> [289.520327] Setting dangerous option force_probe - tainting kernel <6> [289.532611] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [289.534419] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [289.534822] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [289.535090] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [289.535381] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [289.535743] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [289.536138] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [289.536394] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [289.537494] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [289.537753] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [289.537960] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [289.538165] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [289.538231] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [289.538872] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [289.538913] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [289.539200] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [289.539467] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e7fff], io: n/a <7> [289.539662] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [289.540337] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [289.540665] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [289.540979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [289.541262] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [289.541549] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [289.548193] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [289.548515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [289.548767] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [289.549020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [289.549369] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.549673] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.549939] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [289.550226] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [289.550509] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [289.550773] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [289.551036] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [289.551325] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [289.551610] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [289.551884] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [289.552179] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [289.552491] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [289.553465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [289.553912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [289.554350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [289.554774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [289.555211] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [289.555631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [289.556053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [289.556535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [289.556959] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [289.557411] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [289.557819] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [289.558248] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [289.558638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [289.559036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [289.559445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [289.559852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.560274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [289.560685] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [289.561079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.561491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [289.561887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.562291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [289.562690] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [289.563086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [289.563508] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [289.563937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.564456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [289.564887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [289.565311] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.565720] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [289.566116] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [289.566520] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [289.567042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.567457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.567862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [289.568296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.568805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.569219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [289.569624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [289.570028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [289.571294] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [289.572770] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [289.573207] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [289.573609] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [289.573703] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [289.574010] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [289.574897] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [289.574846] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [289.575387] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [289.575775] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [289.576109] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [289.576385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [289.576641] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [289.576896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [289.577151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [289.577452] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [289.577700] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [289.577947] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [289.578228] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [289.578564] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [289.578813] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [289.579060] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [289.579328] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [289.579611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [289.579859] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [289.584837] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [289.590777] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [289.591298] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [289.591729] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [289.599206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [289.599633] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [289.600025] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [289.600457] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [289.602712] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [289.603106] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [289.603514] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [289.603893] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [289.604292] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [289.604674] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [289.605849] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [289.606159] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.606456] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.606702] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.606945] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.607229] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.607511] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.608153] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [289.608483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [289.608766] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.619350] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.619657] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [289.619902] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [289.827046] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.828821] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [289.830555] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [289.834532] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [289.851242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [289.851291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [289.851322] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [289.851804] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.853554] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.855216] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [289.857306] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [289.858989] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [289.860903] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [289.862128] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [289.863289] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [289.864650] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [289.865786] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [289.867129] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [289.869591] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [289.871229] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [289.875247] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.876541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [289.877673] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [289.880790] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [289.882034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [289.885136] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [289.886385] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [289.887559] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [289.892025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [289.894105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [289.896108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [289.897410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [289.898792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [289.900332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [289.901996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [289.903383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [289.904696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [289.906014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [289.907404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [289.908735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [289.909802] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [289.910842] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [289.911626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [289.912362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [289.913108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [289.914007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [289.914762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [289.915495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [289.916496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [289.917415] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [289.918255] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [289.918842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [289.919495] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [289.920241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [289.920888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [289.921590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [289.922326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [289.922966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [289.923765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [289.924560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [289.925356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [289.926123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [289.926716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [289.927381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [289.927992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [289.928617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [289.929265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [289.929866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [289.930321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [289.930850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [289.931481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.932077] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.932690] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [289.933632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [289.934042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [289.934597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [289.935226] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [289.935959] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [289.936460] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [289.936905] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [289.937405] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [289.940562] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [289.940909] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [289.941268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [289.964447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [289.964701] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [289.964899] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [289.965095] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [289.965312] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [289.965686] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [289.966072] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [289.966614] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [289.966994] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [289.967355] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [289.967675] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [289.967932] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [289.968225] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [289.968493] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [289.968746] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [289.969000] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [289.969338] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [289.969725] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [289.970108] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [289.970825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [289.971206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [289.971532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [289.972015] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [289.972714] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [289.973141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [289.973647] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [289.979835] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [289.982375] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [289.982862] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [289.983894] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [289.986826] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [289.987083] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [289.988733] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [289.991426] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [289.991682] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [289.992988] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [289.993106] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [289.994234] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [289.996139] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [289.996305] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [289.997694] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [289.997812] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [290.003613] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [290.037118] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [290.047674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [290.048963] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [290.053727] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.056134] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [290.056588] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [290.056989] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [290.057386] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [290.058074] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [290.058693] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [290.059137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.060220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.060628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.061231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.062648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [290.062795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.062804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.063137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.066554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.066568] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.067047] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [290.069434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.073992] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [290.074517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.075255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.075650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.078258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.078698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.078710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.079094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.084330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.084410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.084806] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [290.086049] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [290.087859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [290.087877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [290.088800] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.089275] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.089656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.090013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.090022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [290.090028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [290.090056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [290.090422] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.090823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.092948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected <7> [290.092983] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [290.093606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [290.093618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.093629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.093642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.094358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.098913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.098934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.098946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.100094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.100532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.101119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.101597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.101609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.101992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.105428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.105441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.105883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.105898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [290.105910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.110460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.110482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.110495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.111330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.111738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.112327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.112755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.112766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.113155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.117316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.117333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.117833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.117848] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [290.117858] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [290.117866] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [290.117874] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [290.117882] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [290.117944] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [290.117980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [290.117988] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [290.118020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [290.118155] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [290.118238] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [290.125096] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [290.127438] fbcon: i915drmfb (fb0) is primary device <6> [290.130642] Console: switching to colour frame buffer device 200x56 <6> [290.130663] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [290.130856] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [290.130875] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [290.130678] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [290.131120] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [290.131534] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [290.131942] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [290.132371] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [290.132785] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [290.133204] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [290.133778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [290.133586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [290.133804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [290.134013] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [290.134457] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [290.134656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.134876] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [290.135103] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.135349] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [290.135577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.135791] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [290.136236] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [290.136621] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [290.136893] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.136906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [290.136924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [290.136988] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [290.137023] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [290.137460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.137529] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [290.137905] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.137985] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [290.138463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [290.138860] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [290.139285] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [290.139685] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [290.141712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [290.141735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.141748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.141761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.141772] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.146402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.146423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.146437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.147883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.148326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.148914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.149662] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [290.150076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [290.150508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [290.150923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [290.152221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [290.152653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.153673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.153687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.154122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.156293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [290.156634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [290.156953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [290.157293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [290.157614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [290.157934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [290.158267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [290.158581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [290.158897] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [290.159257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [290.159573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [290.159894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [290.160234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [290.160551] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [290.160874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [290.161210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [290.161531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [290.161854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [290.162189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [290.162507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [290.162822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [290.163141] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [290.163482] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [290.163800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [290.164120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [290.164443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [290.164764] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [290.165085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [290.165420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [290.165736] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [290.166060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [290.166401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [290.166722] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [290.167046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [290.167386] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [290.167707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [290.168032] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [290.168368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [290.168685] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [290.169010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [290.169346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [290.169660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [290.169922] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [290.170133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [290.170364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [290.170622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [290.170824] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [290.171016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [290.171232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [290.171489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [290.171681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [290.171872] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [290.172064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [290.172285] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [290.172540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [290.172733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [290.172924] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [290.173115] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [290.173328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [290.173599] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [290.173791] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [290.173982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [290.174189] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [290.174193] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [290.174196] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [290.175669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.175680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.175994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.176006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [290.176015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.180502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.180523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.180536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.181211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.181555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.182220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.182561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.182572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.182905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.187702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.187717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.188022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.188033] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [290.188040] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [290.188046] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [290.188052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [290.188057] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [290.188979] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [290.189028] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [290.189036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [290.189106] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [290.190332] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [290.190763] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [290.191124] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [290.191597] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [290.191958] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [290.192310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [290.192633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [290.192999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [290.193393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [290.193760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [290.194121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [290.194494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [290.194861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <6> [290.195140] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [290.195227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [290.195589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [290.195937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [290.196262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [290.196571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [290.196903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [290.197261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [290.197620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [290.197974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [290.198350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [290.198709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [290.199060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [290.199392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [290.199745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [290.200104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [290.200495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [290.200859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [290.201231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [290.201588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [290.201948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [290.202319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [290.202683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [290.203048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [290.203417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [290.203771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [290.204066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [290.204371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [290.204673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state <7> [290.204936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [290.205218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [290.205467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [290.205720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [290.205951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [290.206201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [290.206552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [290.206900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [290.207206] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [290.207599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [290.207836] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [290.208061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [290.208383] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [290.208738] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [290.209084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [290.209448] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [290.210668] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [290.211099] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [290.211673] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [290.212032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [290.212421] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [290.212782] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [290.213147] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [290.213523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [290.213877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [290.214243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [290.214602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [290.214961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [290.215347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [290.215702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [290.216059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [290.216433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [290.216788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [290.217151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [290.217513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [290.217865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [290.218217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [290.218572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [290.218929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [290.219303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [290.219664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [290.220017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [290.220378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [290.220736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [290.221095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [290.221451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [290.221805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [290.222158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.222537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.222899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [290.223267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.223631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [290.223994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [290.224366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [290.224720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [290.225077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [290.225450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [290.225808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [290.226158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [290.226525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [290.226878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [290.227237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.227567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.227898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [290.228190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [290.228539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [290.228827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [290.229062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [290.229317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [290.229568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [290.229799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [290.231267] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [290.232761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [290.233062] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [290.233455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [290.233818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [290.234185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [290.234531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [290.234873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [290.235105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [290.235440] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [290.236613] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [290.237006] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [290.237795] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [290.238332] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [290.238741] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [290.248215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.248601] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [290.248994] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [290.451119] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.451868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [290.452970] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.455574] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [290.456266] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [290.457809] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [290.458339] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [290.458822] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [290.461014] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [290.461704] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [290.462352] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [290.464864] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [290.465737] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [290.466496] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [290.468961] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [290.469928] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [290.472965] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [290.475715] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [290.476889] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [290.478615] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [290.483334] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 359 us, max time under evasion is 250 us <7> [290.492642] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [290.502753] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [290.504667] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [290.508943] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [290.518053] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [290.518714] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [290.518832] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [290.518870] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [290.519425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [290.519497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [290.522050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.522099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.523992] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.525530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.529365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.529425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [290.529469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [290.529626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [290.533109] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [290.534240] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.535978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.538949] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [290.546302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [290.546368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.546426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.546483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.546534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.553567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.553643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.553697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.559450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.561291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.566249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.568381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.568412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.569459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.574579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.574614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.575779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.575819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [290.575852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.582335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.582370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.582394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.583286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.583985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.584939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.585732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.585753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.586543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.590479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.590500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.591106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.591126] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [290.591141] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [290.591154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [290.591187] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [290.591200] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [290.591286] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [290.591335] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [290.591350] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [290.592128] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [290.592537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [290.592557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [290.593530] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [290.593796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.594390] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.594916] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.595520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.595534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [290.595545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [290.595591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [290.596020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.596493] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.599135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [290.599152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.599211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.599386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.599400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.604280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.604419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.604430] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.605267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.605708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.609238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.609756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.609768] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.610147] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.614207] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.614550] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.614791] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [290.615016] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.615263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.615625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [290.615967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.615854] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.615980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.616199] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.616403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.616544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [290.616585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [290.616555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.623321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.623449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.623468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.624109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.624484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.625104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.625623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.625635] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.625988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.629448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.629544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.629997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.639021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.639038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [290.643705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.644742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.644756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.645647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.646039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.646758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.647146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.647157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.647778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.651196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.651210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.651638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.652871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [290.652891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [290.657563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.658587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.658600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.659283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.659641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.660161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.660562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.660572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.660924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.664159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.664195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.664583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.665313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [290.665326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [290.665748] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [290.666096] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [290.666475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [290.666875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [290.666887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [290.666895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [290.666938] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [290.667312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [290.667634] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [290.669304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [290.669317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [290.669328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [290.669376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [290.669385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <6> [290.671966] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [290.674258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [290.674313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [290.674324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [290.674958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.675326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [290.675831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [290.676336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.676347] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.676687] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [290.679874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [290.679888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [290.680544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [290.680594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <6> [290.680732] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <7> [290.680605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <6> [290.684211] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [290.685091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [290.685145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [290.685156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [290.685917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.686287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [290.686788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [290.687144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.687155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [290.688640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [290.692216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [290.692231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [290.692645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [290.693451] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142] <7> [291.739991] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [291.740605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [291.741746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [291.742735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [291.743907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [291.744903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [291.745466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [291.745706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [291.745945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.746214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [291.746506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.746746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.746984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.747241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.747518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.747757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.748001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.748260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.748546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [291.748787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.749027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [291.749290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [291.749569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [291.749808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [291.750047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [291.750304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [291.750583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [291.750826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [291.751078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [291.751353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [291.751593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [291.751831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [291.752073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [291.752330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [291.752629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [291.752870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [291.753110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [291.753370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [291.753683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [291.753933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [291.754200] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [291.754483] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [291.754767] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [291.755026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [291.755281] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [291.755552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [291.755785] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.756024] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.756287] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [291.756594] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [291.756866] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [291.757151] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [291.757434] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [291.757702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [291.757934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [291.758183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [291.758478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [291.758712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [291.759109] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [291.760544] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [291.945618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [291.968356] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [291.969798] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [291.979073] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [291.979600] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [291.980229] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [291.980911] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [291.981630] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [292.033202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [292.033261] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.034610] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [292.035574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [292.035820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [292.041516] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [292.041896] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [292.042874] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [292.043670] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [292.045076] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [292.048027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [292.049089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [292.049976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [292.051135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [292.052064] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [292.053122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [292.054106] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [292.055571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [292.056682] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [292.057816] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [292.059870] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [292.062498] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [292.063474] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [292.167861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [292.169669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [292.170919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [292.172374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [292.175404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [292.192274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [292.282772] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [292.284034] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [292.285038] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [292.286143] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [292.287238] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [292.288023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [292.289034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [292.290120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [292.291925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [292.294094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [292.295499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [292.296710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [292.297782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.298811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [292.299959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.300885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.301810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.302836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.303853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.304815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.305975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.307360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.308389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [292.309397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.310369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [292.311380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [292.312381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [292.313351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [292.314500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [292.315590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [292.317017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [292.318367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [292.319626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [292.320705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [292.321919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [292.322924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [292.324120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [292.325208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [292.326459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [292.327759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [292.329040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [292.330076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [292.331355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [292.332384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [292.333628] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [292.334957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [292.336039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [292.337136] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [292.338348] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [292.339869] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [292.341385] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [292.342883] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [292.344692] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [292.346332] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [292.347349] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [292.348821] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [292.350334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [292.351789] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [292.353125] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [292.354454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [292.355411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [292.356303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [292.357345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [292.358683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [292.359998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [292.361325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [292.362645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [292.363911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [292.365094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [292.366103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [292.367426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [292.368759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [292.370074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [292.371405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [292.372719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [292.373793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [292.374913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [292.376266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [292.377584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [292.378922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [292.380234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [292.381398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [292.382455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [292.383802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.385128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [292.386459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.387787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [292.388830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [292.389551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [292.390104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [292.390863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [292.391744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [292.392626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [292.393501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [292.394371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [292.395048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [292.395635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [292.396517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.397356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.397997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [292.398650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [292.399275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [292.399681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [292.400122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [292.400793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [292.401459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [292.402098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [292.414287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [292.424034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [292.424499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [292.425150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [292.425940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [292.426730] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [292.427720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [292.428115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [292.428542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [292.428912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [292.429298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [292.429668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [292.430038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [292.430431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [292.430801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [292.431455] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [292.431846] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [292.432520] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [292.433031] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (102 ms remaining) <7> [292.543400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [292.553307] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.553670] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [292.554032] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [292.604176] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [292.605274] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [292.606276] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [292.607389] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [292.756120] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [292.757428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [292.758718] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.761708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [292.763408] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [292.770775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [292.772031] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [292.775766] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [292.777250] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [292.778805] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [292.782687] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [292.784227] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [292.785531] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [292.790940] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.792328] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.793776] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.797687] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [292.799231] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [292.800689] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [292.804124] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [292.805485] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [292.807870] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [292.810781] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [292.811804] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [292.813387] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [292.817518] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 312 us, max time under evasion is 250 us <7> [292.826721] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [292.832576] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [292.834502] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [292.839607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [292.841072] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [292.847218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [292.848801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.850104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [292.852266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [292.853650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.853686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.855682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [292.862141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [292.862218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [292.868799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [292.875419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [292.876693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.877713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [292.879002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [292.880088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.880115] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [292.880965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [292.885323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [292.885343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [292.976891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [292.977734] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [292.990344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.015754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.016087] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [293.029344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.074799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.075771] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [293.084012] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.084361] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.084628] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [293.084887] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.085139] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.085421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [293.085838] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [293.086551] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [293.086972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [293.088111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [293.170237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [293.171103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [293.171576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [293.172260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [293.176333] Console: switching to colour dummy device 80x25 <7> [293.177625] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [293.177812] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [293.178524] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [293.179199] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.179967] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.180834] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [293.184340] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [293.193627] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [293.197579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [293.198311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [293.198978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [293.199739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [293.200436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [293.201103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [293.201798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [293.202797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.203683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [293.204538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.205387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.206228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.206979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.207576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.208458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.209387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.210322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.211110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [293.212084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.213006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [293.213710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [293.214309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [293.215093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [293.215917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [293.216731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [293.217540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [293.218345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [293.218952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [293.219502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [293.220367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [293.221210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [293.221997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [293.222814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [293.223671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [293.224446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [293.225133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [293.225969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [293.226786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [293.227609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [293.228433] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [293.229138] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [293.230042] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [293.231065] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [293.232109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [293.232938] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [293.233769] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [293.234585] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [293.235472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [293.236300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [293.237103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [293.237941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [293.239779] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [293.447502] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [293.450052] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [293.463568] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [293.463749] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [293.464733] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [293.464883] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [293.465896] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [293.517241] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [293.517854] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [293.518354] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [293.519437] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [293.519959] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [293.520576] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [293.522991] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [293.523048] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [293.524852] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [293.528800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [293.530880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [293.532662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [293.534394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [293.536078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [293.537879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [293.539676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [293.541456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [293.543118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [293.544870] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [293.548492] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [293.612975] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [293.660561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [293.671342] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [293.680036] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [293.690337] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [293.695192] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [293.717461] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (302 ms remaining) <7> [294.023738] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [294.054359] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [294.725672] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [294.727230] [IGT] i915_pm_rpm: exiting, ret=0

<6> [279.659138] Console: switching to colour dummy device 80x25

<7> [279.664243] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [279.665032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [279.665048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [279.665647] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [279.665920] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [279.666140] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [279.666673] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.666683] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [279.666689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [279.666715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [279.666953] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [279.667178] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [279.668933] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [279.668943] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [279.668951] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [279.669051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [279.669059] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [279.673435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [279.673526] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [279.673534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [279.674253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.674565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.674970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.675274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.675285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.675558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.678621] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.678630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.678892] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [279.678985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [279.678993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [279.683309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [279.683394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [279.683402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [279.683901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.684116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.684545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.684857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.684864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.685075] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.688123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.688132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.688419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [279.695374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [279.695386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [279.699761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [279.700499] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [279.700509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [279.701021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.701274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.701744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.701998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.702006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.702302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.705379] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.705388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.705659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [279.706456] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [279.706469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [279.710936] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [279.711911] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [279.711924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [279.712599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.712891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.713444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.713827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.713836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.714182] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.717426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.717436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.717807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [279.718585] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [279.718597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [279.719008] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [279.719373] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [279.719688] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [279.720074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [279.720084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [279.720092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [279.720126] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [279.720470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [279.720828] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [279.722082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [279.722093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [279.722105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [279.722151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [279.722160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [279.726639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [279.726693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [279.726705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [279.727329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.727692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [279.728235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [279.728598] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.728605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.728905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [279.732114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [279.732123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [279.732530] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [279.732586] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [279.732596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [279.737047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [279.737088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [279.737098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [279.737761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.738130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [279.738657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [279.739033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.739043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [279.739398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [279.742596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [279.742607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.743005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [279.743756] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [280.015383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [280.805248] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [280.805839] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [280.807056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [280.808835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [280.810683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [280.812245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [280.813896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [280.815464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [280.817038] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [280.818585] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [280.820132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [280.821688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [280.823258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [280.824799] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [280.826338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [280.827881] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [280.829440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [280.830991] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [280.832519] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [280.834063] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [280.835587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [280.837134] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [280.838676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [280.840197] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [280.841729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [280.843271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [280.844800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [280.846256] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [280.847709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [280.849264] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [280.850819] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [280.852255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [280.853618] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [280.855198] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [280.856721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [280.858288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [280.859817] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [280.861271] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [280.862782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [280.864371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [280.865924] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [280.867486] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [280.869148] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [280.870785] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [280.872306] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [280.873347] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [280.874296] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.875265] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.876190] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [280.877377] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [280.878478] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [280.879561] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [280.880531] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [280.881261] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [280.881957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [280.882694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [280.883415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [280.884111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [280.885248] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [280.888337] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [281.095551] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [281.097531] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [281.116544] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [281.117070] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [281.117611] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [281.118408] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [281.119010] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [281.170149] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [281.170316] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.171820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [281.172626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [281.173261] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [281.176058] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [281.176141] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [281.178086] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [281.179724] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.180311] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [281.182847] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [281.184476] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [281.185729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [281.186869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [281.187870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [281.188919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [281.189775] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [281.190809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [281.191716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [281.192796] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [281.194777] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [281.197536] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [281.198546] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [281.303856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [281.305623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [281.307365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [281.309391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [281.314569] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [281.334579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [281.412827] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [281.414122] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [281.415362] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [281.416895] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [281.419121] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [281.420159] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [281.421930] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [281.423253] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [281.424702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [281.426387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [281.427862] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [281.429633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [281.431175] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [281.432743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [281.434292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [281.435805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [281.437035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [281.438557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [281.440081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [281.441605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [281.443129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [281.444350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [281.445801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [281.446918] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [281.448137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [281.449184] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [281.450409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [281.451410] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [281.452664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [281.453693] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [281.454877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [281.456295] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [281.457563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [281.458597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [281.459816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [281.460944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [281.462173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [281.463176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [281.464450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [281.465505] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [281.467035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [281.468590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [281.470129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [281.471694] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [281.473270] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [281.475077] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [281.476629] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [281.478162] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [281.479720] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [281.481272] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [281.482804] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [281.484365] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [281.486286] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [281.487985] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [281.489551] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [281.491081] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [281.492707] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [281.494272] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [281.495871] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [281.497438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [281.498989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [281.500526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [281.502066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [281.503598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [281.505171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [281.506731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [281.508304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [281.509853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [281.511442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [281.512991] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [281.514529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [281.516072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [281.517615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [281.519166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [281.520733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [281.522279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [281.523606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [281.524582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [281.525567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [281.526545] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [281.527515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [281.528483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [281.529467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [281.530445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.531425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [281.532366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [281.533065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [281.533786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [281.534504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [281.535223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [281.535912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [281.536651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [281.537360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [281.538049] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [281.538780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [281.539493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [281.540183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [281.540897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [281.541531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [281.542076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [281.542652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [281.543217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [281.543763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [281.544335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [281.544883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [281.545458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [281.546008] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [281.558292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [281.566534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [281.566947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.567457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.568290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [281.569006] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [281.570039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [281.570294] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [281.570617] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [281.570942] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [281.571284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [281.571607] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [281.571919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [281.572214] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [281.572506] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [281.572889] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [281.573134] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [281.573605] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [281.573929] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (99 ms remaining)

<7> [281.679662] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [281.771335] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.772500] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [281.773640] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [281.822324] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [281.823421] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [281.824424] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [281.825541] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [281.980144] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.981620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.984788] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [281.989168] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [281.990440] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [281.995127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [281.996384] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [282.002506] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [282.004303] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [282.005781] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [282.010529] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [282.011633] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [282.012906] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [282.016414] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [282.017372] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [282.018338] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [282.022028] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [282.022985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [282.024952] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [282.027606] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [282.028709] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [282.030534] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [282.043476] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [282.049364] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [282.050700] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [282.055953] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [282.055331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.061341] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.063586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<6> [282.064822] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [282.065188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [282.066905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [282.068469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [282.068510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [282.069959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [282.076475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [282.076518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [282.078175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.085398] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.088064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [282.089584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [282.091947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [282.093568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [282.093609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [282.095765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [282.102087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [282.102132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [282.202804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.203652] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.216392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.241907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.242318] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.255347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.323313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.325569] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.337888] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.338613] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.340300] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.340977] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.342171] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.342810] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.344353] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.344867] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.345400] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.349989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.440897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.442018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [282.442534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [282.443146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [282.445723] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [282.445964] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [282.447004] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [282.447976] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.449014] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.450033] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [282.452155] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [282.460539] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [282.476535] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [282.477348] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [282.477942] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [282.478596] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [282.479450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [282.480056] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [282.480706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [282.481370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.481959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [282.482678] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.483351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.483941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.484564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.485236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.485934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.486602] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.487286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.487895] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.488539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.489176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [282.489812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [282.490469] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [282.491072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [282.491969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [282.492912] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [282.493564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [282.494329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [282.494969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [282.495631] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [282.496402] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [282.496995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [282.497656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [282.498460] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [282.499054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [282.499788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [282.500577] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [282.501423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [282.502385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [282.503347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [282.504309] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [282.505266] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [282.506079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [282.506847] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [282.508020] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [282.508993] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [282.509946] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [282.510893] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [282.511843] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [282.512530] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [282.513164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [282.514109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [282.516233] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [282.719533] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [282.721804] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [282.730467] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [282.730879] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [282.732009] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [282.732436] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [282.733622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [282.785196] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [282.786333] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [282.787504] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [282.788849] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [282.792177] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [282.792771] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [282.793926] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [282.795321] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [282.797005] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [282.800329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [282.802397] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [282.804191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [282.805964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [282.807674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [282.809432] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [282.811254] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [282.812957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [282.814734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [282.816457] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [282.820078] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [282.900416] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [282.952023] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [282.973370] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [282.982399] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [282.994481] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [283.000168] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [283.030564] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (260 ms remaining)

<7> [283.295646] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [283.378169] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [284.851092] Setting dangerous option force_probe - tainting kernel

<6> [284.863418] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [284.865127] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [284.865705] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [284.865975] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [284.866255] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [284.866661] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [284.867259] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [284.867618] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [284.868864] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [284.869091] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [284.869321] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [284.869636] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [284.869650] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [284.870551] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [284.870608] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [284.870971] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [284.871318] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e7fff], io: n/a

<7> [284.871509] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [284.872327] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [284.872795] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [284.873165] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [284.873549] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [284.873841] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [284.881206] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [284.881534] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [284.881789] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [284.882042] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [284.882388] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.882702] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.882969] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [284.883278] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [284.883595] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [284.883851] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [284.884105] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [284.884462] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [284.884795] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [284.885073] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [284.885421] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [284.885810] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [284.886673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [284.886967] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [284.887515] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [284.887831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [284.888117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [284.888410] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [284.888735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [284.889003] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [284.889301] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [284.889625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [284.889896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [284.890254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [284.890541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [284.890811] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [284.891068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [284.891368] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.891680] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [284.891938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [284.892197] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.892503] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [284.892792] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.893074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [284.893365] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [284.893734] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [284.894116] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [284.894572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.894944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [284.895690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [284.895971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.896254] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [284.896628] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [284.897015] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [284.897531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.897914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.898280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.898601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.898964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [284.899374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [284.899766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [284.900159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [284.901199] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [284.902273] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [284.902606] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [284.902862] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [284.903117] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [284.903845] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [284.904472] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [284.905048] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [284.905437] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [284.905710] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [284.906014] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [284.906293] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [284.906597] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [284.906847] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [284.907093] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [284.907380] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [284.907688] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [284.907937] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [284.908212] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [284.908550] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [284.908798] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [284.909045] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [284.909362] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [284.909736] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [284.910112] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [284.915060] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [284.919002] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [284.919484] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [284.919925] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [284.928206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [284.928629] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [284.929024] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [284.929432] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [284.929954] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [284.930378] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [284.930767] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [284.931152] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [284.931559] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [284.931931] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [284.932687] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [284.933105] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [284.933509] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [284.933872] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [284.934261] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [284.934633] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [284.935052] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [284.935714] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [284.936112] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [284.936531] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.947375] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [284.947708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [284.947961] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [285.153235] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [285.154080] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [285.156140] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [285.160140] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [285.181878] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [285.181925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [285.181951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [285.182474] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [285.184566] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [285.186539] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [285.188952] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [285.191045] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [285.194027] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [285.195945] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [285.197897] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [285.199796] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [285.201750] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [285.203729] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [285.207802] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [285.210010] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [285.216564] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [285.218758] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [285.220714] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [285.225067] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [285.227335] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [285.232325] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [285.234495] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [285.236429] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [285.242385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [285.245484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [285.248547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [285.250832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [285.253124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [285.255476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [285.257749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [285.260025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [285.262344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [285.264619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [285.266903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [285.269168] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [285.270592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [285.271959] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [285.273242] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [285.274484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [285.275733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [285.277141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [285.278358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [285.279223] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [285.280066] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [285.281039] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [285.282011] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [285.282979] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [285.283966] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [285.285948] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [285.286701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [285.287424] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [285.287982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [285.288577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [285.289040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [285.289547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [285.290057] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [285.290514] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [285.291037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [285.291547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [285.292201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [285.292843] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [285.293519] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [285.294132] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [285.294704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [285.295251] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [285.295701] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.296140] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.296544] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [285.297219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [285.297590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [285.297935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [285.298380] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [285.298804] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [285.299081] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [285.299404] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [285.299764] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [285.303148] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [285.303533] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [285.303868] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [285.326528] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [285.326779] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [285.326975] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [285.327207] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [285.327508] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [285.327777] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [285.328040] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [285.328454] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [285.328730] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [285.328993] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [285.329292] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [285.329640] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [285.329916] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [285.330205] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [285.330527] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [285.330789] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [285.331051] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [285.331366] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [285.331674] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [285.332205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [285.332521] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [285.332789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [285.333405] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [285.334029] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [285.334551] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [285.335049] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [285.341396] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [285.342884] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [285.343442] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [285.344482] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [285.347627] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [285.347752] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [285.349124] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [285.352609] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [285.352767] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [285.356990] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [285.357159] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [285.358790] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [285.361384] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [285.361535] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [285.362962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [285.363079] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [285.369348] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [285.406712] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [285.415781] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [285.417899] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [285.422849] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [285.423313] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [285.423714] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [285.424109] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [285.424995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [285.425414] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.425835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [285.426236] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.427411] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [285.427837] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.428608] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.429425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [285.429814] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [285.430245] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [285.432466] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [285.432626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [285.432641] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [285.433088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected

<7> [285.433108] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [285.433130] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [285.433659] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2

<7> [285.433689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [285.433702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [285.434103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [285.434115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [285.434126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [285.434556] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [285.434773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [285.434785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [285.435178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [285.435382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [285.435394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [285.435780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [285.435791] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [285.435800] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [285.435808] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [285.435816] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [285.435824] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [285.435831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [285.435890] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [285.435911] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [285.436026] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [285.436040] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [285.439230] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [285.439701] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [285.440114] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [285.440574] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [285.440988] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [285.441419] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [285.441831] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [285.442254] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [285.442668] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [285.443083] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [285.443505] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [285.443916] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [285.444338] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [285.444751] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [285.445166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [285.445586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [285.445912] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [285.446263] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [285.446666] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [285.447075] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [285.447498] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [285.447909] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [285.448567] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [285.448703] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [285.448719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [285.449119] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [285.449134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [285.449145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [285.449528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [285.449541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [285.449551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [285.449935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [285.449947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [285.449958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [285.450361] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [285.450373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [285.450384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [285.450767] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [285.450779] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [285.450788] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [285.450797] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [285.450806] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [285.450815] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [285.450823] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [285.450880] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [285.450900] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [285.451003] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [285.451034] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [285.451215] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [285.452850] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [285.453324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [285.453757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [285.454180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [285.454819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [285.455256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [285.456028] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [285.456908] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [285.457246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [285.457566] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [285.457854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [285.458166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [285.458507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [285.458826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [285.459149] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [285.459478] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [285.459802] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [285.460124] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [285.460453] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [285.460775] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [285.461097] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [285.461449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [285.461770] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [285.462089] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [285.462429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [285.462747] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [285.463072] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [285.463420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [285.463744] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [285.464065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [285.464415] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [285.464739] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [285.465062] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [285.465408] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [285.465734] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [285.466057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [285.466406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [285.466724] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [285.467042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [285.467379] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [285.467652] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [285.467847] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [285.468038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [285.468262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [285.468571] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [285.468834] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [285.469027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [285.469246] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [285.469504] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [285.469695] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [285.469886] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [285.470077] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [285.470332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [285.470608] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [285.470799] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [285.471000] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [285.471332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [285.471649] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [285.471968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [285.472296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [285.472616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [285.472934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [285.473258] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [285.473572] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [285.473894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [285.474241] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [285.474559] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [285.474882] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [285.475222] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [285.475227] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [285.475231] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [285.489787] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [285.491482] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [285.492026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [285.492910] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [285.499093] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [285.528612] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.528945] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.529252] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [285.529551] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.529778] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.530003] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [285.530299] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.530663] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [285.531025] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [285.563753] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [285.577102] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [285.579247] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [286.816993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.714479] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off

<7> [287.715475] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [287.716401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.717021] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.717431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.717532] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [287.717791] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [287.718053] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [287.718353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.719280] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [287.719656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [287.725194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [287.817112] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [287.842316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [287.850726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [287.851103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.851442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.851842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.852238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.852620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.853004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.853461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.853845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.854554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.855248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.855904] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.869275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.869642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.869935] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.870239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.871054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [287.981792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [287.982083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [287.983086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [287.983750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.985051] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.992586] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.992919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.993149] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.993409] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.993656] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.993875] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.994093] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.994386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.994604] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.995320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [287.996053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [287.996434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [287.996778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [287.997537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [288.071286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [288.071627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [288.072315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [288.072988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [288.073596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [288.073949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [288.074326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [288.074694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [288.075065] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [288.107603] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [288.122280] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [288.129557] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [288.138794] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [288.154069] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [288.155562] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [288.191692] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (25 ms remaining)

<7> [288.218605] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [288.228355] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [289.520327] Setting dangerous option force_probe - tainting kernel

<6> [289.532611] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [289.534419] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [289.534822] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [289.535090] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [289.535381] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [289.535743] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [289.536138] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [289.536394] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [289.537494] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [289.537753] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [289.537960] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [289.538165] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [289.538231] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [289.538872] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [289.538913] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [289.539200] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [289.539467] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e7fff], io: n/a

<7> [289.539662] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [289.540337] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [289.540665] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [289.540979] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [289.541262] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [289.541549] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [289.548193] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [289.548515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [289.548767] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [289.549020] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [289.549369] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.549673] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.549939] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [289.550226] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [289.550509] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [289.550773] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [289.551036] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [289.551325] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [289.551610] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [289.551884] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [289.552179] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [289.552491] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [289.553465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [289.553912] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [289.554350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [289.554774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [289.555211] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [289.555631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [289.556053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [289.556535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [289.556959] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [289.557411] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [289.557819] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [289.558248] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [289.558638] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [289.559036] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [289.559445] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [289.559852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.560274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [289.560685] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [289.561079] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.561491] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [289.561887] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.562291] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [289.562690] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [289.563086] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [289.563508] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [289.563937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.564456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [289.564887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [289.565311] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.565720] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [289.566116] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [289.566520] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [289.567042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.567457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.567862] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [289.568296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.568805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.569219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [289.569624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [289.570028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [289.571294] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [289.572770] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [289.573207] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [289.573609] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [289.573703] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [289.574010] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [289.574897] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [289.574846] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [289.575387] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [289.575775] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [289.576109] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [289.576385] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [289.576641] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [289.576896] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [289.577151] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [289.577452] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [289.577700] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [289.577947] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [289.578228] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [289.578564] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [289.578813] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [289.579060] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [289.579328] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [289.579611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [289.579859] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [289.584837] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [289.590777] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [289.591298] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [289.591729] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [289.599206] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [289.599633] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [289.600025] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [289.600457] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [289.602712] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [289.603106] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [289.603514] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [289.603893] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [289.604292] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [289.604674] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [289.605849] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [289.606159] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.606456] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.606702] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.606945] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.607229] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.607511] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.608153] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.608483] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [289.608766] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.619350] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.619657] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [289.619902] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [289.827046] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.828821] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [289.830555] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [289.834532] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [289.851242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [289.851291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [289.851322] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [289.851804] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.853554] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.855216] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [289.857306] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [289.858989] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [289.860903] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [289.862128] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [289.863289] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [289.864650] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [289.865786] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [289.867129] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [289.869591] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [289.871229] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [289.875247] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.876541] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [289.877673] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [289.880790] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [289.882034] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [289.885136] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [289.886385] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [289.887559] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [289.892025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [289.894105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [289.896108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [289.897410] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [289.898792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [289.900332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [289.901996] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [289.903383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [289.904696] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [289.906014] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [289.907404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [289.908735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [289.909802] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [289.910842] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [289.911626] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [289.912362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [289.913108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [289.914007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [289.914762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [289.915495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [289.916496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [289.917415] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [289.918255] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [289.918842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [289.919495] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [289.920241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [289.920888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [289.921590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [289.922326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [289.922966] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [289.923765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [289.924560] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [289.925356] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [289.926123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [289.926716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [289.927381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [289.927992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [289.928617] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [289.929265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [289.929866] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [289.930321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [289.930850] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [289.931481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.932077] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.932690] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [289.933632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [289.934042] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [289.934597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [289.935226] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [289.935959] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [289.936460] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [289.936905] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [289.937405] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [289.940562] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [289.940909] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [289.941268] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [289.964447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [289.964701] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [289.964899] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [289.965095] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [289.965312] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [289.965686] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [289.966072] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [289.966614] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [289.966994] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [289.967355] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [289.967675] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [289.967932] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [289.968225] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [289.968493] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [289.968746] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [289.969000] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [289.969338] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [289.969725] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [289.970108] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [289.970825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [289.971206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [289.971532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [289.972015] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [289.972714] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [289.973141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [289.973647] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [289.979835] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [289.982375] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [289.982862] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [289.983894] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [289.986826] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [289.987083] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [289.988733] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [289.991426] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [289.991682] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [289.992988] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [289.993106] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [289.994234] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [289.996139] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [289.996305] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [289.997694] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [289.997812] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [290.003613] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [290.037118] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [290.047674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [290.048963] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [290.053727] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.056134] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [290.056588] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [290.056989] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [290.057386] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [290.058074] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [290.058693] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [290.059137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.060220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.060628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.061231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.062648] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [290.062795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.062804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.063137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.066554] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.066568] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.067047] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [290.069434] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.073992] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [290.074517] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.075255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.075650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.078258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.078698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.078710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.079094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.084330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.084410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.084806] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [290.086049] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [290.087859] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [290.087877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [290.088800] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.089275] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.089656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.090013] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.090022] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [290.090028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [290.090056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [290.090422] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.090823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.092948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected

<7> [290.092983] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [290.093606] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [290.093618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.093629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.093642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.094358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.098913] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.098934] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.098946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.100094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.100532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.101119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.101597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.101609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.101992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.105428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.105441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.105883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.105898] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [290.105910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.110460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.110482] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.110495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.111330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.111738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.112327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.112755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.112766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.113155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.117316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.117333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.117833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.117848] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [290.117858] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [290.117866] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [290.117874] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [290.117882] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [290.117944] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [290.117980] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [290.117988] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [290.118020] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [290.118155] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [290.118238] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [290.125096] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [290.127438] fbcon: i915drmfb (fb0) is primary device

<6> [290.130642] Console: switching to colour frame buffer device 200x56

<6> [290.130663] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [290.130856] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [290.130875] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [290.130678] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [290.131120] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [290.131534] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [290.131942] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [290.132371] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [290.132785] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [290.133204] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [290.133778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [290.133586] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [290.133804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [290.134013] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [290.134457] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [290.134656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.134876] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [290.135103] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.135349] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [290.135577] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.135791] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [290.136236] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [290.136621] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [290.136893] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.136906] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [290.136924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [290.136988] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [290.137023] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [290.137460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.137529] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [290.137905] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.137985] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [290.138463] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [290.138860] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [290.139285] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [290.139685] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [290.141712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [290.141735] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.141748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.141761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.141772] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.146402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.146423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.146437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.147883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.148326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.148914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.149662] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [290.150076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [290.150508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [290.150923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [290.152221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [290.152653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.153673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.153687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.154122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.156293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [290.156634] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [290.156953] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [290.157293] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [290.157614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [290.157934] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [290.158267] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [290.158581] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [290.158897] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [290.159257] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [290.159573] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [290.159894] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [290.160234] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [290.160551] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [290.160874] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [290.161210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [290.161531] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [290.161854] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [290.162189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [290.162507] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [290.162822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [290.163141] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [290.163482] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [290.163800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [290.164120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [290.164443] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [290.164764] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [290.165085] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [290.165420] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [290.165736] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [290.166060] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [290.166401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [290.166722] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [290.167046] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [290.167386] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [290.167707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [290.168032] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [290.168368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [290.168685] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [290.169010] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [290.169346] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [290.169660] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [290.169922] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [290.170133] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [290.170364] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [290.170622] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [290.170824] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [290.171016] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [290.171232] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [290.171489] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [290.171681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [290.171872] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [290.172064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [290.172285] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [290.172540] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [290.172733] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [290.172924] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [290.173115] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [290.173328] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [290.173599] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [290.173791] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [290.173982] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [290.174189] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [290.174193] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [290.174196] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [290.175669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.175680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.175994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.176006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [290.176015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.180502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.180523] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.180536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.181211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.181555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.182220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.182561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.182572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.182905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.187702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.187717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.188022] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.188033] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [290.188040] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [290.188046] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [290.188052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [290.188057] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [290.188979] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [290.189028] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [290.189036] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [290.189106] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [290.190332] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [290.190763] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [290.191124] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [290.191597] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [290.191958] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [290.192310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [290.192633] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [290.192999] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [290.193393] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [290.193760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [290.194121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [290.194494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [290.194861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<6> [290.195140] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [290.195227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [290.195589] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [290.195937] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [290.196262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [290.196571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [290.196903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [290.197261] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [290.197620] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [290.197974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [290.198350] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [290.198709] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [290.199060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [290.199392] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [290.199745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [290.200104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [290.200495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [290.200859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [290.201231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [290.201588] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [290.201948] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [290.202319] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [290.202683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [290.203048] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [290.203417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [290.203771] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [290.204066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [290.204371] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [290.204673] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state

<7> [290.204936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [290.205218] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [290.205467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [290.205720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [290.205951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [290.206201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [290.206552] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [290.206900] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [290.207206] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [290.207599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [290.207836] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [290.208061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [290.208383] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [290.208738] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [290.209084] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [290.209448] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [290.210668] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [290.211099] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [290.211673] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [290.212032] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [290.212421] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [290.212782] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [290.213147] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [290.213523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [290.213877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [290.214243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [290.214602] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [290.214961] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [290.215347] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [290.215702] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [290.216059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [290.216433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [290.216788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [290.217151] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [290.217513] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [290.217865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [290.218217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [290.218572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [290.218929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [290.219303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [290.219664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [290.220017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [290.220378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [290.220736] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [290.221095] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [290.221451] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [290.221805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [290.222158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.222537] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.222899] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [290.223267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.223631] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [290.223994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [290.224366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [290.224720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [290.225077] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [290.225450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [290.225808] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [290.226158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [290.226525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [290.226878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [290.227237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.227567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.227898] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [290.228190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [290.228539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [290.228827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [290.229062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [290.229317] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [290.229568] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [290.229799] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [290.231267] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [290.232761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [290.233062] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [290.233455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [290.233818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [290.234185] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [290.234531] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [290.234873] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [290.235105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [290.235440] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [290.236613] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [290.237006] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [290.237795] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [290.238332] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [290.238741] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [290.248215] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.248601] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [290.248994] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [290.451119] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.451868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [290.452970] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.455574] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [290.456266] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [290.457809] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [290.458339] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [290.458822] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [290.461014] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [290.461704] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [290.462352] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [290.464864] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [290.465737] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [290.466496] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [290.468961] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [290.469928] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [290.472965] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [290.475715] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [290.476889] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [290.478615] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [290.483334] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 359 us, max time under evasion is 250 us

<7> [290.492642] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [290.502753] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [290.504667] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [290.508943] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [290.518053] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [290.518714] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [290.518832] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [290.518870] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [290.519425] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [290.519497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [290.522050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.522099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.523992] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.525530] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.529365] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.529425] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [290.529469] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [290.529626] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [290.533109] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [290.534240] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.535978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.538949] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [290.546302] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [290.546368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.546426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.546483] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.546534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.553567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.553643] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.553697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.559450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.561291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.566249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.568381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.568412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.569459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.574579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.574614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.575779] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.575819] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [290.575852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.582335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.582370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.582394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.583286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.583985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.584939] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.585732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.585753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.586543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.590479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.590500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.591106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.591126] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [290.591141] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [290.591154] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [290.591187] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [290.591200] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [290.591286] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [290.591335] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [290.591350] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [290.592128] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [290.592537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [290.592557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [290.593530] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [290.593796] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.594390] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.594916] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.595520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.595534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [290.595545] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [290.595591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [290.596020] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.596493] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.599135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [290.599152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.599211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.599386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.599400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.604280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.604419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.604430] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.605267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.605708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.609238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.609756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.609768] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.610147] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.614207] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.614550] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.614791] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [290.615016] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.615263] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.615625] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [290.615967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.615854] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.615980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.616199] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.616403] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.616544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [290.616585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [290.616555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.623321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.623449] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.623468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.624109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.624484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.625104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.625623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.625635] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.625988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.629448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.629544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.629997] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.639021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.639038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [290.643705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.644742] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.644756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.645647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.646039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.646758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.647146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.647157] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.647778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.651196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.651210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.651638] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.652871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [290.652891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [290.657563] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.658587] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.658600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.659283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.659641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.660161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.660562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.660572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.660924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.664159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.664195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.664583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.665313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [290.665326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [290.665748] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [290.666096] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [290.666475] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [290.666875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [290.666887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [290.666895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [290.666938] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [290.667312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [290.667634] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [290.669304] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [290.669317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [290.669328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [290.669376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [290.669385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<6> [290.671966] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [290.674258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [290.674313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [290.674324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [290.674958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.675326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [290.675831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [290.676336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.676347] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.676687] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [290.679874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [290.679888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [290.680544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [290.680594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<6> [290.680732] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<7> [290.680605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<6> [290.684211] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [290.685091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [290.685145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [290.685156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [290.685917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.686287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [290.686788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [290.687144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.687155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [290.688640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [290.692216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [290.692231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [290.692645] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [290.693451] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142]

<7> [291.739991] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [291.740605] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [291.741746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [291.742735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [291.743907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [291.744903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [291.745466] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [291.745706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [291.745945] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.746214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [291.746506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.746746] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.746984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.747241] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.747518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.747757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.748001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.748260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.748546] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.748787] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.749027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [291.749290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [291.749569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [291.749808] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [291.750047] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [291.750304] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [291.750583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [291.750826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [291.751078] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [291.751353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [291.751593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [291.751831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [291.752073] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [291.752330] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [291.752629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [291.752870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [291.753110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [291.753370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [291.753683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [291.753933] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [291.754200] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [291.754483] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [291.754767] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [291.755026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [291.755281] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [291.755552] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [291.755785] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.756024] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.756287] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [291.756594] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [291.756866] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [291.757151] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [291.757434] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [291.757702] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [291.757934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [291.758183] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [291.758478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [291.758712] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [291.759109] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [291.760544] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [291.945618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [291.968356] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [291.969798] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [291.979073] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [291.979600] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [291.980229] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [291.980911] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [291.981630] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [292.033202] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [292.033261] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.034610] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [292.035574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [292.035820] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [292.041516] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [292.041896] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [292.042874] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [292.043670] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [292.045076] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [292.048027] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [292.049089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [292.049976] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [292.051135] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [292.052064] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [292.053122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [292.054106] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [292.055571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [292.056682] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [292.057816] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [292.059870] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [292.062498] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [292.063474] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [292.167861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [292.169669] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [292.170919] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [292.172374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [292.175404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [292.192274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [292.282772] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [292.284034] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [292.285038] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [292.286143] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [292.287238] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [292.288023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [292.289034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [292.290120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [292.291925] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [292.294094] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [292.295499] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [292.296710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [292.297782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.298811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [292.299959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.300885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.301810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.302836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.303853] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.304815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.305975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.307360] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.308389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.309397] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.310369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [292.311380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [292.312381] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [292.313351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [292.314500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [292.315590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [292.317017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [292.318367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [292.319626] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [292.320705] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [292.321919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [292.322924] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [292.324120] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [292.325208] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [292.326459] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [292.327759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [292.329040] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [292.330076] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [292.331355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [292.332384] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [292.333628] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [292.334957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [292.336039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [292.337136] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [292.338348] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [292.339869] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [292.341385] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [292.342883] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [292.344692] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [292.346332] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [292.347349] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [292.348821] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [292.350334] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [292.351789] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [292.353125] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [292.354454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [292.355411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [292.356303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [292.357345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [292.358683] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [292.359998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [292.361325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [292.362645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [292.363911] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [292.365094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [292.366103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [292.367426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [292.368759] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [292.370074] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [292.371405] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [292.372719] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [292.373793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [292.374913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [292.376266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [292.377584] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [292.378922] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [292.380234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [292.381398] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [292.382455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [292.383802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.385128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [292.386459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.387787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [292.388830] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [292.389551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [292.390104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [292.390863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [292.391744] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [292.392626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [292.393501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [292.394371] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [292.395048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [292.395635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [292.396517] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.397356] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.397997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [292.398650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [292.399275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [292.399681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [292.400122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [292.400793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [292.401459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [292.402098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [292.414287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [292.424034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [292.424499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [292.425150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [292.425940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [292.426730] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [292.427720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [292.428115] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [292.428542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [292.428912] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [292.429298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [292.429668] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [292.430038] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [292.430431] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [292.430801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [292.431455] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [292.431846] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [292.432520] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [292.433031] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (102 ms remaining)

<7> [292.543400] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [292.553307] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.553670] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [292.554032] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [292.604176] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [292.605274] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [292.606276] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [292.607389] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [292.756120] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [292.757428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [292.758718] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.761708] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [292.763408] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [292.770775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [292.772031] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [292.775766] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [292.777250] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [292.778805] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [292.782687] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [292.784227] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [292.785531] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [292.790940] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.792328] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.793776] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.797687] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [292.799231] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [292.800689] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [292.804124] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [292.805485] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [292.807870] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [292.810781] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [292.811804] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [292.813387] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [292.817518] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 312 us, max time under evasion is 250 us

<7> [292.826721] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [292.832576] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [292.834502] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [292.839607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [292.841072] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [292.847218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [292.848801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.850104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [292.852266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [292.853650] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.853686] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.855682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [292.862141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [292.862218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [292.868799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [292.875419] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [292.876693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.877713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [292.879002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [292.880088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.880115] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [292.880965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [292.885323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [292.885343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [292.976891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [292.977734] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [292.990344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.015754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.016087] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [293.029344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.074799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.075771] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [293.084012] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.084361] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.084628] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [293.084887] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.085139] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.085421] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [293.085838] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [293.086551] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [293.086972] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [293.088111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [293.170237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [293.171103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [293.171576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [293.172260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [293.176333] Console: switching to colour dummy device 80x25

<7> [293.177625] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [293.177812] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [293.178524] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [293.179199] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.179967] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.180834] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [293.184340] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [293.193627] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [293.197579] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [293.198311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [293.198978] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [293.199739] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [293.200436] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [293.201103] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [293.201798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [293.202797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.203683] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [293.204538] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.205387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.206228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.206979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.207576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.208458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.209387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.210322] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.211110] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.212084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.213006] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [293.213710] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [293.214309] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [293.215093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [293.215917] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [293.216731] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [293.217540] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [293.218345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [293.218952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [293.219502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [293.220367] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [293.221210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [293.221997] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [293.222814] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [293.223671] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [293.224446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [293.225133] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [293.225969] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [293.226786] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [293.227609] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [293.228433] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [293.229138] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [293.230042] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [293.231065] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [293.232109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [293.232938] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [293.233769] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [293.234585] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [293.235472] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [293.236300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [293.237103] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [293.237941] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [293.239779] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [293.447502] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [293.450052] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [293.463568] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [293.463749] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [293.464733] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [293.464883] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [293.465896] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [293.517241] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [293.517854] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [293.518354] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [293.519437] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [293.519959] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [293.520576] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [293.522991] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [293.523048] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [293.524852] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [293.528800] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [293.530880] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [293.532662] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [293.534394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [293.536078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [293.537879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [293.539676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [293.541456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [293.543118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [293.544870] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [293.548492] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [293.612975] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [293.660561] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [293.671342] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [293.680036] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [293.690337] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [293.695192] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [293.717461] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (302 ms remaining)

<7> [294.023738] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [294.054359] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [294.725672] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [294.727230] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload