igt@i915_pm_rpm@system-suspend-execbuf on shard-rkl@CI_DRM

Detail	Value
Duration	19.41 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-CI_DRM_17729-g373a53bd0fb5+ x86_64)
Out	Using IGT_SRANDOM=1766516876 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888117ffd818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: system-suspend-execbuf [cmd] rtcwake: assuming RTC uses UTC ... [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Tue Dec 23 19:08:13 2025 Subtest system-suspend-execbuf: SUCCESS (19.411s)
Err	Starting subtest: system-suspend-execbuf Subtest system-suspend-execbuf: SUCCESS (19.411s)
Dmesg	<6> [123.920223] Console: switching to colour dummy device 80x25 <6> [123.920323] [IGT] i915_pm_rpm: executing <7> [123.929140] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [123.929746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [123.929754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [123.934014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [123.934055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] <7> [123.934061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [123.959953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [123.959961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [123.959963] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [123.959966] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [123.960204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [123.960327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [123.960668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [123.960791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [123.961162] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [123.961168] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [123.961172] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [123.961178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes: <7> [123.961181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [123.961184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [123.961187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [123.961190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [123.961193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [123.961195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [123.961198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [123.961201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [123.961204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [123.961207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [123.961210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [123.961212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [123.961215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [123.961218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [123.961221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [123.961224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [123.961226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [123.961229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [123.961232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [123.961235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [123.961237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [123.961240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [123.961243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [123.961246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [123.961249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [123.961251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [123.961254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [123.961257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [123.961260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [123.961263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [123.961265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [123.961313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [123.961317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [123.965495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [123.965527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [123.965530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [123.969734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [123.973379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [123.973385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [123.977598] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [123.977977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [123.977981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [123.982195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [123.982436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [123.982439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [123.986662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [123.986959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [123.986963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [123.991138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [123.991149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] <7> [123.991153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [124.017059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [124.017066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [124.017069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [124.017072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [124.017311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [124.017430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [124.017777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [124.017908] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [124.018280] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [124.018285] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [124.018289] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [124.018294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes: <7> [124.018297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [124.018300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [124.018303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [124.018306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [124.018309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [124.018312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [124.018314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [124.018317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [124.018320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [124.018323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [124.018326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [124.018328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [124.018331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [124.018334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [124.018337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [124.018340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [124.018342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [124.018345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [124.018348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [124.018351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [124.018353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [124.018356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [124.018359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [124.018362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [124.018365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [124.018367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [124.018370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [124.018373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [124.018376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [124.018378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [124.018381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [124.018402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [124.018405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [124.022622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [124.022635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [124.022637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [124.026845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [124.027122] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:415] <7> [125.041444] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A] <7> [125.041701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [125.042359] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [125.042941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [125.043501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [125.044081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [125.044638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [125.045219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [125.045706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [125.045842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [125.045973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [125.046104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [125.046233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [125.046364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [125.046496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [125.046630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [125.046761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [125.046901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [125.047033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [125.047164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [125.047296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [125.047428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [125.047557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [125.047688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [125.047822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [125.047951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [125.048080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [125.048210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [125.048343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [125.048474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [125.048606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [125.048736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [125.048873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [125.049004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [125.049135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [125.049266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [125.049396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [125.049525] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [125.049656] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [125.049787] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7> [125.049957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [125.050087] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [125.050234] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [125.050362] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [125.050491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [125.050621] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [125.050751] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [125.050886] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [125.051031] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [125.051166] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [125.051315] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [125.051460] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [125.051596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset] <7> [125.051729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [125.051870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [125.052004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [125.052138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [125.052270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [125.052400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [125.062199] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [125.082987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [125.083606] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [125.084336] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [125.084989] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [125.085569] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [125.086165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [125.086763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [125.087358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [125.087916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [125.088469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [125.089059] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [125.089863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.090456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [125.091033] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [125.092241] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B] <7> [125.092632] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C] <7> [125.198119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [125.198755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.199405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.201250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.201944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.205400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.206712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.206945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.207222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.207356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.207525] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [125.296140] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf <7> [125.297284] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A] <7> [125.309007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.309377] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.310012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.310628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.311318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [125.311999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [125.312651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [125.313332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [125.313973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.314619] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [125.315214] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.315946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.318012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.318572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.328911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.329090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.329384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [125.330223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.331724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [125.331945] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B] <7> [125.336083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [125.340002] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C] <7> [125.353868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [125.354115] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.354263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.367797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [125.367805] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [125.367815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [125.367817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [125.368993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [125.369127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [125.370208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [125.370335] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [125.370358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [125.375129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [125.379996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.380173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.380311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [125.381127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.401021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [125.401225] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.401400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.402729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.403033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.407625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.409046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.409474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.409979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.410313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.410688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [125.560093] PM: suspend entry (s2idle) <6> [125.565307] Filesystems sync: 0.004 seconds <6> [125.576323] Freezing user space processes <6> [125.579054] Freezing user space processes completed (elapsed 0.002 seconds) <6> [125.579120] OOM killer disabled. <6> [125.579125] Freezing remaining freezable tasks <6> [125.580616] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) <7> [135.661776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [135.905673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.905887] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [135.906031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [135.906204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [135.906429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.906644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.906842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.907038] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [135.907221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [135.907616] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [135.907761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [135.908179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [135.908920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.909056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.917637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.917789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.922995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [135.968884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [135.968895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [135.968898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [135.968903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [135.970106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [135.970251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [135.971353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [135.971486] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [135.971509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [135.976233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [135.981351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [135.985973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [136.031404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [136.031413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [136.031416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [136.031418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [136.032639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [136.032773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [136.033835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [136.033968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [136.033990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [136.038742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [136.043620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.995967] GFP mask restricted <6> [138.004125] e1000e: EEE TX LPI TIMER: 00000000 <6> [138.004297] e1000e: EEE TX LPI TIMER: 00000011 <7> [138.027086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.027429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.028346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.029753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [138.030677] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [138.034733] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [138.034744] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [138.042601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [138.042768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.042911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.043044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.044318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.045739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.045890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.046675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.048051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [138.048254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [138.048489] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0 <7> [138.050171] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <3> [138.073897] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [138.425090] PM: suspend of devices complete after 429.119 msecs <7> [138.425094] PM: start suspend of devices complete after 529.039 msecs <7> [138.440846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [138.441137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [138.441283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.441429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.441591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.442889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.444123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.445535] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [138.446220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [138.446571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [138.446793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [138.447238] PM: late suspend of devices complete after 22.141 msecs <6> [138.458900] ACPI: EC: interrupt blocked <7> [138.656968] PM: noirq suspend of devices complete after 208.401 msecs <6> [138.657010] ACPI: \_SB_.PR00: LPI: Device not power manageable <6> [138.657021] ACPI: \_SB_.PR01: LPI: Device not power manageable <6> [138.657027] ACPI: \_SB_.PR02: LPI: Device not power manageable <6> [138.657033] ACPI: \_SB_.PR03: LPI: Device not power manageable <6> [138.657038] ACPI: \_SB_.PR04: LPI: Device not power manageable <6> [138.657044] ACPI: \_SB_.PR05: LPI: Device not power manageable <6> [138.657050] ACPI: \_SB_.PR06: LPI: Device not power manageable <6> [138.657055] ACPI: \_SB_.PR07: LPI: Device not power manageable <6> [138.657061] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable <6> [138.657072] ACPI: \_SB_.PR08: LPI: Device not power manageable <6> [138.657078] ACPI: \_SB_.PR09: LPI: Device not power manageable <6> [138.657084] ACPI: \_SB_.PR10: LPI: Device not power manageable <6> [138.657089] ACPI: \_SB_.PR11: LPI: Device not power manageable <6> [138.657095] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable <6> [138.657102] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable <6> [138.660374] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off <7> [138.789542] PM: Triggering wakeup from IRQ 9 <6> [138.793547] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry <7> [138.793552] PM: suspend-to-idle <7> [138.793738] ACPI: EC: ACPI EC GPE status set <7> [138.793800] ACPI: PM: Rearming ACPI SCI for wakeup <7> [140.950643] Timekeeping suspended for 1.829 seconds <7> [140.951389] PM: Triggering wakeup from IRQ 9 <7> [140.951606] ACPI: PM: ACPI fixed event wakeup <7> [140.951609] PM: resume from suspend-to-idle <6> [141.094281] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit <6> [141.097156] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on <6> [141.097845] ACPI: EC: interrupt unblocked <7> [141.466617] PM: noirq resume of devices complete after 369.460 msecs <7> [141.474449] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08 <7> [141.475090] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [141.475848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [141.476623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [141.477509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.478294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.479178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.480072] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [141.481036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [141.482002] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [141.482871] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [141.484415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [141.486502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.487086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.487722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [141.488368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [141.488704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [141.489180] PM: early resume of devices complete after 15.875 msecs <7> [141.496717] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [141.496881] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [141.497337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: disabled <7> [141.497585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7> [141.497818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7> [141.497964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [141.498112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [141.498269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [141.498413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [141.498555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [141.498699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [141.498841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7> [141.498981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7> [141.499125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7> [141.499267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7> [141.499408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7> [141.499550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7> [141.499695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7> [141.499838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7> [141.499994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7> [141.500145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7> [141.500285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7> [141.500426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7> [141.500572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:387:DDI B/PHY B] hw state readout: disabled, pipe A <7> [141.500712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:397:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [141.500852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:401:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [141.500980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7> [141.501107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7> [141.501275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7> [141.501421] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [141.501570] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [141.501717] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [141.502038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:388:HDMI-A-1] hw state readout: disabled <7> [141.502206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:398:HDMI-A-2] hw state readout: disabled <7> [141.502357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:402:DP-1] hw state readout: disabled <7> [141.502508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:410:HDMI-A-3] hw state readout: disabled <7> [141.502637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [141.502765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [141.502912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [141.503088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [141.503284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [141.503448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [141.503577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [141.503707] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7> [141.503835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7> [141.503988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7> [141.504186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7> [141.504367] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7> [141.504550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7> [141.504695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7> [141.504870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7> [141.505003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7> [141.505140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7> [141.505277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7> [141.505468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7> [141.505646] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7> [141.505821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7> [141.505997] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [141.506184] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [141.506350] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [141.506514] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [141.506696] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [141.506880] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [141.507128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [141.507295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7> [141.507430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7> [141.507764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [141.507954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [141.508144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.508338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [141.508529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.508699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [141.508877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state <7> [141.509054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [141.509283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.509472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [141.509664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.509849] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [141.510034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:385:pipe C] fastset requirement not met in dpll_hw_state <7> [141.510229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [141.510416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.510573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [141.510749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [141.510932] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset <7> [141.511185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [141.511355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset] <7> [141.511527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [141.511713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [141.511903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [141.512081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [141.512271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [141.512449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [141.512614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [modeset] <7> [141.512748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:151:plane 1B] fb: [NOFB], visible: no <6> [141.512944] serial 00:02: activated <7> [141.512886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [141.513072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [141.513219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [141.513353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [141.513490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [141.513647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [modeset] <7> [141.513777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:269:plane 1C] fb: [NOFB], visible: no <7> [141.513905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:299:plane 2C] fb: [NOFB], visible: no <7> [141.514033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:329:plane 3C] fb: [NOFB], visible: no <7> [141.514173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:359:plane 4C] fb: [NOFB], visible: no <7> [141.514302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:369:plane 5C] fb: [NOFB], visible: no <7> [141.514433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:379:cursor C] fb: [NOFB], visible: no <7> [141.514855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [141.514991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [141.515127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [141.515265] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [141.515395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [141.515535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [141.515670] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:388:HDMI-A-1] <7> [141.515837] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [141.515997] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:402:DP-1] <7> [141.516208] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:410:HDMI-A-3] <7> [141.516428] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [141.516688] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7> [141.516923] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7> [141.517962] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <7> [141.518104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [141.523327] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0 <7> [141.523368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <6> [141.523869] nvme nvme0: 12/0/0 default/read/poll queues <7> [141.527930] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [141.532192] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [141.532209] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <3> [141.547416] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [141.549236] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [141.549246] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [141.549249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [141.549251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [141.549458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [141.549586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [141.549885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [141.550010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [141.550033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [141.554229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [141.602277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [141.602499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [141.602713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.602912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.603100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.604497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <3> [141.738337] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <6> [141.801778] ata3: SATA link down (SStatus 4 SControl 300) <6> [141.801815] ata2: SATA link down (SStatus 4 SControl 300) <6> [141.810037] ata4: SATA link down (SStatus 4 SControl 300) <7> [142.112172] PM: resume of devices complete after 622.977 msecs <7> [142.112817] GFP mask restored <3> [142.115139] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <6> [142.116933] OOM killer enabled. <6> [142.116939] Restarting tasks: Starting <7> [142.117480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.117798] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [142.118056] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <6> [142.119241] Restarting tasks: Done <6> [142.119305] efivarfs: resyncing variable state <6> [142.119480] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) <6> [142.121774] efivarfs: finished resyncing variable state <5> [142.121811] random: crng reseeded on system resumption <6> [142.122039] PM: suspend exit <7> [142.123228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.124578] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.124883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.125184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.125327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.125502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.236296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.236668] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.237300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.238033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.238775] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.239535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.240211] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.240965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.241646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.243789] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [142.244451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.245643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.247661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.248255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.257315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.257484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.257727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [142.262333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [142.292901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.292911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.292914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [142.292916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [142.293125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.293249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [142.293551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.293678] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.293700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [142.298973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [142.402473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.403092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.409065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.410514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.411181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.411865] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.412411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.412969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.477309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.477675] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.478320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.478930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.479624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.480297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.480938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.481611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.482238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.482878] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [142.483464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.484171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.486184] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.486735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.495816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.496092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.496528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [142.501220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [142.531983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.531992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.531994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [142.531997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [142.532199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.532325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [142.532632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.532760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.532781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [142.538002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [142.610385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.611060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.617064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.618533] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.619268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.620032] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.620659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.621314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.710316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.710688] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.711331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.711944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.712639] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.713319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.713962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.714640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.715269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.715912] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [142.716512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.717242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.719246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.719800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.728911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.729161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.729550] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [142.734381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [142.766302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.766311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.766314] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [142.766316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [142.766517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.766637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [142.766936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.767059] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.767080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [142.772308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [142.842334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.842953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.850070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.851584] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [142.852286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [142.853019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [142.853651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [142.854336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.942293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.942669] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [142.943308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [142.943922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [142.944612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.945286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.945926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.946598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [142.947220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [142.947869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [142.948465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [142.949346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [142.950019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.950164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.957559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.957742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.958009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [142.962650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [142.994974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [142.994982] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [142.994985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [142.994988] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [142.995830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.995952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [142.996267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [142.996397] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.996418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [143.000730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [143.098397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.099015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.106158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.107671] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.108360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.109153] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.109778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.110445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.171281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.171653] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.172300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.172967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.173710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.174419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.175063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.175774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.176457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.177121] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [143.177259] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.177551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.178235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.178367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.184499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.184598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.184736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [143.189469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [143.221383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [143.221392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [143.221395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [143.221398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [143.221604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.221726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [143.222035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.222558] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.222604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [143.227487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [143.298476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.299160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.306323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.307776] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.308484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.309209] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.309791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.310422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.398289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.398661] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.399316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.399974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.400718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.401441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.402086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.402801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.403455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.404177] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [143.404768] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.405552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.407588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.408185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.418484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.418673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.418945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [143.423622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [143.454321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [143.454330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [143.454333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [143.454335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [143.454543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.454666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [143.454972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.455112] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.455344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [143.460295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [143.562451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.563857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.569738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.571205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.571911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.572685] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.573275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.573882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.632846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.633280] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.633866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.634520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.635199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.635854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.636533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.637186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.637803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.638512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [143.638644] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.638884] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.639563] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.639696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.645829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.645927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.646065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [143.650803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [143.680540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [143.680549] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [143.680552] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [143.680555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [143.680756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.680881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [143.681192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.681321] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.681343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [143.686392] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [143.754500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.755071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.761039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.762465] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [143.763146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [143.763863] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [143.764459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [143.765049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.860308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.860684] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [143.861326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [143.861938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [143.862644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.863327] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.863969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.864658] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [143.865290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [143.865939] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [143.866411] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [143.866648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [143.867329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.867468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.874872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.875057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.875345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [143.880019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [143.911399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [143.911409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [143.911413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [143.911415] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [143.911624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.911752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [143.912058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [143.912216] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.912238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [143.916785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [144.018555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.019273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.023947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.025291] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.025526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.025804] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.025941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.026122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.092278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.092645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.093272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.093895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.094591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.095267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.095914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.096589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.097233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.097880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.098500] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.099217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.100017] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.100158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.108778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.108959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.109234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [144.113834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [144.144759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.144767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.144770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [144.144773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [144.144977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.145111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [144.145423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.145551] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [144.145572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [144.150501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [144.218323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.218889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.224850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.226327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.227028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.227829] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.228416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.229020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.322261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.322633] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.323264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.323879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.324575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.325252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.325890] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.326564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.327203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.327862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.328453] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.329185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.331199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.331760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.340847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.341108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.341521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [144.347532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [144.379374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.379383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.379386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [144.379388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [144.379593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.379717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [144.380024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.380480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [144.380523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [144.385436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [144.450376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.450847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.456847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.458371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.459061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.459898] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.460520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.461168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.554267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.554639] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.555277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.555891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.556583] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.557264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.557908] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.558571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.559197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.559843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.560427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.561152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.563155] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.563710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.573960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.574282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.574566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [144.579162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [144.609757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.609766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.609769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [144.609772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [144.609973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.610109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [144.610422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.610549] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [144.610571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [144.615823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [144.714379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.715055] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.721019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.722405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.722635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.722914] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.723050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.723239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [144.789253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [144.789618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [144.790259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [144.790878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [144.791571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.792256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.792898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.793565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [144.794194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [144.794837] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [144.795430] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [144.795929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [144.796600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [144.796732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [144.804128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [144.804322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [144.804595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [144.809187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [144.841613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [144.841622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [144.841625] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [144.841627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [144.841830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.841951] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [144.842354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [144.842481] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [144.842502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [144.847267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [144.914353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [144.915025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [144.922243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [144.923755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [144.924444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [144.925222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [144.925837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [144.926501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.018271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.018640] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.019280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.019892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.020594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.021272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.021919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.022608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.023243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.023889] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.024484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.025209] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.027213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.027764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.036865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.037115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.037500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [145.042348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [145.073083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.074138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.074141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [145.074143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [145.074353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.074473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [145.074788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.074915] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [145.074935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [145.079135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [145.146274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.146948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.154116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.155645] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.156388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.157177] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.157799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.158460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.251262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.251632] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.252274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.252888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.253583] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.254261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.254901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.255576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.256203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.256843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.257451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.258185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.260190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.260742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.269841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.270141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.270600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [145.275359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [145.306052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.306069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.306072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [145.306074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [145.306284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.306407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [145.306715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.306841] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [145.306862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [145.312075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [145.378310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.378978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.384953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.386346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.386600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.386879] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.387015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.387206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.483249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.483617] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.484248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.484868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.485562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.486237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.486888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.487564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.488203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.488855] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.489441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.490161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.491047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.491194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.498571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.498716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.498921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [145.503521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [145.532904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.532913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.532916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [145.532919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [145.533125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.533250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [145.533571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.533697] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [145.533719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [145.538947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [145.611181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.611855] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.617799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.619147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.619405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.619743] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.619942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.620198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.712245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.712613] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.713254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.713869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.714567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.715318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.716015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.716722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.717376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.718020] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.718618] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.719344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.721353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.721908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.731022] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.731303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.731646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [145.736343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [145.766995] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [145.767004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [145.767007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [145.767009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [145.767208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.767331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [145.767635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [145.767763] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [145.767784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [145.773039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [145.842345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [145.843027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [145.850244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [145.852037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [145.853179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [145.854250] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [145.855083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [145.855970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [145.945246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [145.945618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [145.946286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [145.946899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [145.947600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.948280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.948920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.949593] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [145.950265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [145.950906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [145.951500] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [145.952218] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [145.954227] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [145.954786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [145.963884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [145.964131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [145.964526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [145.969370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [146.001216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.001225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.001228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [146.001230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [146.001429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.001552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [146.001855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.001979] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [146.002000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [146.007277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [146.074240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.074815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.082000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.083885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.084970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.086178] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.087100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.088021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.177230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.177602] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.178234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.178852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.179681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.180455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.181139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.181921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.182639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.183460] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.184106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.184848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.187083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.187679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.199234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.199398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.199633] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [146.204225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [146.234981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.234990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.234993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [146.234995] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [146.236131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.236256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [146.236567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.236693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [146.236714] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [146.241023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [146.338210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.338886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.344926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.346273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.346601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.346924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.347073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.347309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.417196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.417567] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.418194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.418803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.419500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.420178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.420818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.421491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.422119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.422772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.423359] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.424069] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.426068] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.426620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.435697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.435972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.436401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [146.441101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [146.470886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.470895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.470897] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [146.470900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [146.471776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.471901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [146.472203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.472332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [146.472353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [146.476687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [146.546251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.546925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.554125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.555931] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.557064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.558125] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.558944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.559948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [146.649225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.649600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.650253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.650936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.651676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.652387] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.653026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.653737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.654395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.655067] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.655309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.655551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.656235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.656372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.662509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.662611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.662747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [146.667480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [146.699384] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.699393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.699396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [146.699399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [146.699601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.699723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [146.700031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.700526] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [146.700564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [146.705367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [146.770276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [146.770773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [146.777963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.779845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [146.780959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [146.782109] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [146.782950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [146.783936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [146.865075] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS <7> [146.869110] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:398:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [146.869737] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [146.870322] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [146.870922] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:397:DDI TC1/PHY C] [CRTC:149:pipe A] <7> [146.871521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [146.872137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [146.872712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [146.873329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [146.873920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [146.874541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [146.875146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [146.875692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [146.876347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [146.876907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [146.877536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [146.878141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [146.878689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [146.879282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [146.879865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [146.880423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [146.880870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [146.881336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [146.881779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [146.882244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [146.882695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [146.883165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [146.883500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [146.883826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [146.884176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [146.884512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [146.884829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [146.885420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [146.885737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [146.886089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [146.886370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [146.886592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [146.886815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [146.887057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [146.887294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [146.887513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [146.887735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [146.887956] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [146.888261] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [146.888485] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [146.888709] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [146.888930] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [146.889175] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [146.889372] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [146.889520] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [146.889668] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [146.889832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 559716 num active planes 1 <7> [146.889986] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [146.890152] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [146.890330] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [146.890495] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [146.890647] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7> [146.890803] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7> [146.890963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7> [146.891134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [146.891296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [146.891446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [146.891589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [146.891721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [146.891852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [146.891984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [146.892126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [146.892265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [146.892396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [146.892525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [146.892654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [146.892783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [146.892912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [146.893050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [146.893190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [146.893320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [146.893448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [146.893575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [146.893703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [146.893832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [146.893959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [146.894101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [146.894241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [146.894370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [146.894498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.894624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.894752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.894883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [146.895016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [146.895192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.895325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.895453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [146.895583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [146.895714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [146.895845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:414] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [146.895977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [146.896121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [146.896261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [146.896390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [146.896520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [146.896649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [146.896779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [146.908322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [146.908408] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [146.908562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [146.908738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [146.908969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.909216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.909417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.909621] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [146.909802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [146.910239] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [146.910378] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [146.910826] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [146.911531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [146.911665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [146.919015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [146.919310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [146.919516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [146.920254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [146.921647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [146.921802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [146.921937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [146.922084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [146.922224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [146.922355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [146.922485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [146.922653] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [146.922877] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [146.923013] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [146.923225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [146.923397] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [146.924201] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [146.924338] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [146.943458] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [146.943907] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [146.946094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [146.946670] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [146.947245] [IGT] i915_pm_rpm: exiting, ret=0 <6> [146.963463] Console: switching to colour frame buffer device 240x67 <7> [146.963481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <6> [146.974303] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None <7> [146.989707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [146.989717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [146.989720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k <7> [146.989729] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0 <7> [146.989935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.990097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [146.990424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [146.990552] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [146.990577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [147.000375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [123.929746] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [123.929754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [123.934014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [123.934055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2]

<7> [123.934061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [123.959953] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [123.959961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [123.959963] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [123.959966] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [123.960204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [123.960327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [123.960668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [123.960791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [123.961162] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [123.961168] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [123.961172] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [123.961178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes:

<7> [123.961181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [123.961184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [123.961187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [123.961190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [123.961193] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [123.961195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [123.961198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [123.961201] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [123.961204] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [123.961207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [123.961210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [123.961212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [123.961215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [123.961218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [123.961221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [123.961224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [123.961226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [123.961229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [123.961232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [123.961235] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [123.961237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [123.961240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [123.961243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [123.961246] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [123.961249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [123.961251] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [123.961254] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [123.961257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [123.961260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [123.961263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [123.961265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [123.961313] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [123.961317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [123.965495] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [123.965527] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [123.965530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [123.969734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [123.973379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [123.973385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [123.977598] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [123.977977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [123.977981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [123.982195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [123.982436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [123.982439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [123.986662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [123.986959] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [123.986963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [123.991138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [123.991149] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2]

<7> [123.991153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [124.017059] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [124.017066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [124.017069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [124.017072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [124.017311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [124.017430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [124.017777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [124.017908] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [124.018280] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [124.018285] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [124.018289] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [124.018294] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes:

<7> [124.018297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [124.018300] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [124.018303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [124.018306] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [124.018309] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [124.018312] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [124.018314] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [124.018317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [124.018320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [124.018323] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [124.018326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [124.018328] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [124.018331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [124.018334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [124.018337] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [124.018340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [124.018342] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [124.018345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [124.018348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [124.018351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [124.018353] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [124.018356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [124.018359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [124.018362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [124.018365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [124.018367] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [124.018370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [124.018373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [124.018376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [124.018378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [124.018381] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [124.018402] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [124.018405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [124.022622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [124.022635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [124.022637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [124.026845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [125.041444] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]

<7> [125.041701] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [125.042359] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [125.042941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [125.043501] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [125.044081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [125.044638] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [125.045219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [125.045706] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [125.045842] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [125.045973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [125.046104] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [125.046233] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [125.046364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [125.046496] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [125.046630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [125.046761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [125.046901] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [125.047033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [125.047164] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [125.047296] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [125.047428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [125.047557] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [125.047688] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [125.047822] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [125.047951] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [125.048080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [125.048210] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [125.048343] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [125.048474] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [125.048606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [125.048736] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [125.048873] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [125.049004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [125.049135] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [125.049266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [125.049396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [125.049525] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [125.049656] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [125.049787] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0

<7> [125.049957] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [125.050087] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [125.050234] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [125.050362] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [125.050491] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [125.050621] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [125.050751] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [125.050886] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [125.051031] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [125.051166] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [125.051315] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [125.051460] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [125.051596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset]

<7> [125.051729] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [125.051870] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [125.052004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [125.052138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [125.052270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [125.052400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [125.062199] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [125.082987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [125.083606] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [125.084336] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [125.084989] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [125.085569] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [125.086165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [125.086763] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [125.087358] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [125.087916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [125.088469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [125.089059] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [125.089863] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.090456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [125.091033] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [125.092241] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B]

<7> [125.092632] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C]

<7> [125.198119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [125.198755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.199405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.201250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.201944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.205400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.206712] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.206945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.207222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.207356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.207525] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [125.296140] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf

<7> [125.297284] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]

<7> [125.309007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.309377] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.310012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.310628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.311318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [125.311999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [125.312651] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [125.313332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [125.313973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.314619] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [125.315214] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.315946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.318012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.318572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.328911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.329090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.329384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [125.330223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.331724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [125.331945] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B]

<7> [125.336083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [125.340002] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C]

<7> [125.353868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [125.354115] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.354263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.367797] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [125.367805] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [125.367815] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [125.367817] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [125.368993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [125.369127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [125.370208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [125.370335] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [125.370358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [125.375129] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [125.379996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.380173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.380311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [125.381127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.401021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [125.401225] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.401400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.402729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.403033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.407625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.409046] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.409474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.409979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.410313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.410688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [125.579054] Freezing user space processes completed (elapsed 0.002 seconds)

<6> [125.580616] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

<7> [135.661776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [135.905673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.905887] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [135.906031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [135.906204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [135.906429] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.906644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.906842] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.907038] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [135.907221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [135.907616] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [135.907761] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [135.908179] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [135.908920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.909056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.917637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.917789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.922995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [135.968884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [135.968895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [135.968898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [135.968903] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [135.970106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [135.970251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [135.971353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [135.971486] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [135.971509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [135.976233] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [135.981351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [135.985973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [136.031404] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [136.031413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [136.031416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [136.031418] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [136.032639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [136.032773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [136.033835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [136.033968] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [136.033990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [136.038742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [136.043620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.027086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.027429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.028346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.029753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [138.030677] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [138.034733] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [138.034744] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [138.042601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [138.042768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.042911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.043044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.044318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.045739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.045890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.046675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.048051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [138.048254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [138.048489] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0

<7> [138.050171] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<3> [138.073897] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [138.425094] PM: start suspend of devices complete after 529.039 msecs

<7> [138.440846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [138.441137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [138.441283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.441429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.441591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.442889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.444123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.445535] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [138.446220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [138.446571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [138.446793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [138.447238] PM: late suspend of devices complete after 22.141 msecs

<7> [138.656968] PM: noirq suspend of devices complete after 208.401 msecs

<6> [138.657061] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable

<6> [138.657095] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable

<6> [138.657102] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable

<6> [138.660374] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off

<6> [138.793547] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry

<6> [141.094281] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit

<6> [141.097156] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on

<7> [141.466617] PM: noirq resume of devices complete after 369.460 msecs

<7> [141.474449] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08

<7> [141.475090] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [141.475848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [141.476623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [141.477509] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.478294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.479178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.480072] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [141.481036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [141.482002] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [141.482871] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [141.484415] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [141.486502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.487086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.487722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [141.488368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [141.488704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [141.489180] PM: early resume of devices complete after 15.875 msecs

<7> [141.496717] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [141.496881] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [141.497337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: disabled

<7> [141.497585] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled

<7> [141.497818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled

<7> [141.497964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [141.498112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [141.498269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [141.498413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [141.498555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [141.498699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [141.498841] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B

<7> [141.498981] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B

<7> [141.499125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B

<7> [141.499267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B

<7> [141.499408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B

<7> [141.499550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B

<7> [141.499695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C

<7> [141.499838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C

<7> [141.499994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C

<7> [141.500145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C

<7> [141.500285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C

<7> [141.500426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C

<7> [141.500572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:387:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [141.500712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:397:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [141.500852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:401:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [141.500980] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A

<7> [141.501107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B

<7> [141.501275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C

<7> [141.501421] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [141.501570] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [141.501717] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [141.502038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:388:HDMI-A-1] hw state readout: disabled

<7> [141.502206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:398:HDMI-A-2] hw state readout: disabled

<7> [141.502357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:402:DP-1] hw state readout: disabled

<7> [141.502508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:410:HDMI-A-3] hw state readout: disabled

<7> [141.502637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [141.502765] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [141.502912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [141.503088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [141.503284] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [141.503448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [141.503577] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [141.503707] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz

<7> [141.503835] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz

<7> [141.503988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz

<7> [141.504186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz

<7> [141.504367] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz

<7> [141.504550] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz

<7> [141.504695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz

<7> [141.504870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz

<7> [141.505003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz

<7> [141.505140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz

<7> [141.505277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz

<7> [141.505468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz

<7> [141.505646] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz

<7> [141.505821] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz

<7> [141.505997] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [141.506184] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [141.506350] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [141.506514] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [141.506696] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [141.506880] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [141.507128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [141.507295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state]

<7> [141.507430] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state]

<7> [141.507764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [141.507954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [141.508144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.508338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [141.508529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.508699] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [141.508877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state

<7> [141.509054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [141.509283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.509472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [141.509664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.509849] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [141.510034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:385:pipe C] fastset requirement not met in dpll_hw_state

<7> [141.510229] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [141.510416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.510573] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [141.510749] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [141.510932] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset

<7> [141.511185] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [141.511355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset]

<7> [141.511527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [141.511713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [141.511903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [141.512081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [141.512271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [141.512449] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [141.512614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [modeset]

<7> [141.512748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:151:plane 1B] fb: [NOFB], visible: no

<7> [141.512886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [141.513072] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [141.513219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [141.513353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [141.513490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [141.513647] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [modeset]

<7> [141.513777] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:269:plane 1C] fb: [NOFB], visible: no

<7> [141.513905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:299:plane 2C] fb: [NOFB], visible: no

<7> [141.514033] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:329:plane 3C] fb: [NOFB], visible: no

<7> [141.514173] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:359:plane 4C] fb: [NOFB], visible: no

<7> [141.514302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:369:plane 5C] fb: [NOFB], visible: no

<7> [141.514433] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:379:cursor C] fb: [NOFB], visible: no

<7> [141.514855] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [141.514991] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [141.515127] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [141.515265] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [141.515395] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [141.515535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [141.515670] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [141.515837] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [141.515997] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:402:DP-1]

<7> [141.516208] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [141.516428] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [141.516688] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B]

<7> [141.516923] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C]

<7> [141.517962] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<7> [141.518104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [141.523327] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0

<7> [141.523368] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [141.527930] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [141.532192] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [141.532209] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<3> [141.547416] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [141.549236] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [141.549246] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [141.549249] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [141.549251] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [141.549458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [141.549586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [141.549885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [141.550010] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [141.550033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [141.554229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [141.602277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [141.602499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [141.602713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.602912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.603100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.604497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [141.738337] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<3> [142.115139] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [142.117480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.117798] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [142.118056] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<6> [142.119480] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])

<7> [142.123228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.124578] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.124883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.125184] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.125327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.125502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.236296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.236668] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.237300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.238033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.238775] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.239535] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.240211] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.240965] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.241646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.243789] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [142.244451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.245643] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.247661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.248255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.257315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.257484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.257727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [142.262333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [142.292901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.292911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.292914] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [142.292916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [142.293125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.293249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [142.293551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.293678] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.293700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [142.298973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [142.402473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.403092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.409065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.410514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.411181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.411865] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.412411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.412969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.477309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.477675] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.478320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.478930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.479624] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.480297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.480938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.481611] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.482238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.482878] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [142.483464] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.484171] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.486184] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.486735] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.495816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.496092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.496528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [142.501220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [142.531983] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.531992] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.531994] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [142.531997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [142.532199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.532325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [142.532632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.532760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.532781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [142.538002] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [142.610385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.611060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.617064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.618533] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.619268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.620032] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.620659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.621314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.710316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.710688] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.711331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.711944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.712639] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.713319] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.713962] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.714640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.715269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.715912] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [142.716512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.717242] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.719246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.719800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.728911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.729161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.729550] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [142.734381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [142.766302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.766311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.766314] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [142.766316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [142.766517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.766637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [142.766936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.767059] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.767080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [142.772308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [142.842334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.842953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.850070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.851584] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [142.852286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [142.853019] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [142.853651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [142.854336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.942293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.942669] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [142.943308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [142.943922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [142.944612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.945286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.945926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.946598] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [142.947220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [142.947869] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [142.948465] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [142.949346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [142.950019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.950164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.957559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.957742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.958009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [142.962650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [142.994974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [142.994982] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [142.994985] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [142.994988] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [142.995830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.995952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [142.996267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [142.996397] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.996418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [143.000730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [143.098397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.099015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.106158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.107671] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.108360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.109153] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.109778] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.110445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.171281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.171653] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.172300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.172967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.173710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.174419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.175063] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.175774] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.176457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.177121] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [143.177259] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.177551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.178235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.178367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.184499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.184598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.184736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [143.189469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [143.221383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [143.221392] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [143.221395] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [143.221398] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [143.221604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.221726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [143.222035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.222558] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.222604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [143.227487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [143.298476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.299160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.306323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.307776] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.308484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.309209] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.309791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.310422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.398289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.398661] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.399316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.399974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.400718] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.401441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.402086] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.402801] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.403455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.404177] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [143.404768] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.405552] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.407588] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.408185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.418484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.418673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.418945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [143.423622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [143.454321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [143.454330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [143.454333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [143.454335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [143.454543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.454666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [143.454972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.455112] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.455344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [143.460295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [143.562451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.563857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.569738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.571205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.571911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.572685] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.573275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.573882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.632846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.633280] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.633866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.634520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.635199] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.635854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.636533] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.637186] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.637803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.638512] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [143.638644] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.638884] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.639563] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.639696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.645829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.645927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.646065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [143.650803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [143.680540] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [143.680549] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [143.680552] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [143.680555] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [143.680756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.680881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [143.681192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.681321] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.681343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [143.686392] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [143.754500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.755071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.761039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.762465] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [143.763146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [143.763863] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [143.764459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [143.765049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.860308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.860684] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [143.861326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [143.861938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [143.862644] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.863327] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.863969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.864658] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [143.865290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [143.865939] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [143.866411] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [143.866648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [143.867329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.867468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.874872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.875057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.875345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [143.880019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [143.911399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [143.911409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [143.911413] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [143.911415] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [143.911624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.911752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [143.912058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [143.912216] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.912238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [143.916785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [144.018555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.019273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.023947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.025291] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.025526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.025804] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.025941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.026122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.092278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.092645] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.093272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.093895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.094591] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.095267] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.095914] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.096589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.097233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.097880] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.098500] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.099217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.100017] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.100158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.108778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.108959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.109234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [144.113834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [144.144759] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.144767] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.144770] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [144.144773] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [144.144977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.145111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [144.145423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.145551] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [144.145572] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [144.150501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [144.218323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.218889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.224850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.226327] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.227028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.227829] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.228416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.229020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.322261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.322633] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.323264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.323879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.324575] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.325252] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.325890] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.326564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.327203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.327862] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.328453] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.329185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.331199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.331760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.340847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.341108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.341521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [144.347532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [144.379374] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.379383] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.379386] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [144.379388] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [144.379593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.379717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [144.380024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.380480] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [144.380523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [144.385436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [144.450376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.450847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.456847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.458371] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.459061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.459898] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.460520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.461168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.554267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.554639] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.555277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.555891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.556583] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.557264] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.557908] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.558571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.559197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.559843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.560427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.561152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.563155] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.563710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.573960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.574282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.574566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [144.579162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [144.609757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.609766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.609769] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [144.609772] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [144.609973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.610109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [144.610422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.610549] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [144.610571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [144.615823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [144.714379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.715055] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.721019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.722405] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.722635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.722914] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.723050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.723239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [144.789253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [144.789618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [144.790259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [144.790878] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [144.791571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.792256] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.792898] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.793565] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [144.794194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [144.794837] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [144.795430] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [144.795929] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [144.796600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [144.796732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [144.804128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [144.804322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [144.804595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [144.809187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [144.841613] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [144.841622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [144.841625] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [144.841627] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [144.841830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.841951] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [144.842354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [144.842481] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [144.842502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [144.847267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [144.914353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [144.915025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [144.922243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [144.923755] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [144.924444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [144.925222] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [144.925837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [144.926501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.018271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.018640] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.019280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.019892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.020594] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.021272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.021919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.022608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.023243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.023889] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.024484] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.025209] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.027213] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.027764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.036865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.037115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.037500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [145.042348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [145.073083] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.074138] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.074141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [145.074143] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [145.074353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.074473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [145.074788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.074915] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [145.074935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [145.079135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [145.146274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.146948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.154116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.155645] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.156388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.157177] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.157799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.158460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.251262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.251632] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.252274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.252888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.253583] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.254261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.254901] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.255576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.256203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.256843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.257451] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.258185] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.260190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.260742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.269841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.270141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.270600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [145.275359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [145.306052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.306069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.306072] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [145.306074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [145.306284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.306407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [145.306715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.306841] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [145.306862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [145.312075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [145.378310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.378978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.384953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.386346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.386600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.386879] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.387015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.387206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.483249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.483617] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.484248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.484868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.485562] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.486237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.486888] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.487564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.488203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.488855] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.489441] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.490161] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.491047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.491194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.498571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.498716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.498921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [145.503521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [145.532904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.532913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.532916] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [145.532919] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [145.533125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.533250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [145.533571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.533697] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [145.533719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [145.538947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [145.611181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.611855] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.617799] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.619147] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.619405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.619743] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.619942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.620198] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.712245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.712613] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.713254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.713869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.714567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.715318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.716015] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.716722] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.717376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.718020] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.718618] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.719344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.721353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.721908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.731022] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.731303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.731646] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [145.736343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [145.766995] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [145.767004] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [145.767007] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [145.767009] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [145.767208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.767331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [145.767635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [145.767763] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [145.767784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [145.773039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [145.842345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [145.843027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [145.850244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [145.852037] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [145.853179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [145.854250] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [145.855083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [145.855970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [145.945246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [145.945618] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [145.946286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [145.946899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [145.947600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.948280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.948920] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.949593] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [145.950265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [145.950906] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [145.951500] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [145.952218] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [145.954227] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [145.954786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [145.963884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [145.964131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [145.964526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [145.969370] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [146.001216] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.001225] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.001228] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [146.001230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [146.001429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.001552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [146.001855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.001979] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [146.002000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [146.007277] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [146.074240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.074815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.082000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.083885] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.084970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.086178] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.087100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.088021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.177230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.177602] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.178234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.178852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.179681] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.180455] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.181139] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.181921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.182639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.183460] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.184106] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.184848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.187083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.187679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.199234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.199398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.199633] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [146.204225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [146.234981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.234990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.234993] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [146.234995] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [146.236131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.236256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [146.236567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.236693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [146.236714] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [146.241023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [146.338210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.338886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.344926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.346273] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.346601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.346924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.347073] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.347309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.417196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.417567] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.418194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.418803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.419500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.420178] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.420818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.421491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.422119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.422772] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.423359] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.424069] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.426068] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.426620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.435697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.435972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.436401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [146.441101] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [146.470886] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.470895] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.470897] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [146.470900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [146.471776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.471901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [146.472203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.472332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [146.472353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [146.476687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [146.546251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.546925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.554125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.555931] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.557064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.558125] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.558944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.559948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [146.649225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.649600] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.650253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.650936] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.651676] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.652387] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.653026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.653737] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.654395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.655067] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.655309] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.655551] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.656235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.656372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.662509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.662611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.662747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [146.667480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [146.699384] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.699393] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.699396] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [146.699399] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [146.699601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.699723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [146.700031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.700526] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [146.700564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [146.705367] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [146.770276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [146.770773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [146.777963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.779845] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [146.780959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [146.782109] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [146.782950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [146.783936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [146.865075] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS

<7> [146.869110] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:398:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [146.869737] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [146.870322] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [146.870922] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:397:DDI TC1/PHY C] [CRTC:149:pipe A]

<7> [146.871521] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [146.872137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [146.872712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [146.873329] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [146.873920] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [146.874541] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [146.875146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [146.875692] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [146.876347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [146.876907] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [146.877536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [146.878141] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [146.878689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [146.879282] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [146.879865] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [146.880423] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [146.880870] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [146.881336] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [146.881779] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [146.882244] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [146.882695] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [146.883165] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [146.883500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [146.883826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [146.884176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [146.884512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [146.884829] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [146.885420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [146.885737] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [146.886089] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [146.886370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [146.886592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [146.886815] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [146.887057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [146.887294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [146.887513] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [146.887735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [146.887956] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [146.888261] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [146.888485] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [146.888709] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [146.888930] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [146.889175] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [146.889372] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [146.889520] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [146.889668] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [146.889832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 559716 num active planes 1

<7> [146.889986] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [146.890152] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [146.890330] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [146.890495] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [146.890647] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0

<7> [146.890803] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0

<7> [146.890963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [146.891134] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [146.891296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [146.891446] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [146.891589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [146.891721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [146.891852] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [146.891984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [146.892126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [146.892265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [146.892396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [146.892525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [146.892654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [146.892783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [146.892912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [146.893050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [146.893190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [146.893320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [146.893448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [146.893575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [146.893703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [146.893832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [146.893959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [146.894101] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [146.894241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [146.894370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [146.894498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.894624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.894752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.894883] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [146.895016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [146.895192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.895325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.895453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [146.895583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [146.895714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [146.895845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:414] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [146.895977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [146.896121] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [146.896261] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [146.896390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [146.896520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [146.896649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [146.896779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [146.908322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [146.908408] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [146.908562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [146.908738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [146.908969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.909216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.909417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.909621] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [146.909802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [146.910239] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [146.910378] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [146.910826] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [146.911531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [146.911665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [146.919015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [146.919310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [146.919516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [146.920254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [146.921647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [146.921802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [146.921937] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [146.922084] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [146.922224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [146.922355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [146.922485] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [146.922653] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [146.922877] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [146.923013] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [146.923225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [146.923397] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [146.924201] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [146.924338] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [146.943458] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [146.943907] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [146.946094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [146.946670] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [146.963463] Console: switching to colour frame buffer device 240x67

<7> [146.963481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<6> [146.974303] e1000e 0000:02:00.0 enp2s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

<7> [146.989707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [146.989717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [146.989720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor fitHeadless4k

<7> [146.989729] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 0

<7> [146.989935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.990097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [146.990424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [146.990552] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [146.990577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [147.000375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

Results for igt@i915_pm_rpm@system-suspend-execbuf