Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.19 seconds
Igt-Version 
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-CI_DRM_17728-gf2a0e58c7784+ x86_64)
Out 
Using IGT_SRANDOM=1766401234 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.191s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.191s)
Dmesg
<6> [300.674843] Console: switching to colour dummy device 80x25
<6> [300.677659] [IGT] kms_force_connector_basic: executing
<7> [300.690809] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [300.697661] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [300.699756] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [300.703640] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [300.703673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.703694] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.704767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.705664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.707522] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.709360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.710194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.711500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.712407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.712433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.713172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.715967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.715996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.717044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.718749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.719867] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [300.720195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.720219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.721311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.722145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.724073] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.725802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.726750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.727983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.728954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.728982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.729948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.732697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.732724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.733750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.735348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.736203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [300.737618] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [300.737649] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [300.737670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [300.738752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.739742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.741585] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.743378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [300.744235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [300.745471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [300.746433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [300.746462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.747442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [300.750114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [300.750143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [300.751235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.752945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.754002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [300.754448] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [300.754475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [300.755610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.756637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.759622] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.763050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [300.763878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [300.765032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [300.766025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [300.766052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.767000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [300.771829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [300.771863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [300.772917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.776112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.777081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [300.777412] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.777432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.778473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.779355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.781659] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.784417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.785172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.786374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.787191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.787219] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.788270] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.793407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.793452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.797066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.798484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.801398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [300.802165] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [300.804446] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [300.804508] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.804530] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.805809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.806696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.809938] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.812124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.813106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.816013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.816975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.817026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.818558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.822901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.822958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.823898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.825903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.827839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from disconnected to connected
<7> [300.828061] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [300.828393] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [300.830705] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [300.830736] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.830754] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.830770] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [300.830786] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [300.830801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.831073] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.831093] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.832023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.832956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.843103] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.851483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.852369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.856331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.857154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.857209] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.859370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.866108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.866160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.869167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.872372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.876056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [300.876087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.876105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.876120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [300.876135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [300.876150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.880753] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [300.880877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.880900] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.886406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.887464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.891387] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.893322] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [300.893351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [300.893646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [300.894668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.896404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [300.897344] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [300.898093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.899683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.901159] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [300.901205] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [300.901338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [300.901357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [300.901374] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [300.901389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [300.901404] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.901419] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.901434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.904646] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:119:HDMI-A-1] EDID override set
<7> [300.904787] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.904808] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.906522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.907386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.909204] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.911089] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD monitor IGT
<7> [300.911115] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:119:HDMI-A-1] ELD size 24, SAD count 0
<7> [300.911130] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 5
<7> [300.911988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [300.912863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.914512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [300.916183] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [300.917338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.919310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.921575] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [300.921627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [300.921647] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [300.921665] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [300.921682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.921699] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.921715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.923322] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [300.923468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.923489] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.925044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.925944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.929062] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.931516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.932459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.933959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.935061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.935113] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.936633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.939750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.939796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.941301] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:119:HDMI-A-1] EDID changed, epoch counter 6
<7> [300.941367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.944745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.946178] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [300.946231] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [300.946326] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] probed modes:
<7> [300.946345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [300.946362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [300.946379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [300.946394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [300.946410] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [300.948208] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [300.948295] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.948377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.949218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.950101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.952746] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.956599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.957525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.959073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.960056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.960084] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.962643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.966171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.966203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.969051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.971345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.972186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] status updated from connected to disconnected
<7> [300.972349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [300.972402] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [300.972652] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [300.975195] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [300.975234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [300.976425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [300.977344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [300.979371] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [300.980828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.981738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [300.983205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [300.984310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.984338] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [300.985459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [300.989604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [300.989639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [300.991346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [300.993392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [300.994426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<6> [300.995586] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [300.997862] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [301.002844] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:112:DP-1] EDID override reset
<7> [301.002958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [301.002981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [301.004054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.004939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.007528] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.013020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [301.013188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [301.018595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.020006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.020879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.022012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.022937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.022965] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.023836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.027207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.027655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.028988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [301.034065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.036284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.037150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.038715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.039902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.039933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.041218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.044143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.044175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.046475] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:119:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [301.046512] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [301.046537] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.047648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.050368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.051387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.052161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.053927] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.055629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.056616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.058622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.060578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.060611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.061520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.064316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.064344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.065224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.066865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.067804] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [301.069075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [301.069105] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.070074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.070988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.072524] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.074233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.075145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.076309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.077134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.077162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.078007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.080619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.080648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.081661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.083300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.084145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [301.085118] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:HDMI-A-1] EDID override reset
<7> [301.085232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [301.085304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.086233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.087278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.089108] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.090871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.091811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.092990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.093912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.093940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.094783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.097360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.097389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.098428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.100056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.101099] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [301.102019] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:124:DP-2] EDID override reset
<7> [301.102135] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [301.102159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [301.103367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.104134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.105622] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.111062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [301.111281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [301.116630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.118020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.118959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.120085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.121015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.121043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.121915] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.124552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.124582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.125536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [301.130622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.133534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.134377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.135416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.136232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.136359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.137129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.141372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.141405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.142385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.143916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.145914] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:128:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [301.145945] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [301.145965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.147213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.148288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.149949] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.151626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.152548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.154735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.156396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.156424] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.157171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.163599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.163633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.164571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.166358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.167332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [301.167682] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [301.167718] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.170352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.171184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.173546] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.176776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.177681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.178882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.179915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.179942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.180837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.185447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.185481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.186539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.188127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.190968] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [301.192918] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:128:HDMI-A-2] EDID override reset
<7> [301.193028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [301.193049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.194104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.195045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.196665] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.199626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.200465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.202662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.204184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.204211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.205129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.209190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.209223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.211296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.212915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.213948] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<6> [301.219424] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [301.223478] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [301.231781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.233595] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [301.233619] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [301.233826] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1]
<7> [301.233851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [301.235111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.239880] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.245491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:112:DP-1] disconnected
<7> [301.245537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1]
<7> [301.245559] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.247680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.248581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.250742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.252619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.252650] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.253860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.260454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.260491] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.264192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.266876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.269618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:119:HDMI-A-1] disconnected
<7> [301.269774] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2]
<7> [301.269797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [301.270839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [301.271693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling display
<7> [301.274568] i915 0000:00:02.0: [drm:intel_vga_disable [i915]] Disabling VGA plane on pipe A
<7> [301.280010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:124:DP-2] disconnected
<7> [301.280056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2]
<7> [301.280076] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.282627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.283526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.284806] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.286690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.286720] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.287937] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.294037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.294163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.296540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:128:HDMI-A-2] disconnected
<7> [301.296583] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [301.296598] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:112:DP-1] enabled? no
<7> [301.296612] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:119:HDMI-A-1] enabled? no
<7> [301.296626] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:124:DP-2] enabled? no
<7> [301.296638] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:128:HDMI-A-2] enabled? no
<7> [301.296736] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [301.296772] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [301.296971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:112:DP-1]
<7> [301.302056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:119:HDMI-A-1]
<7> [301.303323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.304072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [301.305298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [301.306115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.306146] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.307966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [301.314846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [301.314880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [301.318162] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [301.318861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:124:DP-2]
<7> [301.324484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:128:HDMI-A-2]
<7> [301.325713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.326543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK on first message, retry
<7> [301.327652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<7> [301.328539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.328567] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [301.330337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus panel. force bit now 1
<7> [301.334169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
<7> [301.334197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus panel. force bit now 0
<7> [301.337415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling display
<7> [301.338962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [301.347575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<6> [301.350843] Console: switching to colour frame buffer device 128x48
<7> [301.370752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2025-12-23 14:22:14