Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.02 seconds
Igt-Version 
IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-CI_DRM_17725-g50dc58765da3+ x86_64)
Out 
Using IGT_SRANDOM=1766341292 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.022s)
Dmesg
<6> [261.431145] Console: switching to colour dummy device 80x25
<6> [261.432248] [IGT] kms_force_connector_basic: executing
<7> [261.654128] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.655655] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [261.656407] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.657664] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [261.657681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.657695] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.658121] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.658552] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.659147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.659582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.660138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.660569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.660580] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.660973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.662851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.662863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.663242] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.663693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.663785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.663797] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.664196] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.664617] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.665182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.665600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.666162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.666449] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.666456] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.666762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.668062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.668071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.668327] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.668635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.668793] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.668801] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.669067] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.669321] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.669771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.670033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.670436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.670736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.670746] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.671041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.672334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.672342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.672618] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.672916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [261.673818] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [261.674324] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 2 or reprobing
<7> [261.674336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.674345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from disconnected to connected
<7> [261.674371] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [261.674463] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [261.674671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.675080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.675562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.675887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.675905] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.676161] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.677530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.677545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.677889] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [261.677897] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.677903] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.677909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.677915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.677920] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.677988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.678193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.678592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.678998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.679252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.679267] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.679546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.680953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.680969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.681324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [261.681332] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.681338] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.681344] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.681349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.681354] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.681780] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [261.681832] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.681896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [261.681902] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [261.682079] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [261.682091] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [261.682101] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [261.682106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [261.682112] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [261.682117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [261.682123] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.682128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.682133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.682336] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [261.682373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.682416] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [261.682421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [261.682425] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 58
<7> [261.682658] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [261.682678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [261.682686] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [261.682697] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [261.682706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.682715] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.682724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.682998] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [261.683037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.683235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.683578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.684001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.684259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.684275] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.684578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.686044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.686062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.686421] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [261.686436] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [261.686447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [261.686454] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [261.686460] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [261.686466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [261.686471] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [261.686476] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [261.686968] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 2 to 0 or reprobing
<7> [261.686978] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.686986] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.687265] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.687574] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.688058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.688310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.688748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.689004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.689011] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.689265] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.690623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.690631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.690889] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.691145] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from connected to disconnected
<7> [261.691159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.691172] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [261.691262] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [261.691276] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 60
<7> [261.691375] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.691383] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.691722] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.692065] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.692488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.692787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.693264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.693543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.693553] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.693891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.695186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.695195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.695454] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.695773] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [261.696705] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [261.697327] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [261.698163] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:LVDS-1] force updated from 0 to 0 or reprobing
<7> [261.698176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [261.698191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [261.698197] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [261.698283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [261.698289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [261.698331] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [261.698339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [261.698343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [261.698409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [261.698415] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [261.698676] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:LVDS-1] EDID override reset
<7> [261.698726] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [261.698738] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [261.698746] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [261.698835] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [261.698841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [261.699100] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [261.699107] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.699114] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.699412] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.699729] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.700238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.700493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.700962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.701227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.701235] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.701489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.703114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.703126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.703407] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.703729] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.703828] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.703837] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.704109] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.704365] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.704805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.705063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.705466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.705771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.705781] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.706104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.707413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.707420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.707705] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.707981] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.708197] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [261.708230] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [261.708237] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [261.708502] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [261.708803] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [261.709261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.709534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [261.709965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [261.710214] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.710221] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.710473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [261.711794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [261.711802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [261.712056] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [261.712310] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [261.712718] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:78:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [261.712731] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [261.712743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [261.764535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [261.780578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.780590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.780875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.796579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.796589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.796848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [261.796930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [261.796938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [261.848610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [261.864585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.864597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.864869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.880584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.880595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.880886] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [261.881134] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:78:HDMI-A-1] EDID override reset
<7> [261.881171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [261.881179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [261.933158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [261.949638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.949668] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.950686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [261.967638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [261.967653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [261.967987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [261.968281] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:86:DP-1] EDID override reset
<7> [261.968336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [261.968345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [261.972777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [261.973250] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [261.973264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [261.973275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [261.974007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.974269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.974741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.974998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.975005] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.975254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.976581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.976588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.976851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [261.976917] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [261.976924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [261.977393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.977821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.978373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.978783] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.978792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.979174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.980899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.980910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.981287] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [261.981625] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-2] EDID override reset
<7> [261.981678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [261.981690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [261.982310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.982615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [261.983045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [261.983298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.983305] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.983596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [261.984923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [261.984931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [261.985191] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [261.985502] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:95:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [261.985552] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [261.985562] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [261.986038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.986289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.986749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.987030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.987038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.987402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.988865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.988873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.989134] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [261.989197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [261.989204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [261.989641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.989945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.990358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.990643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.990649] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.990947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.992247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.992254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.992534] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [261.992745] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-3] EDID override reset
<7> [261.992776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [261.992783] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [261.993216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.993465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [261.993916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [261.994191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.994198] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [261.994444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [261.995743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [261.995750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [261.996006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [261.996211] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-2] EDID override reset
<7> [261.996241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [261.996248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [262.000567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [262.000768] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:103:DP-3] EDID override reset
<7> [262.000798] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [262.000805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [262.005105] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<6> [262.007550] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [262.008209] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [262.013618] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [262.013638] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [262.013760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [262.013776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [262.013783] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [262.013870] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [262.013876] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [262.013883] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [262.013889] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [262.014241] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [262.014498] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [262.015053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [262.015372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [262.015852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [262.016110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [262.016117] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [262.016371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [262.017723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [262.017730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [262.017985] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [262.018240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [262.018253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [262.018260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [262.070126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [262.086575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [262.086585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [262.086836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [262.102584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [262.102596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [262.103689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [262.103706] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [262.103718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [262.108152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [262.108178] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [262.108186] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [262.108629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [262.108886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [262.109313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [262.109733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [262.109744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [262.110134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [262.112044] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [262.112064] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [262.112678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [262.112695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [262.112707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [262.113302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [262.113730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [262.114301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [262.114733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [262.114744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [262.115128] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [262.116931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [262.116941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [262.117321] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [262.117335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [262.117346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [262.121851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [262.121868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [262.121878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [262.126297] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<7> [262.126318] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] enabled? yes
<7> [262.126329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:75:VGA-1] enabled? no
<7> [262.126338] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:78:HDMI-A-1] enabled? no
<7> [262.126345] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:86:DP-1] enabled? no
<7> [262.126353] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-2] enabled? no
<7> [262.126360] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:HDMI-A-3] enabled? no
<7> [262.126367] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-2] enabled? no
<7> [262.126375] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:103:DP-3] enabled? no
<7> [262.126410] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [262.126444] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] found preferred mode: 1366x768
<7> [262.126453] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [262.126492] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:51:pipe A] desired mode 1366x768 set (0,0)
<7> [262.129944] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [262.147349] Console: switching to colour frame buffer device 170x48
Created at 2025-12-23 09:58:18