igt@i915_pm_rpm@module-reload on fi-skl-6600u@CI_DRM

Detail	Value
Duration	12.67 seconds
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-CI_DRM_17724-g7af813455943+ x86_64)
Out	Using IGT_SRANDOM=1766284045 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888119d8d818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888108339818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_audio_component_get_power+0x2f/0x180 [i915] snd_hdac_display_power+0x8a/0x1c0 [snd_hda_core] azx_probe_continue+0x24f/0x9f0 [snd_hda_intel] azx_probe_work+0x15/0x20 [snd_hda_intel] process_one_work+0x22e/0x6b0 worker_thread+0x1e8/0x3d0 kthread+0x11f/0x250 ret_from_fork+0x344/0x3a0 ret_from_fork_asm+0x1a/0x30 ref_tracker: intel_runtime_pm@ffff888108339818 has 1/2 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get+0x1a/0x30 [i915] intel_display_rpm_get+0x1f/0x30 [i915] intel_display_power_get+0x22/0x70 [i915] intel_pps_vdd_on_unlocked+0xbd/0x360 [i915] intel_dp_aux_xfer+0x12b/0x960 [i915] intel_dp_aux_transfer+0xd4/0x330 [i915] drm_dp_dpcd_access+0xc3/0x160 [drm_display_helper] drm_dp_dpcd_read+0x87/0x160 [drm_display_helper] intel_alpm_init+0x39/0x90 [i915] intel_dp_init_connector+0x9c4/0x14e0 [i915] intel_ddi_init+0xd03/0x1220 [i915] intel_bios_for_each_encoder+0x39/0x60 [i915] intel_setup_outputs+0x1f4/0xc20 [i915] intel_display_driver_probe_nogem+0x110/0x1e0 [i915] Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff888113bfd818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] hsw_get_pipe_config+0x1b9/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 __x64_sys_ioctl+0xa5/0x100 Subtest module-reload: SUCCESS (12.671s)
Err	Starting subtest: module-reload Subtest module-reload: SUCCESS (12.671s)
Dmesg	<6> [276.710126] Console: switching to colour dummy device 80x25 <6> [276.711372] [IGT] i915_pm_rpm: executing <7> [276.714631] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [276.715442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [276.715457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [276.716159] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.716460] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.716806] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.717211] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.717223] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [276.717231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [276.717268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [276.717680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.718030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.719966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [276.719976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.719984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.720082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.720089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.724447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.724538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.724546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.725282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.725576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.726118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.726539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.726549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.726901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.730081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.730091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.730364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.730498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.730510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.734880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.734963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.734971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.735947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.736207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.736622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.736917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.736925] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.737138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.740207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.740219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.740546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.747861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.747872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.752218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.753125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.753137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.753836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.754169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.754578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.754872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.754881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.755229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.758427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.758436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.758824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.759772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.759783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.764248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.765146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.765158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.765817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.766189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.766644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.766912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.766919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.767166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.770318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.770326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.770626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.771379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [276.771403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [276.771822] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [276.772159] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [276.772512] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [276.772879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [276.772887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [276.772892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [276.772917] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [276.773143] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [276.773367] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [276.774340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [276.774348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [276.774356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [276.774384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [276.774410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [276.778817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [276.778850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [276.778858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [276.779348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.779579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [276.780102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [276.780530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.780539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.780880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [276.784013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [276.784022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [276.784258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [276.784289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [276.784297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [276.788642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [276.788674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [276.788681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [276.789170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.789376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [276.789794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [276.790100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.790112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [276.790316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [276.793366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [276.793381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [276.793662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [276.794250] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143] <7> [277.080117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [277.837893] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [277.838387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [277.839479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [277.840225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [277.840500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [277.840761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [277.841004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [277.841245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [277.841522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.841782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [277.842023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.842262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.842523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.842789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.843031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.843272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.843532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.843793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.844035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [277.844277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.844543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [277.844803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [277.845044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [277.845284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [277.845582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [277.845843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [277.846158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [277.846437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [277.846719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [277.847012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [277.847272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [277.847555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [277.847828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [277.848129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [277.848380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [277.848676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [277.848941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [277.849182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [277.849448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [277.849714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [277.849962] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [277.850204] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [277.850525] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [277.850796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [277.851030] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [277.851261] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [277.851527] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.851782] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.852027] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [277.852344] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [277.852648] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [277.852926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [277.853162] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [277.853399] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [277.853774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [277.854162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [277.854553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [277.854924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [277.855547] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [277.857254] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [278.063862] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [278.065750] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [278.086808] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [278.087334] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [278.087893] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [278.088713] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [278.089365] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [278.140375] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.141067] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.141533] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [278.142843] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.143014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [278.146715] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.147052] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [278.148092] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.148960] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [278.150356] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [278.153019] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [278.154165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [278.155065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [278.156122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [278.157052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [278.158090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [278.158990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [278.160051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [278.161097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [278.162195] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [278.164257] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [278.167787] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [278.169131] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [278.272112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [278.273918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [278.275025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [278.276527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [278.278726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [278.295546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [278.382331] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [278.383577] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [278.385074] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [278.386251] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [278.387479] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [278.388268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [278.389166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [278.390809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [278.391915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [278.393352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [278.394675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [278.396155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [278.397714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [278.399124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [278.400492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [278.401848] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [278.402943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [278.404286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [278.405510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [278.407075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [278.408449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [278.409791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [278.411194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [278.412720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [278.413788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [278.415221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [278.416712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [278.418062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [278.419401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [278.420730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [278.422066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [278.423176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [278.424058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [278.425109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [278.426009] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [278.427112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [278.428034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [278.429105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [278.429974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [278.431074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [278.432023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [278.433320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [278.434286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [278.435391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [278.436308] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [278.437648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [278.438688] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [278.439558] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [278.440645] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [278.441513] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [278.442812] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [278.443826] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [278.445082] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [278.446101] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [278.447149] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [278.448051] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [278.449109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [278.449967] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [278.451144] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [278.452283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [278.453378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [278.454337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [278.455392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [278.456256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [278.457319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [278.458229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [278.459309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [278.460499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [278.461346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [278.462495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [278.463309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [278.464215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [278.465333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [278.466225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [278.467272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [278.468257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [278.469383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [278.470311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [278.471662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [278.473009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [278.474334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [278.475674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [278.477021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [278.477984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [278.479266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [278.480627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [278.481977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [278.483257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [278.484149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [278.484921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [278.485684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [278.486576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [278.487458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [278.488305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [278.489201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [278.490089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [278.490929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [278.491732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.492278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.492746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [278.493253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [278.493707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [278.494212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [278.494666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [278.495167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [278.495653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [278.496279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [278.508542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [278.516741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [278.517021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [278.517673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [278.518356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.519134] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [278.519923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [278.520226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [278.520495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [278.520768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [278.520999] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [278.521230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [278.521480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [278.521734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [278.521964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [278.522375] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [278.522653] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [278.523121] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [278.523572] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining) <7> [278.647858] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [278.657672] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.658127] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [278.658649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [278.708145] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [278.709253] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [278.710266] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [278.711252] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [278.866507] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [278.867779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [278.869076] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.872098] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [278.873744] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [278.880280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [278.881543] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [278.885056] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [278.886693] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [278.888144] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [278.892017] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [278.893507] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [278.894982] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [278.900249] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [278.901370] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [278.902409] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [278.906581] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [278.908028] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [278.910252] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [278.912856] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [278.913788] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [278.915326] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [278.928787] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [278.933798] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [278.935020] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [278.939077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [278.939832] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [278.945509] [IGT] i915_pm_rpm: starting subtest module-reload <7> [278.945004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [278.947101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.948383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [278.950140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [278.952123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.952163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.954032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [278.960175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [278.960217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [278.961657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [278.968842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [278.971183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.972473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [278.974609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [278.975944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.975980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [278.978029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [278.984056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [278.984095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [279.100088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.100859] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.113581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.139171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.139598] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.152605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.186473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.187633] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [279.202585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.203100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.204484] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [279.204809] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.205090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.205367] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [279.205808] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.206109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.206386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [279.207214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [279.289073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [279.289850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [279.290162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [279.290497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [279.292573] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [279.292702] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [279.293188] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [279.293760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.294246] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.294744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [279.295513] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [279.312351] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [279.313748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [279.314108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [279.314506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [279.315069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [279.315658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [279.316221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [279.316812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [279.317369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [279.317955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [279.318529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [279.319085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [279.319662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [279.320219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [279.320838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [279.321395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [279.322041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [279.322745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [279.323313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [279.323908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [279.324485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [279.325046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [279.325629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [279.326191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [279.326778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [279.327339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [279.327946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [279.328527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [279.329068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [279.329679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [279.330235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [279.330811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [279.331365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [279.331939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [279.332517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [279.333077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [279.333661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [279.334221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [279.334798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [279.335354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [279.335938] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [279.336518] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [279.337187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [279.337837] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [279.338535] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [279.339092] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [279.339742] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [279.340294] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [279.340887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [279.341464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [279.342018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [279.342594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [279.344661] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [279.551892] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [279.553977] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [279.566243] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [279.567213] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [279.568211] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [279.569400] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [279.570959] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [279.622157] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [279.623133] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [279.624018] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [279.625026] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [279.627205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [279.627917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [279.629210] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [279.629996] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [279.631769] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [279.635501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [279.637257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [279.638744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [279.640302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [279.641853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [279.643396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [279.644980] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [279.646503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [279.648050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [279.649630] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [279.652822] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [279.716501] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [279.756850] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [279.786714] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [279.790204] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [279.802401] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [279.807673] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [279.831509] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (296 ms remaining) <7> [280.136091] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [280.166776] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [280.814697] [IGT] Reloading i915 w/o display <5> [281.670978] Setting dangerous option force_probe - tainting kernel <6> [281.683083] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [281.684882] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [281.685286] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [281.685587] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [281.685874] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [281.686182] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [281.686606] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [281.686833] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [281.687850] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [281.688074] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [281.688297] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [281.688530] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [281.688543] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [281.689256] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [281.689311] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [281.689731] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [281.690102] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [281.690430] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [281.691271] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [281.691620] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [281.691954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [281.692344] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [281.692750] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [281.701629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [281.701935] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [281.702191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [281.702446] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [281.702756] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.703184] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.703617] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [281.704039] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [281.704478] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [281.704901] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [281.705324] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [281.705760] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [281.706182] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [281.706612] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [281.707029] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [281.707449] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [281.708553] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [281.708997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [281.709428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [281.709872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [281.710303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [281.710744] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [281.711173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [281.711610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [281.712040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [281.712483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [281.712915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [281.713344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [281.713774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [281.714192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [281.714624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [281.715055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.715496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [281.715924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [281.716340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.716774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [281.717191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.717622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [281.718038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [281.718463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [281.718893] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [281.719343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.719895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [281.720350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [281.720791] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.721227] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [281.721668] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [281.722100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [281.722676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [281.723115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [281.723559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [281.724017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [281.724573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [281.725018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [281.725469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [281.725907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [281.727206] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [281.728751] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [281.729223] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [281.729668] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [281.730102] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <6> [281.731462] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [281.731280] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [281.732095] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [281.732499] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [281.732784] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [281.733051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [281.733317] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [281.733599] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [281.733864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [281.734192] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [281.734480] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [281.734818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [281.735085] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [281.735351] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [281.735648] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [281.736032] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [281.736440] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [281.736863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [281.737281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [281.737696] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [281.742379] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [281.748288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [281.748792] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [281.749252] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [281.757406] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [281.757923] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [281.758334] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [281.758773] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [281.760916] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [281.761348] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [281.761790] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [281.762201] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [281.762650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [281.763069] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [281.764103] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [281.764518] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [281.764879] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [281.765135] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [281.765388] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [281.765683] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [281.766010] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [281.766618] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [281.766963] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [281.767266] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [281.777622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [281.777947] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [281.778212] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [281.985383] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [281.986287] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [281.988076] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [281.992000] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [282.012721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [282.012766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [282.012792] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [282.013164] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [282.014515] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [282.016240] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [282.018190] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [282.019590] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [282.021946] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [282.023389] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [282.025113] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [282.026597] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [282.027996] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [282.029649] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [282.032551] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [282.034027] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [282.038998] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [282.040527] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [282.042090] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [282.045333] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [282.046861] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [282.051048] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [282.052668] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [282.054169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [282.058614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [282.060726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [282.063411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [282.065141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [282.066755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [282.068294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [282.069965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [282.071443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [282.073041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [282.074702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [282.076368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [282.078537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [282.080933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [282.083175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [282.085247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [282.086674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [282.088721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [282.090972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [282.093040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [282.095079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [282.096915] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [282.098774] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [282.100528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [282.101874] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [282.102833] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [282.104113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [282.105266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [282.106399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [282.107862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [282.109339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [282.110480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [282.111321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [282.111989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [282.112762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [282.113623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [282.114455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [282.115338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [282.116204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [282.116818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [282.117614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [282.118448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [282.119281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [282.119944] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.120606] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.121123] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [282.121943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [282.122378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [282.122850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [282.123307] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [282.123884] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [282.124226] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [282.124629] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [282.125066] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [282.128509] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [282.128877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [282.129239] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [282.153420] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [282.153725] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [282.153933] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [282.154137] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [282.154343] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [282.154630] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [282.154932] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [282.155198] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [282.155475] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [282.155786] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [282.156049] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [282.156311] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [282.156782] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [282.157181] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [282.157494] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [282.157799] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [282.158065] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [282.158330] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [282.158652] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [282.159153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [282.159426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [282.160115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [282.161049] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [282.161697] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [282.162131] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [282.162623] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [282.167674] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [282.168779] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [282.169259] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [282.170303] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [282.172366] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [282.172523] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [282.173753] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [282.175771] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [282.175921] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [282.176998] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [282.177096] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [282.178106] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [282.179962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [282.180107] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [282.183856] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [282.183982] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [282.192872] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [282.222825] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [282.236259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35 <7> [282.239534] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [282.246705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.247036] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.247324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.247520] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [282.247725] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.247957] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [282.248180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.248395] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [282.248640] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.248853] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [282.249896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.250323] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [282.250780] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [282.253786] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.254993] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [282.255146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [282.255161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [282.255627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected <7> [282.255646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [282.255855] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [282.256001] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2 <7> [282.256030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [282.256042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.256446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [282.256486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [282.256678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.257081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [282.257093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [282.257103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.257541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [282.257730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [282.257742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.258155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [282.258166] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.258174] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [282.258183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [282.258191] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [282.258199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [282.258206] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [282.258265] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.258285] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.258395] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.258410] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [282.261679] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [282.262166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [282.262610] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [282.263051] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [282.263521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [282.263956] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [282.264389] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [282.264796] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [282.265190] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [282.265650] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [282.266080] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [282.266519] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [282.266937] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [282.267357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [282.267799] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [282.268215] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [282.268662] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [282.269100] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [282.269556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [282.269973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [282.270399] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [282.270841] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [282.271821] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [282.271963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [282.271978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [282.272394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected <7> [282.272409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [282.272421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [282.272865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [282.273103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [282.273117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [282.273547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [282.273716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [282.273729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [282.274151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [282.274163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [282.274173] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [282.274600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [282.274787] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [282.274797] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no <7> [282.274807] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [282.274815] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [282.274823] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [282.274831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [282.274896] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [282.274916] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [282.275015] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [282.275045] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [282.275202] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [282.276558] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [282.276998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [282.277434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [282.279504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [282.279973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [282.280419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [282.281175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [282.281393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [282.281698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [282.281940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [282.282135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [282.282329] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [282.282548] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [282.282808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [282.283003] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [282.283199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [282.283393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [282.283604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [282.283865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [282.284059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [282.284253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [282.284447] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [282.284800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [282.285025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [282.285220] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [282.285414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [282.285725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [282.286048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [282.286368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [282.286712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [282.287039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [282.287368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [282.287710] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [282.288042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [282.288373] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [282.288712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [282.289038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [282.289361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [282.289714] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [282.290044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [282.290374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [282.290730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [282.291057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [282.291387] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [282.291737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [282.292065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [282.292395] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [282.292749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [282.293072] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [282.293401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [282.293754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [282.294084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [282.294414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [282.294758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [282.295084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [282.295413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [282.295761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [282.296090] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [282.296423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [282.296778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [282.297102] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [282.297426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [282.297778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [282.298108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [282.298439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [282.298790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [282.299120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [282.299452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [282.299797] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [282.299802] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [282.299807] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [282.313733] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [282.315781] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [282.316328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [282.317704] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [282.319357] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [282.351375] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.351766] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.352432] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [282.352709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.353023] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.353252] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [282.353505] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.353810] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [282.354036] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <6> [282.372827] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36 <6> [282.390213] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37 <6> [282.401618] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38 <7> [283.464754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.576882] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off <7> [284.577276] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [284.577619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.578299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.578824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.579408] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [284.579978] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [284.580368] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [284.581529] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [284.581914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.582808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [284.588684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [284.743386] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [284.769800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [284.778968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [284.779415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.779857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.779944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [284.780447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [284.781016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.781430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [284.781833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.782191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [284.783373] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.796338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.796792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.797118] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.797435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.798206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.916865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.917276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [284.918108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.918766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [284.922554] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [284.930366] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.930933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.931151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [284.931372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.931639] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.931881] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [284.932086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.932305] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.932657] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [284.933290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [284.934382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [284.934804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.935179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.935973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [285.018766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [285.019156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [285.019953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [285.020890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [285.021870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [285.022595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [285.023266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [285.024655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [285.025381] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [285.065203] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [285.085163] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [285.092899] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [285.099851] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [285.105141] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [285.108902] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [285.139770] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [285.140074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [285.149658] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [285.609761] [IGT] Reloading i915 as normal <5> [286.445107] Setting dangerous option force_probe - tainting kernel <6> [286.457737] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0 <7> [286.459450] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K <7> [286.460032] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [286.460301] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH <7> [286.460587] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [286.460997] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [286.461614] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [286.461975] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz <7> [286.463178] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [286.463417] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [286.463662] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [286.463925] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [286.463936] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [286.464642] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [286.464698] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047 <7> [286.464947] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [286.465178] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a <7> [286.465367] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a <7> [286.466333] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018 <7> [286.466704] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [286.466965] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [286.467220] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [286.467523] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [286.476551] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [286.476826] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [286.477074] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [286.477321] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [286.477615] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.478015] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.478404] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no <7> [286.478827] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no <7> [286.479221] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no <7> [286.479490] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no <7> [286.479793] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes <7> [286.480113] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no <7> [286.480522] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3 <7> [286.480915] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [286.481327] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0 <7> [286.481739] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7> [286.482679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [286.483108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203 <7> [286.483607] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [286.484045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [286.484459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [286.484888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [286.485304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848) <7> [286.485759] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [286.486169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [286.486599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [286.487012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [286.487423] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136) <7> [286.487830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [286.488227] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [286.488639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [286.489049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.489457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [286.489877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [286.490274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.490692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [286.491089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.491489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [286.491901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [286.492303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [286.492733] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [286.493166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.493690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [286.494126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [286.494557] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.494966] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [286.495369] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [286.495787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [286.496314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [286.496745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [286.497157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [286.497598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [286.498111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [286.498538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [286.498951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [286.499371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [286.500612] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <7> [286.502077] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7> [286.502528] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0 <7> [286.502937] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP) <7> [286.503343] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [286.504966] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [286.505888] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [286.506435] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <6> [286.507319] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [286.507412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7> [286.507875] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec) <7> [286.508304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec) <7> [286.508750] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec) <7> [286.509174] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec) <7> [286.509614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec) <7> [286.510039] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec) <7> [286.510463] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec) <7> [286.510911] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec) <7> [286.511349] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec) <7> [286.511785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec) <7> [286.512179] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec) <7> [286.512631] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec) <7> [286.513053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec) <7> [286.513475] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec) <7> [286.513911] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec) <7> [286.518982] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available. <7> [286.522937] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [286.523381] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT) <7> [286.523891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A] <7> [286.529540] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [286.529996] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [286.530409] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [286.530842] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [286.531943] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [286.532384] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [286.532847] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP <7> [286.533259] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [286.533711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0 <7> [286.534122] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0 <7> [286.534867] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0 <7> [286.535348] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.535791] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.536178] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.536609] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.537023] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.537481] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.538324] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [286.538795] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [286.539247] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [286.549542] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [286.550040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [286.550441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [286.753023] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [286.753404] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [286.754280] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00 <7> [286.755653] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1 <7> [286.761931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.761941] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [286.761947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [286.762033] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.762297] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.762563] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static <7> [286.762940] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control <7> [286.763217] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937 <7> [286.763670] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [286.763963] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [286.764212] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [286.764596] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [286.764974] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [286.765399] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [286.766220] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT) <7> [286.766680] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B] <7> [286.767654] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.767947] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B] <7> [286.768217] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [286.768892] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT) <7> [286.769192] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C] <7> [286.769918] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported <7> [286.770224] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C] <7> [286.770557] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [286.771404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled <7> [286.771903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled <7> [286.772301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled <7> [286.772631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [286.772965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A <7> [286.773375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A <7> [286.773726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B <7> [286.774043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B <7> [286.774337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B <7> [286.774676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C <7> [286.775013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C <7> [286.775303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C <7> [286.775635] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A <7> [286.776021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A <7> [286.776304] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A <7> [286.776602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B <7> [286.776924] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C <7> [286.777219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A <7> [286.777482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A <7> [286.777791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B <7> [286.778108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C <7> [286.778401] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [286.778804] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [286.779116] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [286.779429] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [286.779862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled <7> [286.780187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled <7> [286.780526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled <7> [286.780877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled <7> [286.781193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled <7> [286.781472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [286.781766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz <7> [286.782049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz <7> [286.782336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz <7> [286.782769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz <7> [286.783174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz <7> [286.783591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz <7> [286.783993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz <7> [286.784270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz <7> [286.784547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz <7> [286.784925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz <7> [286.785324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz <7> [286.785740] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.786130] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.786522] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [286.787202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state] <7> [286.787539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state] <7> [286.787838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state] <7> [286.788171] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [286.788687] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [286.789031] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [286.789391] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [286.789806] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7> [286.792363] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0 <7> [286.792690] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0 <7> [286.792946] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0 <7> [286.814260] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7> [286.814543] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7> [286.814750] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7> [286.814953] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7> [286.815159] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8 <7> [286.815427] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108 <7> [286.815731] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208 <7> [286.816131] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308 <7> [286.816544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8 <7> [286.816952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8 <7> [286.817349] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108 <7> [286.817776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208 <7> [286.818094] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308 <7> [286.818377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8 <7> [286.818776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8 <7> [286.819110] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108 <7> [286.819375] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208 <7> [286.819714] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308 <7> [286.820043] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8 <7> [286.820572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset] <7> [286.820901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset] <7> [286.821180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset] <7> [286.821703] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [286.822332] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B] <7> [286.822816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C] <7> [286.823236] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [286.831658] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs <7> [286.835335] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered <7> [286.835863] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [286.838027] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [286.841383] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event <7> [286.841590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs <7> [286.844249] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [286.846888] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event <7> [286.847147] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs <7> [286.848509] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event <7> [286.848757] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs <7> [286.850355] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [286.853738] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event <7> [286.853849] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs <7> [286.855236] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event <6> [286.855368] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7> [286.860488] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [286.893034] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [286.902757] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39 <7> [286.904878] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [286.910388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [286.911887] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping <7> [286.912341] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping <7> [286.912787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping <7> [286.913190] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config <7> [286.914385] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [286.915570] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.916196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [286.917667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.918032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.918492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.918988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.918999] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.919394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.921762] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [286.923390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.923403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.924019] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.924422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [286.929023] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.929484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [286.932125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.932584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.933176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.933639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.933652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.934160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.939540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.939554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.940020] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [286.941102] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [286.941757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [286.941773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [286.942815] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.943163] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.943482] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.944439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.944453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [286.944461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [286.944519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [286.944927] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.945196] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.946912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected <7> [286.946949] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [286.947335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [286.947346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.947357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.947370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [286.947381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [286.952595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [286.952617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [286.952629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [286.953759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.954188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [286.954831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [286.955296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.955307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.955717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [286.961991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [286.962007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [286.962932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [286.962950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [286.962959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [286.967364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [286.967379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [286.967388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [286.968093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.968507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [286.969102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [286.969794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.969803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [286.970099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [286.973633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [286.973644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [286.973984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [286.973995] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [286.974002] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [286.974008] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [286.974013] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [286.974019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [286.974060] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [286.974085] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [286.974091] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [286.974113] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [286.974255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [286.974308] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one <7> [286.980978] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000 <6> [286.982331] fbcon: i915drmfb (fb0) is primary device <6> [286.984484] Console: switching to colour frame buffer device 200x56 <6> [286.984597] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [286.984779] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [286.984796] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [286.984612] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9 <7> [286.985070] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0 <7> [286.985566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [286.985475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7> [286.985590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [286.985944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no <7> [286.986301] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [286.986374] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no <7> [286.986774] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [286.986858] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7> [286.987230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [286.987321] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7> [286.987795] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no <7> [286.988180] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7> [286.988631] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7> [286.989052] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7> [286.989464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7> [286.989857] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [286.989871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [286.989889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [286.989876] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7> [286.989953] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [286.990335] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7> [286.990416] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [286.990820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7> [286.990889] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [286.991286] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes <7> [286.991725] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7> [286.992138] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7> [286.992545] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7> [286.992942] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7> [286.993345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no <7> [286.993762] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz <7> [286.994227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [286.994249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [286.994261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [286.994273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [286.994284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [286.995441] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7> [286.995939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [286.996362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [286.997211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [286.997669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [286.998090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [286.998850] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9 <7> [286.999180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [286.999198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [286.999180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9 <7> [286.999210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [286.999554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9 <7> [286.999876] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0 <7> [287.000147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.000219] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0 <7> [287.000585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2 <7> [287.000599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.000937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21 <7> [287.001232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.001295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000 <7> [287.001661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE <7> [287.001956] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7> [287.002276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7> [287.002541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.002553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.002606] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39 <7> [287.002965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7> [287.002992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.003332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7> [287.003667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7> [287.003959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7> [287.004249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7> [287.004543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7> [287.004835] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7> [287.005138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7> [287.005438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7> [287.005743] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no <7> [287.006027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no <7> [287.006320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7> [287.006620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7> [287.006810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.006822] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.006942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7> [287.007350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.007366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.007297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no <7> [287.007377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.007683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no <7> [287.008019] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7> [287.008343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7> [287.008707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes <7> [287.009036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7> [287.009362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no <7> [287.009712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7> [287.010045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7> [287.010377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no <7> [287.010738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no <7> [287.011056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no <7> [287.011377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7> [287.011725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no <7> [287.012042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7> [287.012348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7> [287.012693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7> [287.013011] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7> [287.013331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no <7> [287.013616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes <7> [287.013935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7> [287.014185] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7> [287.014431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7> [287.014635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.014653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.014664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.014750] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7> [287.015107] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7> [287.015459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403 <7> [287.015428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.015826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001 <7> [287.015919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.016176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3 <7> [287.016575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007 <7> [287.016548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.017014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.016937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000 <7> [287.017024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.017286] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000 <7> [287.017473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.017656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24 <7> [287.018005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8 <7> [287.018325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7> [287.018644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7> [287.018932] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes <6> [287.019229] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [287.019236] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [287.019244] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [287.021602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.021712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.022159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.022173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [287.022183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [287.022192] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [287.022200] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [287.022207] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [287.023316] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.023367] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [287.023378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [287.023465] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [287.024866] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [287.025284] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [287.025642] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [287.025970] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [287.026274] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [287.026636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [287.026966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [287.027258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [287.027566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [287.027860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [287.028154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [287.028451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [287.028757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.029060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [287.029357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.029665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.029965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.030267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.030574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.030872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.031169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.031468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.031781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [287.032142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.032416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [287.032740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [287.033043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [287.033340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [287.033666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [287.033988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [287.034351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [287.034755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [287.035125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [287.035490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [287.035861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [287.036096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [287.036332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [287.036634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [287.036979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [287.037338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [287.037732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state <7> [287.038095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [287.038428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.038810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [287.039173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.039563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [287.039922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [287.040294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [287.040685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [287.041055] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [287.042049] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [287.042419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [287.042798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [287.043153] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <6> [287.043653] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [287.043547] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [287.043900] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [287.044257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [287.044706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [287.045073] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [287.045323] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [287.045648] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [287.046015] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [287.046380] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [287.046763] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [287.047137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [287.047536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [287.047894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [287.048145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [287.048390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [287.048768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [287.049136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [287.049532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [287.049900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [287.050267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [287.050646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [287.050970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [287.051224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [287.051469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [287.051839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [287.052208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [287.052596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [287.052963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [287.053323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [287.053670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [287.053920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [287.054203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [287.054589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [287.054960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [287.055327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.055714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.056076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.056362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.056692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [287.057057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [287.057427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [287.057812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [287.058177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [287.058559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [287.058913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [287.059233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [287.059483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [287.059755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [287.060112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.060481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.060872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [287.061242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [287.061620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [287.061974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [287.062217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [287.062463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [287.062845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [287.063211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [287.068617] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [287.071652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [287.072037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [287.072400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [287.072744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [287.072979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [287.073209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [287.073612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [287.073971] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [287.074329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [287.075636] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [287.076053] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [287.076776] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [287.077223] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [287.077529] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [287.087527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.087811] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [287.088074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b <7> [287.295719] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [287.296408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [287.298193] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.300660] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [287.301635] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [287.303175] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [287.303706] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [287.304190] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [287.306692] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [287.307309] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [287.307965] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [287.310373] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [287.311045] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [287.311729] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [287.316193] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [287.317163] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [287.319099] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [287.321571] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [287.322486] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [287.324262] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [287.329307] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 386 us, max time under evasion is 250 us <7> [287.338854] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [287.345133] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [287.348805] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [287.352127] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [287.360904] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7> [287.361882] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.361980] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [287.362014] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [287.362368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.362422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.363308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [287.373397] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [287.374169] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.375468] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.376809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.378866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.378913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.378949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.379098] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.380733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.382487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.388160] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [287.391817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.391877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.391935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.391994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.392046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.399185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.399260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.399313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.402573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.404353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.406273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.408209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.408258] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.409943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.416603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.416638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.417778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.417818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.417850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.423151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.423182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.423204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.424665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.425378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.427337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.428165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.428187] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.429059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.433472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.433493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.434265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.434288] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes <7> [287.434303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no <7> [287.434316] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no <7> [287.434329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no <7> [287.434341] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no <7> [287.434424] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [287.434472] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800 <7> [287.434486] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [287.434577] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0) <7> [287.434919] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [287.436537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.436569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.437623] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.438194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.438768] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.440685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.440702] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.440713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.440758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.441240] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.441812] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.444887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.444904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.444919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.445077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.445091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.449654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.449996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.450041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.451484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.452011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.453865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.454555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.454568] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.455044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.458663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.458755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.459253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.459591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.459604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.464124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.464215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.464224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.464768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.465141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.465679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.466083] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.466093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.466443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.466780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.467190] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.467573] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [287.467955] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.468340] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.468971] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [287.469350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.469735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.469759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.469919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.470125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.470296] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [287.477466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.477484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.482007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.482780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.482793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.483471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.483846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [287.484391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.484817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.484828] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.485139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [287.488277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.488289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.488718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.489589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.489600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.494037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.495096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.495109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.495854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.496214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.496836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.497236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.497246] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.497692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.501208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.501220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.501836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.502777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] <7> [287.502791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1] <7> [287.503233] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [287.503620] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [287.503977] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [287.504482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [287.504494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor <7> [287.504520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0 <7> [287.504609] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no <7> [287.504968] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [287.505320] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [287.507053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes: <7> [287.507066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [287.507076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [287.507138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] <7> [287.507148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [287.511777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected <7> [287.511834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] <7> [287.511845] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [287.512480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.512907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <6> [287.514092] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <7> [287.515835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [287.516255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.516267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.516688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <6> [287.517917] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <6> [287.521131] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <7> [287.522310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [287.522322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [287.522761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected <7> [287.522801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] <7> [287.522809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [287.527168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected <7> [287.527223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] <7> [287.527235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [287.528050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.528443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [287.529133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [287.529599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.529611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [287.529967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [287.533263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [287.533275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [287.533836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected <7> [287.534593] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142] <7> [288.582561] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A] <7> [288.582762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [288.583187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [288.583591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [288.583986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [288.584366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [288.584764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [288.585145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [288.585569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.585995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [288.586420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.586858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.587286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.587725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.588153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.588593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.589020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.589452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.589837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [288.590215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.590606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [288.590989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [288.591369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [288.591759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [288.592137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [288.592526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [288.592838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [288.593085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [288.593465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [288.593879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [288.594236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [288.594641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [288.595019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [288.595398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [288.595806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [288.596186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [288.596568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [288.596880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [288.597246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [288.597623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [288.597909] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [288.598158] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [288.598453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [288.598834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [288.599211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [288.599596] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [288.599971] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.600340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.600724] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [288.601194] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [288.601631] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz <7> [288.601993] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [288.602231] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [288.602493] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [288.602880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [288.603250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [288.603628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [288.603988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [288.604592] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [288.606091] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [288.740620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [288.815945] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [288.817900] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [288.823932] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [288.824972] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [288.825980] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [288.828437] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [288.829815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [288.881151] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [288.882132] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [288.883022] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [288.883356] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [288.885144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [288.889137] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [288.889216] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [288.891024] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [288.891631] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [288.892163] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [288.894864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [288.896364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [288.897892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [288.899427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [288.900915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [288.902253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [288.903198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [288.904328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [288.905854] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [288.907244] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [288.909836] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [288.913042] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B] <7> [288.914664] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C] <7> [289.016176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [289.017937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [289.019501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [289.021453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [289.024457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [289.043943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [289.132235] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [289.133225] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000 <7> [289.134083] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000 <7> [289.135381] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [289.136453] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A] <7> [289.137347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [289.139430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [289.141012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [289.142558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [289.144072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288) <7> [289.145355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [289.146823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [289.148281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.149440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360) <7> [289.150590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.151580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.152813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.154146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.155659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.156735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.158224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.159420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.160551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852) <7> [289.161642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.162752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [289.163927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360) <7> [289.164990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [289.165879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360) <7> [289.166984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [289.168010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [289.169145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [289.170548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [289.171910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [289.173268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808) <7> [289.174623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852) <7> [289.175954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852) <7> [289.177077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [289.178429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [289.179776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [289.181137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [289.182485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [289.183859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250) <7> [289.184928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250) <7> [289.186084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [289.187424] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [289.188992] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [289.190319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856 <7> [289.191670] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36 <7> [289.192928] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [289.194037] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 <7> [289.195137] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 <7> [289.196006] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 <7> [289.197462] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz <7> [289.198636] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz <7> [289.199693] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [289.200497] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [289.201367] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [289.202702] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0 <7> [289.203759] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0 <7> [289.204902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset] <7> [289.205806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [289.206916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [289.207829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [289.208954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [289.209832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [289.211023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [289.212228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64 <7> [289.213366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [289.214300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [289.215369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [289.216238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [289.217291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [289.218209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [289.219303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8 <7> [289.220176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7> [289.221373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7> [289.222322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7> [289.223275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7> [289.224201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7> [289.225120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [289.226147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [289.227216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7> [289.228099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7> [289.229249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.230361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa <7> [289.231445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.232337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa <7> [289.233395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa <7> [289.234274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250 <7> [289.235395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0 <7> [289.236307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [289.237381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [289.238570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [289.239672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0 <7> [289.240483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [289.241396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [289.242390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [289.243270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.244342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.245249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [289.245960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [289.246657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [289.247281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [289.247918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [289.248539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [289.249190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [289.249805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [289.262645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [289.272894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [289.273184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [289.273785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [289.274462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [289.275168] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1 <7> [289.276073] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [289.276362] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [289.276676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [289.277045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [289.277465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [289.277910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [289.278335] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [289.278809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [289.279212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [289.279716] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A] <7> [289.280123] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [289.280853] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on <7> [289.281392] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (103 ms remaining) <7> [289.392001] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [289.401663] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.402149] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on <7> [289.402721] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003 <7> [289.452143] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [289.453124] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [289.454013] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [289.454996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [289.603859] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [289.605144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [289.607832] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.609958] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on <7> [289.611179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b <7> [289.616976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00 <7> [289.618211] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [289.620837] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [289.621810] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [289.622793] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [289.626464] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK <7> [289.627985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support <7> [289.629447] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2 <7> [289.633864] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1 <7> [289.635402] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1 <7> [289.636980] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000 <7> [289.641157] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [289.642603] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [289.645209] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [289.648601] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [289.650087] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [289.652198] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37 <7> [289.656970] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 336 us, max time under evasion is 250 us <7> [289.664444] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1 <7> [289.671359] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [289.673483] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [289.679701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1] <7> [289.681339] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7> [289.687582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1] <7> [289.689629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.691044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [289.693617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [289.695181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.695220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.697271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [289.704333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [289.704379] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [289.706488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2] <7> [289.712459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2] <7> [289.714930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.716356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [289.718417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [289.719997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.720036] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [289.722209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [289.729066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [289.729113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [289.833092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.833955] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.846698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.872099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.872471] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.885677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [289.938290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [289.939226] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [289.946827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.947205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.947825] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7> [289.948285] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.949108] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.949607] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7> [289.950068] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.950416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.950728] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [289.951890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [290.045102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [290.047352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [290.048783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [290.050162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <6> [290.058265] Console: switching to colour dummy device 80x25 <7> [290.060591] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed <7> [290.060930] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0 <7> [290.062327] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [290.063641] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.065452] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.066884] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [290.069025] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 <7> [290.081473] i915 0000:00:02.0: [drm:drm_client_release] fbdev <7> [290.089153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [290.090356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [290.091659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [290.092882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [290.094053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0) <7> [290.095215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [290.096446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [290.097510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.098414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0) <7> [290.099874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.101035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.102127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.103042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.104207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.105124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.106186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.107091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.108183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0) <7> [290.109352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.110448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [290.111356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0) <7> [290.112416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [290.113293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0) <7> [290.114368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [290.115255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [290.116310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [290.117345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [290.118663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [290.119655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0) <7> [290.120797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0) <7> [290.121677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0) <7> [290.122753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [290.123630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [290.124708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [290.125641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [290.126877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [290.127885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0) <7> [290.129228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0) <7> [290.130576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [290.131929] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset <7> [290.133291] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0 <7> [290.134639] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [290.135295] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0 <7> [290.136053] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz <7> [290.136959] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [290.137854] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [290.138725] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [290.139619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset] <7> [290.140418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [290.141038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no <7> [290.141891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no <7> [290.144421] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [290.351754] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0 <7> [290.353959] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [290.367234] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off <7> [290.367672] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000 <7> [290.368418] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time <7> [290.368750] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short <7> [290.369686] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000 <7> [290.421190] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010 <7> [290.422192] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long <7> [290.422290] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [290.423211] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [290.424757] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [290.424738] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A] <7> [290.426859] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [290.427265] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A] <7> [290.428492] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [290.433812] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A] <7> [290.435155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B] <7> [290.436298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A] <7> [290.437770] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B] <7> [290.439102] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C] <7> [290.440876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C] <7> [290.442455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A] <7> [290.443945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B] <7> [290.445468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C] <7> [290.447128] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1] <7> [290.450165] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A] <7> [290.516256] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915] <7> [290.569222] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs <7> [290.582584] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs <7> [290.585564] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs <7> [290.598421] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs <7> [290.602426] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs <7> [290.633562] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (290 ms remaining) <7> [290.928192] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000 <7> [291.006979] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <6> [291.618494] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS <6> [291.619649] [IGT] i915_pm_rpm: exiting, ret=0

<6> [276.710126] Console: switching to colour dummy device 80x25

<7> [276.714631] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [276.715442] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [276.715457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [276.716159] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.716460] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.716806] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.717211] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.717223] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [276.717231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [276.717268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [276.717680] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.718030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.719966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [276.719976] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.719984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.720082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.720089] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.724447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.724538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.724546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.725282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.725576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.726118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.726539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.726549] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.726901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.730081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.730091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.730364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.730498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.730510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.734880] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.734963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.734971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.735947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.736207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.736622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.736917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.736925] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.737138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.740207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.740219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.740546] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.747861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.747872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.752218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.753125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.753137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.753836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.754169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.754578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.754872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.754881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.755229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.758427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.758436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.758824] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.759772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.759783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.764248] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.765146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.765158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.765817] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.766189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.766644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.766912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.766919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.767166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.770318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.770326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.770626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.771379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [276.771403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [276.771822] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [276.772159] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [276.772512] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [276.772879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [276.772887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [276.772892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [276.772917] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [276.773143] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [276.773367] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [276.774340] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [276.774348] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [276.774356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [276.774384] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [276.774410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [276.778817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [276.778850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [276.778858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [276.779348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.779579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [276.780102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [276.780530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.780539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.780880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [276.784013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [276.784022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [276.784258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [276.784289] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [276.784297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [276.788642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [276.788674] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [276.788681] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [276.789170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.789376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [276.789794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [276.790100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.790112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [276.790316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [276.793366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [276.793381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [276.793662] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [276.794250] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:143]

<7> [277.080117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [277.837893] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [277.838387] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [277.839479] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [277.840225] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [277.840500] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [277.840761] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [277.841004] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [277.841245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [277.841522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.841782] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [277.842023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.842262] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.842523] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.842789] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.843031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.843272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.843532] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.843793] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.844035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.844277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.844543] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [277.844803] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [277.845044] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [277.845284] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [277.845582] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [277.845843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [277.846158] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [277.846437] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [277.846719] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [277.847012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [277.847272] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [277.847555] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [277.847828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [277.848129] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [277.848380] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [277.848676] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [277.848941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [277.849182] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [277.849448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [277.849714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [277.849962] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [277.850204] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [277.850525] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [277.850796] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [277.851030] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [277.851261] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [277.851527] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.851782] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.852027] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [277.852344] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [277.852648] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [277.852926] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [277.853162] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [277.853399] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [277.853774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [277.854162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [277.854553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [277.854924] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [277.855547] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [277.857254] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [278.063862] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [278.065750] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [278.086808] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [278.087334] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [278.087893] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [278.088713] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [278.089365] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [278.140375] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.141067] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.141533] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [278.142843] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.143014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [278.146715] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.147052] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [278.148092] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.148960] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [278.150356] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [278.153019] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [278.154165] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [278.155065] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [278.156122] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [278.157052] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [278.158090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [278.158990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [278.160051] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [278.161097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [278.162195] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [278.164257] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [278.167787] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [278.169131] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [278.272112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [278.273918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [278.275025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [278.276527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [278.278726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [278.295546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [278.382331] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [278.383577] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [278.385074] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [278.386251] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [278.387479] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [278.388268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [278.389166] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [278.390809] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [278.391915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [278.393352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [278.394675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [278.396155] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [278.397714] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [278.399124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [278.400492] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [278.401848] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [278.402943] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [278.404286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [278.405510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [278.407075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [278.408449] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [278.409791] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [278.411194] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [278.412720] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [278.413788] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [278.415221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [278.416712] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [278.418062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [278.419401] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [278.420730] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [278.422066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [278.423176] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [278.424058] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [278.425109] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [278.426009] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [278.427112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [278.428034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [278.429105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [278.429974] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [278.431074] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [278.432023] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [278.433320] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [278.434286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [278.435391] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [278.436308] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [278.437648] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [278.438688] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [278.439558] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [278.440645] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [278.441513] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [278.442812] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [278.443826] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [278.445082] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [278.446101] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [278.447149] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [278.448051] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [278.449109] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [278.449967] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [278.451144] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [278.452283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [278.453378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [278.454337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [278.455392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [278.456256] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [278.457319] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [278.458229] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [278.459309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [278.460499] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [278.461346] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [278.462495] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [278.463309] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [278.464215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [278.465333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [278.466225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [278.467272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [278.468257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [278.469383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [278.470311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [278.471662] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [278.473009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [278.474334] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [278.475674] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [278.477021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [278.477984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [278.479266] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [278.480627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [278.481977] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [278.483257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [278.484149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [278.484921] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [278.485684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [278.486576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [278.487458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [278.488305] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [278.489201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [278.490089] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [278.490929] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [278.491732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.492278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.492746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [278.493253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [278.493707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [278.494212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [278.494666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [278.495167] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [278.495653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [278.496279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [278.508542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [278.516741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [278.517021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [278.517673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [278.518356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.519134] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [278.519923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [278.520226] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [278.520495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [278.520768] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [278.520999] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [278.521230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [278.521480] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [278.521734] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [278.521964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [278.522375] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [278.522653] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [278.523121] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [278.523572] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (119 ms remaining)

<7> [278.647858] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [278.657672] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.658127] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [278.658649] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [278.708145] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [278.709253] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [278.710266] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [278.711252] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [278.866507] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [278.867779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [278.869076] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.872098] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [278.873744] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [278.880280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [278.881543] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [278.885056] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [278.886693] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [278.888144] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [278.892017] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [278.893507] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [278.894982] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [278.900249] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [278.901370] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [278.902409] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [278.906581] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [278.908028] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [278.910252] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [278.912856] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [278.913788] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [278.915326] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [278.928787] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [278.933798] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [278.935020] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [278.939077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [278.939832] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [278.945509] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [278.945004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [278.947101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.948383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [278.950140] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [278.952123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.952163] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.954032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [278.960175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [278.960217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [278.961657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [278.968842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [278.971183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.972473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [278.974609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [278.975944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.975980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [278.978029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [278.984056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [278.984095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [279.100088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.100859] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.113581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.139171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.139598] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.152605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.186473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.187633] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [279.202585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.203100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.204484] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [279.204809] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.205090] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.205367] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [279.205808] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.206109] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.206386] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [279.207214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [279.289073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [279.289850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [279.290162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [279.290497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [279.292573] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [279.292702] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [279.293188] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [279.293760] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.294246] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.294744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [279.295513] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [279.312351] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [279.313748] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [279.314108] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [279.314506] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [279.315069] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [279.315658] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [279.316221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [279.316812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [279.317369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [279.317955] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [279.318529] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [279.319085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [279.319662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [279.320219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [279.320838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [279.321395] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [279.322041] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [279.322745] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [279.323313] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [279.323908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [279.324485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [279.325046] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [279.325629] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [279.326191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [279.326778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [279.327339] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [279.327946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [279.328527] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [279.329068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [279.329679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [279.330235] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [279.330811] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [279.331365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [279.331939] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [279.332517] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [279.333077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [279.333661] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [279.334221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [279.334798] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [279.335354] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [279.335938] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [279.336518] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [279.337187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [279.337837] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [279.338535] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [279.339092] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [279.339742] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [279.340294] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [279.340887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [279.341464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [279.342018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [279.342594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [279.344661] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [279.551892] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [279.553977] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [279.566243] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [279.567213] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [279.568211] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [279.569400] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [279.570959] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [279.622157] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [279.623133] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [279.624018] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [279.625026] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [279.627205] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [279.627917] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [279.629210] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [279.629996] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [279.631769] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [279.635501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [279.637257] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [279.638744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [279.640302] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [279.641853] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [279.643396] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [279.644980] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [279.646503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [279.648050] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [279.649630] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [279.652822] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [279.716501] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [279.756850] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [279.786714] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [279.790204] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [279.802401] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [279.807673] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [279.831509] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (296 ms remaining)

<7> [280.136091] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [280.166776] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [281.670978] Setting dangerous option force_probe - tainting kernel

<6> [281.683083] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [281.684882] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [281.685286] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [281.685587] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [281.685874] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [281.686182] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [281.686606] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [281.686833] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [281.687850] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [281.688074] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [281.688297] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [281.688530] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [281.688543] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [281.689256] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [281.689311] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [281.689731] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [281.690102] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [281.690430] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [281.691271] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [281.691620] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [281.691954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [281.692344] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [281.692750] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [281.701629] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [281.701935] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [281.702191] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [281.702446] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [281.702756] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.703184] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.703617] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [281.704039] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [281.704478] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [281.704901] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [281.705324] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [281.705760] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [281.706182] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [281.706612] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [281.707029] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [281.707449] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [281.708553] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [281.708997] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [281.709428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [281.709872] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [281.710303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [281.710744] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [281.711173] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [281.711610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [281.712040] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [281.712483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [281.712915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [281.713344] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [281.713774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [281.714192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [281.714624] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [281.715055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.715496] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [281.715924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [281.716340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.716774] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [281.717191] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.717622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [281.718038] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [281.718463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [281.718893] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [281.719343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.719895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [281.720350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [281.720791] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.721227] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [281.721668] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [281.722100] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [281.722676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [281.723115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [281.723559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [281.724017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [281.724573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [281.725018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [281.725469] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [281.725907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [281.727206] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [281.728751] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [281.729223] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [281.729668] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [281.730102] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<6> [281.731462] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [281.731280] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [281.732095] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [281.732499] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [281.732784] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [281.733051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [281.733317] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [281.733599] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [281.733864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [281.734192] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [281.734480] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [281.734818] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [281.735085] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [281.735351] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [281.735648] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [281.736032] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [281.736440] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [281.736863] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [281.737281] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [281.737696] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [281.742379] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [281.748288] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [281.748792] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [281.749252] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [281.757406] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [281.757923] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [281.758334] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [281.758773] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [281.760916] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [281.761348] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [281.761790] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [281.762201] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [281.762650] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [281.763069] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [281.764103] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [281.764518] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [281.764879] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [281.765135] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [281.765388] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [281.765683] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [281.766010] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [281.766618] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [281.766963] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [281.767266] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [281.777622] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [281.777947] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [281.778212] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [281.985383] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [281.986287] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [281.988076] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [281.992000] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [282.012721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [282.012766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [282.012792] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [282.013164] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [282.014515] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [282.016240] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [282.018190] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [282.019590] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [282.021946] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [282.023389] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [282.025113] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [282.026597] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [282.027996] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [282.029649] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [282.032551] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [282.034027] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [282.038998] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [282.040527] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [282.042090] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [282.045333] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [282.046861] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [282.051048] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [282.052668] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [282.054169] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [282.058614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [282.060726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [282.063411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [282.065141] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [282.066755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [282.068294] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [282.069965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [282.071443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [282.073041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [282.074702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [282.076368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [282.078537] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [282.080933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [282.083175] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [282.085247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [282.086674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [282.088721] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [282.090972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [282.093040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [282.095079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [282.096915] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [282.098774] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [282.100528] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [282.101874] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [282.102833] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [282.104113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [282.105266] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [282.106399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [282.107862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [282.109339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [282.110480] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [282.111321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [282.111989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [282.112762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [282.113623] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [282.114455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [282.115338] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [282.116204] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [282.116818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [282.117614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [282.118448] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [282.119281] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [282.119944] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.120606] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.121123] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [282.121943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [282.122378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [282.122850] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [282.123307] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [282.123884] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [282.124226] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [282.124629] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [282.125066] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [282.128509] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [282.128877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [282.129239] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [282.153420] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [282.153725] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [282.153933] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [282.154137] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [282.154343] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [282.154630] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [282.154932] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [282.155198] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [282.155475] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [282.155786] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [282.156049] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [282.156311] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [282.156782] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [282.157181] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [282.157494] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [282.157799] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [282.158065] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [282.158330] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [282.158652] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [282.159153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [282.159426] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [282.160115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [282.161049] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [282.161697] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [282.162131] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [282.162623] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [282.167674] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [282.168779] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [282.169259] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [282.170303] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [282.172366] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [282.172523] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [282.173753] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [282.175771] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [282.175921] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [282.176998] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [282.177096] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [282.178106] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [282.179962] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [282.180107] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [282.183856] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [282.183982] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [282.192872] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [282.222825] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [282.236259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input35

<7> [282.239534] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [282.246705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.247036] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.247324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.247520] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [282.247725] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.247957] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [282.248180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.248395] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [282.248640] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.248853] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [282.249896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.250323] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [282.250780] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [282.253786] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [282.254993] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [282.255146] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [282.255161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [282.255627] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to disconnected

<7> [282.255646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [282.255855] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [282.256001] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:109:eDP-1] EDID changed, epoch counter 2

<7> [282.256030] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [282.256042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.256446] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [282.256486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [282.256678] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.257081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [282.257093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [282.257103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.257541] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [282.257730] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [282.257742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.258155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [282.258166] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.258174] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [282.258183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [282.258191] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [282.258199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [282.258206] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [282.258265] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.258285] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.258395] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.258410] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [282.261679] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [282.262166] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [282.262610] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [282.263051] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [282.263521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [282.263956] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [282.264389] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [282.264796] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [282.265190] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [282.265650] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [282.266080] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [282.266519] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [282.266937] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [282.267357] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [282.267799] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [282.268215] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [282.268662] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [282.269100] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [282.269556] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [282.269973] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [282.270399] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [282.270841] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [282.271821] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [282.271963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [282.271978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [282.272394] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] disconnected

<7> [282.272409] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [282.272421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [282.272865] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [282.273103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [282.273117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [282.273547] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [282.273716] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [282.273729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [282.274151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [282.274163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [282.274173] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [282.274600] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [282.274787] i915 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [282.274797] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? no

<7> [282.274807] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [282.274815] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [282.274823] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [282.274831] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [282.274896] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [282.274916] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [282.275015] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<6> [282.275045] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [282.275202] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [282.276558] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [282.276998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [282.277434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [282.279504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [282.279973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [282.280419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [282.281175] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [282.281393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [282.281698] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [282.281940] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [282.282135] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [282.282329] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [282.282548] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [282.282808] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [282.283003] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [282.283199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [282.283393] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [282.283604] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [282.283865] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [282.284059] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [282.284253] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [282.284447] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [282.284800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [282.285025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [282.285220] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [282.285414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [282.285725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [282.286048] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [282.286368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [282.286712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [282.287039] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [282.287368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [282.287710] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [282.288042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [282.288373] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [282.288712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [282.289038] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [282.289361] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [282.289714] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [282.290044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [282.290374] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [282.290730] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [282.291057] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [282.291387] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [282.291737] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [282.292065] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [282.292395] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [282.292749] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [282.293072] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [282.293401] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [282.293754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [282.294084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [282.294414] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [282.294758] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [282.295084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [282.295413] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [282.295761] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [282.296090] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [282.296423] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [282.296778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [282.297102] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [282.297426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [282.297778] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [282.298108] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [282.298439] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [282.298790] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [282.299120] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [282.299452] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [282.299797] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [282.299802] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [282.299807] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [282.313733] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<6> [282.315781] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [282.316328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [282.317704] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [282.319357] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [282.351375] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.351766] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.352432] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [282.352709] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.353023] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.353252] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [282.353505] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.353810] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [282.354036] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<6> [282.372827] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36

<6> [282.390213] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input37

<6> [282.401618] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input38

<7> [283.464754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.576882] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD off

<7> [284.577276] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [284.577619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.578299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.578824] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.579408] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [284.579978] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [284.580368] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [284.581529] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [284.581914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.582808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [284.588684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [284.743386] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [284.769800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [284.778968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [284.779415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.779857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.779944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [284.780447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [284.781016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.781430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [284.781833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.782191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [284.783373] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.796338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.796792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.797118] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.797435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.798206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.916865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.917276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [284.918108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.918766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [284.922554] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [284.930366] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.930933] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.931151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [284.931372] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.931639] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.931881] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [284.932086] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.932305] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.932657] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [284.933290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [284.934382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [284.934804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.935179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.935973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [285.018766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [285.019156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [285.019953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [285.020890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [285.021870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [285.022595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [285.023266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [285.024655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [285.025381] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [285.065203] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [285.085163] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [285.092899] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [285.099851] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [285.105141] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [285.108902] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [285.139770] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [285.140074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [285.149658] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<5> [286.445107] Setting dangerous option force_probe - tainting kernel

<6> [286.457737] i915 0000:00:02.0: [drm] Found skylake/ult (device ID 1916) integrated display version 9.00 stepping H0

<7> [286.459450] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 1024K

<7> [286.460032] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [286.460301] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH

<7> [286.460587] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [286.460997] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [286.461614] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [286.461975] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 24000 kHz

<7> [286.463178] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [286.463417] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [286.463662] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [286.463925] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [286.463936] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [286.464642] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [286.464698] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 7ff00047

<7> [286.464947] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [286.465178] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 7716 MiB [mem 0x00000000-0x1e24e6fff], io: n/a

<7> [286.465367] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(5): stolen-system: 63 MiB [mem 0x7c000000-0x7fefffff], io: n/a

<7> [286.466333] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79ec6018

<7> [286.466704] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [286.466965] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [286.467220] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [286.467523] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [286.476551] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [286.476826] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [286.477074] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [286.477321] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [286.477615] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.478015] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.478404] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 2, 16Gb+ DIMMs: no

<7> [286.478827] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no

<7> [286.479221] i915 0000:00:02.0: [drm:skl_dram_print_dimm_info.isra.0 [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb+ DIMMs: no

<7> [286.479490] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 2, 16Gb+ DIMMs: no

<7> [286.479793] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] Memory configuration is symmetric? yes

<7> [286.480113] i915 0000:00:02.0: [drm:skl_dram_get_channels_info [i915]] 16Gb+ DIMMs: no

<7> [286.480522] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR3

<7> [286.480915] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [286.481327] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 0

<7> [286.481739] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0

<7> [286.482679] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [286.483108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 203

<7> [286.483607] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [286.484045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [286.484459] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [286.484888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [286.485304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 848)

<7> [286.485759] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [286.486169] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [286.486599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [286.487012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [286.487423] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 136)

<7> [286.487830] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [286.488227] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [286.488639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [286.489049] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.489457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [286.489877] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [286.490274] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.490692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [286.491089] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.491489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [286.491901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [286.492303] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [286.492733] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [286.493166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.493690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [286.494126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [286.494557] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.494966] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [286.495369] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [286.495787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [286.496314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [286.496745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [286.497157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [286.497598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [286.498111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [286.498538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [286.498951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [286.499371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [286.500612] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<7> [286.502077] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0:

<7> [286.502528] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x2fc0

<7> [286.502937] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f004 = 0xb40068 (EVT_HTP)

<7> [286.503343] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [286.504966] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [286.505888] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [286.506435] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<6> [286.507319] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [286.507412] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided

<7> [286.507875] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 17 (17.0 usec)

<7> [286.508304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 26 (26.0 usec)

<7> [286.508750] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 30 (30.0 usec)

<7> [286.509174] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 61 (61.0 usec)

<7> [286.509614] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 75 (75.0 usec)

<7> [286.510039] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM6 latency 81 (81.0 usec)

<7> [286.510463] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM7 latency 97 (97.0 usec)

<7> [286.510911] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 2 (2.0 usec)

<7> [286.511349] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 19 (19.0 usec)

<7> [286.511785] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 28 (28.0 usec)

<7> [286.512179] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 32 (32.0 usec)

<7> [286.512631] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 63 (63.0 usec)

<7> [286.513053] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 77 (77.0 usec)

<7> [286.513475] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM6 latency 83 (83.0 usec)

<7> [286.513911] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM7 latency 99 (99.0 usec)

<7> [286.518982] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 3 display pipes available.

<7> [286.522937] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [286.523381] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI A/PHY A] Using AUX CH A (VBT)

<7> [286.523891] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:108:DDI A/PHY A]

<7> [286.529540] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [286.529996] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [286.530409] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [286.530842] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [286.531943] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [286.532384] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [286.532847] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: HD eDP

<7> [286.533259] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [286.533711] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 10, level 255, controller 0

<7> [286.534122] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:0

<7> [286.534867] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:108:DDI A/PHY A] initial power sequencer: PPS 0

<7> [286.535348] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.535791] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.536178] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.536609] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.537023] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.537481] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.538324] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [286.538795] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [286.539247] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [286.549542] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [286.550040] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [286.550441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [286.753023] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [286.753404] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [286.754280] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 9f 40 00 00

<7> [286.755653] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1

<7> [286.761931] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.761941] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [286.761947] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [286.762033] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using preferred EDID fixed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.762297] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:109:eDP-1] using alternate EDID fixed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.762563] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:109:eDP-1] DRRS type: static

<7> [286.762940] i915 0000:00:02.0: [drm:lpt_setup_backlight [i915]] [CONNECTOR:109:eDP-1] Using native PCH PWM for backlight control

<7> [286.763217] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:109:eDP-1] backlight initialized, disabled, brightness 0/937

<7> [286.763670] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [286.763963] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [286.764212] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [286.764596] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [286.764974] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [286.765399] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [286.766220] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:116:DDI B/PHY B] Using AUX CH B (VBT)

<7> [286.766680] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:116:DDI B/PHY B]

<7> [286.767654] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.767947] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:116:DDI B/PHY B]

<7> [286.768217] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:116:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [286.768892] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:131:DDI C/PHY C] Using AUX CH C (VBT)

<7> [286.769192] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:131:DDI C/PHY C]

<7> [286.769918] i915 0000:00:02.0: [drm:intel_psr_init [i915]] PSR condition failed: Port not supported

<7> [286.770224] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:131:DDI C/PHY C]

<7> [286.770557] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:131:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [286.771404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] hw state readout: disabled

<7> [286.771903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] hw state readout: disabled

<7> [286.772301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] hw state readout: disabled

<7> [286.772631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [286.772965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] hw state readout: disabled, pipe A

<7> [286.773375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] hw state readout: disabled, pipe A

<7> [286.773726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] hw state readout: disabled, pipe B

<7> [286.774043] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] hw state readout: disabled, pipe B

<7> [286.774337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] hw state readout: disabled, pipe B

<7> [286.774676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] hw state readout: disabled, pipe C

<7> [286.775013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] hw state readout: disabled, pipe C

<7> [286.775303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] hw state readout: disabled, pipe C

<7> [286.775635] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [286.776021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:116:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [286.776304] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST A] hw state readout: disabled, pipe A

<7> [286.776602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST B] hw state readout: disabled, pipe B

<7> [286.776924] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:120:DP-MST C] hw state readout: disabled, pipe C

<7> [286.777219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:131:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [286.777482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DP-MST A] hw state readout: disabled, pipe A

<7> [286.777791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:134:DP-MST B] hw state readout: disabled, pipe B

<7> [286.778108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST C] hw state readout: disabled, pipe C

<7> [286.778401] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [286.778804] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [286.779116] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [286.779429] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [286.779862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:eDP-1] hw state readout: disabled

<7> [286.780187] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:117:DP-1] hw state readout: disabled

<7> [286.780526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:126:HDMI-A-1] hw state readout: disabled

<7> [286.780877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:132:DP-2] hw state readout: disabled

<7> [286.781193] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:138:HDMI-A-2] hw state readout: disabled

<7> [286.781472] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [286.781766] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:42:plane 2A] min_cdclk 0 kHz

<7> [286.782049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:51:cursor A] min_cdclk 0 kHz

<7> [286.782336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:57:pipe A] min_cdclk 0 kHz

<7> [286.782769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 1B] min_cdclk 0 kHz

<7> [286.783174] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 2B] min_cdclk 0 kHz

<7> [286.783591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor B] min_cdclk 0 kHz

<7> [286.783993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:82:pipe B] min_cdclk 0 kHz

<7> [286.784270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:plane 1C] min_cdclk 0 kHz

<7> [286.784547] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:92:plane 2C] min_cdclk 0 kHz

<7> [286.784925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:cursor C] min_cdclk 0 kHz

<7> [286.785324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:107:pipe C] min_cdclk 0 kHz

<7> [286.785740] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:57:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.786130] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:82:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.786522] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:107:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [286.787202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [setup_hw_state]

<7> [286.787539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [setup_hw_state]

<7> [286.787838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [setup_hw_state]

<7> [286.788171] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [286.788687] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [286.789031] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [286.789391] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [286.789806] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global

<7> [286.792363] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 8 engine workarounds on rcs'0

<7> [286.792690] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 whitelist workarounds on rcs'0

<7> [286.792946] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 12 context workarounds on rcs'0

<7> [286.814260] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0

<7> [286.814543] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0

<7> [286.814750] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0

<7> [286.814953] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0

<7> [286.815159] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 0: start 0x8

<7> [286.815427] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 1: start 0x108

<7> [286.815731] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 2: start 0x208

<7> [286.816131] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 3: start 0x308

<7> [286.816544] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:57:pipe A] FQ 4: start 0x3c8

<7> [286.816952] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 0: start 0x8

<7> [286.817349] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 1: start 0x108

<7> [286.817776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 2: start 0x208

<7> [286.818094] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 3: start 0x308

<7> [286.818377] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:82:pipe B] FQ 4: start 0x3c8

<7> [286.818776] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 0: start 0x8

<7> [286.819110] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 1: start 0x108

<7> [286.819375] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 2: start 0x208

<7> [286.819714] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 3: start 0x308

<7> [286.820043] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:107:pipe C] FQ 4: start 0x3c8

<7> [286.820572] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [fastset]

<7> [286.820901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:82:pipe B] enable: no [fastset]

<7> [286.821180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:107:pipe C] enable: no [fastset]

<7> [286.821703] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [286.822332] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:82:pipe B]

<7> [286.822816] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:107:pipe C]

<7> [286.823236] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [286.831658] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:109:eDP-1] adding connector to sysfs

<7> [286.835335] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:109:eDP-1] backlight device intel_backlight registered

<7> [286.835863] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:109:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [286.838027] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [286.841383] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:eDP-1] generating connector hotplug event

<7> [286.841590] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:117:DP-1] adding connector to sysfs

<7> [286.844249] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [286.846888] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:117:DP-1] generating connector hotplug event

<7> [286.847147] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:126:HDMI-A-1] adding connector to sysfs

<7> [286.848509] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:126:HDMI-A-1] generating connector hotplug event

<7> [286.848757] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:132:DP-2] adding connector to sysfs

<7> [286.850355] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [286.853738] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:132:DP-2] generating connector hotplug event

<7> [286.853849] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:138:HDMI-A-2] adding connector to sysfs

<7> [286.855236] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:138:HDMI-A-2] generating connector hotplug event

<6> [286.855368] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0

<7> [286.860488] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [286.893034] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [286.902757] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input39

<7> [286.904878] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [286.910388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [286.911887] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:57:pipe A] not active, skipping

<7> [286.912341] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:82:pipe B] not active, skipping

<7> [286.912787] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:107:pipe C] not active, skipping

<7> [286.913190] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] no active fbs found, not using BIOS config

<7> [286.914385] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [286.915570] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:117:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.916196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [286.917667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.918032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.918492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.918988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.918999] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.919394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.921762] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [286.923390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.923403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.924019] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:126:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.924422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [286.929023] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:132:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.929484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [286.932125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.932584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.933176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.933639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.933652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.934160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.939540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.939554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.940020] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:138:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [286.941102] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [286.941757] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [286.941773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [286.942815] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.943163] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.943482] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.944439] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.944453] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [286.944461] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [286.944519] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [286.944927] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.945196] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.946912] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] status updated from unknown to connected

<7> [286.946949] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [286.947335] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [286.947346] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.947357] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.947370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [286.947381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [286.952595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [286.952617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [286.952629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [286.953759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.954188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [286.954831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [286.955296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.955307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.955717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [286.961991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [286.962007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [286.962932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [286.962950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [286.962959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [286.967364] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [286.967379] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [286.967388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [286.968093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.968507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [286.969102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [286.969794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.969803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [286.970099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [286.973633] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [286.973644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [286.973984] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [286.973995] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [286.974002] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [286.974008] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [286.974013] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [286.974019] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [286.974060] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [286.974085] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [286.974091] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [286.974113] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [286.974255] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [286.974308] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] no BIOS fb, allocating a new one

<7> [286.980978] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 3200x1800 fb: 0x00180000

<6> [286.982331] fbcon: i915drmfb (fb0) is primary device

<6> [286.984484] Console: switching to colour frame buffer device 200x56

<6> [286.984597] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [286.984779] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [286.984796] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [286.984612] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 9

<7> [286.985070] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: H0

<7> [286.985566] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [286.985475] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no

<7> [286.985590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [286.985944] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: no

<7> [286.986301] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [286.986374] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: no

<7> [286.986774] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [286.986858] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes

<7> [286.987230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [286.987321] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes

<7> [286.987795] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: no

<7> [286.988180] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes

<7> [286.988631] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no

<7> [286.989052] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes

<7> [286.989464] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no

<7> [286.989857] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [286.989871] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [286.989889] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [286.989876] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes

<7> [286.989953] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [286.990335] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no

<7> [286.990416] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [286.990820] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes

<7> [286.990889] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [286.991286] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: yes

<7> [286.991725] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no

<7> [286.992138] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no

<7> [286.992545] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes

<7> [286.992942] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes

<7> [286.993345] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: no

<7> [286.993762] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 24000 kHz

<7> [286.994227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [286.994249] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [286.994261] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [286.994273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [286.994284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [286.995441] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device

<7> [286.995939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [286.996362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [286.997211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [286.997669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [286.998090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [286.998850] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x1916 rev=0x07 platform=SKYLAKE (subplatform=0x1) gen=9

<7> [286.999180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [286.999198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [286.999180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 9

<7> [286.999210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [286.999554] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 9

<7> [286.999876] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: H0

<7> [287.000147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.000219] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: H0

<7> [287.000585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 2

<7> [287.000599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.000937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x21

<7> [287.001232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.001295] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x11000

<7> [287.001661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: SKYLAKE

<7> [287.001956] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48

<7> [287.002276] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2

<7> [287.002541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.002553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.002606] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 39

<7> [287.002965] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no

<7> [287.002992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.003332] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no

<7> [287.003667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no

<7> [287.003959] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes

<7> [287.004249] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no

<7> [287.004543] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no

<7> [287.004835] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes

<7> [287.005138] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes

<7> [287.005438] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no

<7> [287.005743] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: no

<7> [287.006027] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: no

<7> [287.006320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes

<7> [287.006620] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no

<7> [287.006810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.006822] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.006942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no

<7> [287.007350] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.007366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.007297] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: no

<7> [287.007377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.007683] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: no

<7> [287.008019] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no

<7> [287.008343] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no

<7> [287.008707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: yes

<7> [287.009036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes

<7> [287.009362] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: no

<7> [287.009712] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no

<7> [287.010045] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no

<7> [287.010377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: no

<7> [287.010738] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: no

<7> [287.011056] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: no

<7> [287.011377] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no

<7> [287.011725] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: no

<7> [287.012042] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes

<7> [287.012348] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no

<7> [287.012693] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes

<7> [287.013011] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes

<7> [287.013331] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: no

<7> [287.013616] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: yes

<7> [287.013935] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no

<7> [287.014185] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no

<7> [287.014431] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no

<7> [287.014635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.014653] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.014664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.014750] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no

<7> [287.015107] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled

<7> [287.015459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 40403

<7> [287.015428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.015826] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice total: 1, mask=0001

<7> [287.015919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.016176] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 3

<7> [287.016575] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice0: 3 subslices, mask=00000007

<7> [287.016548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.017014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.016937] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice1: 0 subslices, mask=00000000

<7> [287.017024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.017286] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: slice2: 0 subslices, mask=00000000

<7> [287.017473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.017656] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 24

<7> [287.018005] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 8

<7> [287.018325] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no

<7> [287.018644] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no

<7> [287.018932] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: yes

<6> [287.019229] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [287.019236] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [287.019244] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [287.021602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.021712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.022159] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.022173] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [287.022183] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [287.022192] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [287.022200] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [287.022207] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [287.023316] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.023367] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [287.023378] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [287.023465] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [287.024866] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [287.025284] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [287.025642] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [287.025970] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [287.026274] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [287.026636] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [287.026966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [287.027258] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [287.027566] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [287.027860] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [287.028154] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [287.028451] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [287.028757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.029060] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [287.029357] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.029665] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.029965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.030267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.030574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.030872] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.031169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.031468] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.031781] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.032142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.032416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [287.032740] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [287.033043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [287.033340] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [287.033666] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [287.033988] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [287.034351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [287.034755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [287.035125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [287.035490] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [287.035861] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [287.036096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [287.036332] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [287.036634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [287.036979] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [287.037338] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [287.037732] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dpll_hw_state

<7> [287.038095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [287.038428] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.038810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [287.039173] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.039563] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [287.039922] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [287.040294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [287.040685] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [287.041055] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [287.042049] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [287.042419] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [287.042798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [287.043153] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<6> [287.043653] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4

<7> [287.043547] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [287.043900] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [287.044257] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [287.044706] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [287.045073] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [287.045323] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [287.045648] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [287.046015] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [287.046380] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [287.046763] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [287.047137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [287.047536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [287.047894] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [287.048145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [287.048390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [287.048768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [287.049136] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [287.049532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [287.049900] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [287.050267] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [287.050646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [287.050970] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [287.051224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [287.051469] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [287.051839] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [287.052208] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [287.052596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [287.052963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [287.053323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [287.053670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [287.053920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [287.054203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [287.054589] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [287.054960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [287.055327] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.055714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.056076] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.056362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.056692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [287.057057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [287.057427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [287.057812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [287.058177] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [287.058559] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [287.058913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [287.059233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [287.059483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [287.059755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [287.060112] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.060481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.060872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [287.061242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [287.061620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [287.061974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [287.062217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [287.062463] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [287.062845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [287.063211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [287.068617] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [287.071652] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [287.072037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [287.072400] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [287.072744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [287.072979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [287.073209] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [287.073612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [287.073971] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [287.074329] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [287.075636] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [287.076053] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [287.076776] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [287.077223] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [287.077529] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [287.087527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.087811] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [287.088074] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000000b

<7> [287.295719] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [287.296408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [287.298193] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.300660] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [287.301635] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [287.303175] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [287.303706] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [287.304190] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [287.306692] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [287.307309] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [287.307965] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [287.310373] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [287.311045] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [287.311729] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [287.316193] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [287.317163] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [287.319099] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [287.321571] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [287.322486] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [287.324262] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [287.329307] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 386 us, max time under evasion is 250 us

<7> [287.338854] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [287.345133] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [287.348805] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [287.352127] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [287.360904] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])

<7> [287.361882] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.361980] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [287.362014] i915 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [287.362368] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.362422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.363308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [287.373397] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [287.374169] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.375468] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.376809] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.378866] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.378913] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.378949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.379098] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.380733] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.382487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.388160] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [287.391817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.391877] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.391935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.391994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.392046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.399185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.399260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.399313] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.402573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.404353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.406273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.408209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.408258] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.409943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.416603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.416638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.417778] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.417818] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.417850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.423151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.423182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.423204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.424665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.425378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.427337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.428165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.428187] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.429059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.433472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.433493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.434265] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.434288] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] enabled? yes

<7> [287.434303] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:117:DP-1] enabled? no

<7> [287.434316] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:126:HDMI-A-1] enabled? no

<7> [287.434329] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:132:DP-2] enabled? no

<7> [287.434341] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:138:HDMI-A-2] enabled? no

<7> [287.434424] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [287.434472] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:109:eDP-1] found preferred mode: 3200x1800

<7> [287.434486] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [287.434577] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:57:pipe A] desired mode 3200x1800 set (0,0)

<7> [287.434919] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [287.436537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.436569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.437623] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.438194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.438768] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.440685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.440702] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.440713] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.440758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.441240] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.441812] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.444887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.444904] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.444919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.445077] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.445091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.449654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.449996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.450041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.451484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.452011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.453865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.454555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.454568] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.455044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.458663] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.458755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.459253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.459591] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.459604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.464124] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.464215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.464224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.464768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.465141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.465679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.466083] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.466093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.466443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.466780] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.467190] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.467573] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [287.467955] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.468340] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.468971] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [287.469350] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.469735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.469759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.469919] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.470125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.470296] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [287.477466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.477484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.482007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.482780] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.482793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.483471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.483846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [287.484391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.484817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.484828] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.485139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [287.488277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.488289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.488718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.489589] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.489600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.494037] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.495096] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.495109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.495854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.496214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.496836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.497236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.497246] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.497692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.501208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.501220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.501836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.502777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1]

<7> [287.502791] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:eDP-1]

<7> [287.503233] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [287.503620] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [287.503977] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [287.504482] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [287.504494] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD monitor

<7> [287.504520] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:109:eDP-1] ELD size 20, SAD count 0

<7> [287.504609] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] VRR capable: no

<7> [287.504968] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [287.505320] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:109:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [287.507053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:109:eDP-1] probed modes:

<7> [287.507066] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [287.507076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 298600 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [287.507138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1]

<7> [287.507148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [287.511777] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:117:DP-1] disconnected

<7> [287.511834] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1]

<7> [287.511845] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [287.512480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.512907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<6> [287.514092] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<7> [287.515835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [287.516255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.516267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.516688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<6> [287.517917] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<6> [287.521131] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<7> [287.522310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [287.522322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [287.522761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:126:HDMI-A-1] disconnected

<7> [287.522801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2]

<7> [287.522809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [287.527168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:132:DP-2] disconnected

<7> [287.527223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2]

<7> [287.527235] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [287.528050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.528443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [287.529133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [287.529599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.529611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [287.529967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [287.533263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [287.533275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [287.533836] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:138:HDMI-A-2] disconnected

<7> [287.534593] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:142]

<7> [288.582561] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:57:pipe A]

<7> [288.582762] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [288.583187] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [288.583591] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [288.583986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [288.584366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [288.584764] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [288.585145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [288.585569] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.585995] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [288.586420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.586858] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.587286] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.587725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.588153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.588593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.589020] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.589452] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.589837] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.590215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.590606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [288.590989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [288.591369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [288.591759] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [288.592137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [288.592526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [288.592838] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [288.593085] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [288.593465] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [288.593879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [288.594236] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [288.594641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [288.595019] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [288.595398] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [288.595806] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [288.596186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [288.596568] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [288.596880] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [288.597246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [288.597623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [288.597909] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [288.598158] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [288.598453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [288.598834] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [288.599211] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [288.599596] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [288.599971] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.600340] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.600724] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [288.601194] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [288.601631] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 23329 kHz -> 0 kHz

<7> [288.601993] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [288.602231] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [288.602493] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [288.602880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [288.603250] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [288.603628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [288.603988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [288.604592] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [288.606091] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [288.740620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [288.815945] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [288.817900] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [288.823932] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [288.824972] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [288.825980] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [288.828437] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [288.829815] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [288.881151] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [288.882132] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [288.883022] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [288.883356] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [288.885144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [288.889137] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [288.889216] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [288.891024] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [288.891631] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [288.892163] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [288.894864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [288.896364] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [288.897892] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [288.899427] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [288.900915] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [288.902253] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [288.903198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [288.904328] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [288.905854] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [288.907244] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [288.909836] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [288.913042] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:82:pipe B]

<7> [288.914664] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:107:pipe C]

<7> [289.016176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [289.017937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [289.019501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [289.021453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [289.024457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [289.043943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [289.132235] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:109:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [289.133225] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:108:DDI A/PHY A][CRTC:57:pipe A] DP link limits: pixel clock 373250 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 min link_bpp 18.0000 max link_bpp 24.0000

<7> [289.134083] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1119750 available 2160000

<7> [289.135381] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [289.136453] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:108:DDI A/PHY A] [CRTC:57:pipe A]

<7> [289.137347] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [289.139430] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [289.141012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [289.142558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [289.144072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4348677/8388608 link 362389/524288)

<7> [289.145355] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [289.146823] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [289.148281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.149440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3360)

<7> [289.150590] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.151580] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.152813] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.154146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.155659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.156735] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.158224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.159420] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.160551] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.161642] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.162752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [289.163927] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3360)

<7> [289.164990] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [289.165879] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3360)

<7> [289.166984] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [289.168010] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [289.169145] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [289.170548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [289.171910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [289.173268] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1808)

<7> [289.174623] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1852)

<7> [289.175954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1852)

<7> [289.177077] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [289.178429] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [289.179776] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [289.181137] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [289.182485] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [289.183859] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 373250)

<7> [289.184928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 373250)

<7> [289.186084] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [289.187424] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [289.188992] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [289.190319] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 856), size 0 -> 856

<7> [289.191670] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 0 - 0) -> ( 856 - 892), size 0 -> 36

<7> [289.192928] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [289.194037] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0

<7> [289.195137] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0

<7> [289.196006] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0

<7> [289.197462] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 0 kHz -> 373250 kHz

<7> [289.198636] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 23329 kHz

<7> [289.199693] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [289.200497] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [289.201367] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [289.202702] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:57:pipe A] allocated DPLL 0

<7> [289.203759] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:57:pipe A] reserving DPLL 0

<7> [289.204902] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: yes [modeset]

<7> [289.205806] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [289.206916] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [289.207829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [289.208954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [289.209832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [289.211023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [289.212228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4348677, data_n: 8388608, link_m: 362389, link_n: 524288, tu: 64

<7> [289.213366] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [289.214300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [289.215369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [289.216238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [289.217291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [289.218209] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [289.219303] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 2, length 8

<7> [289.220176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB

<7> [289.221373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB

<7> [289.222322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0

<7> [289.223275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range

<7> [289.224201] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined

<7> [289.225120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [289.226147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [289.227216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0

<7> [289.228099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0

<7> [289.229249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.230361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x48 0xa

<7> [289.231445] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.232337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 373250 3200 3248 3280 3360 1800 1803 1808 1852 0x40 0xa

<7> [289.233395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=373250, hd=3200 hb=3200-3360 hs=3248-3280 ht=3360, vd=1800 vb=1800-1852 vs=1803-1808 vt=1852, flags=0xa

<7> [289.234274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 373250, min cdclk 373250

<7> [289.235395] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 73, ips linetime: 0

<7> [289.236307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [289.237381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [289.238570] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [289.239672] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0

<7> [289.240483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [289.241396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [289.242390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [289.243270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.244342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.245249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [289.245960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [289.246657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [289.247281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:110] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [289.247918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [289.248539] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [289.249190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [289.249805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [289.262645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [289.272894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [289.273184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [289.273785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [289.274462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [289.275168] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 450000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 1

<7> [289.276073] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [289.276362] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [289.276676] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [289.277045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [289.277465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [289.277910] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [289.278335] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [289.278809] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [289.279212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [289.279716] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:57:pipe A]

<7> [289.280123] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [289.280853] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power on

<7> [289.281392] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (103 ms remaining)

<7> [289.392001] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [289.401663] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.402149] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power on

<7> [289.402721] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000003

<7> [289.452143] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [289.453124] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [289.454013] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [289.454996] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [289.603859] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [289.605144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [289.607832] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.609958] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turning VDD on

<7> [289.611179] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b

<7> [289.616976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 84 40 00 00 01 01 02 00 00 00 00 0b 00

<7> [289.618211] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [289.620837] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [289.621810] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [289.622793] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [289.626464] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Clock recovery OK

<7> [289.627985] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] >=5.4/6.48 Gbps link rate without sink TPS3 support

<7> [289.629447] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Using DP training pattern TPS2

<7> [289.633864] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 2/2/2/2, pre-emphasis request: 1/1/1/1

<7> [289.635402] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 2(max)/2(max)/2(max)/2(max), pre-emphasis levels: 1/1/1/1

<7> [289.636980] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 08000000

<7> [289.641157] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [289.642603] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:109:eDP-1][ENCODER:108:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [289.645209] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [289.648601] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [289.650087] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [289.652198] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 37

<7> [289.656970] i915 0000:00:02.0: [drm:intel_pipe_update_end [i915]] Atomic update on pipe (A) took 336 us, max time under evasion is 250 us

<7> [289.664444] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR1

<7> [289.671359] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [289.673483] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [289.679701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:117:DP-1]

<7> [289.681339] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [289.687582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:126:HDMI-A-1]

<7> [289.689629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.691044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [289.693617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [289.695181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.695220] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.697271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [289.704333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [289.704379] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [289.706488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:132:DP-2]

<7> [289.712459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:138:HDMI-A-2]

<7> [289.714930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.716356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [289.718417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [289.719997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.720036] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [289.722209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [289.729066] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [289.729113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [289.833092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.833955] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.846698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.872099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.872471] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.885677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [289.938290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [289.939226] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [289.946827] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.947205] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.947825] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B

<7> [289.948285] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.949108] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.949607] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C

<7> [289.950068] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.950416] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.950728] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [289.951890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [290.045102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [290.047352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [290.048783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [290.050162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<6> [290.058265] Console: switching to colour dummy device 80x25

<7> [290.060591] i915 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:110] is removed

<7> [290.060930] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 856) -> ( 0 - 0), size 856 -> 0

<7> [290.062327] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [290.063641] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 3, 4, 4, 7, 9, 10, 11, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.065452] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 7, 58, 84, 96, 184, 227, 245, 288, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.066884] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 8, 59, 85, 97, 185, 228, 246, 289, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [290.069025] i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1

<7> [290.081473] i915 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [290.089153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [290.090356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [290.091659] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [290.092882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [290.094053] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4348677/8388608 link 362389/524288, found tu 0, data 0/0 link 0/0)

<7> [290.095215] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [290.096446] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [290.097510] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.098414] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3360, found 0)

<7> [290.099874] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.101035] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.102127] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.103042] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.104207] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.105124] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.106186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.107091] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.108183] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.109352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.110448] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [290.111356] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3360, found 0)

<7> [290.112416] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [290.113293] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3360, found 0)

<7> [290.114368] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [290.115255] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [290.116310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [290.117345] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [290.118663] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [290.119655] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1808, found 0)

<7> [290.120797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1852, found 0)

<7> [290.121677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1852, found 0)

<7> [290.122753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [290.123630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [290.124708] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [290.125641] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [290.126877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [290.127885] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 373250, found 0)

<7> [290.129228] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 373250, found 0)

<7> [290.130576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:57:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [290.131929] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:57:pipe A] fastset requirement not met, forcing full modeset

<7> [290.133291] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:57:pipe A] releasing DPLL 0

<7> [290.134639] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:57:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [290.135295] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:51:cursor A] ddb ( 856 - 892) -> ( 0 - 0), size 36 -> 0

<7> [290.136053] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:57:pipe A] min cdclk: 373250 kHz -> 0 kHz

<7> [290.136959] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [290.137854] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [290.138725] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [290.139619] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:57:pipe A] enable: no [modeset]

<7> [290.140418] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [290.141038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:42:plane 2A] fb: [NOFB], visible: no

<7> [290.141891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:51:cursor A] fb: [NOFB], visible: no

<7> [290.144421] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [290.351754] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:109:eDP-1] set backlight PWM = 0

<7> [290.353959] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [290.367234] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 turn panel power off

<7> [290.367672] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11001010, pins 0x00000010, long 0x00000000

<7> [290.368418] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [290.368750] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - short

<7> [290.369686] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000000

<7> [290.421190] i915 0000:00:02.0: [drm:spt_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12001010, pins 0x00000010, long 0x00000010

<7> [290.422192] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:108:DDI A/PHY A] - long

<7> [290.422290] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [290.423211] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [290.424757] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [290.424738] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:57:pipe A]

<7> [290.426859] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [290.427265] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:108:DDI A/PHY A]

<7> [290.428492] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [290.433812] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:108:DDI A/PHY A]

<7> [290.435155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:116:DDI B/PHY B]

<7> [290.436298] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DP-MST A]

<7> [290.437770] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:119:DP-MST B]

<7> [290.439102] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:120:DP-MST C]

<7> [290.440876] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:131:DDI C/PHY C]

<7> [290.442455] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:133:DP-MST A]

<7> [290.443945] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:134:DP-MST B]

<7> [290.445468] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:135:DP-MST C]

<7> [290.447128] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:109:eDP-1]

<7> [290.450165] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:57:pipe A]

<7> [290.516256] i915 0000:00:02.0: [drm:intel_gt_set_wedged [i915]] called from intel_gt_set_wedged_on_fini+0x12/0x50 [i915]

<7> [290.569222] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:109:eDP-1] removing connector from sysfs

<7> [290.582584] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:117:DP-1] removing connector from sysfs

<7> [290.585564] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:126:HDMI-A-1] removing connector from sysfs

<7> [290.598421] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:132:DP-2] removing connector from sysfs

<7> [290.602426] i915 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:138:HDMI-A-2] removing connector from sysfs

<7> [290.633562] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 wait for panel power cycle (290 ms remaining)

<7> [290.928192] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:108:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000000

<7> [291.006979] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<6> [291.618494] [IGT] i915_pm_rpm: finished subtest module-reload, SUCCESS

<6> [291.619649] [IGT] i915_pm_rpm: exiting, ret=0

Results for igt@i915_pm_rpm@module-reload