igt@i915_pm_rpm@system-suspend-execbuf on shard-rkl@CI_DRM

Detail	Value
Duration	unknown
Hostname	shard-rkl-1
Igt-Version	IGT-Version: 2.3-gf38f4d8e9 (x86_64) (Linux: 6.19.0-rc1-CI_DRM_17718-g3b5cb684dfb4+ x86_64)
Out	Using IGT_SRANDOM=1766439305 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff8881202d9818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x60/0x130 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x280/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x740 [i915] intel_atomic_commit_tail+0x1240/0x1c50 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: system-suspend-execbuf [cmd] rtcwake: assuming RTC uses UTC ... [cmd] rtcwake: wakeup from "mem" using /dev/rtc0 at Mon Dec 22 21:35:23 2025 Subtest system-suspend-execbuf: SUCCESS (19.607s) This test caused an abort condition: Ping host did not respond to ping, network down
Err	Starting subtest: system-suspend-execbuf Subtest system-suspend-execbuf: SUCCESS (19.607s)
Dmesg	<6> [219.755652] Console: switching to colour dummy device 80x25 <6> [219.755782] [IGT] i915_pm_rpm: executing <7> [219.759152] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [219.759610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [219.759617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [219.763848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [219.763895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] <7> [219.763903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [219.789622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [219.789626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [219.789628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [219.789630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [219.789632] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [219.789634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [219.789636] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [219.789639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [219.789641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [219.789850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.789972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [219.790273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.790399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.790903] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.790909] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.790913] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE) <7> [219.790917] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.790921] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.790925] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.790928] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.790935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes: <7> [219.790938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [219.790941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.790950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.790958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.790961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.790969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.790974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.790977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.790980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.790983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5 <7> [219.790985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5 <7> [219.790988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5 <7> [219.790991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [219.790994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.790996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.790999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.791002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.791004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [219.791007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.791010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.791013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [219.791015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [219.791018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [219.791021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [219.791024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [219.791027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [219.791029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [219.791032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [219.791035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [219.791038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [219.791041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [219.791043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [219.791046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 <7> [219.791049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [219.791052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [219.791055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [219.791057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [219.791060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [219.791063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [219.791065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [219.791068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 <7> [219.791071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 <7> [219.791074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 <7> [219.791076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [219.791079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [219.791082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa <7> [219.791085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [219.791087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [219.791090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [219.791093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [219.791153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [219.791157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [219.795370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [219.795413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [219.795416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [219.799593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [219.803223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [219.803228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [219.807420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [219.807801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [219.807804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [219.812008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [219.812253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [219.812256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [219.816435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [219.816723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] <7> [219.816726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [219.820909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected <7> [219.820923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] <7> [219.820927] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [219.846682] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [219.846686] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [219.846688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [219.846690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [219.846692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [219.846694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [219.846696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [219.846699] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [219.846701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [219.846897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.847017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [219.847317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [219.847476] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.847963] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.847969] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.847973] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE) <7> [219.847977] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.847981] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.847985] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [219.847989] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE) <7> [219.847995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes: <7> [219.847998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [219.848001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.848009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.848017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.848020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.848028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [219.848034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [219.848036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.848039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [219.848042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5 <7> [219.848045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5 <7> [219.848047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5 <7> [219.848050] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [219.848053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [219.848067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [219.848072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5 <7> [219.848075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [219.848078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [219.848081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [219.848083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5 <7> [219.848086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 <7> [219.848089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 <7> [219.848092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [219.848095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [219.848097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [219.848100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [219.848103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [219.848106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5 <7> [219.848109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [219.848111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [219.848114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [219.848117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [219.848120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [219.848122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 <7> [219.848125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 <7> [219.848128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5 <7> [219.848131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 <7> [219.848133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 <7> [219.848136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [219.848139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [219.848142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa <7> [219.848144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa <7> [219.848147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa <7> [219.848150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [219.848152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [219.848176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] <7> [219.848179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [219.852373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected <7> [219.852385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] <7> [219.852387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [219.856596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected <7> [219.856883] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:415] <7> [220.871172] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A] <7> [220.871450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [220.872057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [220.872662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [220.873219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [220.873812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [220.874385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [220.874934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [220.875493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0) <7> [220.875964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [220.876093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0) <7> [220.876224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [220.876353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0) <7> [220.876495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [220.876624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [220.876753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [220.876884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [220.877015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [220.877144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [220.877274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [220.877418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0) <7> [220.877548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [220.877677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0) <7> [220.877805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [220.877936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0) <7> [220.878066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [220.878196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [220.878325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [220.878464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [220.878592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [220.878721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [220.878854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [220.878989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [220.879121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [220.879250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [220.879385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [220.879514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0) <7> [220.879644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0) <7> [220.879773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0) <7> [220.879903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 222750, found 0) <7> [220.880033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000) <7> [220.880162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000) <7> [220.880292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in avi infoframe <7> [220.880426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [220.880556] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [220.880558] i915 0000:00:02.0: colorspace: RGB <7> [220.880559] i915 0000:00:02.0: scan mode: Underscan <7> [220.880561] i915 0000:00:02.0: colorimetry: No Data <7> [220.880562] i915 0000:00:02.0: picture aspect: 16:9 <7> [220.880563] i915 0000:00:02.0: active aspect: Same as Picture <7> [220.880564] i915 0000:00:02.0: itc: No Data <7> [220.880565] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [220.880567] i915 0000:00:02.0: quantization range: Default <7> [220.880568] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [220.880569] i915 0000:00:02.0: video code: 16 <7> [220.880571] i915 0000:00:02.0: ycc quantization range: Full <7> [220.880572] i915 0000:00:02.0: hdmi content type: Graphics <7> [220.880573] i915 0000:00:02.0: pixel repeat: 0 <7> [220.880574] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [220.880576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [220.880703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in spd infoframe <7> [220.880833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [220.880961] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [220.880962] i915 0000:00:02.0: vendor: Intel <7> [220.880964] i915 0000:00:02.0: product: Integrated gfx <7> [220.880965] i915 0000:00:02.0: source device information: PC General (0x9) <7> [220.880966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [220.881095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hdmi infoframe <7> [220.881222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [220.881349] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [220.881350] i915 0000:00:02.0: empty frame <7> [220.881351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [220.881490] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [220.881619] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7> [220.881772] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [220.881902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [220.882052] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0 <7> [220.882180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0 <7> [220.882306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [220.882439] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.882567] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.882692] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [220.882834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [220.882968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [220.883115] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 192000 kHz -> 0 kHz <7> [220.883263] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [220.883420] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [220.883552] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz <7> [220.883683] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [220.883816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset] <7> [220.883949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [220.884084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [220.884215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [220.884344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [220.884493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [220.884623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [220.884806] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:398:HDMI-A-2][ENCODER:397:DDI TC1/PHY C] Disable audio codec on [CRTC:149:pipe A] <7> [220.903094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7> [220.919657] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [220.927837] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [220.933004] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [220.933039] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [220.936485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [220.937028] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [220.937602] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [220.938093] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [220.938604] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [220.939275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [220.939824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [220.940097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [220.940227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [220.940355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [220.940496] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [220.940625] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [220.940819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [220.940998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [220.941158] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [220.941554] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B] <7> [220.941675] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C] <7> [221.046627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.047256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.047897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.049639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.050303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.056260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.057739] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [221.058615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [221.059427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [221.060022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [221.060825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [221.144054] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf <7> [221.145235] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A] <7> [221.157538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.157878] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [221.158448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [221.159013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [221.159671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [221.160332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [221.161029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [221.161647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [221.162281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [221.162976] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [221.163558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [221.164229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [221.166245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.166792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.177020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.177204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.177536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.178388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.179853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [221.180064] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B] <7> [221.184218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [221.184949] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C] <7> [221.201418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.201797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.201966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.210012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [221.210017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [221.210019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [221.210021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [221.210023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [221.210025] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [221.210028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [221.210030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [221.210033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [221.210234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [221.210366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [221.210681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [221.210808] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [221.210894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.211883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.213306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [221.217493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [221.230473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.230706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.230843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.232146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.232293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.235819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.237169] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [221.237476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [221.237759] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [221.237922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [221.238089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [221.400249] PM: suspend entry (s2idle) <6> [221.405867] Filesystems sync: 0.004 seconds <6> [221.415800] Freezing user space processes <6> [221.419616] Freezing user space processes completed (elapsed 0.003 seconds) <6> [221.419680] OOM killer disabled. <6> [221.419685] Freezing remaining freezable tasks <6> [221.421200] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) <7> [231.102498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [231.190087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [231.190253] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [231.190394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [231.190569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [231.190793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [231.191008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [231.191209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [231.191406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [231.191593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [231.191946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [231.192087] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [231.192483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [231.193192] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [231.193329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [231.200770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [231.200908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [231.205655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [231.233592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [231.233597] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [231.233599] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [231.233601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [231.233603] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [231.233605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [231.233608] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [231.233612] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [231.233615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [231.233836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [231.233961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [231.234271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [231.234395] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [231.234418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [231.238717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [231.243832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [231.248473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [231.275560] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [231.275563] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [231.275565] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [231.275567] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [231.275569] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [231.275572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [231.275574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [231.275576] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [231.275579] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [231.275777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [231.275897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [231.276208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [231.276332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [231.276353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [231.281524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [231.286403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [233.902316] GFP mask restricted <6> [233.910692] e1000e: EEE TX LPI TIMER: 00000000 <6> [233.910870] e1000e: EEE TX LPI TIMER: 00000011 <7> [233.941266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [233.941442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [233.942242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [233.943631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [233.944044] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [233.948624] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [233.948655] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [233.956063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [233.956228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [233.956373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [233.956509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [233.957780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [233.959074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [233.959224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [233.960010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [233.961392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [233.961582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [233.961802] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0 <7> [233.963531] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <3> [233.984338] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [234.334628] PM: suspend of devices complete after 432.312 msecs <7> [234.334632] PM: start suspend of devices complete after 535.371 msecs <7> [234.356196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [234.356595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [234.356873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [234.357190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [234.357470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [234.358868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [234.360137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [234.361515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [234.361989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [234.362267] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [234.362419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [234.362712] PM: late suspend of devices complete after 28.078 msecs <6> [234.373199] ACPI: EC: interrupt blocked <7> [234.389703] PM: Triggering wakeup from IRQ 9 <7> [234.630304] PM: noirq suspend of devices complete after 266.717 msecs <6> [234.630344] ACPI: \_SB_.PR00: LPI: Device not power manageable <6> [234.630355] ACPI: \_SB_.PR01: LPI: Device not power manageable <6> [234.630361] ACPI: \_SB_.PR02: LPI: Device not power manageable <6> [234.630367] ACPI: \_SB_.PR03: LPI: Device not power manageable <6> [234.630372] ACPI: \_SB_.PR04: LPI: Device not power manageable <6> [234.630377] ACPI: \_SB_.PR05: LPI: Device not power manageable <6> [234.630383] ACPI: \_SB_.PR06: LPI: Device not power manageable <6> [234.630388] ACPI: \_SB_.PR07: LPI: Device not power manageable <6> [234.630393] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable <6> [234.630403] ACPI: \_SB_.PR08: LPI: Device not power manageable <6> [234.630409] ACPI: \_SB_.PR09: LPI: Device not power manageable <6> [234.630414] ACPI: \_SB_.PR10: LPI: Device not power manageable <6> [234.630419] ACPI: \_SB_.PR11: LPI: Device not power manageable <6> [234.630425] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable <6> [234.630431] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable <6> [234.633566] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off <6> [234.767840] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry <7> [234.767848] PM: suspend-to-idle <7> [234.768758] ACPI: EC: ACPI EC GPE status set <7> [234.768794] ACPI: PM: Rearming ACPI SCI for wakeup <7> [236.929923] Timekeeping suspended for 2.144 seconds <7> [236.930853] PM: Triggering wakeup from IRQ 9 <7> [236.931098] ACPI: PM: ACPI fixed event wakeup <7> [236.931106] PM: resume from suspend-to-idle <6> [237.074981] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit <6> [237.077937] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on <6> [237.078693] ACPI: EC: interrupt unblocked <7> [237.438963] PM: noirq resume of devices complete after 361.030 msecs <7> [237.446904] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08 <7> [237.447636] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [237.448234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [237.448927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [237.449645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [237.450318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [237.451017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [237.451298] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [237.451591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [237.452035] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [237.452173] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [237.452516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [237.453202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [237.453336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [237.453477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [237.453772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [237.453922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [237.454186] PM: early resume of devices complete after 8.566 msecs <7> [237.459467] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [237.459760] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7> [237.460337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: disabled <7> [237.460674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7> [237.460987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7> [237.461183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [237.461381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [237.461589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [237.461784] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [237.461976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [237.462169] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [237.462362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7> [237.462531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7> [237.462676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7> [237.462818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7> [237.462961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7> [237.463104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7> [237.463247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7> [237.463391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7> [237.463566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7> [237.463718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7> [237.463864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7> [237.464011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7> [237.464158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:387:DDI B/PHY B] hw state readout: disabled, pipe A <7> [237.464301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:397:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [237.464443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:401:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [237.464589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A <7> [237.464718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B <7> [237.464846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C <7> [237.464991] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [237.465140] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [237.465295] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [237.465552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:388:HDMI-A-1] hw state readout: disabled <7> [237.465719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:398:HDMI-A-2] hw state readout: disabled <7> [237.465876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:402:DP-1] hw state readout: disabled <7> [237.466029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:410:HDMI-A-3] hw state readout: disabled <7> [237.466159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [237.466289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [237.466418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [237.466555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [237.466682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [237.466810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [237.466939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [237.467073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7> [237.467203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7> [237.467333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7> [237.467462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7> [237.467607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7> [237.467735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7> [237.467863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7> [237.467992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7> [237.468211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7> [237.468431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7> [237.468605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7> [237.468756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7> [237.468971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7> [237.469124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7> [237.469276] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [237.469524] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [237.469667] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [237.469910] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0 <7> [237.470067] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7> [237.470248] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7> [237.470515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [237.470742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7> [237.470891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7> [237.471273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [237.471442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [237.471616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [237.471752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [237.471883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [237.472020] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [237.472156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state <7> [237.472288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [237.472417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <6> [237.472522] nvme nvme0: 12/0/0 default/read/poll queues <7> [237.472583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [237.472711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [237.472861] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [237.472989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:385:pipe C] fastset requirement not met in dpll_hw_state <7> [237.473117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [237.473246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [237.473376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [237.473515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [237.473649] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset <7> [237.473825] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [237.473962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset] <7> [237.474094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [237.474224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [237.474353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [237.474488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [237.474617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [237.474746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [237.474874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [modeset] <7> [237.475002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:151:plane 1B] fb: [NOFB], visible: no <7> [237.475131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [237.475259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [237.475387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [237.475523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [237.475650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [237.475779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [modeset] <7> [237.475907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:269:plane 1C] fb: [NOFB], visible: no <7> [237.476034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:299:plane 2C] fb: [NOFB], visible: no <7> [237.476161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:329:plane 3C] fb: [NOFB], visible: no <7> [237.476287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:359:plane 4C] fb: [NOFB], visible: no <7> [237.476415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:369:plane 5C] fb: [NOFB], visible: no <7> [237.476550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:379:cursor C] fb: [NOFB], visible: no <7> [237.476754] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [237.476888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [237.477020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [237.477150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [237.477280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [237.477410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [237.477552] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:388:HDMI-A-1] <7> [237.477711] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [237.477866] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:402:DP-1] <7> [237.478018] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:410:HDMI-A-3] <7> [237.478217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [237.478462] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7> [237.478705] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7> [237.479681] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <7> [237.479822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [237.484019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [237.487015] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0 <7> [237.487401] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <6> [237.489673] serial 00:02: activated <7> [237.492173] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [237.492275] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <3> [237.499098] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register <7> [237.509865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [237.509870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [237.509873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [237.509875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [237.509877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [237.509879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [237.509882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [237.509884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [237.509887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [237.510082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [237.510205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [237.510523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [237.510661] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [237.510683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [237.514881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [237.567639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [237.567807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [237.567953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [237.568092] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [237.568223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [237.569486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <3> [237.718709] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0 <6> [237.765577] ata3: SATA link down (SStatus 4 SControl 300) <6> [237.765628] ata4: SATA link down (SStatus 4 SControl 300) <6> [237.765722] ata2: SATA link down (SStatus 4 SControl 300) <3> [238.094780] atkbd serio0: Failed to enable keyboard on isa0060/serio0 <7> [238.131029] PM: resume of devices complete after 676.857 msecs <7> [238.131860] GFP mask restored <6> [238.135632] OOM killer enabled. <6> [238.135636] Restarting tasks: Starting <7> [238.136598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [238.136717] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [238.137729] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <6> [238.139140] Restarting tasks: Done <6> [238.139192] efivarfs: resyncing variable state <7> [238.141233] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [238.142218] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) <7> [238.142685] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [238.143372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [238.143789] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [238.144047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [238.144345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [238.146068] efivarfs: finished resyncing variable state <5> [238.146106] random: crng reseeded on system resumption <6> [238.146250] PM: suspend exit <7> [238.259662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [238.260038] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [238.260689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [238.261319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [238.262018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.262696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.263329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.264005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.264626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [238.265268] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [238.265876] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [238.266592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [238.268614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [238.269150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [238.278168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [238.278402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [238.278795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [238.283652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [238.316862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [238.316868] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [238.316870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [238.316872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [238.316874] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [238.316876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [238.316879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [238.316882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [238.316884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [238.317087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.317213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [238.317522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.317649] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [238.317670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [238.322878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [238.422772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [238.423405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [238.429310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [238.430771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [238.431428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [238.432215] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [238.432796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [238.433402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [238.497643] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [238.498019] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [238.498667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [238.499284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [238.499977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.500685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.501395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.502132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.502772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [238.503419] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [238.504022] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [238.504737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [238.506767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [238.507317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [238.516406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [238.516718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [238.517092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [238.521854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [238.552709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [238.552714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [238.552716] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [238.552718] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [238.552720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [238.552722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [238.552725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [238.552727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [238.552730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [238.552937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.553059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [238.553355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.553788] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [238.553809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [238.558695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [238.662751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [238.663371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [238.669302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [238.670652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [238.670910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [238.671188] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [238.671323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [238.671499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [238.734636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [238.735008] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [238.735651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [238.736261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [238.736950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.737628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.738326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.739056] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.739688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [238.740333] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [238.740971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [238.741753] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [238.743916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [238.744483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [238.754759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [238.754969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [238.755275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [238.759946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [238.790685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [238.790690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [238.790692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [238.790694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [238.790696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [238.790698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [238.790701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [238.790704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [238.790707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [238.790904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.791028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [238.791332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [238.791477] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [238.791498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [238.796703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [238.894631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [238.895325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [238.901229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [238.902699] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [238.903368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [238.904172] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [238.904761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [238.905382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [238.968633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [238.969007] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [238.969641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [238.970260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [238.970956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.971640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.972286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.972964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [238.973592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [238.974242] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [238.974835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [238.975560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [238.977584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [238.978137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [238.987225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [238.987479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [238.987830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [238.992546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [239.025484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [239.025489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [239.025491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [239.025493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [239.025495] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [239.025498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [239.025501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [239.025503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [239.025506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [239.025983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.026106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.026410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.027119] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.027140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [239.031976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [239.094793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [239.095413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [239.102522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [239.103986] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [239.104606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [239.105248] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [239.105749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [239.106310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [239.201623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [239.202000] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [239.202640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [239.203251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [239.203938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.204612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.205296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.206048] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.206683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [239.207322] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [239.207916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [239.208376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [239.209060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [239.209193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [239.215367] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [239.215565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [239.215781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [239.220338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [239.251069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [239.251073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [239.251075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [239.251077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [239.251079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [239.251081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [239.251084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [239.251087] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [239.251089] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [239.251294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.251414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.252431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.252560] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.252581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [239.257088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [239.326643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [239.327266] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [239.333144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [239.334568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [239.334810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [239.335088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [239.335223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [239.335395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [239.429874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [239.430248] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [239.430902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [239.431534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [239.432192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.432892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.433553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.434196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.434840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [239.435575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [239.436181] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [239.437025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [239.439089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [239.439680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [239.448751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [239.449011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [239.449390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [239.454162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [239.486278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [239.486283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [239.486285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [239.486287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [239.486289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [239.486291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [239.486294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [239.486296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [239.486299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [239.487251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.487375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.487694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.487821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.487842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [239.492142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [239.558684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [239.559370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [239.565346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [239.566786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [239.567500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [239.568229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [239.568808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [239.569426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [239.663636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [239.664013] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [239.664663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [239.665282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [239.665991] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.666687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.667334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.668016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.668654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [239.669297] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [239.669938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [239.670726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [239.672873] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [239.673505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [239.683785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [239.683971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [239.684241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [239.688870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [239.721034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [239.721039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [239.721041] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [239.721043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [239.721045] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [239.721047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [239.721050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [239.721052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [239.721055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [239.721257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.721377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.722376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.722512] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.722533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [239.727053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [239.790648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [239.791328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [239.794897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [239.796243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [239.796515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [239.796793] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [239.796928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [239.797097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [239.897609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [239.897985] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [239.898626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [239.899237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [239.899931] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.900609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.901246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.901969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [239.902682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [239.903326] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [239.904001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [239.904875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [239.905560] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [239.905696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [239.913063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [239.913255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [239.913552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [239.918166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [239.950349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [239.950353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [239.950355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [239.950357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [239.950359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [239.950361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [239.950364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [239.950367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [239.950369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [239.951242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.951365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [239.951683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [239.951811] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [239.951832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [239.956134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [240.022673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [240.023293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [240.025128] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [240.025143] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [240.025149] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [240.025156] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [240.029203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [240.030641] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [240.031284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [240.032041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [240.032640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [240.033234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [240.126598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [240.126972] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [240.127608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [240.128215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [240.128937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.129652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.130350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.131102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <6> [240.131753] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [240.131766] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [240.131772] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [240.131779] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [240.131805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [240.132460] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [240.133031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [240.133847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [240.135908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [240.136553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [240.146885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [240.147106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [240.147447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [240.152123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [240.184411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [240.184417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [240.184419] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [240.185481] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [240.185483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [240.185485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [240.185514] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [240.185516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [240.185519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [240.185714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.185839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [240.186141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.186270] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [240.186291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [240.191632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [240.254643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [240.255320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [240.258885] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [240.260214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [240.260487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [240.260765] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [240.260901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [240.261070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [240.361636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [240.362013] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [240.362684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [240.363311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [240.364046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.364773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.365520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.366154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.366802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [240.367496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [240.368045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [240.368809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [240.370942] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [240.371505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [240.381720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [240.381936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [240.382196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [240.386842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [240.418755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [240.418760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [240.418762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [240.418764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [240.418766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [240.418768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [240.418771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [240.418774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [240.418776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [240.418975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.419100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [240.419436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.419563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [240.419585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [240.424742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [240.526749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [240.527526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [240.533403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [240.534829] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [240.535561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [240.536296] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [240.536927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [240.537508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [240.599585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [240.599960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [240.600594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [240.601214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [240.601904] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.602582] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.603294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.604014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.604655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [240.605296] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [240.605962] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [240.606761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [240.607526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [240.607659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [240.615032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [240.615174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [240.615372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [240.619982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [240.651066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [240.651071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [240.651073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [240.651075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [240.651077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [240.651079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [240.651082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [240.651085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [240.651088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [240.651295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.651431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [240.652253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.652378] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [240.652405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [240.656878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [240.758637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [240.759320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [240.765286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [240.766672] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [240.766901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [240.767179] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [240.767314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [240.767523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [240.829545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [240.829918] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [240.830553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [240.831169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [240.831861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.832576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.833282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.833990] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [240.834683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [240.835410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [240.835968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [240.836695] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [240.838719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [240.839271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [240.848398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [240.848707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [240.849032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [240.853701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [240.885885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [240.885890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [240.885892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [240.885894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [240.885896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [240.885898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [240.885901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [240.885904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [240.885907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [240.886114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.886237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [240.886544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [240.886672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [240.886693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [240.891884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [240.958708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [240.959330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [240.965262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [240.966704] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [240.967348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [240.968110] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [240.968709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [240.969302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [241.062575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [241.062949] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [241.063585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [241.064197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [241.064887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.065564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.066212] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.066889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.067571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [241.068274] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [241.068909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [241.069628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [241.071655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [241.072209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [241.081336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [241.081639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [241.082000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [241.086706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [241.118700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [241.118706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [241.118708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [241.118710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [241.118712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [241.118714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [241.118717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [241.118719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [241.118722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [241.118931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.119056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [241.119374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.119501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [241.119521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [241.124701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [241.190585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [241.191263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [241.192744] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [241.192761] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [241.192768] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [241.192775] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [241.197204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [241.198579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [241.198810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [241.199090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [241.199226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [241.199408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [241.295579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [241.295952] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [241.296590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [241.297205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [241.297983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.298738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.299463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.300098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.300819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [241.301540] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [241.302113] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [241.302740] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [241.303421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [241.303553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [241.310948] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [241.311098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [241.311308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [241.315879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [241.347930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [241.347935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [241.347937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [241.347939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [241.347941] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [241.347943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [241.347946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [241.347948] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [241.347951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [241.348162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.348283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [241.349333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.349475] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [241.349496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [241.354123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [241.454917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [241.455661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [241.461479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [241.462946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [241.463661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [241.464415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [241.464966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [241.465594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [241.524559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [241.524929] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [241.525563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [241.526175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [241.526870] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.527602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.528313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.529014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.529715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [241.530426] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [241.530972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [241.531794] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [241.533865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [241.534499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [241.546070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [241.546411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [241.546786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [241.552680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [241.585247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [241.585253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [241.585255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [241.585257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [241.585259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [241.585261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [241.585264] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [241.585267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [241.585269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [241.585474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.585608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [241.585924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.586056] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [241.586079] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [241.590853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [241.654593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [241.655271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [241.661254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [241.662747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [241.663473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [241.664209] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [241.664830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [241.665454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [241.760559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [241.760934] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [241.761571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [241.762184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [241.762868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.763539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.764249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.765010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.765704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [241.766427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [241.767029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [241.767802] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [241.769933] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [241.770528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [241.780884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [241.781145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [241.781502] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [241.786103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [241.818030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [241.818035] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [241.818037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [241.818039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [241.818041] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [241.818043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [241.818046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [241.818049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [241.818051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [241.818256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.819125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [241.819428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [241.819555] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [241.819576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [241.824047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [241.894573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [241.895248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [241.901207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [241.902667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [241.903400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [241.904131] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [241.904731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [241.905339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [241.995580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [241.995955] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [241.996596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [241.997206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [241.997915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.998599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [241.999280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.000035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.000739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [242.001448] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.002008] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [242.002677] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [242.003361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [242.003495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [242.010893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [242.011043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [242.011258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [242.015806] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [242.048172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [242.048177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [242.048179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [242.048181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [242.048183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [242.048185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [242.048188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [242.048190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [242.048193] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [242.049122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.049247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [242.049561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.049686] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [242.049706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [242.054037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [242.118567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [242.119243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [242.125202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [242.126557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [242.126787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [242.127064] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [242.127201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [242.127387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [242.224543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [242.224917] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [242.225555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [242.226172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [242.226869] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.227634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.228358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.229062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.229778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [242.230502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.231097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [242.231875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [242.233898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [242.234467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [242.243518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [242.243780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [242.244138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [242.248882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [242.282062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [242.282067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [242.282069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [242.282071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [242.282074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [242.282076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [242.282079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [242.282081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [242.282084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [242.282291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.283175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [242.283518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.283643] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [242.283664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [242.288102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [242.390540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [242.391211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [242.397186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [242.398744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [242.399494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [242.400286] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [242.400903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [242.401640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [242.457541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [242.457914] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [242.458553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [242.459168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [242.459859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.460531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.461239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.461976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.462623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [242.463353] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.463946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [242.464679] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [242.466815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [242.467381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [242.476430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [242.476693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [242.477056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [242.481818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [242.515170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [242.515175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [242.515177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [242.515179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [242.515181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [242.515183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [242.515186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [242.515188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [242.515191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [242.516212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.516341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [242.516648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.516774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [242.516795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [242.521099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [242.622547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [242.623216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <6> [242.624174] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0 <4> [242.624191] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [242.624198] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000 <4> [242.624205] nvme 0000:01:00.0: [ 0] RxErr (First) <7> [242.629201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [242.630546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [242.630805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [242.631084] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [242.631220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [242.631402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [242.690532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [242.690908] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [242.691549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [242.692159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [242.692851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.693523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.694237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.694945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.695632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [242.696364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.696909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [242.697617] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [242.699783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [242.700348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [242.709406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [242.709704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [242.710004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [242.714651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [242.745917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [242.745922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [242.745924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [242.745926] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [242.745928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [242.745930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [242.745933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [242.745936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [242.745938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [242.746143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.746264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [242.746882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [242.747007] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [242.747030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [242.751609] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <7> [242.822548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [242.823224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [242.829230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [242.830764] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [242.831500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [242.832241] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [242.832880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [242.833600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [242.912693] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS <7> [242.916785] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [242.917373] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [242.917948] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:397:DDI TC1/PHY C] [CRTC:149:pipe A] <7> [242.918528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [242.919102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [242.919702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [242.920287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [242.920944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [242.921594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [242.922142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [242.922728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200) <7> [242.923306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [242.923968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200) <7> [242.924574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [242.924800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052) <7> [242.924929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [242.925059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [242.925188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [242.925318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [242.925458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [242.925587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [242.925716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [242.925843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200) <7> [242.925973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [242.926102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200) <7> [242.926231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [242.926370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052) <7> [242.926502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [242.926630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [242.926760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [242.926888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [242.927017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [242.927146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [242.927274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [242.927508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [242.927639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [242.927768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [242.927896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [242.928024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36) <7> [242.928153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500) <7> [242.928281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500) <7> [242.928427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 222750) <7> [242.928558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071) <7> [242.928687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006) <7> [242.928816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in avi infoframe <7> [242.928944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [242.929072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [242.929199] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [242.929201] i915 0000:00:02.0: colorspace: RGB <7> [242.929203] i915 0000:00:02.0: scan mode: Underscan <7> [242.929204] i915 0000:00:02.0: colorimetry: No Data <7> [242.929206] i915 0000:00:02.0: picture aspect: 16:9 <7> [242.929207] i915 0000:00:02.0: active aspect: Same as Picture <7> [242.929209] i915 0000:00:02.0: itc: No Data <7> [242.929210] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [242.929212] i915 0000:00:02.0: quantization range: Default <7> [242.929213] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [242.929215] i915 0000:00:02.0: video code: 16 <7> [242.929216] i915 0000:00:02.0: ycc quantization range: Full <7> [242.929217] i915 0000:00:02.0: hdmi content type: Graphics <7> [242.929219] i915 0000:00:02.0: pixel repeat: 0 <7> [242.929220] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [242.929222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in spd infoframe <7> [242.929365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [242.929494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [242.929621] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [242.929623] i915 0000:00:02.0: vendor: Intel <7> [242.929624] i915 0000:00:02.0: product: Integrated gfx <7> [242.929626] i915 0000:00:02.0: source device information: PC General (0x9) <7> [242.929627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hdmi infoframe <7> [242.929755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7> [242.929882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7> [242.930010] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [242.930012] i915 0000:00:02.0: empty frame <7> [242.930014] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [242.930179] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [242.930310] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [242.930453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012 <7> [242.930579] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36 <7> [242.930704] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [242.930833] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 <7> [242.930966] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 <7> [242.931094] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 <7> [242.931238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 594000 num active planes 1 <7> [242.931383] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 594 <7> [242.931514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [242.931658] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 192000 kHz <7> [242.931803] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [242.931933] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [242.932062] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [242.932190] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [242.932320] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7> [242.932468] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7> [242.932606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7> [242.932741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [242.932875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [242.933007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [242.933140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [242.933272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [242.933413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [242.933542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [242.933670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x6 <7> [242.933799] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [242.933800] i915 0000:00:02.0: colorspace: RGB <7> [242.933802] i915 0000:00:02.0: scan mode: Underscan <7> [242.933803] i915 0000:00:02.0: colorimetry: No Data <7> [242.933804] i915 0000:00:02.0: picture aspect: 16:9 <7> [242.933806] i915 0000:00:02.0: active aspect: Same as Picture <7> [242.933807] i915 0000:00:02.0: itc: No Data <7> [242.933809] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [242.933810] i915 0000:00:02.0: quantization range: Default <7> [242.933811] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [242.933813] i915 0000:00:02.0: video code: 16 <7> [242.933814] i915 0000:00:02.0: ycc quantization range: Full <7> [242.933815] i915 0000:00:02.0: hdmi content type: Graphics <7> [242.933817] i915 0000:00:02.0: pixel repeat: 0 <7> [242.933818] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [242.933820] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [242.933821] i915 0000:00:02.0: vendor: Intel <7> [242.933823] i915 0000:00:02.0: product: Integrated gfx <7> [242.933824] i915 0000:00:02.0: source device information: PC General (0x9) <7> [242.933826] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [242.933827] i915 0000:00:02.0: empty frame <7> [242.933829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [242.933958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [242.934086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 07 00 00 00 <7> [242.934214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [242.934351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [242.934482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [242.934610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [242.934740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [242.934868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [242.934997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [242.935126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [242.935254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [242.935390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [242.935518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0 <7> [242.935645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [242.935774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [242.935904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [242.936034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [242.936165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [242.936295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [242.936438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [242.936567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.936697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.936829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.936962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [242.937092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [242.937223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.937361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.937491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [242.937620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [242.937749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [242.937877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:414] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [242.938005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [242.938133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [242.938262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [242.938399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [242.938526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [242.938654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [242.938783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [242.950446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [242.950537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [242.950684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [242.950860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [242.951097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.951300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.951528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.951725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [242.951903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [242.952410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.952548] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [242.952986] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [242.953684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [242.953822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [242.961193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [242.961458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [242.961674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [242.962399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [242.963798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [242.963954] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 768000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [242.964192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B] <7> [242.964337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C] <7> [242.964469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D] <7> [242.964600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A] <7> [242.964731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B] <7> [242.964860] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C] <7> [242.965036] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [242.965258] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [242.965403] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [242.965593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [242.965800] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [242.966597] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [242.966732] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [242.983368] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:398:HDMI-A-2][ENCODER:397:DDI TC1/PHY C] Enable audio codec on [CRTC:149:pipe A], 36 bytes ELD <7> [242.999957] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [243.000313] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <7> [243.000900] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2] <7> [243.001422] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7> [243.003906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1] <7> [243.004222] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [243.004904] [IGT] i915_pm_rpm: exiting, ret=0 <7> [243.008245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2] <7> [243.018717] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [243.023341] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7> [243.023362] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7> [243.034046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [243.034051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30. <7> [243.034053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36. <7> [243.034055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48. <7> [243.034056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc. <7> [243.034058] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color. <7> [243.034061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV <7> [243.034067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [243.034069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3 <7> [243.034269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [243.034411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [243.034718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [243.034845] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [243.034870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1] <7> [243.050117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3] <6> [243.050333] Console: switching to colour frame buffer device 240x67

<7> [219.759610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [219.759617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [219.763848] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [219.763895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2]

<7> [219.763903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [219.789622] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [219.789626] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [219.789628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [219.789630] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [219.789632] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [219.789634] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [219.789636] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [219.789639] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [219.789641] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [219.789850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.789972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [219.790273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.790399] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.790903] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.790909] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.790913] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)

<7> [219.790917] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.790921] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.790925] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.790928] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.790935] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes:

<7> [219.790938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [219.790941] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790947] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.790950] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790955] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.790958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.790961] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.790969] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790972] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.790974] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.790977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.790980] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.790983] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5

<7> [219.790985] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5

<7> [219.790988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5

<7> [219.790991] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [219.790994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.790996] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.790999] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.791002] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.791004] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [219.791007] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.791010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.791013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [219.791015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [219.791018] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [219.791021] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [219.791024] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [219.791027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [219.791029] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [219.791032] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [219.791035] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [219.791038] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [219.791041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [219.791043] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [219.791046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5

<7> [219.791049] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [219.791052] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [219.791055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [219.791057] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [219.791060] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [219.791063] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [219.791065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [219.791068] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5

<7> [219.791071] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005

<7> [219.791074] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005

<7> [219.791076] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [219.791079] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [219.791082] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa

<7> [219.791085] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [219.791087] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [219.791090] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [219.791093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [219.791153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [219.791157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [219.795370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [219.795413] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [219.795416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [219.799593] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [219.803223] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [219.803228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [219.807420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [219.807801] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [219.807804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [219.812008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [219.812253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [219.812256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [219.816435] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [219.816723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1]

<7> [219.816726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [219.820909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:HDMI-A-1] disconnected

<7> [219.820923] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2]

<7> [219.820927] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [219.846682] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [219.846686] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [219.846688] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [219.846690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [219.846692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [219.846694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [219.846696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [219.846699] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [219.846701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [219.846897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.847017] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [219.847317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [219.847476] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.847963] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.847969] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.847973] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)

<7> [219.847977] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.847981] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.847985] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [219.847989] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)

<7> [219.847995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-2] probed modes:

<7> [219.847998] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [219.848001] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848003] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848006] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.848009] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848012] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848014] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.848017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.848020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848025] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.848028] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [219.848034] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [219.848036] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.848039] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [219.848042] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 30 167000 2880 2910 2920 3030 1800 1820 1828 1836 0x40 0x5

<7> [219.848045] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5

<7> [219.848047] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5

<7> [219.848050] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [219.848053] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848064] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [219.848067] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848070] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [219.848072] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5

<7> [219.848075] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [219.848078] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [219.848081] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [219.848083] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5

<7> [219.848086] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005

<7> [219.848089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005

<7> [219.848092] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [219.848095] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [219.848097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [219.848100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [219.848103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [219.848106] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5

<7> [219.848109] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [219.848111] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [219.848114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [219.848117] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [219.848120] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [219.848122] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005

<7> [219.848125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005

<7> [219.848128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5

<7> [219.848131] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005

<7> [219.848133] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005

<7> [219.848136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [219.848139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [219.848142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa

<7> [219.848144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa

<7> [219.848147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa

<7> [219.848150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [219.848152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [219.848176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]

<7> [219.848179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [219.852373] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected

<7> [219.852385] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3]

<7> [219.852387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [219.856596] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:410:HDMI-A-3] disconnected

<7> [220.871172] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]

<7> [220.871450] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [220.872057] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [220.872662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [220.873219] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [220.873812] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [220.874385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [220.874934] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [220.875493] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)

<7> [220.875964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [220.876093] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)

<7> [220.876224] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [220.876353] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)

<7> [220.876495] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [220.876624] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [220.876753] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [220.876884] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [220.877015] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [220.877144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [220.877274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [220.877418] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)

<7> [220.877548] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [220.877677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)

<7> [220.877805] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [220.877936] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)

<7> [220.878066] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [220.878196] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [220.878325] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [220.878464] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [220.878592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [220.878721] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [220.878854] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [220.878989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [220.879121] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [220.879250] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [220.879385] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [220.879514] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0)

<7> [220.879644] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)

<7> [220.879773] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)

<7> [220.879903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 222750, found 0)

<7> [220.880033] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)

<7> [220.880162] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000)

<7> [220.880292] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in avi infoframe

<7> [220.880426] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [220.880556] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [220.880568] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [220.880574] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [220.880576] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [220.880703] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in spd infoframe

<7> [220.880833] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [220.880961] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [220.880965] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [220.880966] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [220.881095] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hdmi infoframe

<7> [220.881222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [220.881349] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [220.881351] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [220.881490] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [220.881619] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0

<7> [220.881772] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [220.881902] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [220.882052] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2012) -> ( 0 - 0), size 2012 -> 0

<7> [220.882180] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb (2012 - 2048) -> ( 0 - 0), size 36 -> 0

<7> [220.882306] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [220.882439] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.882567] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.882692] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [220.882834] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [220.882968] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [220.883115] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 192000 kHz -> 0 kHz

<7> [220.883263] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [220.883420] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [220.883552] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 180000 kHz, actual 180000 kHz

<7> [220.883683] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [220.883816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset]

<7> [220.883949] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [220.884084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [220.884215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [220.884344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [220.884493] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [220.884623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [220.884806] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:398:HDMI-A-2][ENCODER:397:DDI TC1/PHY C] Disable audio codec on [CRTC:149:pipe A]

<7> [220.903094] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D

<7> [220.919657] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [220.927837] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [220.933004] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [220.933039] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [220.936485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [220.937028] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [220.937602] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [220.938093] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [220.938604] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [220.939275] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [220.939824] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [220.940097] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [220.940227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [220.940355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [220.940496] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [220.940625] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [220.940819] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [220.940998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [220.941158] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [220.941554] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B]

<7> [220.941675] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C]

<7> [221.046627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.047256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.047897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.049639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.050303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.056260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.057739] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [221.058615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [221.059427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [221.060022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [221.060825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [221.144054] [IGT] i915_pm_rpm: starting subtest system-suspend-execbuf

<7> [221.145235] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]

<7> [221.157538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.157878] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [221.158448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [221.159013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [221.159671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [221.160332] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [221.161029] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [221.161647] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [221.162281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [221.162976] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [221.163558] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [221.164229] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [221.166245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.166792] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.177020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.177204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.177536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.178388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.179853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [221.180064] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:267:pipe B]

<7> [221.184218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [221.184949] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:385:pipe C]

<7> [221.201418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.201797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.201966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.210012] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [221.210017] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [221.210019] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [221.210021] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [221.210023] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [221.210025] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [221.210028] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [221.210030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [221.210033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [221.210234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [221.210366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [221.210681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [221.210808] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [221.210894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.211883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.213306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [221.217493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [221.230473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.230706] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.230843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.232146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.232293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.235819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.237169] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [221.237476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [221.237759] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [221.237922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [221.238089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [221.419616] Freezing user space processes completed (elapsed 0.003 seconds)

<6> [221.421200] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

<7> [231.102498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [231.190087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [231.190253] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [231.190394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [231.190569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [231.190793] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [231.191008] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [231.191209] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [231.191406] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [231.191593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [231.191946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [231.192087] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [231.192483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [231.193192] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [231.193329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [231.200770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [231.200908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [231.205655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [231.233592] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [231.233597] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [231.233599] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [231.233601] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [231.233603] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [231.233605] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [231.233608] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [231.233612] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [231.233615] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [231.233836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [231.233961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [231.234271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [231.234395] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [231.234418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [231.238717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [231.243832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [231.248473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [231.275560] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [231.275563] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [231.275565] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [231.275567] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [231.275569] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [231.275572] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [231.275574] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [231.275576] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [231.275579] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [231.275777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [231.275897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [231.276208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [231.276332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [231.276353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [231.281524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [231.286403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [233.941266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [233.941442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [233.942242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [233.943631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [233.944044] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [233.948624] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [233.948655] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [233.956063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [233.956228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [233.956373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [233.956509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [233.957780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [233.959074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [233.959224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [233.960010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [233.961392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [233.961582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [233.961802] i915 0000:00:02.0: [drm:drm_client_dev_suspend] fbdev: ret=0

<7> [233.963531] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<3> [233.984338] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [234.334632] PM: start suspend of devices complete after 535.371 msecs

<7> [234.356196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [234.356595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [234.356873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [234.357190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [234.357470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [234.358868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [234.360137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [234.361515] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [234.361989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [234.362267] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [234.362419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [234.362712] PM: late suspend of devices complete after 28.078 msecs

<7> [234.630304] PM: noirq suspend of devices complete after 266.717 msecs

<6> [234.630393] ACPI: \_SB_.PC00.GFX0: LPI: Device not power manageable

<6> [234.630425] ACPI: \_SB_.PC00.HECI: LPI: Device not power manageable

<6> [234.630431] ACPI: \_SB_.PC00.GNA0: LPI: Device not power manageable

<6> [234.633566] ACPI: \_SB_.PEPD: Successfully transitioned to state screen off

<6> [234.767840] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 entry

<6> [237.074981] ACPI: \_SB_.PEPD: Successfully transitioned to state lps0 exit

<6> [237.077937] ACPI: \_SB_.PEPD: Successfully transitioned to state screen on

<7> [237.438963] PM: noirq resume of devices complete after 361.030 msecs

<7> [237.446904] i915 0000:00:02.0: [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08

<7> [237.447636] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [237.448234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [237.448927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [237.449645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [237.450318] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [237.451017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [237.451298] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [237.451591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [237.452035] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [237.452173] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [237.452516] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [237.453202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [237.453336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [237.453477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [237.453772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [237.453922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [237.454186] PM: early resume of devices complete after 8.566 msecs

<7> [237.459467] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [237.459760] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied.

<7> [237.460337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: disabled

<7> [237.460674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled

<7> [237.460987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled

<7> [237.461183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [237.461381] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [237.461589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [237.461784] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [237.461976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [237.462169] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [237.462362] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B

<7> [237.462531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B

<7> [237.462676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B

<7> [237.462818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B

<7> [237.462961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B

<7> [237.463104] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B

<7> [237.463247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C

<7> [237.463391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C

<7> [237.463566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C

<7> [237.463718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C

<7> [237.463864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C

<7> [237.464011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C

<7> [237.464158] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:387:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [237.464301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:397:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [237.464443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:401:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [237.464589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:403:DP-MST A] hw state readout: disabled, pipe A

<7> [237.464718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:404:DP-MST B] hw state readout: disabled, pipe B

<7> [237.464846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:405:DP-MST C] hw state readout: disabled, pipe C

<7> [237.464991] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [237.465140] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [237.465295] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [237.465552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:388:HDMI-A-1] hw state readout: disabled

<7> [237.465719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:398:HDMI-A-2] hw state readout: disabled

<7> [237.465876] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:402:DP-1] hw state readout: disabled

<7> [237.466029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:410:HDMI-A-3] hw state readout: disabled

<7> [237.466159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [237.466289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [237.466418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [237.466555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [237.466682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [237.466810] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [237.466939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [237.467073] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz

<7> [237.467203] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz

<7> [237.467333] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz

<7> [237.467462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz

<7> [237.467607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz

<7> [237.467735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz

<7> [237.467863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz

<7> [237.467992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz

<7> [237.468211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz

<7> [237.468431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz

<7> [237.468605] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz

<7> [237.468756] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz

<7> [237.468971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz

<7> [237.469124] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz

<7> [237.469276] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [237.469524] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [237.469667] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [237.469910] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 0 num active planes 0

<7> [237.470067] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0

<7> [237.470248] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0

<7> [237.470515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [237.470742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state]

<7> [237.470891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state]

<7> [237.471273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [237.471442] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [237.471616] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.471752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [237.471883] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.472020] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [237.472156] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state

<7> [237.472288] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [237.472417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.472583] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [237.472711] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.472861] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [237.472989] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:385:pipe C] fastset requirement not met in dpll_hw_state

<7> [237.473117] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [237.473246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x0, cfgcr1: 0x0, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.473376] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [237.473515] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [237.473649] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset

<7> [237.473825] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [237.473962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: no [modeset]

<7> [237.474094] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [237.474224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [237.474353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [237.474488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [237.474617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [237.474746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [237.474874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [modeset]

<7> [237.475002] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:151:plane 1B] fb: [NOFB], visible: no

<7> [237.475131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [237.475259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [237.475387] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [237.475523] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [237.475650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [237.475779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [modeset]

<7> [237.475907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:269:plane 1C] fb: [NOFB], visible: no

<7> [237.476034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:299:plane 2C] fb: [NOFB], visible: no

<7> [237.476161] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:329:plane 3C] fb: [NOFB], visible: no

<7> [237.476287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:359:plane 4C] fb: [NOFB], visible: no

<7> [237.476415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:369:plane 5C] fb: [NOFB], visible: no

<7> [237.476550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:379:cursor C] fb: [NOFB], visible: no

<7> [237.476754] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [237.476888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [237.477020] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [237.477150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [237.477280] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [237.477410] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [237.477552] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [237.477711] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [237.477866] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:402:DP-1]

<7> [237.478018] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [237.478217] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [237.478462] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B]

<7> [237.478705] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C]

<7> [237.479681] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<7> [237.479822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [237.484019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [237.487015] i915 0000:00:02.0: [drm:drm_client_dev_resume] fbdev: ret=0

<7> [237.487401] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [237.492173] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [237.492275] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<3> [237.499098] igc 0000:03:00.0 enp3s0: Timeout reading IGC_PTM_STAT register

<7> [237.509865] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [237.509870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [237.509873] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [237.509875] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [237.509877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [237.509879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [237.509882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [237.509884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [237.509887] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [237.510082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [237.510205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [237.510523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [237.510661] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [237.510683] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [237.514881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [237.567639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [237.567807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [237.567953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [237.568092] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [237.568223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [237.569486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<3> [237.718709] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0

<3> [238.094780] atkbd serio0: Failed to enable keyboard on isa0060/serio0

<7> [238.136598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [238.136717] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [238.137729] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [238.141233] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [238.142218] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])

<7> [238.142685] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [238.143372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [238.143789] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [238.144047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [238.144345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [238.259662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [238.260038] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [238.260689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [238.261319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [238.262018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.262696] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.263329] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.264005] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.264626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [238.265268] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [238.265876] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [238.266592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [238.268614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [238.269150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [238.278168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [238.278402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [238.278795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [238.283652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [238.316862] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [238.316868] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [238.316870] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [238.316872] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [238.316874] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [238.316876] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [238.316879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [238.316882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [238.316884] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [238.317087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.317213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [238.317522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.317649] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [238.317670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [238.322878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [238.422772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [238.423405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [238.429310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [238.430771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [238.431428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [238.432215] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [238.432796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [238.433402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [238.497643] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [238.498019] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [238.498667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [238.499284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [238.499977] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.500685] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.501395] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.502132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.502772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [238.503419] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [238.504022] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [238.504737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [238.506767] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [238.507317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [238.516406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [238.516718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [238.517092] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [238.521854] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [238.552709] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [238.552714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [238.552716] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [238.552718] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [238.552720] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [238.552722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [238.552725] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [238.552727] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [238.552730] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [238.552937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.553059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [238.553355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.553788] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [238.553809] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [238.558695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [238.662751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [238.663371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [238.669302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [238.670652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [238.670910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [238.671188] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [238.671323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [238.671499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [238.734636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [238.735008] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [238.735651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [238.736261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [238.736950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.737628] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.738326] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.739056] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.739688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [238.740333] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [238.740971] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [238.741753] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [238.743916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [238.744483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [238.754759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [238.754969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [238.755275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [238.759946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [238.790685] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [238.790690] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [238.790692] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [238.790694] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [238.790696] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [238.790698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [238.790701] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [238.790704] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [238.790707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [238.790904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.791028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [238.791332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [238.791477] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [238.791498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [238.796703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [238.894631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [238.895325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [238.901229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [238.902699] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [238.903368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [238.904172] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [238.904761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [238.905382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [238.968633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [238.969007] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [238.969641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [238.970260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [238.970956] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.971640] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.972286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.972964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [238.973592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [238.974242] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [238.974835] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [238.975560] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [238.977584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [238.978137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [238.987225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [238.987479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [238.987830] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [238.992546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [239.025484] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [239.025489] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [239.025491] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [239.025493] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [239.025495] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [239.025498] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [239.025501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [239.025503] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [239.025506] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [239.025983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.026106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.026410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.027119] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.027140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [239.031976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [239.094793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [239.095413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [239.102522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [239.103986] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [239.104606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [239.105248] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [239.105749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [239.106310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [239.201623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [239.202000] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [239.202640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [239.203251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [239.203938] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.204612] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.205296] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.206048] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.206683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [239.207322] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [239.207916] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [239.208376] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [239.209060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [239.209193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [239.215367] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [239.215565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [239.215781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [239.220338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [239.251069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [239.251073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [239.251075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [239.251077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [239.251079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [239.251081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [239.251084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [239.251087] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [239.251089] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [239.251294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.251414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.252431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.252560] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.252581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [239.257088] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [239.326643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [239.327266] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [239.333144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [239.334568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [239.334810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [239.335088] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [239.335223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [239.335395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [239.429874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [239.430248] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [239.430902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [239.431534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [239.432192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.432892] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.433553] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.434196] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.434840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [239.435575] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [239.436181] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [239.437025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [239.439089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [239.439680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [239.448751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [239.449011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [239.449390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [239.454162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [239.486278] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [239.486283] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [239.486285] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [239.486287] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [239.486289] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [239.486291] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [239.486294] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [239.486296] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [239.486299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [239.487251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.487375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.487694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.487821] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.487842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [239.492142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [239.558684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [239.559370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [239.565346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [239.566786] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [239.567500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [239.568229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [239.568808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [239.569426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [239.663636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [239.664013] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [239.664663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [239.665282] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [239.665991] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.666687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.667334] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.668016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.668654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [239.669297] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [239.669938] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [239.670726] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [239.672873] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [239.673505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [239.683785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [239.683971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [239.684241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [239.688870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [239.721034] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [239.721039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [239.721041] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [239.721043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [239.721045] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [239.721047] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [239.721050] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [239.721052] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [239.721055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [239.721257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.721377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.722376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.722512] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.722533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [239.727053] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [239.790648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [239.791328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [239.794897] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [239.796243] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [239.796515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [239.796793] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [239.796928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [239.797097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [239.897609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [239.897985] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [239.898626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [239.899237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [239.899931] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.900609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.901246] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.901969] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [239.902682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [239.903326] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [239.904001] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [239.904875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [239.905560] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [239.905696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [239.913063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [239.913255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [239.913552] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [239.918166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [239.950349] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [239.950353] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [239.950355] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [239.950357] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [239.950359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [239.950361] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [239.950364] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [239.950367] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [239.950369] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [239.951242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.951365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [239.951683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [239.951811] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [239.951832] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [239.956134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [240.022673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [240.023293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [240.025128] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [240.025143] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [240.025149] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [240.029203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [240.030641] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [240.031284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [240.032041] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [240.032640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [240.033234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [240.126598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [240.126972] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [240.127608] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [240.128215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [240.128937] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.129652] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.130350] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.131102] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<6> [240.131753] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [240.131766] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [240.131772] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [240.131805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [240.132460] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [240.133031] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [240.133847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [240.135908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [240.136553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [240.146885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [240.147106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [240.147447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [240.152123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [240.184411] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [240.184417] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [240.184419] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [240.185481] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [240.185483] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [240.185485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [240.185514] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [240.185516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [240.185519] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [240.185714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.185839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [240.186141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.186270] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [240.186291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [240.191632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [240.254643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [240.255320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [240.258885] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [240.260214] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [240.260487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [240.260765] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [240.260901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [240.261070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [240.361636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [240.362013] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [240.362684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [240.363311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [240.364046] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.364773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.365520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.366154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.366802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [240.367496] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [240.368045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [240.368809] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [240.370942] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [240.371505] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [240.381720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [240.381936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [240.382196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [240.386842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [240.418755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [240.418760] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [240.418762] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [240.418764] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [240.418766] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [240.418768] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [240.418771] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [240.418774] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [240.418776] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [240.418975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.419100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [240.419436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.419563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [240.419585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [240.424742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [240.526749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [240.527526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [240.533403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [240.534829] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [240.535561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [240.536296] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [240.536927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [240.537508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [240.599585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [240.599960] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [240.600594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [240.601214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [240.601904] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.602582] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.603294] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.604014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.604655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [240.605296] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [240.605962] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [240.606761] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [240.607526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [240.607659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [240.615032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [240.615174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [240.615372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [240.619982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [240.651066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [240.651071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [240.651073] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [240.651075] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [240.651077] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [240.651079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [240.651082] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [240.651085] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [240.651088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [240.651295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.651431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [240.652253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.652378] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [240.652405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [240.656878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [240.758637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [240.759320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [240.765286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [240.766672] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [240.766901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [240.767179] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [240.767314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [240.767523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [240.829545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [240.829918] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [240.830553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [240.831169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [240.831861] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.832576] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.833282] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.833990] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [240.834683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [240.835410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [240.835968] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [240.836695] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [240.838719] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [240.839271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [240.848398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [240.848707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [240.849032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [240.853701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [240.885885] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [240.885890] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [240.885892] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [240.885894] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [240.885896] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [240.885898] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [240.885901] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [240.885904] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [240.885907] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [240.886114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.886237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [240.886544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [240.886672] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [240.886693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [240.891884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [240.958708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [240.959330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [240.965262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [240.966704] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [240.967348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [240.968110] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [240.968709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [240.969302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [241.062575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [241.062949] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [241.063585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [241.064197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [241.064887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.065564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.066212] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.066889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.067571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [241.068274] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [241.068909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [241.069628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [241.071655] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [241.072209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [241.081336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [241.081639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [241.082000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [241.086706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [241.118700] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [241.118706] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [241.118708] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [241.118710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [241.118712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [241.118714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [241.118717] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [241.118719] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [241.118722] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [241.118931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.119056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [241.119374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.119501] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [241.119521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [241.124701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [241.190585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [241.191263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [241.192744] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [241.192761] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [241.192768] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [241.197204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [241.198579] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [241.198810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [241.199090] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [241.199226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [241.199408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [241.295579] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [241.295952] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [241.296590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [241.297205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [241.297983] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.298738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.299463] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.300098] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.300819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [241.301540] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [241.302113] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [241.302740] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [241.303421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [241.303553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [241.310948] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [241.311098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [241.311308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [241.315879] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [241.347930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [241.347935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [241.347937] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [241.347939] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [241.347941] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [241.347943] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [241.347946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [241.347948] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [241.347951] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [241.348162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.348283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [241.349333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.349475] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [241.349496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [241.354123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [241.454917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [241.455661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [241.461479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [241.462946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [241.463661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [241.464415] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [241.464966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [241.465594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [241.524559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [241.524929] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [241.525563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [241.526175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [241.526870] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.527602] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.528313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.529014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.529715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [241.530426] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [241.530972] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [241.531794] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [241.533865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [241.534499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [241.546070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [241.546411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [241.546786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [241.552680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [241.585247] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [241.585253] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [241.585255] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [241.585257] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [241.585259] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [241.585261] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [241.585264] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [241.585267] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [241.585269] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [241.585474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.585608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [241.585924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.586056] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [241.586079] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [241.590853] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [241.654593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [241.655271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [241.661254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [241.662747] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [241.663473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [241.664209] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [241.664830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [241.665454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [241.760559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [241.760934] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [241.761571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [241.762184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [241.762868] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.763539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.764249] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.765010] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.765704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [241.766427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [241.767029] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [241.767802] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [241.769933] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [241.770528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [241.780884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [241.781145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [241.781502] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [241.786103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [241.818030] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [241.818035] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [241.818037] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [241.818039] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [241.818041] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [241.818043] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [241.818046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [241.818049] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [241.818051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [241.818256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.819125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [241.819428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [241.819555] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [241.819576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [241.824047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [241.894573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [241.895248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [241.901207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [241.902667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [241.903400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [241.904131] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [241.904731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [241.905339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [241.995580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [241.995955] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [241.996596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [241.997206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [241.997915] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.998599] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [241.999280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.000035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.000739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [242.001448] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.002008] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [242.002677] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [242.003361] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [242.003495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [242.010893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [242.011043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [242.011258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [242.015806] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [242.048172] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [242.048177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [242.048179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [242.048181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [242.048183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [242.048185] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [242.048188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [242.048190] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [242.048193] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [242.049122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.049247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [242.049561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.049686] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [242.049706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [242.054037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [242.118567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [242.119243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [242.125202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [242.126557] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [242.126787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [242.127064] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [242.127201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [242.127387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [242.224543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [242.224917] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [242.225555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [242.226172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [242.226869] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.227634] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.228358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.229062] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.229778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [242.230502] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.231097] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [242.231875] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [242.233898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [242.234467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [242.243518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [242.243780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [242.244138] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [242.248882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [242.282062] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [242.282067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [242.282069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [242.282071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [242.282074] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [242.282076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [242.282079] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [242.282081] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [242.282084] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [242.282291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.283175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [242.283518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.283643] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [242.283664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [242.288102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [242.390540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [242.391211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [242.397186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [242.398744] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [242.399494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [242.400286] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [242.400903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [242.401640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [242.457541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [242.457914] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [242.458553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [242.459168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [242.459859] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.460531] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.461239] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.461976] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.462623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [242.463353] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.463946] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [242.464679] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [242.466815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [242.467381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [242.476430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [242.476693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [242.477056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [242.481818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [242.515170] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [242.515175] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [242.515177] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [242.515179] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [242.515181] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [242.515183] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [242.515186] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [242.515188] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [242.515191] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [242.516212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.516341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [242.516648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.516774] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [242.516795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [242.521099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [242.622547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [242.623216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<6> [242.624174] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:01:00.0

<4> [242.624191] nvme 0000:01:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [242.624198] nvme 0000:01:00.0: device [15b7:5006] error status/mask=00000001/0000e000

<7> [242.629201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [242.630546] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [242.630805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [242.631084] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [242.631220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [242.631402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [242.690532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [242.690908] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [242.691549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [242.692159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [242.692851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.693523] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.694237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.694945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.695632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [242.696364] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.696909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [242.697617] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [242.699783] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [242.700348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [242.709406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [242.709704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [242.710004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [242.714651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [242.745917] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [242.745922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [242.745924] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [242.745926] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [242.745928] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [242.745930] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [242.745933] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [242.745936] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [242.745938] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [242.746143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.746264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [242.746882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [242.747007] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [242.747030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [242.751609] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<7> [242.822548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [242.823224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [242.829230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [242.830764] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [242.831500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [242.832241] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [242.832880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [242.833600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [242.912693] [IGT] i915_pm_rpm: finished subtest system-suspend-execbuf, SUCCESS

<7> [242.916785] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [242.917373] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [242.917948] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:397:DDI TC1/PHY C] [CRTC:149:pipe A]

<7> [242.918528] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [242.919102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [242.919702] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [242.920287] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [242.920944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [242.921594] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [242.922142] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [242.922728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)

<7> [242.923306] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [242.923968] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)

<7> [242.924574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [242.924800] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)

<7> [242.924929] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [242.925059] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [242.925188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [242.925318] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [242.925458] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [242.925587] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [242.925716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [242.925843] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)

<7> [242.925973] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [242.926102] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)

<7> [242.926231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [242.926370] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)

<7> [242.926502] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [242.926630] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [242.926760] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [242.926888] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [242.927017] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [242.927146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [242.927274] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [242.927508] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [242.927639] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [242.927768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [242.927896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [242.928024] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36)

<7> [242.928153] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)

<7> [242.928281] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)

<7> [242.928427] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 222750)

<7> [242.928558] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)

<7> [242.928687] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006)

<7> [242.928816] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in avi infoframe

<7> [242.928944] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [242.929072] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [242.929199] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [242.929213] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [242.929220] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [242.929222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in spd infoframe

<7> [242.929365] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [242.929494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [242.929621] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [242.929626] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [242.929627] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in hdmi infoframe

<7> [242.929755] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected:

<7> [242.929882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found:

<7> [242.930010] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [242.930014] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [242.930179] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [242.930310] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [242.930453] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2012), size 0 -> 2012

<7> [242.930579] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (2012 - 2048), size 0 -> 36

<7> [242.930704] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [242.930833] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 3, 5, 9, 10, 0, 0, 0

<7> [242.930966] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 49, 81, 145, 161, 30, 0, 0

<7> [242.931094] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 55, 91, 161, 179, 31, 0, 0

<7> [242.931238] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:149:pipe A] data rate 594000 num active planes 1

<7> [242.931383] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 594

<7> [242.931514] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [242.931658] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 192000 kHz

<7> [242.931803] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [242.931933] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [242.932062] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [242.932190] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [242.932320] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0

<7> [242.932468] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0

<7> [242.932606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [242.932741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [242.932875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [242.933007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [242.933140] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [242.933272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [242.933413] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [242.933542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [242.933670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x6

<7> [242.933799] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [242.933811] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [242.933818] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [242.933820] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [242.933824] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [242.933826] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [242.933829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [242.933958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [242.934086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ELD: 07 00 00 00

<7> [242.934214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [242.934351] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [242.934482] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [242.934610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [242.934740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [242.934868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [242.934997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [242.935126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [242.935254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [242.935390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [242.935518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 119, ips linetime: 0

<7> [242.935645] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [242.935774] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [242.935904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [242.936034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x800173, cfgcr1: 0xa84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [242.936165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [242.936295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [242.936438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [242.936567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.936697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.936829] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.936962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [242.937092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [242.937223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.937361] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.937491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [242.937620] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [242.937749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [242.937877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:414] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [242.938005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [242.938133] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [242.938262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [242.938399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [242.938526] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [242.938654] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [242.938783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [242.950446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [242.950537] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [242.950684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [242.950860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [242.951097] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.951300] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.951528] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.951725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [242.951903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [242.952410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.952548] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [242.952986] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [242.953684] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [242.953822] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [242.961193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [242.961458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [242.961674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [242.962399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [242.963798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [242.963954] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 768000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [242.964192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:387:DDI B/PHY B]

<7> [242.964337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:397:DDI TC1/PHY C]

<7> [242.964469] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:401:DDI TC2/PHY D]

<7> [242.964600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:403:DP-MST A]

<7> [242.964731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:404:DP-MST B]

<7> [242.964860] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:405:DP-MST C]

<7> [242.965036] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [242.965258] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [242.965403] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [242.965593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [242.965800] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [242.966597] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [242.966732] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [242.983368] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:398:HDMI-A-2][ENCODER:397:DDI TC1/PHY C] Enable audio codec on [CRTC:149:pipe A], 36 bytes ELD

<7> [242.999957] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [243.000313] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<7> [243.000900] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [243.001422] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A]

<7> [243.003906] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:388:HDMI-A-1]

<7> [243.004222] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [243.008245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:398:HDMI-A-2]

<7> [243.018717] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [243.023341] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL

<7> [243.023362] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled

<7> [243.034046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [243.034051] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 30.

<7> [243.034053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 36.

<7> [243.034055] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does deep color 48.

<7> [243.034056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] Assigning HDMI sink color depth as 16 bpc.

<7> [243.034058] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI sink does YCRCB444 in deep color.

<7> [243.034061] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD monitor Mi TV

<7> [243.034067] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [243.034069] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:398:HDMI-A-2] ELD size 36, SAD count 3

<7> [243.034269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [243.034411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [243.034718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [243.034845] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [243.034870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:402:DP-1]

<7> [243.050117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:410:HDMI-A-3]

<6> [243.050333] Console: switching to colour frame buffer device 240x67

Results for igt@i915_pm_rpm@system-suspend-execbuf