<5>[ 0.000000] Linux version 6.18.0-CI_DRM_17659-g3adb3f4aa5a8+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Dec 10 23:20:04 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a39fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3a000-0x0000000063db1fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db2000-0x0000000063ed6fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063ed7000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e0c000 SMBIOS=0x60b11000 MEMATTR=0x5bd90698 ESRT=0x5bda2798 MOKvar=0x60c46000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem304: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem306: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000017] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000022] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000023] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000610] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000611] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.004995] esrt: Reserving ESRT space from 0x000000005bda2798 to 0x000000005bda28c0. <7>[ 0.005006] e820: update [mem 0x5bda2000-0x5bda2fff] usable ==> reserved <6>[ 0.005028] Using GB pages for direct mapping <6>[ 0.005756] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005759] printk: early log buf free: 258712(98%) <6>[ 0.005760] Secure boot disabled <6>[ 0.005762] ACPI: Early table checksum verification disabled <6>[ 0.005767] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005772] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005777] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005781] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005784] ACPI: FACS 0x0000000063DF2000 000040 <6>[ 0.005785] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005787] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005788] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005790] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005791] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005793] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005795] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005796] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005798] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005799] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005801] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005802] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005804] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005805] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005807] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005808] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005810] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005811] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005813] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005814] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005816] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005817] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005819] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005820] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005822] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005823] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005825] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005826] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005828] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005829] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005831] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005832] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005834] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005836] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005837] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005839] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005840] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005842] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005843] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005845] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005846] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005848] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005849] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005850] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005852] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005852] ACPI: Reserving FACS table memory at [mem 0x63df2000-0x63df203f] <6>[ 0.005853] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005853] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005854] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005854] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005854] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005855] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005856] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005856] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005856] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005857] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005858] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005858] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005859] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005859] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005859] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005860] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005860] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005860] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005861] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005861] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005862] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005862] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005862] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005863] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005863] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005863] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005864] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005864] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005865] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005865] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005865] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005866] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005866] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005867] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005867] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005868] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005868] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005868] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005869] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.005959] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006169] No NUMA configuration found <6>[ 0.006169] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006176] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006322] Zone ranges: <6>[ 0.006323] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006325] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006326] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006326] Device empty <6>[ 0.006327] Movable zone start for each node <6>[ 0.006328] Early memory node ranges <6>[ 0.006328] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006329] node 0: [mem 0x0000000000100000-0x0000000060a39fff] <6>[ 0.006330] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006330] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006331] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006338] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006361] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008529] On node 0, zone DMA32: 13765 pages in unavailable ranges <6>[ 0.050476] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.050955] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.050960] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.050961] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.050965] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051010] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051012] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051016] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051017] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051034] e820: update [mem 0x5bd41000-0x5bd5bfff] usable ==> reserved <6>[ 0.051042] TSC deadline timer available <6>[ 0.051045] CPU topo: Max. logical packages: 1 <6>[ 0.051046] CPU topo: Max. logical dies: 1 <6>[ 0.051046] CPU topo: Max. dies per package: 1 <6>[ 0.051048] CPU topo: Max. threads per core: 2 <6>[ 0.051049] CPU topo: Num. cores per package: 16 <6>[ 0.051049] CPU topo: Num. threads per package: 22 <6>[ 0.051049] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051067] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051069] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051070] PM: hibernation: Registered nosave memory: [mem 0x5bd41000-0x5bd5bfff] <6>[ 0.051071] PM: hibernation: Registered nosave memory: [mem 0x5bda2000-0x5bda2fff] <6>[ 0.051073] PM: hibernation: Registered nosave memory: [mem 0x60a3a000-0x63ffefff] <6>[ 0.051074] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051077] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051077] Booting paravirtualized kernel on bare hardware <6>[ 0.051080] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051091] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052581] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.052588] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052590] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052594] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052597] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052625] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052758] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052781] random: crng init done <6>[ 0.055587] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.056989] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057131] software IO TLB: area num 32. <6>[ 0.068560] Fallback order for Node 0: 0 <6>[ 0.068565] Built 1 zonelists, mobility grouping on. Total pages: 8260057 <6>[ 0.068566] Policy zone: Normal <6>[ 0.068580] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068581] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068584] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.070025] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.111777] ********************************************************** <4>[ 0.111777] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.111778] ** ** <4>[ 0.111778] ** This system shows unhashed kernel memory addresses ** <4>[ 0.111778] ** via the console, logs, and other interfaces. This ** <4>[ 0.111779] ** might reduce the security of your system. ** <4>[ 0.111779] ** ** <4>[ 0.111779] ** If you see this message and you are not debugging ** <4>[ 0.111779] ** the kernel, report this immediately to your system ** <4>[ 0.111779] ** administrator! ** <4>[ 0.111780] ** ** <4>[ 0.111780] ** Use hash_pointers=always to force this mode off ** <4>[ 0.111780] ** ** <4>[ 0.111780] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.111780] ********************************************************** <6>[ 0.113234] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.123832] ftrace: allocating 60619 entries in 240 pages <6>[ 0.123834] ftrace: allocated 240 pages with 4 groups <6>[ 0.125583] Dynamic Preempt: voluntary <6>[ 0.126639] Running RCU self tests <6>[ 0.126640] Running RCU synchronous self tests <6>[ 0.126641] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.126642] rcu: RCU lockdep checking is enabled. <6>[ 0.126642] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.126643] Trampoline variant of Tasks RCU enabled. <6>[ 0.126643] Rude variant of Tasks RCU enabled. <6>[ 0.126643] Tracing variant of Tasks RCU enabled. <6>[ 0.126644] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.126644] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.126769] Running RCU synchronous self tests <6>[ 0.126778] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.126783] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.126787] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.138634] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.139207] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.139812] Console: colour dummy device 80x25 <6>[ 0.139822] printk: legacy console [tty0] enabled <6>[ 0.140981] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.140989] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.140993] ... MAX_LOCK_DEPTH: 48 <6>[ 0.140997] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.141000] ... CLASSHASH_SIZE: 4096 <6>[ 0.141004] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.141008] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.141012] ... CHAINHASH_SIZE: 262144 <6>[ 0.141016] memory used by lock dependency info: 54145 kB <6>[ 0.141025] memory used for stack traces: 4224 kB <6>[ 0.141029] per task-struct memory footprint: 1920 bytes <6>[ 0.141100] ACPI: Core revision 20250807 <6>[ 0.142073] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.142131] APIC: Switch to symmetric I/O mode setup <6>[ 0.142137] DMAR: Host address width 42 <6>[ 0.142141] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.142180] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.142189] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.142208] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.142215] DMAR: SATC flags: 0x1 <6>[ 0.142226] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.142232] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.142237] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.143944] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.148356] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.148376] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.148443] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.148449] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.148648] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.148653] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.148660] process: using mwait in idle threads <6>[ 0.148667] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.148679] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.148686] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.148691] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.148696] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.148704] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.148722] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.148728] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.148733] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.148739] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.148745] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.148751] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.148757] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.148762] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.148767] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.148772] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.148777] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.149369] Freeing SMP alternatives memory: 56K <6>[ 0.149369] pid_max: default: 32768 minimum: 301 <6>[ 0.149369] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.149369] landlock: Up and running. <6>[ 0.149369] Yama: becoming mindful. <6>[ 0.149369] AppArmor: AppArmor initialized <6>[ 0.149369] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.149369] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.149369] Running RCU synchronous self tests <6>[ 0.149369] Running RCU synchronous self tests <6>[ 0.149369] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.149369] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.149534] core: cpu_core PMU driver: <6>[ 0.149543] ... version: 5 <6>[ 0.149547] ... bit width: 48 <6>[ 0.149551] ... generic counters: 8 <6>[ 0.149555] ... generic bitmap: 00000000000000ff <6>[ 0.149559] ... fixed-purpose counters: 4 <6>[ 0.149563] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.149567] ... value mask: 0000ffffffffffff <6>[ 0.149572] ... max period: 00007fffffffffff <6>[ 0.149577] ... global_ctrl mask: 0001000f000000ff <6>[ 0.149764] signal: max sigframe size: 3632 <6>[ 0.149796] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.149959] rcu: Hierarchical SRCU implementation. <6>[ 0.149964] rcu: Max phase no-delay instances is 400. <6>[ 0.150138] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.152981] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.153776] smp: Bringing up secondary CPUs ... <6>[ 0.154199] smpboot: x86: Booting SMP configuration: <6>[ 0.154206] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010022] core: cpu_atom PMU driver: <6>[ 0.010022] ... version: 5 <6>[ 0.010022] ... bit width: 48 <6>[ 0.010022] ... generic counters: 8 <6>[ 0.010022] ... generic bitmap: 00000000000000ff <6>[ 0.010022] ... fixed-purpose counters: 3 <6>[ 0.010022] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010022] ... value mask: 0000ffffffffffff <6>[ 0.010022] ... max period: 00007fffffffffff <6>[ 0.010022] ... global_ctrl mask: 00000007000000ff <5>[ 0.168474] #2 #4 #5 #7 #9 #11 <6>[ 0.174452] smp: Brought up 1 node, 22 CPUs <6>[ 0.174482] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.177548] Memory: 32226208K/33040228K available (25429K kernel code, 5652K rwdata, 9520K rodata, 5704K init, 68232K bss, 779976K reserved, 0K cma-reserved) <6>[ 0.181715] devtmpfs: initialized <6>[ 0.181760] x86/mm: Memory block size: 128MB <6>[ 0.207033] ACPI: PM: Registering ACPI NVS region [mem 0x63db2000-0x63ed6fff] (1200128 bytes) <6>[ 0.207846] Running RCU synchronous self tests <6>[ 0.207865] Running RCU synchronous self tests <6>[ 0.207881] Running RCU Tasks wait API self tests <6>[ 0.207881] Running RCU Tasks Rude wait API self tests <6>[ 0.207881] Running RCU Tasks Trace wait API self tests <6>[ 0.220397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.220655] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.220935] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.221550] pinctrl core: initialized pinctrl subsystem <6>[ 0.222260] PM: RTC time: 05:02:23, date: 2025-12-11 <6>[ 0.223159] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.224447] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.224838] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.225237] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.225297] audit: initializing netlink subsys (disabled) <5>[ 0.225388] audit: type=2000 audit(1765429343.077:1): state=initialized audit_enabled=0 res=1 <6>[ 0.226222] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.226224] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.226230] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.226235] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.226239] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.226279] cpuidle: using governor ladder <6>[ 0.226279] cpuidle: using governor menu <6>[ 0.226476] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.226977] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.227006] PCI: Using configuration type 1 for base access <6>[ 0.227440] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.228412] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.228420] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.228425] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.228431] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.231161] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.231169] raid6: using avx2x2 recovery algorithm <6>[ 0.231944] fbcon: Taking over console <6>[ 0.232126] ACPI: Added _OSI(Module Device) <6>[ 0.232127] ACPI: Added _OSI(Processor Device) <6>[ 0.232128] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.239379] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.828090] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.840476] ACPI: EC: EC started <6>[ 0.840486] ACPI: EC: interrupt blocked <6>[ 0.843314] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.843319] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.950373] Callback from call_rcu_tasks() invoked. <6>[ 1.124582] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.124599] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.218925] ACPI: Interpreter enabled <6>[ 1.219115] ACPI: PM: (supports S0 S4 S5) <6>[ 1.219124] ACPI: Using IOAPIC for interrupt routing <6>[ 1.230456] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.230474] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.280325] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.280367] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.365875] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.695458] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.729208] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.743157] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.768834] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.780280] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.792685] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.805309] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.034630] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.035216] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.035770] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.200013] ACPI: \_TZ_.FN00: New power resource <6>[ 2.201116] ACPI: \_TZ_.FN01: New power resource <6>[ 2.202182] ACPI: \_TZ_.FN02: New power resource <6>[ 2.203260] ACPI: \_TZ_.FN03: New power resource <6>[ 2.204926] ACPI: \_TZ_.FN04: New power resource <6>[ 2.210596] ACPI: \PIN_: New power resource <6>[ 2.216708] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.216739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.221322] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.229192] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.252428] PCI host bridge to bus 0000:00 <6>[ 2.252490] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.252506] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.252521] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.252537] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.252553] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.252571] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.270010] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.271134] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.271186] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.271203] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.271261] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.271277] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.271349] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.271448] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.271462] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.273973] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.274027] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.277337] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.277381] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.277401] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.279183] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.279226] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.279245] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.279395] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.279499] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.290308] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.290352] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.290368] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.290381] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.290505] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.290597] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.299381] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.299425] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.299441] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.299463] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.299584] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.299666] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.308367] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.308415] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.309231] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.309273] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.309294] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.309709] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.309751] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.309766] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.310658] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.310750] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.310854] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.314733] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.314837] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.314852] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.314920] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.314929] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.317635] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.317685] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.317754] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.323659] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.323711] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.323783] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.327775] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.327835] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.327850] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.328331] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.328456] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.341348] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.341419] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.353875] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.353950] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.365783] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.365855] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.377935] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.378000] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.378079] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.382974] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.383027] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.383038] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.383452] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.383519] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.394295] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.394377] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.406861] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.409435] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.409559] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.409580] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.409712] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.410634] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.410695] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.410713] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.413014] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.413129] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.413536] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.413625] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.413723] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.416689] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.416855] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.419065] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.419375] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.419679] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.847259] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 7.656308] Low-power S0 idle used by default for system suspend <6>[ 7.773657] ACPI: EC: interrupt unblocked <6>[ 7.773677] ACPI: EC: event unblocked <6>[ 7.774372] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.774372] ACPI: EC: GPE=0x6e <6>[ 7.774372] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.774372] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.776387] iommu: Default domain type: Translated <6>[ 7.776402] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.779265] SCSI subsystem initialized <7>[ 7.779468] libata version 3.00 loaded. <6>[ 7.779715] ACPI: bus type USB registered <6>[ 7.779915] usbcore: registered new interface driver usbfs <6>[ 7.780011] usbcore: registered new interface driver hub <6>[ 7.780136] usbcore: registered new device driver usb <6>[ 7.780513] pps_core: LinuxPPS API ver. 1 registered <6>[ 7.780522] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 7.780565] PTP clock support registered <6>[ 7.781485] EDAC MC: Ver: 3.0.0 <6>[ 7.782855] efivars: Registered efivars operations <6>[ 7.785004] NetLabel: Initializing <6>[ 7.785015] NetLabel: domain hash size = 128 <6>[ 7.785024] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 7.785165] NetLabel: unlabeled traffic allowed by default <6>[ 7.785200] mctp: management component transport protocol core <6>[ 7.785213] NET: Registered PF_MCTP protocol family <6>[ 7.785304] PCI: Using ACPI for IRQ routing <7>[ 7.803163] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.803359] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 7.803559] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.803577] e820: reserve RAM buffer [mem 0x5bd41000-0x5bffffff] <7>[ 7.803582] e820: reserve RAM buffer [mem 0x5bda2000-0x5bffffff] <7>[ 7.803587] e820: reserve RAM buffer [mem 0x60a3a000-0x63ffffff] <6>[ 7.804493] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.804493] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.804493] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.804493] vgaarb: loaded <6>[ 7.813608] clocksource: Switched to clocksource tsc-early <5>[ 7.822216] VFS: Disk quotas dquot_6.6.0 <6>[ 7.822264] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 7.824280] AppArmor: AppArmor Filesystem Enabled <6>[ 7.824623] pnp: PnP ACPI init <6>[ 7.826269] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.826294] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.827265] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.829783] system 00:03: [io 0x06a4] has been reserved <6>[ 7.829801] system 00:03: [io 0x06a0] has been reserved <4>[ 7.868208] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 7.868234] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.868492] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.868511] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.868535] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.868554] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.868573] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.868589] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.878138] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 7.879995] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.885104] pnp: PnP ACPI: found 8 devices <6>[ 7.903192] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.904027] NET: Registered PF_INET protocol family <6>[ 7.904284] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.906902] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 7.907073] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.907329] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.908452] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 7.909511] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.910228] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.911078] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.911854] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.911912] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 7.911942] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 7.911954] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 7.911960] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 7.911965] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 7.911981] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 7.911996] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 7.912011] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 7.912031] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 7.912046] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 7.912061] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 7.912084] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.912093] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 7.912104] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.912113] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.912120] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 7.912127] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.912137] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.912141] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.912149] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 7.912156] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.912172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.912177] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.912182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.912187] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 7.912192] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.912198] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 7.912203] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.912208] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 7.912212] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.912218] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.912222] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 7.912227] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.913390] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.915320] PCI: CLS 0 bytes, default 64 <6>[ 7.915423] DMAR: No RMRR found <6>[ 7.915432] DMAR: No ATSR found <6>[ 7.915436] DMAR: dmar0: Using Queued invalidation <6>[ 7.915442] DMAR: dmar1: Using Queued invalidation <6>[ 7.916378] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.917616] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.917676] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.917735] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.917817] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.917889] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.917952] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.918012] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.918076] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.918135] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.918297] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.918338] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.918405] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.918474] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.918515] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.918599] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.918641] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.918687] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.918728] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.918798] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.918840] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.918911] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.918954] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.919057] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.919104] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.919158] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.919202] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.919246] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.919327] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.934141] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.934150] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.934155] software IO TLB: mapped [mem 0x0000000056de6000-0x000000005ade6000] (64MB) <6>[ 7.937770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.937988] clocksource: Switched to clocksource tsc <6>[ 7.938123] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 7.946278] Initialise system trusted keyrings <5>[ 7.946387] Key type blacklist registered <6>[ 7.946734] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 7.959166] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 7.959305] ntfs3: Enabled Linux POSIX ACLs support <6>[ 7.959314] ntfs3: Read-only LZX/Xpress compression included <5>[ 7.960991] integrity: Platform Keyring initialized <5>[ 7.961020] integrity: Machine keyring initialized <6>[ 7.969260] xor: automatically using best checksumming function avx <5>[ 7.969274] Key type asymmetric registered <5>[ 7.969288] Asymmetric key parser 'x509' registered <6>[ 7.969434] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 7.969799] io scheduler mq-deadline registered <6>[ 7.973550] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 7.976033] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.978173] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.979964] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.982414] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.982863] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.983243] ACPI: button: Lid Switch [LID0] <6>[ 7.983615] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.983856] ACPI: button: Sleep Button [SLPB] <6>[ 7.984168] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.984393] ACPI: button: Power Button [PWRB] <6>[ 8.106801] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 8.106817] ACPI: thermal: Thermal Zone [TZ00] (43 C) <6>[ 8.108545] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 8.108572] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 8.110358] ACPI: battery: Slot [BAT0] (battery present) <6>[ 8.132222] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 8.150907] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 8.153559] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 8.176822] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 8.179366] hpet_acpi_add: no address or irqs in _CRS <6>[ 8.179499] Linux agpgart interface v0.103 <6>[ 8.208195] ACPI: bus type drm_connector registered <7>[ 8.209883] initcall simpledrm_platform_driver_init blacklisted <6>[ 8.241238] loop: module loaded <6>[ 8.293538] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 8.408611] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 8.511315] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 8.640188] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 8.782119] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 8.876032] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 8.974166] Key type psk registered <6>[ 8.976194] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 8.977589] tun: Universal TUN/TAP device driver, 1.6 <6>[ 8.977672] nvme nvme0: pci function 0000:01:00.0 <6>[ 8.978856] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.978988] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 8.981045] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.983181] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.983210] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 8.983232] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.983674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.983698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.983711] usb usb1: Product: xHCI Host Controller <6>[ 8.983720] usb usb1: Manufacturer: Linux 6.18.0-CI_DRM_17659-g3adb3f4aa5a8+ xhci-hcd <6>[ 8.983733] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 8.985851] hub 1-0:1.0: USB hub found <6>[ 8.985987] hub 1-0:1.0: 1 port detected <6>[ 8.990547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.990565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.990578] usb usb2: Product: xHCI Host Controller <6>[ 8.990587] usb usb2: Manufacturer: Linux 6.18.0-CI_DRM_17659-g3adb3f4aa5a8+ xhci-hcd <6>[ 8.990600] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 8.991496] hub 2-0:1.0: USB hub found <6>[ 8.991570] hub 2-0:1.0: 4 ports detected <6>[ 9.047740] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.047805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 9.050155] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 9.053386] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 9.053425] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 9.053474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 9.053511] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 9.053921] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 9.053945] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.053962] usb usb3: Product: xHCI Host Controller <6>[ 9.053975] usb usb3: Manufacturer: Linux 6.18.0-CI_DRM_17659-g3adb3f4aa5a8+ xhci-hcd <6>[ 9.053992] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 9.055658] hub 3-0:1.0: USB hub found <6>[ 9.055752] hub 3-0:1.0: 12 ports detected <6>[ 9.088809] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 9.099984] nvme0n1: p1 p2 <6>[ 9.108591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 9.108613] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 9.108627] usb usb4: Product: xHCI Host Controller <6>[ 9.108637] usb usb4: Manufacturer: Linux 6.18.0-CI_DRM_17659-g3adb3f4aa5a8+ xhci-hcd <6>[ 9.108650] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 9.109936] hub 4-0:1.0: USB hub found <6>[ 9.109997] hub 4-0:1.0: 2 ports detected <6>[ 9.116307] usbcore: registered new interface driver usb-storage <6>[ 9.116538] usbcore: registered new interface driver usbserial_generic <6>[ 9.116634] usbserial: USB Serial support registered for generic <6>[ 9.116731] usbcore: registered new interface driver ftdi_sio <6>[ 9.116778] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 9.116869] usbcore: registered new interface driver pl2303 <6>[ 9.116916] usbserial: USB Serial support registered for pl2303 <6>[ 9.117104] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 9.117116] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 9.818465] i8042: Can't read CTR while initializing i8042 <3>[ 9.818478] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.819114] mousedev: PS/2 mouse device common for all mice <6>[ 9.820042] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.821443] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.821602] rtc_cmos rtc_cmos: setting system clock to 2025-12-11T05:02:32 UTC (1765429352) <6>[ 9.821777] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.821824] i2c_dev: i2c /dev entries driver <6>[ 9.826390] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.826399] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 9.826406] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.826429] device-mapper: uevent: version 1.0.3 <6>[ 9.826687] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.826699] intel_pstate: Intel P-state driver initializing <6>[ 9.832945] intel_pstate: HWP enabled <6>[ 9.832954] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.832959] sdhci: Copyright(c) Pierre Ossman <6>[ 9.833122] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.836715] drop_monitor: Initializing network drop monitor service <6>[ 9.836939] NET: Registered PF_INET6 protocol family <6>[ 9.838260] Segment Routing with IPv6 <6>[ 9.838310] In-situ OAM (IOAM) with IPv6 <6>[ 9.838587] NET: Registered PF_PACKET protocol family <5>[ 9.838803] Key type dns_resolver registered <4>[ 9.851918] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.853300] microcode: Current revision: 0x0000001c <6>[ 9.855018] IPI shorthand broadcast: enabled <6>[ 9.869898] sched_clock: Marking stable (9860002436, 9022766)->(9964667379, -95642177) <6>[ 9.872756] registered taskstats version 1 <5>[ 9.877369] Loading compiled-in X.509 certificates <6>[ 9.925877] Demotion targets for Node 0: null <6>[ 9.926227] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 9.926283] kmemleak: Automatic memory scanning thread started <5>[ 9.926493] Key type .fscrypt registered <5>[ 9.926498] Key type fscrypt-provisioning registered <6>[ 9.929769] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.929897] Key type trusted registered <5>[ 9.935106] Key type encrypted registered <6>[ 9.935112] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 9.935352] Loading compiled-in module X.509 certificates <5>[ 9.936048] Loaded X.509 cert 'Build time autogenerated kernel key: b6295e7ca822231f12466d1f4538cb48652959e0' <6>[ 9.936059] ima: Allocated hash algorithm: sha256 <6>[ 9.976994] ima: No architecture policies found <6>[ 9.977144] evm: Initialising EVM extended attributes: <6>[ 9.977151] evm: security.selinux <6>[ 9.977155] evm: security.SMACK64 <6>[ 9.977160] evm: security.SMACK64EXEC <6>[ 9.977165] evm: security.SMACK64TRANSMUTE <6>[ 9.977170] evm: security.SMACK64MMAP <6>[ 9.977174] evm: security.apparmor <6>[ 9.977179] evm: security.ima <6>[ 9.977183] evm: security.capability <6>[ 9.977187] evm: HMAC attrs: 0x1 <6>[ 9.979780] PM: Magic number: 5:353:11 <6>[ 9.979906] acpi SPI1015:00: hash matches <6>[ 9.979997] memory memory55: hash matches <6>[ 9.980064] netconsole: network logging started <6>[ 9.980800] RAS: Correctable Errors collector initialized. <6>[ 9.981039] clk: Disabling unused clocks <6>[ 9.981050] PM: genpd: Disabling unused power domains <4>[ 9.982516] check access for rdinit=/init failed: -2, ignoring <6>[ 9.982523] md: Waiting for all devices to be available before autodetect <6>[ 9.982528] md: If you don't use raid, use raid=noautodetect <6>[ 9.982533] md: Autodetecting RAID arrays. <6>[ 9.982540] md: autorun ... <6>[ 9.982543] md: ... autorun DONE. <6>[ 10.037705] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 10.051558] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 10.051601] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 10.051621] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 10.051634] usb 4-1: Manufacturer: Realtek <6>[ 10.051646] usb 4-1: SerialNumber: 000001 <6>[ 10.058843] EXT4-fs (nvme0n1p2): mounted filesystem 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 ro with ordered data mode. Quota mode: none. <6>[ 10.058910] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 10.059821] devtmpfs: mounted <6>[ 10.076976] Freeing unused decrypted memory: 2036K <6>[ 10.078645] Freeing unused kernel image (initmem) memory: 5704K <6>[ 10.078672] Write protecting the kernel read-only data: 36864k <6>[ 10.080273] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 10.081115] Freeing unused kernel image (rodata/data gap) memory: 720K <6>[ 10.087941] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 10.109109] Run /sbin/init as init process <7>[ 10.109116] with arguments: <7>[ 10.109117] /sbin/init <7>[ 10.109118] with environment: <7>[ 10.109118] HOME=/ <7>[ 10.109119] TERM=linux <7>[ 10.188351] systemd[1]: Inserted module 'autofs4' <7>[ 10.228221] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 10.228249] systemd[1]: Detected architecture x86-64. <7>[ 10.230221] systemd[1]: Hostname set to . <7>[ 10.501089] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.535312] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.537401] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.539163] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.539428] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.540133] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.540263] systemd[1]: Expecting device dev-disk-by\x2duuid-BC00\x2dEEBB.device - /dev/disk/by-uuid/BC00-EEBB... <7>[ 10.540354] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.540444] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.540520] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.540594] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.540672] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.540931] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.541359] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.541670] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.542035] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.542370] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.542605] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.542934] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.543308] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.543625] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.543839] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.544420] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.544723] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.548716] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.553063] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.557731] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.562599] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.571709] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.575222] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.581020] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.583998] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.586664] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.588877] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.592428] systemd-journald[312]: Collecting audit messages is disabled. <7>[ 10.592879] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.599108] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.602818] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.605835] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.608279] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.608449] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.612427] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 10.614731] pstore: Using crash dump compression: deflate <6>[ 10.616496] pstore: Registered efi_pstore as persistent store backend <7>[ 10.618012] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.618156] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.618226] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.621808] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 10.622231] fuse: init (API version 7.45) <7>[ 10.628087] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.762896] EXT4-fs (nvme0n1p2): re-mounted 50f9c5b5-0801-45a5-b2f8-ae8d17396a16 r/w. <6>[ 10.796714] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:952238080k SS <7>[ 10.810967] systemd-journald[312]: Received client request to flush runtime journal. <7>[ 10.834483] systemd-journald[312]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.834498] systemd-journald[312]: Rotating system journal. <4>[ 11.569903] nvme nvme0: using unchecked data buffer <6>[ 11.715078] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.754497] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 11.758035] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.767490] intel-hid INTC1077:00: platform supports 5 button array <6>[ 11.768127] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 11.995439] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 11.995949] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <5>[ 12.061725] audit: type=1400 audit(1765429354.738:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=588 comm="apparmor_parser" <5>[ 12.061966] audit: type=1400 audit(1765429354.738:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=589 comm="apparmor_parser" <5>[ 12.062417] audit: type=1400 audit(1765429354.739:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=587 comm="apparmor_parser" <5>[ 12.062764] audit: type=1400 audit(1765429354.739:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=591 comm="apparmor_parser" <5>[ 12.063621] audit: type=1400 audit(1765429354.740:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=590 comm="apparmor_parser" <5>[ 12.066897] audit: type=1400 audit(1765429354.743:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=592 comm="apparmor_parser" <4>[ 12.068407] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 12.068443] caller igen6_probe+0x190/0x9e0 [igen6_edac] mapping multiple BARs <5>[ 12.070723] audit: type=1400 audit(1765429354.747:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=593 comm="apparmor_parser" <5>[ 12.075711] audit: type=1400 audit(1765429354.752:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=594 comm="apparmor_parser" <5>[ 12.078568] audit: type=1400 audit(1765429354.755:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=595 comm="apparmor_parser" <5>[ 12.079143] audit: type=1400 audit(1765429354.756:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=596 comm="apparmor_parser" <6>[ 12.101781] ACPI: bus type thunderbolt registered <6>[ 12.123832] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 12.140618] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 12.144494] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 12.144498] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 12.146003] pci 0000:00:08.0: Setting to D3hot <6>[ 12.153927] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 12.154999] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 12.156222] EDAC igen6: v2.5.1 <6>[ 12.158067] pci 0000:00:05.0: Setting to D3hot <6>[ 12.163592] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 12.163600] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 12.170536] intel_pmc_core INT33A1:00: initialized <6>[ 12.188516] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 12.188648] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 12.189549] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 12.209338] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 12.279702] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 12.299858] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 12.315891] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 12.317936] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer <6>[ 12.317940] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 12.317942] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 12.317943] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 12.324088] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 12.329410] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 12.372375] usbcore: registered new device driver r8152-cfgselector <6>[ 12.377956] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 12.393690] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 12.405061] intel_rapl_common: Found RAPL domain package <6>[ 12.534099] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.557288] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.560141] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.626824] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 12.626831] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 12.626960] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 12.637479] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.675299] intel_rapl_msr: PL4 support detected. <6>[ 12.683265] intel_rapl_common: Found RAPL domain package <6>[ 12.683271] intel_rapl_common: Found RAPL domain core <6>[ 12.683527] intel_rapl_common: Found RAPL domain psys <6>[ 12.690997] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 12.694965] usbcore: registered new interface driver r8152 <6>[ 12.695459] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.745233] usbcore: registered new interface driver cdc_ether <4>[ 12.747170] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 12.774953] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.785824] usbcore: registered new interface driver r8153_ecm <5>[ 12.791492] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.791533] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.794700] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.810762] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 12.816624] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.827825] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.833645] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.842415] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 12.872260] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.879520] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.881481] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.882421] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.883805] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.885648] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.885982] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.887337] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.888021] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.890351] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.894541] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.896954] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.900868] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.903207] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.906043] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.906336] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.909210] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.909358] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.912492] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.912658] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.915320] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.915364] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.919332] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.981964] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.985200] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.988198] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.993000] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.997934] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.001422] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.006411] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.012142] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.014136] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.018550] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.022292] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.025242] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.029029] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.031976] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.035631] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.039349] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.042505] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.045736] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.049770] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.057971] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.070323] r8152 4-1:1.0 enxe2015072f451: renamed from eth1 <4>[ 13.156464] block nvme0n1: No UUID available providing old NGUID <6>[ 13.267629] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 13.330696] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.489545] loop0: detected capacity change from 0 to 8 <6>[ 13.688655] Consider using thermal netlink events interface <6>[ 15.633523] r8152 4-1:1.0 enxe2015072f451: carrier on <3>[ 21.812952] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 23.674538] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.676096] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 32.534209] systemd-journald[312]: /var/log/journal/09bbc4ccef2141a7b5ecf81299acfffb/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 49.342738] [IGT] i915_module_load: executing <4>[ 49.342787] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.377524] [IGT] i915_module_load: starting subtest load <4>[ 49.955862] ********************************************************** <4>[ 49.955863] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.955863] ** ** <4>[ 49.955864] ** trace_printk() being used. Allocating extra memory. ** <4>[ 49.955864] ** ** <4>[ 49.955865] ** This means that this is a DEBUG kernel and it is ** <4>[ 49.955866] ** unsafe for production use. ** <4>[ 49.955866] ** ** <4>[ 49.955867] ** If you see this message and you are not debugging ** <4>[ 49.955867] ** the kernel, report this immediately to your vendor! ** <4>[ 49.955868] ** ** <4>[ 49.955869] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.955869] ********************************************************** <5>[ 49.990769] Setting dangerous option force_probe - tainting kernel <6>[ 49.995434] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 49.996724] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.996993] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 49.997177] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 49.997357] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 49.997594] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 49.997780] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 49.997995] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.998249] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 49.998517] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 49.998717] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 49.999345] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 49.999517] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 50.000068] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 50.000228] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 50.000731] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 50.001043] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 50.001192] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 50.001340] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 50.001474] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 50.001848] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 50.002223] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 50.002232] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 50.002438] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 50.002995] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 50.003318] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b1995fff], io: n/a <7>[ 50.003466] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 50.003861] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e04018 <7>[ 50.004095] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 50.004281] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 50.004438] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 50.004594] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 50.004741] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 50.004906] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 50.005059] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 50.005237] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 50.005411] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 50.005573] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 50.005741] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 50.005927] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 50.006097] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 50.006272] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 50.006450] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 50.006609] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.006764] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.006920] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.007076] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 50.007244] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.007400] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.007554] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.007709] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.007871] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.008025] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.008188] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.008346] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.008499] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.008651] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.008810] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.008989] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.009155] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.009307] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.009458] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.009609] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 50.009762] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 50.009914] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.010075] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 50.010794] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 50.010968] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 50.011142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 50.011322] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 50.011489] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 50.011644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 50.011801] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 50.011953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 50.012129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 50.012300] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 50.012457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 50.012610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 50.012770] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 50.012923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 50.013093] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 50.013254] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 50.013409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 50.013561] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 50.013747] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 50.013897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.014064] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 50.014217] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.014369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 50.014522] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 50.014673] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.014825] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.014987] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.015138] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.015299] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.015452] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.015612] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 50.015796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.016025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 50.016233] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.016488] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 50.016744] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 50.016950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 50.017111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 50.017271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 50.017487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 50.017661] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 50.017682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 50.017877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 50.018048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 50.018226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 50.018854] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 50.019758] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 50.021074] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 50.021260] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 50.021422] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 50.021584] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 50.021755] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 50.021908] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 50.022065] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 50.022221] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 50.022377] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 50.022580] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 50.022809] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 50.022984] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 50.023154] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 50.023293] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 50.023523] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 50.023773] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 50.023987] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 50.024208] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 50.024431] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 50.024700] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 50.024889] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 50.025141] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.025365] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 50.025607] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.025777] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 50.025932] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.026085] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 50.026241] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.026396] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 50.026579] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 50.026759] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 50.026931] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 50.027109] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 50.027298] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 50.027465] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 50.027638] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.027790] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 50.027971] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.028133] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 50.028305] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 50.028476] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 50.028455] i915 0000:00:02.0: [drm:intel_crtc_init [i915]] 4 display pipes available. <7>[ 50.028637] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.028794] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 50.028954] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.029111] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 50.029272] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 50.029425] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 50.029601] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 50.029754] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 50.029908] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.030073] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 50.035970] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.036201] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 50.036442] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 50.038018] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:505:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.038524] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:505:DDI A/PHY A] <7>[ 50.038762] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 50.038944] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <6>[ 50.039070] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 50.039118] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 50.039307] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.039495] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 50.039677] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.039852] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 50.040011] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.040184] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.040392] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:505:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.040648] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.040803] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.040952] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.041105] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.041254] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.041556] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.041899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.043202] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.043499] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.044774] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 50.045152] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 50.045729] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 50.046494] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 50.047137] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 50.048425] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.054628] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.054637] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.054642] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.054696] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:506:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.055158] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:506:eDP-1] Performing OUI wait (0 ms) <7>[ 50.055642] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:506:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.055822] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:506:eDP-1] DRRS type: none <7>[ 50.056067] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:506:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.056274] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:506:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.056487] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.056643] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.056794] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.056959] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.057117] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 50.057386] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.057685] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:514:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 50.057858] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:514:DDI B/PHY B] <7>[ 50.058345] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:514:DDI B/PHY B] <7>[ 50.058492] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:514:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 50.058926] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:532:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.059211] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.059504] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:532:DDI TC1/PHY TC1] <7>[ 50.059834] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.060079] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 50.060435] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.060620] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:541:DDI TC2/PHY TC2] <7>[ 50.060795] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:541:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 50.061044] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:545:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.061269] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.061522] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:545:DDI TC3/PHY TC3] <7>[ 50.061862] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:554:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 50.062100] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 50.062342] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:554:DDI TC4/PHY TC4] <7>[ 50.063226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] hw state readout: enabled <7>[ 50.063565] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] hw state readout: disabled <7>[ 50.063894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] hw state readout: disabled <7>[ 50.064212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] hw state readout: disabled <7>[ 50.064384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 50.064555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 50.064748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 50.064940] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 50.065105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 50.065264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 50.065467] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 50.065658] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 50.065856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 50.066025] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 50.066181] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 50.066349] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 50.066505] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 50.066675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 50.066845] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 50.067012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 50.067167] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 50.067329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 50.067489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D <7>[ 50.067660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D <7>[ 50.067828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D <7>[ 50.067983] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D <7>[ 50.068137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D <7>[ 50.068298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] hw state readout: disabled, pipe D <7>[ 50.069200] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.069429] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:505:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.069628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:514:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 50.069813] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:516:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.069964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:517:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.070112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:518:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.070267] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:519:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.070488] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.070672] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:532:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.070824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:534:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.070970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:535:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.071116] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:536:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.071270] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:537:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.071457] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.071611] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:541:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.071778] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.071930] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:545:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.072079] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:547:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.072235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:548:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.072383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:549:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.072531] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:550:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.072691] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 50.072840] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:554:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 50.072989] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:556:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.073145] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:557:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.073297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:558:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.073460] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:559:DP-MST D] hw state readout: disabled, pipe D <7>[ 50.074272] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 50.074451] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 50.074632] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.074791] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 50.074948] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.075116] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.075278] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.075439] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 50.075695] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:506:eDP-1] hw state readout: enabled <7>[ 50.075872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:515:DP-1] hw state readout: disabled <7>[ 50.076047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:527:HDMI-A-1] hw state readout: disabled <7>[ 50.076213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:533:DP-2] hw state readout: disabled <7>[ 50.076378] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:542:HDMI-A-2] hw state readout: disabled <7>[ 50.076541] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:546:DP-3] hw state readout: disabled <7>[ 50.076705] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:555:DP-4] hw state readout: disabled <7>[ 50.076944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 50.077107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 50.077257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 50.077404] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 50.077549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 50.077693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 50.077839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:149:pipe A] min_cdclk 256910 kHz <7>[ 50.077990] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 50.078137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 50.078283] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 50.078427] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 50.078570] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 50.078713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 50.078856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:267:pipe B] min_cdclk 0 kHz <7>[ 50.079041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 50.079190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 50.079339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 50.079484] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 50.079628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 50.079771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 50.079941] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:385:pipe C] min_cdclk 0 kHz <7>[ 50.080086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:387:plane 1D] min_cdclk 0 kHz <7>[ 50.080231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:417:plane 2D] min_cdclk 0 kHz <7>[ 50.080375] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:447:plane 3D] min_cdclk 0 kHz <7>[ 50.080518] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:477:plane 4D] min_cdclk 0 kHz <7>[ 50.080661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:487:plane 5D] min_cdclk 0 kHz <7>[ 50.080803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:497:cursor D] min_cdclk 0 kHz <7>[ 50.080956] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:503:pipe D] min_cdclk 0 kHz <7>[ 50.081305] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:149:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.081458] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.081613] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.081764] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.081924] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 50.082091] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 50.082253] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 50.082408] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 50.082729] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.083091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [setup_hw_state] <7>[ 50.083258] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.083419] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.083576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.083735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.083906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.084063] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.084221] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 50.084376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.084531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.084685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.084845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.084997] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.085150] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.085302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.085456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 50.085611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 50.085775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 50.085932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.086086] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.086238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.086390] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.086541] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.086697] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.086851] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.087003] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.087154] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.087304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.087454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.087603] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.087772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.087928] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.088082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.088233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.088384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.088536] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.088696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.088845] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.088994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.089142] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.089290] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.089441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.089597] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.089748] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.089897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.090057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.090205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.090352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.090500] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.090655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.090803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.090950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [setup_hw_state] <7>[ 50.091098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [setup_hw_state] <7>[ 50.091246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [setup_hw_state] <7>[ 50.091393] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 50.091767] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:149:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.091931] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 50.092103] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 50.092626] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 50.097263] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 50.103413] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 50.103587] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 50.103741] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 50.103892] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 50.104051] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 50.104215] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 50.104428] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 50.106909] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 50.107102] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 50.107270] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 50.108146] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 50.108314] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 50.108777] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 50.108940] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 50.110194] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.110385] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 50.110571] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 50.131033] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 50.131240] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 50.131446] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 50.131604] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 50.131761] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 50.131916] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 50.132072] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 50.132226] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 50.132392] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 50.132545] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 50.132698] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 50.132850] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 50.133003] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 50.133155] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 50.134114] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 50.144008] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1750MHz -> 2100MHz vs 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.144937] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 50.146581] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 50.146583] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 50.147041] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 50.147357] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.148761] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 50.154876] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 50.155071] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 50.156026] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 50.156207] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 50.157091] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 50.157261] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 50.157922] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 50.158086] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 50.158889] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 50.159048] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 50.160817] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 50.161021] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 50.161204] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 50.183008] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 50.183200] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 50.183368] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 50.183531] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 50.183692] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 50.183924] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 50.184077] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 50.184229] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 50.184379] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 50.184527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 50.184685] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 50.184841] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 50.184990] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 50.185141] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 50.185294] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 50.189256] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 50.189453] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 50.190065] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 50.190067] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 50.203196] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 50.203478] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 50.211922] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 50.212087] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 50.212977] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 50.212978] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 50.213162] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 50.213366] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 50.214434] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 50.220532] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 50.220814] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 50.221006] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 50.221188] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 50.221365] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 50.221564] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 50.221804] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 50.223526] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 50.224865] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7>[ 50.225043] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7>[ 50.225212] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7>[ 50.225372] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7>[ 50.225713] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7>[ 50.225873] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 0: start 0x98008 <7>[ 50.226029] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 1: start 0x98108 <7>[ 50.226184] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 2: start 0x98208 <7>[ 50.226339] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 3: start 0x98308 <7>[ 50.226525] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:267:pipe B] FQ 4: start 0x983c8 <7>[ 50.226677] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 0: start 0x52008 <7>[ 50.226866] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 1: start 0x52108 <7>[ 50.227067] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 2: start 0x52208 <7>[ 50.227225] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 3: start 0x52308 <7>[ 50.227399] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:385:pipe C] FQ 4: start 0x523c8 <7>[ 50.227552] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 0: start 0x59008 <7>[ 50.227703] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 1: start 0x59108 <7>[ 50.227854] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 2: start 0x59208 <7>[ 50.228006] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 3: start 0x59308 <7>[ 50.228156] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:503:pipe D] FQ 4: start 0x593c8 <7>[ 50.228673] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.228841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.229009] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 50.229163] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 50.229392] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 50.229604] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.229782] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 50.229943] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 50.230146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:267:pipe B] enable: no [fastset] <7>[ 50.230335] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:385:pipe C] enable: no [fastset] <7>[ 50.230504] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:503:pipe D] enable: no [fastset] <7>[ 50.232527] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 50.232705] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 50.232925] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.233097] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 50.239787] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:267:pipe B] <7>[ 50.240424] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:385:pipe C] <7>[ 50.240841] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:503:pipe D] <7>[ 50.247015] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:eDP-1] adding connector to sysfs <7>[ 50.249894] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:506:eDP-1] backlight device intel_backlight registered <7>[ 50.250097] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.250286] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:506:eDP-1] Panel prepare <7>[ 50.250708] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.252102] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:eDP-1] generating connector hotplug event <7>[ 50.252436] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:515:DP-1] adding connector to sysfs <7>[ 50.253055] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 50.254349] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:515:DP-1] generating connector hotplug event <7>[ 50.254388] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:527:HDMI-A-1] adding connector to sysfs <7>[ 50.254731] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:527:HDMI-A-1] generating connector hotplug event <7>[ 50.254772] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:DP-2] adding connector to sysfs <7>[ 50.255174] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 50.255993] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:DP-2] generating connector hotplug event <7>[ 50.256027] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:HDMI-A-2] adding connector to sysfs <7>[ 50.256331] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:HDMI-A-2] generating connector hotplug event <7>[ 50.256362] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:546:DP-3] adding connector to sysfs <7>[ 50.256767] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.257432] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:546:DP-3] generating connector hotplug event <7>[ 50.257482] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:555:DP-4] adding connector to sysfs <7>[ 50.257834] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 50.258568] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:555:DP-4] generating connector hotplug event <6>[ 50.258596] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 50.261109] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 50.273232] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.276598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.278131] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.278370] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 50.278769] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.278774] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 50.280248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.280543] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 50.281050] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 50.281303] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 50.281799] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 50.282244] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 50.282764] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:149:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 50.283227] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 50.283449] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:267:pipe B] not active, skipping <7>[ 50.283809] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:385:pipe C] not active, skipping <7>[ 50.284048] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:503:pipe D] not active, skipping <7>[ 50.284358] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <7>[ 50.284522] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:515:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.284714] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.284774] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 50.286711] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.288840] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:527:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.289021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.289606] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.289889] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:533:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.290075] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.290435] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.294648] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:542:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.294844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.295106] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.295359] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:546:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.295528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.295802] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.296051] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:555:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.296233] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.296504] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <6>[ 50.296470] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 50.296519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 50.297685] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.298725] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.299328] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.299597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.299836] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.300224] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.300230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 50.300234] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 50.300257] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 50.300437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.300628] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.301488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] status updated from unknown to connected <7>[ 50.301680] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.302005] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 50.302010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.302015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 50.302018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 50.302357] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.302897] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.302922] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.306919] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 50.306930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 50.306936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 50.311227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 50.311241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 50.311245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 50.311673] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 50.311748] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 50.311678] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 50.311865] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:506:eDP-1] set backlight level = 13892 <7>[ 50.312246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 50.316491] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 50.316498] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 50.316502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 50.316839] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 50.316845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 50.316850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 50.317187] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 50.317190] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 50.317194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 50.317197] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 50.317199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 50.317201] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 50.317203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 50.317205] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 50.317362] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.317420] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 50.317422] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.317433] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.317594] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.317669] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.317916] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.319297] fbcon: i915drmfb (fb0) is primary device <7>[ 50.320660] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:506:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.320893] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:505:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 50.321083] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.321272] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.321448] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:505:DDI A/PHY A] [CRTC:149:pipe A] <7>[ 50.321772] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.321959] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.322136] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.322316] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.322487] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.322679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.322849] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.323013] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.323192] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.323362] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.323526] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.323716] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.323894] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.324075] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.324252] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.324419] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.324592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.324768] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.324947] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.325119] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.325290] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.325475] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.325664] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.325825] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.325993] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.326169] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.326333] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.326512] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:149:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.326682] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.326858] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:149:pipe A] releasing DPLL 0 <7>[ 50.327312] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.327509] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.327691] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.327875] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.328055] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.328248] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.328432] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.328602] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.328763] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.328918] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.329069] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.329217] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.329374] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.329540] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.329720] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.329895] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.330051] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.330203] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.330365] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.330522] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.330677] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.330829] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.330991] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.331148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.331314] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.331559] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.331768] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.331970] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.332133] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.332352] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:149:pipe A] allocated DPLL 0 <7>[ 50.332551] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:149:pipe A] reserving DPLL 0 <7>[ 50.332755] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:149:pipe A] enable: yes [modeset] <7>[ 50.332953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.333137] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.333314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.333489] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.333667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.333856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.334039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.334223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.334424] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.334608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.334778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.334944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.335129] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.335323] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.335494] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.335659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.335825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.335996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.336163] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.336345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.336505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.336676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.336853] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.337015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.337188] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.337354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.337520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.337688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.337842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.337995] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.338153] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.338307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.338488] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.338671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.338848] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.339004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.339176] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.339342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.339520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.339694] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.339846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.339998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.340205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.340382] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.340571] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.340767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.340952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.341174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.341354] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.341553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.341746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.341932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.342132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.342307] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.342470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.342626] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.342785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.342939] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:564] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.343113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.343274] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.343440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 50.343608] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 50.343763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 50.343918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 50.344126] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 50.350957] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 50.353653] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.353991] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.354225] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.354428] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.354597] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.354773] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.354938] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.355100] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.355261] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.355425] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.355585] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.355769] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.355929] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.356089] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.356251] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.356407] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.356565] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.356736] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.356910] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.357097] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.357281] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.357443] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.357606] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.357771] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.357957] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.358151] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.358327] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.358482] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.358643] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.358805] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.358986] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.359152] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.359309] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.359463] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.359623] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.359785] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <6>[ 50.362437] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <6>[ 50.364087] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.365198] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.365888] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.366467] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 50.383320] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1200MHz -> 1200MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.383543] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.551621] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 0 <7>[ 50.553091] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.565060] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.565211] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.565769] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.565712] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - short <7>[ 50.566176] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.618193] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.618835] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 50.619417] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.624926] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.625957] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.625971] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7>[ 50.626596] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 50.627737] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.628474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.629610] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 50.630016] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.630337] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:505:DDI A/PHY A] <7>[ 50.630626] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:514:DDI B/PHY B] <7>[ 50.630923] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:516:DP-MST A] <7>[ 50.631142] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:517:DP-MST B] <7>[ 50.631294] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:518:DP-MST C] <7>[ 50.631465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:519:DP-MST D] <7>[ 50.631630] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:532:DDI TC1/PHY TC1] <7>[ 50.631799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:534:DP-MST A] <7>[ 50.631957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:535:DP-MST B] <7>[ 50.632118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:536:DP-MST C] <7>[ 50.632278] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:537:DP-MST D] <7>[ 50.632436] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:541:DDI TC2/PHY TC2] <7>[ 50.632585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:545:DDI TC3/PHY TC3] <7>[ 50.632740] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:547:DP-MST A] <7>[ 50.632888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:548:DP-MST B] <7>[ 50.633034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:549:DP-MST C] <7>[ 50.633191] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:550:DP-MST D] <7>[ 50.633366] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:554:DDI TC4/PHY TC4] <7>[ 50.633512] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:556:DP-MST A] <7>[ 50.633656] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:557:DP-MST B] <7>[ 50.633798] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:558:DP-MST C] <7>[ 50.633939] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:559:DP-MST D] <7>[ 50.634172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.635225] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7>[ 50.635419] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.637043] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.637259] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining) <7>[ 50.844825] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 51.120635] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.208886] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.209691] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.210480] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.241665] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 51.242382] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:505:DDI A/PHY A] - long <7>[ 51.242962] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.243548] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:505:DDI A/PHY A] <7>[ 51.327223] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.327228] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.327227] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.327413] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.414005] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.415353] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.416242] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.419936] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.421011] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.421723] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.422905] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.423688] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.424756] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.424905] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.426253] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.426398] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:506:eDP-1][ENCODER:505:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.427032] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.427330] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.427488] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.427708] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:506:eDP-1] set backlight PWM = 13892 <7>[ 51.438477] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.440233] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.440497] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:149:pipe A] <7>[ 51.442052] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.443432] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <6>[ 51.444367] Console: switching to colour frame buffer device 180x56 <6>[ 51.462247] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.462334] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.462347] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.462255] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.462508] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.462753] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.462896] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 51.462965] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.462973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.463212] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.463389] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.463592] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.463898] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.464092] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.464230] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.464294] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.464571] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.464767] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.464778] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.464998] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.464998] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.465234] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.465237] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.465596] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.465602] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 51.465621] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 51.465480] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.465665] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 51.465842] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.466019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.466188] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.466309] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.466442] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.466726] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.466934] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.467161] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.467345] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 51.467355] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.467359] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 51.467363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 51.467358] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.468530] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.469204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.469901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.470288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.471073] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.471319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.471629] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 51.471633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 51.471578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.471636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 51.471822] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.472044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.472262] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.472519] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.472740] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.472952] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.473112] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.473239] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.473368] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.473518] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.473648] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.473773] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.473899] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.474024] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.474148] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.474273] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.474400] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.474538] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.474674] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.474797] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.474920] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.475044] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.475166] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.475289] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.475426] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.475559] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.475682] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.475772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 51.475775] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 51.475777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 51.475803] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.475926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.476049] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.476172] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.476296] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.476313] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.476436] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.476580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 51.476584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 51.476577] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.476586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 51.476699] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.476821] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.476943] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.476925] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.477064] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.477188] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.477313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.477459] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.477586] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.477707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.477829] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.477949] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.478070] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.478191] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.478322] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.478458] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.478585] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.478711] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.478837] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.478962] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.479087] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.479214] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.479381] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.479514] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.479638] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.479763] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.479887] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.480009] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.480134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.480260] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.480406] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.480541] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.480667] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <6>[ 51.480792] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.480792] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.480793] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.481156] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 51.481160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 51.481162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 51.481440] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.481681] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 51.481684] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 51.481687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 51.481929] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.482141] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 51.482144] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 51.482146] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 51.482148] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 51.482150] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 51.482151] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 51.482153] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 51.482155] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 51.482276] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.482293] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 51.482295] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.482320] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.485538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.494417] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.516360] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.516374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.516916] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] <7>[ 51.516932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:506:eDP-1] <7>[ 51.518087] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.518665] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.518895] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.519179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.519437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.519441] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD monitor <7>[ 51.519446] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:506:eDP-1] ELD size 20, SAD count 0 <7>[ 51.519462] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] VRR capable: no <7>[ 51.519598] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.519732] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:506:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.520569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:eDP-1] probed modes: <7>[ 51.520576] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.520580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] <7>[ 51.520582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:515:DP-1] <7>[ 51.524695] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:515:DP-1] disconnected <7>[ 51.524700] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] <7>[ 51.524703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:527:HDMI-A-1] <7>[ 51.528846] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:527:HDMI-A-1] disconnected <7>[ 51.528850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] <7>[ 51.528853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:533:DP-2] <7>[ 51.529257] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected <7>[ 51.529262] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] <7>[ 51.529266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:542:HDMI-A-2] <7>[ 51.533572] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:HDMI-A-2] disconnected <7>[ 51.533579] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] <7>[ 51.533581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:546:DP-3] <7>[ 51.533845] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:546:DP-3] disconnected <7>[ 51.533850] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] <7>[ 51.533852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:555:DP-4] <7>[ 51.534182] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:555:DP-4] disconnected <7>[ 51.534187] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] enabled? yes <7>[ 51.534190] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:515:DP-1] enabled? no <7>[ 51.534192] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:527:HDMI-A-1] enabled? no <7>[ 51.534194] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no <7>[ 51.534197] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:HDMI-A-2] enabled? no <7>[ 51.534199] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:546:DP-3] enabled? no <7>[ 51.534201] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:555:DP-4] enabled? no <7>[ 51.534312] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.534346] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:eDP-1] found preferred mode: 2880x1800 <7>[ 51.534349] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.534374] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.538943] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.553338] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.560987] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.595100] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.595257] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.598409] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.627546] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.627625] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.628061] [IGT] i915_module_load: exiting, ret=0 <7>[ 52.513001] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.513036] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.513752] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.574977] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.021200] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.022078] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:505:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 54.022642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 54.023452] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 54.023877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02