Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.39 seconds
Igt-Version 
IGT-Version: 2.2-gb44ab3f8f (x86_64) (Linux: 6.18.0-CI_DRM_17632-g2d16d4e1aef3+ x86_64)
Out 
Using IGT_SRANDOM=1764807936 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.390s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.390s)
Dmesg
<4> [232.418548] aer_ratelimit: 18 callbacks suppressed
<6> [232.418558] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.418574] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.418579] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.418585] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<6> [232.437990] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.438009] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.438013] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.438018] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<6> [232.440278] pcieport 0000:00:1c.4: AER: Multiple Correctable error message received from 0000:00:1c.4
<4> [232.440293] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.440298] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000041/00002000
<4> [232.440305] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<4> [232.440310] pcieport 0000:00:1c.4: [ 6] BadTLP
<6> [232.455213] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.455232] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.455238] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.455243] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<6> [232.478600] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.478618] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.478623] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.478628] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<6> [232.483224] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.483242] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.483248] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.483253] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<6> [232.486166] Console: switching to colour dummy device 80x25
<6> [232.487044] [IGT] kms_force_connector_basic: executing
<6> [232.493987] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.494006] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.494013] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.494020] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<7> [232.495235] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [232.497511] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [232.498528] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [232.500868] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [232.500893] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.500911] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.505752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.505902] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.505918] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<6> [232.507504] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.507533] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.507540] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.507547] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<7> [232.510743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.511447] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [232.511468] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [232.511484] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<7> [232.516277] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<7> [232.516481] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [232.516499] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<6> [232.516989] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.517008] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.517014] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.517020] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<7> [232.521266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<7> [232.521351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.521365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.526153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<6> [232.527012] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [232.528080] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [232.528103] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.528118] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]
<6> [232.533800] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4
<4> [232.533837] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [232.533844] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000
<4> [232.533851] pcieport 0000:00:1c.4: [ 0] RxErr (First)
<7> [232.592976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [232.598480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.598509] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [232.598974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [232.604498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.604522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [232.605011] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from disconnected to connected
<7> [232.605057] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [232.605230] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [232.605492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:
<7> [232.605507] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [232.605520] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [232.605532] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [232.605544] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [232.605555] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [232.605708] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.605723] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.670950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [232.676454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.676482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [232.676870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [232.682172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.682201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [232.682949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:
<7> [232.682965] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [232.682977] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [232.682989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [232.683000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [232.683010] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [232.683694] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:286:HDMI-A-1] EDID override set
<7> [232.683768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.683783] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.684501] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:286:HDMI-A-1] ELD monitor IGT
<7> [232.684516] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:286:HDMI-A-1] ELD size 24, SAD count 0
<7> [232.748426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [232.753863] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [232.754154] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [232.754176] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [232.754190] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:
<7> [232.754198] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [232.754206] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [232.754213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [232.754220] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [232.754227] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [232.754234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [232.754750] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:286:HDMI-A-1] EDID override set
<7> [232.754841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.754855] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.755646] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:286:HDMI-A-1] ELD monitor IGT
<7> [232.755659] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:286:HDMI-A-1] ELD size 24, SAD count 0
<7> [232.755669] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:286:HDMI-A-1] EDID changed, epoch counter 4
<7> [232.819947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [232.825343] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [232.825701] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [232.825724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:
<7> [232.825734] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [232.825743] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [232.825752] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [232.825760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [232.825768] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [232.826131] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:286:HDMI-A-1] EDID override reset
<7> [232.826199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.826209] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.891425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2
<7> [232.896862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.896892] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [232.897345] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [232.902771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [232.902796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [232.903255] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:286:HDMI-A-1] EDID changed, epoch counter 5
<7> [232.903513] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [232.903543] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [232.904989] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:
<7> [232.905008] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [232.905020] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [232.905031] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [232.905041] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [232.905051] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [232.907040] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [232.907065] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.907082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.911899] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from connected to disconnected
<7> [232.911930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.911952] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [232.912102] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [232.912283] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.912297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.917115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<6> [232.918260] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [232.919423] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [232.921682] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:268:eDP-1] force updated from 0 to 0 or reprobing
<7> [232.921707] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]
<7> [232.921725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]
<7> [232.922388] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [232.922910] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [232.923507] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [232.924124] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.
<7> [232.924141] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor
<7> [232.924152] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0
<7> [232.924203] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no
<7> [232.924806] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [232.925353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [232.927378] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:
<7> [232.927421] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
<7> [232.927436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
<7> [232.927583] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]
<7> [232.927598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]
<7> [232.928306] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [232.928875] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [232.929435] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [232.930033] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.
<7> [232.930048] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor
<7> [232.930057] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0
<7> [232.930104] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no
<7> [232.930681] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [232.931211] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [232.932954] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:
<7> [232.932973] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
<7> [232.932986] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
<7> [232.933458] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:268:eDP-1] EDID override reset
<7> [232.933537] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]
<7> [232.933551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]
<7> [232.934183] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [232.934798] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [232.935331] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [232.936003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.
<7> [232.936018] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor
<7> [232.936026] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0
<7> [232.936071] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no
<7> [232.936617] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [232.937154] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [232.939000] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:
<7> [232.939017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
<7> [232.939033] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
<7> [232.939494] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:277:DP-1] EDID override reset
<7> [232.939567] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]
<7> [232.939580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]
<7> [232.944245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected
<7> [232.944938] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [232.944958] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.944973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.949807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.949966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.949983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.954847] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.955258] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:286:HDMI-A-1] EDID override reset
<7> [232.955324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.955339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [232.960181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [232.960945] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [232.960966] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [232.960981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<7> [232.965800] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<7> [232.965944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [232.965959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<7> [232.970739] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<7> [232.971142] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:292:HDMI-A-2] EDID override reset
<7> [232.971205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [232.971218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<7> [232.976027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<6> [232.978114] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [232.979260] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [232.987797] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [232.987817] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [232.987963] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]
<7> [232.987980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]
<7> [232.988669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [232.989242] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
<7> [232.990047] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
<7> [232.990698] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.
<7> [232.990714] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor
<7> [232.990724] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0
<7> [232.990775] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no
<7> [232.991310] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [232.991962] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [232.993809] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:
<7> [232.993829] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
<7> [232.993842] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
<7> [232.993858] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]
<7> [232.993871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]
<7> [232.998788] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected
<7> [232.998812] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]
<7> [232.998825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]
<7> [233.003635] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected
<7> [233.003660] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]
<7> [233.003673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]
<7> [233.008407] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected
<7> [233.008429] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] enabled? yes
<7> [233.008455] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:DP-1] enabled? no
<7> [233.008461] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:286:HDMI-A-1] enabled? no
<7> [233.008468] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:292:HDMI-A-2] enabled? no
<7> [233.008523] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [233.008556] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] found preferred mode: 3200x1800
<7> [233.008563] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config
<7> [233.008598] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:109:pipe A] desired mode 3200x1800 set (0,0)
<7> [233.020850] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [233.038099] Console: switching to colour frame buffer device 200x56
Created at 2025-12-05 11:30:15