igt@kms_force_connector_basic@force-connector-state on bat-jsl-1@CI_DRM

Detail	Value
Duration	0.97 seconds
Igt-Version	IGT-Version: 2.2-gb44ab3f8f (x86_64) (Linux: 6.18.0-CI_DRM_17632-g2d16d4e1aef3+ x86_64)
Out	Using IGT_SRANDOM=1764807933 for randomisation Opened device: /dev/dri/card0 Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.966s)
Err	Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.966s)
Dmesg	<6> [229.069647] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [229.069667] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [229.069674] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [229.069681] pcieport 0000:00:1c.4: [ 0] RxErr (First) <6> [229.132490] Console: switching to colour dummy device 80x25 <6> [229.133095] [IGT] kms_force_connector_basic: executing <7> [229.141037] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [229.143512] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [229.144540] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [229.147232] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [229.147492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.147523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <6> [229.152522] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [229.152546] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [229.152554] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [229.152561] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [229.152639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [229.152820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.152838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.157687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [229.158422] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing <7> [229.158441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [229.158498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [229.163271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [229.163424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [229.163440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [229.168336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [229.168423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.168437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.173188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <6> [229.173982] [IGT] kms_force_connector_basic: starting subtest force-connector-state <6> [229.178501] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [229.178518] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [229.178525] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [229.178532] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [229.193718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] <7> [229.193738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1] <7> [229.198315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected <7> [229.199486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.199507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.204281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [229.205369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [229.205385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [229.210205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [229.211753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] <7> [229.211770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1] <7> [229.212314] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [229.212851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [229.213409] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [229.214053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [229.214070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor <7> [229.214080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0 <7> [229.214127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no <7> [229.214729] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [229.215260] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [229.216926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes: <7> [229.216944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [229.216957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [229.217026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] <7> [229.217039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1] <7> [229.221729] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected <7> [229.221802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.221816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.226559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [229.226625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [229.226638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [229.231320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [229.328791] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe A] <7> [229.329216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [229.330245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [229.331222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1) <7> [229.332188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [229.333130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0) <7> [229.334062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [229.334986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [229.335928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0) <7> [229.336889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0) <7> [229.337831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0) <7> [229.338752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0) <7> [229.339679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0) <7> [229.340611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0) <7> [229.341544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [229.342439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [229.343369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0) <7> [229.344294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0) <7> [229.345214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0) <7> [229.346180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0) <7> [229.347114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0) <7> [229.348043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0) <7> [229.348964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0) <7> [229.349877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0) <7> [229.350801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0) <7> [229.351747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0) <7> [229.352675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [229.353597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [229.354507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0) <7> [229.355405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0) <7> [229.356344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0) <7> [229.357273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0) <7> [229.358204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [229.359132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [229.360043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [229.360975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [229.361908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [229.362844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0) <7> [229.363778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0) <7> [229.364700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in port_clock (expected 540000, found 0) <7> [229.365626] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] fastset requirement not met, forcing full modeset <7> [229.366569] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:109:pipe A] releasing DPLL 0 <7> [229.367613] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:109:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [229.368695] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0 <7> [229.369585] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:103:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0 <7> [229.370490] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [229.371374] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [229.372177] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [229.372985] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [229.373860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:109:pipe A] data rate 0 num active planes 0 <7> [229.374691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0 <7> [229.375531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0 <7> [229.376332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0 <7> [229.377234] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:109:pipe A] min cdclk: 180655 kHz -> 0 kHz <7> [229.378139] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz <7> [229.378900] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [229.379511] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [229.380104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0 <7> [229.380763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe A] enable: no [modeset] <7> [229.381372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [229.381998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [229.382614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <6> [229.382987] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4 <4> [229.383004] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [229.383010] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000 <4> [229.383017] pcieport 0000:00:1c.4: [ 0] RxErr (First) <7> [229.383207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [229.383826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [229.384429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:plane 6A] fb: [NOFB], visible: no <7> [229.385064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 7A] fb: [NOFB], visible: no <7> [229.385695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:103:cursor A] fb: [NOFB], visible: no <7> [229.407481] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7> [229.610768] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:268:eDP-1] set backlight PWM = 0 <7> [229.611978] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [229.629337] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turn panel power off <7> [229.630348] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power off time <7> [229.631310] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [229.637899] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [229.638815] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long <7> [229.639689] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [229.640629] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A] <7> [229.658773] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [229.659707] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long <7> [229.660577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [229.661543] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A] <7> [229.685580] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [229.686555] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long <7> [229.687452] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30 <7> [229.688482] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A] <7> [229.691527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [229.692534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A <7> [229.693556] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:109:pipe A] <7> [229.694624] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [229.695579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [229.696580] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [229.697569] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0 <7> [229.698990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI A/PHY A] <7> [229.700015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI B/PHY B] <7> [229.700983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST A] <7> [229.701885] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST B] <7> [229.702789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST C] <7> [229.703700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DDI C (TC)/PHY C] <7> [229.704597] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:268:eDP-1] <7> [229.706061] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe A] <7> [229.733462] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:187:pipe B] <7> [229.753692] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:265:pipe C] <7> [229.767075] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 2 or reprobing <7> [229.767093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.767105] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.810748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [229.811751] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [229.812614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [229.833011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [229.890038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [229.890068] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [229.890589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [229.946491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [229.946515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [229.946889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [229.947672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from disconnected to connected <7> [229.949310] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [229.950150] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [229.950430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes: <7> [229.950488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [229.950503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [229.950516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [229.950528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [229.950540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [229.950710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [229.950727] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1] <7> [229.951356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [230.016468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2 <7> [230.069852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [230.069883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [230.070274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [230.123452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [230.123510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [230.123938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [230.124561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes: <7> [230.124580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [230.124595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [230.124609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [230.124622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [230.124634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [230.125332] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 2 to 1 or reprobing <7> [230.125351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.125366] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.125915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from connected to disconnected <7> [230.125993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.126023] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [230.126711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.126731] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.127236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.127743] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [230.128261] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 1 to 0 or reprobing <7> [230.128281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.128298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.129126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [230.134093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.134253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.134273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.140125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <6> [230.141108] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS <7> [230.142406] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [230.144602] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:268:eDP-1] force updated from 0 to 0 or reprobing <7> [230.144626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] <7> [230.144644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1] <7> [230.146628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [230.147873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [230.148997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [230.149827] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turning VDD on <7> [230.150463] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power cycle (42 ms remaining) <7> [230.194853] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [230.215724] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [230.216794] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [230.217731] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [230.277559] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010 <7> [230.278531] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long <7> [230.279428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 40 <7> [230.280410] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A] <7> [230.429384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [230.430337] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [230.431245] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [230.432354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [230.432382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor <7> [230.432421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0 <7> [230.432649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no <7> [230.433573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [230.434470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [230.438879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes: <7> [230.438909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [230.438931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [230.439154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] <7> [230.439179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1] <7> [230.440226] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [230.441136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [230.442032] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [230.442970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [230.442990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor <7> [230.443003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0 <7> [230.443063] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no <7> [230.443856] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [230.444720] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <6> [230.445950] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0 <4> [230.445972] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID) <4> [230.445983] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000 <4> [230.445993] nvme 0000:02:00.0: [12] Timeout <7> [230.446949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes: <7> [230.446970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [230.446987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [230.447632] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:268:eDP-1] EDID override reset <7> [230.447761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] <7> [230.447783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1] <7> [230.448848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [230.449650] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [230.450417] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [230.451312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [230.451332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor <7> [230.451356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0 <7> [230.451410] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no <7> [230.452123] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [230.452836] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [230.456114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes: <7> [230.456137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [230.456153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [230.456785] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:277:DP-1] EDID override reset <7> [230.456868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] <7> [230.456885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1] <7> [230.461830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected <7> [230.462714] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [230.462741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.462761] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.467796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.467964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.467986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.473062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.473674] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:286:HDMI-A-1] EDID override reset <7> [230.473772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [230.473793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [230.478861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [230.479688] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing <7> [230.479712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [230.479730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [230.484724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [230.484890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [230.484908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [230.489805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [230.490216] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:292:HDMI-A-2] EDID override reset <7> [230.490280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [230.490293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [230.495102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <6> [230.497272] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [230.498697] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [230.500755] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:268:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [230.501402] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:267:DDI A/PHY A][CRTC:109:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000 <7> [230.501985] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1083930 available 2160000 <7> [230.502694] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long <7> [230.503251] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met <7> [230.503859] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [230.504458] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:267:DDI A/PHY A] [CRTC:109:pipe A] <7> [230.505001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [230.505581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [230.506144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4) <7> [230.506725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [230.507299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288) <7> [230.508223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [230.508826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [230.509389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200) <7> [230.510027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316) <7> [230.510611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200) <7> [230.511172] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316) <7> [230.511845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248) <7> [230.512522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280) <7> [230.513080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [230.513656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [230.514214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802) <7> [230.514857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807) <7> [230.515417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816) <7> [230.516025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816) <7> [230.516615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200) <7> [230.517180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316) <7> [230.517756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200) <7> [230.518311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316) <7> [230.518886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248) <7> [230.519467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280) <7> [230.520031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [230.520634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [230.521200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802) <7> [230.521780] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807) <7> [230.522334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816) <7> [230.522919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816) <7> [230.523516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [230.524079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [230.524662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [230.525231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [230.525810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [230.526364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310) <7> [230.526941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310) <7> [230.527518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in port_clock (expected 0, found 540000) <7> [230.528084] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] fastset requirement not met, forcing full modeset <7> [230.528802] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:109:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1 <7> [230.529369] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969 <7> [230.529937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:103:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55 <7> [230.530526] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm, swm, stwm <7> [230.531059] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 <7> [230.531625] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 <7> [230.532174] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 <7> [230.532861] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:109:pipe A] data rate 1445240 num active planes 1 <7> [230.533457] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446 <7> [230.534015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446 <7> [230.534581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446 <7> [230.535187] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:109:pipe A] min cdclk: 0 kHz -> 180655 kHz <7> [230.535839] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz <7> [230.536410] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change <7> [230.536990] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [230.537576] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1 <7> [230.538132] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:109:pipe A] allocated DPLL 0 <7> [230.538712] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:109:pipe A] reserving DPLL 0 <7> [230.539282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe A] enable: yes [modeset] <7> [230.539873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [230.540464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 <7> [230.541023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [230.541604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [230.542164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [230.542752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [230.543304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64 <7> [230.543885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [230.544555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7> [230.545110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7> [230.545707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [230.546259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7> [230.546826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [230.547378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7> [230.547953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [230.548534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0 <7> [230.549092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816 <7> [230.549681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [230.550236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [230.550813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [230.551369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa <7> [230.551958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa <7> [230.552549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655 <7> [230.553104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0 <7> [230.553682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [230.554239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [230.554821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [230.555370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [230.555971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [230.556550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [230.557104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [230.557686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.558243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.558817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.559368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [230.559942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [230.560520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.561079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.561659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [230.562217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [230.562790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [230.563341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:296] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [230.563920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [230.564498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0 <7> [230.565059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [230.565644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [230.566205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [230.566783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [230.567333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:plane 6A] fb: [NOFB], visible: no <7> [230.567904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 7A] fb: [NOFB], visible: no <7> [230.568475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:103:cursor A] fb: [NOFB], visible: no <7> [230.569575] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1 <7> [230.570293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI A/PHY A] <7> [230.570883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI B/PHY B] <7> [230.571445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST A] <7> [230.571981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST B] <7> [230.572542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST C] <7> [230.573088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DDI C (TC)/PHY C] <7> [230.573896] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:109:pipe A] <7> [230.574485] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [230.575170] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turn panel power on <7> [230.575745] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [230.576450] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [230.586554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [230.586990] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power on <7> [230.587448] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [230.799276] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [230.800649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A <7> [230.803159] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [230.803280] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14 <7> [230.805295] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [230.806391] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [230.808686] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0 <7> [230.809601] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0 <7> [230.812057] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Clock recovery OK <7> [230.812979] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [230.815664] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1 <7> [230.816550] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1 <7> [230.819318] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [230.820250] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7> [230.953197] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000889, pins 0x00000010, long 0x00000000 <7> [231.018933] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [231.019163] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - short <7> [231.020318] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:267:DDI A/PHY A] - short <7> [231.020554] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7> [231.021102] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7> [231.021695] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:268:eDP-1] set backlight PWM = 6946 <7> [231.023790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00 <7> [231.034545] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1 <7> [231.035094] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [231.037723] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:268:eDP-1] <7> [231.038515] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe A] <7> [231.041806] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [231.041855] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [231.043618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] <7> [231.043657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1] <7> [231.044976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [231.045559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000 <7> [231.046092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000 <7> [231.047131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc. <7> [231.047150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor <7> [231.047176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0 <7> [231.047277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no <7> [231.047903] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [231.048458] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [231.052349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes: <7> [231.052386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa <7> [231.052400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa <7> [231.052447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] <7> [231.052463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1] <7> [231.057273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected <7> [231.057303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] <7> [231.057318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1] <7> [231.062162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected <7> [231.062194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] <7> [231.062211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2] <7> [231.066994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected <7> [231.067018] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] enabled? yes <7> [231.067032] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:DP-1] enabled? no <7> [231.067043] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:286:HDMI-A-1] enabled? no <7> [231.067052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:292:HDMI-A-2] enabled? no <7> [231.067801] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [231.067892] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] found preferred mode: 3200x1800 <7> [231.067905] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config <7> [231.068064] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:109:pipe A] desired mode 3200x1800 set (0,0) <7> [231.087649] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [231.105518] Console: switching to colour frame buffer device 200x56

<6> [229.069647] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [229.069667] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [229.069674] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [229.143512] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [229.147232] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [229.147492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.147523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<6> [229.152522] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [229.152546] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [229.152554] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [229.152639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [229.152820] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.152838] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.157687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [229.158422] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing

<7> [229.158441] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [229.158498] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [229.163271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [229.163424] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [229.163440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [229.168336] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [229.168423] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.168437] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.173188] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<6> [229.173982] [IGT] kms_force_connector_basic: starting subtest force-connector-state

<6> [229.178501] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [229.178518] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [229.178525] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [229.193718] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]

<7> [229.193738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]

<7> [229.198315] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected

<7> [229.199486] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.199507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.204281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [229.205369] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [229.205385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [229.210205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [229.211753] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]

<7> [229.211770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]

<7> [229.212314] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [229.212851] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [229.213409] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [229.214053] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [229.214070] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor

<7> [229.214080] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0

<7> [229.214127] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no

<7> [229.214729] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [229.215260] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [229.216926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:

<7> [229.216944] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [229.216957] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [229.217026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]

<7> [229.217039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]

<7> [229.221729] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected

<7> [229.221802] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.221816] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.226559] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [229.226625] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [229.226638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [229.231320] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [229.328791] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:109:pipe A]

<7> [229.329216] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [229.330245] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [229.331222] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in cpu_transcoder (expected 4, found -1)

<7> [229.332188] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [229.333130] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 4209566/8388608 link 350797/524288, found tu 0, data 0/0 link 0/0)

<7> [229.334062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [229.334986] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [229.335928] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3200, found 0)

<7> [229.336889] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3316, found 0)

<7> [229.337831] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3200, found 0)

<7> [229.338752] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3316, found 0)

<7> [229.339679] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3248, found 0)

<7> [229.340611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3280, found 0)

<7> [229.341544] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [229.342439] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [229.343369] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1802, found 0)

<7> [229.344294] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1807, found 0)

<7> [229.345214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1816, found 0)

<7> [229.346180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1816, found 0)

<7> [229.347114] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3200, found 0)

<7> [229.348043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3316, found 0)

<7> [229.348964] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3200, found 0)

<7> [229.349877] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3316, found 0)

<7> [229.350801] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3248, found 0)

<7> [229.351747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3280, found 0)

<7> [229.352675] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [229.353597] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [229.354507] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1802, found 0)

<7> [229.355405] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1807, found 0)

<7> [229.356344] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1816, found 0)

<7> [229.357273] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1816, found 0)

<7> [229.358204] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [229.359132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [229.360043] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [229.360975] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [229.361908] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [229.362844] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 361310, found 0)

<7> [229.363778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 361310, found 0)

<7> [229.364700] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in port_clock (expected 540000, found 0)

<7> [229.365626] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] fastset requirement not met, forcing full modeset

<7> [229.366569] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:109:pipe A] releasing DPLL 0

<7> [229.367613] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:109:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 1024) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [229.368695] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 969) -> ( 0 - 0), size 969 -> 0

<7> [229.369585] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:103:cursor A] ddb ( 969 - 1024) -> ( 0 - 0), size 55 -> 0

<7> [229.370490] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [229.371374] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [229.372177] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [229.372985] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [229.373860] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:109:pipe A] data rate 0 num active planes 0

<7> [229.374691] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 0

<7> [229.375531] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 0

<7> [229.376332] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 0

<7> [229.377234] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:109:pipe A] min cdclk: 180655 kHz -> 0 kHz

<7> [229.378139] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 22582 kHz -> 0 kHz

<7> [229.378900] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [229.379511] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [229.380104] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0

<7> [229.380763] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe A] enable: no [modeset]

<7> [229.381372] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [229.381998] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [229.382614] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<6> [229.382987] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:00:1c.4

<4> [229.383004] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [229.383010] pcieport 0000:00:1c.4: device [8086:4dbc] error status/mask=00000001/00002000

<7> [229.383207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [229.383826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [229.384429] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:plane 6A] fb: [NOFB], visible: no

<7> [229.385064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 7A] fb: [NOFB], visible: no

<7> [229.385695] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:103:cursor A] fb: [NOFB], visible: no

<7> [229.407481] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]]

<7> [229.610768] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:268:eDP-1] set backlight PWM = 0

<7> [229.611978] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [229.629337] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turn panel power off

<7> [229.630348] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [229.631310] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [229.637899] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [229.638815] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long

<7> [229.639689] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [229.640629] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A]

<7> [229.658773] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [229.659707] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long

<7> [229.660577] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [229.661543] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A]

<7> [229.685580] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [229.686555] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long

<7> [229.687452] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 30

<7> [229.688482] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A]

<7> [229.691527] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [229.692534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A

<7> [229.693556] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:109:pipe A]

<7> [229.694624] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [229.695579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [229.696580] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [229.697569] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 0

<7> [229.698990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI A/PHY A]

<7> [229.700015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI B/PHY B]

<7> [229.700983] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST A]

<7> [229.701885] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST B]

<7> [229.702789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST C]

<7> [229.703700] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DDI C (TC)/PHY C]

<7> [229.704597] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:268:eDP-1]

<7> [229.706061] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe A]

<7> [229.733462] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:187:pipe B]

<7> [229.753692] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:265:pipe C]

<7> [229.767075] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 2 or reprobing

<7> [229.767093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.767105] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.810748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [229.811751] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [229.812614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [229.833011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [229.890038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [229.890068] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [229.890589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [229.946491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [229.946515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [229.946889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [229.947672] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from disconnected to connected

<7> [229.949310] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [229.950150] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [229.950430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:

<7> [229.950488] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [229.950503] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [229.950516] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [229.950528] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [229.950540] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [229.950710] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [229.950727] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [229.951356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [230.016468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 2

<7> [230.069852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [230.069883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [230.070274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [230.123452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [230.123510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [230.123938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [230.124561] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] probed modes:

<7> [230.124580] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [230.124595] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [230.124609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [230.124622] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [230.124634] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [230.125332] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 2 to 1 or reprobing

<7> [230.125351] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.125366] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.125915] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] status updated from connected to disconnected

<7> [230.125993] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.126023] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [230.126711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.126731] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.127236] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.127743] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [230.128261] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 1 to 0 or reprobing

<7> [230.128281] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.128298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.129126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [230.134093] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.134253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.134273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.140125] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<6> [230.141108] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS

<7> [230.144602] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:268:eDP-1] force updated from 0 to 0 or reprobing

<7> [230.144626] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]

<7> [230.144644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]

<7> [230.146628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [230.147873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [230.148997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [230.149827] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turning VDD on

<7> [230.150463] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power cycle (42 ms remaining)

<7> [230.194853] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [230.215724] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [230.216794] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [230.217731] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [230.277559] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000088a, pins 0x00000010, long 0x00000010

<7> [230.278531] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - long

<7> [230.279428] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 40

<7> [230.280410] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:267:DDI A/PHY A]

<7> [230.429384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [230.430337] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [230.431245] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [230.432354] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [230.432382] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor

<7> [230.432421] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0

<7> [230.432649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no

<7> [230.433573] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [230.434470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [230.438879] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:

<7> [230.438909] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [230.438931] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [230.439154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]

<7> [230.439179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]

<7> [230.440226] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [230.441136] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [230.442032] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [230.442970] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [230.442990] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor

<7> [230.443003] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0

<7> [230.443063] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no

<7> [230.443856] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [230.444720] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<6> [230.445950] pcieport 0000:00:1c.4: AER: Correctable error message received from 0000:02:00.0

<4> [230.445972] nvme 0000:02:00.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)

<4> [230.445983] nvme 0000:02:00.0: device [15b7:501e] error status/mask=00001000/00006000

<7> [230.446949] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:

<7> [230.446970] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [230.446987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [230.447632] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:268:eDP-1] EDID override reset

<7> [230.447761] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]

<7> [230.447783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]

<7> [230.448848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [230.449650] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [230.450417] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [230.451312] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [230.451332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor

<7> [230.451356] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0

<7> [230.451410] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no

<7> [230.452123] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [230.452836] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [230.456114] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:

<7> [230.456137] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [230.456153] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [230.456785] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:277:DP-1] EDID override reset

<7> [230.456868] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]

<7> [230.456885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]

<7> [230.461830] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected

<7> [230.462714] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:286:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [230.462741] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.462761] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.467796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.467964] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.467986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.473062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.473674] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:286:HDMI-A-1] EDID override reset

<7> [230.473772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [230.473793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [230.478861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [230.479688] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:292:HDMI-A-2] force updated from 0 to 0 or reprobing

<7> [230.479712] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [230.479730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [230.484724] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [230.484890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [230.484908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [230.489805] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [230.490216] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:292:HDMI-A-2] EDID override reset

<7> [230.490280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [230.490293] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [230.495102] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [230.498697] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [230.500755] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:268:eDP-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [230.501402] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:267:DDI A/PHY A][CRTC:109:pipe A] DP link limits: pixel clock 361310 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 24 max link_bpp 24.0000

<7> [230.501985] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 24 compressed 0.0000 link rate required 1083930 available 2160000

<7> [230.502694] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup time (330 us) too long

<7> [230.503251] i915 0000:00:02.0: [drm:intel_psr_compute_config [i915]] PSR condition failed: PSR setup timing not met

<7> [230.503859] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [230.504458] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:267:DDI A/PHY A] [CRTC:109:pipe A]

<7> [230.505001] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [230.505581] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [230.506144] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 4)

<7> [230.506725] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [230.507299] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 4209566/8388608 link 350797/524288)

<7> [230.508223] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [230.508826] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [230.509389] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3200)

<7> [230.510027] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3316)

<7> [230.510611] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3200)

<7> [230.511172] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3316)

<7> [230.511845] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3248)

<7> [230.512522] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3280)

<7> [230.513080] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [230.513656] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [230.514214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1802)

<7> [230.514857] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1807)

<7> [230.515417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1816)

<7> [230.516025] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1816)

<7> [230.516615] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3200)

<7> [230.517180] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3316)

<7> [230.517756] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3200)

<7> [230.518311] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3316)

<7> [230.518886] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3248)

<7> [230.519467] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3280)

<7> [230.520031] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [230.520634] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [230.521200] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1802)

<7> [230.521780] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1807)

<7> [230.522334] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1816)

<7> [230.522919] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1816)

<7> [230.523516] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [230.524079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [230.524662] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [230.525231] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [230.525810] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [230.526364] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 361310)

<7> [230.526941] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 361310)

<7> [230.527518] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:109:pipe A] fastset requirement not met in port_clock (expected 0, found 540000)

<7> [230.528084] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:109:pipe A] fastset requirement not met, forcing full modeset

<7> [230.528802] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:109:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 1024), active pipes 0x0 -> 0x1

<7> [230.529369] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 969), size 0 -> 969

<7> [230.529937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:103:cursor A] ddb ( 0 - 0) -> ( 969 - 1024), size 0 -> 55

<7> [230.530526] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm, swm, stwm

<7> [230.531059] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 3, 3, 4, 9, 15, 16, 0, 0, 0

<7> [230.531625] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 26, 79, 79, 79, 105, 235, 391, 417, 40, 0, 0

<7> [230.532174] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 88, 88, 88, 117, 260, 432, 460, 41, 0, 0

<7> [230.532861] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:109:pipe A] data rate 1445240 num active planes 1

<7> [230.533457] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 20069 required 1446

<7> [230.534015] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 21483 required 1446

<7> [230.534581] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 23719 required 1446

<7> [230.535187] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:109:pipe A] min cdclk: 0 kHz -> 180655 kHz

<7> [230.535839] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 22582 kHz

<7> [230.536410] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] Modeset required for cdclk change

<7> [230.536990] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [230.537576] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] New voltage level calculated to be logical 1, actual 1

<7> [230.538132] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:109:pipe A] allocated DPLL 0

<7> [230.538712] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:109:pipe A] reserving DPLL 0

<7> [230.539282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:109:pipe A] enable: yes [modeset]

<7> [230.539873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [230.540464] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0

<7> [230.541023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [230.541604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [230.542164] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [230.542752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [230.543304] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 4209566, data_n: 8388608, link_m: 350797, link_n: 524288, tu: 64

<7> [230.543885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [230.544555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled

<7> [230.545110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled

<7> [230.545707] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [230.546259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0

<7> [230.546826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [230.547378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1

<7> [230.547953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [230.548534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1816, vmax: 1816, flipline: 1816, pipeline full: 13, guardband: 15 vsync start: 0, vsync end: 0

<7> [230.549092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1816, vmax vtotal: 1816

<7> [230.549681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [230.550236] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [230.550813] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [230.551369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x40 0xa

<7> [230.551958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=361310, hd=3200 hb=3200-3316 hs=3248-3280 ht=3316, vd=1800 vb=1800-1816 vs=1802-1807 vt=1816, flags=0xa

<7> [230.552549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 3200x1800+0+0, pixel rate 361310, min cdclk 180655

<7> [230.553104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 74, ips linetime: 0

<7> [230.553682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [230.554239] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [230.554821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [230.555370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x4b, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [230.555971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [230.556550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [230.557104] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [230.557686] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.558243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.558817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.559368] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [230.559942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [230.560520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.561079] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.561659] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [230.562217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [230.562790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [230.563341] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:296] 3200x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [230.563920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [230.564498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 3200.000000x1800.000000+0.000000+0.000000 dst: 3200x1800+0+0

<7> [230.565059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [230.565644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [230.566205] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [230.566783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [230.567333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:plane 6A] fb: [NOFB], visible: no

<7> [230.567904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:93:plane 7A] fb: [NOFB], visible: no

<7> [230.568475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:103:cursor A] fb: [NOFB], visible: no

<7> [230.569575] i915 0000:00:02.0: [drm:intel_set_cdclk [i915]] Pre changing CDCLK to 192000 kHz, VCO 384000 kHz, ref 38400 kHz, bypass 50000 kHz, voltage level 1

<7> [230.570293] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DDI A/PHY A]

<7> [230.570883] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DDI B/PHY B]

<7> [230.571445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST A]

<7> [230.571981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST B]

<7> [230.572542] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST C]

<7> [230.573088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:291:DDI C (TC)/PHY C]

<7> [230.573896] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:109:pipe A]

<7> [230.574485] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [230.575170] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 turn panel power on

<7> [230.575745] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [230.576450] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [230.586554] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [230.586990] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 wait for panel power on

<7> [230.587448] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:267:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [230.799276] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [230.800649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A

<7> [230.803159] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [230.803280] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using LINK_BW_SET value 14

<7> [230.805295] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [230.806391] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [230.808686] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 0/0/0/0

<7> [230.809601] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 0/0/0/0

<7> [230.812057] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Clock recovery OK

<7> [230.812979] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [230.815664] i915 0000:00:02.0: [drm:intel_dp_get_adjust_train [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing request: 1/1/1/1, pre-emphasis request: 1/1/1/1

<7> [230.816550] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 1/1/1/1, pre-emphasis levels: 1/1/1/1

<7> [230.819318] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [230.820250] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:268:eDP-1][ENCODER:267:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4

<7> [230.953197] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000889, pins 0x00000010, long 0x00000000

<7> [231.018933] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [231.019163] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:267:DDI A/PHY A] - short

<7> [231.020318] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:267:DDI A/PHY A] - short

<7> [231.020554] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]]

<7> [231.021102] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A

<7> [231.021695] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:268:eDP-1] set backlight PWM = 6946

<7> [231.023790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 12 14 c4 41 00 00 01 c0 02 00 00 00 1f 0b 00

<7> [231.034545] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 23961600 bytes of contiguous stolen space for FBC, limit: 1

<7> [231.035094] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [231.037723] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:268:eDP-1]

<7> [231.038515] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:109:pipe A]

<7> [231.041806] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [231.043618] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1]

<7> [231.043657] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:268:eDP-1]

<7> [231.044976] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [231.045559] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000

<7> [231.046092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000

<7> [231.047131] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] Assigning DFP sink color depth as 8 bpc.

<7> [231.047150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD monitor

<7> [231.047176] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:268:eDP-1] ELD size 20, SAD count 0

<7> [231.047277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] VRR capable: no

<7> [231.047903] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [231.048458] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:268:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [231.052349] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:268:eDP-1] probed modes:

<7> [231.052386] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa

<7> [231.052400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3200x1800": 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa

<7> [231.052447] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1]

<7> [231.052463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:277:DP-1]

<7> [231.057273] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:277:DP-1] disconnected

<7> [231.057303] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1]

<7> [231.057318] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:286:HDMI-A-1]

<7> [231.062162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:286:HDMI-A-1] disconnected

<7> [231.062194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2]

<7> [231.062211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:292:HDMI-A-2]

<7> [231.066994] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:292:HDMI-A-2] disconnected

<7> [231.067018] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] enabled? yes

<7> [231.067032] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:277:DP-1] enabled? no

<7> [231.067043] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:286:HDMI-A-1] enabled? no

<7> [231.067052] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:292:HDMI-A-2] enabled? no

<7> [231.067801] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [231.067892] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:268:eDP-1] found preferred mode: 3200x1800

<7> [231.067905] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3200x1800 config

<7> [231.068064] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:109:pipe A] desired mode 3200x1800 set (0,0)

<7> [231.087649] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [231.105518] Console: switching to colour frame buffer device 200x56

Results for igt@kms_force_connector_basic@force-connector-state