Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

integration-manifest git-log-oneline i915_display_info0 igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.2-gb44ab3f8f (x86_64) (Linux: 6.18.0-CI_DRM_17630-g47b2cb8c909d+ x86_64)
Out 
Using IGT_SRANDOM=1764801527 for randomisation
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.027s)
Dmesg
<6> [251.527163] Console: switching to colour dummy device 80x25
<6> [251.528107] [IGT] kms_force_connector_basic: executing
<7> [251.758095] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [251.759027] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [251.759515] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [251.760386] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [251.760399] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.760408] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.760701] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.761015] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.761492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.761795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.762255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.762681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.762693] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.763288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.765061] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.765072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.765461] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.765938] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.766046] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.766058] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.766471] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.766909] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.767490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.767946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.768497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.768935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.768944] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.769350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.771097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.771107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.771496] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.771932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.772097] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.772108] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.772520] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.772962] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.773566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.774006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.774575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.775038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.775047] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.775451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.777168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.777177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.777566] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.778027] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [251.779372] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [251.780168] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 2 or reprobing
<7> [251.780184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.780197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from disconnected to connected
<7> [251.780234] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.780362] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.780630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.781126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.781714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.782161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.782185] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.782606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.784462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.784485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.785115] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [251.785128] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.785140] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.785151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.785161] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.785172] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.785264] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.785464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.785937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.786502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.786948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.786970] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.787390] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.789169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.789191] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.789772] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [251.789785] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.789796] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.789807] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.789817] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.789827] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.790339] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [251.790389] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.790470] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [251.790478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [251.790795] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [251.790815] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [251.790833] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [251.790841] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [251.790851] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [251.790861] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [251.790871] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.790881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.790890] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.791224] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:75:VGA-1] EDID override set
<7> [251.791280] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.791351] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD monitor IGT
<7> [251.791359] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:75:VGA-1] ELD size 24, SAD count 0
<7> [251.791367] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 56
<7> [251.791625] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa (STALE)
<7> [251.791642] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [251.791650] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [251.791659] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [251.791669] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.791678] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.791687] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.791994] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [251.792050] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.792267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.792590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.793047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.793321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.793337] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.793606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.794984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.794997] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.795346] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [251.795359] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [251.795370] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] probed modes:
<7> [251.795376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.795382] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.795388] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.795393] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.795398] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.795710] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 2 to 0 or reprobing
<7> [251.795745] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.795782] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.796103] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.796373] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.796807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.797097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.797519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.797856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.797867] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.798226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.799557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.799565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.799890] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.800180] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] status updated from connected to disconnected
<7> [251.800202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.800222] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.800315] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:75:VGA-1] EDID changed, epoch counter 58
<7> [251.800357] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.800461] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.800474] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.800910] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.801305] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.801900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.802308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.802873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.803283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.803294] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.803701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.805467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.805480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.805924] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.806324] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<6> [251.807746] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [251.808660] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [251.809779] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:71:LVDS-1] force updated from 0 to 0 or reprobing
<7> [251.809795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [251.809814] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [251.809824] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [251.809952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [251.809962] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [251.810026] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [251.810038] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [251.810046] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [251.810154] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [251.810162] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [251.810419] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:71:LVDS-1] EDID override reset
<7> [251.810466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [251.810480] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [251.810487] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [251.810594] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [251.810602] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [251.811075] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:75:VGA-1] force updated from 0 to 0 or reprobing
<7> [251.811088] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.811099] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.811450] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.811752] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.812250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.812515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.813027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.813506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.813519] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.814060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.816145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.816160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.816473] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.816760] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.816849] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.816860] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.817186] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.817455] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.817932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.818200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.818625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.818934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.818940] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.819252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.820557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.820564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.820857] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.821185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.821400] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:75:VGA-1] EDID override reset
<7> [251.821434] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [251.821440] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [251.821737] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [251.822058] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [251.822487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.822788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [251.823257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [251.823542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.823548] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.823882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [251.825228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [251.825235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [251.825502] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [251.825791] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [251.826176] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:78:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [251.826185] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [251.826192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [251.878251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [251.893799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.893814] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.894100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.909779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.909789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.910056] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [251.910138] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [251.910145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [251.961786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [251.977797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.977808] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.978094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.993789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.993798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.994062] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [251.994285] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:78:HDMI-A-1] EDID override reset
<7> [251.994317] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [251.994324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [252.046342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [252.062804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [252.062840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.063851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [252.079777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [252.079787] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [252.080061] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [252.080302] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:86:DP-1] EDID override reset
<7> [252.080334] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [252.080341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [252.084639] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [252.085088] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:91:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [252.085100] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [252.085109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [252.085633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.085952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [252.086393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.086660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.086667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.086947] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [252.088306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.088313] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [252.088584] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [252.088651] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [252.088659] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [252.089144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.089412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [252.089852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.090124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.090130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.090392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [252.091737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.091744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [252.092015] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [252.092214] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:91:HDMI-A-2] EDID override reset
<7> [252.092247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [252.092254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [252.092701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.093007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [252.093481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.093778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.093785] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.094089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [252.095386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.095393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [252.095663] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [252.096046] i915 0000:00:02.0: [drm:status_store] [CONNECTOR:95:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [252.096055] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [252.096063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [252.096511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.096807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [252.097279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.097544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.097550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.097885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [252.099262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.099270] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [252.099542] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [252.099608] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [252.099615] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [252.100100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.100367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [252.100808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.101216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.101225] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.101613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [252.103375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.103385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [252.103822] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [252.104135] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-3] EDID override reset
<7> [252.104181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [252.104192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [252.104798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.105121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [252.105555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.105856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.105862] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.106171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [252.107473] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.107480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [252.107795] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [252.108059] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:99:DP-2] EDID override reset
<7> [252.108091] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [252.108098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [252.112417] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [252.112623] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:103:DP-3] EDID override reset
<7> [252.112654] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [252.112661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [252.116992] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<6> [252.118453] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [252.119110] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [252.137192] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [252.137226] i915 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [252.137492] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1]
<7> [252.137534] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD monitor
<7> [252.137553] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:71:LVDS-1] ELD size 20, SAD count 0
<7> [252.137885] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:LVDS-1] probed modes:
<7> [252.137895] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 75200 1366 1414 1478 1582 768 772 779 792 0x48 0x9
<7> [252.137908] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1]
<7> [252.137916] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:75:VGA-1] force=1
<7> [252.139202] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0xf40000, result 0
<7> [252.140166] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT not detected via hotplug
<7> [252.141197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [252.141495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [252.141992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [252.142295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [252.142303] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.142600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [252.144148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [252.144156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [252.144424] i915 0000:00:02.0: [drm:intel_crt_detect_ddc [i915]] CRT not detected via DDC:0x50 [no valid EDID found]
<7> [252.144693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:75:VGA-1] disconnected
<7> [252.144704] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1]
<7> [252.144711] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:78:HDMI-A-1]
<7> [252.196443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
<7> [252.212802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [252.212813] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.213083] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [252.228784] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [252.228792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [252.229058] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:78:HDMI-A-1] disconnected
<7> [252.229069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1]
<7> [252.229076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:86:DP-1]
<7> [252.233356] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:DP-1] disconnected
<7> [252.233372] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2]
<7> [252.233380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:91:HDMI-A-2]
<7> [252.233883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.234208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [252.234676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [252.234991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.234998] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.235262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [252.236612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [252.236620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [252.236930] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:91:HDMI-A-2] disconnected
<7> [252.236939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3]
<7> [252.236946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-3]
<7> [252.237432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.237697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [252.238153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [252.238420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.238426] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [252.238695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [252.240097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [252.240104] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [252.240429] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:95:HDMI-A-3] disconnected
<7> [252.240443] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2]
<7> [252.240453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:99:DP-2]
<7> [252.244928] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:DP-2] disconnected
<7> [252.244952] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3]
<7> [252.244963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:103:DP-3]
<7> [252.249426] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:103:DP-3] disconnected
<7> [252.249439] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] enabled? yes
<7> [252.249447] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:75:VGA-1] enabled? no
<7> [252.249452] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:78:HDMI-A-1] enabled? no
<7> [252.249457] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:86:DP-1] enabled? no
<7> [252.249462] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:91:HDMI-A-2] enabled? no
<7> [252.249466] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:95:HDMI-A-3] enabled? no
<7> [252.249471] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:99:DP-2] enabled? no
<7> [252.249475] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:103:DP-3] enabled? no
<7> [252.249508] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [252.249529] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:71:LVDS-1] found preferred mode: 1366x768
<7> [252.249534] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1366x768 config
<7> [252.249559] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:51:pipe A] desired mode 1366x768 set (0,0)
<7> [252.253276] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [252.270269] Console: switching to colour frame buffer device 170x48
Created at 2025-12-05 09:40:10