<5>[ 0.000000] Linux version 6.18.0-CI_DRM_17613-g4ee45005b554+ (kbuild2@gfx-ci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Dec 1 15:28:10 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <4>[ 0.000000] x86/CPU: Running old microcode <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000060a3efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000060a3f000-0x0000000063db6fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000063db7000-0x0000000063edbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x0000000063edc000-0x0000000063ffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x0000000063fff000-0x0000000063ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000064000000-0x00000000787fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x63ffe000 ACPI 2.0=0x63ffe014 TPMFinalLog=0x63e11000 SMBIOS=0x60b16000 MEMATTR=0x5bd87018 ESRT=0x5ae00c18 MOKvar=0x60c4b000 TPMEventLog=0x63f0e018 <6>[ 0.000000] efi: Remove mem293: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem295: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000012] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000017] last_pfn = 0x880000 max_arch_pfn = 0x400000000 <6>[ 0.000021] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000023] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000631] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000633] last_pfn = 0x64000 max_arch_pfn = 0x400000000 <6>[ 0.005042] esrt: Reserving ESRT space from 0x000000005ae00c18 to 0x000000005ae00d40. <7>[ 0.005053] e820: update [mem 0x5ae00000-0x5ae00fff] usable ==> reserved <6>[ 0.005079] Using GB pages for direct mapping <6>[ 0.005845] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005849] printk: early log buf free: 258784(98%) <6>[ 0.005850] Secure boot disabled <6>[ 0.005852] ACPI: Early table checksum verification disabled <6>[ 0.005857] ACPI: RSDP 0x0000000063FFE014 000024 (v02 INTEL ) <6>[ 0.005862] ACPI: XSDT 0x0000000063F15228 000184 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005867] ACPI: FACP 0x0000000063FDC000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.005871] ACPI: DSDT 0x0000000063F55000 083F8A (v02 INTEL MTL 00000002 01000013) <6>[ 0.005873] ACPI: FACS 0x0000000063DF7000 000040 <6>[ 0.005874] ACPI: SSDT 0x0000000063FFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005877] ACPI: SSDT 0x0000000063FFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005878] ACPI: SSDT 0x0000000063FFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005880] ACPI: SSDT 0x0000000063FF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005882] ACPI: SSDT 0x0000000063FF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005884] ACPI: SSDT 0x0000000063FF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005886] ACPI: SSDT 0x0000000063FF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005888] ACPI: SSDT 0x0000000063FF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005891] ACPI: SSDT 0x0000000063FF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005893] ACPI: SSDT 0x0000000063FED000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005895] ACPI: DTPR 0x0000000063FEC000 000098 (v01 00000000 00000000) <6>[ 0.005896] ACPI: SSDT 0x0000000063FEB000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005898] ACPI: SSDT 0x0000000063FE8000 002494 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005900] ACPI: SSDT 0x0000000063FDE000 009AB7 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005902] ACPI: SSDT 0x0000000063FDD000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005904] ACPI: HPET 0x0000000063FDB000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005906] ACPI: APIC 0x0000000063FDA000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.005908] ACPI: MCFG 0x0000000063FD9000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.005910] ACPI: SSDT 0x0000000063F45000 00FCEF (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.005912] ACPI: SSDT 0x0000000063F43000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005914] ACPI: SSDT 0x0000000063F3E000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005916] ACPI: SSDT 0x0000000063F38000 00535A (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005918] ACPI: SSDT 0x0000000063FFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.005920] ACPI: TPM2 0x0000000063F37000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.005922] ACPI: LPIT 0x0000000063F36000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.005924] ACPI: WSMT 0x0000000063F35000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005926] ACPI: SSDT 0x0000000063F34000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005928] ACPI: SSDT 0x0000000063F2E000 00587D (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005930] ACPI: DBGP 0x0000000063F2D000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005933] ACPI: DBG2 0x0000000063F2C000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.005935] ACPI: NHLT 0x0000000063F2B000 00098B (v00 INTEL MTL 00000002 01000013) <6>[ 0.005937] ACPI: SSDT 0x0000000063F29000 001191 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005939] ACPI: SSDT 0x0000000063F23000 005CAE (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005941] ACPI: ECDT 0x0000000063F22000 000069 (v01 MTL 00000002 01000013) <6>[ 0.005943] ACPI: DMAR 0x0000000063F21000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005945] ACPI: FPDT 0x0000000063F20000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005946] ACPI: SSDT 0x0000000063F1E000 001015 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.005948] ACPI: SSDT 0x0000000063F1B000 00281A (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005950] ACPI: SSDT 0x0000000063F18000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005952] ACPI: SSDT 0x0000000063F16000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.005954] ACPI: ASF! 0x0000000063F42000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.005956] ACPI: PHAT 0x0000000063F14000 000810 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.005958] ACPI: BGRT 0x0000000063F13000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.005960] ACPI: Reserving FACP table memory at [mem 0x63fdc000-0x63fdc113] <6>[ 0.005961] ACPI: Reserving DSDT table memory at [mem 0x63f55000-0x63fd8f89] <6>[ 0.005962] ACPI: Reserving FACS table memory at [mem 0x63df7000-0x63df703f] <6>[ 0.005962] ACPI: Reserving SSDT table memory at [mem 0x63ffc000-0x63ffc38b] <6>[ 0.005963] ACPI: Reserving SSDT table memory at [mem 0x63ffb000-0x63ffb70c] <6>[ 0.005963] ACPI: Reserving SSDT table memory at [mem 0x63ffa000-0x63ffa5e3] <6>[ 0.005964] ACPI: Reserving SSDT table memory at [mem 0x63ff9000-0x63ff91aa] <6>[ 0.005965] ACPI: Reserving SSDT table memory at [mem 0x63ff8000-0x63ff8393] <6>[ 0.005965] ACPI: Reserving SSDT table memory at [mem 0x63ff6000-0x63ff7bae] <6>[ 0.005966] ACPI: Reserving SSDT table memory at [mem 0x63ff4000-0x63ff561f] <6>[ 0.005966] ACPI: Reserving SSDT table memory at [mem 0x63ff2000-0x63ff3348] <6>[ 0.005967] ACPI: Reserving SSDT table memory at [mem 0x63ff1000-0x63ff1fba] <6>[ 0.005968] ACPI: Reserving SSDT table memory at [mem 0x63fed000-0x63ff0bc7] <6>[ 0.005968] ACPI: Reserving DTPR table memory at [mem 0x63fec000-0x63fec097] <6>[ 0.005968] ACPI: Reserving SSDT table memory at [mem 0x63feb000-0x63febd02] <6>[ 0.005969] ACPI: Reserving SSDT table memory at [mem 0x63fe8000-0x63fea493] <6>[ 0.005970] ACPI: Reserving SSDT table memory at [mem 0x63fde000-0x63fe7ab6] <6>[ 0.005970] ACPI: Reserving SSDT table memory at [mem 0x63fdd000-0x63fdd0f8] <6>[ 0.005971] ACPI: Reserving HPET table memory at [mem 0x63fdb000-0x63fdb037] <6>[ 0.005971] ACPI: Reserving APIC table memory at [mem 0x63fda000-0x63fda357] <6>[ 0.005972] ACPI: Reserving MCFG table memory at [mem 0x63fd9000-0x63fd903b] <6>[ 0.005972] ACPI: Reserving SSDT table memory at [mem 0x63f45000-0x63f54cee] <6>[ 0.005973] ACPI: Reserving SSDT table memory at [mem 0x63f43000-0x63f4447e] <6>[ 0.005973] ACPI: Reserving SSDT table memory at [mem 0x63f3e000-0x63f4189b] <6>[ 0.005974] ACPI: Reserving SSDT table memory at [mem 0x63f38000-0x63f3d359] <6>[ 0.005974] ACPI: Reserving SSDT table memory at [mem 0x63ffd000-0x63ffd60d] <6>[ 0.005975] ACPI: Reserving TPM2 table memory at [mem 0x63f37000-0x63f3704b] <6>[ 0.005975] ACPI: Reserving LPIT table memory at [mem 0x63f36000-0x63f360cb] <6>[ 0.005976] ACPI: Reserving WSMT table memory at [mem 0x63f35000-0x63f35027] <6>[ 0.005976] ACPI: Reserving SSDT table memory at [mem 0x63f34000-0x63f34ca5] <6>[ 0.005977] ACPI: Reserving SSDT table memory at [mem 0x63f2e000-0x63f3387c] <6>[ 0.005977] ACPI: Reserving DBGP table memory at [mem 0x63f2d000-0x63f2d033] <6>[ 0.005978] ACPI: Reserving DBG2 table memory at [mem 0x63f2c000-0x63f2c053] <6>[ 0.005978] ACPI: Reserving NHLT table memory at [mem 0x63f2b000-0x63f2b98a] <6>[ 0.005979] ACPI: Reserving SSDT table memory at [mem 0x63f29000-0x63f2a190] <6>[ 0.005980] ACPI: Reserving SSDT table memory at [mem 0x63f23000-0x63f28cad] <6>[ 0.005980] ACPI: Reserving ECDT table memory at [mem 0x63f22000-0x63f22068] <6>[ 0.005981] ACPI: Reserving DMAR table memory at [mem 0x63f21000-0x63f210a7] <6>[ 0.005981] ACPI: Reserving FPDT table memory at [mem 0x63f20000-0x63f20043] <6>[ 0.005982] ACPI: Reserving SSDT table memory at [mem 0x63f1e000-0x63f1f014] <6>[ 0.005982] ACPI: Reserving SSDT table memory at [mem 0x63f1b000-0x63f1d819] <6>[ 0.005983] ACPI: Reserving SSDT table memory at [mem 0x63f18000-0x63f1a8d2] <6>[ 0.005984] ACPI: Reserving SSDT table memory at [mem 0x63f16000-0x63f1719f] <6>[ 0.005984] ACPI: Reserving ASF! table memory at [mem 0x63f42000-0x63f42073] <6>[ 0.005985] ACPI: Reserving PHAT table memory at [mem 0x63f14000-0x63f1480f] <6>[ 0.005986] ACPI: Reserving BGRT table memory at [mem 0x63f13000-0x63f13037] <6>[ 0.006081] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006293] No NUMA configuration found <6>[ 0.006293] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] <6>[ 0.006301] NODE_DATA(0) allocated [mem 0x87fb52e40-0x87fb7dfff] <6>[ 0.006460] Zone ranges: <6>[ 0.006461] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006462] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006463] Normal [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006464] Device empty <6>[ 0.006465] Movable zone start for each node <6>[ 0.006466] Early memory node ranges <6>[ 0.006466] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006467] node 0: [mem 0x0000000000100000-0x0000000060a3efff] <6>[ 0.006468] node 0: [mem 0x0000000063fff000-0x0000000063ffffff] <6>[ 0.006468] node 0: [mem 0x0000000100000000-0x000000087fffffff] <6>[ 0.006470] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] <6>[ 0.006477] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006499] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.008668] On node 0, zone DMA32: 13760 pages in unavailable ranges <6>[ 0.050482] On node 0, zone Normal: 16384 pages in unavailable ranges <6>[ 0.050955] ACPI: PM-Timer IO Port: 0x1808 <4>[ 0.050961] CPU topo: Boot CPU APIC ID not the first enumerated APIC ID: 20 != 10 <4>[ 0.050962] CPU topo: [Firmware Bug]: APIC enumeration order not specification compliant <6>[ 0.050965] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.051010] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.051012] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.051014] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.051017] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.051018] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.051031] e820: update [mem 0x5bda0000-0x5bdbafff] usable ==> reserved <6>[ 0.051038] TSC deadline timer available <6>[ 0.051042] CPU topo: Max. logical packages: 1 <6>[ 0.051042] CPU topo: Max. logical dies: 1 <6>[ 0.051042] CPU topo: Max. dies per package: 1 <6>[ 0.051047] CPU topo: Max. threads per core: 2 <6>[ 0.051047] CPU topo: Num. cores per package: 16 <6>[ 0.051048] CPU topo: Num. threads per package: 22 <6>[ 0.051048] CPU topo: Allowing 22 present CPUs plus 0 hotplug CPUs <6>[ 0.051071] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.051073] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.051075] PM: hibernation: Registered nosave memory: [mem 0x5ae00000-0x5ae00fff] <6>[ 0.051077] PM: hibernation: Registered nosave memory: [mem 0x5bda0000-0x5bdbafff] <6>[ 0.051078] PM: hibernation: Registered nosave memory: [mem 0x60a3f000-0x63ffefff] <6>[ 0.051080] PM: hibernation: Registered nosave memory: [mem 0x64000000-0xffffffff] <6>[ 0.051083] [mem 0x78800000-0xfed1ffff] available for PCI devices <6>[ 0.051085] Booting paravirtualized kernel on bare hardware <6>[ 0.051088] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.051103] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.052588] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.052595] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.052597] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.052601] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.052603] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.052628] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.052740] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.052760] random: crng init done <6>[ 0.055574] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.056966] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.057103] software IO TLB: area num 32. <6>[ 0.068463] Fallback order for Node 0: 0 <6>[ 0.068467] Built 1 zonelists, mobility grouping on. Total pages: 8260062 <6>[ 0.068468] Policy zone: Normal <6>[ 0.068482] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.068482] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.068486] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.069938] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.112480] ********************************************************** <4>[ 0.112482] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112482] ** ** <4>[ 0.112482] ** This system shows unhashed kernel memory addresses ** <4>[ 0.112483] ** via the console, logs, and other interfaces. This ** <4>[ 0.112483] ** might reduce the security of your system. ** <4>[ 0.112483] ** ** <4>[ 0.112483] ** If you see this message and you are not debugging ** <4>[ 0.112484] ** the kernel, report this immediately to your system ** <4>[ 0.112484] ** administrator! ** <4>[ 0.112484] ** ** <4>[ 0.112484] ** Use hash_pointers=always to force this mode off ** <4>[ 0.112484] ** ** <4>[ 0.112485] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.112485] ********************************************************** <6>[ 0.114079] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.124675] ftrace: allocating 60619 entries in 240 pages <6>[ 0.124677] ftrace: allocated 240 pages with 4 groups <6>[ 0.126467] Dynamic Preempt: voluntary <6>[ 0.127579] Running RCU self tests <6>[ 0.127580] Running RCU synchronous self tests <6>[ 0.127580] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.127581] rcu: RCU lockdep checking is enabled. <6>[ 0.127581] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=22. <6>[ 0.127582] Trampoline variant of Tasks RCU enabled. <6>[ 0.127582] Rude variant of Tasks RCU enabled. <6>[ 0.127583] Tracing variant of Tasks RCU enabled. <6>[ 0.127583] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.127583] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.127718] Running RCU synchronous self tests <6>[ 0.127727] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127732] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.127736] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=22. <6>[ 0.139767] NR_IRQS: 524544, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.140348] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.140948] Console: colour dummy device 80x25 <6>[ 0.140959] printk: legacy console [tty0] enabled <6>[ 0.142237] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.142245] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.142249] ... MAX_LOCK_DEPTH: 48 <6>[ 0.142253] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.142256] ... CLASSHASH_SIZE: 4096 <6>[ 0.142260] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.142264] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.142268] ... CHAINHASH_SIZE: 262144 <6>[ 0.142272] memory used by lock dependency info: 54145 kB <6>[ 0.142276] memory used for stack traces: 4224 kB <6>[ 0.142280] per task-struct memory footprint: 1920 bytes <6>[ 0.142352] ACPI: Core revision 20250807 <6>[ 0.143396] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.143453] APIC: Switch to symmetric I/O mode setup <6>[ 0.143462] DMAR: Host address width 42 <6>[ 0.143468] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.143507] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.143517] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.143538] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0efde <6>[ 0.143548] DMAR: SATC flags: 0x1 <6>[ 0.143562] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.143570] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.143577] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.145285] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.149693] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.149715] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.149784] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.149791] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.149991] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.149998] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.150008] process: using mwait in idle threads <6>[ 0.150016] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.150032] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.150041] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.150048] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.150053] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.150064] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.150083] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.150092] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.150099] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.150106] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.150113] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.150120] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.150128] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.150134] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.150140] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.150147] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.150153] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.150709] Freeing SMP alternatives memory: 56K <6>[ 0.150709] pid_max: default: 32768 minimum: 301 <6>[ 0.150709] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.150709] landlock: Up and running. <6>[ 0.150709] Yama: becoming mindful. <6>[ 0.150709] AppArmor: AppArmor initialized <6>[ 0.150709] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150709] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.150709] Running RCU synchronous self tests <6>[ 0.150709] Running RCU synchronous self tests <6>[ 0.150709] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.150709] Performance Events: XSAVE Architectural LBR, PEBS fmt5+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.150878] core: cpu_core PMU driver: <6>[ 0.150887] ... version: 5 <6>[ 0.150891] ... bit width: 48 <6>[ 0.150895] ... generic counters: 8 <6>[ 0.150898] ... generic bitmap: 00000000000000ff <6>[ 0.150903] ... fixed-purpose counters: 4 <6>[ 0.150907] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.150911] ... value mask: 0000ffffffffffff <6>[ 0.150916] ... max period: 00007fffffffffff <6>[ 0.150921] ... global_ctrl mask: 0001000f000000ff <6>[ 0.151108] signal: max sigframe size: 3632 <6>[ 0.151139] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 0.151296] rcu: Hierarchical SRCU implementation. <6>[ 0.151301] rcu: Max phase no-delay instances is 400. <6>[ 0.151492] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level <6>[ 0.154173] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.154960] smp: Bringing up secondary CPUs ... <6>[ 0.155367] smpboot: x86: Booting SMP configuration: <6>[ 0.155374] .... node #0, CPUs: #1 #3 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.010229] core: cpu_atom PMU driver: <6>[ 0.010229] ... version: 5 <6>[ 0.010229] ... bit width: 48 <6>[ 0.010229] ... generic counters: 8 <6>[ 0.010229] ... generic bitmap: 00000000000000ff <6>[ 0.010229] ... fixed-purpose counters: 3 <6>[ 0.010229] ... fixed-purpose bitmap: 0000000000000007 <6>[ 0.010229] ... value mask: 0000ffffffffffff <6>[ 0.010229] ... max period: 00007fffffffffff <6>[ 0.010229] ... global_ctrl mask: 00000007000000ff <5>[ 0.169158] #2 #4 #5 #7 #9 #11 <6>[ 0.175786] smp: Brought up 1 node, 22 CPUs <6>[ 0.175833] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.178783] Memory: 32225720K/33040248K available (25429K kernel code, 5652K rwdata, 9520K rodata, 5704K init, 68232K bss, 779972K reserved, 0K cma-reserved) <6>[ 0.183027] devtmpfs: initialized <6>[ 0.183109] x86/mm: Memory block size: 128MB <6>[ 0.207599] ACPI: PM: Registering ACPI NVS region [mem 0x63db7000-0x63edbfff] (1200128 bytes) <6>[ 0.208388] Running RCU synchronous self tests <6>[ 0.208408] Running RCU synchronous self tests <6>[ 0.208425] Running RCU Tasks wait API self tests <6>[ 0.208713] Running RCU Tasks Rude wait API self tests <6>[ 0.208717] Running RCU Tasks Trace wait API self tests <6>[ 0.221734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.221941] posixtimers hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 0.222232] futex hash table entries: 8192 (1048576 bytes on 1 NUMA nodes, total 1024 KiB, linear). <6>[ 0.222823] pinctrl core: initialized pinctrl subsystem <6>[ 0.223540] PM: RTC time: 16:46:32, date: 2025-12-01 <6>[ 0.224407] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.225582] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.225996] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.226395] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.226455] audit: initializing netlink subsys (disabled) <5>[ 0.226489] audit: type=2000 audit(1764607592.076:1): state=initialized audit_enabled=0 res=1 <6>[ 0.227351] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.227353] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.227359] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.227363] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.227368] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.227407] cpuidle: using governor ladder <6>[ 0.227407] cpuidle: using governor menu <6>[ 0.227796] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.228293] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.228323] PCI: Using configuration type 1 for base access <6>[ 0.228473] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.229011] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.229011] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.229011] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.229011] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.232251] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.232261] raid6: using avx2x2 recovery algorithm <6>[ 0.232854] fbcon: Taking over console <6>[ 0.233034] ACPI: Added _OSI(Module Device) <6>[ 0.233039] ACPI: Added _OSI(Processor Device) <6>[ 0.233043] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.240719] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.936842] ACPI: 28 ACPI AML tables successfully acquired and loaded <6>[ 0.947330] ACPI: EC: EC started <6>[ 0.947341] ACPI: EC: interrupt blocked <6>[ 0.949902] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.949907] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.062716] Callback from call_rcu_tasks() invoked. <6>[ 1.254387] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.254403] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.347034] ACPI: Interpreter enabled <6>[ 1.347227] ACPI: PM: (supports S0 S4 S5) <6>[ 1.347236] ACPI: Using IOAPIC for interrupt routing <6>[ 1.359016] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.359034] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.410054] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.410094] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 1.503578] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.841994] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 1.876130] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 1.889892] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 1.915789] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 1.927669] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 1.939913] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 1.952572] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 2.183699] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.184059] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.184378] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.315800] ACPI: \_TZ_.FN00: New power resource <6>[ 2.317714] ACPI: \_TZ_.FN01: New power resource <6>[ 2.318842] ACPI: \_TZ_.FN02: New power resource <6>[ 2.319897] ACPI: \_TZ_.FN03: New power resource <6>[ 2.322091] ACPI: \_TZ_.FN04: New power resource <6>[ 2.327750] ACPI: \PIN_: New power resource <6>[ 2.333025] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.333056] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.337088] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 2.345247] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC] <6>[ 2.368117] PCI host bridge to bus 0000:00 <6>[ 2.368180] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.368197] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.368214] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.368230] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window] <6>[ 2.368246] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 2.368264] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.384529] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.385655] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.385703] pci 0000:00:02.0: BAR 0 [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 2.385719] pci 0000:00:02.0: BAR 2 [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 2.386714] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics <6>[ 2.386714] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.386714] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 2.386714] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x00ffffff 64bit pref] <6>[ 2.386714] pci 0000:00:02.0: VF BAR 0 [mem 0x00000000-0x06ffffff 64bit pref]: contains BAR 0 for 7 VFs <6>[ 2.389077] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.389133] pci 0000:00:04.0: BAR 0 [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 2.391591] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.391631] pci 0000:00:05.0: BAR 0 [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 2.391649] pci 0000:00:05.0: enabling Extended Tags <6>[ 2.393757] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 PCIe Root Port <6>[ 2.393799] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.393816] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 2.393966] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 2.394069] pci 0000:00:06.0: PTM enabled (root), 4ns granularity <6>[ 2.403991] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 PCIe Root Port <6>[ 2.404033] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.404048] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 2.404069] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 2.404189] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.404276] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.413163] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 PCIe Root Port <6>[ 2.413205] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.413221] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 2.413242] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 2.413359] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 2.413446] pci 0000:00:07.3: PTM enabled (root), 4ns granularity <6>[ 2.422413] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 conventional PCI endpoint <6>[ 2.422471] pci 0000:00:08.0: BAR 0 [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 2.423581] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.423621] pci 0000:00:0a.0: BAR 0 [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 2.423640] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.424032] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.424074] pci 0000:00:0b.0: BAR 0 [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 2.424088] pci 0000:00:0b.0: BAR 4 [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 2.424955] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.425008] pci 0000:00:0d.0: BAR 0 [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 2.425114] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.428738] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.428832] pci 0000:00:0d.3: BAR 0 [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 2.428846] pci 0000:00:0d.3: BAR 2 [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 2.428913] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.428922] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.432023] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.432074] pci 0000:00:12.0: BAR 0 [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 2.432144] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.437182] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.437234] pci 0000:00:14.0: BAR 0 [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 2.437305] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.441486] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.441546] pci 0000:00:14.2: BAR 0 [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 2.441560] pci 0000:00:14.2: BAR 2 [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 2.442334] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.442427] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.455057] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.455122] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.468128] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.468197] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.480340] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.480394] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.492196] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.492250] pci 0000:00:16.0: BAR 0 [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 2.492313] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.495246] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.495288] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.495294] pci 0000:00:16.3: BAR 1 [mem 0x8c121000-0x8c121fff] <6>[ 2.495556] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.495616] pci 0000:00:19.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.506206] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.506263] pci 0000:00:19.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.518362] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.519954] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.520071] pci 0000:00:1f.3: BAR 0 [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 2.520087] pci 0000:00:1f.3: BAR 4 [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 2.520205] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.520703] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.520755] pci 0000:00:1f.4: BAR 0 [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 2.520766] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.522216] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.522317] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.522568] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.522649] pci 0000:00:1f.6: BAR 0 [mem 0x8c100000-0x8c11ffff] <6>[ 2.522734] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.524484] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 PCIe Endpoint <6>[ 2.524547] pci 0000:01:00.0: BAR 0 [mem 0x8c000000-0x8c003fff 64bit] <6>[ 2.527231] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 2.527437] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 2.527634] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 2.946384] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 7.523479] Low-power S0 idle used by default for system suspend <6>[ 7.598856] ACPI: EC: interrupt unblocked <6>[ 7.598868] ACPI: EC: event unblocked <6>[ 7.598902] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.598909] ACPI: EC: GPE=0x6e <6>[ 7.598915] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.598927] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.600191] iommu: Default domain type: Translated <6>[ 7.600191] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.604307] SCSI subsystem initialized <7>[ 7.604421] libata version 3.00 loaded. <6>[ 7.604880] ACPI: bus type USB registered <6>[ 7.605095] usbcore: registered new interface driver usbfs <6>[ 7.605194] usbcore: registered new interface driver hub <6>[ 7.605323] usbcore: registered new device driver usb <6>[ 7.605608] pps_core: LinuxPPS API ver. 1 registered <6>[ 7.605617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 7.605661] PTP clock support registered <6>[ 7.605884] EDAC MC: Ver: 3.0.0 <6>[ 7.607188] efivars: Registered efivars operations <6>[ 7.610223] NetLabel: Initializing <6>[ 7.610234] NetLabel: domain hash size = 128 <6>[ 7.610243] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 7.610371] NetLabel: unlabeled traffic allowed by default <6>[ 7.610404] mctp: management component transport protocol core <6>[ 7.610415] NET: Registered PF_MCTP protocol family <6>[ 7.610503] PCI: Using ACPI for IRQ routing <7>[ 7.628255] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.628447] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 7.628649] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.628664] e820: reserve RAM buffer [mem 0x5ae00000-0x5bffffff] <7>[ 7.628669] e820: reserve RAM buffer [mem 0x5bda0000-0x5bffffff] <7>[ 7.628674] e820: reserve RAM buffer [mem 0x60a3f000-0x63ffffff] <6>[ 7.629189] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.629189] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.629189] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.629189] vgaarb: loaded <6>[ 7.638139] clocksource: Switched to clocksource tsc-early <5>[ 7.646498] VFS: Disk quotas dquot_6.6.0 <6>[ 7.646548] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 7.648467] AppArmor: AppArmor Filesystem Enabled <6>[ 7.648820] pnp: PnP ACPI init <6>[ 7.650468] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.650490] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.651483] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.654127] system 00:03: [io 0x06a4] has been reserved <6>[ 7.654151] system 00:03: [io 0x06a0] has been reserved <4>[ 7.690546] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <4>[ 7.690561] pnp 00:04: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.690728] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.690738] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.690754] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.690766] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.690777] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.690788] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.695859] system 00:05: [io 0x2000-0x20fe] has been reserved <4>[ 7.696865] pnp 00:07: disabling [mem 0x00000000-0x0009cfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit pref] <6>[ 7.699596] pnp: PnP ACPI: found 8 devices <6>[ 7.711944] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.712279] NET: Registered PF_INET protocol family <6>[ 7.712517] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.714718] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 7.714859] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.715089] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.716140] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 7.717587] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.718172] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.718898] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 7.719581] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.719641] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 <6>[ 7.719673] pci 0000:00:02.0: VF BAR 0 [mem 0x501b000000-0x5021ffffff 64bit pref]: assigned <6>[ 7.719685] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 7.719691] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff]: assigned <6>[ 7.719697] pci 0000:00:15.0: BAR 0 [mem 0x501a2d9000-0x501a2d9fff 64bit]: assigned <6>[ 7.719712] pci 0000:00:15.1: BAR 0 [mem 0x501a2da000-0x501a2dafff 64bit]: assigned <6>[ 7.719730] pci 0000:00:15.2: BAR 0 [mem 0x501a2dc000-0x501a2dcfff 64bit]: assigned <6>[ 7.719744] pci 0000:00:15.3: BAR 0 [mem 0x501a2dd000-0x501a2ddfff 64bit]: assigned <6>[ 7.719759] pci 0000:00:19.0: BAR 0 [mem 0x501a2de000-0x501a2defff 64bit]: assigned <6>[ 7.719777] pci 0000:00:19.1: BAR 0 [mem 0x501a2df000-0x501a2dffff 64bit]: assigned <6>[ 7.719791] pci 0000:00:1f.5: BAR 0 [mem 0x8c120000-0x8c120fff]: assigned <6>[ 7.719814] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.719823] pci 0000:00:06.0: bridge window [mem 0x8c000000-0x8c0fffff] <6>[ 7.719833] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.719841] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.719848] pci 0000:00:07.0: bridge window [mem 0x86000000-0x8bffffff] <6>[ 7.719855] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.719864] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.719869] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.719882] pci 0000:00:07.3: bridge window [mem 0x80000000-0x85ffffff] <6>[ 7.719889] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.719898] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.719903] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.719908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.719913] pci_bus 0000:00: resource 7 [mem 0x80000000-0xbfffffff window] <6>[ 7.719917] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.719923] pci_bus 0000:01: resource 1 [mem 0x8c000000-0x8c0fffff] <6>[ 7.719928] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.719932] pci_bus 0000:02: resource 1 [mem 0x86000000-0x8bffffff] <6>[ 7.719937] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.719942] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.719946] pci_bus 0000:2c: resource 1 [mem 0x80000000-0x85ffffff] <6>[ 7.719951] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.721206] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.723126] PCI: CLS 0 bytes, default 64 <6>[ 7.723246] DMAR: No RMRR found <6>[ 7.723257] DMAR: No ATSR found <6>[ 7.723260] DMAR: dmar0: Using Queued invalidation <6>[ 7.723266] DMAR: dmar1: Using Queued invalidation <6>[ 7.724277] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.725547] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.725607] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.725662] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.725738] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.725807] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.725868] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.725929] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.725982] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.726036] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.726103] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.726145] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.726206] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.726280] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.726321] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.726400] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.726446] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.726486] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.726526] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.726592] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.726634] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.726703] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.726750] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.726837] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.726878] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.726920] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.726962] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.727003] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.727084] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.741376] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.741384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.741389] software IO TLB: mapped [mem 0x0000000056e00000-0x000000005ae00000] (64MB) <6>[ 7.744488] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.744735] clocksource: Switched to clocksource tsc <6>[ 7.744846] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 7.751713] Initialise system trusted keyrings <5>[ 7.751778] Key type blacklist registered <6>[ 7.751970] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 7.760250] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 7.760387] ntfs3: Enabled Linux POSIX ACLs support <6>[ 7.760396] ntfs3: Read-only LZX/Xpress compression included <5>[ 7.762041] integrity: Platform Keyring initialized <5>[ 7.762071] integrity: Machine keyring initialized <6>[ 7.770290] xor: automatically using best checksumming function avx <5>[ 7.770305] Key type asymmetric registered <5>[ 7.770319] Asymmetric key parser 'x509' registered <6>[ 7.770470] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 7.770918] io scheduler mq-deadline registered <6>[ 7.774421] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 7.776881] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.779058] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.780909] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.783477] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.783932] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.784359] ACPI: button: Lid Switch [LID0] <6>[ 7.784740] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.784991] ACPI: button: Sleep Button [SLPB] <6>[ 7.785306] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.785555] ACPI: button: Power Button [PWRB] <6>[ 7.925214] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 7.925223] ACPI: thermal: Thermal Zone [TZ00] (46 C) <6>[ 7.926390] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 7.926991] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.928500] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.949137] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.960793] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 7.962290] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 7.984662] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 7.986007] hpet_acpi_add: no address or irqs in _CRS <6>[ 7.986088] Linux agpgart interface v0.103 <6>[ 8.013034] ACPI: bus type drm_connector registered <7>[ 8.014251] initcall simpledrm_platform_driver_init blacklisted <6>[ 8.035689] loop: module loaded <6>[ 8.083493] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 8.234797] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 8.337817] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 8.428808] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 8.540795] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 8.618664] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <5>[ 8.707333] Key type psk registered <6>[ 8.709400] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 8.710062] tun: Universal TUN/TAP device driver, 1.6 <6>[ 8.710252] nvme nvme0: pci function 0000:01:00.0 <6>[ 8.710758] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.710842] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 8.712567] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.713907] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 8.713922] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 8.713935] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.714213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.714226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.714238] usb usb1: Product: xHCI Host Controller <6>[ 8.714243] usb usb1: Manufacturer: Linux 6.18.0-CI_DRM_17613-g4ee45005b554+ xhci-hcd <6>[ 8.714249] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 8.715021] hub 1-0:1.0: USB hub found <6>[ 8.715104] hub 1-0:1.0: 1 port detected <6>[ 8.717716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.717725] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.717731] usb usb2: Product: xHCI Host Controller <6>[ 8.717735] usb usb2: Manufacturer: Linux 6.18.0-CI_DRM_17613-g4ee45005b554+ xhci-hcd <6>[ 8.717741] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 8.718370] hub 2-0:1.0: USB hub found <6>[ 8.718437] hub 2-0:1.0: 4 ports detected <6>[ 8.737979] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.737999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 8.739560] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 8.741132] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 8.741158] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 8.741183] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 8.741461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 8.741477] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.741489] usb usb3: Product: xHCI Host Controller <6>[ 8.741498] usb usb3: Manufacturer: Linux 6.18.0-CI_DRM_17613-g4ee45005b554+ xhci-hcd <6>[ 8.741511] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 8.742389] hub 3-0:1.0: USB hub found <6>[ 8.742443] hub 3-0:1.0: 12 ports detected <6>[ 8.783887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 8.783908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 8.783921] usb usb4: Product: xHCI Host Controller <6>[ 8.783930] usb usb4: Manufacturer: Linux 6.18.0-CI_DRM_17613-g4ee45005b554+ xhci-hcd <6>[ 8.783943] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 8.784153] nvme nvme0: allocated 64 MiB host memory buffer (1 segment). <6>[ 8.785384] hub 4-0:1.0: USB hub found <6>[ 8.785429] hub 4-0:1.0: 2 ports detected <6>[ 8.791518] usbcore: registered new interface driver usb-storage <6>[ 8.791750] usbcore: registered new interface driver usbserial_generic <6>[ 8.791844] usbserial: USB Serial support registered for generic <6>[ 8.791931] usbcore: registered new interface driver ftdi_sio <6>[ 8.791986] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 8.792081] usbcore: registered new interface driver pl2303 <6>[ 8.792130] usbserial: USB Serial support registered for pl2303 <6>[ 8.792826] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 8.792839] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 8.818855] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 8.829280] nvme0n1: p1 p2 <3>[ 9.494380] i8042: Can't read CTR while initializing i8042 <3>[ 9.494392] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 9.494997] mousedev: PS/2 mouse device common for all mice <6>[ 9.496213] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 9.498051] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 9.498261] rtc_cmos rtc_cmos: setting system clock to 2025-12-01T16:46:41 UTC (1764607601) <6>[ 9.498479] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 9.498541] i2c_dev: i2c /dev entries driver <6>[ 9.503123] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 9.503139] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 9.503152] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 9.503194] device-mapper: uevent: version 1.0.3 <6>[ 9.503573] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 9.503594] intel_pstate: Intel P-state driver initializing <6>[ 9.514643] intel_pstate: HWP enabled <6>[ 9.514651] sdhci: Secure Digital Host Controller Interface driver <6>[ 9.514656] sdhci: Copyright(c) Pierre Ossman <6>[ 9.514782] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 9.517927] drop_monitor: Initializing network drop monitor service <6>[ 9.518136] NET: Registered PF_INET6 protocol family <6>[ 9.519300] Segment Routing with IPv6 <6>[ 9.519336] In-situ OAM (IOAM) with IPv6 <6>[ 9.519379] NET: Registered PF_PACKET protocol family <5>[ 9.519502] Key type dns_resolver registered <4>[ 9.533530] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 9.535115] microcode: Current revision: 0x0000001c <6>[ 9.536970] IPI shorthand broadcast: enabled <6>[ 9.550647] sched_clock: Marking stable (9541005463, 9229925)->(9640187947, -89952559) <6>[ 9.552127] registered taskstats version 1 <5>[ 9.558772] Loading compiled-in X.509 certificates <6>[ 9.604516] Demotion targets for Node 0: null <6>[ 9.604806] kmemleak: Kernel memory leak detector initialized (mem pool available: 14930) <6>[ 9.604817] kmemleak: Automatic memory scanning thread started <5>[ 9.605070] Key type .fscrypt registered <5>[ 9.605075] Key type fscrypt-provisioning registered <6>[ 9.608123] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 9.608269] Key type trusted registered <5>[ 9.614547] Key type encrypted registered <6>[ 9.614555] AppArmor: AppArmor sha256 policy hashing enabled <5>[ 9.614678] Loading compiled-in module X.509 certificates <5>[ 9.615349] Loaded X.509 cert 'Build time autogenerated kernel key: 8fdcf0faecc404408795f50c9b1512501b759df0' <6>[ 9.615360] ima: Allocated hash algorithm: sha256 <6>[ 9.657226] ima: No architecture policies found <6>[ 9.657380] evm: Initialising EVM extended attributes: <6>[ 9.657386] evm: security.selinux <6>[ 9.657391] evm: security.SMACK64 <6>[ 9.657395] evm: security.SMACK64EXEC <6>[ 9.657400] evm: security.SMACK64TRANSMUTE <6>[ 9.657405] evm: security.SMACK64MMAP <6>[ 9.657410] evm: security.apparmor <6>[ 9.657414] evm: security.ima <6>[ 9.657419] evm: security.capability <6>[ 9.657423] evm: HMAC attrs: 0x1 <6>[ 9.660137] PM: Magic number: 5:46:792 <6>[ 9.660381] netconsole: network logging started <6>[ 9.661056] RAS: Correctable Errors collector initialized. <6>[ 9.661246] clk: Disabling unused clocks <6>[ 9.661914] PM: genpd: Disabling unused power domains <4>[ 9.662941] check access for rdinit=/init failed: -2, ignoring <6>[ 9.662949] md: Waiting for all devices to be available before autodetect <6>[ 9.662954] md: If you don't use raid, use raid=noautodetect <6>[ 9.662959] md: Autodetecting RAID arrays. <6>[ 9.662967] md: autorun ... <6>[ 9.662970] md: ... autorun DONE. <6>[ 9.714960] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 9.728682] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 9.728747] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 9.728773] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 9.728792] usb 4-1: Manufacturer: Realtek <6>[ 9.728808] usb 4-1: SerialNumber: 000001 <6>[ 9.737557] EXT4-fs (nvme0n1p2): mounted filesystem f122a966-f29a-437f-8b15-4f3e9c2e449d ro with ordered data mode. Quota mode: none. <6>[ 9.737660] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.738759] devtmpfs: mounted <6>[ 9.754688] Freeing unused decrypted memory: 2036K <6>[ 9.755995] Freeing unused kernel image (initmem) memory: 5704K <6>[ 9.756026] Write protecting the kernel read-only data: 36864k <6>[ 9.757546] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 9.758570] Freeing unused kernel image (rodata/data gap) memory: 720K <6>[ 9.764429] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 9.765146] Run /sbin/init as init process <7>[ 9.765150] with arguments: <7>[ 9.765151] /sbin/init <7>[ 9.765152] with environment: <7>[ 9.765153] HOME=/ <7>[ 9.765153] TERM=linux <7>[ 9.851754] systemd[1]: Inserted module 'autofs4' <7>[ 9.893129] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 9.893157] systemd[1]: Detected architecture x86-64. <7>[ 9.894912] systemd[1]: Hostname set to . <7>[ 10.161937] systemd[1]: Queued start job for default target graphical.target. <7>[ 10.204945] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 10.206899] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 10.208576] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 10.208834] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 10.209529] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 10.209651] systemd[1]: Expecting device dev-disk-by\x2duuid-30D0\x2d93C8.device - /dev/disk/by-uuid/30D0-93C8... <7>[ 10.209738] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 10.209823] systemd[1]: Reached target slices.target - Slice Units. <7>[ 10.209892] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 10.209961] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 10.210032] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 10.210286] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 10.210671] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 10.210967] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 10.211329] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 10.211615] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 10.211851] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 10.212168] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 10.212522] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 10.212833] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 10.213035] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.213357] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 10.213643] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 10.217058] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 10.219692] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 10.222521] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 10.225664] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 10.236202] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 10.239257] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 10.241893] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 10.245270] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 10.248102] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 10.253548] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 10.256291] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 10.258776] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 10.261311] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 10.263990] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 10.266712] systemd-journald[308]: Collecting audit messages is disabled. <7>[ 10.267212] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 10.267363] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 10.271634] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <7>[ 10.276419] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 10.276561] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 10.276629] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 10.279211] pstore: Using crash dump compression: deflate <7>[ 10.280579] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 10.280773] pstore: Registered efi_pstore as persistent store backend <6>[ 10.283588] fuse: init (API version 7.45) <7>[ 10.288297] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 10.453064] EXT4-fs (nvme0n1p2): re-mounted f122a966-f29a-437f-8b15-4f3e9c2e449d r/w. <6>[ 10.489701] Adding 8388604k swap on /swap.img. Priority:-2 extents:53 across:700645376k SS <7>[ 10.508051] systemd-journald[308]: Received client request to flush runtime journal. <7>[ 10.532846] systemd-journald[308]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 10.532855] systemd-journald[308]: Rotating system journal. <4>[ 11.257617] nvme nvme0: using unchecked data buffer <6>[ 11.345720] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 11.368837] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.383803] input: Intel HID events as /devices/platform/INTC1077:00/input/input3 <6>[ 11.393741] intel-hid INTC1077:00: platform supports 5 button array <6>[ 11.405156] input: Intel HID 5 button array as /devices/platform/INTC1077:00/input/input4 <3>[ 11.563433] int3472-tps68470 i2c-INT3472:0d: TPS68470 init error -121 <3>[ 11.563763] int3472-tps68470 i2c-INT3472:0d: probe with driver int3472-tps68470 failed with error -121 <6>[ 11.689565] ACPI: bus type thunderbolt registered <4>[ 11.693799] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcffff], which spans more than pnp 00:04 [mem 0xfedc0000-0xfedc7fff] <4>[ 11.693822] caller igen6_probe+0x190/0x9e0 [igen6_edac] mapping multiple BARs <6>[ 11.702823] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 11.717693] EDAC MC0: Giving out device to module igen6_edac controller Intel_client_SoC MC#0: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.723376] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 11.723381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 11.723615] pci 0000:00:08.0: Setting to D3hot <6>[ 11.725536] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_37xx_v0.0.bin, version: 20230726*MTL_CLIENT_SILICON-release*2101*ci_tag_mtl_pv_vpu_rc_20230726_2101*648a666b8b9 <6>[ 11.725542] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 11.728444] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 11.736178] pci 0000:00:05.0: Setting to D3hot <6>[ 11.743002] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 11.743205] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 11.746283] EDAC MC1: Giving out device to module igen6_edac controller Intel_client_SoC MC#1: DEV 0000:00:00.0 (INTERRUPT) <6>[ 11.747863] intel_pmc_core INT33A1:00: initialized <6>[ 11.749708] EDAC igen6: v2.5.1 <6>[ 11.781667] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 11.814880] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 11.838955] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 11.863304] idma64 idma64.3: Found Intel integrated DMA 64-bit <5>[ 11.881196] audit: type=1400 audit(1764607603.881:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=565 comm="apparmor_parser" <5>[ 11.881496] audit: type=1400 audit(1764607603.882:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=567 comm="apparmor_parser" <5>[ 11.881827] audit: type=1400 audit(1764607603.882:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=564 comm="apparmor_parser" <5>[ 11.882324] audit: type=1400 audit(1764607603.883:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=566 comm="apparmor_parser" <5>[ 11.882810] audit: type=1400 audit(1764607603.883:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=562 comm="apparmor_parser" <5>[ 11.883162] audit: type=1400 audit(1764607603.883:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=563 comm="apparmor_parser" <5>[ 11.883612] audit: type=1400 audit(1764607603.884:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=568 comm="apparmor_parser" <5>[ 11.886856] audit: type=1400 audit(1764607603.887:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=570 comm="apparmor_parser" <5>[ 11.888281] audit: type=1400 audit(1764607603.889:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=569 comm="apparmor_parser" <5>[ 11.891073] audit: type=1400 audit(1764607603.891:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=572 comm="apparmor_parser" <6>[ 11.903418] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 11.910072] i2c i2c-6: Successfully instantiated SPD at 0x54 <6>[ 11.911529] i2c i2c-6: Successfully instantiated SPD at 0x56 <6>[ 11.916591] usbcore: registered new device driver r8152-cfgselector <6>[ 11.935150] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer <6>[ 11.935159] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 11.935162] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 11.935164] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 11.949579] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 12.064117] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.162081] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) <6>[ 12.170843] intel_rapl_common: Found RAPL domain package <6>[ 12.176786] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 12.176794] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 12.176921] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 12.182514] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 12.183526] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.245639] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.300835] intel_rapl_msr: PL4 support detected. <6>[ 12.310866] intel_rapl_common: Found RAPL domain package <6>[ 12.310872] intel_rapl_common: Found RAPL domain core <6>[ 12.310875] intel_rapl_common: Found RAPL domain psys <6>[ 12.322965] r8152 4-1:1.0 eth1: v1.12.13 <6>[ 12.328310] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.328348] usbcore: registered new interface driver r8152 <6>[ 12.352993] usbcore: registered new interface driver cdc_ether <6>[ 12.356320] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.374053] usbcore: registered new interface driver r8153_ecm <4>[ 12.379991] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 12.381064] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 12.387054] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.397352] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 12.401364] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 12.401401] 0x000000000000-0x000002000000 : "BIOS" <6>[ 12.409696] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.415638] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 12.421799] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.441988] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth1 <6>[ 12.449900] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.456720] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.458835] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.459578] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.462934] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.463078] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.466343] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.467507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.469280] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.470312] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.471968] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.477748] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.478388] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.481828] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.482611] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.485382] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.486078] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.489182] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 12.489236] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.492158] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.494109] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.495659] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 12.498943] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.562623] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.565823] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.569837] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.573956] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.578145] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.583829] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.588873] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.593164] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.595546] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.599902] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.602788] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.606375] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.610604] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.614966] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.618336] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.622309] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.625480] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.628698] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.635092] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 12.641014] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 12.758105] block nvme0n1: No UUID available providing old NGUID <6>[ 12.862915] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 13.004371] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 13.114320] loop0: detected capacity change from 0 to 8 <6>[ 13.281471] Consider using thermal netlink events interface <6>[ 15.198572] r8152 4-1:1.0 enxe2015072f1a3: carrier on <3>[ 21.057411] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <6>[ 23.163383] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 23.165081] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 34.033824] systemd-journald[308]: /var/log/journal/a2b4beccbc4f433e8020d3144e250a00/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 49.073094] [IGT] i915_module_load: executing <4>[ 49.073145] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 49.107173] [IGT] i915_module_load: starting subtest load <4>[ 49.664455] ********************************************************** <4>[ 49.664456] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.664457] ** ** <4>[ 49.664458] ** trace_printk() being used. Allocating extra memory. ** <4>[ 49.664458] ** ** <4>[ 49.664459] ** This means that this is a DEBUG kernel and it is ** <4>[ 49.664460] ** unsafe for production use. ** <4>[ 49.664460] ** ** <4>[ 49.664461] ** If you see this message and you are not debugging ** <4>[ 49.664462] ** the kernel, report this immediately to your vendor! ** <4>[ 49.664462] ** ** <4>[ 49.664463] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 49.664464] ********************************************************** <5>[ 49.707170] Setting dangerous option force_probe - tainting kernel <6>[ 49.711455] i915 0000:00:02.0: [drm] Found meteorlake (device ID 7d55) integrated display version 14.00 stepping C0 <7>[ 49.712701] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.712951] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <7>[ 49.713117] i915 0000:00:02.0: [drm:intel_pch_detect [i915]] PCH not involved in display, using fake PCH type 1026 for south display <7>[ 49.713290] i915 0000:00:02.0: [drm:intel_dmc_wl_init [i915]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 49.713487] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 49.713660] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 49.713844] i915 0000:00:02.0: [drm:intel_wopcm_init_early [i915]] WOPCM: 2048K <7>[ 49.714066] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 49.714307] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 49.714490] i915 0000:00:02.0: [drm:intel_display_device_info_runtime_init [i915]] rawclk rate: 38400 kHz <7>[ 49.714960] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vdbox enable: 0000, instances: 0000 <7>[ 49.715105] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT0: vebox enable: 0000, instances: 0000 <7>[ 49.715628] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vdbox enable: 0005, instances: 0005 <7>[ 49.715764] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] GT1: vebox enable: 0001, instances: 0001 <7>[ 49.716205] i915 0000:00:02.0: [drm:ggtt_probe_common [i915]] Using direct GSM access <7>[ 49.716452] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 49.716583] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 49.716713] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 49.716842] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 49.717208] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 49.717549] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 49.717558] i915 0000:00:02.0: [drm:i915_gem_stolen_lmem_setup [i915]] Using direct DSM access <7>[ 49.717726] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000078400947 <7>[ 49.718265] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 131072K, usable: 126976K <7>[ 49.718536] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(0): system: 31513 MiB [mem 0x00000000-0x7b199bfff], io: n/a <7>[ 49.718675] i915 0000:00:02.0: [drm:intel_memory_regions_hw_probe [i915]] Memory region(6): stolen-local: 124 MiB [mem 0x00800000-0x083fffff], io: 124 MiB [mem 0x70800000-0x783fffff] <7>[ 49.719009] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x63e09018 <7>[ 49.719193] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 49.719354] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 49.719500] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 49.719645] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 49.719789] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 49.719952] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 49.720100] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM type: LPDDR5 <7>[ 49.720261] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 49.720413] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num QGV points 4 <7>[ 49.720567] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] Num PSF GV points 0 <7>[ 49.720727] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3200 tRP=64 tRDPRE=40 tRAS=136 tRCD=64 tRC=200 <7>[ 49.720893] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 49.721054] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 49.721212] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5600 tRP=104 tRDPRE=80 tRAS=240 tRCD=104 tRC=344 <7>[ 49.721381] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 0: num_planes=0 deratedbw=28913 peakbw: 51200 <7>[ 49.721533] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.721681] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.721828] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.721972] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 0: num_planes=0 deratedbw=35532 peakbw: 51200 <7>[ 49.722116] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.722267] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.722412] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.722559] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.722705] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.722852] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.722994] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.723136] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.723286] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.723429] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.723572] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.723715] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.723859] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.723999] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.724139] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.724285] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 0: num_planes=0 deratedbw=38000 peakbw: 51200 <7>[ 49.724428] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 49.724572] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 49.724716] i915 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 89600 <7>[ 49.725252] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 49.725409] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT METEORLAKE ", BDB version 253 <7>[ 49.725562] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 49.725710] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 49.725857] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 49.725998] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 49.726142] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 848) <7>[ 49.726294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 49.726454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 49.726611] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 49.726760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 49.726901] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 49.727042] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 98, min size 136) <7>[ 49.727183] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 49.727381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 49.727541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 49.727686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 49.727827] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 49.727973] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 49.728114] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.728267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 49.728423] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.728576] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 49.728728] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 49.728868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.729008] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.729146] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.729297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 49.729461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.729607] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 49.729756] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 49.729921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.730126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 49.730330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.730565] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 49.730809] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 49.730983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 49.731128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 49.731287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 49.731497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 49.731656] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 49.731674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 49.731840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 49.731990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 49.732139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 49.732714] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 49.733813] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 49.734904] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 49.735071] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM0 latency not provided <7>[ 49.735225] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM1 latency 85 (85.0 usec) <7>[ 49.735384] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM2 latency 86 (86.0 usec) <7>[ 49.735534] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM3 latency 101 (101.0 usec) <7>[ 49.735675] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM4 latency 102 (102.0 usec) <7>[ 49.735815] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] original WM5 latency 155 (155.0 usec) <7>[ 49.735956] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM0 latency 6 (6.0 usec) <7>[ 49.736096] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM1 latency 91 (91.0 usec) <7>[ 49.736247] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM2 latency 92 (92.0 usec) <7>[ 49.736392] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM3 latency 107 (107.0 usec) <7>[ 49.736529] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM4 latency 108 (108.0 usec) <7>[ 49.736666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] adjusted WM5 latency 161 (161.0 usec) <7>[ 49.738731] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 0: <7>[ 49.738904] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 49.739061] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 49.739213] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x8f004 = 0x42c0408 (EVT_HTP) <7>[ 49.739377] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL) <7>[ 49.739527] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x8f008 = 0x534052f4 (EVT_HTP) <7>[ 49.739883] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 1: <7>[ 49.740053] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f074 = 0x96fc0 <7>[ 49.740197] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.740360] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f004 = 0x212c20f4 (EVT_HTP) <7>[ 49.740503] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.740646] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f008 = 0x222021e8 (EVT_HTP) <7>[ 49.740818] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.740989] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f00c = 0x23f422dc (EVT_HTP) <7>[ 49.741148] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.741340] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f010 = 0x26ec26c0 (EVT_HTP) <7>[ 49.741487] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 2: <7>[ 49.741636] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f474 = 0x9efc0 <7>[ 49.741807] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling) <7>[ 49.741969] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f404 = 0xa618a5e0 (EVT_HTP) <7>[ 49.742109] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling) <7>[ 49.742266] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f408 = 0xa70ca6d4 (EVT_HTP) <7>[ 49.742423] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.742583] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[6]: 0x5f40c = 0xa8e0a7c8 (EVT_HTP) <7>[ 49.742757] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[7]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.742864] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 49.742902] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[8]: 0x5f410 = 0xabd8abac (EVT_HTP) <7>[ 49.743060] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 3: <7>[ 49.743201] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5f874 = 0x53fc0 <7>[ 49.743355] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.743501] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5f80c = 0x24a02388 (EVT_HTP) <7>[ 49.743649] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.743791] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5f810 = 0x2798276c (EVT_HTP) <7>[ 49.743939] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] DMC 4: <7>[ 49.744078] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[0]: 0x5fc74 = 0x5afc0 <7>[ 49.744217] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling) <7>[ 49.744374] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[2]: 0x5fc0c = 0x94a09388 (EVT_HTP) <7>[ 49.744520] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[3]: 0x5fc40 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 49.744665] i915 0000:00:02.0: [drm:dmc_load_work_fn [i915]] mmio[4]: 0x5fc10 = 0x9798976c (EVT_HTP) <7>[ 49.748751] i915 0000:00:02.0: [drm:intel_cdclk_read_hw [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 49.748958] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 49.749150] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 1305600 kHz <7>[ 49.750538] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:265:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 49.752635] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:265:DDI A/PHY A] <7>[ 49.753028] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 49.753208] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 49.753391] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 49.753551] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <6>[ 49.753639] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23) <7>[ 49.753709] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 49.753859] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 49.754009] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 49.754158] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 49.754505] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 49.754820] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:265:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 49.755048] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.755200] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.755370] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.755532] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.755689] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 49.755966] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 49.756378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 49.757418] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD on <7>[ 49.757707] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 49.759134] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 49.759528] i915 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 49.760099] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 04 00 <7>[ 49.760841] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 49.761301] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 49.762587] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 49.768330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 49.768339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 49.768343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 49.768391] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:266:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 49.768840] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:266:eDP-1] Performing OUI wait (0 ms) <7>[ 49.769312] i915 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [i915]] [CONNECTOR:266:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 49.769487] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:266:eDP-1] DRRS type: none <7>[ 49.769726] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:266:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 49.769924] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:266:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 49.770117] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 49.770285] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 49.770430] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 49.770591] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 49.770749] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 49.771010] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 49.771287] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:274:DDI B/PHY B] Using AUX CH B (VBT) <7>[ 49.771454] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:274:DDI B/PHY B] <7>[ 49.771910] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:274:DDI B/PHY B] <7>[ 49.772047] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:274:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 49.772377] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:292:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 49.772669] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.772956] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:292:DDI TC1/PHY TC1] <7>[ 49.773258] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:301:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 49.773480] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 49.773813] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 49.773966] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:301:DDI TC2/PHY TC2] <7>[ 49.774106] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:301:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 49.774325] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:305:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 49.774550] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.774772] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:305:DDI TC3/PHY TC3] <7>[ 49.775058] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:314:DDI TC4/PHY TC4] Using AUX CH USBC4 (VBT) <7>[ 49.775274] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 49.775501] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:314:DDI TC4/PHY TC4] <7>[ 49.776435] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 49.776799] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:147:pipe B] hw state readout: disabled <7>[ 49.777105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:205:pipe C] hw state readout: disabled <7>[ 49.777418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:263:pipe D] hw state readout: disabled <7>[ 49.777601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 49.777783] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 49.777955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 49.778105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 49.778263] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 49.778413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 49.778571] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 1B] hw state readout: disabled, pipe B <7>[ 49.778729] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:plane 2B] hw state readout: disabled, pipe B <7>[ 49.778888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 3B] hw state readout: disabled, pipe B <7>[ 49.779035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:121:plane 4B] hw state readout: disabled, pipe B <7>[ 49.779182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:131:plane 5B] hw state readout: disabled, pipe B <7>[ 49.779337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:141:cursor B] hw state readout: disabled, pipe B <7>[ 49.779491] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:149:plane 1C] hw state readout: disabled, pipe C <7>[ 49.779655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:159:plane 2C] hw state readout: disabled, pipe C <7>[ 49.779816] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 3C] hw state readout: disabled, pipe C <7>[ 49.779961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:179:plane 4C] hw state readout: disabled, pipe C <7>[ 49.780105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:189:plane 5C] hw state readout: disabled, pipe C <7>[ 49.780257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:199:cursor C] hw state readout: disabled, pipe C <7>[ 49.780405] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:207:plane 1D] hw state readout: disabled, pipe D <7>[ 49.780579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:217:plane 2D] hw state readout: disabled, pipe D <7>[ 49.780752] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:227:plane 3D] hw state readout: disabled, pipe D <7>[ 49.780916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:237:plane 4D] hw state readout: disabled, pipe D <7>[ 49.781064] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:247:plane 5D] hw state readout: disabled, pipe D <7>[ 49.781212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:257:cursor D] hw state readout: disabled, pipe D <7>[ 49.782115] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 49.782314] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 49.782482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:274:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 49.782656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:276:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.782812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.782961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.783100] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.783290] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.783438] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:292:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 49.783589] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:294:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.783739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:295:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.783883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:296:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.784016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:297:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.784197] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.784370] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:301:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 49.784526] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.784669] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:305:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 49.784808] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:307:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.784946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:308:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.785084] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:309:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.785221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:310:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.785380] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 49.785532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:314:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 49.785682] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:316:DP-MST A] hw state readout: disabled, pipe A <7>[ 49.785831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:317:DP-MST B] hw state readout: disabled, pipe B <7>[ 49.785975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:318:DP-MST C] hw state readout: disabled, pipe C <7>[ 49.786108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:319:DP-MST D] hw state readout: disabled, pipe D <7>[ 49.786883] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 49.787034] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 49.787186] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.787336] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 49.787495] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.787660] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.787817] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.787967] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 49.788211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:266:eDP-1] hw state readout: enabled <7>[ 49.788390] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:275:DP-1] hw state readout: disabled <7>[ 49.788566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:287:HDMI-A-1] hw state readout: disabled <7>[ 49.788739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:293:DP-2] hw state readout: disabled <7>[ 49.788895] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:302:HDMI-A-2] hw state readout: disabled <7>[ 49.789051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:306:DP-3] hw state readout: disabled <7>[ 49.789206] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:315:DP-4] hw state readout: disabled <7>[ 49.789423] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:33:plane 1A] min_cdclk 256910 kHz <7>[ 49.789569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 49.789715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 49.789852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 49.789987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 49.790122] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 49.790264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:89:pipe A] min_cdclk 256910 kHz <7>[ 49.790399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 1B] min_cdclk 0 kHz <7>[ 49.790538] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:101:plane 2B] min_cdclk 0 kHz <7>[ 49.790678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:111:plane 3B] min_cdclk 0 kHz <7>[ 49.790818] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:121:plane 4B] min_cdclk 0 kHz <7>[ 49.790955] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:131:plane 5B] min_cdclk 0 kHz <7>[ 49.791090] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:141:cursor B] min_cdclk 0 kHz <7>[ 49.791225] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:147:pipe B] min_cdclk 0 kHz <7>[ 49.791397] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:149:plane 1C] min_cdclk 0 kHz <7>[ 49.791536] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:159:plane 2C] min_cdclk 0 kHz <7>[ 49.791674] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 3C] min_cdclk 0 kHz <7>[ 49.791811] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:179:plane 4C] min_cdclk 0 kHz <7>[ 49.791944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:189:plane 5C] min_cdclk 0 kHz <7>[ 49.792077] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:199:cursor C] min_cdclk 0 kHz <7>[ 49.792209] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:205:pipe C] min_cdclk 0 kHz <7>[ 49.792354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:207:plane 1D] min_cdclk 0 kHz <7>[ 49.792490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:217:plane 2D] min_cdclk 0 kHz <7>[ 49.792625] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:227:plane 3D] min_cdclk 0 kHz <7>[ 49.792759] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:237:plane 4D] min_cdclk 0 kHz <7>[ 49.792894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:247:plane 5D] min_cdclk 0 kHz <7>[ 49.793031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:257:cursor D] min_cdclk 0 kHz <7>[ 49.793166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:263:pipe D] min_cdclk 0 kHz <7>[ 49.793510] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 49.793654] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:147:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.793795] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:205:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.793936] i915 0000:00:02.0: [drm:skl_wm_get_hw_state [i915]] [CRTC:263:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 49.794077] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 49.794241] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe B data rate 0 num active planes 0 <7>[ 49.794398] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe C data rate 0 num active planes 0 <7>[ 49.794552] i915 0000:00:02.0: [drm:intel_bw_update_hw_state [i915]] pipe D data rate 0 num active planes 0 <7>[ 49.794853] i915 0000:00:02.0: [drm:intel_cmtg_sanitize [i915]] CMTG readout: CMTG A: enabled, CMTG B: n/a, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 49.795179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 49.795340] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 49.795491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 49.795643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 49.795793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 49.795940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 49.796084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 49.796228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 49.796381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 49.796527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 49.796671] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 49.796815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 49.796957] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 49.797098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 49.797243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 49.797389] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 49.797535] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: no, vmin: 0, vmax: 0, flipline: 0, pipeline full: 0, guardband: 0 vsync start: 0, vsync end: 0 <7>[ 49.797681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 0, vmax vblank: 0, vmin vtotal: 0, vmax vtotal: 0 <7>[ 49.797825] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.797967] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.798109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.798254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 49.798399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 49.798542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 49.798684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 49.798827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 49.798969] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 49.799109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 49.799255] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 49.799400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 49.799542] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 49.799682] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 49.799822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 49.799962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 49.800102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 49.800312] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 49.800457] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 49.800599] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 49.800741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 49.800881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 49.801021] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.801162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.801315] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.801455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.801595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.801735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 49.801875] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.802016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.802157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 49.802306] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 49.802450] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 49.802591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:147:pipe B] enable: no [setup_hw_state] <7>[ 49.802732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:205:pipe C] enable: no [setup_hw_state] <7>[ 49.802872] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:263:pipe D] enable: no [setup_hw_state] <7>[ 49.803012] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] TBT PLL enabled but not in use, disabling <7>[ 49.803362] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 49.803521] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Using dma_addr=0x0000000000800000, based on initial plane programming <7>[ 49.803681] i915 0000:00:02.0: [drm:_i915_gem_object_stolen_init [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, size=0x00000000013c7000 <7>[ 49.804157] i915 0000:00:02.0: [drm:intel_initial_plane_config [i915]] Initial plane fb bound to 0x0 in the ggtt (original 0xfec00000) <7>[ 49.817203] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 49.823797] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 49.823961] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [13c7000, fee00000] <7>[ 49.824106] i915 0000:00:02.0: [drm:nop_init_clock_gating [i915]] No clock gating settings or workarounds applied. <7>[ 49.824258] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 49.824407] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 49.824552] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 49.824700] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 GT workarounds on global <7>[ 49.827012] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 engine workarounds on rcs'0 <7>[ 49.827180] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 whitelist workarounds on rcs'0 <7>[ 49.827516] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 7 context workarounds on rcs'0 <7>[ 49.828353] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 engine workarounds on bcs'0 <7>[ 49.828510] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 2 context workarounds on bcs'0 <7>[ 49.828895] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 5 engine workarounds on ccs'0 <7>[ 49.829044] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT0: Initialized 1 context workarounds on ccs'0 <7>[ 49.830142] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 49.830340] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 49.830513] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 49.849947] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x13c804f <7>[ 49.850136] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x410800 <7>[ 49.850315] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 49.850464] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 49.850612] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x2f92 <7>[ 49.850759] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 49.850909] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 49.851056] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 49.851200] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 49.851358] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 49.851501] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 49.851642] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 49.851782] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 49.851923] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 49.852857] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <7>[ 49.862334] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 8ms, freq = 1700MHz -> 2250MHz vs 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 49.863273] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 49.864853] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 49.864855] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 49.865308] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 49.865636] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 49.866398] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT0: GUC: Querying HW config table: size = 752, offset = 0x01FFC000 <7>[ 49.873606] i915 0000:00:02.0: [drm:debug_dump_steering [i915]] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 49.873785] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 5 GT workarounds on global <7>[ 49.874705] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'0 <7>[ 49.874872] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'0 <7>[ 49.875719] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vcs'2 <7>[ 49.875877] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vcs'2 <7>[ 49.876490] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on vecs'0 <7>[ 49.876642] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on vecs'0 <7>[ 49.877360] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 engine workarounds on other'6 <7>[ 49.877525] i915 0000:00:02.0: [drm:wa_init_finish [i915]] GT1: Initialized 1 context workarounds on other'6 <7>[ 49.879296] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 49.879492] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 49.879667] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 49.900823] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0x1ffd04f <7>[ 49.901000] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x400000 <7>[ 49.901155] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 49.901314] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 49.901462] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x47fc <7>[ 49.901609] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 49.901753] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 49.901895] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 49.902035] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 49.902175] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 49.902325] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 49.902469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 49.902608] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 49.902746] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 49.902885] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <7>[ 49.905100] i915 0000:00:02.0: [drm:i915_gsc_proxy_component_bind [i915]] GT1: GSC proxy mei component bound <6>[ 49.905334] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops i915_gsc_proxy_component_ops [i915]) <6>[ 49.905719] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.53.0 <6>[ 49.905721] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.4 <7>[ 49.920324] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 12ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 49.920603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <7>[ 49.929263] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 8ms, freq = 1300MHz -> 1300MHz vs 1300MHz, status = 0x0000C1DC, count = 0, ret = 0 <6>[ 49.929436] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 49.930358] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 49.930360] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 49.930545] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 49.930774] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 0, offset = 0x00000000 <7>[ 49.931563] i915 0000:00:02.0: [drm:__guc_action_get_hwconfig [i915]] GT1: GUC: Querying HW config table: size = 752, offset = 0xFEDA5000 <7>[ 49.938608] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed rcs'0 to rcs0 <7>[ 49.939066] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed bcs'0 to bcs0 <7>[ 49.939423] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'0 to vcs0 <7>[ 49.939744] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vcs'2 to vcs1 <7>[ 49.940178] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed vecs'0 to vecs0 <7>[ 49.940447] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed ccs'0 to ccs0 <7>[ 49.940587] i915 0000:00:02.0: [drm:intel_engines_driver_register [i915]] renamed other'6 to other0 <6>[ 49.942627] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized <7>[ 49.943986] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 49.944153] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 49.944343] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 49.944498] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 49.944648] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 49.944796] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 0: start 0x98008 <7>[ 49.944942] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 1: start 0x98108 <7>[ 49.945084] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 2: start 0x98208 <7>[ 49.945228] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 3: start 0x98308 <7>[ 49.945381] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:147:pipe B] FQ 4: start 0x983c8 <7>[ 49.945525] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 0: start 0x52008 <7>[ 49.945668] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 1: start 0x52108 <7>[ 49.945810] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 2: start 0x52208 <7>[ 49.945954] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 3: start 0x52308 <7>[ 49.946097] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:205:pipe C] FQ 4: start 0x523c8 <7>[ 49.946248] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 0: start 0x59008 <7>[ 49.946391] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 1: start 0x59108 <7>[ 49.946534] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 2: start 0x59208 <7>[ 49.946676] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 3: start 0x59308 <7>[ 49.946818] i915 0000:00:02.0: [drm:intel_flipq_init [i915]] [CRTC:263:pipe D] FQ 4: start 0x593c8 <7>[ 49.947402] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 49.947560] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 49.947718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2048) -> ( 0 - 4001), size 2048 -> 4001 <7>[ 49.947863] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 49.948006] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm <7>[ 49.948148] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 49.948357] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 <7>[ 49.948507] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 <7>[ 49.948691] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:147:pipe B] enable: no [fastset] <7>[ 49.948854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:205:pipe C] enable: no [fastset] <7>[ 49.949014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:263:pipe D] enable: no [fastset] <7>[ 49.950589] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 42393600 bytes of contiguous stolen space for FBC, limit: 1 <7>[ 49.950756] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7>[ 49.950964] i915 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [i915]] Changing mbus joined: no -> yes (pipe: A) <7>[ 49.951128] i915 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [i915]] Updating dbuf ratio to 4 (mbus joined: yes) <7>[ 49.959877] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:147:pipe B] <7>[ 49.960289] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:205:pipe C] <7>[ 49.960626] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:263:pipe D] <7>[ 49.964283] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:266:eDP-1] adding connector to sysfs <7>[ 49.966827] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:266:eDP-1] backlight device intel_backlight registered <7>[ 49.967018] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:266:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 49.967190] i915 0000:00:02.0: [drm:intel_panel_register [i915]] [CONNECTOR:266:eDP-1] Panel prepare <7>[ 49.967637] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 49.968894] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:266:eDP-1] generating connector hotplug event <7>[ 49.968956] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:275:DP-1] adding connector to sysfs <7>[ 49.969331] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 49.970002] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:275:DP-1] generating connector hotplug event <7>[ 49.970034] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:287:HDMI-A-1] adding connector to sysfs <7>[ 49.970339] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:287:HDMI-A-1] generating connector hotplug event <7>[ 49.970372] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:293:DP-2] adding connector to sysfs <7>[ 49.970709] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 49.971322] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:293:DP-2] generating connector hotplug event <7>[ 49.971356] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:302:HDMI-A-2] adding connector to sysfs <7>[ 49.971637] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:302:HDMI-A-2] generating connector hotplug event <7>[ 49.971666] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:306:DP-3] adding connector to sysfs <7>[ 49.972009] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 49.972591] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:306:DP-3] generating connector hotplug event <7>[ 49.972622] i915 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:315:DP-4] adding connector to sysfs <7>[ 49.972989] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 49.973732] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:315:DP-4] generating connector hotplug event <6>[ 49.973761] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 <7>[ 49.975984] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 49.987195] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 49.990214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 49.991277] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 49.991500] i915 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 49.992069] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 49.992074] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 49.992798] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] found possible fb from [PLANE:33:plane 1A] <7>[ 49.992994] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:147:pipe B] not active, skipping <7>[ 49.993159] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:205:pipe C] not active, skipping <7>[ 49.993348] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:263:pipe D] not active, skipping <7>[ 49.993501] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] checking [PLANE:33:plane 1A] for BIOS fb <7>[ 49.993647] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:89:pipe A] area: 2880x1800, bpp: 32, size: 20736000 <7>[ 49.993791] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] fb big enough [PLANE:33:plane 1A] (20738048 >= 20736000) <7>[ 49.993933] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:147:pipe B] not active, skipping <7>[ 49.994084] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:205:pipe C] not active, skipping <7>[ 49.994318] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] [CRTC:263:pipe D] not active, skipping <7>[ 49.994524] i915 0000:00:02.0: [drm:intel_fbdev_setup [i915]] using BIOS fb for initial console <6>[ 49.994886] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915]) <7>[ 49.994974] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 49.995608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 49.995791] i915 0000:00:02.0: [drm:intel_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 49.997094] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 49.999934] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:275:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.000104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 50.000458] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9a01 <7>[ 50.001294] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.001305] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.004206] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:287:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.004371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 50.004858] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.005116] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:293:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.005289] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 50.005654] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 50.009788] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:302:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.009978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 50.010252] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.010498] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:306:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.010676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 50.010967] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 50.011178] i915 0000:00:02.0: [drm:intel_hotplug_detect_connector [i915]] [CONNECTOR:315:DP-4] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.011337] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.011380] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 50.011395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 50.012720] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 50.013323] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.013522] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 50.013730] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 50.013975] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 50.013980] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 50.013984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 50.014007] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 50.014181] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.014346] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.015366] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] status updated from unknown to connected <7>[ 50.015717] i915 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.016376] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 50.016430] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.016436] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 50.016442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 50.020691] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 50.020702] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 50.020707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 50.024988] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 50.024995] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 50.024999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 50.025610] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 50.025617] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 50.025621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 50.029932] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 50.029939] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 50.029943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 50.030240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 50.030244] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 50.030247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 50.030538] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 50.030541] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 50.030545] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 50.030547] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 50.030550] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 50.030552] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 50.030554] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 50.030556] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 50.030686] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 50.030707] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 50.030710] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 50.030724] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 50.030831] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 50.030853] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] re-using BIOS fb <7>[ 50.031073] i915 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [i915]] allocated 2880x1800 fb: 0x00000000 <6>[ 50.032473] fbcon: i915drmfb (fb0) is primary device <7>[ 50.033527] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:266:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 50.033731] i915 0000:00:02.0: [drm:intel_dp_compute_config_limits [i915]] [ENCODER:265:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 513820 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 50.033896] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp input 30 compressed 0.0000 link rate required 1926825 available 2160000 <7>[ 50.034188] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 50.034379] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:265:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 50.034539] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 50.034707] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 50.034869] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] expected: <7>[ 50.035054] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.035227] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 50.035409] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 50.035574] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.035738] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.035915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 50.036079] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.036246] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.036411] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 50.036571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 50.036728] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] found: <7>[ 50.036903] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.037065] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.037230] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.037396] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.037564] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] c10pll_rawhw_state: <7>[ 50.037726] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.037965] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.038125] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.038300] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.038472] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.038640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.038835] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 50.039012] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 50.039199] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1) <7>[ 50.039369] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 50.039538] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 50.039950] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 50.040178] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 -> 2, 16, 16, 19, 19, 28, 0, 0, 0, 3, 0 <7>[ 50.040385] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 49, 385, 385, 457, 457, 673, 0, 0, 0, 73, 0 -> 49, 385, 385, 457, 457, 673, 0, 0, 63, 73, 87 <7>[ 50.040545] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 55, 425, 425, 504, 504, 742, 0, 0, 0, 82, 0 -> 55, 425, 425, 504, 504, 742, 0, 0, 64, 82, 88 <7>[ 50.040734] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.040893] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.041050] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.041207] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.041410] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.041564] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.041744] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.041935] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.042108] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.042274] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.042445] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.042637] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.042792] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.042951] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.043116] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.043270] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.043413] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 50.043549] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.043702] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.043845] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 50.044077] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 28913 required 2159 qgv_peak_bw: 51200 <7>[ 50.044532] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.044984] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.045603] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 51200 <7>[ 50.045959] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 51200 for required data rate: 2159 <7>[ 50.046633] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 50.046808] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 50.047001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 50.047182] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.047363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 50.047566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 50.047721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.047882] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7>[ 50.048040] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 50.048196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 50.048349] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.048507] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] fec: disabled, enhanced framing: enabled <7>[ 50.048664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sdp split: disabled <7>[ 50.048840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 50.049007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] minimum HBlank: 0 <7>[ 50.049162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 50.049324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] DP SDP: VSC, revision 4, length 14 <7>[ 50.049501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pixelformat: RGB <7>[ 50.049656] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] colorimetry: sRGB <7>[ 50.049815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bpc: 0 <7>[ 50.049964] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dynamic range: VESA range <7>[ 50.050131] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] content type: Not defined <7>[ 50.050299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 1 <7>[ 50.050455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 50.050605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1878, vmax: 1878, flipline: 1878, pipeline full: 0, guardband: 76 vsync start: 75, vsync end: 69 <7>[ 50.050767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1878, vmax vtotal: 1878 <7>[ 50.050808] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.050935] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.051024] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.051098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 50.051200] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.051240] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.051370] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port A <7>[ 50.051393] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 50.051552] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 50.051546] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.051721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820, min cdclk 256910 <7>[ 50.051735] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.051887] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 50.051918] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.052054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.052103] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port B <7>[ 50.052202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.052265] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.052369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.052418] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.052516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 50.052582] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.052664] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_hw_state: clock: 540000, fracen: yes, <7>[ 50.052744] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port C <7>[ 50.052809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] quot: 40960, rem: 0, den: 1, <7>[ 50.052899] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.052951] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 50.053061] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.053099] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] c10pll_rawhw_state: <7>[ 50.053224] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.053253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] tx: 0x10, cmn: 0x21 <7>[ 50.053381] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port D <7>[ 50.053404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 50.053544] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.053557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 50.053713] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 50.053713] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.053867] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 50.053879] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.054029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 50.054050] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port E <7>[ 50.054194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 50.054348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.054497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.054652] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.054805] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.054959] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.054954] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.055116] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.055155] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.055285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.055336] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.055443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.055521] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port F <7>[ 50.055594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.055679] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.055740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.055832] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.055885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.055987] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.056031] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 50.056142] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port G <7>[ 50.056178] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:324] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 50.056324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 50.056325] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.056471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 50.056511] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.056623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 50.056767] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 50.056811] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.056909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 50.056958] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port H <7>[ 50.057052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 50.057115] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.057204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 50.057261] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.057415] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.057568] i915 0000:00:02.0: [drm:intel_audio_component_get_eld [i915]] Not valid for port I <7>[ 50.060530] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 50.063840] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 50.064580] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 50.065044] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 50.065614] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <6>[ 50.081860] i915 0000:00:02.0: [drm] GT1: Loaded GSC firmware i915/mtl_gsc_1.bin (cv1.0, r102.1.15.1926, svn 1) <7>[ 50.102424] i915 0000:00:02.0: [drm:intel_huc_wait_for_auth_complete [i915]] GT1: HuC: auth took 0ms, freq = 1000MHz -> 1000MHz vs 1300MHz, status = 0x00116C68, count = 0, ret = 0 <6>[ 50.102659] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for all workloads <7>[ 50.259979] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:266:eDP-1] set backlight PWM = 0 <7>[ 50.261151] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 50.272143] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x00000089, pins 0x00000010, long 0x00000000 <7>[ 50.272284] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turn panel power off <7>[ 50.272848] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - short <7>[ 50.272938] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 50.273423] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 50.325371] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.326059] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - long <7>[ 50.326474] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 50.331884] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.333144] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring short hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 50.333161] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 50.333809] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 50.335558] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7>[ 50.336322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 50.337236] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7>[ 50.337695] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 50.338048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DDI A/PHY A] <7>[ 50.338439] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:274:DDI B/PHY B] <7>[ 50.338688] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:276:DP-MST A] <7>[ 50.338864] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST B] <7>[ 50.339013] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST C] <7>[ 50.339152] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST D] <7>[ 50.339291] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:292:DDI TC1/PHY TC1] <7>[ 50.339448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:294:DP-MST A] <7>[ 50.339591] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:295:DP-MST B] <7>[ 50.339731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:296:DP-MST C] <7>[ 50.339869] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:297:DP-MST D] <7>[ 50.340007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:301:DDI TC2/PHY TC2] <7>[ 50.340145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:305:DDI TC3/PHY TC3] <7>[ 50.340306] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DP-MST A] <7>[ 50.340440] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:308:DP-MST B] <7>[ 50.340575] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:309:DP-MST C] <7>[ 50.340710] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:310:DP-MST D] <7>[ 50.340846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:314:DDI TC4/PHY TC4] <7>[ 50.340981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:316:DP-MST A] <7>[ 50.341125] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DP-MST B] <7>[ 50.341301] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:318:DP-MST C] <7>[ 50.341446] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST D] <7>[ 50.341673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 50.343097] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 50.343334] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7>[ 50.344874] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turn panel power on <7>[ 50.345107] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7>[ 50.565443] i915 0000:00:02.0: [drm:gsc_work [i915]] GT1: GSC Proxy initialized <7>[ 50.822401] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 50.873731] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 50.874484] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 50.875270] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 50.906212] i915 0000:00:02.0: [drm:icp_irq_handler [i915]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7>[ 50.906868] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:265:DDI A/PHY A] - long <7>[ 50.907449] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 50.908033] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP [ENCODER:265:DDI A/PHY A] <7>[ 51.024075] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.024078] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.024078] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.024372] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 51.083967] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 51.085376] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.086116] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 51.089731] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 51.090803] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 51.091471] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 51.092585] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 51.093323] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 51.094258] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 51.094401] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 51.095737] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 51.095872] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:266:eDP-1][ENCODER:265:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 51.096499] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 51.096784] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 51.096930] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 51.097146] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:266:eDP-1] set backlight PWM = 192000 <7>[ 51.107930] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 51.109638] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:266:eDP-1] <7>[ 51.109879] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7>[ 51.111317] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 51.112697] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initiate pmdemand request values: (0x2000071 0x13421c72) <7>[ 51.113155] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=9600/192000 <7>[ 51.113372] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:266:eDP-1] set backlight level = 13892 <6>[ 51.113704] Console: switching to colour frame buffer device 180x56 <6>[ 51.131449] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 51.131469] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display version: 14 <7>[ 51.131666] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: display stepping: C0 <7>[ 51.131827] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: cursor_needs_physical: no <7>[ 51.132005] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_crawl: yes <7>[ 51.132165] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_cdclk_squash: yes <7>[ 51.132314] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ddi: yes <7>[ 51.132460] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dp_mst: yes <7>[ 51.132606] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsb: yes <7>[ 51.132752] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_fpga_dbg: yes <7>[ 51.132941] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_gmch: no <7>[ 51.133087] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hotplug: yes <7>[ 51.133233] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hti: no <7>[ 51.133378] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_ipc: yes <7>[ 51.133521] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_overlay: no <7>[ 51.133665] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr: yes <7>[ 51.133851] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_psr_hw_tracking: no <7>[ 51.134069] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: overlay_needs_physical: no <7>[ 51.134228] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: supports_tv: no <7>[ 51.134379] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_hdcp: yes <7>[ 51.134528] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dmc: yes <7>[ 51.134670] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: has_dsc: yes <7>[ 51.134823] i915 0000:00:02.0: [drm:intel_display_driver_register [i915]] i915 display info: rawclk rate: 38400 kHz <7>[ 51.135286] [drm:intel_dsm_detect.isra.0 [i915]] no _DSM method for intel device <7>[ 51.135449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 51.135787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 51.135984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 51.136261] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x0) gen=12 <7>[ 51.136398] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics version: 12.71 <7>[ 51.136532] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media version: 13 <7>[ 51.136661] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: graphics stepping: B0 <7>[ 51.136809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: media stepping: C0 <7>[ 51.136936] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gt: 0 <7>[ 51.137061] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: memory-regions: 0x41 <7>[ 51.137181] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: page-sizes: 0x211000 <7>[ 51.137307] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: platform: METEORLAKE <7>[ 51.137429] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-size: 48 <7>[ 51.137549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: ppgtt-type: 2 <7>[ 51.137681] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: dma_mask_size: 46 <7>[ 51.137800] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_mobile: no <7>[ 51.137916] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: require_force_probe: no <7>[ 51.138033] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: is_dgfx: no <7>[ 51.138150] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64bit_reloc: yes <7>[ 51.138266] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_64k_pages: no <7>[ 51.138382] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: gpu_reset_clobbers_display: no <7>[ 51.138499] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_reset_engine: yes <7>[ 51.138614] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_3d_pipeline: yes <7>[ 51.138746] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_flat_ccs: no <7>[ 51.138861] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_global_mocs: yes <7>[ 51.138976] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gmd_id: yes <7>[ 51.139092] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_gt_uc: yes <7>[ 51.139206] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_pxp: no <7>[ 51.139320] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_heci_gscfi: no <7>[ 51.139435] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_deprivilege: yes <7>[ 51.139549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_guc_tlb_invalidation: yes <7>[ 51.139677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_ccs_read: no <7>[ 51.139852] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_l3_dpf: no <7>[ 51.139968] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_llc: no <7>[ 51.140084] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_contexts: yes <7>[ 51.140199] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_logical_ring_elsq: yes <7>[ 51.140313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_media_ratio_mode: no <7>[ 51.140427] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_mslice_steering: no <7>[ 51.140542] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_bpc_reporting: yes <7>[ 51.140676] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oa_slice_contrib_limits: yes <7>[ 51.140809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_oam: yes <7>[ 51.140926] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_one_eu_per_fuse_bit: no <7>[ 51.141040] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pxp: yes <7>[ 51.141154] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6: yes <7>[ 51.141331] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.141340] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.141282] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rc6p: no <7>[ 51.141411] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_rps: yes <7>[ 51.141549] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 51.141549] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_runtime_pm: yes <7>[ 51.141557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 51.141677] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_snoop: yes <7>[ 51.141805] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_coherent_ggtt: no <7>[ 51.141932] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: tuning_thread_rr_after_dep: no <7>[ 51.142058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: unfenced_needs_alignment: no <7>[ 51.142184] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: hws_needs_physical: no <7>[ 51.142313] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has_pooled_eu: no <7>[ 51.142302] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.142444] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: iommu: enabled <7>[ 51.142597] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 400003 <7>[ 51.142723] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.142794] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.142851] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,000000ff <7>[ 51.142958] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.142976] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,000000ff <7>[ 51.143094] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.143106] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.143210] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.143329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.143333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 51.143339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 51.143327] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.143358] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 51.143441] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.143548] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.143578] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.143696] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: available engines: 4041400 <7>[ 51.143706] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.143814] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: subslice total: 8 <7>[ 51.143930] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: geometry dss mask=00000000,0000ff00 <7>[ 51.144058] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: compute dss mask=00000000,0000ff00 <7>[ 51.144189] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU total: 128 <7>[ 51.144319] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: EU per subslice: 16 <7>[ 51.144462] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has slice power gating: no <7>[ 51.144569] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 51.144582] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has subslice power gating: no <7>[ 51.144689] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.144693] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 51.144707] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] device info: has EU power gating: no <7>[ 51.144696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <6>[ 51.144840] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 51.144840] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 51.144841] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 51.148881] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 51.148887] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 51.148890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 51.153017] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 51.153023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 51.153026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 51.153461] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.153690] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 51.153696] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 51.153699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 51.154016] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) pin assignment: - max lanes: 4 <7>[ 51.158163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 51.158168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 51.158171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 51.158404] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.158609] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 51.158613] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 51.158615] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 51.158838] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 51.159069] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 51.159073] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 51.159076] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 51.159079] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 51.159081] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 51.159083] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 51.159085] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 51.159087] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 51.159187] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.159201] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 51.159203] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.159243] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.163942] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.185802] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 51.185820] i915 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 51.186987] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] <7>[ 51.187008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:266:eDP-1] <7>[ 51.188780] i915 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 51.189273] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 51.189461] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 51.189643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 51.189955] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 51.189961] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD monitor <7>[ 51.189967] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:266:eDP-1] ELD size 20, SAD count 0 <7>[ 51.189992] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] VRR capable: no <7>[ 51.190164] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 51.190335] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:266:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 51.191243] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:266:eDP-1] probed modes: <7>[ 51.191250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 51.191253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] <7>[ 51.191256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:275:DP-1] <7>[ 51.195395] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:275:DP-1] disconnected <7>[ 51.195400] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] <7>[ 51.195403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:287:HDMI-A-1] <7>[ 51.199509] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:287:HDMI-A-1] disconnected <7>[ 51.199513] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] <7>[ 51.199516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:293:DP-2] <7>[ 51.199910] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:293:DP-2] disconnected <7>[ 51.199914] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] <7>[ 51.199916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:302:HDMI-A-2] <7>[ 51.204089] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:302:HDMI-A-2] disconnected <7>[ 51.204094] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] <7>[ 51.204097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:306:DP-3] <7>[ 51.204362] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:306:DP-3] disconnected <7>[ 51.204365] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] <7>[ 51.204367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:315:DP-4] <7>[ 51.204646] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:315:DP-4] disconnected <7>[ 51.204648] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] enabled? yes <7>[ 51.204651] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:275:DP-1] enabled? no <7>[ 51.204652] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:287:HDMI-A-1] enabled? no <7>[ 51.204654] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:293:DP-2] enabled? no <7>[ 51.204656] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:302:HDMI-A-2] enabled? no <7>[ 51.204657] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:306:DP-3] enabled? no <7>[ 51.204659] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:315:DP-4] enabled? no <7>[ 51.204747] i915 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.204764] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:266:eDP-1] found preferred mode: 2880x1800 <7>[ 51.204767] i915 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 51.204794] i915 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.208227] i915 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 51.210807] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.219250] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7>[ 51.241724] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.241804] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 51.244456] [drm:eb_validate_vma [i915]] EINVAL at eb_validate_vma:509 <7>[ 51.273775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 51.274770] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 51.274837] [IGT] i915_module_load: finished subtest load, SUCCESS <7>[ 51.275035] [IGT] i915_module_load: exiting, ret=0 <7>[ 52.201693] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port G/TC#4: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.201802] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.201955] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port E/TC#2: TC port mode reset (legacy -> disconnected) pin assignment: - max lanes: 4 <7>[ 52.202015] i915 0000:00:02.0: [drm:intel_tc_port_reset_mode [i915]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.635556] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 turning VDD off <7>[ 53.636462] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:265:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 53.636774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 53.637703] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 53.638179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02