igt@i915_pm_rpm@gem-execbuf-stress on shard-rkl@CI_DRM

Detail	Value
Duration	54.96 seconds
Hostname	shard-rkl-7
Igt-Version	IGT-Version: 2.2-g005281c52 (x86_64) (Linux: 6.18.0-CI_DRM_17611-g97dd55b95199+ x86_64)
Out	Using IGT_SRANDOM=1764584891 for randomisation Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] ref_tracker: intel_runtime_pm@ffff88811a559818 has 1/1 users at track_intel_runtime_pm_wakeref+0x90/0xb0 [i915] __intel_runtime_pm_get+0x64/0x220 [i915] i915_display_rpm_get_raw+0x17/0x30 [i915] intel_display_rpm_get_raw+0x20/0x30 [i915] __intel_display_power_put_async+0x3a/0x1c0 [i915] transcoder_ddi_func_is_enabled+0xa7/0xf0 [i915] hsw_get_pipe_config+0x282/0xca0 [i915] intel_crtc_get_pipe_config+0x37/0x60 [i915] intel_modeset_verify_crtc+0x112/0x750 [i915] intel_atomic_commit_tail+0x121e/0x1c40 [i915] intel_atomic_commit+0x2e8/0x330 [i915] drm_atomic_commit+0xaf/0xf0 drm_atomic_helper_set_config+0x82/0xd0 drm_mode_setcrtc+0x407/0xa10 drm_ioctl_kernel+0xb3/0x120 drm_ioctl+0x2d4/0x5a0 Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.537s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.420s) Subtest gem-execbuf-stress: SUCCESS (54.961s)
Err	Starting subtest: gem-execbuf-stress Starting dynamic subtest: smem0 Dynamic subtest smem0: SUCCESS (2.537s) Starting dynamic subtest: extra-wait-smem0 Dynamic subtest extra-wait-smem0: SUCCESS (52.420s) Subtest gem-execbuf-stress: SUCCESS (54.961s)
Dmesg	<6> [253.019995] Console: switching to colour dummy device 80x25 <6> [253.020140] [IGT] i915_pm_rpm: executing <7> [253.021449] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [253.021926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [253.021934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [253.026151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [253.026194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [253.026200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [253.051911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [253.051920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [253.051922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [253.051925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [253.052124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [253.052271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [253.052598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [253.052758] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [253.053120] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [253.053126] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [253.053131] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [253.053136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [253.053139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [253.053142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [253.053144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [253.053147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [253.053150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [253.053152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [253.053155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [253.053157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [253.053160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [253.053163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [253.053165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [253.053168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [253.053171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [253.053173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [253.053176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [253.053179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.053181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.053184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.053186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [253.053189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [253.053192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [253.053194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [253.053197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [253.053199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [253.053202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [253.053205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [253.053207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [253.053210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.053212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.053215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.053218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [253.053267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [253.053271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [253.057466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [253.057502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [253.057505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [253.061723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [253.065420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [253.065425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [253.069633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [253.070023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [253.070027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [253.074245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [253.074494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [253.074497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [253.078711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [253.079013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] <7> [253.079016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [253.083228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected <7> [253.083241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] <7> [253.083244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [253.108974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [253.108981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [253.108984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [253.108986] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [253.109188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [253.109333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [253.109658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [253.109831] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [253.110177] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH) <7> [253.110182] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [253.110187] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE) <7> [253.110192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes: <7> [253.110194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [253.110197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5 <7> [253.110200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa <7> [253.110203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa <7> [253.110205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa <7> [253.110208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa <7> [253.110211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa <7> [253.110213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [253.110216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [253.110218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [253.110221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [253.110224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [253.110226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa <7> [253.110229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [253.110232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [253.110234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.110237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.110240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [253.110242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [253.110245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [253.110247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [253.110250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa <7> [253.110253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6 <7> [253.110255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [253.110258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [253.110260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [253.110263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [253.110266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.110268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.110271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [253.110274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [253.110298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] <7> [253.110301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [253.114505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected <7> [253.114518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] <7> [253.114521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [253.118776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected <7> [253.119062] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:235] <7> [254.133545] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [254.133836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [254.134562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [254.135277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [254.135962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [254.136157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [254.136310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [254.136480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [254.136640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0) <7> [254.136797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [254.136956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0) <7> [254.137112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0) <7> [254.137266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0) <7> [254.137421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [254.137575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [254.137733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0) <7> [254.137887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0) <7> [254.138039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0) <7> [254.138191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0) <7> [254.138342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [254.138494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0) <7> [254.138651] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [254.138802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0) <7> [254.138954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0) <7> [254.139105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0) <7> [254.139260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [254.139417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [254.139571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0) <7> [254.139729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0) <7> [254.139882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0) <7> [254.140034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0) <7> [254.140186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [254.140337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [254.140488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [254.140645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [254.140796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0) <7> [254.140946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0) <7> [254.141096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0) <7> [254.141249] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [254.141401] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0 <7> [254.141574] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [254.141742] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [254.141910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0 <7> [254.142061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0 <7> [254.142213] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [254.142364] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [254.142513] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [254.142667] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [254.142832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0 <7> [254.142989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [254.143157] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz <7> [254.143326] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz <7> [254.143483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset] <7> [254.143643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [254.143801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [254.143955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [254.144108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [254.144260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [254.144412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [254.155907] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [254.174793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1 <7> [254.175583] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7> [254.176386] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0 <7> [254.177101] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A] <7> [254.177793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [254.178443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [254.179158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [254.179811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [254.180447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [254.181112] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [254.181762] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.182657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [254.183352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [254.183957] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [254.185148] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [254.185486] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [254.286843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [254.287600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [254.288329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [254.290280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [254.291149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [254.295884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [254.297257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [254.297521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [254.297842] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [254.298003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [254.298195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [254.389356] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress <6> [254.390507] [IGT] i915_pm_rpm: starting dynamic subtest smem0 <7> [254.391031] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [254.405967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [254.406758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [254.407468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [254.408230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [254.409023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.409814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.410571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.411362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.412146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [254.413620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [254.414313] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [254.416104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [254.418164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [254.418796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [254.431472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [254.431663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [254.431880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.436479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.442834] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [254.467295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [254.467304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [254.467307] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [254.467309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [254.467517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.468446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [254.468790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.468943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [254.468968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.473380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.478353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [254.479381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [254.480798] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [254.480903] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [254.542874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [254.543673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [254.544356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [254.546193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [254.546936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [254.552888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [254.554404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [254.555223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [254.556082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [254.556741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [254.557432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [254.594085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [254.594647] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [254.595359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [254.596136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [254.596924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.597710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.598452] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.599226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.599965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [254.601604] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [254.602291] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [254.603626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [254.605804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [254.606466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [254.618055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [254.618258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [254.618462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.619485] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [254.623009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.653679] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [254.653707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [254.653710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [254.653712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [254.654969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.655117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [254.655440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.655593] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [254.655614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.659819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.726778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [254.728590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [254.734655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [254.736204] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [254.737058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [254.737979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [254.738659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [254.739362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [254.835754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [254.836252] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [254.836992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [254.837764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [254.838532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.839354] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.840148] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.840916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [254.841691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [254.842609] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [254.842767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [254.843127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [254.843862] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [254.844042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [254.852684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [254.852870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [254.853366] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [254.853622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [254.858264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [254.904056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [254.904066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [254.904068] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [254.904071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [254.904271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.905364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [254.905696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [254.906587] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [254.906618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [254.911384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [254.958916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [254.959794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [254.965786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [254.967162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [254.967821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [254.968140] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [254.968309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [254.968507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [255.066749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.067247] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.067996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.068843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.069725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.070488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.071291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.072089] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.072289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.072553] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.072722] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.072999] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.073712] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.073871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.080030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.080159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.080320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.082035] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [255.085003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.116808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.116818] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.116820] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.116823] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.117030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.117180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.117511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.118196] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.118238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.123119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.190733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.191593] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.197618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.199163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.200010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.200902] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.201575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.202272] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [255.296730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.297229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.297992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.298741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.299568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.300569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.301358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.302272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.303113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.303953] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.304787] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.305656] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.308036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.308834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.319199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.319550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.319938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.324642] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [255.324673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.370132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.370142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.370145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.370147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.371352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.371514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.372557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.372711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.372732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.377448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.430895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.431787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.437780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.439154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.439441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.439795] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.439957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.440150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [255.540700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.541200] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.541960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.542740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.543524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.544288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.545058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.545816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.546555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.547306] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.547548] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.547838] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.548549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.548707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.556137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.556374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.557011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.557667] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [255.561607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.604743] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.604753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.604755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.604757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.604991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.606104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.606460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.607388] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.607410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.612117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.662612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.663387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.669463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.671060] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.671883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.672749] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.673412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.674180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [255.773651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [255.774150] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [255.774902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [255.775647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [255.776414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.777202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.777967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.778726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [255.779439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [255.780163] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [255.780322] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [255.780648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [255.781350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [255.781515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [255.788913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [255.789110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [255.789493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [255.790291] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [255.794095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [255.825828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [255.825837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [255.825840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [255.825842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [255.826054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.826202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [255.826528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [255.826676] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [255.826699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [255.831988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [255.894785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [255.895624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [255.902808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [255.904366] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [255.905215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [255.906101] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [255.906797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [255.907562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.006622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.007121] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.007872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.008613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.009582] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.010417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.011223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.012127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.012388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.012704] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.012870] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.013137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.013850] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.014016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.020242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.020369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.020548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.020969] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.025139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.055830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.055840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.055843] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.055846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.056053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.056201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.056536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.056696] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.056720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.061887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.126579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.127387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.133512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.135076] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.135913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.136789] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.137467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.138165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.237604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.238102] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.238859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.239593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.240351] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.241160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.241933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.242887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.243481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.243767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.243926] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.244221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.244936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.245102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.252544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.252680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.252839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.257403] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.257483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.286996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.287006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.287008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.287011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.287220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.287368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.288320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.288484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.288505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.293025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.366621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.367499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.373462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.374877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.375151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.375461] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.375621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.375812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.471601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.472102] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.472857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.473603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.474427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.475237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.476357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.477375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.478130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.478914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.479598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.480428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.482587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.483251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.492465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.492711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.493334] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.493631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.498279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.528997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.529006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.529008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.529011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.529226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.529372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.530382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.530536] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.530558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.535119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.598805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.599662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.605653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.607205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.608025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.608894] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.609563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.610262] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [256.709000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.709549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.710253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.711033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.712147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.713118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.713912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.714566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.714792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.715060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.715218] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.715606] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.716336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.716576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.722748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.722883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.723047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.724291] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [256.727734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.757333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.757343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.757345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.757348] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.758608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.758827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.759197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.759349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.759383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [256.765772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [256.830582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [256.831474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [256.837497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [256.839057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [256.839895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [256.840793] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [256.841468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [256.842205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [256.927862] [IGT] i915_pm_rpm: finished subtest smem0, SUCCESS <6> [256.928951] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0 <7> [256.929377] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [256.943460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [256.943865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [256.944618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [256.945156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [256.945713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.946236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.946766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.947280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [256.947803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [256.948410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [256.948710] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [256.949283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [256.950429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [256.950734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [256.958303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [256.958514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [256.958751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [256.964738] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A] <7> [256.965481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [256.997321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [256.997330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [256.997332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [256.997335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [256.997711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.997863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [256.998189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [256.998346] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [256.998527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [256.998852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.000324] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B] <7> [257.000289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.004704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.009062] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C] <7> [257.070757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [257.071577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.072259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.074118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.075001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.082277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.083883] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.084635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.085440] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.086107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.086682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [257.121484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [257.121985] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [257.122726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [257.123458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [257.124222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.125014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.125778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.126547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [257.127263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [257.127533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [257.127687] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [257.127956] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [257.128660] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [257.128821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [257.134979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [257.135109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [257.135270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [257.139979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [257.141257] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [257.171900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [257.171910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [257.171912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [257.171915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [257.172125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.172270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [257.173274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [257.173454] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [257.173475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [257.177975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [257.246671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [257.247403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [257.253410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [257.254958] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [257.255802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [257.256670] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [257.257347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [257.258043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [262.285019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [262.285516] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [262.286260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [262.287000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [262.287770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [262.288512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [262.288732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [262.288957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [262.289157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [262.289420] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [262.289578] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [262.289848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [262.290544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [262.290702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [262.296893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [262.297022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [262.297184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [262.297898] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [262.301872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [262.332652] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [262.332662] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [262.332664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [262.332667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [262.333625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [262.333772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [262.334106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [262.334257] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [262.334280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [262.339785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [262.406043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [262.406781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [262.411660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [262.413034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [262.413318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [262.413620] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [262.413780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [262.413980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [264.374114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [264.388065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [264.388798] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [264.389508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [264.390264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [264.391060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [264.391848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [264.392645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [264.393409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [264.393623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [264.394039] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [264.394202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [264.394637] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [264.395353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [264.395517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [264.402909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [264.403079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [264.407875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [264.439150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [264.439160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [264.439163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [264.439167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [264.439395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [264.439551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [264.439887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [264.440038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [264.440060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [264.444625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [264.449688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [264.454366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [264.485306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [264.485313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [264.485316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [264.485318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [264.485515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [264.486096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [264.486428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [264.486574] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [264.486597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [264.491045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [264.495917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [264.496090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [264.499577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [264.500895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [264.501152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [264.501455] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [264.501622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [264.501814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [267.513485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [267.513989] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [267.514755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [267.515496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [267.516262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.517060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.517828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.518600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [267.519016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [267.519304] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [267.519524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [267.519857] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [267.520635] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [267.520796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [267.528215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [267.528383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [267.528542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [267.529643] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [267.533145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [267.564230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [267.564240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [267.564242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [267.564245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [267.565189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.565344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [267.565676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [267.565827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [267.565848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [267.570098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [267.637524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [267.638407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [267.643239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [267.644581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [267.644844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [267.645146] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [267.645311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [267.645503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [272.741959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [272.742458] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [272.743199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [272.743944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [272.744713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.745505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.746273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.746935] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [272.747136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [272.747398] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [272.747553] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [272.747847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [272.748557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [272.748716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [272.754947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [272.755079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [272.755240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [272.756362] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [272.759864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [272.790712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [272.790721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [272.790723] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [272.790726] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [272.791848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.791995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [272.792319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [272.792469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [272.792493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [272.796737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [272.861148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [272.862018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [272.869214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [272.870780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [272.871592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [272.872492] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [272.873201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [272.873931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [274.612736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [274.624731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [274.625227] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [274.626019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [274.627074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [274.628017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.628854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.629986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.630643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [274.630848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [274.631330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [274.631533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [274.631889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [274.632622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [274.632788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [274.641453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [274.641627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [274.646395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [274.678231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [274.678239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [274.678242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [274.678244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [274.678455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.679381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [274.679791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.679976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [274.679997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [274.684343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [274.689256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [274.694095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [274.724835] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [274.724843] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [274.724845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [274.724848] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [274.725051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.725196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [274.725518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [274.725943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [274.725976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [274.731983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [274.736917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [274.737089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [274.741726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [274.743121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [274.743404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [274.743719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [274.743880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [274.744071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [277.969435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [277.969934] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [277.970677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [277.971452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [277.972338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.973169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.973540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.973759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [277.973961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [277.974229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [277.974396] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [277.974666] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [277.975376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [277.975533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [277.981703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [277.981833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [277.981999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [277.984303] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [277.986663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [278.017400] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [278.017409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [278.017412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [278.017414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [278.017627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.017775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [278.018106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [278.018260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [278.018280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [278.023421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [278.092607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [278.093451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [278.100630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [278.102034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [278.102337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [278.102659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [278.102891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [278.103130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [283.198273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [283.198771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [283.199516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [283.200259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [283.201024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [283.201818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [283.202584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [283.203341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [283.203995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [283.204269] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [283.204423] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [283.204689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [283.205391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [283.205551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [283.211724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [283.211850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [283.212009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [283.215481] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [283.216704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [283.247329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [283.247339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [283.247342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [283.247344] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [283.247552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [283.247702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [283.248029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [283.248493] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [283.248523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [283.253410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [283.324264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [283.325115] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [283.331271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [283.332864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [283.333718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [283.334626] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [283.335347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [283.336057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [284.852480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [284.864397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [284.864895] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [284.865653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [284.866555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [284.867668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.868500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.869540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.870330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [284.870536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [284.870803] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [284.870988] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [284.871346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [284.872069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [284.872297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [284.879723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [284.879843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [284.884651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [284.916527] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [284.916539] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.916544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [284.916548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [284.917697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.917912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [284.918315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.918469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [284.918491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [284.923819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [284.928721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [284.933596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [284.965478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [284.965485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [284.965488] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [284.965490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [284.965682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.965829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [284.966158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [284.966673] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [284.966707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [284.971607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [284.976488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [284.976659] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [284.981307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [284.982693] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [284.982987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [284.983298] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [284.983458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [284.983698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [288.431875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [288.432369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [288.433106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [288.433866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [288.434632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [288.435419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [288.436188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [288.436975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [288.437333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [288.437597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [288.437763] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [288.438025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [288.438731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [288.438892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [288.446276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [288.446404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [288.446566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [288.447008] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [288.451237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [288.482076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [288.482086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [288.482088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [288.482091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [288.482292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [288.482438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [288.482764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [288.482913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [288.482934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [288.488054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [288.556940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [288.557798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [288.562598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [288.563942] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [288.564195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [288.564498] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [288.564657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [288.564857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [293.664425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [293.664925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [293.665673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [293.666452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [293.667312] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.668136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.668930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.669454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [293.669650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [293.669909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [293.670060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [293.670416] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [293.671117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [293.671283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [293.679919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [293.680166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [293.680530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [293.681671] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [293.685211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [293.717086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [293.717096] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [293.717099] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [293.717101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [293.717308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [293.717481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [293.717830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [293.718002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [293.718025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [293.723126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [293.789410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [293.789838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [293.795604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [293.796971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [293.797230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [293.797533] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [293.797692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [293.797883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [295.093497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [295.105476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [295.105970] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [295.106745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [295.107801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [295.108776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.109663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.110780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.111333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [295.111546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [295.111843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [295.112045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [295.112313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [295.113041] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [295.113202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [295.120630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [295.120826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [295.126726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [295.157935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [295.157944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.157946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [295.157949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [295.158161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.158307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [295.158903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.159126] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [295.159162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [295.163611] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [295.168475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [295.173325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [295.204092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [295.204100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [295.204103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [295.204105] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [295.204307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.205256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [295.205675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [295.205857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [295.205877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [295.210140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [295.215029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [295.215242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [295.218655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [295.219984] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [295.220248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [295.220564] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [295.220786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [295.221032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [298.898761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [298.899260] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [298.900014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [298.900751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [298.901514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.902302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.903068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.903823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [298.904426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [298.904690] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [298.904843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [298.905120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [298.905835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [298.906006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [298.913421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [298.913547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [298.913768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [298.914701] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [298.919530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [298.949437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [298.949447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [298.949449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [298.949452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [298.949663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.950268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [298.950600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [298.950759] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [298.950780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [298.955130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [299.022003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [299.022882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [299.030121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [299.031711] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [299.032587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [299.033539] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [299.034270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [299.035020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [304.132249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [304.132750] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [304.133502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [304.134342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [304.135152] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [304.135932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [304.136738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [304.137013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [304.137255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [304.137519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [304.137679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [304.137952] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [304.138682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [304.138841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [304.146301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [304.146428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [304.146786] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040] <7> [304.146930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [304.151515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [304.182295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [304.182305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [304.182308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [304.182311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [304.182516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [304.182668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [304.183003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [304.183439] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [304.183472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [304.189473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [304.254491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [304.255350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [304.261352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [304.262697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [304.262960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [304.263270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [304.263430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [304.263621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [305.334296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [305.346270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [305.346767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [305.347545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [305.348600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [305.349555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.350468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.351367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.351589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [305.351791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [305.352063] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [305.352307] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [305.352628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [305.353363] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [305.353528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [305.360941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [305.361064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [305.365885] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [305.396868] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [305.396877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.396879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [305.396882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [305.397084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.397703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [305.398121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.398320] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [305.398341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [305.402608] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [305.407530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [305.412400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [305.443210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [305.444299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [305.444302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [305.444305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [305.445562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.445778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [305.446162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [305.446313] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [305.446332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <7> [305.451723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3] <7> [305.456599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [305.456785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [305.461440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [305.462800] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [305.463058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [305.463408] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [305.463634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [305.463887] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [309.350137] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS <6> [309.351348] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS <7> [309.355051] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [309.355258] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [309.355434] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [309.355614] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A] <7> [309.355778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [309.355952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [309.356111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [309.356267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [309.356438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [309.356593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [309.356747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [309.356915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360) <7> [309.357068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [309.357221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360) <7> [309.357373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008) <7> [309.357536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096) <7> [309.357689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [309.357841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [309.357994] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084) <7> [309.358146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089) <7> [309.358297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125) <7> [309.358455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125) <7> [309.358606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [309.358757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360) <7> [309.358910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [309.359062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360) <7> [309.359214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008) <7> [309.359366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096) <7> [309.359525] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [309.359677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [309.359828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084) <7> [309.359981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089) <7> [309.360132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125) <7> [309.360283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125) <7> [309.360440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [309.360592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [309.360743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [309.360896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [309.361049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929) <7> [309.361201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929) <7> [309.361352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929) <7> [309.361526] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7> [309.361706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [309.361857] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [309.362011] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016 <7> [309.362163] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32 <7> [309.362314] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [309.362470] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 <7> [309.362618] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 <7> [309.362767] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 <7> [309.362929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1 <7> [309.363086] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560 <7> [309.363240] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1 <7> [309.363413] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz <7> [309.363581] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz <7> [309.363741] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0 <7> [309.363899] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0 <7> [309.364058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset] <7> [309.364214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [309.364369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [309.364532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [309.364687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [309.364840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0 <7> [309.364993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [309.365146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [309.365299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2 <7> [309.365567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [309.365720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0 <7> [309.365876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125 <7> [309.366034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [309.366190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5 <7> [309.366344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [309.366514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5 <7> [309.366668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [309.366820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965 <7> [309.366972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0 <7> [309.367123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [309.367275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [309.367437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [309.367591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [309.367750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0 <7> [309.367905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries <7> [309.368058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [309.368211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.368363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.368525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.368698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [309.368854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [309.369010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.369162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.369345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [309.369510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [309.369666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [309.369819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [309.369974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [309.370127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [309.370280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7> [309.370439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7> [309.370591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7> [309.370743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7> [309.370895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7> [309.383497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [309.383615] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [309.383783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [309.383979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [309.384227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [309.384480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [309.384702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [309.384922] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage)) <7> [309.385123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [309.385514] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [309.385679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [309.386138] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [309.386866] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [309.387029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [309.394409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [309.394678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [309.394919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [309.395674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [309.397076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [309.397251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B] <7> [309.397415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C] <7> [309.397571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D] <7> [309.397727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A] <7> [309.397879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B] <7> [309.398031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C] <7> [309.398220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [309.398472] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7> [309.398629] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0 <7> [309.398843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1 <7> [309.399074] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [309.399167] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d <7> [309.399970] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [309.400132] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A] <7> [309.418210] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a <7> [309.418501] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation <7> [309.419138] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2] <7> [309.419583] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A] <7> [309.421424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1] <7> [309.422013] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [309.422639] [IGT] i915_pm_rpm: exiting, ret=0 <7> [309.425827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2] <7> [309.447038] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive <7> [309.451680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [309.451689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [309.451691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k <7> [309.451695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0 <7> [309.451896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [309.452047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry <7> [309.452376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1) <7> [309.452542] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [309.457013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1] <6> [309.457141] Console: switching to colour frame buffer device 240x67 <7> [309.461241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [253.021926] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [253.021934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [253.026151] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [253.026194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [253.026200] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [253.051911] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [253.051920] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [253.051922] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [253.051925] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [253.052124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [253.052271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [253.052598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [253.052758] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [253.053120] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [253.053126] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [253.053131] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [253.053136] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [253.053139] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [253.053142] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [253.053144] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [253.053147] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [253.053150] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [253.053152] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [253.053155] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [253.053157] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [253.053160] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [253.053163] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [253.053165] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [253.053168] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [253.053171] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [253.053173] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [253.053176] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [253.053179] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.053181] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.053184] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.053186] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [253.053189] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [253.053192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [253.053194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [253.053197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [253.053199] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [253.053202] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [253.053205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [253.053207] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [253.053210] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.053212] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.053215] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.053218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [253.053267] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [253.053271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [253.057466] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [253.057502] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [253.057505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [253.061723] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [253.065420] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [253.065425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [253.069633] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [253.070023] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [253.070027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [253.074245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [253.074494] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [253.074497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [253.078711] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [253.079013] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1]

<7> [253.079016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [253.083228] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:HDMI-A-1] disconnected

<7> [253.083241] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2]

<7> [253.083244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [253.108974] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [253.108981] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [253.108984] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [253.108986] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [253.109188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [253.109333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [253.109658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [253.109831] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [253.110177] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1366x768": 216 268000 1366 1414 1446 1526 768 771 777 814 0x40 0x6 (CLOCK_HIGH)

<7> [253.110182] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [253.110187] i915 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)

<7> [253.110192] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:HDMI-A-2] probed modes:

<7> [253.110194] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [253.110197] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4088x2304": 10 108000 4088 4152 4280 4536 2304 2305 2308 2340 0x40 0x5

<7> [253.110200] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 15 128430 3840 3889 3921 4000 2160 2163 2169 2195 0x40 0xa

<7> [253.110203] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 11 60000 2880 2888 2984 3040 1800 1802 1820 1845 0x40 0xa

<7> [253.110205] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 13 60000 2560 2568 2664 2720 1600 1602 1620 1645 0x40 0xa

<7> [253.110208] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 15 60000 2560 2568 2664 2720 1440 1442 1460 1485 0x40 0xa

<7> [253.110211] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2048x1536": 17 60000 2048 2056 2152 2208 1536 1538 1556 1581 0x40 0xa

<7> [253.110213] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [253.110216] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [253.110218] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [253.110221] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [253.110224] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [253.110226] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1360x768": 20 25190 1360 1368 1464 1520 768 770 788 813 0x40 0xa

<7> [253.110229] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [253.110232] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [253.110234] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.110237] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.110240] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [253.110242] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [253.110245] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [253.110247] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54054 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [253.110250] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x480": 60 54000 1440 1472 1596 1716 480 489 495 525 0x40 0xa

<7> [253.110253] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x576": 60 46560 1024 1064 1160 1296 576 579 584 599 0x0 0x6

<7> [253.110255] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [253.110258] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [253.110260] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [253.110263] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [253.110266] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.110268] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.110271] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [253.110274] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [253.110298] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1]

<7> [253.110301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [253.114505] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:222:DP-1] disconnected

<7> [253.114518] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3]

<7> [253.114521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [253.118776] i915 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:230:HDMI-A-3] disconnected

<7> [254.133545] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [254.133836] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [254.134562] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [254.135277] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [254.135962] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [254.136157] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [254.136310] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [254.136480] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [254.136640] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2360, found 0)

<7> [254.136797] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [254.136956] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2360, found 0)

<7> [254.137112] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)

<7> [254.137266] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2096, found 0)

<7> [254.137421] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [254.137575] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [254.137733] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)

<7> [254.137887] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)

<7> [254.138039] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)

<7> [254.138191] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)

<7> [254.138342] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [254.138494] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2360, found 0)

<7> [254.138651] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [254.138802] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2360, found 0)

<7> [254.138954] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)

<7> [254.139105] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2096, found 0)

<7> [254.139260] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [254.139417] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [254.139571] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)

<7> [254.139729] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)

<7> [254.139882] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)

<7> [254.140034] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)

<7> [254.140186] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [254.140337] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [254.140488] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [254.140645] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [254.140796] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 139929, found 0)

<7> [254.140946] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 139929, found 0)

<7> [254.141096] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 139929, found 0)

<7> [254.141249] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [254.141401] i915 0000:00:02.0: [drm:intel_dpll_crtc_put [i915]] [CRTC:89:pipe A] releasing DPLL 0

<7> [254.141574] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [254.141742] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [254.141910] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 2016) -> ( 0 - 0), size 2016 -> 0

<7> [254.142061] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb (2016 - 2048) -> ( 0 - 0), size 32 -> 0

<7> [254.142213] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [254.142364] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [254.142513] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [254.142667] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [254.142832] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 0 num active planes 0

<7> [254.142989] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [254.143157] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 69965 kHz -> 0 kHz

<7> [254.143326] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 8746 kHz -> 0 kHz

<7> [254.143483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: no [modeset]

<7> [254.143643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [254.143801] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [254.143955] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [254.144108] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [254.144260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [254.144412] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [254.155907] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [254.174793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_TC1

<7> [254.175583] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]

<7> [254.176386] i915 0000:00:02.0: [drm:intel_dpll_disable [i915]] disabling DPLL 0

<7> [254.177101] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:33:plane 1A]

<7> [254.177793] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [254.178443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [254.179158] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [254.179811] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [254.180447] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [254.181112] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [254.181762] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.182657] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [254.183352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [254.183957] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [254.185148] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [254.185486] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [254.286843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [254.287600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [254.288329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [254.290280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [254.291149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [254.295884] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [254.297257] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [254.297521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [254.297842] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [254.298003] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [254.298195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [254.389356] [IGT] i915_pm_rpm: starting subtest gem-execbuf-stress

<7> [254.405967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [254.406758] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [254.407468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [254.408230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [254.409023] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.409814] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.410571] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.411362] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.412146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [254.413620] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [254.414313] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [254.416104] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [254.418164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [254.418796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [254.431472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [254.431663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [254.431880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.436479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.442834] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [254.467295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [254.467304] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [254.467307] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [254.467309] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [254.467517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.468446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [254.468790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.468943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [254.468968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.473380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.478353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [254.479381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [254.480798] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [254.480903] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [254.542874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [254.543673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [254.544356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [254.546193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [254.546936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [254.552888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [254.554404] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [254.555223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [254.556082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [254.556741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [254.557432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [254.594085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [254.594647] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [254.595359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [254.596136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [254.596924] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.597710] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.598452] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.599226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.599965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [254.601604] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [254.602291] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [254.603626] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [254.605804] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [254.606466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [254.618055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [254.618258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [254.618462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.619485] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [254.623009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.653679] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [254.653707] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [254.653710] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [254.653712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [254.654969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.655117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [254.655440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.655593] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [254.655614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.659819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.726778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [254.728590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [254.734655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [254.736204] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [254.737058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [254.737979] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [254.738659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [254.739362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [254.835754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [254.836252] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [254.836992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [254.837764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [254.838532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.839354] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.840148] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.840916] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [254.841691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [254.842609] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [254.842767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [254.843127] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [254.843862] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [254.844042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [254.852684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [254.852870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [254.853366] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [254.853622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [254.858264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [254.904056] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [254.904066] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [254.904068] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [254.904071] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [254.904271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.905364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [254.905696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [254.906587] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [254.906618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [254.911384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [254.958916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [254.959794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [254.965786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [254.967162] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [254.967821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [254.968140] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [254.968309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [254.968507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [255.066749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.067247] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.067996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.068843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.069725] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.070488] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.071291] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.072089] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.072289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.072553] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.072722] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.072999] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.073712] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.073871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.080030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.080159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.080320] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.082035] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [255.085003] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.116808] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.116818] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.116820] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.116823] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.117030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.117180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.117511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.118196] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.118238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.123119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.190733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.191593] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.197618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.199163] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.200010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.200902] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.201575] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.202272] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [255.296730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.297229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.297992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.298741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.299568] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.300569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.301358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.302272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.303113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.303953] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.304787] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.305656] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.308036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.308834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.319199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.319550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.319938] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.324642] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [255.324673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.370132] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.370142] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.370145] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.370147] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.371352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.371514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.372557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.372711] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.372732] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.377448] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.430895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.431787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.437780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.439154] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.439441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.439795] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.439957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.440150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [255.540700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.541200] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.541960] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.542740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.543524] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.544288] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.545058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.545816] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.546555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.547306] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.547548] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.547838] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.548549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.548707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.556137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.556374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.557011] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.557667] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [255.561607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.604743] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.604753] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.604755] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.604757] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.604991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.606104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.606460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.607388] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.607410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.612117] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.662612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.663387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.669463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.671060] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.671883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.672749] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.673412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.674180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [255.773651] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [255.774150] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [255.774902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [255.775647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [255.776414] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.777202] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.777967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.778726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [255.779439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [255.780163] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [255.780322] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [255.780648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [255.781350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [255.781515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [255.788913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [255.789110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [255.789493] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [255.790291] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [255.794095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [255.825828] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [255.825837] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [255.825840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [255.825842] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [255.826054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.826202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [255.826528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [255.826676] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [255.826699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [255.831988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [255.894785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [255.895624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [255.902808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [255.904366] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [255.905215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [255.906101] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [255.906797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [255.907562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.006622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.007121] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.007872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.008613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.009582] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.010417] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.011223] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.012127] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.012388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.012704] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.012870] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.013137] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.013850] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.014016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.020242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.020369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.020548] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.020969] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.025139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.055830] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.055840] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.055843] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.055846] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.056053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.056201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.056536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.056696] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.056720] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.061887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.126579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.127387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.133512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.135076] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.135913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.136789] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.137467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.138165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.237604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.238102] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.238859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.239593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.240351] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.241160] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.241933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.242887] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.243481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.243767] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.243926] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.244221] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.244936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.245102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.252544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.252680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.252839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.257403] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.257483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.286996] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.287006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.287008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.287011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.287220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.287368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.288320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.288484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.288505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.293025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.366621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.367499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.373462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.374877] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.375151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.375461] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.375621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.375812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.471601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.472102] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.472857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.473603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.474427] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.475237] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.476357] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.477375] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.478130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.478914] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.479598] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.480428] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.482587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.483251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.492465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.492711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.493334] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.493631] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.498279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.528997] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.529006] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.529008] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.529011] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.529226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.529372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.530382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.530536] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.530558] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.535119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.598805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.599662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.605653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.607205] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.608025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.608894] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.609563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.610262] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [256.709000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.709549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.710253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.711033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.712147] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.713118] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.713912] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.714566] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.714792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.715060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.715218] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.715606] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.716336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.716576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.722748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.722883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.723047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.724291] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [256.727734] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.757333] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.757343] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.757345] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.757348] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.758608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.758827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.759197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.759349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.759383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [256.765772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [256.830582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [256.831474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [256.837497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [256.839057] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [256.839895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [256.840793] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [256.841468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [256.842205] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [256.928951] [IGT] i915_pm_rpm: starting dynamic subtest extra-wait-smem0

<7> [256.943460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [256.943865] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [256.944618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [256.945156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [256.945713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.946236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.946766] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.947280] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [256.947803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [256.948410] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [256.948710] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [256.949283] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [256.950429] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [256.950734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [256.958303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [256.958514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [256.958751] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [256.964738] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:89:pipe A]

<7> [256.965481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [256.997321] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [256.997330] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [256.997332] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [256.997335] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [256.997711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.997863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [256.998189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [256.998346] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [256.998527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [256.998852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.000324] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:147:pipe B]

<7> [257.000289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.004704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.009062] i915 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:205:pipe C]

<7> [257.070757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [257.071577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.072259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.074118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.075001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.082277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.083883] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.084635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.085440] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.086107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.086682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [257.121484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [257.121985] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [257.122726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [257.123458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [257.124222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.125014] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.125778] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.126547] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [257.127263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [257.127533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [257.127687] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [257.127956] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [257.128660] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [257.128821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [257.134979] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [257.135109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [257.135270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [257.139979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [257.141257] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [257.171900] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [257.171910] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [257.171912] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [257.171915] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [257.172125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.172270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [257.173274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [257.173454] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [257.173475] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [257.177975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [257.246671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [257.247403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [257.253410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [257.254958] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [257.255802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [257.256670] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [257.257347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [257.258043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [262.285019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [262.285516] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [262.286260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [262.287000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [262.287770] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [262.288512] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [262.288732] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [262.288957] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [262.289157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [262.289420] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [262.289578] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [262.289848] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [262.290544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [262.290702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [262.296893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [262.297022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [262.297184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [262.297898] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [262.301872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [262.332652] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [262.332662] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [262.332664] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [262.332667] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [262.333625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [262.333772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [262.334106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [262.334257] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [262.334280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [262.339785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [262.406043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [262.406781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [262.411660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [262.413034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [262.413318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [262.413620] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [262.413780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [262.413980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [264.374114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [264.388065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [264.388798] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [264.389508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [264.390264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [264.391060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [264.391848] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [264.392645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [264.393409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [264.393623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [264.394039] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [264.394202] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [264.394637] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [264.395353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [264.395517] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [264.402909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [264.403079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [264.407875] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [264.439150] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [264.439160] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [264.439163] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [264.439167] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [264.439395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [264.439551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [264.439887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [264.440038] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [264.440060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [264.444625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [264.449688] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [264.454366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [264.485306] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [264.485313] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [264.485316] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [264.485318] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [264.485515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [264.486096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [264.486428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [264.486574] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [264.486597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [264.491045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [264.495917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [264.496090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [264.499577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [264.500895] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [264.501152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [264.501455] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [264.501622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [264.501814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [267.513485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [267.513989] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [267.514755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [267.515496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [267.516262] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.517060] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.517828] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.518600] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [267.519016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [267.519304] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [267.519524] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [267.519857] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [267.520635] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [267.520796] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [267.528215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [267.528383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [267.528542] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [267.529643] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [267.533145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [267.564230] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [267.564240] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [267.564242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [267.564245] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [267.565189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.565344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [267.565676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [267.565827] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [267.565848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [267.570098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [267.637524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [267.638407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [267.643239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [267.644581] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [267.644844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [267.645146] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [267.645311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [267.645503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [272.741959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [272.742458] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [272.743199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [272.743944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [272.744713] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.745505] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.746273] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.746935] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [272.747136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [272.747398] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [272.747553] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [272.747847] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [272.748557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [272.748716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [272.754947] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [272.755079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [272.755240] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [272.756362] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [272.759864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [272.790712] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [272.790721] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [272.790723] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [272.790726] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [272.791848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.791995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [272.792319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [272.792469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [272.792493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [272.796737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [272.861148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [272.862018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [272.869214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [272.870780] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [272.871592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [272.872492] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [272.873201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [272.873931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [274.612736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [274.624731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [274.625227] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [274.626019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [274.627074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [274.628017] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.628854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.629986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.630643] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [274.630848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [274.631330] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [274.631533] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [274.631889] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [274.632622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [274.632788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [274.641453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [274.641627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [274.646395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [274.678231] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [274.678239] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [274.678242] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [274.678244] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [274.678455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.679381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [274.679791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.679976] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [274.679997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [274.684343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [274.689256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [274.694095] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [274.724835] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [274.724843] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [274.724845] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [274.724848] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [274.725051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.725196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [274.725518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [274.725943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [274.725976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [274.731983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [274.736917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [274.737089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [274.741726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [274.743121] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [274.743404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [274.743719] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [274.743880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [274.744071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [277.969435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [277.969934] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [277.970677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [277.971452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [277.972338] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.973169] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.973540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.973759] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [277.973961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [277.974229] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [277.974396] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [277.974666] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [277.975376] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [277.975533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [277.981703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [277.981833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [277.981999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [277.984303] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [277.986663] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [278.017400] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [278.017409] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [278.017412] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [278.017414] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [278.017627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.017775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [278.018106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [278.018260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [278.018280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [278.023421] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [278.092607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [278.093451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [278.100630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [278.102034] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [278.102337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [278.102659] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [278.102891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [278.103130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [283.198273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [283.198771] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [283.199516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [283.200259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [283.201024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [283.201818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [283.202584] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [283.203341] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [283.203995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [283.204269] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [283.204423] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [283.204689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [283.205391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [283.205551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [283.211724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [283.211850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [283.212009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [283.215481] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [283.216704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [283.247329] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [283.247339] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [283.247342] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [283.247344] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [283.247552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [283.247702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [283.248029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [283.248493] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [283.248523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [283.253410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [283.324264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [283.325115] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [283.331271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [283.332864] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [283.333718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [283.334626] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [283.335347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [283.336057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [284.852480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [284.864397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [284.864895] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [284.865653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [284.866555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [284.867668] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.868500] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.869540] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.870330] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [284.870536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [284.870803] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [284.870988] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [284.871346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [284.872069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [284.872297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [284.879723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [284.879843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [284.884651] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [284.916527] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [284.916539] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.916544] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [284.916548] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [284.917697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.917912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [284.918315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.918469] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [284.918491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [284.923819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [284.928721] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [284.933596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [284.965478] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [284.965485] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [284.965488] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [284.965490] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [284.965682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.965829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [284.966158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [284.966673] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [284.966707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [284.971607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [284.976488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [284.976659] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [284.981307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [284.982693] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [284.982987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [284.983298] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [284.983458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [284.983698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [288.431875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [288.432369] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [288.433106] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [288.433866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [288.434632] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [288.435419] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [288.436188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [288.436975] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [288.437333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [288.437597] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [288.437763] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [288.438025] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [288.438731] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [288.438892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [288.446276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [288.446404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [288.446566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [288.447008] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [288.451237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [288.482076] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [288.482086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [288.482088] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [288.482091] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [288.482292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [288.482438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [288.482764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [288.482913] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [288.482934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [288.488054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [288.556940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [288.557798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [288.562598] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [288.563942] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [288.564195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [288.564498] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [288.564657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [288.564857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [293.664425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [293.664925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [293.665673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [293.666452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [293.667312] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.668136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.668930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.669454] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [293.669650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [293.669909] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [293.670060] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [293.670416] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [293.671117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [293.671283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [293.679919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [293.680166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [293.680530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [293.681671] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [293.685211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [293.717086] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [293.717096] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [293.717099] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [293.717101] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [293.717308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [293.717481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [293.717830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [293.718002] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [293.718025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [293.723126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [293.789410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [293.789838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [293.795604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [293.796971] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [293.797230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [293.797533] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [293.797692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [293.797883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [295.093497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [295.105476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [295.105970] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [295.106745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [295.107801] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [295.108776] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.109663] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.110780] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.111333] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [295.111546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [295.111843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [295.112045] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [295.112313] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [295.113041] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [295.113202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [295.120630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [295.120826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [295.126726] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [295.157935] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [295.157944] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.157946] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [295.157949] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [295.158161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.158307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [295.158903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.159126] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [295.159162] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [295.163611] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [295.168475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [295.173325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [295.204092] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [295.204100] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [295.204103] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [295.204105] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [295.204307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.205256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [295.205675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [295.205857] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [295.205877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [295.210140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [295.215029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [295.215242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [295.218655] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [295.219984] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [295.220248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [295.220564] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [295.220786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [295.221032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [298.898761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [298.899260] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [298.900014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [298.900751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [298.901514] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.902302] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.903068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.903823] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [298.904426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [298.904690] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [298.904843] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [298.905120] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [298.905835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [298.906006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [298.913421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [298.913547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [298.913768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [298.914701] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [298.919530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [298.949437] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [298.949447] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [298.949449] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [298.949452] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [298.949663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.950268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [298.950600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [298.950759] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [298.950780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [298.955130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [299.022003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [299.022882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [299.030121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [299.031711] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [299.032587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [299.033539] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [299.034270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [299.035020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [304.132249] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [304.132750] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [304.133502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [304.134342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [304.135152] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [304.135932] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [304.136738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [304.137013] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [304.137255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [304.137519] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [304.137679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [304.137952] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [304.138682] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [304.138841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [304.146301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [304.146428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [304.146786] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x00000040 [0x00000040]

<7> [304.146930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [304.151515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [304.182295] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [304.182305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [304.182308] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [304.182311] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [304.182516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [304.182668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [304.183003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [304.183439] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [304.183472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [304.189473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [304.254491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [304.255350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [304.261352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [304.262697] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [304.262960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [304.263270] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [304.263430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [304.263621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [305.334296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [305.346270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [305.346767] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [305.347545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [305.348600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [305.349555] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.350468] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.351367] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.351589] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [305.351791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [305.352063] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [305.352307] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [305.352628] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [305.353363] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [305.353528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [305.360941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [305.361064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [305.365885] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [305.396868] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [305.396877] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.396879] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [305.396882] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [305.397084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.397703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [305.398121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.398320] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [305.398341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [305.402608] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [305.407530] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [305.412400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [305.443210] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [305.444299] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [305.444302] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [305.444305] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [305.445562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.445778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [305.446162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [305.446313] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [305.446332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<7> [305.451723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

<7> [305.456599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [305.456785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [305.461440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [305.462800] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [305.463058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [305.463408] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [305.463634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [305.463887] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [309.350137] [IGT] i915_pm_rpm: finished subtest extra-wait-smem0, SUCCESS

<6> [309.351348] [IGT] i915_pm_rpm: finished subtest gem-execbuf-stress, SUCCESS

<7> [309.355051] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:218:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [309.355258] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [309.355434] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [309.355614] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:217:DDI TC1/PHY C] [CRTC:89:pipe A]

<7> [309.355778] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [309.355952] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [309.356111] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [309.356267] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [309.356438] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [309.356593] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [309.356747] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [309.356915] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2360)

<7> [309.357068] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [309.357221] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2360)

<7> [309.357373] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)

<7> [309.357536] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2096)

<7> [309.357689] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [309.357841] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [309.357994] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)

<7> [309.358146] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)

<7> [309.358297] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)

<7> [309.358455] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)

<7> [309.358606] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [309.358757] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2360)

<7> [309.358910] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [309.359062] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2360)

<7> [309.359214] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)

<7> [309.359366] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2096)

<7> [309.359525] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [309.359677] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [309.359828] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)

<7> [309.359981] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)

<7> [309.360132] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)

<7> [309.360283] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)

<7> [309.360440] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [309.360592] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [309.360743] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [309.360896] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [309.361049] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 139929)

<7> [309.361201] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 139929)

<7> [309.361352] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 0, found 139929)

<7> [309.361526] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset

<7> [309.361706] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [309.361857] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [309.362011] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 2016), size 0 -> 2016

<7> [309.362163] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (2016 - 2048), size 0 -> 32

<7> [309.362314] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [309.362470] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 2, 2, 2, 2, 5, 8, 9, 0, 0, 0

<7> [309.362618] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 33, 33, 33, 33, 81, 129, 145, 30, 0, 0

<7> [309.362767] i915 0000:00:02.0: [drm:skl_print_plane_changes [i915]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 38, 38, 38, 38, 91, 143, 161, 31, 0, 0

<7> [309.362929] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:89:pipe A] data rate 559716 num active planes 1

<7> [309.363086] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 560

<7> [309.363240] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point mask 0x1

<7> [309.363413] i915 0000:00:02.0: [drm:intel_cdclk_atomic_check [i915]] [CRTC:89:pipe A] min cdclk: 0 kHz -> 69965 kHz

<7> [309.363581] i915 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [i915]] dbuf bandwidth min cdclk: 0 kHz -> 8746 kHz

<7> [309.363741] i915 0000:00:02.0: [drm:intel_find_dpll [i915]] [CRTC:89:pipe A] allocated DPLL 0

<7> [309.363899] i915 0000:00:02.0: [drm:intel_dpll_crtc_get [i915]] [CRTC:89:pipe A] reserving DPLL 0

<7> [309.364058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:89:pipe A] enable: yes [modeset]

<7> [309.364214] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [309.364369] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [309.364532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [309.364687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [309.364840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] joiner: no, pipes: 0x0

<7> [309.364993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [309.365146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [309.365299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] scanline offset: 2

<7> [309.365567] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [309.365720] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 42, guardband: 44 vsync start: 0, vsync end: 0

<7> [309.365876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: vmin vblank: 1081, vmax vblank: 1081, vmin vtotal: 1125, vmax vtotal: 1125

<7> [309.366034] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [309.366190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 53 139930 1920 2008 2096 2360 1080 1084 1089 1125 0x48 0x5

<7> [309.366344] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [309.366514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 53 139929 1920 2008 2096 2360 1080 1084 1089 1125 0x40 0x5

<7> [309.366668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] crtc timings: clock=139929, hd=1920 hb=1920-2360 hs=2008-2096 ht=2360, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [309.366820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 139929, pipe src: 1920x1080+0+0, pixel rate 139929, min cdclk 69965

<7> [309.366972] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 135, ips linetime: 0

<7> [309.367123] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [309.367275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [309.367437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [309.367591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] dpll_hw_state: cfgcr0: 0x1a6655d, cfgcr1: 0xe84, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [309.367750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x40000000 gamma_enable: 0 csc_enable: 0

<7> [309.367905] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 256 entries

<7> [309.368058] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [309.368211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.368363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.368525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.368698] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [309.368854] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [309.369010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.369162] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.369345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [309.369510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [309.369666] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [309.369819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:33:plane 1A] fb: [FB:234] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [309.369974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [309.370127] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [309.370280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:43:plane 2A] fb: [NOFB], visible: no

<7> [309.370439] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:53:plane 3A] fb: [NOFB], visible: no

<7> [309.370591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:63:plane 4A] fb: [NOFB], visible: no

<7> [309.370743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:73:plane 5A] fb: [NOFB], visible: no

<7> [309.370895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:83:cursor A] fb: [NOFB], visible: no

<7> [309.383497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [309.383615] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [309.383783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [309.383979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [309.384227] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY A (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [309.384480] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY B (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [309.384702] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY C (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [309.384922] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Initializing combo PHY D (Voltage/Process Info : 0.85V dot0 (low-voltage))

<7> [309.385123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [309.385514] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Current CDCLK 12000 kHz, VCO 0 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [309.385679] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [309.386138] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [309.386866] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [309.387029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [309.394409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [309.394678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [309.394919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [309.395674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [309.397076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [309.397251] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:207:DDI B/PHY B]

<7> [309.397415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:217:DDI TC1/PHY C]

<7> [309.397571] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:221:DDI TC2/PHY D]

<7> [309.397727] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:223:DP-MST A]

<7> [309.397879] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:224:DP-MST B]

<7> [309.398031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:225:DP-MST C]

<7> [309.398220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [309.398472] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]

<7> [309.398629] i915 0000:00:02.0: [drm:intel_dpll_enable [i915]] enabling DPLL 0

<7> [309.398843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_TC1

<7> [309.399074] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [309.399167] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000d

<7> [309.399970] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [309.400132] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:33:plane 1A]

<7> [309.418210] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: processing event-flags 0x0000000a

<7> [309.418501] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP: creating arb_session after invalidation

<7> [309.419138] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [309.419583] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:89:pipe A]

<7> [309.421424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:208:HDMI-A-1]

<7> [309.422013] i915 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<7> [309.425827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:218:HDMI-A-2]

<7> [309.447038] i915 0000:00:02.0: [drm:pxp_session_work [i915]] PXP ARB session is alive

<7> [309.451680] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [309.451689] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [309.451691] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD monitor fitHeadless4k

<7> [309.451695] i915 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:218:HDMI-A-2] ELD size 36, SAD count 0

<7> [309.451896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [309.452047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK on first message, retry

<7> [309.452376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus tc1] NAK for addr: 0040 w(1)

<7> [309.452542] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [309.457013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:222:DP-1]

<6> [309.457141] Console: switching to colour frame buffer device 240x67

<7> [309.461241] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:230:HDMI-A-3]

Results for igt@i915_pm_rpm@gem-execbuf-stress